promass q for the process industry · 2018-08 promass q for the process industry accuracy...

2018-08

Products Solutions Services

Promass Q for the process industry

A unique Coriolis innovation from Endress+Hauser

Slide 1 Product Management Endress+Hauser Flowtec

2018-08


Promass Q – Design

• Coriolis flowmeter

• Available on Proline 300/500

• Light weight, compact and drainable

• Constructed entirely from 316/316L stainless steel

• Four line sizes: DN 25 to 100 (1" to 4")

• All industry standard process connections:

• ASME, EN, JIS

• Process temperature range:

• Standard -50 °C to 205 °C (-58 °F to 400 °F)

• Cryogenic -196 °C to 180 °C (-320 °F to 356 °F)

• Max. process pressure: 102.1 bar (1480 psi)


2018-08


Size & weight

Promass Q face to face dimensions (installation length) are identical to

Promass F of the same nominal line size and flange connection!


2018-08


Key improvements & features

8 new improvements and features!

Pressure Drop

Turndown

Size &Weight

Safety

RepeatabilityProcess

Sensitivity

Entrained Gas

Density

Designed for real benefit!


2018-08


Applications for Promass Q – Process

Hydrocarbon custody transfer

LNG NGL light hydrocarbons cryogenicsHeavy crudes

Well cementLiquid leg of separators


2018-08

Entrained Gas

Pressure Drop



Turndown

Size &Weight

Safety


Sensitivity

Density


2018-08


Changing viscosity and density sensitivity


2018-08


Density vs. density


2018-08


Density vs. viscosity


2018-08


Water across pressure & temperature


2018-08


Isobutanol across pressure & temperature


2018-08


Ambient temperature sensitivity on density

But what about when my meter is installed:

HERE!?

- OR -

HERE?!


2018-08


Ambient temperature sensitivity on density


2018-08

Pressure Drop



Turndown

Size &Weight

Safety


Sensitivity

Entrained Gas

Density


2018-08


Promass Q has a very wide useable turndown

Yellow line Blue line

Flow where thebase accuracy begins

Flow where 1 barpressure loss is reached

Useable turndown

1 bar pressure loss

0.05

Operating conditions

Promass QDN 100 (4”)


2018-08


Pressure drop specifications

Promass Q offers the highest flowrates at the lowest pressure drops

Opens the ability to utilize smaller meters with less pressure loss!


2018-08

Entrained Gas

Pressure Drop



Turndown

Size &Weight

Safety


Sensitivity

Density


2018-08


Accuracy statements & GVF

• All three of the above have 15% GVF.• Will a Coriolis meter respond in the same way to these situations? • No. It cannot due to the differing motion of the fluid relative to the tube motion.

• Over simplification of reality can be misleading. Making a hard stated accuracy specification is not responsible nor is it especially useful.


2018-08


Multi-Frequency Technology (MFT) – Patented!

Raw ሶ𝑚 und

1st mode

2ndmode

Corrected ሶ𝒎 and

Active compensation!

MFT - the same set of dual tubes are

oscillated at two different resonant

frequencies or modes simultaneously.

The Coriolis meter is measuring the same

fluid with the same amount of entrained

gas, however the way these two modes

react to this will be different.

Through analyzing these results and the

unique resonance properties of the two

modes, we are then able to effectively

and actively compensate for the

associated measurement error.

Additional information

*Animation exaggerated for clarity


2018-08


Outgassing field trial results


2018-08


Entrained gas examples – Process

Ou

tgas

sin

g:

Cry

oge

nic

N2

:

Wel

l cem

ent:

2% GVF | <0.5% | mass flow 3% GVF | 0.3% | mass flow

10% GVF | <1% | density

Em

uls

ion

:

5% GVF | <1% | mass flow

60

cP o

il:

8% GVF | <2% | mass flow


2018-08


Thank you very much for your attention


2018-06


Proline Promass A

For process applications

Slide 1 Coriolis Product Management

2018-06

Smallest footprint for integration – compact and lightweight

Proline Promass A – for process applications

DN 04 (1/8") 5.15 kg (11 lbs)310 mm (12.2 in)

DN 02 (1/12") 3.3 kg (7 lbs)264 mm (10.39 in)

DN 01 (1/24") 1.75 kg (4 lbs)187 mm (7.36 in)

(sensor only, fitted with VCO)


2018-06

New Promass A – key characteristics at a glance


Topic New Promass A design

Measuring tube materials 1.4435 (316/316L) stainless steel & Alloy C22

Sensor housing material Complete external design in 316L stainless steel (suitable for offshore)

Max pressure rating 430.9 bar / 6250 psi (corresponds to ASME B16.5 Material Group 3.8)

Medium temperature range -50 to +205 °C (-58 to +401 °F)

Mass and volume flow accuracy liquids ±0.10%

Mass and volume flow repeatability liquids ±0.05%

Mass flow accuracy gas ±0.35%

Mass flow repeatability gas ±0.15%

Density accuracy ±0.0005 g/cm3 field density & ±0.002 g/cm3 wide range density

Temperature accuracy (ref. conditions) ±0.5 °C (±0.9 °F)

Transmitter and process connection offer See next slides


2018-06

Transmitter overview new Promass A sensor design


Transmitter

Material

100 200 300 500500

digital

Standard

aluminum

Heavy duty, offshore

stainless, cast CF3M “316L”- - -

Hygienic compact

stainless, sheet-

Hygienic ultra-compact

stainless, sheet- -


2018-06

Process connection offer overview


Flanges

1.4404 (316/316L) Alloy C22

Tri-Clamp

1.4435 (316L)

4-VCO-4 G ¼" NPT ¼"

