presentation on brick masonry, paint and plastering
TRANSCRIPT
![Page 1: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/1.jpg)
Welcome To Our Presentation
![Page 2: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/2.jpg)
Ahsanullah University of Science and Technology
Department of Civil Engineering
Details of Construction 2nd Year; 2nd Semester
Sec : A
![Page 3: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/3.jpg)
Presentation onBrick masonry, Paint and
Plastering
![Page 4: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/4.jpg)
Presented byGroup – 5
Group Members :
Abontee BaruaSanchari HalderMahfijur RahmanTusher Kanti MunshiAsif HasanYeasin Ali TalukderMd. Ashraful AlamSarwar Murshed
![Page 5: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/5.jpg)
What’s Masonry?
The construction of stone or brick which in hardened by heat is termed as masonry. It’s also defined as construction of building units bonded together with mortar.
Types: Masonry is basically a wall material. Masonry walls can be divided into three categories, as follows:Load bearing walls.Non-load bearing wallsRetaining walls.
Now from the point of view of using in construction, masonry can be divided into 4 categories, as follows: 1)Stone masonry 2)Brick masonry 3)Reinforced masonry & 4)Composite masonry
![Page 6: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/6.jpg)
BRICK MASONRY
What is Brick Masonry: Construction of brick units bonded together with mortar is termed as brick masonry. Brick is a building unit of hard inorganic clay material of a size which can be conveniently handled. The strength of brick masonry work depends upon the quality of bricks and type of mortar used.
BRICK MASONRY
What is Brick Masonry: Construction of brick units bonded together with mortar is termed as brick masonry. Brick is a building unit of hard inorganic clay material of a size which can be conveniently handled. The strength of brick masonry work depends upon the quality of bricks and type of mortar used.
![Page 7: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/7.jpg)
Types Of Bricks
Generally two types, =>Traditional bricks;
Size: 23cm*10cm*10cm (with mortar), =>Modular bricks;
Size: 20cm*10cm*10cm (with mortar).
For beautification other types of ceramic bricks are also be used
![Page 8: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/8.jpg)
Figure: Different shapes and random color bricks
![Page 9: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/9.jpg)
![Page 10: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/10.jpg)
GENERAL PRINCIPLES TO BE OBSERVED IN BRICK MASONARY CONSTRUCTION
1. The bricks used in a good work should be sound hard and well burnt with uniform size shape and color. The bricks should not absorb water more than 20% of their weight when dry when immersed in water at about 24 hours.
![Page 11: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/11.jpg)
2. The bricks should be thoroughly soaked in clear water . It helps to remove dirt, dust and other soluble salts which causes efflorescence. It also reduces their tendency of suction of water from wet mortar.
![Page 12: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/12.jpg)
3. The bricks should be laid on a full bed of mortar. They should be slightly pressed in to the bed mortar while laying so as to ensure proper adhesion.
![Page 13: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/13.jpg)
4. All the joints should be properly flushed and filled with mortar so that no cavity is left in between.
5. No brick bats should be used in the work except when it is absolutely necessary
6.Brick work is generally laid in the English bond .Other types of bonds like Flemish bond, diagonal bond, Dutch bond etc are also be used
![Page 14: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/14.jpg)
7. Only specified mortar of a good quality should be used in the work, the mortar ratio is 1:4 .Thickness of joints should not exceed 13mm in any case8. The bricks must be laid on proper bed with their frogs pointing upwards9. Plastering should be done after about 28 days of completion of brick masonry.
![Page 15: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/15.jpg)
15
Basic Brickwork Terminology
BedJoint
HeadJoint
Course - horizontal layer of brick
![Page 16: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/16.jpg)
Different positions of Brick
![Page 17: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/17.jpg)
17
Header - Bonds two wythes together Wythe: vertical layer 1 unit thick
Soldier - Laid on its end, face parallel
Rowlock - laid on face, end visible
Stretcher - long dimension horizontal & face parallel to the wall
![Page 18: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/18.jpg)
Masonry Joints
Concave
Flush
Racked
Concave
Struck
Weathered
Vee
Concave Joints
Raked Joints
![Page 19: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/19.jpg)
Why bond is necessary ???
