NEWSNEWS

Continued on page 3

Serving our membership since 1975 Vol. 18, Issue 4http://eastern-michigan.aspe.org

*American Society of Plumbing Engineers

American Society of Sanitary Engineering

DECEMBER 2014

From Bill Grayzar, CPDPresident of ASPE EMCPlumbing Design Classes

REGISTRATION REQUIREDRespond to EventBrite Invite at https://www.eventbrite.com/e/aspe-emc-december-2014-technical-program-registra-tion-14555450745or Contact Brianne Hall, VP Technical: (248) 324-4780 - bnhall@ftch.comSee inSide cover for table of contentS

DATETuesday, Dec. 16, 2014WHEREPlumbing Industry Training CenterSEE map on back page

MEETING BEGINS 4:30 PM - 5:30 PMPlumbing Venting Class Horizontal & Vertical Wet Vent

[Networking / Table Top Viewing]

DINNER 5:30 - 6:00 PMCost: ASPE, ASSE, MBPA Mbrs: NCNon-members: $18.00 FOR DINNER

DECEMBER TECHNICAL SESSIONS

Chapters are not authorized to speak for the Society.

December is here and the Christmas Holiday is approaching fast, as is the December 18th registration deadline to sign-up for the January 21st, 2014 “Contemporary Hydronics” seminar with Mr. John Siegenthaler, P.E., so don’t delay, get your registration form completed and sent to Mr. John Nussbaum at MCA Detroit today. Seminar information and registration form are included within this newsletter. Please note there will NOT be an electronic registration provided for this seminar.

I hope everyone enjoyed a wonderful Thanksgiving with family and friends. With November behind us and the holiday shopping spree in full swing, once again it’s time for the hunters to set aside their rifles and pull out the Christmas decorations.

During the Thanksgiving and Christmas Holidays it is always a time for reflection and giving thanks. In keeping with tradition, I would personally like to thank all of our local manufacturers’ representatives who continue to support ASPE EMC with donations and table top displays for our monthly meetings. I would also like to thank the chapter members, friends and affiliates who support the chapter by taking time out of their busy schedules to attend the monthly technical programs and seminars. I also thank all of the ASPE EMC board members who take the time and put forth the effort to keep our chapter running successfully. Because of all of you we have an exceptional chapter that is highly regarded by the National Society. I thank each and every one of you, and wish you the best this holiday season!

I would like to remind chapter members that this is your ASPE chapter and you are encouraged to voice any questions, comments or concerns you may have to any of the ASPE EMC board members. Your input helps the board to continue to provide the technical programs desired by you, our members, and to keep our chapter running smoothly. However, also remember to not only ask what ASPE EMC

can do for you, but also what can you do for ASPE EMC. Just in case you are not aware, as a member of the ASPE EMC chapter, you are welcome, and encouraged, to attend any of the board meetings or technical programs provided by the chapter. If you are interested in attending a board meeting, please note they are typically held every month one week in advance

6:00 - 7:00 PM TECH. SESSION [1]Topic: Emergency Fixtures, Design & Engineering

Speaker: Travis McKnight, Guardian Midwest, Regional Sales Manager, Chicago, IL

7:00 - 8:00 PM TECH. SESSION [2]Topic: Scald PreventionSpeaker: Ron George, CPD, President of Plumb-Tech Design & Consulting Services, LLC

During the Thanksgiving and Christmas Holidays it is always a

I would like to remind chapter members that this is your ASPE

December 2014 2

NOT ICES NOT ICES

HYDRONIC HEATING WITH JOHN SIEGENTHALER JANUARY 21ST AT 8:00 AM (SEE PG. 6)

NASPE RACES, BACK BY POPULAR DEMAND ON MARCH 10TH (SEE PG. 12)

ASSE AwArdS BAnquEt And AnnuAl MEEtingTo be held at the Shriners Conference Center, Southfield, MI. on Saturday, February 7, 2015 at 6:00 PM. Raffle tickets on sale soon for the John E. Matthews Scholarship Fund Raffle, with great prizes this year, contact a board member to get your tickets.

ASPE iS AccEPting APPlicAtionS for thE AlfrEd StEElE ScholArShiPThe Alfred Steele Scholarship has $3,000 in available monies for qualified applicants. It is limited to ASPE members and their immediate families who have a GPA of 3.0 or higher, who are enrolled in or plan to enroll in an engineering program at a college, university, or technical school on a full-time basis. Contact Stacey Kidd for more information at (847) 296-0002, or email skidd@aspe.org

PluMBing trAining cEntEr ASSE BAckflow rE-cErtificAtionWe’ll be giving an ASSE Backflow Re-Certification class to any member who is eligible. If you’re interested, please call the Training Center and get your name on the sign-up list for the next class training.

