oxigen gen container cmm 35-21-14

B/E Aerospace Systems GmbHRevalstraße 1

D - 23560 LÜBECKGERMANY

Phone: #49 / 451 / 4093 2976Fax: #49 / 451 / 4093 4488

D1379

COMPONENT MAINTENANCE MANUALWITH

ILLUSTRATED PARTS LIST

35-21-14FIRST ISSUE: Nov 01/2001Revision: 4

Chemical Oxygen Container Assembly

Type VI (15 / 22 / 36 Min.)

Part Number

6XC1505B0XX0005 SERIES 6XC1506D0XX0005 SERIES6XC15H6D0XX0005 SERIES 6XC15H6N0XX0005 SERIES6XC1506K0XX0005 SERIES 6XC1505Q0XX0005 SERIES

6XC1505B0XX0006 SERIES 6XC1506D0XX0006 SERIES6XC15H6D0XX0006 SERIES 6XC15H6N0XX0006 SERIES6XC1506K0XX0006 SERIES 6XC1505Q0XX0006 SERIES64C15M6N0XX0006 SERIES 64C15M380XX0006 SERIES

6XC2205B0XX0005 SERIES 6XC22H6D0XX0005 SERIES6XC2206D0XX0005 SERIES 6XC22H6N0XX0005 SERIES6XC2205Q0XX0005 SERIES 6XC2206K0XX0005 SERIES

TPNov 15/2012

TP 2Nov 15/201235-21-14

Chemical Oxygen Container Assembly

Type VI (15 / 22 / 36 Min.)

Part Number

6XC2205B0XX0006 SERIES 6XC22H2C0XX0006 SERIES6XC22H6D0XX0006 SERIES 6XC22H6N0XX0006 SERIES6XC2206D0XX0006 SERIES 6XC2205Q0XX0006 SERIES6XC2206K0XX0006 SERIES 64C22M6N0XX0006 SERIES64C22M310XX0006 SERIES 64C22M380XX0006 SERIES

6XC3605B0XX0006 SERIES 6XC36H6D0XX0006 SERIES6XC36H6N0XX0006 SERIES 6XC3605Q0XX0006 SERIES

COMPONENT MAINTENANCE MANUAL6XC15 / 6XC22 / 6XC36 Series

35-21-14

HIGHLIGHTS

TO HOLDERS OF: CHEMICAL OXYGEN CONTAINER ASSEMBLY

PART NUMBER: 6XC15 - 6XC22 - 6XC36 Series

COMPONENT MAINTENANCE MANUAL: 35-21-14

REVISION No.: 4 DATED: Nov 15/2015

This manual has been revised in order to incorporate a revised page header Logo and new Oxygen Mask Assemblies.

This is a complete revision. Due to the extent of the changes involved in this revision this publication has been reprinted in its entirety.

Please replace all prior existing issues by this new issue of CMM (Rev. No. 4, dated: Nov 15/2012).

HighlightsNov 15/2012

THIS PAGE INTENTIONALLY LEFT BLANK


35-21-14

RECORD OF REVISIONS

REV.No.

ISSUEDATE

INSERTED REV.No.

ISSUEDATE

INSERTED

DATE BY DATE BY1 Nov 01/2003 Nov 01/2003 DAe2 Jan 01/2009 Jan 01/2009 DAe3 Apr 01/2010 Apr 01/2010 B/E4 Nov 15/2012 Nov 15/2012 B/E

ROR Page 1Nov 15/2012


35-21-14

RECORD OF TEMPORARY REVISIONSTEMP.REV.No.

ISSUEDATE

INSERTED REMOVEDPAGE

DATE BY DATE BY

ROTR Page 1Nov 15/2012


35-21-14

SERVICE BULLETIN LIST

SB / AEBREV

INCLUDEDIN

REVISION

DATEOF

INCORPORATIONTITLE

SBL Page 1Nov 15/2012


35-21-14

LIST OF EFFECTIVE PAGES

Subject Page DateTitle Page TP R NOV 15/2012(TP) TP 2 R NOV 15/2012

Record of Revision(ROR)

1 R2 R

NOV 15/2012BLANK

Record of Temporary Revision (ROTR)

1 R2 R

NOV 15/2012BLANK

Service Bulletin List(SBL)

1 R2 R

NOV 15/2012BLANK

List Effective Pages(LEP)

1 R2 R

NOV 15/2012NOV 15/2012

Table of Contents(TOC)

1 R2 R

NOV 15/2012NOV 15/2012

Introduction(INTRO)

1 R2 R

NOV 15/2012NOV 15/2012

Description and Operation

1 R2 R

NOV 15/2012NOV 15/2012

3 R NOV 15/20124 R NOV 15/20125 R NOV 15/20126 R NOV 15/20127 R NOV 15/20128 R NOV 15/20129 R NOV 15/2012

10 R NOV 15/2012

Testing and Fault Isolation

1001 R1002 R

NOV 15/2012NOV 15/2012

1003 R NOV 15/20121004 R NOV 15/20121005 R NOV 15/20121006 R NOV 15/20121007 R NOV 15/20121008 R NOV 15/2012

Schematics and Wiring Diagrams

2001 R2002 R

NOV 15/2012BLANK

Disassembly 3001 R NOV 15/2012

Disassembly 3002 R NOV 15/20123003 R NOV 15/20123004 R NOV 15/20123005 R NOV 15/20123006 R BLANK

Cleaning 4001 R NOV 15/20124002 R NOV 15/2012

Check 5001 R NOV 15/20125002 R NOV 15/2012

Repair 6001 R NOV 15/20126002 R BLANK

Assembly 7001 R NOV 15/20127002 R NOV 15/20127003 R NOV 15/20127004 R NOV 15/20127005 R NOV 15/20127006 R NOV 15/20127007 R NOV 15/20127008 R NOV 15/20127009 R NOV 15/20127010 R NOV 15/20127011 R NOV 15/20127012 R NOV 15/20127013 R NOV 15/20127014 R NOV 15/20127015 R NOV 15/20127016 R NOV 15/20127017 R NOV 15/20127018 R NOV 15/2012

Special Tools and Fixtures

9001 R9002 R

NOV 15/2012NOV 15/2012

Illustrated Parts List TP 10001 R NOV 15/2012TP 10002 R BLANK

IPL Intro INTRO -1 R NOV 15/2012

Subject Page Date

LEP Page 1Nov 15/2012

LEP Page 2Nov 15/2012


35-21-14

LIST OF EFFECTIVE PAGES

INTRO -2 R NOV 15/2012INTRO -3 R NOV 15/2012INTRO -4 R NOV 15/2012INTRO -5 R NOV 15/2012INTRO -6 R NOV 15/2012INTRO -7 R NOV 15/2012INTRO -8 R BLANK

NI/Alpha 1 R NOV 15/20122 R NOV 15/20123 R NOV 15/20124 R NOV 15/20125 R NOV 15/20126 R NOV 15/20127 N NOV 15/20128 N BLANK

NI/Num 1 R NOV 15/20122 R NOV 15/20123 R NOV 15/20124 R NOV 15/20125 R NOV 15/20126 R NOV 15/2012

Detailed Parts List DPL R NOV 15/201210001 -0 R NOV 15/201210001 -1 R NOV 15/201210001 -2 R NOV 15/201210001 -3 R NOV 15/201210001 -4 N NOV 15/201210001 -5 N NOV 15/2012

10001A-0 R NOV 15/201210001A-1 R NOV 15/201210001A-2 R NOV 15/201210001A-3 R NOV 15/201210001A-4 N NOV 15/201210001A-5 N BLANK10001B-0 R NOV 15/201210001B-1 R NOV 15/201210001B-2 R NOV 15/201210001B-3 R NOV 15/201210001B-4 R NOV 15/201210001B-5 R NOV 15/201210001C-0 R NOV 15/2012

