product positioning statement of line planning · 2020-06-15 · canopy® product positioning...
TRANSCRIPT
Canopy Kimball Benching
Page 2.1
➤See page
Product Positioning page 2.3
Statement of Line page 2.3
Planning page 2.8
Overview page 2.8
Dimensions 2.10
Benches 2.14
Trusses 2.18
Ends 2.20
Meeting Booths 2.24
Grommet Options page 2.26
Cut-Out Options page 2.27
Accessory Frame Options 2.28
Screens 2.29
Accessories 2.33
Cable Management 2.36
Pricing page 2.37
Benches 2.37
Ends 2.41
Meeting Booths 2.51
Tops and Bases 2.54
Screens 2.55
Cable Management and Accessories 2.66
Surface Materials page 2.76
Wood 2.76
Laminate 2.77
Paint and Vinyl 2.79
Fabric and Felt 2.80
Benching
CANOPY® HEIGHT ADJUST Table of ContentsPrice List Effective Dates: Pricing 03.02.20 Revisions 06.15.20
Specifications: Range of adjustment 281/2" to 43" (includes worksurface)
Lifting capacity 265 lbs. per bench side
Controller Up/down Programmable
Bench motor Two motors One control box
Noise level 39dBA
Volts 120v AC 24v DC
Amps (maximum) 6
Standby power .05 watts
Frequency and phase 60hz
Adjustability speed .5 per second
Duty cycle 10% (2 min. on; 18 min. off)
Anti-collision Yes
Overheat protection Yes
UL1286 listed Yes
Canopy Kimball Benching
Product PositioningCANOPY®
Height Adjust
Page 2.2
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy height adjust offering includes a bench with optional table ends, end media walls and screens to create a work environment with varying degrees of privacy with the unique canopy screens to divide the space.
IMPORTANT Canopy components are UL 1286 listed as furniture sys-tem. Electrical components attached to the bench are UL 962 listed.
Canopy Kimball Benching
Statement of LineBenches CANOPY®
Height Adjust
Page 2.3
IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Bench 1 • No power/data tray. ➤See page 2.15 for product info. ➤See page 2.37 to specify.
60"W 72"W
60"D • •
Bench 2 • With power/data tray for use with
Axil Z power/data center. ➤See page 2.16 for product info. ➤See page 2.38 to specify.
60"W 72"W
60"D • •
Bench 4 • With power/data tray for use with
Interlink iQ single-circuit power system.
➤See page 2.17 for product info. ➤See page 2.39 to specify.
60"W 72"W
60"D • •
Programmable Memory Control Switch ➤See page 2.14 for product info. ➤See page 2.40 to specify.
Ganging Connector ➤See page 2.14 for product info. ➤See page 2.40 to specify.
Wood Truss ➤See page 2.18 for product info. See page 2.40 to specify.
Canopy Kimball Benching
Statement of LineEnds CANOPY®
Height Adjust
Page 2.4
IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Table End with Rectangular Height-Adjustable Worksurface ➤See page 2.19 for product info. ➤See page 2.41 to specify.
59"W
28"D •
Table End with Half-Round Height-Adjustable Worksurface ➤See page 2.19 for product info. ➤See page 2.42 to specify.
59"W
29"D •
Fixed End Media Wall ➤See page 2.20 for product info. ➤See page 2.43 to specify.
59"W
29"D •
Fixed End Seat ➤See page 2.21 for product info. ➤See page 2.44 to specify.
59"W
29"D •
End Media Wall for Bench with Round Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.45 to specify.
59"W
59"D •
End Media Wall for Bench with Half-Ellipse Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.46 to specify.
59"W
61"D •
End Media Wall for Bench with Ellipse Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.47 to specify.
59"W
54"D •
Freestanding End Media Wall with Round Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.48 to specify.
59"W
59"D •
Freestanding End Media Wall with Half-Ellipse Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.49 to specify.
59"W
61"D •
Freestanding End Media Wall with Ellipse Height-Adjustable Worksurface ➤See page 2.22 for product info. ➤See page 2.50 to specify.
59"W
54"D •
Canopy Kimball Benching
Statement of LineMeeting Booth, Tops, and BasesCANOPY®
Height Adjust
Page 2.5
IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Meeting Booth ➤See page 2.24 for product info. ➤See page 2.51 to specify.
72"W
60"D •
Tops ➤See page 2.54 to specify.
24"W 42"W
42"H • •
Pneumatic Base ➤See page 2.54 to specify.
Canopy Kimball Benching
Statement of LineScreensCANOPY®
Height Adjust
Page 2.6
IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Worksurface Privacy Screens ➤See page 2.32 for product info. ➤See pages 2.61–2.63 to specify.
59"W 60"W 72"W
15"H • • •
Worksurface Privacy Screens with Accessory Rail ➤See page 2.32 for product info. ➤See page 2.64 to specify.
59"W 60"W 72"W
15"H • • •
Worksurface Privacy Screens with Bungee Cords ➤See page 2.32 for product info. ➤See page 2.65 to specify.
59"W 60"W 72"W
15"H • • •
Fixed-Height Center Screens ➤See page 2.30 for product info. ➤See pages 2.55–2.57 to specify.
60"W 72"W
22"H • • 36"H • •
Fixed Canopy Screens ➤See page 2.31 for product info. ➤See page 2.58 to specify.
30"W 60"W 72"W
43"H • • • 52"H •
Canopy Kimball Benching
Statement of LineAccessoriesCANOPY®
Height Adjust
Page 2.7
IMPORTANT: All dimensions shown below are nominal and have been rounded to the nearest inch. Refer the appropriate pricing pages for actual dimensions.
Accessories for Worksurface G34 Accessory Frame ➤See page 2.33 for product info. ➤See page 2.74 to specify.
Perforated Cable Tray ➤See page 2.36 for product info. ➤See page 2.66 to specify.
Accessories for Screen Accessory Rails ➤See page 2.33 for product info. ➤See page 2.75 to specify.
Monitor Arms ➤See pages 2.34–2.35 for product info. ➤See page 2.73 to specify.
Cable Management and Organizational Accessories ➤See page 2.36 for product info. ➤See page 2.66 to specify.
Perks Trackless Keyboard Arm ➤See the Perks chapter of the Kimball Desks Accessories Price List.
Interlink iQ Single-Circuit Power System Components • For use with Bench 4. ➤See page 2.68 to specify.
Axil Z Power Center • For use with bench 2 or freestand-
ing applications ➤See page 2.67 to specify.
Power and Data Components ➤See page 2.69 to specify.
Canopy Kimball Benching
PlanningOverviewCANOPY®
Height Adjust
Page 2.8
Bench Types:
Up/down switch (one per side) is standard; programmable switch is available separately.
Bench models include a sit-to-stand base and two worksurfaces. Benches support a maximum weight of 300 lbs. per worksurface. Specify the type of bench based on power/data needs. ➤See far right column for descriptions. Worksurfaces, which are part of the bench model, have square edges and are 3⁄4" thick. They are available in: • Thermally fused laminate (TFL) with
vinyl or ply rim • High-pressure laminate (HPL) with
vinyl, ply rim or plywood edge • Wood veneer with a wood rim • Plywood with exposed plywood
edge
Anti-collision function on control box (one per side) reduces damage to the desk and surrounding objects in the event of collision with a firm object. If an obstruction is detected, the table will stop and move in the opposite direction. The control box also has a built-in safety feature to shut down should the motor overheat and includes a 7' power cord.
Center-mount fixed screens can be specified for use on benches; screens are specified separately. Privacy worksurface screens and canopy screens are also available. Two screens are specified per bench. They can be the same or different.
Sit-to-stand base adjusts in height from 28"–421⁄2". Base is available in 501 platinum metallic at no upcharge. Each worksurface has its own lift columns and central control box for synchronization. Two-column leg compresses inside itself in lower positions. Illustration shows bench in its lowest position.
Bench 1 No power/data tray. ➤See page 2.15
Bench 2 Power/data tray for use with power/data center. ➤See page 2.16
Crossrails span between height- adjust legs and supports power/data trays.
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Bench 4 Power/data tray for use with Interlink iQ single-circuit power system. ➤See page 2.17
Canopy Kimball Benching
OverviewCANOPY®
Height Adjust
Page 2.9
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 continued
Ganging connector, specified sepa-rately, connect benches together. Ganging connector is screwed to the underside of the crossrails of both benches. Specify 28F29GCP when connecting two benches together.
1" gap minimum between side-by-side worksurfaces is required to minimize pinch/clearance hazards. Ganging connector is sized to provide the required 1" minimum clearance when worksurfaces are installed appropriately.
Different screen types are designed to align when used together bench to bench. Worksurface privacy screen brackets are designed to align with a center screen or canopy.
Height-adjustable table ends are available in rectangular and half-round shapes.
Benches can be used singly with one frame providing a two-person work-station or several benches can be connected to form a dual-sided run.
Canopy screens offer an optional level of privacy.
Optional wood truss adds a customized accent to base frames.
Worksurface grommets, cut-outs, and accessory frames are available factory installed.
Cable management accessories store and organize cables beneath the worksurface.
Canopy Kimball Benching
Planning
Dimensions
OverviewCANOPY®
Height Adjust
Page 2.10
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Travel Range: Benches have a 141⁄2" travel range from 28" to 421⁄2", which includes the worksurface thickness. Each worksur-face works independently of the adjoining or facing bench.
Bench Depth: Bench is available in one overall depth. Worksurfaces are positioned in one location to maintain the overall depth of 591⁄4" to align with end media and table end units.
28"minimum
141⁄2"adjustmentrange
421⁄2"maximum
281⁄4"281⁄4"
591⁄4"
23⁄4"
281⁄4"
A (inside)
591⁄4"23⁄4" (gap between worksurfaces without screens or Canopy)
281⁄4"
B (outside)
131⁄2"
113⁄4"(blade depth)
(worksurfaceoverhangs bladeon each side)
Distance between Legs:
Dimension A Dimension B Width of top (Inside) (Outside)
60" 271⁄4" 323⁄4"
72" 391⁄4" 4434"
Perks trackless keyboard kit (model 99K1806KAT) can be installed on the user side of worksurfaces with a suggested clearance of 93⁄8" from the front of edge of the worksurface. ➤See the Perks chapter of the Kimball Desks & Accessories Price List.
Canopy Kimball Benching
Planning
Dimensions, continued
OverviewCANOPY®
Height Adjust
Page 2.11
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Benches with no screens
Two 15"H worksurface privacy screens
Two 361⁄4"H fixed height center screens
Two 43"H canopy screens
361⁄4"H fixed height center screen and 15"H worksurface privacy screen
flushflush23⁄4"5⁄16" gap5⁄16" gap 5⁄16" gap5⁄16" gap 5⁄16" gapflush
IMPORTANT: For benches with screens, two screens must be speci-fied (one for each side of the bench). They can be the same or different. IMPORTANT: Even though a gap exists between the worksurface and center or canopy screens, cables cannot exit from the worksurface through the gap; specify a grommet or accessory frame.
15"H worksurface privacy screen and 43"H canopy screen
361⁄4"H fixed height center screen and 43"H canopy screen
5⁄16" gapflush5⁄16" gap5⁄16" gap
Gap Between Worksurfaces or Screens:
Canopy Kimball Benching
Planning
Dimensions, continued
OverviewCANOPY®
Height Adjust
Page 2.12
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Overall Height:
28"
133⁄8"
421⁄2"
133⁄8"
28"
441⁄2"
421⁄2"
28"
565⁄8"
421⁄2"
28"
633⁄8"
421⁄2"
Two 15"H worksurface privacy screens Two 221⁄8"H fixed-height center screens
Two 361⁄4"H fixed-height center screens Two 43"H canopy screens
Canopy Kimball Benching
Planning
Edge/Rim Profiles
OverviewCANOPY®
Height Adjust
Page 2.13
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Edge/rim profiles differ based on the top or screen material selected.
