picolino devices for musicians, technicans, djs
DESCRIPTION
PICOLINO Devices are high end sound stuff. it is all made in germany, PICOLINO is available as di box, attenuator, distortion, noise gate, limiter, impedance converter, phantom power....TRANSCRIPT
HighEnd sound stuff in pocket size.It is all broadcast standard.it is all made in Germany.It is the best you can get, ever!
DI Boxes
Isolationboxen
Impedance Converters
FX / Tools
...
16
DI Boxes
Isolationboxen
Impedance Converters
FX / Tools
...
DIs are commonly used to transfer a signal without degredation between source and mixing desk. They also help to get rid of nasty ground loops.
Why Picolino ? The small PICOLINO DI Boxes fit into any trouser pocket, Guitar or Keyboard case, are absolutely neutral in character and can handle very high levels. Take your Studio-sound with you on Stage.
PICOLINO DI Boxes: Universal application in the Studio or on Stage. Some models can be plugged directly into the stagebox.
Input connector: 6.3mm jack socket, unbalanced / Loop out: 6.3mm jack socket, unbalanced / Input impedance: 1 Mohm (-20dB Pad, 200Kohm) / Max input level: +10 dBv (-20 Pad, +30dBv) / Output connector: XLR 3pin male, balanced / Output impedance: 600 Ohm / Max Output level: +10dBv / Frequn-cy range: 20 Hz - 20 KHz +/- 0.2dB / THD: 0.01% (20 Hz - 20 KHz) / Powering via 48V phantom power / Dimensions: 31mm(H) x 26mm(W) x 106mm(L)
DI Boxes
Technical Data, DI Box active:
Order Number: PDI-A-L
Order Number: PDI-P-L
Order Number: PDI-P
DI Box activeJack socket 6.3mm (in + loop) <-> XLR 3pin male, long
DI Box passiveJack socket 6.3mm (in + loop) <-> XLR 3pin male, long
DI Box passiveJack socket 6.3mm (in + loop) <-> XLR 3pin male
17
18
Why attenuators ? They reduce strong signal sources to help avoid overloading the following inputs. Often used to match the high signal levels of pro-fessional equipment to acceptable levels for consumer gear such as DVD recorders or PC soundcards.
Order Number: PAM
Order Number: PA6
Order Number: PA9
Order Number: PA18
Order Number: PA30
Order Number: PAMIC
ATTENUATORS
Attenuator, switchable6dB, 9dB, 18dB, 30dBXLR female <-> XLR maleTechnical data in section A
Attenuator6dBXLR female <-> XLR maleTechnical data in section A
Attenuator9dBXLR female <-> XLR maleTechnical data in section A
Attenuator18dBXLR female <-> XLR maleTechnical data in section A
Attenuator30dBXLR female <-> XLR maleTechnical data in section A
Attenuator for microphones15dBXLR female <-> XLR maleTechnical data in section A
19
PICOLINO isolation boxes where specifically designed for use in the Studio and Live environment to provide a reliable transfer of signals from laptops or consumer gear and to avoid groundloops.
Even at home, PICOLINO isolation boxes are an indispensable tool for any ambitious music-lover to guarantee a noiseless connection between their PC,
ISOLATION BOXES
Order Number: PIB-2RCA-2RCA
Stereo, unbalanced2x phono(cinch) <-> 2x phono(cinch)Technical data in section A
Mono, unbalanced1x phono(cinch) <-> 1x phono(cinch)Technical data in section B
Mono, unbalancer1x XLR female <-> 1x phono(cinch)Technical data in section C
Stereo, unbalancedMini-jack socket, 3.5mm <-> 2x phono(cinch)Technical data in section A
Stereo, unbalancedMini-jack socket, 3.5mm <-> Mini-jack socket, 3.5mmTechnical data in section A
Mono, balancer1x XLR male, long <-> 1x phono(cinch)Technical data in section C
Order Number: PIB-RCA-RCA
Order Number: PIB-RCA-X3F
Order Number: PIB-MK-2RCA
Order Number: PIB-MK-MK
Order Number: PIB-RCA-X3M-L
20
Order Number: PIB-RCA-X3M
Order Number: PIB-X3F-X3M-L
Order Number: PIB-X3F-L-X3M
Order Number: PIB-X3F-X3M
Order Number: PIB-RCA-X3F-L
Technical Data:
Max input level: +28dBu (1KHz) +19dBu (40KHz)Frequency range: 10Hz - 20KHz (+/- 0.02dB)Phase L/R: 0.02‘Crosstalk: -95dBuOutput impedance: 150 Ohm
AMax input level: +28dBu (1KHz) +19dBu (40KHz)Frequency range: 10Hz - 20KHz (+/- 0.02dB)Output impedance: 150 Ohm
Max input level: +32dBu (1KHz) +25dBu (40KHz)Frequency range: 10Hz - 20KHz (+/- 0.02dB)Output impedance: 150 Ohm
B C
Mono, balancedXLR male, long <-> XLR femaleTechnical data in section C
Mono, balancerXLR male <-> phono(cinch)Technical data in section C
Mono, balancedXLR male <-> XLR female, long Technical data in section C
Mono, balancedXLR male <-> XLR femaleTechnical data in section C
Mono, unbalancerXLR male, long <-> 1x phono(cinch)Technical data in section C
21
PICOLINO AES impedance matchers are designed for balancing, unbalancing, and matching of digital audio signals. They can also be applied for the purpose of isolating signals. All matchers comply to AES specifications, are of broadcast quality, and can be used in the studio or for live applications as well. All connectors are Neutrik XLR and Damar&Hagen BNC components with gold plating.