DECEMBER PROGRAM [1]EMERGENCY FIXTURES Design & Engineering

Speaker: Travis McKnight, Guardian Midwest Regional Sales Manager, Chicago, IL

Travis is currently with Guardian Equipment. As a representative of Guardian Equipment his duties include: a thorough understanding of all codes and standards relating to emergency showers and eyewashes,

engineering and architectural sales, and end user contacts. Affiliations include, American Society of Plumbing Engineers (2002- Present), Participated in ASSE Work Study GroupsPlan review: plumbing plan requirements, common problems, grease interceptors, piping and helpful tips.

The Emergency Fixtures, Design & Engineering presentation will cover: Occupational Safety & Health Administration and American National Standards Institute – general and specific guidelines and requirements - Understanding ANSI/ISEA Z358.1-2009 - Product categories and examples - Roles and responsibilities of a specifier/designer - Design challenges and solutions.

DECEMBER PROGRAM [2]SCALD PREVENTION

Speaker: Ron L. George, CPD, President Plumb-Tech Design & Consulting Services, LLC

He has over 32 years of experience designing plumbing and mechanical systems for several major architectural, engineering, and design & construction firms. He has served as an expert witness in many cases and performs

forensic investigations all around the United States. He has designed plumbing, mechanical, and fire protection systems for building types including airports, stadiums, industrial manufacturing facilities, office buildings, commercial and retail buildings, hospitals, laboratories, prisons, jails, hotels, apartment buildings, military projects, high rise and educational facilities. www.Plumb-Techllc.com and www.Legionellaprevention.org and www.scaldprevention.org.

The Scald Prevention presentation will cover the code requirements for domestic hot water systems and how to properly design and maintain domestic hot water systems to prevent scald injuries while at the same time minimizing the risk of Legionella bacteria growth.

January ProgramUnique Hydronic Details for Domestic Water HeatingSpeaker: John Siegenthaler, P.E.*This is a JOINT MEETING WITH ASPE EMC / ASHRAE*

Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Upcoming Programs . . . . . . . . . . . . . . . 2

Venting Sessions . . . . . . . . . . . . . . . . . . 3

V.P. Technical Report . . . . . . . . . . . . . . . 4

Consultant Report . . . . . . . . . . . . . . . . . 5

ChapterAffiliateLiaisonReport . . . . . . . 5

Hydronic Heating Seminar . . . . . . . . 6 - 7

November Attendees & Sponsors . . . . 10

NASPE Rules . . . . . . . . . . . . . . . 12 - 13

November Meeting Photos . . . . . 16 - 17

SponsorsListings . . . . . . . . . . . . . 18 - 19

3 ASPE News - Eastern Michigan Chapter

of the technical program. However, they are not held at the same location as the technical program they are held at MCA Detroit located on 8 Mile Road just east of Greenfield Road. If you have a desire to become more involved with ASPE EMC or just want to see what the ASPE EMC board actually does, feel free to attend a board meeting or two and see the efforts put forth by the board that keeps ASPE EMC in place as one of the best chapters in the National Society.

I look forward to seeing you, our ASPE EMC members, along with your guest at our upcoming meeting on December 16th, 2014 at the Plumbing Industry Training Center for our next venting class covering “Horizontal Wet Vent and Vertical Wet Vent” and Technical Programs on “Emergency Fixture Design & Engineering” and “Scald Prevention, The venting class is scheduled to begin at 4:30 PM and the Technical Sessions at 6:00 PM. Please remember to complete your online registrations and to sign-in and out of each class and technical session to obtain your CEU’s.

Warmest wishes to everyone for a very Merry Christmas and a Happy New Year!

Bill

President's Report (cont. from page 1) Bill Grayzar, CPD

SESSIONS ON VENTING EACH MONTH Speaker(s) Mike Melaragni and/or Paul Baker of the Plumbing Industry Training Center The Eastern Michigan Chapter of ASPE hosts a series of Plumbing Venting Design classes from 4:30 PM to 5:30 PM in addition to our technical program. These detailed step-by-step reviews, of the updated Chapter 9 Vents sec-tion of the 2012 Michigan Plumbing Code, are sure to provide details of interest to many plumbing profession-als. Required text: 2012 Michigan Plumbing Code and ASPE Data Book Volume 2 – current edition.

*** TAKE NOTICE***All Professional Engineers

and Certified Plumbing Designers

The above venting class held

monthly from 4:30 - 5:30 PM, with

instructor(s) Mike Melaragni and/or

Paul Baker can be counted towards

your professionally required REUs,

CEHs, and CEUs.