Subject Page Date10001C-1 R NOV 15/201210001C-2 R NOV 15/201210001C-3 R NOV 15/201210001C-4 R NOV 15/201210001C-5 R NOV 15/201210001C-6 N NOV 15/201210001C-7 N BLANK10001D-0 R NOV 15/201210001D-1 R NOV 15/201210001D-2 R NOV 15/201210001D-3 R NOV 15/201210001D-4 N NOV 15/201210001D-5 N NOV 15/201210001E-0 R NOV 15/201210001E-1 R NOV 15/201210001E-2 R NOV 15/201210001E-3 R NOV 15/201210001E-4 R NOV 15/201210001E-5 R NOV 15/201210001E-6 N NOV 15/201210001E-7 N BLANK10001F-0 R NOV 15/201210001F-1 R NOV 15/201210001F-2 R NOV 15/201210001F-3 R NOV 15/201210001G-0 R NOV 15/201210001G-1 R NOV 15/201210001G-2 R NOV 15/201210001G-3 R NOV 15/201210002 -0 R NOV 15/201210002 -1 R NOV 15/201210002 -2 R NOV 15/2012

Special Procedures 11001 R NOV 15/201211002 R NOV 15/201211003 R NOV 15/201211004 R NOV 15/2012

Storage 15001 R NOV 15/201215002 R NOV 15/201215003 R NOV 15/201215004 R NOV 15/2012

Subject Page Date


35-21-14

TABLE OF CONTENTS

Subject Page

INTRODUCTION INTRO 1

DESCRIPTION AND OPERATION 11. Chemical Oxygen Container Assembly Description and Operation 1

TESTING AND FAULT ISOLATION 10011. Test of the Chemical Oxygen Container Assembly 10012. Chemical Oxygen Container Assy Fault Isolation 1008

SCHEMATIC AND WIRING DIAGRAMS 20011. Wiring Diagram 2001

DISASSEMBLY 30011. Disassembly of the Chemical Oxygen Container Assy 3001

CLEANING 40011. Cleaning of the Chemical Oxygen Container Assembly 4001

INSPECTION/CHECK 50011. Cleaning of the Chemical Oxygen Container Assembly 5001

REPAIR 60011. Repair of the Oxygen Container 6001

ASSEMBLY 70011. Assembly of the Chemical Oxygen Container Assy 7001

FITS AND CLEARANCES NOT APPLICABLE

SPECIAL TOOLS, FIXTURES. EQUIPMENT AND CONSUMABLES 90011. Special Tools, Fixtures and Equipment 90012. Consumables 9001

ILLUSTRATED PARTS LIST 100011. General INTRO IPL 12. Introduction INTRO IPL 1

B. Alpha/Numerical Index INTRO IPL 1C. Detailed Parts List INTRO IPL 1D. How to use the Illustrated Parts List INTRO IPL 6

3. Numerical Index / Alpha NI/ALPH 14. Numerical Index / Numerical NI/NUM 15. Detailed Parts List TP 10001

A. IPL-Figure 1 (15 Min., 2, 3 and 4 masks, Version -0005) 10001-0B. IPL-Figure 1A (15 Min., 4 (64C15M..), 5 and 6 masks, Version -0005/-0006) 10001A-0C. IPL-Figure 1B (22 Min., 2 to 4 masks, Version -0005) 10001B-0D. IPL-Figure 1C (22 Min., 4 (64C22M..), 5 and 6 masks, Version -0005/-0006) 10001C-0E. IPL-Figure 1D (15 Min., 2 to 4 masks, Version -0006) 10001D-0F. IPL-Figure 1E (22 Min., 2 to 4 masks, Version -0006) 10001E-0G. IPL-Figure 1F (36 Min., 2 and 3 masks, Version -0006) 10001F-0H. IPL-Figure 1G (36 Min., 4 and 5 masks, Version -0006) 10001G-0I. IPL-Figure 2 (Container Assy) 10002 -0

TOC Page 1Nov 15/2012

TOC Page 2Nov 15/2012


35-21-14

TABLE OF CONTENTSSubject Page

SPECIAL PROCEDURES 110011. Unpacking and Preparation before Installation on Aircraft 110012. Handling Procedure how to discard a not used Chemical Oxygen Generator 11003

REMOVAL NOT APPLICABLEINSTALLATION NOT APPLICABLESERVICING NOT APPLICABLE

STORAGE (INCLUDING TRANSPORTATION) 150011. Storage and Shipping Instructions 15001

INTRO PAGE 1Nov 15/201235-21-14


INTRODUCTION

1. General

A. This manual is written to the ATA Specification 100 and in Simplified English.SI units of measurement are used in this manual, Imperial units in parentheses.

B. The manual describes maintenance on the component in a workshop. It does not describe mainte-nance on the component when it is installed in the aircraft.

C. Only approved persons with the necessary skills must be used for the maintenance procedures described in this manual.

D. Maintenance Task Oriented Support System (MTOSS) task and subtask identification is used in this manual. The maintenance tasks and other data have special MTOSS numbers for the use of Electronic Data Processing (EDP). The MTOSS numbers can be ignored by the user of the manual.

E. This manual contains:

• Technical data for the component• Maintenance and repair procedures for the component• An Illustrated Parts List (IPL) with the data for the component parts.

Parts are identified in all sections by the IPL Figure and Item number.

F. We verified the DISASSEMBLY, TESTING AND FAULT ISOLATION and ASSEMBLY procedures by actual performance.

2. How to Use the Manual

A. Make sure the manual contains the information applicable to your component. Look on the Title Page for the part number (PNR).

B. If you need to identify a part or find a PNR, refer to the IPL which has an introduction to show the procedure.

C. The instruction in this manual must be used for all the component maintenance. Read all the applicable WARNINGS and CAUTIONS before you do the work on the component.

3. Associated Publications

Not applicable

INTRO PAGE 2Nov 15/201235-21-14


4. List of Abbreviations

A = AmpereAC = Alternate Currentacc. = accordinga.m. = above mentionedoC = degree CelsiusdaN = deka NewtonDPL = Detailed Parts Liste.g. = (exempli gratia) for exampleetc = et cetera (and so on)oF = degree FahrenheitHz = Hertzin. = inchINTRO = IntroductionIPL = Illustrated Parts Listkg = kilogramlb = poundlbf = pound-forceLEP = List of Effective PagesLH = Left-HandmA = milli-Amperemax. = maximummin. = minimummm = millimeterQTY = QuantityRef. = ReferPNR = Part NumberRH = Right-HandROR = Record of RevisionsROTR = Record of Temporary RevisionsSBL = Service Bulletin ListTOC = Table of ContentsTP = Title PageV = Volt

Nov 15/201235-21-14


DESCRIPTION AND OPERATION

TASK 35-21-14-870-801-A011. Chemical Oxygen Container Assembly Description and Operation

Subtask 35-21-14-870-001-A01A. General

The two to six mask CHEMICAL OXYGEN CONTAINER ASSEMBLIES (referred to as theOXYGEN CONTAINER) specified in this manual are used in passenger aircraft which havepressurized cabins. They supply the passengers with the necessary quantity of oxygen duringemergency (accidental loss of the cabin pressure in a high flight altitude).

Subtask 35-21-14-870-002-A01B. Technical Data

Electrical Data:

Operating Voltage 115 VAC / 400 Hz

Current Consumption max. 96 mA

Electrical ConnectionsContact pins per NSA937910EA2000(Two pins made from copper alloy and gold-plated) or NAS1749-20Cable Type acc. to ASN-E0261

Operating Medium: chemically generated gaseous oxygen

Duration of Oxygen Generation:

6XC15 - Series min. 15 minutes6XC22 - Series min. 22 minutes6XC36 - Series min. 36 minutes

Useful Life of the O2 Generator15 years)

Quantity of O2 Generators / Container Assy

Qtyof

Masks

O2 Generator (15/22/36 Min.)

Qty Type Qty Type

2 1 2 person -- --

3 1 3 person -- --

4 1 4 person (15/22 Min. only) -- --

4 2 2 person (15/22 Min. only) -- --

4 2 2 person (36 Min. only) -- --

5 1 2 person 1 3 person

6 1 2 person 1 4 person

Nov 15/201235-21-14


Operating Temperature Range: -15o to +55o C (+5o to +131o F)

Dimensions:

Length 600,0 mm (23.62 in.)

Width 203,0 mm (7.99 in.)

Height max. 80,0 mm (3.15 in.)

Weight:

6XC15 - Series 1,507 to 2,495 kg (3.322 to 5.500 lb.)6XC22 - Series 1,984 to 3,782 kg (4.974 to 8.338 lb.)6XC36 - Series 2,204 to 3,992 kg (4.859 to 8.800 lb.)

