5

Y E A WR A R RA

NT

Y

www.ilp-inc.com Industrial Lighting Products

ORDERING GUIDE:

407-478-3759

WET LOCATION4FT AMAZON PG - 70W LED

SUITABLE APPLICATIONS• Food Processing and Preparation

(SS Latches)• Pool Areas (SS Latches)• Car Washes (SS Latches)• Low Bay Fixtures for Commercial

and Industrial Buildings

FEATURES• 4 Foot Enclosure Suitable for Wall or Ceiling Mount •• Impact Resistant, Linear Ribbed Acrylic Frosted Lens (RAFL)

Standard, Linear Ribbed Clear Polycarbonate Lens Optional

• DesignLights Consortium® (2)

LED SYSTEMBoard (LG Chips) 4 x 56Calculated L70 (TM-21) 85,000 hoursDelivered Lumens 6,952 lmTotal Input Watts 73.77 W

94.2 lm/WCorrelated Color Temperature (CCT) 5000 KColor Rendering Index (CRI) > 80Max Ambient Temp 112˚ FUniversal Driver 120-277 V

*Stainless Steel latches are recommended for the following applications: swimming pools due to chlorine, food processing due to cleaning chemicals, car washes due to chemicals used, agriculture due to ammonia

REPLACES 250W MH

LED System data above based on WTPG4-70WLED-UNIV-5000K-RAFL (1) LED Lumen Maintenance Estimates based on TM-21 projections for the light source at 25˚C ambient

Project Name:

Catalog Number:

Volts / Watts:

Fixture Type:

Lamps / Board:

WTPG 70WLED UNIV 5000K RAFL

Series LED Driver Color Options WTPG 4ft Parking Garage 70WLED 2x56 Board UNIV 120-277 Driver 4000K

5000K*

*DLC Listed Config.

RCPL RAFL* CORDWx SS

TPS

WLOS USBD BDxx BDxxPC DHPC PCxxx

Ribbed Clear Polycarbonate Lens Ribbed Acrylic Frosted LensWet Location Strain Relief Cord (X = ft)

Stainless Steel Latches

Tamper Proof Screws

Wet Location Sensor InstalledUser Select Bi-level Dim w/ Occ. Sensor Preset Bi-level Dim Sensor (xx=% eg. 20,30)

Preset Bi-level Dim Sensor w/ PhotocellDaylight Harvesting

SD347 347V Stepdown Transformer

DIM Dimming Leads Installed

*To Ensure Lead Wires Are Attached, “DIM” Call Out Is RequiredWhen Building Part Number

• 0-10V Dimming Driver*• Continuous Poured, Closed Cell Polyurethane Gasket• Stainless Steel Mounting Brackets for Drill Free Mounting• Polycarbonate Latches* (Std), Stainless Steel (SS) Optional• Tamper Proof Screws (TPS) Optional• 5 Year Warranty• Fiberglass Body Attributes

- IP65, IP66 & IP67 (Dust Tight, Low Pressure W ater Jets,High Pressure Water Jets, and Immerse 1M)

- NEMA4, NSF Rated & 5VA Flame Rating- UL Listed / Wet Locations, (F1) Rated for Outdoor Use

www.ilp-inc.com Industrial Lighting Products 407-478-3759

MOUNTING OPTIONS

WTPG4-70-WLED-UNIV-RAFL

SUMMARY DATA

PLANE AND CONE DIAGRAM

Photometric values based upon tests performed in compliance with LM-79. IES files can be downloaded at www.ilp-inc.com

LUMINAIRE OUTPUT = 6797 LMS120.0V 0.6187A 73.63W PF=0.992

HEMISPHERES TESTED: BOTHEFFICIENCY (Total): 100.0 %EFFICIENCY (Downlight): 85.6 %EFFICIENCY (Uplight): 14.4 %CIE CLASSIFICATION: SEMI-DIRECTSPACING CRITERION (0-Deg.): 1.29SPACING CRITERION (90-Deg.): 1.95

563.5086 :PMAL/SNEMUL LUMINOUS OPENING: RECTANGULAR

)teeF( 05.0 :htdiWLength: 4.25

90.0 :thgieH 6.37 :STTAW TUPNI

10 20 30 40

50

60

70

80

90

100 110 120 130 140 150 160 170

200

200

400

600

800

1000

1200

Quadralaterally Symmetric Solid: 0 Degrees Small Dash: 45 Degrees Large Dash: 90 Degrees

4FT AMAZON PG - 70W LEDWET LOCATION

Lineal Ribbed Diffuser 4’ and 8’ Lengths

Frosted Lens 4’ and 8’ Lengths

Nominal Length Width Length Depth

Lineal Ribbed Diffuser

Wide (2 Light)

4’ 6.40” 51.37” 4.25”

8’ 6.40” 99.50” 4.25”

Frosted Lens

4’ 6.40” 51.37” 5.63”

8’ 6.40” 99.50” 5.63”

Drill-Free Stainless Steel Mounting Brackets

• SS Mounting Brackets for drill-free surface mounting (2 brackets standard)

• Fixture Mounting Box (FMB) - Includes rigid box to attach to the fixture, provides for single point mounting to accept a pendant, hook, or conduit hub (sold separately).

FMB HUB 3/4 CONDUIT

HOOK