Softened Vinyl Rim (P) • Applies to TFL or HPL worksurfaces,
center screens, and worksurface privacy screens
• 2mm vinyl edge • Profile is on all four sides
Ply Rim (E) • Applies to TFL or HPL worksurfaces,
center screens, and worksurface privacy screens
• 1mm edge • Profile is on all four sides
Softened Wood Rim (F) • Applies to wood veneer worksurfaces • 2mm wood rim • Profile is on all four sides
Plywood Edge (D and D2) • Applies to HPL and plywood
worksurfaces, canopy screens, center screens, and worksurface privacy screens
• No rim; exposed plywood on all four sides
• Small voids may be visible in the edge, an inherent characteristic of plywood
Canopy Kimball Benching
PlanningBenchesCANOPY®
Height Adjust
Page 2.14
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Bench models include a base and two worksurfaces. There are four bench types based on no power or two different integrated power options. Adjustment range is 28"–421⁄2". Base is available in 501 platinum metallic at no upcharge. ➤See page 2.15 for bench 1. ➤See page 2.16 for bench 2. ➤See page 2.17 for bench 4. Worksurfaces, which are part of the bench model, have square edges and are 3⁄4" thick. They are available in: • Thermally fused laminate (TFL) with
vinyl or ply rim • High-pressure laminate (HPL) with
vinyl, ply rim or plywood edge • Wood veneer with a wood rim • Plywood with exposed plywood
edge
Grain direction runs with the width. Note: Rotary woodgrain patterns on plywood tops will vary from one top to another.
Worksurface edge/rim profiles differ based on the top material selected. ➤See page 2.13. Several flexible worksurface options are available for routing cords and cables and accessing power and data. As well, accessory frames can accommodate accessories for increased productivity. Factory-installed worksurface options include: • Worksurface grommets (G1 and
G19) • Worksurface cut-outs for
power/data centers (C4, C6, G20, G28 and C29)
• Accessory frames (G34) These options are available in prede-termined locations. Upcharges apply. ➤See page 2.26 for grommets. ➤See page 2.27 for cut-outs. ➤See page 2.28 for accessory frames.
Standard Programmable
Two up/down switch control boxes, one per side, ships standard with all benches. Program mable memory control switch with four settings and display can be specified separately to replace a standard module. Both the standard and the programmable switches can be mounted on the left or right side of the worksurface and are field installed. Glides are standard with a silver metal top and black plastic base. They are 21⁄4" diameter and 1⁄2"H. Stem is 5⁄8" and leveling range is 1⁄4". If more leveling is required, a break in the bench run may be necessary.
Connections
Ganging connector, model 28F29GCP, is specified separately to link benches together.
Planning Factors
When specifying storage, the maximum clearance under the height-adjustable bench frame to the floor is 241⁄4" with the leveling glide in the lowest position. Perks hanging CPU holder cannot be used with Canopy benches as it will interfere with the understructure. Canopy center and worksurface screens are specified in the same width as the bench. Clamp-on monitor arms and power units cannot be used with Canopy bench.
Related Products
Perks trackless keyboard arm, model 99K1806KAT, can be installed under the bench worksurface on user side. ➤See the Perks chapter of the Kimball Desks & Accessories Price List. Cable management accessories for benches and end units, including the cable trays, and baskets are available. ➤See page 2.36.
Canopy Kimball Benching
Planning
Bench 1
BenchesCANOPY®
Height Adjust
Page 2.15
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Two-column leg compresses inside itself in lower positions.
Bench 1 models provide a basic bench without an integrated power/data tray. Note: Base shown here without work-surfaces, which are standard with all bench models.
Holes in the mid-crossrail to attach two fixed center or canopy screens are standard on all bench models. Decorative crossrail covers are required if no screens are specified.
Blade supports and attaches the worksurface to the base.
Up/down switch (one per side) is standard; programmable switch is available separately.
Control box (one per side) is standard.
Canopy Kimball Benching
Planning
Bench 2
BenchesCANOPY®
Height Adjust
Page 2.16
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Up/down switch (one per side) is standard; programmable switch is available separately.
Two-column leg compresses inside itself in lower positions.
Bench 2 models provide an inte-grated power/data tray running through the center of the base with an opening to accept one Axil Z power/data center; specified sepa-rately. Note: Base shown here without work-surfaces, which are standard with all bench models.
Holes in the mid-crossrail to attach two fixed center or canopy screens are standard on all bench models. Decorative crossrail covers are required if no screens are specified.
Integrated power/data tray attaches to the bottom side of the crossrails.
Control box (one per side) is standard.
Blade supports and attaches the worksurface to the base.
Axil Z power/data center, specified separately, fits in cut-out provided in the power/data tray.
Blade supports and attaches the worksurface to the base.
Canopy Kimball Benching
Planning
Bench 4
BenchesCANOPY®
Height Adjust
Page 2.17
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Holes in the mid-crossrail to attach two fixed center or canopy screens are standard on all bench models. Decorative crossrail covers are required if no screens are specified.
Bench 4 models provide an inte-grated power/data tray running through the center of the base to accept an Interlink iQ single-circuit power system; specified separately. Note: Base shown here without work-surfaces, which are standard with all bench models.
Two-column leg compresses inside itself in lower positions.
Up/down switch (one per side) is standard; programmable switch is available separately.
Control box (one per side) is standard.
Integrated power/data tray pro-vides openings for power inserts.
Interlink iQ single-circuit power system, components specified sepa-rately, mounts to the underside of the power/data tray of Bench 4. The sys-tem consists of a power infeed which connects to the power harness with two Axil Z power/data centers. A maximum of four benches can be supported by one power in-feed. The power infeed features a sensor box that prevents overloading. ➤See page 2.68 Note: When specifying end units with Interlink iQ, one end unit will count as one bench.
Canopy Kimball Benching
PlanningTrussesCANOPY®
Height Adjust
Page 2.18
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Optional wood truss is available to add a customized accent to all bench, end media wall and fixed end compo-nents.
Trusses are constructed of solid beech and available in paints or wood finishes.
Trusses on Both Sides of Bench Frame Order a quantity of two per bench as shown.
Trusses on Every Other Frame or Specific Frames Order a quantity of four for the configuration shown.
Trusses on All Adjustable- or Fixed-Support Frames Order a quantity of seven for the configuration shown.
Canopy Kimball Benching
PlanningHeight-Adjustable Table EndsCANOPY®
Height Adjust
Page 2.19
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Height-adjustable table ends attach to either end of a bench to create an additional personal work-space or communal meeting area. Each model includes: • Sit-to-stand base • One worksurface • Frame to attach to bench. Adjustment range is 28"–421⁄2". Base is available in 501 platinum metallic at no upcharge. Worksurfaces have square edges and are available in the same materials as the bench: • Thermally fused laminate (TFL) with
vinyl or ply rim • High-pressure laminate (HPL) with
vinyl, ply rim or plywood edge • Wood veneer with a wood rim • Plywood with exposed plywood
edge Worksurface edge/rim profiles differ based on the top material selected. ➤See page 2.13.
Rectangular Half-Round
Two worksurface shapes are available: rectangle and half-round. Grain direction runs with width. Factory-installed grommets and cut-outs are available in pre- determined locations the same as the bench; upcharge applies. ➤See pages 2.26–2.27.
Standard Programmable
One up/down switch control box ships standard with each table end. Programmable memory control switch with four settings and display can be specified separately to replace a stan-dard module. Both the standard and the programmable switches can be mounted on the left or right side of the worksurface and are field installed.
Glides are standard with a silver metal top and black plastic base. They are 21⁄4" diameter and 1⁄2"H. Stem is 5⁄8" and leveling range is 1⁄4". If more leveling is required, a break in the bench run may be necessary. Power options for height-adjustable table ends are the same as offered on benches.
Table ends without power/data tray—models 28F3060BNERT1SE and 28F3060BNEHR1SE—provide a basic table end without an integrated power/data tray. The H-frame ships with the unit and replaces the bench crossrail to attach table end to bench. Frame is open to the floor.
Table ends with power/data tray for use with Axil Z power/data center—models 28F3060BNERT2SE and 28F3060BNEHR2SE—provide integrated power/data tray running through the center of the base with an opening to accept one Axil Z power data center; specified separately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach table end to the bench.
With power/data tray for use with for use with Interlink iQ single- circuit power system— models 28F3060BNERT4SE and 28F3060BNEHR4SE—provide an integrated power/data tray running through the center of the base with an opening to accept an interlink iQ single-circuit power system with two Axil Z per/data center; specified sepa-rately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach table end to the bench.
Related Products
Cable management accessories for benches and end units, including the cable trays and baskets, are available. ➤See page 2.36.
Canopy Kimball Benching
PlanningFixed End Media WallCANOPY®
Height Adjust
Page 2.20
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed end media wall attaches to the end of a bench and provides an impromptu meeting area. The inside curve can be specified with a writable laminate or can accommodate a mon-itor. The unit ships knock down and cannot be used as a freestanding unit.
Canopy screen ships with the unit and is 591⁄4"W x 52"H. Three quarter-inch thick exposed plywood edge is standard with a variety of material combinations in HPL, writable HPL and felt. Equipment shelf offers space to locate media equipment. It is 111⁄8"D and spans the width of canopy. Top surface is HPL with 3⁄4" thick exposed plywood edge. Shelf sits 191⁄2" above the floor. The equipment shelf cannot be used as a seat. Optional G19C center grommet in shelf (center back) is available to manage media cords to power source. See page 1.7 for finish options. Fixed frame has a 501 platinum metallic paint finish and accommo-dates the wood truss (specified sepa-rately).
Fixed end media wall without power/data tray—model 28F6070MWBEF1—provides a basic unit without an integrated power/data frame. The H-frame ships with the unit and replaces the bench end crossrail to attach the fixed end media wall to bench. Frame is open to the floor.
Fixed end media wall with power/data tray for use with Axil Z power/data center—model 28F6070MWBEF2—provides integrated power/data tray running through the center of the base with an opening to accept one Axil Z power data center; specified separately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach the fixed end media wall to the bench.
With power/data tray for use with for use with Interlink iQ single- circuit power system— model 28F6070MWBEF4—provides an integrated power/data tray running through the center of the base with an opening to accept an interlink iQ single-circuit power system with one Axil Z per/data center; specified sepa-rately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach the fixed end media wall to the bench.
Connections Flat-screen TV or monitor can be mounted to a Canopy screen. TV or monitor should not exceed 60" diago-nal in size or 40 lbs. maximum. A fixed TV mount should be used with wood screens not exceeding 5⁄8" projection. Tilt and full-mount TV mounts cannot be mounted on a canopy screen.
Canopy Kimball Benching
PlanningFixed End Seat for BenchCANOPY®
Height Adjust
Page 2.21
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed end seat for bench attaches to the end of a bench and provides seating to be paired with freestanding tables to create impromptu meeting areas. The unit ships knock and can-not be used as a freestanding unit.
Canopy screen ships with the unit and is 591⁄4"W x 52"H. Three quarter-inch thick exposed plywood edge is standard with a variety of material combinations in HPL, writable HPL and felt. Upholstered seat is 187⁄8" deep and spans the width of canopy. The cush-ion attaches to an HPL shelf with 3⁄4" thick exposed plywood edge. The cushion sets 207⁄8" above the floor. Fixed frame is 501 platinum and accommodates the wood truss (specified separately).
H-frame ships with the unit and replaces the end crossrail to attach to the bench. Power options are not available.
Canopy Kimball Benching
PlanningEnd Media Wall with Height-Adjustable WorksurfaceCANOPY®
Height Adjust
Page 2.22
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
End media walls with height-adjustable worksurface are avail-able as freestanding units and "for bench" models that much be attached to a bench for support. Model for bench attaches to either end of a bench to create a meeting area. These models cannot be used as a freestanding unit. Freestanding models feature an additional floor frame for stability in stand-alone applications. Units ship knocked down.
Height-adjustable worksurfaces features a sit-to-stand frame. Adjustment range is 28"–421⁄2".
Canopy can be used for privacy and to provide a mounting place for flat-screen TV or monitor. IMPORTANT: Canopy, model 28F6052CASE, is required and must be ordered separately. It attaches to the back of the equipment shelf frame. The overall height with the canopy screen installed is 697⁄8", which is taller than the bench with canopy.
Equipment shelf offers space to locate media equipment. It is 111⁄8"D and spans the width of canopy. Top surface is HPL with 3⁄4" thick exposed plywood edge. Shelf sits 191⁄2" above the floor. The equipment shelf cannot be used as a seat.
Fixed frame supports equipment shelf. Frame on end media walls for bench attaches to bench.
Glides are standard with a silver metal top and black plastic base. They are 21⁄4" diameter and 1⁄2"H. Stem is 5⁄8" and leveling range is 1⁄4". If more leveling is required, a break in the bench run may be necessary.
Floor frame on freestanding models includes cross members (shown as dashed lines) for increased stability.
