part vii deepwater drilling
TRANSCRIPT
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 1/31
Advanced Mud School
Part VII Deepwater Drilling
Presented By:
Jeff Imrie
August 2006
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 2/31
PFM
Deepwater Drilling
• Deepwater exploration and productionhave significant potential in manyoffshore locations around the world.
• Deepwater drilling, in general, has a greater degree of difficulty than
conventional drilling and presents manyoperational challenges.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 3/31
PFM
Deepwater Drilling
• Deepwater Drilling – Greater than 1500ft of water
– use of either dynamically positioned or chain-
anchored floating rigs of either thesemisubmersible or drillship design, using subseawellheads and long riser systems
– The wells are drilled in younger formations thathave narrower fracture- radient to- pore-pressureprofiles, requiring more casing strings andexhibiting high operating costs.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 4/31
PFM
Deepwater Drilling
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 5/31
PFM
Deepwater Drilling
• A list of fluid design issues and considerationsincludes:
– Gas hydrates.
– Geology/reactive formations. – Pore pressure and low fracture gradients.
– Riser volumes/large-casing well designs/logistics.
– Lost circulation.
– Low flow line temperatures.
– Hole cleaning.
– Well control.
– High daily rig costs.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 6/31
PFM
Deepwater Drilling – Mud Systems
• Many different mud systems can andhave been used in deepwaterapplications.
– They range from systems as simple as
seawater-base lignosulfonate muds to
environmentally approved high-
performance synthetic muds.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 7/31
PFM
Deepwater Drilling – Gas Hydrates
• Gas hydrates are an “ice-like” mixture of gas and water. At atmospheric pressure, freshwater freezes at 32°F (0°C).
– At high pressures, gas hydrates will format moderate temperatures — even as highas room temperature.
– Gas hydrates occur naturally in arcticpermafrost and deepwater seabeddeposits, usually at depths greater than
800 ft.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 8/31
PFM
Deepwater Drilling
• One cubic foot of gas hydrates cancontain 170 ft3 of natural gas.
– Naturally occurring gas hydrates can pose
a well-control problem when drilled, but
gas hydrate formation in the drilling fluid is
a more significant well-control problem in
deepwater situations.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 9/31
PFM
Deepwater Drilling – Gas Hydrates
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 10/31
PFM
Deepwater Drilling – Gas Hydrates
• Gas hydrates can form in low-salinitydrilling muds under pressure/temperatureconditions as mild as 480 psi and 45°F
(7.2°C), conditions which are commonwhen controlling kicks in deep water.
• During well-control situations, hydratescan plug risers, BOP lines and choke-and-kill lines, interfering with effective well
control.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 11/31
PFM
Deepwater Drilling – Gas Hydrates
• Reported cases of gas hydrates are few,the risk of losing the ability to operateBOP equipment adequately is always
present.
– For this reason, all deepwater mud
systems must be formulated to suppress
the formation of gas hydrates.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 12/31
PFM
Deepwater Drilling – Gas Hydrates
• Increasing the salinity of water-basemuds is the common method used tosuppress hydrates.
– The standard deepwater water-base mudsystem uses 20% by weight salt to inhibitgas hydrates.
– Increasing the salinity of a water-basemud system will reduce the temperature atwhich gas hydrates can form at a given
pressure.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 13/31
PFM
Deepwater Drilling – Gas Hydrates
– The amount of salt required depends onboth hydrostatic and shut-in pressures
and the seafloor temperature
– At higher pressures and coldertemperatures, a combination of salt and
either glycerol or water-soluble glycol is
recommended for greater inhibition.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 14/31
PFM
Deepwater Drilling – Gas Hydrates
• Diesel oil, mineral oil and syntheticsystems all provide excellent hydratesuppression.
– This inhibition is a result of the limited
amount of water contained in them and
the fact that the water phase generally has
a high concentration (>25% wt) of calcium
chloride.
– Dissolved gasses can reduce suppresion
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 15/31
PFM
Deepwater Drilling – Borehole Stability
• The geology of deepwater drilling isdifferent from that on land and inshallow water.
– The formations, for example, are relatively
young and very reactive.
– The clays and silts have not been alteredby extreme heat or pressure and are not
significantly dewatered.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 16/31
PFM
Deepwater Drilling – Borehole Stability
• Sands are often unconsolidated and have notbeen compacted.
• Shallow clay formations, referred to as gumbo,are very soft and sticky.
• Cuttings from these formations can cause hole packoff, plugged flow lines, balling of bit andbottom-hole assembly, and reduced Rate of
Penetrations (ROPs).• Young clays contain high volumes of water and
can be extremely sticky and problematic
regardless of the degree of inhibition.
