products consumables
TRANSCRIPT
LAMANNA Luigi FrancoDECEMBER, 2015
RESINS FOR TUNNELLING RESINS FOR MINING
- WATER SEALING - GAS AND WATER SEALING
- ROCK CONSOLIDATION - BOLTING
- CAVITY FILLING - CAVITY FILLING
- CONSOLIDATION OF MECHANIZED EXAVATION - GROUND AND ROCK CONSOLIDATION
- GROUND CONSOLIDATION - GAS AND WATER SEALING
- SEALING AND STRUCTURAL BONDING OF FISSURES
AND CRACKS
- ROCK INJECTION
SOIL CONDITIONERS (FOAMS & POLYMERS, ANTI-CLAY-AGENTS)
MAIN BEARING SEALING
TAIL SEALANTS
LIQUID APPLIED PURE POLYUREA MEMBRANE (WATERPROOFING)
THE NAME PRODUCTS, DESCRIPTION AND CHARACTERISTICS:
“GLOBALFOAM-SP (Fire resistant)”
CAVITY FILLING - silicon-mineral-organic formula with a high expansion capacity studied for
waterproofing and consolidating friable rocks and earth, filling cracks and cavities, ducting water in water
table areas. Non-toxic and self extinguishing, no production of harmful fumes.FIRE RESISTANT.
“GLOBALFOAM-WR” and “GLOBALFOAM-WR-NF (Fire resistant)”
WATER SEALING - polyurethane resin extremely reactive on contact with water, suitable for sealing
cracks, joints, empty spaces, as well as consolidating crushed rock or concrete areas, provided that
there is humidity
“GLOBALFOAM-PU” and “GLOBALFOAM-PU-NF (Fire resistant)”
WATER SEALING - polyurethane resin, self-estinguishing,, suited for sealing of cracks, joints, cavity
filling, and for consolidation of crusche manufacture made of stone or cement, in presence of dampness.
In contact with water starts a chimica reaction that forms a closed-cells consolidating foam, which is
waterproof and has a good chimica stability. FIRE RESISTANT
“GLOBALSTONE-M” and “GLOBALSONE-LV50 (Fire resistant)”
SEALING AND STRUCTURAL BONDING OF FISSURES AND CRACKS (FLEX) - STRATA
CONSOLIDATION – Organic-mineral two components resin, not expansible, characterized by low
viscosity, excellent chimica stability, mechanical resi stance and flexibility. Ideal for water-proofing
fractured rock, consolidation of loose land and rock, crack and cavity filling. Especially suitable for
bonding injection drill bolts because the resins cure within just a few minutes and the bolt can be loaded
in a very short time. FIRE RESISTANT.
“GLOBALFOAM” SERIES
THE FOAM PRODUCED WITH “GLOBALFOAM-SERIES ” IS NEITHER
TOXIC NOR POLLUTANT FOR THE ENVIRONMENT
G
L
O
B
A
L
F
O
A
M
-
W
R
G
L
O
B
A
L
F
O
A
M
-
S
P
POLYMER RESINS FOR TUNNELLING (AND MINING)
G
L
O
B
A
L
S
T
O
N
E
TECHNICAL DATA:
Mixing ratio (A + B) : 100: 100 parts in weight (1: 1 in volume).
Compressive strength: 55,9 Mpa at 24 h at 20 ° C and 60% R.H.
Flexure strenght: 20,7 Mpa at 24 h at 20 ° C and 60% R.H.
Tensile strenght: 14,2 Mpa at 24 h at 20 ° C and 60% R.H.
TECHNICAL DATA:
Mixing ratio (A + B) : 100: 83 parts in weight (1: 1 in volume).
Compressive strength: 51,97 Mpa at 24 h at 20 ° C and 60% R.H.
Flexure strenght: 26,50 Mpa at 24 h at 20 ° C and 60% R.H.
KEY FEATURES OF THE "FORMULATION" ARE:
Durability of “GLOBALSTONE” exceeding 500 years (we believe that can exceed 1,000- 2000 years without
being subject to any degradation): ability to resist weathering action, chemical attack, abrasion, or any
process of deterioration.