Canopy Kimball Benching
Planning
continued
End Media Wall with Height-Adjustable WorksurfaceCANOPY®
Height Adjust
Page 2.23
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
For bench attachment
Freestanding Each model includes: • Sit-to-stand base • One worksurface • Fixed frame with equipment shelf IMPORTANT: Canopy, model 28F6052CASE, is required and must be ordered separately. It attaches to the back of the equipment shelf frame. The overall height with the canopy screen installed is 697⁄8", which is taller than the bench with canopy. Frame is available in 501 platinum metallic at no upcharge.
Worksurfaces have square edges and are available in the same materials as the bench: • Thermally fused laminate (TFL) with
vinyl or ply rim • High-pressure laminate (HPL) with
vinyl, ply rim or plywood edge • Wood veneer with a wood rim • Plywood with exposed plywood edge Worksurface edge/rim profiles differ based on the top material selected. ➤See page 2.13.
Round
Half-Ellipse
Ellipse
Three worksurface shapes are available: round (473⁄8" diameter), half-ellipse (59"W x 445⁄8"D), and ellipse (59"W x 373⁄4"D). Grain direction runs with width.
Standard Programmable
One up/down switch control box ships standard with each table end. Programmable memory control switch with four settings and display can be specified separately to replace a stan-dard module. Both the standard and the programmable switches can be mounted on the left or right side of the worksurface and are field installed. Factory-installed grommets and cut-outs in worksurface are available in pre-determined locations the same as the bench; upcharge applies. ➤See pages 2.26–2.27 Optional G19C center grommet in equipment shelf (center back) is available to manage media cords to power source. ➤See page 2.26 for finish options.
End media wall with height-adjustable worksurface without power/data tray—models 28F6070MWRD1SE, 28F6070MWHE1SE, and 28F6070MWEL1SE—provides a
basic unit without an integrated power/data frame. The H-frame that attaches the height-adjustable table to the fixed frame with equipment shelf is open to the floor.
Fixed end media wall with power/data tray for use with Axil Z power/data center—models 28F6070MWRD2SE, 28F6070MWHE2SE, and 28F6070MWEL2SE—provides integrated power/data tray running through the center of the base with an opening to accept one Axil Z power data center; specified separately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach the end media wall to the bench.
With power/data tray for use with for use with Interlink iQ single- circuit power system— models 28F6070MWRD4SE,
28F6070MWHE4SE, and 28F6070MWEL4SE—provides an integrated power/data tray running through the center of the base with an opening to accept an interlink iQ single-circuit power system with two Axil Z per/data center; specified sepa-rately. The power data tray is attached to the H-frame, which replaces the bench end crossrail to attach the fixed end media wall to the bench.
Connections Ganging connector, model 28F22GCP, is specified separately to link end media wall to a bench. Flat-screen TV or monitor can be mounted to a Canopy screen. TV or monitor should not exceed 60" diago-nal in size or 40 lbs. maximum. A fixed TV mount should be used with wood screens not exceeding 5⁄8" projection. Tilt and full-motion TV mounts cannot be mounted on a canopy screen. End media wall cable manager, model 28A0326CM, is available to mount to canopy below TV to route cables from TV to optional equipment shelf grommet.
Related Products
Cable management accessories for benches and end units, including cable trays and baskets, are available. ➤See page 2.36. Wood truss can be used on fixed frame. ➤See page 2.18.
Canopy Kimball Benching
PlanningMeeting BoothCANOPY®
Height Adjust
Page 2.24
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Two canopy screens, model 28F3043CAS, attach to the back of each seat frame; specified separately.
Meeting booth is a two-sided unit that attaches to either end of a bench. One side features a sit-down meeting area; the opposite side provides an height-adjustable worksurface
Fixed frame worksurface is 271⁄2" diameter. No grommet or cut-out options are available.
Height-adjustable worksurface is 281⁄4"D x 72"W.
Canopy screen, model 28F7243CAS, mounts at the center of the base frame with included attachment brackets
Three canopies are required to complete the meeting booth. The overall height with canopies installed is 633⁄8".
Two upholstered seats are stan-dard with the meeting booth unit. They are installed onto an HPL platform with exposed plywood edges.
Frame consists of a fixed side sup-porting the round top and seats and an height-adjustable frame on the opposite side.
Canopy Kimball Benching
Planning
continued
Meeting BoothCANOPY®
Height Adjust
Page 2.25
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Meeting booth frame consists of a fixed side supporting the round top and seats, and an adjustable height frame on the opposite side. The unit ships knocked down, and cannot be used as a freestanding unit.
Each model includes: • Sit-to-stand base • Fixed base • One height-adjustable worksurface • One round fixed worksurface • Two seat platforms • Two seat cushions IMPORTANT: Three canopies are required to complete the meeting booth; each are specified separately,
Frame is available in 501 platinum metallic at no upcharge.
Adjustment range on height-adjustable worksurface is 28"–421⁄2". Base is available in 501 platinum metallic at no upcharge. Worksurfaces have square edges and are available in the same materials as the bench: • Thermally fused laminate (TFL) with
vinyl or ply rim • High-pressure laminate (HPL) with
vinyl, ply rim or plywood edge • Wood veneer with a wood rim • Plywood with exposed plywood
edge Note: Finish for the round and rectan-gular worksurfaces will be the same. Worksurface edge/rim profiles differ based on the top material selected. ➤See page 2.13. Grain direction on worksurfaces runs with the width.
Factory-installed grommets and cut-outs in height-adjustable worksurface are available in pre- determined locations; upcharge applies. ➤See pages 2.26–2.27.
Standard Programmable
One up/down switch control box ships standard with each table end. Programmable memory control switch with four settings and display can be specified separately to replace a stan-dard module. Both the standard and the programmable switches can be mounted on the left or right side of the worksurface and are field installed. Power options for meeting booth are the same as offered on benches.
Meeting booth without power/data tray—model 28F7263MB1SE—provides a frame without an integrated power/data frame. Frame is open to the floor.
Meeting booth with power/data tray for use with Axil Z power/data center—model 28F7263MB2SE—provides integrated power/data tray running through the center of the base with an opening to accept one Axil Z power data center; specified separately.
Meeting booth with power/data tray for use with for use with Interlink iQ single-circuit power system—model 28F7263MB4SE—provides an integrated power/data tray running through the center of the base with an opening to accept an interlink iQ single-circuit power system with two Axil Z per/data center; specified separately.
Glides are standard with a silver metal top and black plastic base. They are 21⁄4" diameter and 1⁄2"H. Stem is 5⁄8" and leveling range is 1⁄4". If more leveling is required, a break in the bench run may be necessary.
Connections Ganging connector, model 28F29GCP, is specified separately to link meeting booth to bench.
Related Products
Cable management accessories for benches and end units, including cable trays and baskets, are available. ➤See page 2.36. Wood truss ➤See page 2.18.
Available Finishes
G1 Grommets: MB Matte Black SL Silver G19 Grommets: 405 Designer White 487 Brushed Nickel 490 Chrome 501 Platinum Metallic 514 Carbon Metallic 544 Silver Pearl
How to Specify 1 Insert the location and finish des-
ignator into model number sequence as indicated on the pricing page.
Note: Specify grommet location and finish together in one step with-out a space between the location and the finish designators. For example: G1CMB = G1 grommet, center, matte black G19C501 = G19 center, right, platinum metallic IMPORTANT: Only the grommet locations shown in the matrix at left are available as standard.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Worksurface Grommet OptionsCANOPY®
Height Adjust
Page 2.26
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Center Designator Upcharge
G1 Plastic Grommets
Rectangular Worksurfaces on Bench* G1C +$186
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G1C +$93
G19 Metal Grommets
Rectangular Worksurfaces on Bench* G19C +$186
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G19C +$93 *When you specify a grommet option on a bench, you will receive the two of same grommet(s), one on each side of the bench.
Rectangular
41⁄8"Center
Note: All dimensions for grommets are measured from the center of the grommet to the worksurface edge.
Half-Round
41⁄8"Center
Half-Ellipse
41⁄8"Center
Ellipse
63⁄4"Center
Round
91⁄2"
Center
G1 plastic grommet is a two-piece unit with snap-in lid. Lid cut-out slides open to route cables or can be closed when not in use.
G19 metal grommet is a two-piece unit with black brush access. Top locks in place.
23⁄4"
7⁄8" 21⁄4"dia. 7⁄8"23⁄8"
dia.
25⁄8"
How to Specify 1 Insert the location designator into
model number sequence as indicated on the pricing page.
IMPORTANT: Only the cut-out locations shown in the matrix at left are available as standard.
Center Designator Upcharge
C4 Cut-Out
Rectangular Worksurfaces on Bench* C4C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C4C +$83
C6 Cut-Out
Rectangular Worksurfaces on Bench* C6C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C6C +$83
G20 Cut-Out
Rectangular Worksurfaces on Bench* G20C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G20C +$83
G28 Cut-Out
Rectangular Worksurfaces on Bench* G28C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G28C +$83
C29 Cut-Out
Rectangular Worksurfaces on Bench* C29C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C29C +$83 *When you specify a cut-out option on a bench, you will receive the two of same cut-out, one on each side of the bench.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Worksurface Cut-Out OptionsCANOPY®
Height Adjust
Page 2.27
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Rectangular
23⁄4"Center
Note: All dimensions for cut-outs are measured from the back edge of the cut-out to the worksurface edge.
Half-Round
23⁄4"Center
Half-Ellipse
23⁄4"Center
Ellipse
63⁄4"Center
Round
C4 91⁄2"C6 8"
Center
C4 cut-outs are for use with: • Mho® retractable power/data center
with 3 prong plug (KCEB2PDPSPC • Mho retractable power/data/USB
center with 3 prong plug (KCEB2PDUPSPC)
C6 cut-outs are for use with: • Node® power center (KCEBN20PP) • Node® power/USB center
(KCEBN11PU)
G20 cut-outs are designed for use with Ellora® power/data center (99KPDCAM).
G28 cut-outs are designed for use with Ellora® power/USB/data center (45APDCS).
C29 cut-outs are designed for use with Ashley Trio™ power/USB center (KCE0409ATSMWW).
Available Finishes
501 Platinum Metallic (no upcharge)
How to Specify
Note: Specify accessory frame loca-tion and finish together in one step without a space between the loca-tion and the finish designators. For example: G34C501 = G34, center, platinum metallic finish IMPORTANT: Only the accessory rail locations shown in the matrix at left are available as standard.
Center Designator Upcharge
G34 Accessory Frame
Rectangular Worksurfaces on Bench* G34C +$272
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G34C +$136 *When you specify an accessory frame option on a bench, you will receive the two of same accessory frames, one on each side of the bench.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Accessory Frame OptionsCANOPY®
Height Adjust
Page 2.28
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Rectangular
23⁄4"Center
Note: All dimensions for accessory railare measured from the back edge of the cut-out to the worksurface edge.
Half-Round
23⁄4"Center
Half-Ellipse
23⁄4"Center
Ellipse
81⁄8"Center
Round
91⁄2"
Center
Accessory frames accommodate worksurface accessories. Frame opening is 35"W; any combination of accessories can be used up to a maximum of seven 5"W units (10"W units count for two units; 15"W units count for three units). Accessories can be specified to fill the entire space or partially to allow cables to exit the worksurface. ➤See page 2.33 for product info. ➤See page 2.74 to specify.
Perforated cable tray is recom-mended to organize cables below the worksurface. ➤See page 2.33 for product info. ➤See page 2.66 to specify.
Canopy Kimball Benching
Planning
Overview
ScreensCANOPY®
Height Adjust
Page 2.29
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Benches are specified with two screens, one for each user. Screen type can be the same on both sides or different. Screens are specified in the same width (60" or 72") as the bench. Select from: • Fixed-height center screens • Fixed canopy screens • Worksurface privacy screens Height-adjustable table ends with rectangular or half-round worksurface are only available with a worksurface privacy screen. End worksurfaces are narrower to align the bench depth and require a 591⁄4"W screen.
End media wall with height-adjustable worksurface (round, half-eclipse, ellipse) are only available with one width (591⁄4") and height (52") canopy. When mounted to the frame, the overall height is 693⁄4" which is taller than the bench canopy. Note: Fixed-height center screens and worksurface privacy screens are not applicable to end media walls.
Meeting booth is only available with canopies. Available 30" and 72" widths. Height aligns with bench canopy. Note: Fixed-height privacy screens and center screens are not applicable to meeting booths.
Canopy offers a variety of screen types that can be used in combinations to provide varying degrees of privacy and functionality.