NOTE: The weights of the different OXYGEN CONTAINERS are listed in Para. 1.K. of section-TESTING AND FAULT ISOLATION-.

Subtask 35-21-14-870-003-A01C. Identification

This component is identified by an identification plate which has these data:

• the manufacturers logo,

• the manufacturers name,

• the part number,

• the description of equipment,

• the serial number,

• the date of assembly or test,

• the inspection stamp,

• the amendment status.

A self-adhesive label is located on the test button of the door assembly. It shows these data:

• 'EM' with the digit 2, 3, 4, 5 or 6 (applicable to the quantity of the masks),

• the product inspection date (MONTH and YEAR) of the installed oxygen generator (must not deviate from the inspection date of the container assy),

• Test,

• S or L (Lanyard Length: SHORT - 18", LONG - 35").

Nov 15/201235-21-14


Subtask 35-21-14-870-004-A01D. Description

(1) The OXYGEN CONTAINER contains (See Fig. 1):

• the chemical oxygen generator(s) (one or two as applicable to the quantity of masks),

• the mask assemblies,

• a container assembly.

The mask assemblies are connected to the chemical oxygen generator by supply tubesand lanyards.

(2) The Chemical Oxygen Generator

The chemical oxygen generator has a stainless steel housing filled with Sodium Chlorate(NACLO3). It has an outlet manifold with two or more ports (depends on the numberpersons the oxygen generator should supply) for the connection of the mask supply tubes. The oxygen generator has a firing pin which is held in position by a release pin that, ifremoved starts the oxygen flow. The release pin has an eyelet for the connection of the mask lanyards.The oxygen generator has an indicator dot on its ignition side (see Fig. 3) that shows thecondition of the oxygen generator as follows:

• If the indicator dot is coloured BLUE the oxygen generator has been BURNED OUT.

• If the indicator dot is coloured PINK the oxygen generator is NEW or NOT USED.

The chemical oxygen generator is located at the outer structure of the box assembly. It isattached with a clamp.The oxygen generators of the 6XC22 SERIES (22 min.) have an additional thermal shieldto limit the rise of temperature of surrounding parts. The thermal shield is attached by thegenerator clamp.

(3) The Mask Assemblies

Each mask assy is an oronasal phase-dilution type which has a rubber face piece with avalve housing. It gives a 100% oxygen flow from its reservoir bag and has a limited dilutionby ambient air. Furthermore it lets escape the exhaled air. The valve housing contains:

• three valves:

- a dilution-,

- an exhalation valve,

- a bag valve.

• a reservoir bag with a supply tube which has a flow indicator that shows the correctflow oxygen.

An elastic head band holds the mask assy in place during its usage. A lanyard cord isattached to the eyelet of the valve housing that makes the connection to the release pinof the oxygen generator (Ref. CMM 35-21-87 (FSCM 53655) for more details).The mask assemblies are protected against dust or moisture by a protection cap. Theprotection cap is located within the box assembly and has two supply tube access holes.It is attached with two cable ties to the box structure.

Nov 15/201235-21-14


(4) The Container Assembly

The container assembly has:

• a door assembly,

• a box assembly.

The door assembly is connected to the box assembly by door hinges which are attachedby each a pin and a locking washer.Two light shields (rubber profiles) at the sidewalls are installed to minimize the gap betweenthe container assy and the adjacent part (e.g. panel,...) of the aircraft.

(a) The door assy has:

• two door locking bolts,

• a test button,

• two access holes for a manual release tool.

1 The door locking bolts engage with the door latches of the box assembly. Theyhold the door assy closed as long as the door latches are released by anelectrical power signal or a manual release tool. The door locking bolts are installed in a bolt support of the door.

2 The test button lets the door assembly open some degrees for inspection andtesting. It prevents a mask drop and a repacking of the mask assemblies whenthe door assy is closed again.

3 The two access holes are used for a manual release tool that is necessary toopen the door assy manually (e.g. during shop maintenance or in case of amalfunction of the electrical door latch).

(b) The box assembly contains:

• a double door latch assembly,

• four fixation hinges,

• a box structure.

1 The double door latch is used to open the door assy automatically when 115VAC electrical power is supplied to its electrical terminals. It locks the doorlocking bolts when the door assy is closed.The double door latch consists of two single latches which are electricallyconnected in parallel (See Fig. 2001 of section SCHEMATICS AND WIRINGDIAGRAMS).The single latches are attached to the box structure, each with three screws.

2 The fixation hinges are necessary to attach the container assy easy and quickto the aircraft.The fixation hinges are attached to the box structure, each with a clasp.

(5) The different types of OXYGEN CONTAINERS are identified by their specific part numbers,which contains these informations:

• the number of masks,

• the type of oxygen used in the system,

Nov 15/201235-21-14


• the minimum duration of oxygen available,

• the lengths of lanyards and supply tubes,

• the colour of the door assembly.

Refer to the section - IPL-INTRO, Tables 10001-1 to 10001-5 - for correct identification ofthe unit.

Chemical Oxygen Container AssyFigure 1 /GRAPHIC 35-21-14-991-001-A01

Nov 15/201235-21-14


Chemical Oxygen Container Assy (2 to 4 Mask System (rear view))Figure 2 /GRAPHIC 35-21-14-991-002-A01

Nov 15/201235-21-14


Chemical Oxygen Container Assy (4 to 6 Mask Systems (rear view))Figure 3 /GRAPHIC 35-21-14-991-003-A02

Nov 15/201235-21-14


Chemical Oxygen Container Assy /-0005 Series and on (six mask system)Figure 4 /GRAPHIC 35-21-14-991-004-A01

Nov 15/201235-21-14


Subtask 35-21-14-870-005-A01E. Operation

(1) General

The OXYGEN CONTAINER (See Fig. 1) operates as a part of the aircraft emergencyoxygen system. It is installed into the aircraft passenger compartment to supply thepassenger with the necessary quantity of oxygen during emergency.

(2) Door Operation

An unusual decrease of the cabin pressure (above a cabin height of 4267,0 meter (14000ft.), 60 kPa (8.864 psi)) activates a cabin pressure sensor. That gives a pulse to theelectrically operated double door latch assy which releases and opens the door assy sothat the masks can fall out.After the masks have been released from the OXYGEN CONTAINER they hang down overthe passengers head on their lanyards.

OXYGEN FLOW SCHEMATICFigure 5 \GRAPHIC 35-21-14-991-005-A01

Nov 15/201235-21-14


(3) Oxygen Supply

The lanyards are connected to a release pin which is installed on the firing pin of the oxygengenerator.In this condition the chemical oxygen generator is prepared for emergency oxygen supply.

A pull to one or all masks removes the release pin and lets the firing pin move into theoxygen generator. This causes the ignition and therewith the reaction of the chemicalswithin the oxygen generator. The production of oxygen starts and cannot be stopped untilthe oxygen generator is empty (6XC15 Series = min. 15 minutes / 6XC22 Series = min.22 minutes) and / 6XC36 Series = min. 36 minutes).The oxygen flows with low pressure through the mask supply tubes into the reservoir bagwhich inflates and then into the mask assy.The flow indicator installed in the mask supply tubes shows the correct oxygen flow.

(4) Mask Operation

The oxygen flows through the reservoir bag and a bag valve (non-return type) into themask face piece.

(a) Inhalation

1 The passenger breathes in:

• the depression of the reservoir bag lifts the bag valve,• the oxygen flows as long as the reservoir bag is empty.

2 The passenger continues to breathe in:

• the dilution valve lifts (non-return type),• this lets the ambient air go into the mask face piece.

(b) Exhalation

1 The passenger breathes out:

• the dilution and the bag valve close,• the exhalation valve opens and the air breathed out is bled.

2 During breathe out, the oxygen:

• continues to flow through the mask supply tube (via the flow indicator),• inflates the reservoir bag for the next inhalation.

Nov 15/201235-21-14

COMPONENT MAINTENANCE MANUAL6XC15 / 6XC22 / 6XC36 SeriesTESTING AND FAULT ISOLATION

TASK 35-21-14-700-801-A011. Test of the Chemical Oxygen Container Assembly

A. General

The test of the chemical oxygen container assembly is restricted to a test of the door assyfunctioning.