• Eliminates continuous vertical joints• Imparts strength to the masonry• Defective arrangement reduces strength &
durability• A wall having continuous vertical joints
does not act as homogeneous mass
![Page 20: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/20.jpg)
English Bond Flemish Bond Stretching BondHeading BondGarden Wall BondFacing BondRaking BondDutch BondEnglish Cross-BondZig-Zag BondSilverlock’s bond
Types of Bond
![Page 21: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/21.jpg)
STRECTCHER BOND
HEADER BOND
ENGLISH BOND
FLEMISH BOND
FACING BOND
ZIG ZAG BOND
![Page 22: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/22.jpg)
ENGLISH BOND Heading course should never start with a queen closer Stretchers should have a minimum lap of ¼ their length
over the header Even number of half brick walls present same appearance For odd number we see stretcher on one face and header on
other In thick walls, the middle portion is entirely filled with
header
![Page 23: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/23.jpg)
FLEMISH BOND
Every course consists of header and stretcher Header are centered over stretcher Every alternate course start with header Closers are inserted next to the quoin
![Page 24: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/24.jpg)
Single flemish bond: Combination of english and flemish bond In a course, facing is flemish and backing
is english Cannot be adopted in walls having
thickness less than one and half brick Provided for the attractive appearance of
the flemish bond
![Page 25: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/25.jpg)
Double Flemish bond: Each course presents the same appearance both
in the face and back of the wall Every course consists of headers and stretchers
alternately Best suited for consideration of economy and
appearance This type of bonding is comparatively weaker
than English bond
![Page 26: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/26.jpg)
Comparison ??
English bond is strongerFlemish is more attractiveFlemish requires more attentionFlemish is economical
![Page 27: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/27.jpg)
Strength Of Brick Masonry Depends On:
1. TYPES & STRENGTH OF BRICKS
2. MIX OF MORTAR
3. SIZE & SHAPE OF MASONRY
CONSTRUCTION
![Page 28: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/28.jpg)
PERMISSIBLE COMPRESSIVE STRESS IN BRICK MASONRY
S.NO. Slenderness Ratio
Stress reduction Factor (Kf)
1 6 1
2 8 0.9
3 10 0.8
4 12 0.7
5 14 0.6
6 16 0.5
7 18 0.49
8 20 0.41
9 22 0.3
10 24 0.2
![Page 29: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/29.jpg)
Defects In Brick MasonryDefects In Brick Masonry
These may occurs due to following:These may occurs due to following:
![Page 30: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/30.jpg)
1. SULPHATE ATTAC
![Page 31: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/31.jpg)
Crystallization Of Salts From Bricks
![Page 32: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/32.jpg)
Corrosion Of Embedded Iron Or Steel
![Page 33: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/33.jpg)
Shrinkage On Drying
![Page 34: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/34.jpg)
NOW THE QUESTION MAY BE ARRISED ........
HOW CAN WE REMOVE DEFECTS IN BRICK MASONRY?
![Page 35: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/35.jpg)
WE CAN REMOVE DEFECTS IN BRICK MASONRY:• Sulphate attack can be removed by suitable
construction details and choosing materials.
• Efflorescence can be removed by brushing and washing the effected surface repeatedly
• Shrinkage on drying can be prevented by using good quality brick and by protecting masonry from moisture penetration
• Corrosion of embedded iron or steel can be removed by encasing the reinforcement or iron member in dense cement mortar .
![Page 36: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/36.jpg)
SEISMIC RISKS DUE TO BRICK MASSONRY IN BANGLADESH (DHAKA):
Earthquake cannot be prevented but the damage they cause can be greatly reduced by followingseismic provisions, proper structural planning, design and detailing.