Canopy Kimball Benching
Planning
Fixed-Height Center Screens
ScreensCANOPY®
Height Adjust
Page 2.30
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed-height center screens are available to mount on a bench frame only. They should be specified in the same width (60" or 72") as the bench. Center screens mount to the bench frame cross rail with brackets that ship with the screen. They are non-handed. Two heights are available: 221⁄8" and 361⁄4". Heights including mounting brackets and overall height when mounted on a bench are shown below.
221⁄8"H 361⁄4"H Screen Screen
With mounting bracket 251⁄16"H 391⁄4"H
Overall when mounted on bench 441⁄2"H 565⁄8"H
Screens are 3⁄4" thick and rimmed on all four sides. Screen rims are offered in the same rim options as worksur-faces. Screens are available in: • Thermally fused laminate (TFL),
same on both sides; 2mm vinyl or 1mm ply edge band
• High-pressure laminate (HPL), same laminate on both sides; 2mm vinyl, 1mm ply edge band, or exposed plywood edge
• Writable HPL; same on both sides (or with a contrasting HPL on the outside); 2mm vinyl, 1mm ply edge band, or exposed plywood edge
• Non-tackable felt is available on one side of all screens
Edge/rim profiles differ based on the screen material selected. ➤See page 2.13. Vinyl rims can be specified in a contrasting color.
TFL and HPL woodgrain runs with width. TFL and HPL screens are standard with the same laminate on both sides.
Canopy Kimball Benching
Planning
Fixed Canopy Screens
ScreensCANOPY®
Height Adjust
Page 2.31
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed canopy screens are available for bench, meeting booth, and end media wall. Canopies are specific to each application. Canopy screens are 3⁄4" and are only available with the exposed plywood edge. Materials include: • High pressure laminate (HPL); same
laminate on both sides • Writable laminate; same on both
sides or with a contrasting HPL on the outside
• Non-tackable felt is available on the inside of curve
Canopies for a bench must be specified in the same width (60" and 72") as the bench. The height of bench canopy is shorter than the end canopy. Canopy mounts to the bench frame crossrail with brackets that ship with the canopy.
43"H Canopy
With mounting bracket 46"H
Overall when mounted on bench 633⁄8"H
HPL woodgrain on canopy screen for bench runs with width (horizontal) .
Canopy screen for end media wall with height-adjustable worksur-face comes in one width (591⁄4"W). The height of end canopies are taller than the bench canopy. The canopy mounts to the frame behind the equipment shelf. Attachment screws ship with the end media wall. Canopy is 52"H with an overall height of 693⁄4" whenmounted on end media wall with height-adjustable worksurface.
HPL woodgrain on canopy screen for end media wall runs with height (vertical) due to the material size constraints.
Canopy screen for meeting booth come in two widths (30" and 72"). The height of the canopy is the same over-all height (633⁄8"H) as the bench canopy.
The 72" wide canopy that mounts to the central meeting booth frame is the same 72" wide canopy used on the bench. Attachment brackets ship with the canopy.
Meeting booth seat canopy is 30" wide. A quantity of two is required. The canopy mounts to the frame behind the seat cushion. Attachment screws ship with the meeting booth frame. HPL woodgrain runs with width (horizontal) on canopies on meeting booth.
Canopy Kimball Benching
Planning
Worksurface Privacy Screens
ScreensCANOPY®
Height Adjust
Page 2.32
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Worksurface privacy screens attach to a bench worksurface and height-adjustable table end worksur-face. Screens are available in several styles, materials and rim options. Screens are 3⁄4" thick and rimmed on all four sides. Screens are available in: • Thermally fused laminate (TFL),
same on both sides; 2mm vinyl or 1mm ply edge band
• High-pressure laminate (HPL), same laminate on both sides; 2mm vinyl, 1mm ply edge band, or exposed plywood edge
• Writable HPL; same on both sides (or with a contrasting HPL on the outside); 2mm vinyl, 1mm ply edge band, or exposed plywood edge
• Non-tackable felt is available on the user side of TFL, HPL, and writable laminate
Edge/rim profiles differ based on the screen material selected. ➤See page 2.13.
Vinyl rims can be specified in a contrasting color.
TFL and HPL woodgrain runs with width (horizontal).
Mounting rail runs continuous width of screen and has a 501 Platinum Metallic finish.
Worksurface privacy screens are 15"H. When mounted on a worksur-face, the exposed screen above the worksurface is 133⁄8". Screen mounts flush to the back of worksurface. Screens are specified in the same width as the bench or table end.
Bench cross rail covers must be specified for each worksurface screen to cover holes in crossrail that are visi-ble when not using a center screen or canopy.
Worksurface privacy screens with accessory rail are for use with dedi-cated accessories, which be can be used in any combination along the rail. Accessory rail screens are avail-able in all material options with the exception of felt.
Accessory rail sits flush with the screen surface. The rail is 12" high and is narrower than the screen width approximately 43⁄8" on each side. 591⁄4" and 60" screen rail width is 511⁄4". 72" screen rail width is 631⁄4". Rail is painted 501 Platinum Metallic finish.
Six accessories are available in all paint colors to accent workspaces.
Worksurface privacy screens with bungee cords provide a versatile board to display photos and project inspiration ideas. Items tuck between webbing without the need of a pin or magnet. Bungee screens are available in all material options with the excep-tion of writable laminate and felt. The bungee cord is a white cord with black flecks. The eyelets that attach cords to the screen are silver. Cords are woven under and over each other to creat the web design.
Canopy Kimball Benching
PlanningWorksurface AccessoriesCANOPY®
Height Adjust
Page 2.33
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details Benches with a factory-installed G34C accessory frame will accommodate a variety of dedicated accessory options. ➤See page 2.34 for dual and single M/Flex monitor arms.
Accessory frame is an aluminum frame with opening 35"W x 21/2"D and only available in 501 Platinum Metallic. Any combination of acces-sories can be used up to a maximum of seven 5"W units (10"W units count for two units: 15"W units count for three units). Accessories can be spec-ified to fill the entire space or partially to allow cables to be routed to the underside of the surface in open areas.
Perforated cable tray is designed to be used specifically with the acces-sory frame to organize cables beneath the worksurface. It mounts directly beneath the accessory frame. Avail-able in all paint colors.
Six work tools are available to help organize desktop. Available in all paint colors to accent workspaces; marker holders is available in Designer White writable paint.
Mounting plate can be specified separately to install a Perks Salt KCE02SUSM or Pepper KCE02PPSM unit (sold separately) to bring desktop power to the worksurface. The open-ing is 13/4" in diameter can also be used alone for cords to exit to the underside of the worksurface. Available in all paint colors.
Perks trackless keyboard kit (model 99K1806KAT) can be installed on the user side of worksurfaces with a suggested clearance of 93⁄8" from the front of edge of the worksurface. ➤See the Perks chapter of the Kimball Desks & Accessories Price List.
Personal task light features an artic-ulating fixture head with single touch on/off button located next to the LED lens. Spring tension provides adjustable positioning of the arm. Light output is 350 lumens, color tem-perature of 3900K, with color render-ing index of 80. LED rated lifespan is greater than 20,000 hours. Power supply is 6-watt wall transformer with 4’11” black cord. UL Listed. Mounting plate available in all paint colors ships standard to mount light in accessory frame. Task light is not freestanding.
Canopy Kimball Benching
Planning
Single and Dual M/Flex Monitor Arms
Worksurface AccessoriesCANOPY®
Height Adjust
Page 2.34
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details Monitor arms are designed specifi-cally for installation into the G34 Accessory frame.
Single
Dual Single and dual M/Flex models feature a center post with two adjustable cable management clips at the base of pole. Monitor arms in this collection are the M2 dynamic arm assembly which features 4D adjustment. Each arm adjusts in and out, up and down, swiveling left and right, and tilting back and forward.
Monitors up to 20 lbs. can be accommodated: • Single monitor arm supports one
monitor 4-20 lbs. • Dual monitor supports two monitors
4-20 lbs. each. Each arm adjusts independently of the other for the greatest versatility.
100mm x 100mm VESA plates are standard. A 75mm x 75mm plate can be accommodated. The standard VESA plates are not compatible with Apple monitors. ➤Contact Apple Computer directly to purchase an appropriate VESA plate separately.
Connections
Monitor arms ship with mounting plate that fits into the G34 accessory frame and is additionally secured to the underside of the worksurface. The mounting plate is available in all paint colors. The G34 grommet option on the worksurface must be specified to use these monitor arms. See page for other Perks monitor arm options tor tops without the G34 accessory frame.
Planning Factors
When installing a monitor arm with a Bench canopy screen, the monitor arm will need to be used in the lowest position to assure that the screen does not conflict with the canopy arch when the table is in the highest position.
Canopy Kimball Benching
Planning
Perks® Monitor Arms
Worksurface AccessoriesCANOPY®
Height Adjust
Page 2.35
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Canopy will accommodate Perks grommet/bolt-through mount monitors arms. ➤See the Perks chapter in the Kimball Desks & Accessories Price List to specify.
Monitor arms in this collection feature 4D adjustment, adjusting in and out, up and down, swiveling left and right, and tilting back and forward.
Arm with integrated cable management reach is 20" on single models and 22" on dual cross-bar models. Height adjustment range is 12" on single models and 111⁄2" on dual crossbar models. Monitors up to 151⁄2 lbs. can be accommodated: • Single model supports one monitor
between 5–151⁄2 lbs. • Dual crossbar model supports two
monitors up to 121⁄2 lbs. each. Note: Dual-arm crossbar monitors must have two monitors attached at all times for balance.
100mm x 100mm VESA plates are standard. A 75mm x 75mm plate can be accommodated. The standard VESA plates are not compatible with Apple monitors. ➤Contact Apple Computer directly to purchase an appropriate VESA plate separately.
Connections
Grommet/bolt-through models can be used in holes up to 2.3" in diame-ter. They cannot be placed over a pedestal, modesty panel, or support panel. They can be used with 13⁄16" or 19⁄16" worksurfaces. Bolt-through application can utilize a hole as small as 1⁄2" in the surface. ➤Refer to assembly instructions at www.kimball.com. \
Planning Factors
IMPORTANT: Monitor mounts are specific to arm style and are not are interchangeable between single and dual monitor applications. For grommet/bolt through models, be careful to install so as not to inter-fere with the height-adjustable base frame, modesty panels, screen, or cut outs that are attached to the worksur-face.When installing a monitor arm with a Bench canopy screen, the monitor arm will need to be used in the lowest position to assure that the screen does not conflict with the canopy arch when the table is in the highest position. When installing a monitor arm with a Bench canopy screen, the monitor arm will need to be used in the lowest position to assure that the screen does not conflict with the canopy arch when the table is in the highest position. Clamp-mount monitor arms are not compatible wtih Canopy.
Single99KSMAM2GMS
Dual Crossbar99KSMACBM8GMS
Canopy Kimball Benching
PlanningCable ManagementCANOPY®
Height Adjust
Page 2.36
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy provides several cable management accessories that are designed for use on benches, table ends, all end media wall units and meeting booth. Cables must be routed to the under-side of the worksurface through a G1 or G19 grommet or G34 accessory frame for benches with screens. IMPORTANT: Cables cannot be routed between the worksurface and fixed-height privacy, center, or canopy screens. Even though a 5/16" gap will exist between a center or canopy screen and the worksurface; cables cannot pass between.
J-hooks are standard in all bench and end unit power/data trays and ganging connectors. They provide support for power in-feeds, and cables that run in the recessed center are connecting power between units. Quantity of J-hooks varies with the length of tray.
Plastic cable carrier guides cables from the worksurface to the power source, preventing kinks in the cables as the worksurface moves. The top screws to the underside of the work-surface and can lay in the power/data tray or be secured with provided high-strength magnets. The carrier features 1/2" x 1/2" openings on the inside to slip cords into each opening which accommodates one 1/4" cord and one data cable per side. Links in the carrier can be removed to adjust to the desired length. Carrier can also be installed using the magnets to the column leg below the tray on all bench frames to manage power cords from the power data/tray to a floor or wall outlet.
Perforated cable tray is designed to be used specifically with the G34C accessory frame to organize cables beneath the worksurface. Three openings in the bottom of the tray allow the plastic cable carrier (purchased separately) to organize cables to the power/data tray. Magnets supplied with the cable carrier secure to the inside of perforated cable tray.
Cable basket secures power and data cables neatly to the underside of a worksurface. It is available in two widths and is installed on either side of the table frame. It can be used with all grommets and cut-outs, including the G34C accessory frame.