B. Reason for the Job

Self Explanatory

C. Job Set-up Information

(1) Tools, Fixtures and Equipment

NOTE: Equivalent alternatives may be used for listed items.

NOTE: Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND MATERIALS for fulldetails of the special tools in this list.

(2) Referenced Information

NONE

D. Job Set-up

WARNING: STRICTLY OBEY THE PROCEDURES FOR USE OF OXYGEN EQUIPMENT.DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS MADE FROM PETROL INTHE WORK AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Do an external visual check and if necessary an external cleaning of the unit before youstart the operational tests.

REFERENCE QTY NAME

No specific 1 Electrical power source (adjustable 0 to 130 VAC, 400 Hz, 0 to 1,0 A)

No specific 1 Ohm-Meter (0 to 500 MOhm)

No specific 1 Insulation Resistance Tester (500 +/-25VDC)

No specific 1 Screwdriver with a blade-width of max. 3,0 mm (0.118 in.)

E60100-00 1 Manual Release Tool

E71516-00 1 Pliers

No specific 1 Balance (0 to 4,0 kg +/- 0,01 kg (0 to 8.82 lb +/- 0.002lb))

1 Test set-up which has aircraft installation dimen-sions

Nov 15/201235-21-14


(2) Do all tests under normal standard test laboratory ambient conditions:

• Ambient temperature 25 +/- 10o C (77 +/- 14o F)

• Barometric pressure 101,3 +/- 5,0 KPa (14.696 +/- 0.725 psi)

• Relative humidity less than 90%

Subtask 35-21-14-700-001-A01

E. Inspection of the Unit Under Test (UUT)

(1) Inspect the top surface of the door assy. It must be aligned with the box structure and befree of scratches, peeling or other damage.

CAUTION: THE COLOURED OUTER SURFACE OF THE DOOR ASSY IS VERY SENSITIVETO SCRATCHES OR OTHER MECHANICAL AFFECTS. CLEAN WORK AREA SO THAT NO DAMAGE OF THE DOOR ASSY CANOCCUR.

(2) Put the container assy to be tested on clean soft cloth so that the door assy shows faceup and the oxygen genrator(s) is/are in front of you.

(3) Put the manual release tool PN E60100-00 (See Fig. 901) into the release access holesof door assy. Push it slightly against the lever of the door latch assy and let the door assy open.

(4) Refer to the data of the identification plate and test button decal and compare with theparts installed in the container:

• The correct type and quantity of masks,

• The mask lanyard and tube length.

• The installed oxygen generator(s) (15 or 22 minutes) and date of manufacturing,

CAUTION: MAKE SURE THAT:

• THE WARNING FLAG ASSY (40) HAS BEEN CORRECTLY INSTALLED INTOTHE FIRING PIN OF THE OXYGEN GENERATOR ASSY (20) (FIG. 301)

• A NOT USED OR NEW OXYGEN GENERATOR IS INSTALLED(THE INDICATOR DOT MUST SHOW THE COLOUR PINK).

CAUTION: MAKE SURE THAT ALL TUBES AND LANYARDS ARE BE STOWED SO THATTHEY DO NOT BECOME TWISTED DURING THE OPERATION OF THE CON-TAINER DOOR ASSY.

(5) Close door assy with a slight push next to the test button until you hear a -CLICK- noise.

(6) The gap between the door assy and the box assy must be equally around.If the gap is not equal you must adjust the door assy as specified in section -ASSEMBLY-.

(7) Refer to CMM 35-21-87 (FSCM 53655) or 35-25-01 (FSCM D1379) for Testing and FaultIsolation of the mask assemblies.

Nov 15/201235-21-14


Subtask 35-21-14-750-001-A01

F. Insulation Resistance Test

NOTE: If any fault is located during the test, all connections must be checked step by step forcorrect assembly.

Subtask 35-21-14-700-002-A01

G. Door Assy Test Button Test

CAUTION: MAKE SURE THAT NO ITEMS ARE BETWEEN WITH THE DOOR ASSY AND THECONTAINER BEFORE YOU CLOSE THE DOOR ASSY. YOU CAN DAMAGE THEDOOR ASSY.

Subtask 35-21-14-700-003-A01

H. Manual Release Test of the Door Assy


ACTION RESULT

(1) Short circuit the cables of the double door latch assy. Then connect the insulation resistance tester to the cables and the con-tainer assy.

(2) Apply a voltage of 500 +/- 25 VDC to the unit and measure the insulation resistance.

The insulation resistance value must be min. 100 MOhm.

(3) Remove the insulation resistance tester and close the door assy with a slight push next to the test button until you hear a -CLICK- noise.

ACTION RESULT

(1) Pull out test button until its test decal is to see and rotate it 90o.

During release, the test button must be remain in this position.


(3) Return test button into its normal position.

Nov 15/201235-21-14


Subtask 35-21-14-750-002-A01

I. Preparation of the Functional Tests

(1) Install the container in a Test Device which has aircraft installation conditions.

CAUTION: MAKE SURE THAT THE CONTAINER IS CORRECTLY CONNECTED TO THETEST DEVICE.

(2) Connect the cables of the double door latch assy to an adjustable 115 V AC, 400 Hzelectrical power source. Refer to the test setup shown in Fig. 1001 and the electrical wiring diagram (See -SCHE-MATIC AND WIRING DIAGRAMS-, Fig. 2001).

ACTION RESULT


(2) Put the manual release tool PN E60100-00 (See Fig. 9001) through manual release access holes of the door assy. Push it slightly into the lever of the door latch.

The door assy must open a few degrees and stop at the test button's test position.


Nov 15/201235-21-14


Test Setup Figure 1001 \GRAPHIC 35-21-14-991-006-A01

Nov 15/201235-21-14


Subtask 35-21-14-750-003-A01

J. Electrical Release Test of the Door Assy


NOTE: If any fault is located during the test, all connections must be examined step by step for correctassembly.

ACTION RESULT

(1) Adjust AC-power source to 106 V AC mea-sured by the voltmeter (Ref. Fig. 1001).


(3) Set the test switch to ON position. The door latch must release and the door assy must open a few degrees and stop at the test button's test position.

(4) Within the next 5 seconds read and note the current consumption as shown on the Am-peremeter (Ref. Table 1001).

The current consumption must be <100 mA at 106 VAC, 400 Hz.

(5) Immediately set test switch to OFF position.


(7) Return test button back to its normal posi-tion.

(8) Remove the oxygen container to test from the test device

Nov 15/201235-21-14


TASK 35-21-14-810-801-A012. Chemical Oxygen Container Assy Fault Isolation

A. General

The fault isolation of the chemical oxygen container assembly is restricted to the door assyfunctioning only.

B. Reason for the Job

Self Explanatory

C. Job Set-up Information

(1) Upon failure during a test, check the external wiring and function of the external circuits.

(2) Do the fault isolation as specified in the following Table, if the result of the tests has notbeen satisfactorily completed.

(3) Refer to the wiring diagram in section -SCHEMATIC AND WIRING DIAGRAMS- Fig. 2001,as a help on the fault isolation.

(4) Fully test the unit if a fault has been found and repaired. This makes sure that repairs havenot damaged portions of the circuits.

(5) Refer to CMM 35-21-87 (FSCM 53655) or 35-25-01 (FSCM D1379) for the fault isolationof the mask assemblies.

Subtask 35-21-14-810-001-A01

D. Table of Fault Isolation

NOTE: For the replacement or adjustment of components refer to section ASSEMBLY.

FAULT POSSIBLE CAUSE CORRECTION

(1) Door assy does not fully open manually.

(a) Damaged or incorrect use of the manual release tool.

Replace the manual release tool, retest unit.

(b) Foreign matter. Disassemble, clean and re-test unit

(c) Damaged door hinges, bent or broken torsion springs, bent door locking bolt or defective latch assy.

Replace defective part, retest unit.

(2) Door assy does not open electrically.

(a) Defective latch assy. Replace latch assy, retest unit.

Nov 15/201235-21-14


(b) Supply voltage too low or defective wiring.

Adjust supply voltage to 115 V AC, 400 Hz, check wiring, retest unit.

(c) Defective door bolt Replace door bolt, retest unit.

(3) Door assy does not close and latch correctly.