These one-hour venting classes

will run from October - May.

DESIGN CLASS INSTRUCTORMICHAEL MELARAGNI , CPDDirector, Metropolitan Plumbing Industry Training Center

DESIGN CLASS INSTRUCTORPAUL BAKERInstructor, Metropolitan Plumbing Industry Training Center

The Alfred Steele Scholarship has $3,000 in available monies for qualified applicants. Contact Stacey Kidd for more information at (847) 296-0002, or email skidd@aspe.org for more information.

ASPE IS ACCEPTING APPLICATIONS FOR THE ALFRED STEELE SCHOLARSHIP

For more info follow below linkhttp://aspe.org/sites/default/files/webfm/pdfs/CPD/CPDBulletin.pdfTHE 2015 ExAM DATES ARE APRIL 9-10, 2015. REGISTRA-TION WILL OPEN ON JANUARy 2, 2015. ONLINE REGISTRA-TION CLOSES MARCH 12, 2015.

December 2014 4

VP TechnicalBrianne Hall, P.E., LEED AP BD+C, CPD

Happy Holidays!

Thank you to the sponsors, instructors, speakers and those who attended our November meeting!

The evening started with our design class instructors, Mike Melaragni and Paul Baker, with the second design

class which reviewed Common Vents. The series will con-tinue at our next meeting, on December 16th, with the topic “Horizontal and Vertical Wet Vents”. Each design class pro-vides a valuable opportunity to expand your knowledge of vent design and the related Michigan Plumbing Code requirements.

The topic for our first hour of the November technical ses-sion was Commercial Kitchen Drainage. Our presenter, Joshua Nelson R.S., holds the position of Senior Public Health Sanitarian for the Oakland County Health Division.

During his presentation, one item reviewed was the plan review forms required by the Health Division for a new or renovated food service facility. These plan review forms require information such as plumbing cross-connection methods and hot water usage requirements. The hot water usage is calculated using a formula by MDARD (Michigan Dept. of Agriculture and Rural Development) to ensure that the water heater provides the minimum energy input and storage capacity required for the fixtures within the facility.

The Food Establishment Plan Review Worksheets for Oakland County can be found by following the link below:http://www.oakgov.com/health/Pages/info_pub/eh_food_planreview.aspx

The importance of backflow prevention and prevention of cross-connections was also discussed. Various methods of backflow prevention, ranked from highest to lowest, are: Air Gap, Reduced Pressure Principle Backflow Preventer (RPZ), Pressure Vacuum Breaker/Spill Proof Vacuum Breaker, Atmospheric Vacuum Breaker and Vented Double Check. Each method was reviewed citing the applicable ASSE stan-dard and types of equipment utilizing the various methods as well as installation requirements.

Several types of equipment were identified that do not require external backflow prevention due to acceptable internal air gaps. A few examples of these are: Bunn Coffee and Iced Tea Machines, Bloomfield Series 8500 Coffee Machine, Glasstender Dish Machine (GT-18, 20, 34). It is recommended to confirm with your local code official prior to proceeding without backflow prevention to ensure that the equipment is installed properly.

Additional Food Safety Resources can be found at the following link:http://www.oakgov.com/health/Pages/program_service/eh_food_relatedlinks.aspx

If you have any questions, please contact Mr. Nelson at (248) 424-7095 or nelsonj@oakgov.com.

Our second hour of the November technical session was led by speaker Calvin Rogler, Chief of the State of Michigan Elevator Safety Division. His discussion was on the recent Michigan Elevator Rule updates, which can be downloaded, free of charge, at the following link: http://www.michigan.gov/documents/lara/lara_bcc_eleva-tor_code_rules_2010_print_version_459311_7.pdf

One specific topic discussed was the requirement for oil separa-tors. This requirement is not found in the Michigan Elevator Rules; instead, the document references the Michigan Plumb-ing Code. In Section 1003.4 of the Michigan Plumbing Code an exception is allowed to provide an approved alarm system in lieu of an oil separator. The State of Michigan has now approved of two products which meet this exception:

1.) Stancor Oil Alarm Systems with Oil Separation Technology http://www.michigan.gov/documents/lara/lara_bcc_product_approval_1644pa_430226_7.pdf

2.) See Water Inc, Liquid Pump Systems Model OSSIM-30-OR and OSSIM-30-OR-2http://www.michigan.gov/documents/lara/lara_bcc_product_approval_1646pa_446077_7.pdf

Another notable discussion point, were the revisions to the Elevator Rules in July 2014, which included rescinding Rule 408.7035. Previously, this rule was amended Section 2.8.3.3 of the ASME A17.1 code requiring the fire protection sprinkler systems serving elevator hoist ways and machine rooms to have electronically supervised, accessible shut-off valves.

