qualification manual electrical...5.0 profiles and requirements 07 6.0 assessment 08 7.0 external...
TRANSCRIPT
ELECTRICAL
Issue 10 0716
Qualification Code 60301491
Qualification Manual
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings
030506
02
Electrotechnical
Contents
10 About EAL
20 Introduction to the Qualification
30 Rule of Combination (Qualification Structure)
40 Centre and Qualification Approval
0750 Profiles and Requirements
0860 Assessment
0970 External Quality Control of Assessment
1 of 11
10Appendix 1 Exam Specification
Appendix 2 Learner Registration and Certification 11
EAL-BR3-QM-Issue10-0716
Page
0110 About EALSince 1964 EAL (Excellence Achievement and Learning) has been the specialist awarding organisation for the industry and related sectors Our commitment to partnering industry together with the focus on our core sectors gives us an unrivalled understanding of the skills employers need This results in qualifications that carry weight and respect with employers which deliver real career benefits for learners
We support the delivery network with an unparalleled level of service to ensure that learners are well prepared for the roles they plan to take on Through its programme of continuous improvement EAL strives to meet the demand from employers for high performing high quality products
11 Equal opportunities and diversity
EAL expects Centres to enable individuals to have equal access to training and assessment for qualifications irrespective of their sex marital status age religion colour race nationality ethnic origin or disability In essence Centres must deliver our qualifications and units in accordance with relevant equalities legislation
Centres are required to have in place a policy to ensure that such discrimination does not occur either directly indirectly or as a result of pressure from other bodies This policy should apply to all satellites Centres and there should be arrangements in place to monitor its application and effectiveness In the unlikely event that complaints relating to issues of inequality cannot be satisfactorily resolved by the Centre learners must be made aware of their right to appeal to EAL through the arrangements outlined in our Appeals Policy
12 Customer service and feedback
Customer service is a fundamental part of EALrsquos commitment to you EAL aims to ensure that all customers receive a high quality efficient service We are always interested in feedback and if you have any comments or feedback on our qualifications products or services please contact the customer services team
EAL Customer ServicesTel +44 (0)1923 652 400Email customercareealorguk
2 of 11EAL-BR3-QM-Issue10-0716
0220 Introduction to the Qualification
What is this qualification
This qualification is for learners who wish to obtain an understanding of the of the building regulations and approved documents which are applicable to electrical installations in dwellings It covers the requirements in both England and Wales It follows the industry guidance as given in the IET Electricianrsquos Guide to the Building Regulations It does not provide an exception to notification requirements for applicable electrical work or provide a direct route to registration with a competent person scheme provider (such as with the NICEIC)
Who is this qualification for
bull Learners who wish to understand the requirements of applicable Building Regulations (including Part P)in relation to electrical work in dwellings in England and Wales
bull Learners who are already familiar with the requirements of BS 7671 in relation to electrical work in dwellings
What does this qualification cover
This qualification comprises of a single knowledge unit which has 5 guided learning hours (GLH) which covers the key aspects of the building regulations and approved documents which are applicable to electrical installations in dwellings The qualification has a total qualification time (TQT) of 6 hours
21 Accreditation and Industry Support for this Qualification
This qualification is accredited at Level 3
22 Achievement of the Qualification
This qualification is gained when the on-screen exam is completed The centre will then be able to apply for the learnerrsquos Certificate
23 Progression Opportunities
This qualification relates tobull EAL Level 3 Award In the Initial Verification and Certification of Electrical Installations 60043374bull EAL Level 3 Award In the Periodic Inspection Testing and Certification of Electrical Installations
60043386bull EAL Level 3 Award In the In-Service Inspections and Testing of Electrical Equipment (PAT)
60043404bull EAL Level 3 Award In Requirements for Electrical Installations BS 7671 June 2008 (2015)
60153210bull EAL Level 4 Award in the Design and Verification of Electrical Installations 60182313bull EAL Apprenticeship qualifications and qualifications in environmental technology systems
Further information can be obtained from the EAL Website or alternatively contact EAL Customer Services Tel +44 (0)1923 652400 Email customercareealorguk
3 of 11EAL-BR3-QM-Issue10-0716
0224 Qualification Support Materials
The following materials are available for this qualification bull Delivery pack contains the qualification unit and the all relevant tutor guidance relating to the