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 17/31
PFM
Deepwater Drilling – Borehole Stability
• Swelling and dispersion of the reactiveshale must be addressed when drilling indeep water.
– Synthetic, diesel, mineral, PHPA,enhanced chloride and lignosulfonatesystems all have been used in deepwater
applications. – Synthetic and oil-base muds provide
excellent inhibition, virtually eliminate
problems with gumbo
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 18/31
PFM
Deepwater Drilling – Borehole Stability
• Water-base systems will requireadditives to increase performance and tominimize trouble with soft, sticky gumbo
and for hydrate inhibition. – Amines
– Glycols – PHPA
– Silicate
– KCL
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 19/31
PFM
Deepwater Drilling –
Low Fracture Gradients
• In deepwater drilling, challenges existthat are related to formation pore
pressures and fracture gradients being
very close at shallow depths.
• For deepwater applications, the fracture
gradient and equivalent pore pressuredecrease as water depth increases.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 20/31
PFM
Deepwater Drilling –
Low Fracture Gradients
• At extreme water depths (±10,000 ft), thislow fracture gradient (due to the lack ofoverburden) and low equivalent pore
pressure make drilling impractical, evenwith unweighted mud, due to annular
pressure losses increasing the EquivalentCirculating Density (ECD).
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 21/31
PFM
Deepwater Drilling –
Low Fracture Gradients
• The typical deepwater well uses frequentshallow casing strings to seal off low
fracture- gradient formations.
• The low fracture gradients also presentlost circulation problems from both surgeand swab pressures.
• This is especially true with synthetic,mineral oil and diesel systems, which arecompressible and tend to reduce the
allowable fracture gradients
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 22/31
PFM
Deepwater Drilling –
Low Fracture Gradients
• Surge, swab and ECD pressures are asignificant concern for all deepwaterdrilling operations, particularly while
running and cementing casing.• Understanding the effects of temperature
and pressure on hydraulics and drilling fluid rheology is very important indeepwater
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 23/31
PFM
Deepwater Drilling –
Low Fracture Gradients
• Low water temperatures and theresulting low riser temperatures canresult in elevated fluid rheology and high
surge and swab pressures.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 24/31
PFM
Deepwater Drilling – Large Mud Volumes
• Wells drilled in deep water require long risersand large diameter casing strings.
– The riser, large-diameter casing and large holesizes call for large mud system volumes.
– A 20-in. ID riser in 2,500 ft of water has a volumeof 972 bbl.
– It is not uncommon for a deepwater drilling
operation to have a circulating system of 4,000 bblor more.
– These large systems require proportionatelylarger quantities of mud additives for maintenance
and treating.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 25/31
PFM
Deepwater Drilling – Large Mud Volumes
• Logistics – Inventory management is critical
– Delivery time
– Sea conditions – Changing hole conditions
• Considerations
– Bulk bags (1 ton or more)
– Floating liquid storage for brines
– Bulk handling systems
– Proper estimates
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 26/31
PFM
Deepwater Drilling –
Low Flow Line Temperatures
• As explained earlier, water temperaturedecreases with depth.
• Long risers surrounded by cold sea waterwill result in much colder mudtemperatures and higher vicosities in the
riser and at the flow line.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 27/31
PFM
Deepwater Drilling –
Low Flow Line Temperatures
• The increased viscosity from temperature, particularly in oilbase and syntheticmuds, may limit the shale shaker screens
which can be used without losing mud torelatively large mesh sizes.
• Often, there is a temptation to treat the
mud system to reduce the viscosity at the flow line, but this should be avoided,since it will reduce hole cleaning in the
riser.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 28/31
PFM
Deepwater Drilling –
Low Flow Line Temperatures
• Circulating a third “boost” mud pump onthe riser will limit the amount of coolingthat occurs in it.
• A Fann Model 70 HTHP viscometer canbe used to provide a more accurate profile
of the effects of cold and hot temperaturesand pressures on a particular mud.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 29/31
Deepwater Drilling – High Rig Costs
• The practices of drilling and completingwells in deep water are high-costoperations.
• Optimization can be achieved through proper, coordinated planning and
implementation of all of the relatedefforts on a deepwater project to reducecost and maximize productivity.
PFM
8/10/2019 Part VII Deepwater Drilling
http://slidepdf.com/reader/full/part-vii-deepwater-drilling 30/31
Deepwater Drilling – High Rig Costs
• A low-cost approach to fluids is not always thecorrect approach for deepwater projects.
– Any drilling fluid system or process that can help
reduce the time required to reach the operator’sobjectives should be considered, regardless of
cost.
– The cost of a high-performance mud system can
be offset easily by the savings in rig cost realizedby reducing the number of days required to
complete the project.
PFM