The July 2014 update rescinding Rule 408.7035 requires that elevator installations conform to ASME A17.1 Section 2.8.3.3, unamended. This removes the minimum requirement for elec-tronically supervised, accessible shut-off valves, however, they may still be provided based on individual owner requirements.

Any questions regarding the Michigan Elevator Rules shall be directed to Mr. Rogler at (517) 241-9337 or roglerc@michigan.gov.

Our December technical session will cover two topics, Emer-gency Fixtures and Scald Prevention. Additional information and registration for the Design Class on Venting and Technical Sessions can be found using the following link: https://www.eventbrite.com/e/aspe-emc-december-2014-tech-nical-program-registration-14555450745

Please contact me at bnhall@ftch.com or 248-324-4780 with any questions, suggestions or comments.

Continued on page 8

5 ASPE News - Eastern Michigan Chapter

Consultant ReportJohn Nussbaum, IPP, FASSE/ASPE

Prior to the ASSE Annual Meeting in Oklahoma City, the Michigan Chapter held its election for the 2015 officers & directors to the board. This was carried out by sending the membership an email ballot with a slate and a place for write in candidates to fill the positions. Out of 95 ballots sent out only a dozen replies

were received. This is sad, how in the world will new younger people with new ideas and direction reach you, the membership, if you fail to vote and bring them on board? What makes a good prospect for becoming an officer/director and leader, persons who are enthusiastic, knowledgeable and co-operative? You know these types of people; they are easily recognizable by their attitude and leadership skills. As your past presidents and the older members of the board are retiring and/or leaving, it is you the stake holders who are empowered to bring on the personnel changes needed to keep the chapter board vibrant and productive. The Michigan Chapter’s future rests with you, the membership. The elected Michigan Chapter 2015 Board of Officers & Directors are: Dennis Matthews, President; Esteban Cabello PE, Immediate Past President; John Nussbaum IPP, FASSE, Administrative

Secretary; Dennis Matthews, Treasurer; and Directors, Paul Baker CPP, Mark Fine, Ronald George CPD, Dann Holmes, Barry Pines CPD & CPP, William Weidendorf, CPP, Cindy Zatto, Paul Bladdick, FASSE, CPP (Honorary Member of the board) and News Letter Editor Theresa Green.

Michigan Chapter members of ASPE! You are commended for your ability in recognizing and electing those who possess the leadership qualities and skills needed to keep your board from becoming complacent, but rather keeping them enthusiastic, dedicated and forward thinking in caring out their duties as outlined in the ASPE Chapter Officers P & O manual. The 2014/2015 elected board of officers and directors has the desired makeup of the talented young as well as the experienced veterans of this industry and, it is a consensus group of the plumbing industry. This board is as good as any I have been part of from the past and is sure to leave its mark as one of the best going forward. I can honestly predict that there will be some future ASPE EMC leaders at the national board level including the presidency.

I wish all of you a Happy Holiday and/or Merry Christmas as we close out the year and begin a new year. ”Happy New Year!”

Chapter Affiliate/ Liaison ReportDann Holmes

We all have so much to be thankful for. Some of you are hunters and recently bagged your trophy deer; congratulations. Most of us spent quality time with our families and friends over this past Thanksgiving Day break. Some used a design tip they recently learned by attending their local ASPE Chapter meeting that got them through the final

stage of a plumbing design project.

I think it’s safe to say we’re all thankful for the last 4 years of dedicated service Jim Kendzel gave to ASPE. I was fortunate enough to speak with Jim at the recent PMI (Plumbing Manufacturers International) Fall Conference in Chicago, IL. We wish him the best in his new role as Vice President of Certification at the American Health Information Management Association. www.ahima.org.

The PMI Conference was well attended by many industry notables involved in the manufacturing of plumbing fixtures and/

or their components. As well as media and certification bodies.

The conference started with an Executive Panel Discussion featuring key representatives from Bradley, Delta Faucet, Kohler, Moen, Symmons, T&S Brass and TOTO. Bill Kurtis, acclaimed documentary host, producer and broadcaster moderated the event.

We also heard from PMI Consultants who closely monitor what legislative action is taking place in Washington D.C. and California. We know this will eventually affect each and every one of us. Be sure to read the many articles that are sure to populate your upcoming monthly plumbing magazines.

Not only was I thankful to have attended PMI but I was also equally fortunate to attend the PPI (Plastics Pipe Institute) Semi-Annual Meeting in Southlake, TX. It was here I learned about the many opportunities there are for plastic piping systems.