Canopy Kimball Benching
Standard Includes
• Bench frame • Two worksurfaces • Two electric height-adjustable
mechanisms with control box • Two standard up/down control
switches • Two 6' power cords
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD), and wood (W) models only): STD = Group 1
STD2 = Group 2 (+20%) 6 Surface finish designator 7 Rim finish designator (omit for
wood (W) and plywood (D, LD2, MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
Without Power/Data Tray
Bench 1CANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Ganging connector, model 28F29GCP, may be specified to link bench to bench. ➤See page 2.40 to specify.
Page 2.37
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT1SE $7034 $7098 $7387 $7462 $8984
591⁄4" 72" 28"–421⁄2" 28F7260BNRT1SE 7237 7300 7574 7628 9471
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT1SE $7467 $7540 $9080 $8102 $10051
591⁄4" 72" 28"–421⁄2" 28F7260BNRT1SE 7643 7711 9574 8419 10602
Canopy Kimball Benching
Standard Includes
• Bench frame • Two worksurfaces • Two electric height-adjustable
mechanisms with control box • Two standard up/down control
switches • Two 6' power cords • Power/data tray
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD), and wood (W) models only): STD = Group 1
STD2 = Group 2 (+20%) 6 Surface finish designator 7 Rim finish designator (omit for
wood (W) and plywood (D, LD2, MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
With Power/Data Tray for Use with Axil Z Power/Data Center
Bench 2CANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.38
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT2SE $7663 $7727 $8016 $8090 $9610
591⁄4" 72" 28"–421⁄2" 28F7260BNRT2SE 7936 7999 8260 8326 10171
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT2SE $8096 $8169 $9707 $8729 $10677
591⁄4" 72" 28"–421⁄2" 28F7260BNRT2SE 8343 8409 10273 9119 11301
Ganging connector, model 28F29GCP, may be specified to link bench to bench. ➤See page 2.40 to specify.
Canopy Kimball Benching
Standard Includes
• Bench frame • Two worksurfaces • Two electric height-adjustable
mechanisms with control box • Two standard up/down control
switches • Two 6' power cords • Power/data tray
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD), and wood (W) models only): STD = Group 1
STD2 = Group 2 (+20%) 6 Surface finish designator 7 Rim finish designator (omit for
wood (W) and plywood (D, LD2, MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
With Power/Data Tray for Use with Interlink iQ Single-Circuit Power System
Bench 4CANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.39
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT4SE $7663 $7731 $8016 $8090 $9610
591⁄4" 72" 28"–421⁄2" 28F7260BNRT4SE 7936 7999 8260 8326 10171
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops 591⁄4" 60" 28"–421⁄2" 28F6060BNRT4SE $8096 $8169 $9707 $8729 $10677
591⁄4" 72" 28"–421⁄2" 28F7260BNRT4SE 8343 8409 10273 9119 11301
Ganging connector, model 28F29GCP, may be specified to link bench to bench. ➤See page 2.40 to specify.
Canopy Kimball Benching
Standard Includes
• Attachment hardware
How to Specify
Bench Crossrail Hole Covers ! Model 2 Paint designator 501 = Platinum metallic (no
upcharge) Programmable Control Switch ! Model Ganging Connector ! Model 2 Paint designator: 501 = Platinum metallic
(no upcharge) Wood Truss ! Model 2 Finish price group color (omit for
paint): STD = Group 1 3 Finish designator
Bench and End Media Wall AccessoriesCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.40
PricingCANOPY®
Height Adjust
D W H Model Price
Bench Crossrail Covers (set of 2) 28FBCCSP $313
Programmable Memory Control Switch (black) 11⁄2" 41⁄8" 3⁄4" 45FPROGS $122
Ganging Connector For End Media Wall with Height-Adjustable Worksurface
16" 221⁄2" 11⁄4" 28F22GCP $211
For Bench-to-Bench and Meeting-Booth-to-Bench Connections
16" 281⁄2" 11⁄4" 28F29GCP $287
Wood Truss Paint Finish
28F14WTP $315
Wood Finish
28F14WTW $315
IMPORTANT: Specify two program-mable memory control switches (45FPROGS) for each bench model; one for each worksurface.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Rectangular worksurface • Height-adjustable frame • Standard up/down control switch • H-frame to connect to bench
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Surface finish designator 7 Rim finish designator: 8 Paint designator 501 = Platinum metallic (no
upcharge)
Rectangular Height-Adjustable Worksurface
Table End for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.41
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT1SE $2845 $2881 $2979 $3016 $4590
With Power/Data Tray; For Use with Axil Z Power/Data Center
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT2SE $3215 $3249 $3349 $3384 $4959
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT4SE $3215 $3249 $3349 $3384 $4959
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT1SE $3019 $3053 $4742 $4146 $5122
With Power/Data Tray; For Use with Axil Z Power/Data Center
281⁄4" 591⁄4" 28"–421⁄2" 28F3060BNERT2SE $3387 $3423 $5112 $4517 $5491
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
281⁄4" 591⁄4" 28"–421⁄2" 28F3060BNERT4SE $3387 $3423 $5112 $4517 $5491
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Half-round worksurface • Height-adjustable frame • Standard up/down control switch • H-frame to connect to bench
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Surface finish designator 7 Rim finish designator: 8 Paint designator 501 = Platinum metallic (no
upcharge)
Half-Round Height-Adjustable Worksurface
Table End for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.42
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR1SE $3114 $3140 $3595 $3624 $5485
With Power/Data Tray; For Use with Axil Z Power/Data Center
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR2SE $3484 $3509 $3964 $3994 $5854
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR4SE $3484 $3509 $3865 $3994 $5854
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR1SE $3629 $3669 $5999 $4961 $6220
With Power/Data Tray; For Use with Axil Z Power/Data Center
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR2SE $3999 $4038 $6367 $5330 $6589
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR4SE $3999 $4038 $6367 $5330 $6589
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes • Canopy • Equipment shelf • Fixed frame with H-frame to attach
to the bench end • Hardware
How to Specify ! Model @ Canopy material: LD2 = HPL on both sides FLD2 = Felt on inside curve,
HPL outside MD2 = Writable laminate on
both sides FMD2 = Felt on inside curve,
writable laminate on outside curve
MLD2 = Writable laminate on inside curve, HPL on outside curve
3 Felt color designator, if applicable
4 HPL or writable laminate finish designator
5 Center grommet for equipment shelf:
G19C = Center grommet (+$93) X = No grommet 6 Equipment shelf HPL finish
designator 7 Paint designator: 501 = Platinum metallic (no
upcharge)
HPL, Felt, and Writable Laminate
Fixed End Media Wall for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.43
HPL/ Felt/ Writable Felt/ Writable/ HPL HPL Laminate Writable HPL D W H Model (LD2) (FLD2) (MD2) (FMD2) (MLD2)
Without Power/Data Tray 15" 591⁄4" 697⁄8" 28F6070MWBEF1 $8213 $9508 $8722 $9814 $8435
With Power/Data Tray; For Use with Axil Z Power/Data Center 15" 591⁄4" 697⁄8" 28F6070MWBEF2 $8469 $9764 $8978 $10070 $8691
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System 15" 591⁄4" 697⁄8" 28F6070MWBEF4 $8469 $9764 $8978 $10070 $8691
For model 28F6070MWBEF2, specify one Axil Z power center (model 45F0214EAXZPDB) separately. ➤See page 2.67. For model 28F6070MWBEF4, specify power harness with one Axil Z power center for use with fixed end media wall (model 28AIAXZPD1B) separately. ➤See page 2.68.
Canopy Kimball Benching
Standard Includes • Canopy • Shelf with upholstered cushion • Fixed frame with H-frame to attach
to the bench end • Hardware
How to Specify ! Model @ Canopy material: LD2 = HPL on both sides FLD2 = Felt on inside curve,
HPL on outside curve MD2 = Writable laminate on
both sides FMD2 = Felt on inside curve,
writable laminate on outside curve
MLD2 = Writable laminate on inside curve, HPL on outside curve
3 Felt color designator, if applicable, for canopy
4 HPL or writable laminate finish designator for canopy
5 Shelf HPL finish designator 6 Cushion fabric grade 7 Cushion fabric color 8 Paint designator: 501 = Platinum metallic (no
upcharge)
Fixed End Seat for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.44
PricingCANOPY®
Height Adjust
Cushion attaches to HPL shelf. Cushion fabric is applied railroad (horizontal) fashion.
Seating HPL/ Felt/ Writable Felt/ Writable/ Fabric HPL HPL Laminate Writable HPL D W H Model Grade (LD2) (FLD2) (MD2) (FMD2) (MLD2) 193⁄4" 591⁄4" 697⁄8" 28F6070SBEF 1 $9102 $10398 $9626 $10718 $9339 2 9168 10464 9692 10784 9405 3 9206 10502 9730 10822 9443 4 9250 10546 9774 10866 9487 5 9311 10607 9835 10927 9548 6 9373 10669 9897 10989 9610 7 9435 10731 9959 11051 9672
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes • Round worksurface • Height-adjustable frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
Round Height-Adjustable Worksurface
End Media Wall for Bench
GSA Contract Pending
Page 2.45
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD2SE $5798 $6006 $6134 $6379 $7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD4SE $5798 $6006 $6134 $6379 $7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD2SE $6256 $6507 $7889 $7166 $8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD4SE $6256 $6507 $7889 $7166 $8127
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model 28F22GCP, may be specified to link end media wall with worksurface to bench. ➤See page 2.40 to specify. This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Half-Ellipse Height-Adjustable Worksurface
End Media Wall for BenchCANOPY Height Adjust
GSA Contract Pending
Page 2.46
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE2SE 5798 6006 6134 6379 7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE4SE 5798 6006 6134 6379 7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE2SE 6256 6507 7889 7166 8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE4SE 6256 6507 7889 7166 8127
Standard Includes • Half-ellipse worksurface • Height-adjustable frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93) X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model 28F22GCP, may be specified to link end media wall with worksurface to bench. ➤See page 2.40 to specify. This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Ellipse Height-Adjustable Worksurface
End Media Wall for BenchCANOPY Height Adjust
GSA Contract Pending
Page 2.47
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL2SE 5798 6006 6134 6379 7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL4SE 5798 6006 6134 6379 7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL2SE 6256 6507 7889 7166 8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL4SE 6256 6507 7889 7166 8127
Standard Includes • Ellipse worksurface • Height-adjustable frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model 28F22GCP, may be specified to link end media wall with worksurface to bench. ➤See page 2.40 to specify. This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Standard Includes • Round worksurface • Height-adjustable freestanding
frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD2SE $6940 $7148 $7276 $7520 $8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD4SE $6940 $7148 $7276 $7520 $8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD2SE $7396 $7648 $9031 $8308 $9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD4SE $7396 $7648 $9031 $8308 $9267
This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Pricing
Round Height-Adjustable Worksurface
Freestanding End Media WallCANOPY®
Height Adjust
Page 2.48
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Half-Ellipse Height-Adjustable Worksurface GSA Contract Pending
