ps00-frida - pro-ject · ps00-frida is joint project of pro-ject audio systems and parov stelar,...

2
PRODUCT INFORMATION Technical data and price changes reserved. Seite 1/2 PRO-JECT AUDIO SYSTEMS www.project-audio.com PS00-Frida Limited turntable edition based on highly acclaimed Debut Carbon Esprit MSRP 550 € (incl. VAT) Speed: 33, 45 (manual speed change) Drive principle: belt drive Wow and flutter: +/- 0,10% Speed drift: +/- 0,80% Platter: 300mm acrylic platter Main platter bearing spindle: stainless steel Signal to noise: - 68dB Tonearm: 8,6” Carbon Effective arm length: 218,5 mm Overhang: 18,5mm Effective tonearm mass: 6,0 g Tracking force: 10 - 30mN Included accessory: 15 volts DC / 0,8A power supply, dust cover Standby power consumption: <1 watt Dimensions: 415 x 118 x 320mm (WxHxD) lid closed Weight: 5,6 kg net • “Must have” for fans of Parov Stelar and vinyl • Exclusive design with 7 printing layers • 8,6” carbon fibre tonearm • Non-resonant acrylic platter • Ultra silent belt drive system with ultra precision frequency DC-driven AC generator and synchronous motor • TPE motor suspension • Hightech damping feet made from TPE for up to 20% higher listening levels without distortion • Ortofon cartridge 2M red

Upload: others

Post on 01-Oct-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PS00-Frida - Pro-Ject · PS00-Frida is joint project of Pro-Ject Audio Systems and Parov Stelar, that sets an audio landmark! Based on the worldwide highly acclaimed DEBUT CARBON

PRODUCT INFORMATION

Technical data and price changes reserved.Seite 1/2

PRO-JECT AUDIO SYSTEMSwww.project-audio.com

PS00-FridaLimited turntable edition based on highly

acclaimed Debut Carbon Esprit MSRP 550 € (incl. VAT) Speed: 33, 45 (manual speed change)

Drive principle: belt drive Wow and flutter: +/- 0,10%Speed drift: +/- 0,80%Platter: 300mm acrylic platterMain platter bearing spindle: stainless steel Signal to noise: - 68dBTonearm: 8,6” CarbonEffective arm length: 218,5 mmOverhang: 18,5mmEffective tonearm mass: 6,0 gTracking force: 10 - 30mNIncluded accessory: 15 volts DC / 0,8A power supply, dust coverStandby power consumption: <1 wattDimensions: 415 x 118 x 320mm (WxHxD) lid closedWeight: 5,6 kg net

• “Must have” for fans of Parov Stelar and vinyl

• Exclusive design with 7 printing layers

• 8,6” carbon fibre tonearm

• Non-resonant acrylic platter

• Ultra silent belt drive system with ultra precision frequency

DC-driven AC generator and synchronous motor

• TPE motor suspension

• Hightech damping feet made from TPE for up to 20%

higher listening levels without distortion

• Ortofon cartridge 2M red

Page 2: PS00-Frida - Pro-Ject · PS00-Frida is joint project of Pro-Ject Audio Systems and Parov Stelar, that sets an audio landmark! Based on the worldwide highly acclaimed DEBUT CARBON

PRODUCT INFORMATION

Technical data and price changes reserved.Seite 2/2

PRO-JECT AUDIO SYSTEMSwww.project-audio.com

Limited „Parov Stelar“ Edition !

PS00-Frida is joint project of Pro-Ject Audio Systems and Parov Stelar, that sets an audio landmark! Based on the worldwide highly acclaimed DEBUT CARBON ESPRIT (DC), which set a new standard for analogue turntables for the next decade. PS00-Frida is a real eye-catcher and meets the growing demand of all fans of high-class, but affordable vinyl record players and attracts real Parov Stelar fans!

A first class tonearm made from carbon fibre ensures superior stiffness and significantly reduced resonances than metal tonearms. This material normally is extensi-vely used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with an acrylic platter the carbon tonearm offers outstanding sound quality levels! The approved

belt drive design offers low noise AC motor with effective TPE (Thermo Plastic Elastomere) motor decoupling, and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration. Due to this effort 20% higher listening levels without the risk of distortion can be achieved.

PS00-Frida is available as a strictly limited edition of only 1.000 pieces worldwide!