PPI has numerous divisions. There is the Building & Construction Division; they just completed the PEX Design Guide 2nd Edition. It’s available for download www.plasticpipe.org/publications/pex_handbook.html. Be sure to add this to your document library. It contains everything you’ve ever wanted to know about PEX, including things you’ve never thought of.

There is also the Conduit; Corrugated; Energy Piping Systems; Municipal & Industrial Divisions as well as the Technical

December 2014 6

John Siegenthaler, P.E. - John is a mechanical engineering graduate of Rensselaer Polytechnic Institute, a licensed professional engineer, and Pro-fessor Emeritus of Engineering Technology at Mohawk Valley Community College. “Siggy” has over 35 years of experience in designing modern hy-dronic heating systems. He is a hall-of-fame member of the Radiant Panel Association, and a presenter at national and international conferences on hydronic and radiant heating. John is principal of Appropriate Designs – a consulting engineering firm in Holland Patent, NY. The 3rd edition of his textbook - Modern Hydronic Heating was released in 2011. John currently writes about hydronics and heating system design using renewable energy heat sources for several trade publications including: Plumbing &Mechanical, PM Engineer, The NEWS, Supply House Times, and Heating, Plumbing, Air Conditioning (HPAC) in Canada.

CONTEMPORARY APPROACHES TO CONTEMPORARY APPROACHES TO CONTEMPORARY APPROACHES TO

HYDRONIC HEATINGHYDRONIC HEATINGHYDRONIC HEATING With John Siegenthaler P.E.With John Siegenthaler P.E.With John Siegenthaler P.E.

Topics:

Hydraulic Separation - Beyond Primary /

Secondary Pumping

Distribution Efficiency & Low Power Pumping

Low Temperature

Distribution Systems - The Future Of Hydronics

A Survey Of Mixing Options In Hydronic

Systems

Piping and Control Strategies for High Performance Wood-

Fired Heating Systems

Deadline

For Registration

12/18/2014 P R E S E N T S :

Wednesday, January 21, 2015 8:00 AM - 4:30 PM

Plumbing Industry

Training Center 1911 Ring Drive Troy, MI 48083

Continental Breakfast

& Lunch included

$149.00 per person

SPACE IS LIMITED

Pre-Registration and

Payment Necessary

CPD’s and P.E.’s

Earn up to 7 hours

of Continuing

Education Credit QUESTIONS? Contact John Nussbaum at (313) 341-7661 ext. 211

or email jnussbaum@mcadetroit.org

Supported by:

7 ASPE News - Eastern Michigan Chapter

Name

Company

Address

City State Zip

Email

Phone Fax

ASPE Eastern Michigan Chapter presents:

Contemporary Approaches to Hydronic Heating with John Siegenthaler P.E.

When : Wednesday, January 21, 2015 - 8:00 AM - 4:30 PM

Where: Plumbing Industry Training Center 1911 Ring Drive Troy, MI 48083 (248) 585-1435

Continental Breakfast & Lunch included: $149.00 per person

Registration Form: Contemporary Hydronics Seminar on January 21, 2015

Mail completed Registration Form and Check (made payable to ASPE Michigan Chapter) to:

ASPE HYDRONIC HEATING SEMINAR

14801 W 8 MILE RD. DETROIT, MI 48235 Fax: (313) 341-1007

THANK YOU!

QUESTIONS? Contact John Nussbaum at (313) 341-7661 ext. 211or email jnussbaum@mcadetroit.org

December 2014 8

Committee. PPI has produced a wealth of knowledge for you and it’s at your fingertips.

Do yourself a favor and bookmark the www.safeplumbing.org and www.plasticpipe.org websites and visit them often. They’re both a valuable resource for the plumbing industry.

We can all be thankful for the addition of a new Chapter in Region 2; the Toronto ASPE Chapter. I hope to give a full report on this in my article next month.

Let me leave you here with one last thing I’m thankful for; our upcoming Hanukkah, Christmas and New Year’s Holidays. No matter how you celebrate, be sure to reflect on your own personal accomplishments this past year before reaching out and sharing your good fortune with everyone around you. I’m starting out by sharing mine with you.

As always, please feel free to contact me at: Dann Holmes – ASPE Region 2 Affiliate Liaison NSF International – Business Unit Manager dholmes@nsf.org or (734) 214-6222

Chapter Affiliate Liaison (cont. from page 5) Dann Holmes

ACTION IS THE

FOUNDATIONALKEY

TO SUCCESS

Your Identity . Your Company

boost it

place your ad here

To find out more go to "ASPE.org/Fellows"

9 ASPE News - Eastern Michigan Chapter

32995 Industrial Road, Livonia, MI 48150 Phone 734.266.5300 Fax 734.266.5310 www.performanceengineering.com

High Efficiency Water Heaters High Efficiency Heating Boilers Custom System Solutions Storage Tanks

Heating Boilers Hot Water Supply Pool/Spa Heaters

Storage Tanks Complete Parts Stock

Snowmelt Systems Radiant Floorheat Systems

Residential Water Heaters Commercial Water Heaters Storage Tanks Complete Parts Stock

Natural Gas / Propane / Electric / Oil 3,000 to 4,000,000 BTU’s

- ALSO – Aldrich Boilers / Holby Valves / Valley Water Softeners

With new national lead-free legislation,

there’s been a lot of talk about making the switch.