delivery
All materials can be accessed by EAL registered Centres from the EAL Website wwwealorguk
4 of 11EAL-BR3-QM-Issue10-0716
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
030506
02
Electrotechnical
Contents
10 About EAL
20 Introduction to the Qualification
30 Rule of Combination (Qualification Structure)
40 Centre and Qualification Approval
0750 Profiles and Requirements
0860 Assessment
0970 External Quality Control of Assessment
1 of 11
10Appendix 1 Exam Specification
Appendix 2 Learner Registration and Certification 11
EAL-BR3-QM-Issue10-0716
Page
0110 About EALSince 1964 EAL (Excellence Achievement and Learning) has been the specialist awarding organisation for the industry and related sectors Our commitment to partnering industry together with the focus on our core sectors gives us an unrivalled understanding of the skills employers need This results in qualifications that carry weight and respect with employers which deliver real career benefits for learners
We support the delivery network with an unparalleled level of service to ensure that learners are well prepared for the roles they plan to take on Through its programme of continuous improvement EAL strives to meet the demand from employers for high performing high quality products
11 Equal opportunities and diversity
EAL expects Centres to enable individuals to have equal access to training and assessment for qualifications irrespective of their sex marital status age religion colour race nationality ethnic origin or disability In essence Centres must deliver our qualifications and units in accordance with relevant equalities legislation
Centres are required to have in place a policy to ensure that such discrimination does not occur either directly indirectly or as a result of pressure from other bodies This policy should apply to all satellites Centres and there should be arrangements in place to monitor its application and effectiveness In the unlikely event that complaints relating to issues of inequality cannot be satisfactorily resolved by the Centre learners must be made aware of their right to appeal to EAL through the arrangements outlined in our Appeals Policy
12 Customer service and feedback
Customer service is a fundamental part of EALrsquos commitment to you EAL aims to ensure that all customers receive a high quality efficient service We are always interested in feedback and if you have any comments or feedback on our qualifications products or services please contact the customer services team
EAL Customer ServicesTel +44 (0)1923 652 400Email customercareealorguk
2 of 11EAL-BR3-QM-Issue10-0716
0220 Introduction to the Qualification
What is this qualification
This qualification is for learners who wish to obtain an understanding of the of the building regulations and approved documents which are applicable to electrical installations in dwellings It covers the requirements in both England and Wales It follows the industry guidance as given in the IET Electricianrsquos Guide to the Building Regulations It does not provide an exception to notification requirements for applicable electrical work or provide a direct route to registration with a competent person scheme provider (such as with the NICEIC)
Who is this qualification for
bull Learners who wish to understand the requirements of applicable Building Regulations (including Part P)in relation to electrical work in dwellings in England and Wales
bull Learners who are already familiar with the requirements of BS 7671 in relation to electrical work in dwellings
What does this qualification cover
This qualification comprises of a single knowledge unit which has 5 guided learning hours (GLH) which covers the key aspects of the building regulations and approved documents which are applicable to electrical installations in dwellings The qualification has a total qualification time (TQT) of 6 hours
21 Accreditation and Industry Support for this Qualification
This qualification is accredited at Level 3
22 Achievement of the Qualification
This qualification is gained when the on-screen exam is completed The centre will then be able to apply for the learnerrsquos Certificate
23 Progression Opportunities
This qualification relates tobull EAL Level 3 Award In the Initial Verification and Certification of Electrical Installations 60043374bull EAL Level 3 Award In the Periodic Inspection Testing and Certification of Electrical Installations
60043386bull EAL Level 3 Award In the In-Service Inspections and Testing of Electrical Equipment (PAT)
60043404bull EAL Level 3 Award In Requirements for Electrical Installations BS 7671 June 2008 (2015)
60153210bull EAL Level 4 Award in the Design and Verification of Electrical Installations 60182313bull EAL Apprenticeship qualifications and qualifications in environmental technology systems
Further information can be obtained from the EAL Website or alternatively contact EAL Customer Services Tel +44 (0)1923 652400 Email customercareealorguk
3 of 11EAL-BR3-QM-Issue10-0716
0224 Qualification Support Materials
The following materials are available for this qualification bull Delivery pack contains the qualification unit and the all relevant tutor guidance relating to the
delivery
