PRODUCT INFORMATION
Technical data and price changes reserved.Seite 1/2
PRO-JECT AUDIO SYSTEMSwww.project-audio.com
PS00-FridaLimited turntable edition based on highly
acclaimed Debut Carbon Esprit MSRP 550 € (incl. VAT) Speed: 33, 45 (manual speed change)
Drive principle: belt drive Wow and flutter: +/- 0,10%Speed drift: +/- 0,80%Platter: 300mm acrylic platterMain platter bearing spindle: stainless steel Signal to noise: - 68dBTonearm: 8,6” CarbonEffective arm length: 218,5 mmOverhang: 18,5mmEffective tonearm mass: 6,0 gTracking force: 10 - 30mNIncluded accessory: 15 volts DC / 0,8A power supply, dust coverStandby power consumption: <1 wattDimensions: 415 x 118 x 320mm (WxHxD) lid closedWeight: 5,6 kg net
• “Must have” for fans of Parov Stelar and vinyl
• Exclusive design with 7 printing layers
• 8,6” carbon fibre tonearm
• Non-resonant acrylic platter
• Ultra silent belt drive system with ultra precision frequency
DC-driven AC generator and synchronous motor
• TPE motor suspension
• Hightech damping feet made from TPE for up to 20%
higher listening levels without distortion
• Ortofon cartridge 2M red
PRODUCT INFORMATION
Technical data and price changes reserved.Seite 2/2
PRO-JECT AUDIO SYSTEMSwww.project-audio.com
Limited „Parov Stelar“ Edition !
PS00-Frida is joint project of Pro-Ject Audio Systems and Parov Stelar, that sets an audio landmark! Based on the worldwide highly acclaimed DEBUT CARBON ESPRIT (DC), which set a new standard for analogue turntables for the next decade. PS00-Frida is a real eye-catcher and meets the growing demand of all fans of high-class, but affordable vinyl record players and attracts real Parov Stelar fans!
A first class tonearm made from carbon fibre ensures superior stiffness and significantly reduced resonances than metal tonearms. This material normally is extensi-vely used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with an acrylic platter the carbon tonearm offers outstanding sound quality levels! The approved
belt drive design offers low noise AC motor with effective TPE (Thermo Plastic Elastomere) motor decoupling, and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration. Due to this effort 20% higher listening levels without the risk of distortion can be achieved.
PS00-Frida is available as a strictly limited edition of only 1.000 pieces worldwide!