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE2SE 6940 7148 7276 7520 8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE4SE 6940 7148 7276 7520 8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE2SE 7396 7648 9031 8308 9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE4SE 7396 7648 9031 8308 9267
Standard Includes • Half-ellipse worksurface • Height-adjustable freestanding
frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93) X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
PricingFreestanding End Media WallCANOPY®
Height Adjust
Page 2.49
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
GSA Contract Pending
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Worksurface Without Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL2SE 6940 7148 7276 7520 8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL4SE 6940 7148 7276 7520 8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Worksurface Without Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL2SE 7396 7648 9031 8308 9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL4SE 7396 7648 9031 8308 9267
Standard Includes • Ellipse worksurface • Height-adjustable freestanding
frame • Standard up/down control switch • Equipment shelf
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators. 5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet 9 Equipment shelf HPL designator bl Paint designator 501 = Platinum metallic (no
upcharge)
This unit must be used with a canopy. Order model 28F6052CASE separately. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Pricing
Ellipse Height-Adjustable Worksurface
Freestanding End Media WallCANOPY®
Height Adjust
Page 2.50
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy Kimball Benching
Standard Includes • One height-adjustable rectangular
worksurface with standard up/down control switch
• One round fixed-height worksurface
• Frame • Bench cushions
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option for
rectangular worksurface: X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group: STD = Group 1
STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Shelf HPL designator 9 Cushion fabric grade bl Cushion fabric color bm Paint designator 501 = Platinum metallic (no
upcharge)
Meeting Booth for BenchCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.51
PricingCANOPY®
Height Adjust
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim Edge D W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB1SE 1 $7069 $7131 $7391 $7459 $9304 2 7108 7170 7430 7498 9343 3 7131 7193 7453 7521 9366 4 7156 7218 7478 7546 9391 5 7192 7254 7514 7582 9427 6 7229 7291 7551 7619 9464 7 7266 7328 7588 7656 9501
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB1SE 1 $7474 $7541 $9406 $8252 $10433 2 7513 7580 9445 8291 10472 3 7536 7603 9468 8314 10495 4 7561 7628 9493 8339 10520 5 7597 7664 9529 8375 10556 6 7634 7701 9566 8412 10593 7 7671 7738 9603 8449 10630
This unit must be attached to a bench. Order ganging connector model 28F29GCP separately. ➤See page 2.40 to specify. Cushion fabric is applied railroad (horizontal) fashion. This unit must be used with a canopy. Order one 28F7243CAS and two 28F3043CAS models. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes • One height-adjustable rectangular
worksurface • One round fixed-height
worksurface • Frame • Power/data tray • Bench cushions
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option for
rectangular worksurface: X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group: STD = Group 1
STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Shelf HPL designator 9 Cushion fabric grade bl Cushion fabric color bm Paint designator 501 = Platinum metallic (no
upcharge)
For Use with Axil Z Power/Data Center
Meeting Booth for Bench with Power/Data TrayCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim Edge D W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB2SE 1 $7363 $7426 $7686 $7753 $9598 2 7402 7465 7725 7792 9637 3 7425 7488 7748 7815 9660 4 7450 7513 7773 7840 9685 5 7486 7549 7809 7876 9721 6 7523 7586 7846 7913 9758 7 7560 7623 7883 7950 9795
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB2SE 1 $7769 $7835 $9699 $8546 $10728 2 7808 7874 9738 8585 10767 3 7831 7897 9761 8608 10790 4 7856 7922 9786 8633 10815 5 7892 7958 9822 8669 10851 6 7929 7995 9859 8706 10888 7 7966 8032 9896 8743 10925
Page 2.52
PricingCANOPY®
Height Adjust
This unit must be attached to a bench. Order ganging connector model 28F29GCP separately. ➤See page 2.40 to specify. Cushion fabric is applied railroad (horizontal) fashion. This unit must be used with a canopy. Order one 28F7243CAS and two 28F3043CAS models. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes • One height-adjustable rectangular
worksurface • One round fixed-height
worksurface • Frame • Power/data tray • Bench cushions
How to Specify ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Grommet/cut-out option for
rectangular worksurface: X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group: STD = Group 1
STD2 = Group 2 (+20%) 6 Worksurface finish designator 7 Worksurface rim finish designator: 8 Shelf HPL designator 9 Cushion fabric grade bl Cushion fabric color bm Paint designator 501 = Platinum metallic (no
upcharge)
For Use with Interlink iQ Single-Circuit Power System
Meeting Booth for Bench with Power/Data TrayCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim Edge D W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB4SE 1 $7363 $7426 $7686 $7753 $9598 2 7402 7465 7725 7792 9637 3 7425 7488 7748 7815 9660 4 7450 7513 7773 7840 9685 5 7486 7549 7809 7876 9721 6 7523 7586 7846 7913 9758 7 7560 7623 7883 7950 9795
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB4SE 1 $7769 $7835 $9699 $8546 $10728 2 7808 7874 9738 8585 10767 3 7831 7897 9761 8608 10790 4 7856 7922 9786 8633 10815 5 7892 7958 9822 8669 10851 6 7929 7995 9859 8706 10888 7 7966 8032 9896 8743 10925
Page 2.53
PricingCANOPY®
Height Adjust
This unit must be attached to a bench. Order ganging connector model 28F29GCP separately. ➤See page 2.40 to specify. Cushion fabric is applied railroad (horizontal) fashion. This unit must be used with a canopy. Order one 28F7243CAS and two 28F3043CAS models. ➤See planning pages for details. ➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes • Base • Mounting hardware
How to Specify
Top ! Model @ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rim W = Wood with wood rim
D = Plywood with self edge 3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W) 4 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%) 5 Surface finish designator 6 Rim finish designator Pneumatic Base ! Model 2 Finish:
405 = Designer White 425 = Shadow 462 = Cinder 501 = Platinum Metallic (+10%)
514 = Carbon Metallic (+10%) 544 = Silver Pearl (+10%)
Tops and Pneumatic BaseCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
† GSA SIN 711-2
Page 2.54
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim Edge D W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Round Top
42" diameter 3⁄4" 28W42RD $601 $649 $873 $942 $1657
Rectangular Top
24" 42" 3⁄4" 28W2442RT $402 $439 $479 $526 $924
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim Edge D W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Round Top
42" diameter 3⁄4" 28W42RD $899 $970 $1713 $1338 $1747
Rectangular Top
24" 42" 3⁄4" 28W2442RT $491 $952 $542 $658 $1041
D W H Model Price
Priority Height-Adjustable Pneumatic Square Base 24" 24" 26" –42" 53K2626BSGMP † $3110
Canopy Kimball Benching
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material/rim material: LL = TFL both sides, vinyl edge LLD = TFL both sides, ply edge FLL = Felt one side, TFL one
side, vinyl edge FLLD = Felt one side, TFL one
side, ply edge 3 Felt color designator, if
applicable 4 TFL finish designator (same both
sides) 5 Vinyl edge finish designator, if
applicable
TFL
Fixed-Height Center ScreensCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.55
PricingCANOPY®
Height Adjust
Screen width must be the same width as the bench.
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL on Both Sides 3⁄4" 60" 221⁄8" 28F6022CS $552 $596 3⁄4" 72" 221⁄8" 28F7222CS 590 636 3⁄4" 60" 361⁄4" 28F6036CS 690 744 3⁄4" 72" 361⁄4" 28F7236CS 799 862 Felt/TFL Vinyl Ply Rim Rim D W H Model (FLL) (FLLD)
Felt on One Side, TFL on One Side 3⁄4" 60" 221⁄8" 28F6022CS $1224 $1268 3⁄4" 72" 221⁄8" 28F7222CS 1262 1308 3⁄4" 60" 361⁄4" 28F6036CS 1361 1415 3⁄4" 72" 361⁄4" 28F7236CS 1637 1685
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: L = HPL both sides, vinyl edge
LD = HPL both sides, ply edgeLD2 = HPL both sides, plywood edge
FL = Felt one side, HPL one side, vinyl edge
FLD = Felt one side, HPL one side, ply edge
FLD2 = Felt one side, HPL one side, plywood edge
3 Felt color designator, if applicable
4 HPL finish designator (same both sides)
5 Vinyl edge finish designator, if applicable
HPL
Fixed-Height Center ScreensStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.56
HPL/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (L) (LD) (LD2)
HPL on Both Sides 3⁄4" 60" 221⁄8" 28F6022CS $732 $790 $1445 3⁄4" 72" 221⁄8" 28F7222CS 766 827 1892 3⁄4" 60" 361⁄4" 28F6036CS 987 1066 2663 3⁄4" 72" 361⁄4" 28F7236CS 1054 1138 2851 Felt/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (FL) (FLD) (FLD2)
Felt on One Side/HPL on One Side 3⁄4" 60" 221⁄8" 28F6022CS $1404 $1461 $2116 3⁄4" 72" 221⁄8" 28F7222CS 1438 1499 2564 3⁄4" 60" 361⁄4" 28F6036CS 1659 1738 3335 3⁄4" 72" 361⁄4" 28F7236CS 1724 1809 3522
Screen width must be the same width as the bench.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: M = Writable laminate both
sides, vinyl edge MD = Writable laminate both
sides, ply edge MD2 = Writable laminate both
sides, plywood edge FM = Felt one side, writable lam-
inate one side, vinyl edge FMD = Felt one side, writable
laminate one side, ply edge FMD2 = Felt one side, writable
laminate one side, plywood edge ML = Writable laminate one side,
HPL one side, vinyl edge MLD = Writable laminate one
side, HPL one side, ply edge MLD2 = Writable laminate one
side, HPL one side, plywood edge
3 Felt color designator, if applicable
4 Writable laminate designator 5 Vinyl edge finish designator, if
applicable
Writable Laminate
Fixed-Height Center ScreensStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.57
Writable Laminate Vinyl Ply Plywood Rim Rim Edge D W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides 3⁄4" 60" 221⁄8" 28F6022CS $768 $829 $1517 3⁄4" 72" 221⁄8" 28F7222CS 809 873 1987 3⁄4" 60" 361⁄4" 28F6036CS 1036 1117 2798 3⁄4" 72" 361⁄4" 28F7236CS 1106 1193 2993
Writable Laminate/Felt Vinyl Ply Plywood Rim Rim Edge D W H Model (FM) (FMD) (FMD2)
Felt on One Side/Writable Laminate on One Side 3⁄4" 60" 221⁄8" 28F6022CS $1439 $1501 $2188 3⁄4" 72" 221⁄8" 28F7222CS 1481 1544 2658 3⁄4" 60" 361⁄4" 28F6036CS 1708 1789 3468 3⁄4" 72" 361⁄4" 28F7236CS 1777 1865 3665
Writable Laminate/HPL Vinyl Ply Plywood Rim RIm Edge D W H Model (ML) (MLD) (MLD2)
Writable Laminate on One Side, HPL on One Side 3⁄4" 60" 221⁄8" 28F6022CS $738 $799 $1486 3⁄4" 72" 221⁄8" 28F7222CS 774 835 1948 3⁄4" 60" 361⁄4" 28F6036CS 1007 1089 2744 3⁄4" 72" 361⁄4" 28F7236CS 1064 1148 2936
Screen width must be the same width as the bench.
Canopy Kimball Benching
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside 3 Felt color designator, if
applicable 4 HPL or writable laminate finish
designator
For Bench 1, 2, and 4
Fixed Canopy Screens CANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.58
PricingCANOPY®
Height Adjust
HPL/HPL D W H Model (LD2)
HPL on Inside Curve
For Use on Bench 1, 2, or 4 3⁄4" 60" 43" 28F6043CAS $5304 3⁄4" 72" 43" 28F7243CAS 5904 Felt/ Felt/ HPL Writable D W H Model (FLD2) (FMD2)
Felt on Inside Curve 3⁄4" 60" 43" 28F6043CAS $6278 $6557 3⁄4" 72" 43" 28F7243CAS 7070 7346
Writable Writable Laminate Lam/ HPL D W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve 3⁄4" 60" 43" 28F6043CAS $5838 $5571 3⁄4" 72" 43" 28F7243CAS 6468 6181
Canopy width must be the same width as the bench.