All photos illustred are copied from the WEB
- CASE STUDIES N° 01 -
INJECTION OF “GLOBALSTONE-LV50” ORGANO - MINERAL FOAM FOR WATERPROOFING
AND STRATA CONSOLIDATION:
- the product has greater penetration into cracks (0.005 inches);
- the product block water inflows.
THE GLOBALSTONE-LV50
BLOCK WATER INFLOWS
THE GLOBALSTONE-LV50
BLOCK WATER INFLOWS
WATER
WATER
WATER
All photos illustred are copied from the WEB
- CASE STUDIES N° 02 -
INJECTION OF THE SILICATE RESINS TO BLOCK THE INFILTRATION OF WATER IN A GALLERY OF SERVICES:
1st step): - injection of “GLOBAFOAM-WR”;
2nd step): - injection of “GLOBALFOAM-PU-NF”.
INJECTION “GLOBALFOAM-WR”
INJECTION “GLOBALFOAM-PU-NF”
SOME APPROACHES FOR STOPPING
WATER INGRESS INTO TUNNELS:
1) – “GLOBALFOAM-WR”;
2) – “GLOBALFOAM-PU-NF”
WATER
All photos illustred are copied from the WEB
EA
RT
H
PR
ES
SU
RE
BA
LA
NC
ED
RE
CTA
NG
UL
AR
SH
IEL
D M
AC
HIN
E
All photos illustred are copied from the WEB
- CASE STUDIES N° 03 -
PRECAST SEGMENTSTUNNEL FISSURES WATER
SEALING
PACKERS
PACKERS
FISSURES
INJECTION
“GLOBALFOAM-WR” AND “
GLOBALSTONE-LV50
PRECAST SEGMENTS
“GLOBALFOAM-WR”
SLOW REACTING INJECTION
RESIN WITH LONG POT LIFE
ACCELERATED CURING AS
SOON AS IN CONTACT WITH
WATER
- CASE STUDIES N° 04 -
TBM
WATER BEARING ZONE
INJ ECTION “GLOBALFOAM-WR” RESIN
FOAMS UPON CONTACT WITH WATER
(One component water sealing injection
resin for cracks and fissures in rock)
INJ ECTION “GLOBALFOAM-WR” RESIN
FOAMS UPON CONTACT WITH WATER
(One component water sealing injection
resin for cracks and fissures in rock)
INJ ECTION “GLOBALFOAM-SP” RESIN
PROBE DRILLHOLE
When the most important problem is water the basic principle of pre-ground treatment is to utilized the ground surrounnding the
tunnel as a load bearing ring and make it an integral part of the primary support and lining.
This conceprt can be reached by creating a tight ground ring around the lining so that the hydrostatic pressure inthe outer permeable
ground would act on the grouted ring instead of on the lining.
All photos illustred are copied from the WEB
- CASE STUDIES N° 05 -
PROJECT IN CHINA
“GLOBALFOAM-WR”
SLOW REACTING INJECTION RESIN WITH
LONG POT LIFE ACCELERATED CURING AS
SOON AS IN CONTACT WITH WATER
TUNNEL
PRESENCE OF WATER
WITH A FAULT ZONE
All photos illustred are copied from the WEB
- CASE STUDIES N° 06 -
EXAMPLES OF
INSTABILITY PROBLEMS
AT THE TUNNEL FACE
Injected “GLOBALFOAM-SP” resin
FAULT ZONES
All photos illustred are copied from the WEB
All photos illustred are copied from the WEB
- CASE STUDIES N° 07 -
“GLOBALFOAM-PU-NF” AND “GLOBALFOAM-SP” INJECTION
THE PNEUMATIC DRIVEN SINGLE PLUNGER PUMP
FOR TUNNEL AND MINING
All photos illustred are copied from the WEB
- CASE STUDIES N° 08 -
WATER SEALING AT DAM
The resins “GLOBALFOAM-WR” or
“GLOBALSTONE-LV” were injected,
dependent on water ingress pressure and
volume in a given location
All photos illustred are copied from the WEB
- CASE STUDIES N° 09 -
“GLOBALFOAM-PU-NF” AND “GLOBALFOAM-SP” INJECTION
All
ph
oto
sillu
str
ed
are
co
pie
dfr
om
th
e W
EB
TH
E P
NE
UM
AT
IC D
RIV
EN
S
ING
LE
PL
UN
GE
R P
UM
P
FO
R T
UN
NE
L
AN
D M
ININ
G
- CASE STUDIES N° 10 -
“GLOBALSTONE-LV50 ” AND
“GLOBALFOAM-PU-NF INJECTION
PACKERS
- CASE STUDIES N° 11 -
“GLOBALSTONE-LV50” INJECTION
PHASE 01 PHASE 02
“GLOBALFOAM-PU-NF” AND “GLOBALFOAM-SP” INJECTION
WATER
STABILIZATION (RIGID) OF SUBSTRATE
- CASE STUDIES N° 12 -
PROTECTIVE PAINT AND WATERPROOFING (GLOBALCOAT-HR-90)
INJECTION “GLOBALSTONE-LV50”
WATER / OIL TANK
ANCHORED REACTION BLOCK WALLS CONSIST OF
DISCRETE, ANCHORED CONCRETE BLOCKS PLACED
IN A PATTERN ON A SLOPE TO INCREASE THE
SLOPE STABILITY.