Here’s the truth: T&S was the fi rst fi xture, faucet

and fi tting manufacturer to convert its entire line

to lead-free alloys back in 2010.

So when you purchase a T&S faucet, the peace of

mind that comes with lead-free compliance

is built right in. No worries. No hassle.

LEAD-FREE. WORRY-FREE. HASSLE-FREE.

www.tsbrass.com800.476.4103

Visit tsbrass.com/literature to download a free brochure about our

lead-free products, or contact your local T&S rep for more information.

T&S plumbing products represented in Eastern Michigan by: Diversifi ed Spec Sales - 248-398-2400

TSB-615 2014 Lead-Free ASPE Pubs.indd 4 1/28/14 11:50 AM

December 2014 10

Mike Kowalczyk Mark Lamberson CPDEric Leuenberger Mark Luczak Mike Melaragni CPD Dan McClary Sean McIntosh Danilo Nerida John Nussbaum IPP, FASSE, FASPE Gerald Potapa Paul Prentice Lydeen Ramirez Gary Taggart Mike Taggart Kyle Tevault Tad Zabinski Cindy Zatto Kyle Ziegler Tom Zimmerman

INDIVIDUALS

Paul Baker Amanda Belcher Adrienne Bennett Emily Birukow Vince Contrera Larry D'Ascenzo Robert Frey P.E. Rufina Golshteyn Bill Grayzar Brianne Hall P.E., CPD, LEED AP BD+C Pamela Hartsell CPD Edwin Hawley Dann Holmes James Hults George Johnston II Goran Kanevce Scott Knight Dale Koller Hank Koppelo CPD

SPONSORS Balfrey & JohnstonBell & GossettMajor Lozuaway and AssociatesTaggart-Knight GroupV.E. Sales

If you are interested in table top sposorship, please contact Pam Hartsell at (248) 399-1900 x 222

THANK YOU TO THE INDIVIDUALS AND SPONSORS WHO ATTENDED THE NOVEMBER 2014 MEETING OF THE ASPE EASTERN MICHIGAN CHAPTER!

11 ASPE News - Eastern Michigan Chapter

December 2014 12

13 ASPE News - Eastern Michigan Chapter

December 2014 14

• The Aurora Pump 3800 Series is a single stage end suction pump with a standard, stainless steel impeller making it a cost-effective solution for today’s liquid handling needs

• The 3800 boasts of superior efficiencies and increased application coverage with larger pump sizes, and the tougher, stainless steel impeller will last longer on the job no matter what liquid is applied.

• The 3800 comes into two models: the 3801 Close Coupled and the 3804 Flexible Couple-Frame Mounted with capacities up to 4200 G.P.M. (954 m3/hr), heads to 520 Feet (180 Meters) and temperatures to 300°F (149°C). Some of the additional features include four, larger power frame sizes allowing contractors and engineers to choose the 3800 for a wider variety of projects and applications. The variety of frame sizes ensures customers will find the ideal-size pump to handle the requirements of their specific.

• Many current industrial and commercial installations in eastern Michigan. Please inquire within Kerr Pump for additional details or assistance in a selection.

Aurora Pumps – 3800 Series End Suction pumps (Close and Flex Coupled)

FOR MORE DETAILS, TECHNICAL DATA, SPECIFICATIONS, Please go to http://www.aurorapump.com/

Michigan’s Oldest Supplier of Pumps and Process Equipment - 1905

316 Stainless Steel Impeller – Standard

To read the review go to the ASPE EMC Website under "what's new"

15 ASPE News - Eastern Michigan Chapter

For additional information on Apollo, Aquatherm, Highland Tank and MIRO products, please contact Cindy Zatto at 810.343.2713 or Cindyz@vesalesinc.com

December 2014 16

PHOTOS FROM NOVEMBER 2014 MEETING WITH SPEAKERS JOSH NELSON, R. S., SENIOR PUBLIC HEALTH SANITARIAN, OAKLAND COUNTY HEALTH DIVISION

