powerkey pro 2200 · powerkey pro 2200 flexible - smart - rugged online set-up – an online set-up...

POWERKEY PRO 2200

FLEXIBLE - SMART - RUGGED

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

HARDWARE FEATURESIP68 rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 3 meter for more than 1 hour.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Icons shown on this keypad are for visual demonstration only.

SOFTWARE FEATURESCAN Keypad Addresses – Assign any valid CAN address to the keypad. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different pre-existing keys can be viewed at blinkmarine.com, and it is possible to order customized inserts.

PowerKey PRO 2200 boasts four distinct keys, making it the most essential Blink Marine keypad. It is highly resistant to weather and can survive extreme environments, making it perfect for installation outside driver cabs. The keys are large and well-spaced, allowing for a reliable pressure sensation even when wearing work gloves. Keypads in the PRO series are the only ones currently on the market that boast keys with removable inserts. The symbol on each PowerKey PRO 2200 key is laser-printed on a 24 mm insert (compatible with PKU 2400) that can easily be removed and substituted without needing to take apart the rest of the keypad or cockpit. The use of open protocols makes keypads in the PRO series perfect for both automotive and nautical markets.

AUTOMOTIVE - MARINE

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons• Full color LED indicators• 256 step brightness control for each color

• Significant power reductions, PKU2200 consumes with all LED’s active 250mA@12v• Overlay• Laser etch• Pad print• Hundreds of stock icons to choose from

SPECIFICATIONS FOR STANDARD KEYPADS

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

SOFTWARE FEATURES• Change CAN keypad addresse• Periodic status transmission• Heartbeat

• Event status transmission• LED acknowledgement• Address claim transmission• CANopen, J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

• Available in fixed legends

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS CANopen, J1939

MECHANICALConnector Deutsch DT04-4P, Molex 19418-0004, Micro-C and moreSwitch Life 3 million operationsMechanical Shock X, Y, Z 50Gs 11msVibration X,Y, Z 10 - 150Hz 0.15mm ampMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +85°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +72°C @ 4°C/MinHumidity 0 to 98% (no condensation)UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP68

16.5

0 m

m0.

64’’

MOUNTING STUD

≈ NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

12

34

RED=POWERBLACK=GROUND

BLUE=CAN LOWWHITE=CAN HIGH

99.00 mm3.89’’

99.0

0 m

m15

5.00

mm

22.3

8 m

m0.

88’’

6.10

’’

56.40 mm2.22’’

25.40 mm1’’

3.89

’’

POWERKEY PRO 2300


HARDWARE FEATURESIP67/NEMA6 rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour.

Waterproof – Totally protected against dust. Protected against the effect of immersion up to 1m.


Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.


AUTOMOTIVE - MARINE

PowerKey PRO 2300 is a compact keypad based on CAN protocol. It comes equipped with six keys with interchangeable, 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. LED lights in RGB colors and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously.



Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.




CANopen

J1939

BLUE=CAN LOW

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CUV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/NEMA6

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m0.

64’’

REF49.001.92’’

#10 - 32 STUDS

≈

STANDARD FEATURES

• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from


SOFTWARE FEATURES

• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS

• Programmer’s manual available to help support plug-and-play reconfigurability



123

456

RED=POWERBLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

21.0

0 m

m0.

82’’

185.

00 m

m7.

28’’

95.00 mm3.74’’

70.0

0 m

m2.

75’’

POWERKEY PRO 2400








AUTOMOTIVE - MARINE

PowerKey PRO 2400 is an evolution of the PowerKey PRO 2200, boasting large, well-spaced buttons that allow for a reliable pressure sensation even when wearing work gloves. It can be installed outside the driver’s cab, on vehicles or vessels where it is necessary to include more than four commands (up to a maximum of eight). Thanks to its IP68 input protection level, it is weather resistant and contin-ues to function even in extreme environments.Keypads in the PRO series are the only ones currently on the market that boast keys with removable inserts. The symbol on each Power-Key PRO 2400 key is laser-printed on a 24 mm insert (compatible with PKU 2200) that can easily be removed and substituted without needing to take apart the rest of the keypad or cockpit. The use of open protocols makes keypads in the PRO series perfect for both automotive and nautical markets.

SOFTWARE FEATURESCAN Keypad Addresses – Assign any valid CAN address to the keypad.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.





CANopen

J1939


MECHANICALConnector Deutsch DT04-4P, Molex 19418-0004, Micro-C and moreSwitch Life 3 million operationsMechanical Shock X, Y, Z 50Gs 11msVibration X,Y, Z 10 - 150Hz 0.15mm ampMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +85°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +72°C @ 4°C/MinHumidity 0 to 98% (no condensation)UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP68

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH (X

2)16

.30

mm

REF111.76

#10 - 32 STUDS

≈




SOFTWARE FEATURES• Change CAN keypad address• Periodic status transmission• Heartbeat






1234

5678



149.41 mm5.88’’

104.

20 m

m21

.00

mm

135.

00 m

m4.

10’’

0.82

’’ 5.

31’’

0.64

’’

4.40’’


CANopen

SOFTWARE FEATURESCAN Keypad Addresses – Assign any valid CAN address to the keypad.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.




PowerKey PRO 2600 is the most compact keypad Blink Marine produces: 12 small-size buttons make it perfect for anyone who needs to make the most of limited cockpit space, and is looking for a high density keypad. Like other Blink Marine keypads, the PowerKey PRO 2600 boasts IP68 input protection and can be installed outside the driver’s cockpit.Keypads in the PRO series are the only ones currently on the market that boast keys with removable inserts. The symbol on each Power-Key PRO 2600 key is laser-printed on a 15 mm insert that can easily be removed and substituted without needing to take apart the rest of the keypad or cockpit. The use of open protocols makes keypads in the PRO series perfect for both automotive and nautical markets.

POWERKEY PRO 2600








AUTOMOTIVE - MARINE

J1939



MECHANICALConnector Deutsch DT04-4P, Molex 19418-0004, Micro-C and moreSwitch Life 3 million operationsMechanical Shock X, Y, Z 50Gs 11msVibration X,Y, Z 10 - 150Hz 0.15mm ampMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +50°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +72°C @ 4° C/MinHumidity 0 to 98% (no condensation)UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP68

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.4

0 m

m

REF136.000.23’’

#10 - 32 STUDS

≈



SOFTWARE FEATURES• Change CAN keypad addresse• Periodic status transmission• Heartbeat








123456

789101112

186.05 mm7.32’’

78.6

5 m

m3.

09’’

135.

00 m

m

5.31

’’20

.71

mm

0.81

’’

powerkey pro 2200 · powerkey pro 2200 flexible - smart - rugged online set-up – an online set-up...

Documents