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside 3 Felt color designator, if
applicable 4 HPL or writable laminate finish
designator
HPL/HPL D W H Model (LD2)
HPL on Inside Curve 3⁄4" 591⁄4" 52" 28F6052CASE $5667
Felt/ Felt/ HPL Writable D W H Model (FLD2) (FMD2)
Felt on Inside Curve 3⁄4" 591⁄4" 52" 28F6052CASE $6642 $6918
Writable Writable Laminate Lam/ HPL D W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve 3⁄4" 591⁄4" 52" 28F6052CASE $6229 $5942
Canopy Kimball Benching
Pricing
For End Media Wall with Height-Adjustable Worksurface
Fixed Canopy ScreensCANOPY®
Height Adjust
Page 2.59
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside 3 Felt color designator, if
applicable 4 HPL or writable laminate finish
designator
HPL/HPL D W H Model (LD2)
HPL on Inside Curve 3⁄4" 30" 43" 28F3043CAS $3421 3⁄4" 72" 43" 28F7243CAS 5904 Felt/ Felt/ HPL Writable D W H Model (FLD2) (FMD2)
Felt on Inside Curve 3⁄4" 30" 43" 28F3043CAS $3955 $4063 3⁄4" 72" 43" 28F7243CAS 7070 7346
Writable Writable Laminate Lam/ HPL D W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve 3⁄4" 30" 43" 28F3043CAS $3648 $3530 3⁄4" 72" 43" 28F7243CAS 6468 6181
Canopy Kimball Benching
Pricing
For Meeting Booth
Fixed Canopy ScreensCANOPY®
Height Adjust
Page 2.60
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy Kimball Benching
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: LL = TFL both sides, vinyl edge LLD = TFL both sides, ply edge
FLL = Felt on user side, TFL on outside, vinyl edge
FLLD = Felt on user side, TFL on outside, ply edge
3 Felt color designator, if applicable
4 TFL finish designator 5 Vinyl edge finish designator, if
applicable
TFL
Worksurface Privacy ScreensCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.61
PricingCANOPY®
Height Adjust
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWS $496 $536 3⁄4" 60" 15" 28F6015PSWS 496 536 3⁄4" 72" 15" 28F7215PSWS 530 572
Felt/TFL Vinyl Ply Rim Rim D W H Model (FLL) (FLLD)
Felt on User Side/TFL on the Outside 3⁄4" 591⁄4" 15" 28F5915PSWS $1167 $1206 3⁄4" 60" 15" 28F6015PSWS 1167 1206 3⁄4" 72" 15" 28F7215PSWS 1202 1243
IMPORTANT: 28F5915PSWS model is for use on height-adjustable table ends with rectangular or half-round surface. ➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: L = HPL both sides, vinyl edge LD = HPL both sides, ply edge LD2 = HPL both sides, plywood
edge FL = Felt on user side, HPL on
outside, vinyl edge FLD = Felt on user side, HPL on
outside, ply edge FLD2 = Felt on user side, HPL
on outside, plywood edge 3 Felt color designator, if applicable 4 HPL finish designator 5 Vinyl edge finish designator, if
applicable
HPL
Worksurface Privacy ScreensCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.62
PricingCANOPY®
Height Adjust
HPL/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (L) (LD) (LD2)
HPL on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWS $586 $631 $1155 3⁄4" 60" 15" 28F6015PSWS 586 631 1155 3⁄4" 72" 15" 28F7215PSWS 613 664 1355
Felt/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (FL) (FLD) (FLD2)
Felt on User Side/HPL on Outside 3⁄4" 591⁄4" 15" 28F5915PSWS $1256 $1303 $1827 3⁄4" 60" 15" 28F6015PSWS 1256 1303 1827 3⁄4" 72" 15" 28F7215PSWS 1284 1334 2027
IMPORTANT: 28F5915PSWS model is for use on height-adjustable table ends with rectangular or half-round surface. ➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
• Screen • Attachment hardware
How to Specify ! Model @ Material: M = Writable laminate both
sides, vinyl edge MD = Writable laminate both
sides, ply edge MD2 = Writable laminate both
sides, plywood edge ML = Writable laminate on user
side, HPL on outside, vinyl edge MLD = Writable laminate on user
side, HPL on outside, ply edge MLD2 = Writable laminate on
user side, HPL on outside, plywood edge
3 Felt color designator, if applicable
4 Writable laminate and/or HPL finish designator
5 Vinyl edge finish designator, if applicable
Writable Laminate
Worksurface Privacy ScreensCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.63
PricingCANOPY®
Height Adjust
Writable Laminate Vinyl Ply Plywood Rim Rim Edge D W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWS $614 $664 $1212 3⁄4" 60" 15" 28F6015PSWS 614 664 1212 3⁄4" 72" 15" 28F7215PSWS 644 695 1453
Writable Laminate/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (ML) (MLD) (MLD2)
Writable Laminate on User Side/HPL on Outside 3⁄4" 591⁄4" 15" 28F5915PSWS $606 $655 $1201 3⁄4" 60" 15" 28F6015PSWS 606 655 1201 3⁄4" 72" 15" 28F7215PSWS 635 688 1395
IMPORTANT: 28F5915PSWS model is for use on height-adjustable table ends with rectangular or half-round surface. ➤See pages 2.41 and 2.42.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen • Accessory rail • Attachment hardware
How to Specify ! Model @ Material: LL = TFL on both sides, vinyl
edge LLD = TFL on both sides, ply
edge L = HPL on both sides, vinyl
edge LD = HPL on both sides, ply
edge LD2 = HPL on both sides,
plywood M = Writable laminate on both
sides, vinyl edge MD = Writable laminate on both
sides, ply edge MD2 = Writable laminate on
both sides, plywood edge ML = Writable laminate user
side, HPL outside, vinyl edge MLD = Writable laminate user
side, HPL outside, ply edge MLD2 = Writable laminate user
side, HPL outside, plywood edge 3 Felt color designator, if
applicable 4 Writable laminate and/or HPL
finish designator 5 Vinyl edge finish designator, if
applicable
Worksurface Privacy Screens with Accessory RailStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.64
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL Screens on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSAR $571 $616 3⁄4" 60" 15" 28F6015PSWSAR 571 616 3⁄4" 72" 15" 28F7215PSWSAR 609 656
HPL/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (L) (LD) (LD2)
HPL Screens on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSAR $644 $694 $1271 3⁄4" 60" 15" 28F6015PSWSAR 644 694 1271 3⁄4" 72" 15" 28F7215PSWSAR 674 729 1466
Writable Laminate Vinyl Ply Plywood Rim Rim Edge D W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSAR $675 $729 $1333 3⁄4" 60" 15" 28F6015PSWSAR 675 729 1333 3⁄4" 72" 15" 28F7215PSWSAR 708 763 1496
Writable Laminate/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (ML) (MLD) (MLD2)
Writable Laminate on User Side/HPL on Outside 3⁄4" 591⁄4" 15" 28F5915PSWSAR $668 $707 $1321 3⁄4" 60" 15" 28F6015PSWSAR 668 707 1321 3⁄4" 72" 15" 28F7215PSWSAR 698 754 1436
IMPORTANT: 28F5915PSWSAR model is for use on height-adjustable table ends with rectangular or half-round surface. ➤See pages 2.41 and 2.42. Accessories ➤See page 2.75.
Canopy Kimball Benching
Standard Includes
• Screen • Bungee cord • Attachment hardware
How to Specify ! Model @ Material: LL = TFL, vinyl edge LLD = TFL, ply edge L = HPL, vinyl edge LD = HPL, ply edge LD2 = HPL, plywood edge 3 TFL or HPL finish designator 5 Vinyl edge finish designator, if
applicable
Worksurface Privacy Screen with Bungee CordsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.65
PricingCANOPY®
Height Adjust
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSBC $991 $1071 3⁄4" 60" 15" 28F6015PSWSBC 991 1071 3⁄4" 72" 15" 28F7215PSWSBC 1061 1113
HPL/HPL Vinyl Ply Plywood Rim Rim Edge D W H Model (L) (LD) (LD2)
HPL on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSBC $1112 $1144 $1844 3⁄4" 60" 15" 28F6015PSWSBC 1112 1144 1844 3⁄4" 72" 15" 28F7215PSWSBC 1165 1200 2072
IMPORTANT: 28F5915PSWBC model is for use on height-adjustable table ends with rectangular or half-round surface. ➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
Cable Carrier • Plastic: silver • Attachment hardware Cable Basket • Metal: silver • Attachment hardware End Media Wall Cable Manager • Satin anodized aluminum • Attachment hardware Carousel Center Drawer • Plastic: silver • Rotates 360° • 81⁄4" front-to-back and 135⁄8"
side-to-side clearance required
How to Specify
Plastic Cable Carrier, Metal Cable Basket, End Media Wall Cable Manager, and Carousel Center Drawer ! Model Undersurface Cable Tray ! Model 2 Paint designator
Cable Management and Organizational AccessoriesCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.66
PricingCANOPY®
Height Adjust
D W H Model Price
Plastic Cable Carrier 3⁄4" 21⁄4" 411⁄8" 45FCCS $224
Perforated Cable Tray for Use with G34 Worksurface Grommet 33⁄4" 35" 65⁄8" 28A3506CTWP $437
Metal Cable Basket 4" 141⁄2" 31⁄4" back 45F14CBS $77 13⁄4" front
4" 311⁄8" 31⁄4" back 45F31CBS $99 13⁄4" front
End Media Wall Cable Manager 27⁄8" 26" 3⁄4" 28A0326CM $120
Carousel Center Drawer 81⁄4" 135⁄8" 13⁄8" 99K0817CDR $73
4"
13⁄4"31⁄4"
Canopy Kimball Benching
Standard Includes
• Housing: black anodized aluminum body with painted steel faceplate and receptacles
• Six 15-amp waterproof receptacles
• 3-prong plug with circuit breaker 2"D x 17⁄8"W x 11⁄2"H attached to 6' cord
• Overload protection with reset but-ton
• Two data openings with voice/data adapter kit
• Mounts in bench 2 power data tray opening from underside with 2 screws provided
• Plugs directly into floor or wall outlet
• Cannot be used to link power table to table
How to Specify ! Model
For Use with Bench 2
Axil® Z Power/Data CenterCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.67
PricingCANOPY®
Height Adjust
D W H Model Price
Axil Z Power Center 21⁄4" 14" 21⁄2" 45F0214EAXZPDB $1168
U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
Canopy Kimball Benching
Standard Includes
Power In-Feed • 10' black power cord with 15-amp
3-prong plug • Sensor box • Modular connector Power Harness with Axil Z Power/Data Centers • One or two power/data centers.
Each has the following: – Three 15-amp receptacles – One blank data port Total of 6 receptacles and 2 blank data per 2 person bench
• Housing: black anodized aluminum body with painted steel faceplates and receptacles
• Receptacles are waterproof in the event of accidental spills
• Power centers connect to each other and have attached a 60" har-ness to link to the next table. Additional jumpers are not required.
How to Specify ! Model
For Use with Bench 4 or Media Wall
Interlink iQ Single-Circuit Power System ComponentsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA SIN 711-1
† GSA SIN 711-18
U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
Page 2.68
PricingCANOPY®
Height Adjust
D W H Model Price
Power In-Feed 21⁄4"* 8" 21⁄2" 45FEI2IF2 $686
Power Harness with Two Axil Z Power/Data Centers for Bench 4 21⁄4" 8" 21⁄2" * 45FEIAXZPDB2 $1207 *Dimensions are for each power center.
Power Harness with One Axil Z Power Center for Fixed End Media Wall 21⁄4" 8" 21⁄2" ** 28AIAXZPD1B2 † $633 **Dimensions are for power center.
Canopy Kimball Benching
Standard Includes
Ellora Power/Data Center with Hinged Lid for G28 Grommet • Housing: silver or black
powdercoat • Hinged lid (allows technology to
remain connected when lid is closed while concealing the con-nection)
• Three 15-amp power receptacles • One USB • Two data openings • Data port adapter kit: black • 10' cord Ellora Single-Circuit Power/Data Center with Hinged Lid for G20 Grommet • Housing: silver powdercoat • Hinged lid (allows technology to
remain connected when lid is closed while concealing the con-nection)
• Three 15-amp power receptacles • One data opening • Data port adapter kit: black • 10' cord Node Power Center • 10' cord with three-prong plug • Two power receptacles • Metallic silver powdercoat finish • Fits C6 cut-out Node Power/USB Center • 10' cord with three-prong plug • One power receptacle • One duplex USB • Metallic silver powdercoat finish
How to Specify ! Model
D W H Model Fits Cut-Out Size Price
Xsede Ellora® Power/Data Center with Hinged Lid Silver
51⁄4" 111⁄4" 31⁄2" 45APDCSAAPC † G28 $ 1158
Black
51⁄4" 111⁄4" 31⁄2" 45APDCSABPC † G28 $ 1274
Perks® Ellora® Power/Data Center 55⁄16" 85⁄16" 31⁄2" 99KPDCAMPC † G20 $ 521
Perks® Node® Power Center 33⁄8" 31⁄4" KCEBN20PP C6 $205
Perks® Node® Power/USB Center 33⁄8" 31⁄4" KCEBN11PU C6 $315
All electrical accessories are available for field installation only. U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
31⁄2"
Worksurface Cut-Out Mount
Power and Data ComponentsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA SIN 711-8
† GSA Contract Pending
Page 2.69
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Mho Power/Data Center • 10' cord with 15-amp straight,
three-prong plug • Two 15-amp receptacles • Two blank data ports that can
accommodate one of eight provided adapter plates
• Silver powdercoat finish • Pop-up lid that sits flush with
surface when closed Mho Power/Data/USB Center • 10' cord with 15-amp straight,
three-prong plug • Two 15-amp receptacles • One blank data port that can
accommodate one of eight provided adapter plates
• One port with two USB charging outlets
• Silver powdercoat finish • Pop-up lid that sits flush with
surface when closed Ashley Trio • Three receptacles • Two USB ports • One open port for HAIM, RJ45, or
VEGA • Data plate adapter kit • Housing: white • Bezel: white • 6'L white cord
How to Specify ! Model
D W H Model Fits Cut-Out Size Price
Perks® Mho® Pop-Up Power/Data Center with Three-Prong Plug 43⁄8" 83⁄8" 23⁄8" KCEB2PDPSPC † C4 $ 401
Perks® Mho® Pop-Up Power/Data/USB with Three-Prong Plug 43⁄8" 83⁄8" 23⁄8" KCEB2PDUPSPC † C4 $ 519
Perks® Ashley Trio™ Power/Data/USB Center 4" 9" 27⁄8" KCE0409ATSMWW C29 $371
Worksurface Cut-Out Mount, continued
Power and Data ComponentsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA SIN 711-8
† GSA Contract Pending
All electrical accessories are available for field installation only. U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
Page 2.70
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Pull-Up Power/USB Grommet • Four receptacles • Two USB ports • Overcurrent and voltage
protection • 10’ black cord • Finger-pull access • Black housing
How to Specify ! Model
D W H Model Fits Cut-Out Size Price
Perks® Pull-Up Power/USB Grommet 23⁄8" 111⁄4" 115⁄8"* KCE0211PUPUGMB 23⁄8"-diameter round cut-out. $272 Specify a G19 grommet and replace the plastic grommet with this model or field scribe. *When in stored position, unit extends 115⁄8" below the surface. Unit sits flush on surface when in use.