TYPICAL REPAIR SCHEME
GLOBALCOAT-HR-90 (EXTERNAL)
- CASE STUDIES N° 13 -
RENFORCEMENT STRUCTUREL DES STRUCTURES NOUVEAU / EXISTANTES
INJECTION “GLOBALSTONE-LV50”
- Pile foundation - Anchorage of avalanche protection structureìs and
- Buoyancy control nois barrieers
- Slope and embankment stabilization - Injection works
- Reinforcement of excavation pits and retaining walls - Foundation of pylons and wind mills
All photos illustred are copied from the WEB
- CASE STUDIES N° 14 -
WATER
INJECTION OF “GLOBALFOAM-PU-NF”
ORDER TO AVOID THAT THE WATER
ENTERS THE HOLE OF OIL XTRACTION
GAS
OIL
FAULTS
OIL DERRICK
SECTION
PLAN VIEW
WATER
WATER
INJECTION OF
GLOBALFOAM-PU-NF
ORDER TO AVOID
THAT THE WATER
ENTERS THE HOLE
OF OIL EXTRACTION
INJECTION OF
GLOBALFOAM-PU-NF
ORDER TO AVOID
THAT THE WATER
ENTERS THE HOLE
OF OIL EXTRACTION
HOLE DRILLING
FOR OIL
GLOBALCHIMICA SRL is an Italian limited liability company, etablished in 1949 and
situated in Lombardore, in the North of Italy, at 20 Km from Turin and 180 Km from
Genoa, one of the bigger port of Italy. Manufacturer of chemical products for the
building, mould making and mining/tunnelling sector, Globlachimica’s factory size is of
4.500 covered square meters on a total surface of 9.700 m2.
LA
MA
NN
A L
UIG
I F
RA
NC
OTe
ch
nic
alS
ale
sM
an
ag
er
of
GL
OB
AL
CH
IMIC
A D
PT
Tu
nn
el a
nd
Min
ing
GLOBALCHIMICA SRL has consolidated experience on the mains markets, exporting since
1980 in Eastern Europe, North and South America, Mid East and Southeast Asia, with an export
percentage of 60 - 70 % on the total annual sales.
Internal structure of the Company is essencial but efficent. With 10 specialized employees on
the production line, team of R&D, Commercial - Export department, and Administration.
RESEARCH AND DEVELOPMENT (R&D) : GLOBALCHIMICA SRL has a modern research
and development laboratory, for controlling raw materials and finished products. This allows, to
carry out elaborate organic syntheses independently in the preparation of special raw materials
and complex formulae.
QUALITY CONTROL: Company’s main purpose is customer satisfaction. To realize this aim,
helped from equipments endowed with very high technology, products are subjected to a
process to verify that all the mains features are satisfied (Density, Viscosity, Consistency,
Dynamometer tests, FTIR and other spectral controls, Chemical analysis, etc.).
TECHNICAL COMMERCIAL DEPARTMENT: E.P.C. CONSULTING SRL (Exclusive world) –
Manager: Lamanna Luigi Franco Beside internal commercial-export department, profitable is a
cooperation for Tunnelling and Mining sector with engineers and commercial assistants located
in ROME (ITALY).
CERTIFICATION : since the end of 2007, GLOBALCHIMICA SRL is working to develop ISO
9001 certification, obtained at the beginning of 2010.