(a) Defective door bolt. Replace door bolt, retest unit.

(b) Foreign matter. Disassemble, clean, retest unit.

(c) Damaged hinge shield or defective latch assy

Replace defective part, retest unit.

(d) Incorrect location of mask assemblies.

Install mask assemblies cor-rectly (Ref. ASSEMBLY).

FAULT POSSIBLE CAUSE CORRECTION

Nov 15/201235-21-14


SCHEMATIC AND WIRING DIAGRAMS

1. Wiring Diagram

Wiring DiagramFigure 2001 \GRAPHIC 35-21-14-991-007-A01

Nov 15/201235-21-14


DISASSEMBLY

TASK 35-21-14-000-801-A011. Disassembly of the Chemical Oxygen Container Assy

A. Job Set-up Information



NOTE: Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND MATERIALS for fulldetails of the special tools.


NONE

B. Job Set-up


(1) Make a check of the history of the component to find any defective areas.

(2) Refer to TESTING AND FAULT ISOLATION or INSPECTION/CHECK to find the cause ofa malfunction or the condition of the unit.

NOTE: Use only the disassembly procedures necessary to get access to and disas-semble an unserviceable item.

(3) Cross-references to parts located in figures, other than referenced in the heading, areidentified by their IPL-Figure / Item No. e.g. (3-30).

Subtask 35-21-14-000-001-A01

C. Installation of the Warning Flag Assy (40) (Only if necessary) (Ref. IPL-Fig. 1 to Fig. 1E)

CAUTION: DO NOT DAMAGE THE COLOURED OUTER SURFACE OF THE DOOR ASSY (2-10).CLEAN WORK AREA AND USE A CLEAN LINT-FREE SOFT CLOTH SO THAT NODAMAGE OF THE DOOR ASSY CAN OCCUR.

(1) Put the oxygen container with the door assy on a clean soft cloth. Then turn it so that theoxygen generator assy (20) is/are in front of you.

CAUTION: TAKE CARE TO THE MASK LANYARDS. AN ACCIDENTAL PULL CAN REMOVETHE RELEASE PIN (30) FROM THE OXYGEN GENERATOR ASSY (20) ANDSTART THE FLOW OF OXYGEN WHICH CANNOT BE STOPPED.

REFERENCE QTY NAME


E71516-00 1 Pliers

TBD Pliers (removal of the door pin)

Nov 15/201235-21-14


(2) Check the oxygen generator assy (20) visually for correct installation of the release pin(30) (See Fig. 3001).

(3) Check the colour indicator dot (located on the starter side of the oxygen generator assy(20)) for discolouration. It shows the condition of the oxygen generator assy (20):If the colour of the indicator dot is:

• BLUE the oxygen generator assy (20) has been BURNED OUT.

If the colour of the indicator dot is:

• PINK the oxygen generator assy (20) is NEW. Then strictly follow the procedures as specified in the next Steps.

(4) If necessary, loosen the screws of the clamp (10).

Installation of the Warning Flag AssyFigure 3001 \GRAPHIC 35-21-14-991-007-A01

(5) Put the Pliers E71516-00 between the starter housing and the release pin (30)) of theoxygen generator assy (20). The firing pin comes out and you see the mounting hole for the safety pin of the warningflag assy (40).Make sure that the rubber pad of the Pliers E71516-00 shows face to the starter housing.

(6) Hold the Pliers E71516-00 in this position and put the pin of the warning flag assy (40) intothe mounting hole. Then remove the Pliers E71516-00.

Subtask 35-21-14-070-001-A01

D. Removal of the Oxygen Generator Assy (20)

CAUTION: MAKE SURE THAT THE SAFETY PIN OF THE WARNING FLAG ASSY (40) HASBEEN CORRECTLY INSTALLED INTO THE FIRING PIN OF THE OXYGENGENERATOR ASSY (20) (REF. FIG. 3001).IF THE WARNING FLAG ASSY (40) HAS BEEN CORRECTLY INSTALLED, YOUMUST INSTALL IT AS SPECIFIED IN STEP C.(5) AND (6).

Nov 15/201235-21-14


(1) Carefully remove the release pin (30) together with the mask lanyards from the firing pinof the oxygen generator assy (20).

(2) Bend up the eye of the release pin (30) and remove the rings of the mask lanyards.

NOTE: Do not remove the rings from the mask lanyards unless replacement isnecessary (Ref. CMM 35-21-87 (FSCM 53655) or 35-25-01 (FSCM D1379).

CAUTION: DO NOT CUT OFF THE MASK SUPPLY TUBES FROM THE OUTLET MANIFOLDOF THE OXYGEN GENERATOR ASSY (20) WITH A KNIFE. THE MASK SUPPLY TUBES HAVE A SPECIFIED LENGTH WHICH MUSTAGREE WITH THE INSTALLATION LOCATION OF THE AIRCRAFT.IF NECESSARY, TRY TO SLIP A SMALL THIN BLADED TOOL BETWEEN THEOUTLET MANIFOLD AND THE MASK SUPPLY TUBE. THEN PULL THE MASK SUPPLY TUBES VERY CAREFULLY AWAY FROM THEOUTLET MANIFOLD.

CAUTION: DO NOT TOUCH THE OUTLET FITTINGS OF THE GENERATOR OUTLETSWITH BARE FINGERS.

FOR 6XC15 SERIES ONLY (Step (3) and (4) (See IPL-Fig. 1, 1A and 1D))

(3) Carefully disconnect the mask supply tubes from the generator outlet ports.

(4) Remove the clamp (10) and lift up the oxygen generator assy (20) from the container assy(110).

FOR 6XC22 / 6XC36 SERIES ONLY (Step (5) to (7) (See IPL-Fig. 1B, 1C, 1E to 1F))

(5) If the oxygen generator assy (20) is in a serviceable condition (the colour indicator dotshows PINK, the useful life is within its time limit) go on with Step (a).

(a) If necessary, open the door assy (2-10) as specified in Step E.(2).

(b) Disconnect the mask supply tubes at the connecting piece (65) of the hightemperature tubes (63).

(6) If the oxygen generator assy (20) has been used (the colour indicator dot shows BLUE)and must be replaced go on with Step (a).

(a) Remove the cable ties (55) from the high temperature tube (63) at the generatoroutlet ports.

Installation of the Mask Supply TubesFigure 3002 /GRAPHIC 35-21-14-991-008-A01

Nov 15/201235-21-14


(b) Disconnect the high temperature tubes (63) at the generator outlet ports.

(c) Do not remove the high temperature tubes (63) or the connecting piece (65) fromthe mask supply tubes unless replacement is necessary (See Fig. 3002).

(7) Remove the clamp (10) together with the thermal shield (15) and lift up the oxygengenerator assy (20) from the container assy (110).

Subtask 35-21-14-070-001-A01

E. Removal of the Mask Assemblies (60)

CAUTION: DO NOT DAMAGE THE COLOURED OUTER SURFACE OF THE DOOR ASSY (2-10).CLEAN WORK AREA AND USE A CLEAN LINT-FREE SOFT CLOTH SO THAT NODAMAGE OF THE DOOR ASSY CAN OCCUR.

(1) Turn the oxygen container so that the door assy shows face up and the test button (2-40)is in front of you.

(2) Open the door assy (2-10) as follows (See IPL-Fig. 2):

(a) Put the manual release tool PN E60100-00 (See Fig. 9001) into one of the manualrelease access holes of the door assy (10). Then push it lightly down so that leverof the applicable door latch assy (180) releases.

(b) Remove the manual release tool PN E60100-00 from the manual release accesshole and do Step (a) again to release the second door latch assy (180).

(c) Fully open the door assy (10).

(3) Remove the lanyards from the lanyard fixation(s) (83).

NOTE: Do not remove the cable tie (85) and the lanyard fixation (83) from the containerassy (110) unless replacement is necessary.

(4) Remove the mask assemblies (60) from the container assy (110) (See IPL-Fig. 1).

(5) Refer to CMM 35-21-87 (FSCM 53655) or 35-25-01 (FSCM D1379) for disassembly andoverhaul of the mask assemblies (60).

(6) Cut the cable ties (80) and remove the dust cover (70) from the container assy (110).

