pre-milled abutments complete solutions
TRANSCRIPT
PRE-MILLED ABUTMENTSCOMPLETE SOLUTIONS
GET BETTER WITH DESS
PRE-MILLED BLANKS IN TITANIUM AND COBALT-CHROME FOR MOST OF THE IMPLANT BRANDS
HOLDER SYSTEMS FOR IMES-ICORE® VHF® ZirkonZahn®
AND ANY MACHINE WITH STANDARD 98 mm DISC HOLDER
DESS PRE-MILLED BLANKS AND HOLDERS SOLUTION
DESS becomes the reference again when it comes to dental CAD CAM solutions
Back in 2012 DESS produced the first pre-milled blanks but the market was not ready then yet.
In the recent years, however, both in-house milling machines and the cad cam softwares have improved and made feasible the in-house production of customised abutments using these solution.
So now DESS offers a full assortment of Titanium grade V and Cobalt Chrome pre-milled blanks and optimise the milling process with the known quality of the DESS standard abutments.
The blanks works together with holder systems specially developed for Imes-Icore® VHF® machines, ZirkonZahn® wet mill and a universal holder for any other machine that use standard 98 mm discs.
The DESS proprietary holder system has several advantages to other solutions:
Quick ”screw-on” system where the pre-milled blanks are attached to the sub-holder outside the machine and then placed in the holder that remains in the machine.
Much cleaner and faster.
Also, due to the unique way of “pull down and lock” holding system per pre-milled blank, the maximum precision and stability during the milling process is achieved.
Pre-milled socket positions and sub-holders are laser identified to better ensure what is where and optimise the milling process.
The pre-milled blanks are a reference of a wise and reliable solution:
A total millable length of 20 mm makes it one of the
longest in the market.
Minimal gingival transition height,
just 0,3 mm to allow a maximum degree of design freedom.
Two diameters: 10 mm for Titanium and
14 mm for Cobalt-Chrome
The materials used are the finest Titanium Grade V ELI (extra low intersticial) or also called Grade 23, and the exclusive Micro Melt Cobalt-Chrome.
This Cobalt-Chrome alloy has several advantages to others available to the market. First of all it has no internal tension so however radical the design is, the final custom abutment will preserve the shape along the process and result in less risk for ceramic cracks.
This alloy is also easier to mill than other Cobalt-Chrome solutions which will preserve your tools. Last but not least we can provide you with the exact thermal expansion coefficient to assure the highest level of quality on your final work.
“Pull down and lock” holding system.
Developed by DESS back in 2012, allows a strong and precise
positioning of the pre-milled blank inside its socket
The superb quality and fitting connection to implant, trademark
of DESS for almost 10 years.
ref. 61.xxx
ref. 71.xxx
Pre-milled Ti
Pre-milled CoCr
PRE-MILLED Titanium and CoCr Blanks allow the creation of one-piece customized abutments using in-house milling equipment. High quality as well as an accurate
connection fit is guaranteed.
Today’s CAD/CAM technology offers various possibilities to save both,
time and costs,
optimising the work-flow from the intra-oral scan, to designing and milling
the single crown; without the necessity of
preparing a working model.
The flexibility to choose from different implant connections
and platforms is another advantage when preferring to work with
DESS pre-milled titanium and Cobalt-Chrome blanks.
DESS pre-milled abutments are also included in the softwares of
Hyperdent and WorkNC.