APPLICATION: Impedance matching of digital audio signals - Conversion of balanced AES3/ 110 Ohm to unbalanced AESid or SPDIF 75 Ohm, or vice versa - Isolation of digital audio signals - sending signals over long cable runs - ability to use more affordable 75 Ohm cables for transfer of AES signals.
IMPEDANCE MATCHING
Order Number: IWP75-110
AES impedance matcherBNC <-> XLR maleConverts from 75 Ohm to 110 Ohm
AES impedance matcherPhono (cinch) <-> XLR male, longConverts from 75 Ohm to 110 Ohm
AES impedance matcherXLR female <-> BNCConverts from 110 Ohm to 75 Ohm
AES impedance matcherXLR female, long <-> BNCConverts from 110 Ohm to 75 Ohm
XLR female <-> BNC -12dB for AES3id
XLR female, long <-> BNC -12dB for AES3id
XLR female <-> BNC -18dB for SPDIF
XLR female, long <-> BNC -18dB for SPDIF
Order Number: IWP75-110-L
Order Number: IWP110-75
Order Number: IWP110-75-L
Order Number: IWP110-75-12
Order Number: IWP110-75-L-12
Order Number: IWP110-75-18
Order Number: IWP110-75-L-18
22
Impedance matching: 110 : 75 Ohm / 75 Ohm : 110 OhmTest voltage: 0.5 kV/ACCoupling capacitance: <20 pf- 11dB Pad for AES3id, plus- 18dB Pad for SPDIF (3.3v to 0.5v) availableMeasurements: H: 31mm, W: 26mm (Neutrik D-size), L: 50mmConnectors: 110 Ohm, Neutrik XLR, gold plated 75 Ohm: BNC Damar&Hagen, phono, gold plated
Technical Data:
Order Number: IWPC75-110
AES impedance matcherPhono (cinch) <-> XLR maleConverts from 75 Ohm to 110 Ohm
AES impedance matcherPhono (cinch) <-> XLR male, longConverts from 75 Ohm to 110 Ohm
AES impedance matcherXLR female <-> Phono (cinch)Converts from 110 Ohm to 75 Ohm
AES impedance matcherXLR female, long <-> Phono (cinch)Converts from 110 Ohm to 75 Ohm
XLR female <-> Phono (cinch) -12dB for AES3id
XLR female, long <-> Phono (cinch) -12dB for
XLR female <-> Phono (cinch) -18dB for SPDIF
XLR female, long <-> Phono (cinch) -18dB for
Order Number: IWPC75-110-L
Order Number: IWPC110-75
Order Number: IWPC110-75-L
Order Number: IWPC110-75-12
Bestellnr.: IWPC110-75-L-12
Order Number: IWPC110-75-18
Order Number: IWPC110-75-L-18
23
Super compact, finest components, perfect measurements – all that in the new PICOLINO distortion from KID Broadcast. It actually does what its sib-lings avoid perfectly. It distorts and cranks without mercy, which is the whole purpose of distortion after all. The really cool thing about the PICOLINO dis-tortion is: When not using it as a distortion and you’re in need of a DI, it also doubles up as a DI box which your PICOLINO distortion will do with pleasure.
Input: 6,3mm Jacksocket, unbalancedLoop Out (undistorted), Jacksocket, unbalancedInputsimpedance: 1 MOhmDrive, EQ and Output Gain adjustable by Trim potBypass-Schalter zur Verwendung des Distortion als DI-BoxOutput: XLR extended Plug, 3 pin, balanced.Powered by 48V Phantom power
Input: XLR Socket, 3 pin, balancedInput impedance: 10k OhmAdjustable Treshold via TrimpotOutput: XLR extended Plug, 3 pin, balanced. Can be plugged directly into stagebox or deskPowered by 48V Phantompower
Input: XLR Socket, 3 pin, balancedInput impedance: 10k OhmAdjustable Treshold via TrimpotOutput: XLR extended Plug, 3 pin, balanced. Can be plugged directly into stagebox or deskPowered by 48V Phantompower
The PICOLINO Series from KID Broadcast welcomes a new addition. Isn’t that nice ? :-) You can admire the newest Picolino at the Frankfurt Musikmes-se, where we will be presenting all the latest Picolino products. The Picolino Limiter limits the level of analogue line or mic signals. It prevents overloading the attached equipment by cutting the peak levels. The Threshold, or level at which the Limiter comes in, is adjustable by a trim pot. The Limiter is po-wered by Phantompower of the desk, so no further power supply is required. The Limiter has the same superior sound quality as all the other products in the Picolino series.
The Picolino Noisegate switches a signal to “silent” once the level has gone below a selected threshold. One ideal example is to use it used in-line with a microphone in order to automatically mute the signal when the speaker pauses. The threshold is adjustable by trim pot. The Gate is powered by Phan-tompower of the desk, so no further power supply is required.
Distortion
Limiter
Noise Gate
Bestellnr.: K-PDIS
Bestellnr.: K-PL
Bestellnr.: K-PG
DI DistortionKlinke 6,3mm (Loop Out) <-> XLR male lang
LimiterXLR female <-> XLR male lang
GateXLR female <-> XLR male lang
Technical Data
Technical Data
Technical Data
24
25