NOTE: Do not remove the -HOT- able (100) from the dust cover (70) unless replace-ment is necessary.

Subtask 35-21-14-070-002-A01

F. Disassembly of the Container Assy (110)

CAUTION: THE OUTSIDE COLOURATION OF THE DOOR ASSY (10) IS VERY SENSITIVEAGAINST SCRATCHES OR OTHER MECHANICAL AFFECTS.CLEAN WORK AREA SO THAT NO DAMAGE CAN OCCUR.

(1) Removal of the Door Assy (10) from the Box Assy (130) (Ref. IPL-Fig. 2)

(a) Push out the pin (30) with the pin removal pliers, discard the locking washer (20)and the door assy (10) from the box assy (130).

Nov 15/201235-21-14


(b) Put the door assy (10) with its coloured side on a clean soft cloth.

(2) Disassembly of the Door Assy (10) (Ref. IPL-Fig. 2)

CAUTION: THE OUTSIDE COLOURATION OF THE DOOR (120) IS VERY SENSI-TIVE AGAINST SCRATCHES OR OTHER MECHANICAL AFFECTS.CLEAN WORK AREA SO THAT NO DAMAGE CAN OCCUR.

(a) Removal of the Test Button (40) from the Door (120)

1 Pull out the pin (50) and remove the button (70) from the door (120).

NOTE: Do not remove the self-adhesive test label (60) from the button(70) unless replacement is necessary.

(b) Remove the door locking bolt (80) from the bolt support (90).

(c) Remove the door bolt support (90) from the door (120).

NOTE: Do not remove these parts from the door (120) unless replacement is neces-sary:

• the bonded light shield profile (100), or (105) (-0006 Series only),

• the installation instruction able (110).

(3) Disassembly of the Box Assy (130) (Ref. IPL-Fig. 2)

(a) Remove the clasps (150) and the fixation hinges (140) from the box structure (200).

(b) Removal of the Double Door Latch Assy (160) from the box structure (200)

1 Cut off the cable ties (180) from the cable assy of the double door latch assy(160).

2 Remove the screws (170) and the double door latch assy (160) from the boxstructure (200).

3 Do not disassemble the double door latch assy (160) more, unless replace-ment is necessary.Any try on disassembling of a single latch assy (180) can destroy it.

FOR CONTAINER ASSY OF SERIES -0005 ONLY (NOTE)

NOTE: Do not remove the bonded light shield profile (195) from the box structure (200)unless replacement is necessary.

NOTE: Do not remove the -CAUTION- able (90) or the identification plate (120) from thecontainer assy (110) unless replacement is necessary.

Nov 15/201235-21-14


CLEANING

TASK 35-21-14-100-801-A011. Cleaning of the Chemical Oxygen Container Assembly


WARNING: STRICTLY OBEY THE PROCEDURES FOR USE OF OXYGEN EQUIPMENT. DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS, MADE FROM PETROL,IN THE WORK AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Consumables

WARNING: USE ONLY SPECIFIED CLEANING MATERIALS AND SOLUTIONS ORTHEIR EQUIVALENTS. THE SURFACE PROTECTION COULD BEDAMAGED IF UNSPECIFIED MATERIALS ARE USED.


NOTE: Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND MATERIALS for fulldetails of the special tools in this list.

Subtask 35-21-14-170-001-A01B. Cleaning of the Door Assy

CAUTION: DO NOT DAMAGE THE COLOURED OUTER SURFACE OF THE DOOR ASSYDURING CLEANING. WIPE THE COLOURED OUTER SURFACE OF THE DOOR ASSY VERY CARE-FULLY.

(1) Put a clean, soft and lint-free cloth into the soapy water momentarily.

(2) Wipe the inner and outer surface of the door assy. Then flush with distilled water.

(3) Put the door assy with its coloured surface up on a clean, dry, lint-free cloth and let it dryin the air.

Subtask 35-21-14-160-001-A01C. Cleaning of the Latch Assy and the Oxygen Generator

CAUTION: THE CLEANING OF THE LATCH ASSY AND THE OXYGEN GENERATOR ISLIMITED TO OUTER SURFACE AREA ONLY (REMOVAL OF DUST).

REFERENCE NAME

TT-I-735 GRADE A Isopropyl Alcohol

No specific Soapy Water

No specific Distilled Water

No specific Lint-Free Cloth

No specific Soft Bristle Brush (non-metallic)

Nov 15/201235-21-14


CAUTION: DO NOT USE WET MATERIAL TO CLEAN THE OXYGEN EQUIPMENT. HUMID-ITY CAN MAKE THE OXYGEN EQUIPMENT UNSERVICEABLE.

(1) Use a dry clean, lint-free cloth and wipe outer surfaces of the latch assy and the oxygengenerator.

Subtask 35-21-14-170-002-A01

D. Cleaning of the Mask Assemblies

CAUTION: THE CLEANING OF THE MASK ASSEMBLIES IS LIMITED TO THE INNER ANDOUTER SURFACE ONLY (SEE CMM 35-24-03 (FSCM XXXXX) FOR MOREDETAILED INFORMATION).

(1) Put all silicon and plastic parts into a tank filled with hand-warm soapy water.

(2) Wipe each part with a clean, lint-free cloth. Then flush parts with distilled water.

(3) Put the cleaned parts into a non-metallic tray and cover with a dry, clean, lint-free cloth.

(4) Let parts dry in the air.

Subtask 35-21-14-110-001-A01

E. Removal of Adhesive Remaining

WARNING: USE SOLVENTS/CLEANING AGENTS ONLY IN AN AREA WITH A GOODSUPPLY OF AIR.STRICTLY OBEY THE MANUFACTURERS INSTRUCTIONS.PUT ON PROTECTIVE CLOTHINGDO NOT:- DRINK SOLVENTS OR CLEANING AGENTS- SMOKE- BREATHE THE GAS. SOLVENTS/CLEANING AGENTS ARE POISONOUS AND FLAMMABLE.

WARNING: USE THE APPROVED HAND AND EYE PROTECTION WHEN YOU APPLY THECLEANING AGENT.

WARNING: IF YOU GET THE CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES:- FLUSH AWAY WITH CLEAN WATER- IF NECESSARY GET MEDICAL AID.

(1) Put a clean lint-free cloth into the ISOPROPYL ALCOHOL momentarily and wipe applica-ble surfaces.

(2) After removal of all adhesive remaining let surface dry in the air.

Nov 15/201235-21-14


INSPECTION/CHECK

TASK 35-21-14-200-801-A011. Inspection/Check of the Chemical Oxygen Container Assembly

NOTE: Checks must be done by approved personnel only.


WARNING: STRICTLY OBEY THE PROCEDURES FOR USE OF OXYGEN EQUIPMENT. DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS, MADE FROM PETROL,IN THE WORK AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Check all parts visually by use of a strong light (preferably under magnification) for nicks,cracks, cuts, corrosion, chafing, scoring, stripped or crossed threads or any other defects.

Subtask 35-21-14-210-001-A01B. Check of the Door Assy

(1) Check the door assy visually for scratched-, dented-, chafed- or discoloured outsidesurface areas and global deformation.

(2) Replace the door assy if any of the a. m. defects exists.

Subtask 35-21-14-210-002-A01C. Check of the Door Bolts

(1) Check the door bolts for too much wear of the contact areas and global deformation. Noneis permissible.

Subtask 35-21-14-210-003-A01D. Check of the Double Door Latch Assy

(1) Check the outside of the latch assy for cracks, overheating, deterioration or other damage.

(2) Check the actuation lever for correct installation and function.

(3) Check the electrical wiring for loose or defective connections and the insulation for burned,worn or broken areas.

(4) Replace the latch assy if any of the a. m. defects exists.

Subtask 35-21-14-210-004-A01E. Check of the Box Assy

(1) Check all the bores and the shoulders for nicks, chafing areas, dents and global deforma-tion.

(2) Replace box assy if any damage exists.

Nov 15/201235-21-14


Subtask 35-21-14-210-005-A01F. Check of the Oxygen Generator

(1) Check colour indicator dot, which shows the condition of the oxygen generator, fordiscolouration:

• If the colour indicator dot shows BLUE the oxygen generator has been burned out.

• If the colour indicator dot shows PINK the oxygen generator is new or not used.