Ti CoCr
Pre-milled blanks
External HexUniversal
NOBEL BRÅNEMARK®
Trilobe
NOBEL REPLACE® SELECT™
Active Hex
NOBEL ACTIVE™ & NOBEL REPLACE® CC
Octagon
STRAUMANN® SOFT TISSUE LEVEL SYNOCTA®
Titanium grade 5 or CoCr (Ni free)Screw included
platform NP/3,5 RP/4,1 WP/5,1Ti ø10mm reference 61.001 61.002 61.003CoCr ø14mm reference 71.001 71.002 71.003
platform NP/3,5 RP/4,3 WP/5,0Ti ø10mm reference 61.004 61.005 61.006CoCr ø14mm reference 71.004 71.005 71.006
platform NP/3,5 RP/4,3-5,0Ti ø10mm reference 61.041 61.042CoCr ø14mm reference 71.041 71.042
platform RP/RN 4,8 WP/WN 6,5Ti ø10mm reference 61.009 61.045CoCr ø14mm reference 71.009 71.045
Internal CAM
CAMLOG®
platform 3,3 3,8 4,3 5,0Ti ø10mm reference 61.064 61.065 61.066 61.067CoCr ø14mm reference 71.065 71.066
Ti CoCr
platform NP/NC RP/RCTi ø10mm reference 61.043 61.044CoCr ø14mm reference 71.043 71.044
platform 3,6 4,2 4,8Ti ø10mm reference 61.059 61.060 61.061CoCr ø14mm reference 71.059 71.060 71.061
platform RP/3,5-4,0 Aqua WP/4,5-5,0 Lilac
Ti ø10mm reference 61.024 61.025CoCr ø14mm reference 71.024 71.025
platform NP/3,4 RP/3,8 WP/4,5Ti ø10mm reference 61.038 61.039 61.040CoCr ø14mm reference 71.038 71.039 71.040
Conical BL
STRAUMANN® BONE LEVEL®
Internal HexConicASTRA TECH™ OSSEOSPEED™ AQUA & LILAC
Conic EVO
DENTSPLYASTRA EV®
Internal HexFD
DENTSPLY FRIADENT® XIVE®
Titanium grade 5 or CoCr (Ni free)Screw included
platform MINI STANDARDTi ø10mm reference 61.072 61.073CoCr ø14mm reference 71.072 71.073
Conic OSS
OSTEM® TS MINI TS STANDAR
Ti CoCr
Internal HexUSA
ZIMMER SCREW-VENT®
MIS® SEVEN
External HexUSA
3I® OSSEOTITE®
Internal Hex“Click”
3I® CERTAIN®
Internal MGEN
MEGAGEN® ANYRIDGE
Titanium grade 5 or CoCr (Ni free)Screw included
Pre-milled blanks
Zimmer® NP/3,5 RP/4,5 WP/5,7Mis® NP/3,75 RP/5,0-6,0
Ti ø10mm reference 61.017 61.018 61.019CoCr ø14mm reference 71.017 71.018 71.019
InternalANK
DENTSPLY ANKYLOS® C/X
platform NP/3,4 RP/4,1 WP/5,0Ti ø10mm reference 61.011 61.012 61.013CoCr ø14mm reference 71.011 71.012 71.013
platform NP/3,45 RP/4,1 WP/5,0Ti ø10mm reference 61.014 61.015 61.016CoCr ø14mm reference 71.014 71.015 71.016
platformTi ø10mm reference 61.057CoCr ø14mm reference 71.057
platformTi ø10mm reference 61.250CoCr ø14mm reference 71.250
platform
reference HLDSTD
reference HLDVHF
reference HLDVHFN4
reference HLDIMES
reference HLDZZ
Holder for standard 98 mm disc machines
Holder for imes-icore machinesCoritec 245i touchCoritec 250i touchCoritec 350i / Coritec 350i LoaderCoritec 450iCoritec 550iCoritec 650i / Coritec 650i Loader
Holders
Holder for VHF machinesVHF S1VHF S2VHF K5
Holder for VHF N4 machine
Adaptors for ZirkonZahn® machinesM1 abutmentM1 wet heavy metalM4 wet heavy metalM5 heavy metalM6 wet heavy metal
Holdersreference HLDVHF4
Holders for VHF Z4 machines
reference HDL3R20P
Holders for machines with support/changer 3R Yenadent D14P & others
All DESS products are manufactured according to ISO 9001:2008 and ISO 13485:2012 with CE marking for all products Class IIa.
3i® and 3i® Certain®, Miniplant®, MicroMiniplant™ and Osseotite® are registered trademarks of 3i Implant Innovations, USA ASTRA TECH™, OsseoSpeed™, ANKYLOS® C/X,
XiVE®, FRIADENT®, ASTRATECH implant system™ EV and UniAbutment® are registered trademarks ofDENTSPLY SIRONA Implants, BioHorizons® is a registered trademark of BioHorizons, INC.
Brånemark System®, NobelReplace® and Replace Select™, NobelActive™, NobelReplace® CC, NobelSpeedy™ and Multi-unit® are registered trademarks of Nobel Biocare AB, Sweden ITI®,
Straumann® and synOcta® are registered trademarks of Straumann Holding AG, Switzerland MIS® is a registered trademark of MIS Implant Technologies Ltd.
Zimmer Screw-Vent® and SwissPlus® are registered trademarks of Zimmer Dental INC, USA Dyna® is a registered trademark of Dyna Dental Engineering BV Locator® is a registered trademark of Zest Anchors INC.
DESS products can be used only by licensed dentists, physicians and labs.
Please refer always to the instructions of use available on the website
www.dess-abutments.com
or supplied with the product.
Some products may not be available in your country.
Please contact your local distributor for more details.
DOC-18-EN-02