Company is shared in 4 divisions :
•Tunneling and mining : Resins for stabilising ground/rock before and after conventional
digging or with TBM through injections.
•Building : GLOBALCHIMICA SRL produces a comprehensive range of paints, protective
coatings and special formulae for building and various purposes, including waterproofing road
planking, terrace roofs, car parks, tanks, aqueducts, protective coating of bridges, viaducts,
facings, forced ducts, corrosion-proofing of chemical and industrial plants; low, medium and
high thickness coating of industrial and domestic floors, structural consolidation of major
construction works (tunnels, bridges, viaducts, railways), monumental and civil restoration.
•Mould making : Production and marketing of Room Temperature Vulcanizing RTV2 silicone
rubbers and polyurethane rubbers for moulds and matrices. Epoxy formulae for moulds and
matrices.
•Defense : Production of special paints suited for protection and camouflage of military
equipments.
Mr. LAMANNA Luigi Franco
INDEPENDENT CONSULTANT TUNNELING , MINING AND OIL
SPECIALIZED IN MECHANIZED TUNNELING WITH HARD ROCK
TBM AND SOFT SOIL EPB SHIELDS
EXPERT AND CONSULTANT IN STRUCTURAL REINFORCEMENT
LAMANNA Luigi Franco, performs for 40 years professional consulting and technical
direction in the various sectors of civil, industrial, military, hydraulics, railway,
highway and recent years in the sector of “tunneling” and “mining” on the correct
use of special “resin” and related technologies for consolidation, repair and
maintenance of masonry, concrete, iron and wood.
Is the author of numerous scientific publications and is always engaged in the study
and development of “innovative materials” and related techniques and technologies
used.
- MAINTENANCE OF AIRPORT PAVEMENTS, ROAD TRANSPORT AND CONDUCTIVE/DISSIPATIVEPAVEMENTS
- INJECTION RESINS SYSTEM IN TUNNELLING, MINING AND CIVIL ENGINEERING
- DAMS and BRIDGS - REPAIR, PROTECTION AND REINFORCEMENT OF STRUCTURAL
CONCRETE
- SOLUTIONS FOR PRE-EXCAVATION GROUTING IN ROCK TUNNELING AND MINING
LAMANNA LUIGI FRANCO
Independent Technical Consultant
All
ph
oto
sillu
str
ed
are
co
pie
dfr
om
th
e W
EB
Provide strong engineering solutions for our clients by
planning, designing and supervising construction of
infrastructure projects in the fields of energy, transportation,
resources, urban and public sector development.
- Hydropower - Tunnels
- Railways - Mining
- Roads - Bridgs
LA
MA
NN
A L
UIG
I F
RA
NC
O
Ind
ep
en
den
tT
ech
nic
al
Co
nsu
ltan
t
EXPOSURE OF OUR PRODUCTS IN INTERNATIONAL TRADE FAIRS
GLOBALCHIMICA srl
16-18, via del Boschetto
10040 LOMBARDORE (TORINO) – ITALY - U.E.
e-mail: info @ globalchimica.com
TECHNICAL AND COMMERCIAL DEPARTMENT:
DIVISIONS:
- TUNNELLING
- MINING
- OIL
- CIVIL ENGINEERING UNDERGROUND ENG.
- TBM-EPB (GREASE-SEALANTS, SOIL CONDITIONING FOAMS AND POLIMERS)
Mr. LAMANNA LUIGI FRANCO
132, via dei Serpenti – 00184 ROME – ITALY - U.E.
E-mail: lamannaluigifranco1 @ gmail.com epc.consulting.italia @ gmail.com
THE ITALIAN CHEMICAL INDUSTRY IN THE SERVICE OF SAFETY IN MINES AND TUNNELING
Luigi Franco, Mr. LAMANNA
132, via dei Serpenti – 00184 ROME, ITALY, U.E.
INDEPENDENT TECHNICAL CONSULTANT
Tunnelling Consultant Specialized in Mechanized Tunnelling with
Hard Rock TBM and Soft Soil EPB Shields
Expert and Consultant in structural reinforcement
E-mail: lamannaluigifranco1 @ gmail.com - epc.consulting.italia @ gmail.com
THE ITALIAN EXPERTS IN THE SERVICE OF SAFETY IN MINES AND TUNNELING