1/2"≤ 40 bar (580 psi)

EN 1092-1

≤ PN 400

JIS B2220

≤ 63K

ASME B16.5

≤ Cl. 2500 (430.9 bar (6250 psi))

Couplings and threads

1.4404 (316/316L)Alloy C22

All of the above ≤ 430.9 bar (6250 psi)

Note: All process connections are directly welded on the sensor (no adapters needed)

All flanges: DN 15 (½")


2018-06

Process connection offer overview


Tri-Clamp and all flanges: DN 15 (1/2’’) (*) In addition also several Alloy C22 lap joint flange versions are available

Standard –All wetted parts in st. steel

Standard –All wetted parts in Alloy C22

High pressure –Measuring tube always in C22

Tri-Clamp

≤ PN 100 ≤ PN 100 (*) ≤ PN 400 (St. steel or C22)

≤ Cl. 600 ≤ Cl. 600 (*) ≤ Cl. 2500 (St. steel or C22)

≤ JIS 63K ≤ JIS 63K (*)

4-VCO-4 4-VCO-4 4-VCO-4 (C22 only)

G 1/4" internal thread G 1/4“ internal thread G 1/4" int. thread (C22 only)

NPT 1/4" internal thread NPT 1/4" internal thread NPT 1/4" int. thread (C22 only)


2018-06

• Superior corrosion resistance – complete exterior

sensor design in 316L as standard

• Directly welded process connections (no gaskets or

adapters)

• International hazardous area approvals

• Developed according to IEC 61508 (SIL)

• Sensor housing burst pressure >100 bar (1450 psi)

• Additional safety layer – rupture disk

• always included for high pressure versions

• optional for standard versions

• Significant reduced risk of particle clogging due to

single tube design (cp. to dual tube systems with

similar flow rate capacity, see next slide)

Safety by design


Predefined breaking point – ruptures at a pressure of 10 to 15 bar (145 to 217.5 psi)

Rupture disk


2018-06

Significant reduced risk of particle clogging due to single tube design

Promass A vs competition – reduced risk of particle clogging


Other brand – dual tube designPromass A – single tube design


2018-06


Services, non destructive tests (NDTs), approvals and certificates

A full range of services, NDTs, approvals and certificates are available to provide documented evidence

that Promass A fulfills its stated high quality standards. How to order:

• Group 570, option

• HA: Cleaned from oil + grease (wetted parts)


• JB: Pressure test

• JC: 3.1 material certificate wetted parts + sensor housing

• JK: Positive material identification (PMI) test

• KE, KI, KN, KS: X-ray test (film) acc. to ISO 10675-1, ASME B31.3, ASME VIII & NORSOK M-601

• K5, K6, K7, K8: X-ray test (digital) acc. to ISO 10675-1, ASME B31.3, ASME VIII & NORSOK M-601


• LA: SIL

• LD: CRN

• LN: Sensor housing burst pressure, type test

• LR: NACE MR0175 / ISO 15156

• LS: NACE MR0103 / ISO 17945


2018-06

New dimension of low flow measurement – innovative robust sensor design



2018-06

New dimension of low flow measurement – innovative robust sensor design


• Higher frequency vibrational symmetry very stable zero point

• Sets the bar for small DN measuring performance

PRELIMINARY VIDEO – WORK IN PROGRESS


2018-06

Useable turndown – definition


Green line Blue line

Flow where thebase accuracy begins

Flow where 1 barpressure loss is reached

Useable turndown

1 barpressure loss


2018-06

New Promass A design with significantly improved useable turndown


Improvedzero point stability

Largermeasuring

tubes

HP: High pressure


2018-06

New Promass A DN 01 – new dimension of low flow measurement


1.0%0.05 kg/h

=0.8 g/min

0.1%0.48 kg/h

= 8.0 g/min

0.1%1.2 kg/h

= 20.0 g/min

Other Brand DN 06

Other Brand DN 04

Other Brand DN 02

Other Brand DN 01


2018-06

…including high pressure applications


0.1%0.8 kg/h

= 13.3 g/min

0.1%4.4 kg/h

= 73.3 g/min

1.0%0.08 kg/h

=1.3 g/min

Other Brand DN 04-HP

Other Brand DN 02-HP


HP: High pressure

2018-06

New design – stable performance over wide a viscosity range



2018-06

Recommended when there are concerns about the mechanical strength of the

piping or the rotational stability of the installation (Tri-Clamp, VCO, G, NPT)

Universal sensor holder


One design for all DN/purposes

Sensorneck

Wall, table or pipe

Promass A 300DN 04 VCO pipe mount

Sensorholder

How to order

• Group 620, option PR: Sensor holder (for wall, table and pipe mount)

• As an accessory: material number 71392563


2018-06

Heating jacket for the new Promass A sensor design

For applications where keeping a constant process temperature is important


DN 01(¹⁄₂₄")

DN 02 (¹⁄₁₂")

DN 04(¹⁄₈")

How to order

• Group 620, option RB: Heating jacket, G ½" internal thread

• Group 620, option RD: Heating jacket, NPT ½" internal thread (served with a "G NPT" adapter)

• Via separate structure DK8003 (material number 71386499)


2018-06

Proline Added Values


Data storage concept

Seamless system integration Web server

Heartbeat Technology

Operation concept (HMI)

W@M Life Cycle Management


2018-06

Heartbeat Technology – reliable and safe processes


FunctionalSafety (SIL)

Developed acc. to

IEC 61508


2018-06


Promass A – The lightweight champion for lowest flow rates and highest performance

Thank you


promass q for the process industry · 2018-08 promass q for the process industry accuracy...

Documents