All materials can be accessed by EAL registered Centres from the EAL Website wwwealorguk
4 of 11EAL-BR3-QM-Issue10-0716
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0110 About EALSince 1964 EAL (Excellence Achievement and Learning) has been the specialist awarding organisation for the industry and related sectors Our commitment to partnering industry together with the focus on our core sectors gives us an unrivalled understanding of the skills employers need This results in qualifications that carry weight and respect with employers which deliver real career benefits for learners
We support the delivery network with an unparalleled level of service to ensure that learners are well prepared for the roles they plan to take on Through its programme of continuous improvement EAL strives to meet the demand from employers for high performing high quality products
11 Equal opportunities and diversity
EAL expects Centres to enable individuals to have equal access to training and assessment for qualifications irrespective of their sex marital status age religion colour race nationality ethnic origin or disability In essence Centres must deliver our qualifications and units in accordance with relevant equalities legislation
Centres are required to have in place a policy to ensure that such discrimination does not occur either directly indirectly or as a result of pressure from other bodies This policy should apply to all satellites Centres and there should be arrangements in place to monitor its application and effectiveness In the unlikely event that complaints relating to issues of inequality cannot be satisfactorily resolved by the Centre learners must be made aware of their right to appeal to EAL through the arrangements outlined in our Appeals Policy
12 Customer service and feedback
Customer service is a fundamental part of EALrsquos commitment to you EAL aims to ensure that all customers receive a high quality efficient service We are always interested in feedback and if you have any comments or feedback on our qualifications products or services please contact the customer services team
EAL Customer ServicesTel +44 (0)1923 652 400Email customercareealorguk
2 of 11EAL-BR3-QM-Issue10-0716
0220 Introduction to the Qualification
What is this qualification
This qualification is for learners who wish to obtain an understanding of the of the building regulations and approved documents which are applicable to electrical installations in dwellings It covers the requirements in both England and Wales It follows the industry guidance as given in the IET Electricianrsquos Guide to the Building Regulations It does not provide an exception to notification requirements for applicable electrical work or provide a direct route to registration with a competent person scheme provider (such as with the NICEIC)
Who is this qualification for
bull Learners who wish to understand the requirements of applicable Building Regulations (including Part P)in relation to electrical work in dwellings in England and Wales
bull Learners who are already familiar with the requirements of BS 7671 in relation to electrical work in dwellings
What does this qualification cover
This qualification comprises of a single knowledge unit which has 5 guided learning hours (GLH) which covers the key aspects of the building regulations and approved documents which are applicable to electrical installations in dwellings The qualification has a total qualification time (TQT) of 6 hours
21 Accreditation and Industry Support for this Qualification
This qualification is accredited at Level 3
22 Achievement of the Qualification
This qualification is gained when the on-screen exam is completed The centre will then be able to apply for the learnerrsquos Certificate
23 Progression Opportunities
This qualification relates tobull EAL Level 3 Award In the Initial Verification and Certification of Electrical Installations 60043374bull EAL Level 3 Award In the Periodic Inspection Testing and Certification of Electrical Installations
60043386bull EAL Level 3 Award In the In-Service Inspections and Testing of Electrical Equipment (PAT)
60043404bull EAL Level 3 Award In Requirements for Electrical Installations BS 7671 June 2008 (2015)
60153210bull EAL Level 4 Award in the Design and Verification of Electrical Installations 60182313bull EAL Apprenticeship qualifications and qualifications in environmental technology systems
Further information can be obtained from the EAL Website or alternatively contact EAL Customer Services Tel +44 (0)1923 652400 Email customercareealorguk
3 of 11EAL-BR3-QM-Issue10-0716
0224 Qualification Support Materials
The following materials are available for this qualification bull Delivery pack contains the qualification unit and the all relevant tutor guidance relating to the
delivery
All materials can be accessed by EAL registered Centres from the EAL Website wwwealorguk
4 of 11EAL-BR3-QM-Issue10-0716
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0220 Introduction to the Qualification
What is this qualification