AT THIS TIME DHAKA IS IN A GREAT RISK DUE TO EARTHQUAKE. IT CAN BE AN ABANDONED CITY, IF WE DO NOT TAKE ESSENTIAL STEPS.
![Page 37: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/37.jpg)
Plastering• DEFINATION OF PLASTERING:The word “plaster” comes from the Greek language meaning“to daub on”.This is a process of covering rough surfaces with a plasticmaterial to obtain an even , smooth , regular ,clean &durable surface. On the other hand we say that A mixture of lime or gypsum, sand, and water, sometimeswith fiber added, that hardens to a smooth solid and is usedfor coating walls and ceilings.
![Page 38: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/38.jpg)
Plastering Tools
• Trowel
• Float
• Hawk
![Page 39: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/39.jpg)
PLASTERING MATERIALS: 1. Cement
2. Lime or clay 3. Aggregates 4. Water 5. Accelerator 6. Admixture
![Page 40: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/40.jpg)
Cement
AggregateAdmixture
![Page 41: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/41.jpg)
SAND USED IN PLASTERING
• River Sand: Find, round, polished, it may have impurities like pebbles , contains gravels smaller in size, suitable for plastering.
• Fine Sand: All particles i.e.100% pass through #16(ASTM) sieve used for plastering.
Size: 1/16 in Fineness Modulus: 2.2-2.6
![Page 42: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/42.jpg)
There are several different types of Plaster
available such as :
(a) Lime Plaster (b) Cement Plaster (c) Mud Plaster (d) Stucco Plaster (e) Plaster on lath
KINDS OF PLASTERING :
![Page 43: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/43.jpg)
LIME PLASTER
When lime is used as the binding materials, it is called lime plaster.
Lime plaster is type of plaster composed of hydrated lime, sand and water. Lime plaster is similar to Lime mortar, the main difference is the based on use rather than composition. Hydraulic lime is harder and stronger .Mortar for lime plaster is usually prepared by mixing sand and lime in equal proportions. Cement is small quantity added to the mixture to improve its strength.
![Page 44: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/44.jpg)
PICTURE OF LIME PLASTER:
![Page 45: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/45.jpg)
MUD PLASTERING: The surface to be plastered is prepared exactly in the same manner as that
for lime or cement plaster. Mud plaster is generally applied in two coats, the first coat being 18mm thick while the thickness of the second coat is kept 6mm.
![Page 46: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/46.jpg)
STUCCO PLASTERING
Stucco is the name given to a decorative type of plaster which gives an excellent finish. Stucco plaster can be used for interior as well as exterior surfaces. It is usually laid in three coats making the total thickness of the plaster to about 25mm .the first coat is called the scratch coat ; the second a finer coat , also known as the brown coat, and the third is called white coat or finishing coat.
![Page 47: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/47.jpg)
PICTURE OF STUCCO PLASTER
![Page 48: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/48.jpg)
CEMENT PLASTER
When cement is used as the binding materials, it is called cement plaster. It is especially suited for damp condition. Cement plaster is usually applied in one coat. The thickness of coat can be 12mm, 15mm or 20mm depending upon the site conditions and type of building. When the thickness of plaster is more than 15mm. 6 MM thickness of cement plaster and cement mortar 1:3 or 1:4 is recommended for cement plastering on RCC surfaces.
![Page 49: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/49.jpg)
PICTURE OF CEMENT PLASTER
![Page 50: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/50.jpg)
PLASTER ON LATH
Lathing may be either of wood or that of expanded metal. Wooden lath consists of thin strips of well seasoned wood, about 25mm .in width and 90 to 120cm.
![Page 51: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/51.jpg)
PICTURE OF LATH PLASTER
![Page 52: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/52.jpg)
SPECIAL TYPES OF FINISHING
a) Smooth Cast b) Rough Cast c) Pebble Dash d) Scrapped Finish e) Textured Finish
![Page 53: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/53.jpg)
Smooth Cast It is a finish which presents levelled and smooth
surface. The mortar for the finish is made by mixing cement and fine sand in ratio of 1:3.