(2) Check the outlet manifold for deformation, corrosion, cracks or loose fit.

(3) Compare the date of inspection shown on the test label, with the date of inspection shownon the generators identification label.These data must show the same month and year and must be within the useful life (15years) of the oxygen generator.

(4) Replace the oxygen generator if the time limit is out of range.

Subtask 35-21-14-210-006-A01G. Check of the Mask Assemblies (Ref. also CMM 35-21-87 (FSCM 53655) or 35-25-01 (FSCM

D1379))

(1) Check the inner and outer surfaces of the mask assemblies for contamination, discolou-ration, or excessively soiled areas.

(2) Check the supply tubes for permanent kinks, discolouration and safety connection to themask.

(3) Measure supply tube and lanyard lengths. Compare values with values set out in sectionILLUSTRATED PARTS LIST, Table 1001-2 and 1001-3.

(4) Hold the mask assy and check lanyard to mask connection by a short firm pull on thelanyard.

(5) Check the crimped cord clamps of the lanyard for safety crimping by a short firm pull onthe plastic ring.

(6) Check the reservoir bag for correct connection to the mask. Check its outer surface fortears or splits and readable inscription.

(7) Check the elastic head band for excessive elongation, ageing and extension and contrac-tion. It must be well-knotted at each end of the mask holes.

(8) Replace mask assembly if any damages exists.

Subtask 35-21-14-210-007-A01H. Check of the Identification Plates and Self-Adhesive Labels

(1) Check that the data on the identification plate and the self-adhesive labels are clearly ableto be read.Check plates and labels for signs of deterioration and safety attachment.

REPAIRPAGE 6001

Nov 15/201235-21-14


REPAIR

TASK 35-21-14-300-801-A011. Repair of the Oxygen Container






REFERENCE QTY NAME

No Special Tools


NONE

B. Job Set-up


(1) Refer to 'INSPECTION/CHECK' for limits of damage.

(2) Refer to CMM 35-21-87 FSCM 53655 for repair information of the mask assemblies.

Subtask 35-21-14-350-001-A01C. The repair of the unit is limited to the change of parts or components only

Nov 15/201235-21-14


ASSEMBLY

TASK 35-21-14-400-801-A011. Assembly of the Chemical Oxygen Container Assy

A. General

(1) Refer to the ILLUSTRATED PARTS LIST for FIGURE / ITEM Numbers. Start in IPL-Fig. 1.Cross-references to parts located in figures, other than referenced in the heading, areidentified by their IPL-Figure / Item No. e.g. (1-30A, 1A-30).

(2) Some IPL-Variant Figures are included in the IPL to show the different types of the chemicaloxygen containers.

B. Job Set-up Information

(1) Tools, Fixtures, Equipment and Materials



(2) Consumables

C. Job Set-up


CAUTION: DO NOT INSTALL PARTS WHICH HAVE BEEN DROPPED TO THE FLOOR DURINGASSEMBLY (E.G. OXYGEN GENERATOR, BOX, DOOR ASSY OR DOOR LATCHASSY).REPLACE EXPENDABLE PARTS SUCH AS SELF-LOCKING NUTS, O-RINGS, LOCK-ING WASHERS, ... .

(1) Make sure that the Cleaning, Inspection/Check and Repair procedures have been donebefore you start with the assembly.

REFERENCE QTY NAME


GS2B Pliers, Cable Tie

E71516-00 1 Pliers

TBD 1 Pliers for Door installation

REFERENCE NAME

K+S POLYOLEFIN Mixed Adhesive Set

Nov 15/201235-21-14


(2) Do a full functional test as specified in section TEST and FAULT ISOLATION after youhave finished the Assembly procedure.

Subtask 35-21-14-440-001-A01

D. Assembly of the Container Assy (110) (Ref. IPL-Fig. 1 to 1E)

CAUTION: MAKE SURE THAT ALL COMPONENTS ARE CLEAN BEFORE ASSEMBLY.

CAUTION: DO THE OPERATIONS ON A SOFT, CLEAN WORK SURFACE TO PREVENT DAMAGETO THE COMPONENTS.

(1) Assembly of the Box Assy (130) (See IPL-Fig. 2)

FOR CONTAINER ASSY OF SERIES -0005 ONLY (Step (a))

(a) Where applicable, bond a new self-adhesive light shield (195) on the box structure(200) (See IPL-Fig. 2, detail A).

(b) Installation of the Double Door Latch Assy (160) on the Box Structure (200) (Ref.IPL-Fig. 2)

NOTE: Check that the connector pins of the red- and white power supply cablehave been safety crimped to the wiring. If not, put new connector pins on the wiring ends. Crimp the connectorpins with an applicable crimping tool.

1 Turn the box structure (200) so that the openings for the double door latchassy (160) shows face up and are in front of you.

2 Install the double door latch assy (160) with the screws (170) on the boxstructure (200).Make sure that the cable contacts show face to the right hand side of the box.

3 Tighten the screws (170) with an applicable torque wrench to a torque valueof 0,1 to 0,4 Nm (0.885 to 3.54 lbf in.).

4 Attach the power supply cable with the cable ties (180) along the sidewall ofthe box structure (210) (See Fig. 1, (-Latch Side- view) of section DESCRIP-TION AND OPERATION).

(c) Install the fixation hinges (140) with the clasps (150) on the box structure (200).

(2) Installation of the dust cover (70) into the box (See IPL-Fig. 1)

(a) If removed, bond a new -HOT- able (100) into the dust cover (70).

(b) Put the dust cover (70) into box assy 2-130).

(c) Attach the dust cover (70) with the cable ties (80) to the bottom structure of thebox assy (2-130).

(3) Assembly of the Door Assy (10) (Ref. IPL-Fig. 2)

CAUTION: THE COLOURED OUTER SURFACE OF THE DOOR ASSY (20) IS

Nov 15/201235-21-14

COMPONENT MAINTENANCE MANUAL6XC15 / 6XC22 / 6XC36 SeriesSENSITIVE TO SCRATCHES OR OTHER MECHANICAL AFFECTS. DO THE OPERATIONS ON A SOFT, CLEAN WORK SURFACE TOPREVENT DAMAGE TO THE COMPONENTS.

(a) Put the door (120) with its coloured surface onto a clean soft surface (Preferablycovered with a dry, clean lint-free cloth).

FOR CONTAINER ASSY OF SERIES -0005 ONLY (Step (b))

WARNING: STRICTLY OBEY THE MANUFACTURERS INSTRUCTIONS WHENYOU USE THE MIXED ADHESIVE -POLYOLEFIN-.

(b) Where applicable, bond a new light shield profile (100) with the mixed adhesivePOLYOLEFIN to the door (120) (See IPL-Fig. 2, detail B).

FOR CONTAINER ASSY OF SERIES -0006 ONLY (Step (b))

(c) Where applicable, bond each a new light shield profile (100, 105) with the mixedadhesive POLYOLEFIN to the door (120) (See IPL-Fig. 2, detail B and C).

(d) Put the bolt supports (90) in the applicable guide supports of the door (120).

(e) Turn the door locking bolts (80) in the bolt supports (90).

(f) Assembly of the Test Button (40)

1 If necessary, bond a new self-adhesive test label (60) on the button (70).

NOTE: Make sure that the data (Month / Year) printed on the self-adhesivetest label (60) agree with them of the oxygen generator assy (1-20) which is later installed. A new self-adhesive test label (60) is supplied with the new oxygengenerator assy (1-20).

(g) Move the test button (40) from the coloured side of the door (120) into its accesshole.

CAUTION: MAKE SURE THAT THE PIN (50) HAS BEEN CORRECTLY INSTALLEDWITHIN THE LONG HOLE OF THE TEST BUTTON (40). IF NOT, THE FUNCTION OF THE TEST BUTTON (40) IS NOT SATIS-FIED.

(h) Safety the test button (40) with the pin (50).

NOTE: Use a small screwdriver and push the compression spring into the innerof the test button (40). Then put the pin (50) into the long hole, align it and let the compressionspring release.

(i) If removed bond a new applicable installation instruction label (110) to the door(120).

NOTE: Remove the adhesive remaining from the area of the old label beforeyou bond the new one (Ref. section -CLEANING-).