This qualification is for learners who wish to obtain an understanding of the of the building regulations and approved documents which are applicable to electrical installations in dwellings It covers the requirements in both England and Wales It follows the industry guidance as given in the IET Electricianrsquos Guide to the Building Regulations It does not provide an exception to notification requirements for applicable electrical work or provide a direct route to registration with a competent person scheme provider (such as with the NICEIC)
Who is this qualification for
bull Learners who wish to understand the requirements of applicable Building Regulations (including Part P)in relation to electrical work in dwellings in England and Wales
bull Learners who are already familiar with the requirements of BS 7671 in relation to electrical work in dwellings
What does this qualification cover
This qualification comprises of a single knowledge unit which has 5 guided learning hours (GLH) which covers the key aspects of the building regulations and approved documents which are applicable to electrical installations in dwellings The qualification has a total qualification time (TQT) of 6 hours
21 Accreditation and Industry Support for this Qualification
This qualification is accredited at Level 3
22 Achievement of the Qualification
This qualification is gained when the on-screen exam is completed The centre will then be able to apply for the learnerrsquos Certificate
23 Progression Opportunities
This qualification relates tobull EAL Level 3 Award In the Initial Verification and Certification of Electrical Installations 60043374bull EAL Level 3 Award In the Periodic Inspection Testing and Certification of Electrical Installations
60043386bull EAL Level 3 Award In the In-Service Inspections and Testing of Electrical Equipment (PAT)
60043404bull EAL Level 3 Award In Requirements for Electrical Installations BS 7671 June 2008 (2015)
60153210bull EAL Level 4 Award in the Design and Verification of Electrical Installations 60182313bull EAL Apprenticeship qualifications and qualifications in environmental technology systems
Further information can be obtained from the EAL Website or alternatively contact EAL Customer Services Tel +44 (0)1923 652400 Email customercareealorguk
3 of 11EAL-BR3-QM-Issue10-0716
0224 Qualification Support Materials
The following materials are available for this qualification bull Delivery pack contains the qualification unit and the all relevant tutor guidance relating to the
delivery
All materials can be accessed by EAL registered Centres from the EAL Website wwwealorguk
4 of 11EAL-BR3-QM-Issue10-0716
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0224 Qualification Support Materials
The following materials are available for this qualification bull Delivery pack contains the qualification unit and the all relevant tutor guidance relating to the
delivery
All materials can be accessed by EAL registered Centres from the EAL Website wwwealorguk
4 of 11EAL-BR3-QM-Issue10-0716
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0330 Rule of Combination (Qualification Structure)This qualification has 5 Guided Learning Hours (GLH) It has a Total Qualification Time (TQT) of 6 hours - which is the notational time required by the learner to complete the qualification It will be obtained by the learner once they have completed the singe unit below
Unit Unit title GLH Ofqual Code
BR3-01 Building Regulations for Electrical Installations in Dwellings 5 J6150625
5 of 11EAL-BR3-QM-Issue10-0716
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0440 Centre and Qualification Approval Centres wishing to run the qualifications will need to comply with the Qualification Manual and EALrsquos centre recognition criteria for these qualifications upon accreditation and launch Centres must also put in place the appropriate physical and human resources and administration systems to effectively run the qualifications Please refer to Section 5 for the requirements of centre staff involved in the delivery of the qualifications
For existing EAL centres to put the qualification on your centre remitbull To add these qualifications to your centre qualification remit create and complete a qualification
approval application form in Smarter Touch and submit to EAL
For non EAL centres to gain centre approval to run the qualificationbull Please contact the EAL Customer Services Department who will be delighted to hear from you
Tel +44 (0)1923 652400Email customercareealorguk
6 of 11EAL-BR3-QM-Issue10-0716
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0550 Profiles and RequirementsThe staff involved in the delivery of these qualifications at the Centre must meet ALL of the requirements in this section
51 Staff Responsible for Registering and Certification of Learners
Centres are required to appoint a suitable member of staff who can take responsibility for registering learners onto the qualification submitting entries for exams to EAL They may also be responsible for applying to EAL for learner certificates
52 Teaching Staff
These personnel must have the necessary knowledge and understanding of the assessment criteria and learning outcomes they are delivering They must also understand the structure and content of the qualification
It is a recommendation that the teaching staff will bull Have 2 years experience in teachingtraining