ANDCALVIN ROGLER, CHIEF INSPECTOR, ELEVATOR SAFETY, DIVISION

EETINGS

H

Attendees

Patrick Michels

Josh Nelson

with Mark

Lamberson

Mark Lamberson and Calvin Rogler

17 ASPE News - Eastern Michigan Chapter

Sponsor R.L. Deppmann

Speaker Josh Nelson

Speaker Calvin RoglerSpeaker Calvin Rogler

December 2014 18

PERFORMANCE ENGINEERING GROUPEngineered Water Products

32955 Industrial Rd. Livonia, MI 48150

Alan Deal Ph 734 266-5300 Fax 734 266-5310 www.performanceengineering.com

DALE PRENTICE COMPANyManufacturers’ Representatives &

Application Engineering Solutions Provider 36511 Harding Avenue Oak Park, MI 48237

Michael Cullen Cell 248 302-5924 Ph 800 536-4700 Fax 248 339-5559

mcullen@prenticeco.com - www.prenticeco.com

MEEK / BECK & ASSOCIATES, INC.Manufactures’ Representatives

11875 Belden Court Livonia, MI 48150

Ross Beck Ph 734 458-2950 Fax 734 458-2953

meekandbeck@aol.com www.meekbeck.com

BURKE AGENCy, INC.Manufacturers’ Representatives

2605-A Oakley Park Road Walled Lake, MI 48390

Brian Burke, Tom Zimmerman, John Taylor Ph 248 669-2800 Fax 248 669-3310

bburke@burkeagency.com www.burkeagency.com

DAVE WATSON ASSOCIATES, INC.Manufacturers’ Representatives

1325 W. Beecher St. Adrian, MI 49221 Dave Watson, Jr.

Ph 517 263-8988 Fax 517 263-2328 dwa@davewatson.biz

DIVERSIFIED SPEC. SALES, INC./ HOWLEy AGENCy SALES CO.

Manufacturers’ Representative 13261 Northend Ave.

Oak Park, MI 48237-3265 Michael J. Burdette

Ph 248 398-2400 Fax 248 547-4905 www.diversifiedspec.com

MAJOR/LOZUAWAy & ASSOCIATES, INC.Manufacturers’ Representatives

1117 W. Grand Blanc Rd. Grand Blanc, MI 48439

Mike Ostrowski Wayne Phillpotts

Ph 810 234-1635 Fax 810 234-8389 moski@lozuaway.com

KERR PUMP AND SUPPLyManufacturers’ Representatives

12880 Cloverdale Oak Park, MI 48237

Chad Kundinger Ph 248 543-3880 Fax 248 543-3236

Mobile 734 812-9490 chad@kerrpump.com

QUALITy WATER & AIR, INC.Manufacturers’ Representative

1402 Souter Troy, MI 48083

Dawn Cole Ph 248 589-8010 Fax 248 589-8016

qualitywaterair@cs.com www.qualitywaterair.com

PLUMB-TECH DESIGN & CONSULTING SERVICES Plumbing-Piping-Fire Protection & HVAC System Design

Code & Standard Consulting - Forensic Investigations Litigation Support - CAD - Training Seminars - Tech. Writing

3525 N Dixie HWY, Monroe, MI 48162 Ron George, CPD, President

Ph 734 322-0225 Fax 734 322-2949 www.Plumb-TechLLC.com

HS/BUy VAN ASSOCIATES, INC.Manufacturers’ Representatives

56 S. Squirrel Auburn Hills, MI 48326

Jarrett Armstrong Bill Allen

Ph 888 472-8982 Fax 248 852-0298 info@hsbuyvan.com www.hsbuyvan.com

BALFREy & JOHNSTON, INC.Manufacturers’ Representatives

P.O.Box 37317 Oak Park, MI 48237 George D. Johnston

Ph 313 864-2800 Fax 313 864-7219 george@balfrey-johnston.com

www.balfrey-johnston.com

R.L. DEPPMANN COMPANyManufacturers’ Representatives

20929 Bridge Street Southfield, MI 48033

Chris Leider, Gerry Potapa Jr., CPD, Mark Fine LEED AP®, Paul Prentice, LEED AP®

Ph 800 589-6120 Fax 248 354-3763 sales@deppmann.com - www.deppmann.com

19 ASPE News - Eastern Michigan Chapter

TRO SALES COMPANyManufacturers’ Representatives

3406 West 12 Mile Road Berkley, MI 48072

Thomas R. Osberger Ph 248 546-5354 Fax 248 546-3513

tomr@trosales.com

TAGGART-KNIGHT GROUPManufactures’ Representatives

32985 Hamilton Court, Suite 102 Farmington Hills, MI 48334

Gary O. Taggart Ph 248 553-4388 Fax 248 553-4653

info@taggartco.com www.taggartknight.com

V. E. SALES COMPANyV. E. Sales is your source for

the finest quality flow control solutions.25200 Jefferson Ave.