![Page 54: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/54.jpg)
Rough Cast
• It is a finish in which the mortar for the final coat contains a proportion of fairly big size coarse aggregates. The mortar for the finish is made by mixing cement fine sand & coarse aggregates in the ratio of 1: ½ : 3.
![Page 55: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/55.jpg)
Pebble Dash• It is a finish in which small pebbles or crushed
stones of suitable size are thrown on to a freshly applied final coat of mortar and left exposed. Ratio:
• cement : coarse sand =1:3
![Page 56: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/56.jpg)
Scrapped Finish
It is a finish in which the final coat after being leveled and allowed to stiffen for a few hours. The final coat is usually 6 to 12mm thickness
![Page 57: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/57.jpg)
Textured Finish In this finish, ornamental patterns or textured
surfaces are produced by working with various tools on the freshly applied final coat.
![Page 58: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/58.jpg)
Defects in plaster work
CrackingEfflorescenceFalling out of plasterBlowing of plaster
![Page 59: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/59.jpg)
Cracking a. Old surface not being properly prepared. b. Movements in the backing either on account due to
shrinkage caused by the drying of the backing material.
c. Excessive shrinkage of plaster due to the application
of mortar in thick coats.
![Page 60: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/60.jpg)
CRACKING
![Page 61: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/61.jpg)
Efflorescence It is solvable salt are present in
bricks or the mortar they absorb moisture
From atmosphere and go in to solution which appears on the surface in the form of whitish substance as the moisture dries out and the salts crystallize.
Remove of efflorescence by applying a solution zinc sulphet and water and brushing off the surface when dry.
![Page 62: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/62.jpg)
Falling out of plaster
a. The adhesion of the plaster to the back ground may not be perfect.
b. The suction of the backing materials may not be uniform.
c. Excessive thermal changes in plaster.
![Page 63: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/63.jpg)
Blowing of plaster
This consists of information of small patches of plaster swelling out beyond the plastered surface and chiefly due to improper slaking of lime particles in the plaster.
![Page 64: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/64.jpg)
ADVANTAGES OF PLASTERING
a) Easy in application b) No surgery is required. c) Plaster is the most common form of
interior wall finishing d) If properly mixed and applied, a plaster
coating creates a stronger and more durable.
![Page 65: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/65.jpg)
DISADVANTAGES OF PLASTERING
a) When plaster cracks then difficult to repair.b) Repairing is very expensive.
c) Despite the extra labor of hanging and finishing drywall, it tends to be less expensive than plastering
![Page 66: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/66.jpg)
PAINT What is paint? Paints generally consist of three components:
Pigment, Binder, and Solvent. The pigment gives colour, the binder makes sure the pigment stays where you put it and the solvent makes the paint fluid and evaporates when you have applied the paint.
Constituents of an Oil Paint:• A base• An inert filler or extender• Coloring pigment• A vehicle• A solvent or thinner• A drier
![Page 67: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/67.jpg)
Characteristics of a Good Paint
• stick well to surface & able to seal porous substrata• consistency should provide easy workability• thickness should be adequate for good protection & decoration• paint film should dry easily• able to withstand adverse weather effect without losing gloss• offer resistance to failure by checking, cracking & flaking• possess good moisture resistance• color should not fade
![Page 68: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/68.jpg)
Types of Paints Aluminum paints Anti-corrosive paints Asbestos paints Bituminous paints Bronze paints Cellulose paints Casein paints Cement based paints Enamel paints Oil paints Rubber base paints
![Page 69: Presentation on Brick Masonry, Paint and Plastering](https://reader036.vdocuments.site/reader036/viewer/2022062307/554a0869b4c9055b7a8b57a6/html5/thumbnails/69.jpg)
Thank you all...