or bull Are working towards an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development
trainer units)or
bull Hold an appropriate teachingtraining qualification (eg Cert Ed or Learning amp Development trainer units)
53 Learners There are no formal entry requirements for this qualification however centres should ensure that the learners have the potential to achieve the qualification Learners must have the minimum levels of literacy and numeracy to complete the learning outcomes and assessment It is recommended that learners have an understanding of the requirements of BS 7671 and are working in the electrical industry
Centres should make learners with particular requirements aware of the content of the qualification and they should be given every opportunity to successfully complete the qualification EAL will consider any reasonable suggestions for and from those with disabilities that would help them to achieve the learning outcomes without compromising the standards required
54 Age Restrictions
Learners must be at least 16 years old
7 of 11EAL-BR3-QM-Issue10-0716
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0660 Assessment This qualification is assessed by a 20 question on-screen exam The exam is lsquoopen bookrsquo and learners will require a copy of the IET Electricianrsquos Guide to the Building Regulations A calculator is also allowed The test will cover the requirements for both England and Wales Please refer to Appendix 1 for the Centre exam specification
8 of 11EAL-BR3-QM-Issue10-0716
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
0770 External Quality Control of Assessment There are two major activities in which EAL interacts with the Centre in relation to the External Quality Control of Assessment for this qualification and these are
bull Recognition When a Centre decides to offer the qualification the EAL External Quality Assurer(EQA) ensures that the Centre is suitably equipped and prepared for delivery and assessment
bull Engagement Throughout the ongoing delivery of the qualification EAL through EQA monitoringand other mechanisms will review the quality and consistency of assessment and internal qualityassurance and recommend actions to address issues of concern
RecognitionIn granting approval EAL normally through its EQAs will ensure that the prospective Centre
bull Meets any procedural requirements specified by EALbull Has sufficient and appropriate physical and staff resourcesbull Meets relevant health and safety andor equality and access requirementsbull Has a robust plan for the delivery assessment and QA for the qualifications (including where
appropriate scope for involving employers)
EAL may decide to visit the Centre to view the evidence provided
Engagement EAL through EQA Engagement and other mechanisms will ensure that
bull A strategy is developed and deployed for the on-going monitoring of the centre ndash this will be basedon an active risk assessment of the Centre and will include details of the learner assessor andinternal quality assurerrsquos sampling strategy and the rationale behind this
bull The Centrersquos internal quality assurance processes are effective in learner assessmentbull Outcomes of internal assessment are verified through sampling to ensure standards are being
maintainedbull Sanctions are applied to a Centre where necessary and that corrective actions are taken by the
Centre and monitored by the EQAbull Reviews of EALrsquos external auditing arrangements are undertaken
9 of 11EAL-BR3-QM-Issue10-0716
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
A1Appendix 1 Centre Test Specification
10 of 11EAL-BR3-QM-Issue10-0716
Unit BR3-01 Building Regulations for Electrical Installations in Dwellings
Assessment type On-Screen exam
Time allowed 40 minutes
Calculator allowed
Open book Requires IET Electricianrsquos Guide to the Building Regulations
The test will cover the requirements for both England and Wales
The examination will cover the knowledge learning outcomes of the unit as follows
LearningOutcome Learning Outcome Title Number of
Questions
1 Understand the requirements of the Building Regulations for electrical installations in dwellings 2
2 Understand the requirements of the applicable Building Regulations andApproved Documents 18
Total 20
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
A2Appendix 2 Learner Registration and CertificationLearners must be registered with EAL on a code which relates to the qualification -this must be completed prior to assessment Both learner registration and certification can be completed on line at the EAL Website wwwealorguk For paper based registration and certification use forms CAF1 and CAF1A These are located on the EAL Website for guidance on registration and Certification please refer to the Registration and Certification User Guide
To register the learner on the chosen qualificationpathway code
Qualification title Code
EAL Level 3 Award in the Building Regulations for Electrical Installations in Dwellings 60301491
For further information please contact EAL Customer Services +44 (0)1923 652 400
11 of 11EAL-BR3-QM-Issue10-0716
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016
All the material in this publication is copyright copy Excellence Achievement amp Learning Limited 2016