St. Clair Shores, MI 48081 Thomas Van Egmond

Ph 586 774-7760 Fax 586 774-1490www.vesalesinc.com

expandYOUR COMPANYplace your ad here

AS AN ASPE MEMBER yOU CAN RECEIVE THE PIPELINE

PUBLICATION - ACCESS ARCHIVE EDITIONS AT

http://aspe.org/Pipeline

ASPE NEWSAmerican Society of Plumbing Engineers-Eastern Michigan Chapter

Theresa Green, Newsletter Editor MCA Detroit / tgreen@mcadetroit.org

Internet Address http://eastern-michigan.aspe.org

Region 2 - Great Lakes Eastern Michigan

Non-Profit Corporation Local Chapters Not Authorized To Speak For

The SocietyFirst Class Mail

ASPE EMC News is published 9 times per year (September through May, plus one summer issue if feasable). Yearly advertising rates are $150.00 per ad for members and $200.00 for non-members. One time digital full page insert advertisements are $250.00 for one issue, quarter page (9 issues) $250.00 - half page (9 issues) $350.00 - three quarter page (9 issues) $450.00 and full page (9 issues) $550.00. Please call Theresa Green for any questions regarding pricing of ads. Checks should be made payable to ASPE E. Mich. Chapter and mailed to the attention of Theresa Green at 14801 W 8 Mile Rd, Detroit, MI 48235. All newsletter digital inserts should be emailed to ASPE-EMC c/o Theresa Green. Circulation 400 - Distributed to: Engineers, Contractors, Inspectors, and other industry professionals in Michigan. For contributing articles contact Theresa Green, Newsletter Editor at: tgreen@mcadetroit.org.

December 2014 20

2014-2015 ASPE-EMC Board and Committee ChairpersonsPresidentWilliam Grayzar, CPD28105 Greenfield Rd.Southfield, MI 48076-0096(248)569-1430 ext.333bill@dsdonline.com

Vice President TechnicalBrianne Hall, P.E., LEED AP BD+C, CPDFTC&H39500 Mac Kenzie Dr. Suite 100

Novi MI 48377(248) 324-4780bnhall@ftch.com

Vice President Legislative (Imm. Past President)Joseph V. Hernandez, CPD 7360 Katrin DriveBloomfield, MI 48322(248) 539-7665joeh7360@yahoo.com

Vice President Membership Amanda Belcher, LEED-GA Strategic Energy Solutions 4000 W. Eleven Mile Rd. Berkley, MI 48072 (248) 399-1900 Fax 399-1901 amandab@sesnet.com

Treasurer Pamela Hartsell, CPD Strategic Energy Solutions 4000 W. Eleven Mile Rd. Berkley, MI 48072 (248) 399-1900 x 222 Fax: 399-1901 p_hartsell@yahoo.com

Administrative Secretary John Nussbaum, IPP, FASSE, FASPE MCA Detroit 14801 W. Eight Mile Road Detroit, MI 48235 (313) 341-7661 Fax: 341-1007 jnussbaum@mcadetroit.org

Corresponding Secretary George D. Johnston Balfrey & Johnston, Inc. P.O. Box 37317 Oak Park, MI 48237 (313) 864-2800 Fax: 864-7219 george@balfrey-johnston.com

Chaper Affiliate Liaison/ Dann Holmes NSF International 789 N. Dixboro Rd Ann Arbor, MI 48105 (248) 921-0582 dholmes@nsf.org

Map to the Plumbing Industry Training Center 1911 Ring Drive - Troy, MI West of and off John R, north of 14 Mile Rd.

75

E BIG BEAVER RD

E MAPLE RD

14 MILE RD

OAKLAND MALL

RING DRIVE

75

VP Education Mark Lamberson, CPD81190 Church Street, Memphis MI 48041-5401 (810) 392-5010 Mandr94@comcast.net

Board Member Cindy Zatto, FASSE V. E. Sales Company, Inc. 25200 Jefferson Ave. St. Clair Shores, MI 48081 (586) 774-7760 Fax: 774-1490 cindyz@vesalesinc.com

Board Member Michael Melaragni M.D.P.I.T.C. 1911 Ring Drive Troy, MI (313) 565-5580 Fax 565-9818

Board Member Esteban Cabello, PE, FASPE JRED Engineering, Inc. 5608 Charlesworth St. Dearborn Heights, Mi 48127 (313) 565-5580 Fax 565-9818

Chapter Historian Larry Keelan larrykeelan@comcast.net