Worksurface Cut-Out Mount, continued
Power and Data ComponentsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Non-Contract
All electrical accessories are available for field installation only. U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
Page 2.71
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Mini-Tap Power Unit • Two receptacles • Mounting hardware • 6' black cord Mini-Tap Power/USB Unit • One receptacle • Two USB ports • Mounting hardware • 6' black cord Power Outlet Strip • Six outlets • 10' power cord Power Strip with Spiral Cord • Housing: black plastic • Six 15-amp (TR) tamper resistant
power receptacles • Overload protection with reset
button • Spiral cord: 5' minimum stretches
to 9' maximum with right hand 3-prong plug
• Two mounting screws provided to mount under worksurface
How to Specify ! Model
Undersurface Mount
Power and Data ComponentsCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Non-Contract
All electrical accessories are available for field installation only. U.L. listed. Any field modification of the electrical components voids the U.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under which installation must be made.
Page 2.72
PricingCANOPY®
Height Adjust
D W H Model Planning Factors Price
Perks® Mini-Tap® Power Unit 33⁄8" 3" 13⁄8" KCE0303MTPPUSMB Mount unit near the worksurface edge for easy access. $114
Perks® Mini-Tap® Power/USB Unit 33⁄8" 3" 13⁄8" KCE0303MTPUUSMB Mount unit near the worksurface edge for easy access. $246
Perks® Power Outlet Strip 13⁄4" 101⁄2" 11⁄2" 99KELPS † $83
Xsede® Power Strip with Spiral Cord for Use with Freestanding Worksurfaces and All Benches 13⁄4" 91⁄2" 13⁄4" 45APSSC † $241
Canopy Kimball Benching
How to Specify ! Model 2 Paint designator
Accessories for Worksurface G34 Accessory FrameCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.73
PricingCANOPY®
Height Adjust
D W H Model Description Price
Mounting Plate for Salt or Pepper Power Center 23⁄8" 5" 3⁄4" 28A0205MPSPWP Painted; power centers sold separately $274
Task Light 113⁄8" 5" 19" 28A22TLWP Column is silver; light dome is white and silver. $667 Paint selection is for mounting plate only.
Single Monitor Arm 5" 12" 28AMASWP Adjustable arm is silver. $840 Paint selection is for mounting plate only.
Dual Monitor Arm 5" 12" 28AMADWP Adjustable arm is silver. $1253 Paint selection is for mounting plate only.
Canopy Kimball Benching
How to Specify
Writable Marker Holder ! Model 2 Writable paint designator: 405M = Designer White All others ! Model 2 Paint designator
continued
Accessories for Worksurface G34 Accessory FrameCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA SIN 711-2
Page 2.74
PricingCANOPY®
Height Adjust
D W H Model Description Price
Utility Cup 5" 5" 61⁄4" 28A0506CHWP Stainless steel utility cup $281
Clock 23⁄8" 5" 61⁄4" 28A0506CLWP Black hands; number locations are open holes $318
Picture Frame 23⁄8" 5" 61⁄4" 28A0506PFWP Picture location is open; no covering $258
Wavy Shelf 35⁄8" 10" 61⁄4" 28A1006WSWP Painted $301
Small Writable Marker Holder 23⁄8" 10" 61⁄4" 28A1006DMHW Writable paint $291
Large Writable Marker Holder 23⁄8" 15" 61⁄4" 28A1506DMHW Writable paint $330
Canopy Kimball Benching
How to Specify ! Model 2 Paint designator
Accessories for Screen Accessory RailCANOPY Height Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76 GSA Contract Pending
Page 2.75
PricingCANOPY®
Height Adjust
D W H Model Description Price
Utility Cup 33⁄4" 31⁄2" 31⁄4" 28A0402CHPSP Stainless steel utility cup $263
Clock 1⁄4" 5" 5" 28A0505CLPSP Black hands; number locations are open holes $281
Picture Frame 1⁄4" 5" 5" 28A0505PFPSP Picture location is open; no covering $256
Name Plate 1⁄4" 85⁄8" 13⁄8" 28A0901NPPSP Name location is open; no covering $268
Wavy Shelf 21⁄2" 81⁄2" 3⁄8" 28A1006WSPSP $263
File Organizer 1" 13" 83⁄4" 28A1309FOPSP $281
Canopy Kimball Benching
Surface MaterialsWood CANOPY®
Height Adjust
Page 2.76
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Wood
Price Group 1 MC Amber Cherry CC Cordoba Cherry MH Mocha Cherry SC Sedona Cherry
IM Brighton Maple TM Huntington Maple ES Espresso Walnut MW Midtown Walnut TW Tribeca Walnut UW Urban Walnut CX Coco2 SX Sienna2 CO Canyon Straight Grain1
DF Driftwood Straight Grain1 YO Monterey Straight Grain1 NW Tuscan Straight Grain1
Price Group 23 CS Coco Sapele SS Sienna Sapele CZ Clear Zebrawood
1 Wood truss is constructed of beech wood. Canyon, Driftwood, Monterey, and Tuscan straight grain finishes on wood truss will be a complementary color match without the grain pattern.
2 Available on wood truss only. These fin-ishes will coordinate with finishes of the same name on price group 2 sapele.
3 Available on Canopy worksurfaces only;
upcharge applies.
Applies to: • Worksurfaces • Wood truss
➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process MPORTANT: Wood finishes applied to solid hardwood are complementary to the same wood finish applied to wood veneer, but not an exact match. ➤Contact Customer Service for more information. IMPORTANT: Woodgrain laminate is a commercially compatible match to the wood finish of the same name and designator with consideration for the most common application—laminate surfaces on a wood chassis. When laminate and wood are mixed in other applications, the flip that occurs naturally in veneer may influence the overall match from piece to piece.
Canopy Kimball Benching
Surface MaterialsLaminateCANOPY®
Height Adjust
Page 2.77
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
HPL
Applies to:
• Worksurfaces • Privacy and center screens • Canopy screens • Equipment shelf
TFL
Applies to:
• Worksurfaces • Privacy and center screens • Canopy screens
Woodgrain MC Amber Cherry CC Cordoba Cherry MH Mocha Cherry SC Sedona Cherry IM Brighton Maple TM Huntington Maple MW Midtown Walnut TW Tribeca Walnut UW Urban Walnut CO Canyon Straight Grain DF Driftwood Straight Grain YO Monterey Straight Grain NW Tuscan Straight Grain CZ Clear Zebrawood
Solid 480 Antique White 403 Chamois 462 Cinder 440 Cloud 405 Designer White 450 Fog 488 Frosty White 461 Graphite 420 Sandstone 425 Shadow 460 Storm 419 Wallaby
Woodgrain MC Amber Cherry CC Cordoba Cherry MH Mocha Cherry SC Sedona Cherry IM Brighton Maple TM Huntington Maple MW Midtown Walnut TW Tribeca Walnut UW Urban Walnut CO Canyon Straight Grain DF Driftwood Straight Grain YO Monterey Straight Grain NW Tuscan Straight Grain CZ Clear Zebrawood
Solid 480 Antique White 403 Chamois 462 Cinder 440 Cloud 405 Designer White 450 Fog 488 Frosty White 461 Graphite 416 Putty 420 Sandstone 425 Shadow 460 Storm 419 Wallaby
Pattern 874 Bronze Legacy 842 Canyon Zephyr 823 Carbon Evolv 841 Desert Zephyr 862 Grey Glace 844 Loden Zephyr 843 Misted Zephyr 846 Morro Zephyr 812 Mushroom Tigris 808 Nickel Evolv 807 Silcon Evolv 873 Tawny Legacy 805 Titanium Evolv 809 Tungsten Evolv 802 White Nebula 814 White Tigris
➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process IMPORTANT: Woodgrain laminate is a commercially compatible match to the wood finish of the same name and designator with consideration for the most common application—laminate surfaces on a wood chassis. When laminate and wood are mixed in other applications, the flip that occurs natu-rally in veneer may influence the overall match from piece to piece. Customer-specified laminate is available on: • HPL worksurfaces • HPL privacy screens • HPL center screens ➤See the Surface Materials Reference Guide.
Canopy Kimball Benching
continued
LaminateCANOPY®
Height Adjust
Page 2.78
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Writable Laminate
Applies to:
• Worksurfaces • Privacy and center screens • Canopy screens
Solid 405M Designer White
➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process
Canopy Kimball Benching
Surface MaterialsPaint and VinylCANOPY®
Height Adjust
Page 2.79
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Paint
Vinyl
Price Group 1 480 Antique White 427 Barley 437 Cement 403 Chamois 462 Cinder 440 Cloud 485 Dark Chocolate 405 Designer White 453 Environmental Grey 459 Featherstone 450 Fog 488 Frosty White 461 Graphite 445 Moon Beam 416 Putty 420 Sandstone 425 Shadow 465 Smoke 460 Storm 429 Tantalum 419 Wallaby
Price Group 21 111 Apricot Orange 103 Chive 106 Cloud Blue 107 Dark Blue 102 Drizzle 109 Fossil 113 Golden Rod 456 Granite 110 Silver Mink 105 Spinach Green 112 Tango Red
Price Group M 514 Carbon Metallic 507 Patina Metallic 501 Platinum Metallic1 505 Satin Bronze Metallic 544 Silver Pearl 504 Taupe Metallic 1 No upcharge for 501 Platinum Metallic
on Canopy product line
Woodgrain MC Amber Cherry IM Brighton Maple CO Canyon Straight Grain CZ Clear Zebrawood CC Cordoba Cherry DF Driftwood Straight Grain TM Huntington Maple MW Midtown Walnut MH Mocha Cherry YO Monterey Straight Grain SC Sedona Cherry TW Tribeca Walnut NW Tuscan Straight Grain UW Urban Walnut
Solid 480 Antique White 403 Chamois 462 Cinder 440 Cloud 485 Dark Chocolate 405 Designer White 450 Fog 488 Frosty White 461 Graphite 420 Sandstone 425 Shadow 460 Storm 419 Wallaby
Applies to: • Wood truss • Accessories
Applies to: • Softened rim (P) on worksurfaces • Privacy screen edges • Center screen edges
➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process Customer-specified paint (CSP) is not available on Canopy. IMPORTANT: Due to the reflective qualities of metallic paint, variations in color may occur.
Canopy Kimball Benching
Surface MaterialsFabric and FeltCANOPY®
Height Adjust
Page 2.80
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Fabric
Wool Felt
Applies to: • Fixed end seats • Meeting booth seat cushions
Applies to: • Screens • Canopies
19111 Apricot Orange 19103 Chive 19106 Cloud Blue 19107 Dark Blue 19113 Golden Rod 19117 Heathered Oatmeal 19119 Heathered Slate 19118 Heathered Stone 19105 Spinach Green 19112 Tango Red
Kimball Seating Fabric (Upholstery) Price Grades 1–7 ➤See the Surface Materials Reference Guide at www.kimball.com for the most up-to-date list of available seating fabric patterns.
➤See the Kimball Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: • Characteristics of wood • Special wood finishes • Customer-specified laminate (CSL) • Customer-specified paint (CSP) • Fabric application and colorways • Customer’s own material (COM)
overview • Alliance program • TB133 process