(4) Installation of the Door Assy (10) on the Box Assy (130) (Ref. IPL-Fig. 2)

Nov 15/201235-21-14


(a) Put the door assy (10) its hinges on the box assy (130). Then install the pin (30)and the locking washer (20).

(b) Close the door assy (10) with a slight push next to the test button until you hear a-CLICK- noise.

(c) Check that the door assy (10) is flush with the box assy (130) and not be bowed.Adjust the door assy (10) as specified in the next Step if it is not flush.

(5) Adjustment of the Door Assy (10) (Ref. IPL-Fig. 2)

(a) Put a screwdriver (max. blade-width 3,0 mm (0.118 in.)) into the maintenanceaccess holes of the door latch assemblies (190).

(b) Turn the door locking bolt (80) until the door assy is flush with the box assy (130).

(c) Remove the screwdriver.

(d) Open the door assy (100) with the manual release tool PN E60100-00 and closeit again. Check the adjustment of the door assy (10) again.

(e) Repeat steps (a) to (d) as necessary until the door assy (10) is correct adjusted tothe box assy (130).

Subtask 35-21-14-450-001-A01

E. Installation of the Oxygen Generator Assy (20) on the Container Assy (110)

WARNING: STRICTLY OBEY THE PROCEDURES FOR USE OF OXYGEN EQUIPMENT.DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS MADE FROM PETROLIN THE WORK AREA OF THIS OXYGEN EQUIPMENT. YOU CAN CAUSE A DANGEROUS FIRE HAZARD.

CAUTION: MAKE SURE THAT ALL COMPONENTS ARE CLEAN AND DRY BEFORE ASSEMBLY.

CAUTION: THE COLOURED OUTER SURFACE OF THE DOOR ASSY (20) IS SENSITIVE TOSCRATCHES OR OTHER MECHANICAL AFFECTS. DO THE OPERATIONS ON ASOFT, CLEAN WORK SURFACE TO PREVENT DAMAGE TO THE COMPONENTS.

(1) Put the container assy (110) with the door assy on a flat soft surface so that the generatorside is in front of you.

FOR 6XC15 SERIES ONLY (Step (2) (See IPL-Fig. 1, 1A and 1D))

(2) Put the clamp (10) into the applicable guiding channel of the box assy (2-130). Make sure that the hexagon head of the clamp screw shows face to the door assy (2-10).

FOR 6XC22 / 6XC36 SERIES ONLY (Step (3) and (4) (See IPL-Fig. 1B, 1C, 1E to 1G))

(3) Move the clamp (10) through the long slots of the thermal shield (15) until the clamp screwis close to it. Make sure that the short free clamp end (located at the clamp screw) of the clamp (10)moves also in the slot.

Nov 15/201235-21-14


(4) Put the clamp (10) into the applicable guiding grooves of the box assy (2-130). Make sure that the hexagon head of the clamp screw shows face to the door assy (2-10).

CAUTION: MAKE SURE THAT YOU HAVE THE CORRECT TYPE OF OXYGEN GENERA-TOR ASSY. IT MUST AGREE WITH THE QTY OF MASKS (2 TO 6) AND THE DURATION OFOXYGEN (15 OR 22 MINUTES).

CAUTION: MAKE SURE THAT THE INDICATOR DOT ON THE STARTER SIDE (SEE FIG.7002) OF THE OXYGEN GENERATOR ASSY (20) HAS THE CORRECT CO-LOUR:IF THE COLOUR OF THE INDICATOR DOT IS:

• BLUE THE OXYGEN GENERATOR ASSY (20) HAS BEEN BURNED OUT.

IF THE COLOUR OF THE INDICATOR DOT IS:

• PINK THE OXYGEN GENERATOR ASSY (20) IS NEW OR NOT USED.

CAUTION: CHECK IF THE OXYGEN GENERATOR ASSY (20) HAS BEEN REPLACED.THE NEW TEST LABEL (2-50), SUPPLIED WITH A NEW OXYGEN GENERATORASSY AND MUST BE BONDED TO THE TEST BUTTON (2-40).

(5) Put the oxygen generator assy (20) (between the clamp (10)) on the outer structure of thebox assy (2-130).Make sure that:

• FOR 2 TO 4 MASK SYSTEMS ONLY (1 OXYGEN GENERATOR)the oxygen outlet shows face to the supply tube access hole located in the lower leftcorner of the dust cover (70) (See Fig. 7001).

• FOR 5 AND 6 MASK and 4 MASK (36 Min.) SYSTEMS ONLY (2 OXYGENGENERATORS)the oxygen outlets must show face to the supply tube access hole located in thesidewall mid of the dust cover (70) (See Fig. 7002).

(6) Tighten the clamp screws with an applicable torque wrench to a value of 0,5 to 0,6 Nm(0.3688 to 0.4426 ft./lbf).

Nov 15/201235-21-14


Oxygen Container Assy -0005 Series (2 and 4 Mask Systems) (lower side view)Figure 7001 /GRAPHIC 35-21-14-991-009-A01

Nov 15/201235-21-14


Oxygen Container Assy -0005 Series (22 min., 5 and 6 Mask Systems) (lower side view)Figure 7002 /GRAPHIC 35-21-14-991-010-A01

Nov 15/201235-21-14


F. Connection of the Mask Assemblies (60) to the Oxygen Generator Assy (20)

CAUTION: DO NOT MAKE A MIX OF MASKS FROM DIFFERENT MANUFACTURER WITHINAN OXYGEN CONTAINER (I.E. MASKS FROM SCOTT AVIATION TOGETHERWITH MASKS B/E AEROSPACE). EACH CONTAINER MUST CONTAIN ALWAYSMASKS OF THE SAME MANUFACTURER. IF ONE OR MORE MASKS NEED TOBE REPLACED YOU CAN TAKE SPARE MASKS OF THE CURRENT MANUFAC-TURER OR YOU MUST REPLACE ALL MASKS BY THE LATEST TYPE OF MASKSFROM B/E AEROSPACE.

CAUTION: MAKE SURE THAT YOU HAVE THE CORRECT TYPE OF MASK ASSEMBLIESRELATED TO THE TYPE OF CONTAINER ASSY. DO NOT MAKE A MIX OF DIFFERENT TYPES OF MASK ASSEMBLIES WITHINA CONTAINER ASSY. ALWAYS USE MASK ASSEMBLIES OF THE SAME TYPE AND MODIFICATIONSTATUS WITHIN A CONTAINER ASSY.

(1) Connection of the Mask Supply Tubes

(a) Refer to the installation instruction able (2-110) located at the door assy (2-10). This illustration shows you the correct connection of the mask supply tubes whichis effective for the oxygen container assy you assemble.

FOR 6XC15 SERIES ONLY (Step (b) and (c) (See IPL-Fig. 1, 1A and 1D))

(b) Move the mask supply tubes from the inside through the applicable access holeof the dust cover (70).

NOTE: The dust cover (70) has two supply tube access holes for differentquantity of mask systems. If you have a 2 to 4 mask system (1 oxygen generator) the applicableaccess hole is located in lower left corner.If you have a 5 to 6 mask system (2 oxygen generators) the accesshole is located in the middle and is protected with a profile around.

(c) Connect the mask supply tubes directly to the applicable outlet ports of the oxygengenerator assy (20). See Step (a) to make sure that you have the mask supply tubes correctly installed.

FOR 6XC22 / 6XC36 SERIES ONLY (Step (d) to (g) (See IPL-Fig. 1B, 1C, 1E to 1G))

(d) If removed, move the connecting pieces (65) into the supply tubes of the maskassemblies (60) (See Fig. 7003).

(e) Move the high temperature tubes (63) over the connecting pieces (65).

(f) Move the mask supply tubes together with high temperature tubes (63) from theinside through the access hole of the dust cover (70) (See the NOTE below Step(b).

Nov 15/201235-21-14


Connection of the High Temperature TubeFigure 7003 /GRAPHIC 35-21-14-991-011-A01

(g) Connect the mask supply tubes with the high temperature tubes (63) to theapplicable outlet ports of the oxygen generator assy (20). See Step (a) to make sure that you have the mask supply tubes correctly installed.

(h) Attach the high temperature tubes (63) with the cable ties (55) to the outlet portsof the generator assy (20) as shown in Fig. 7004.Use the cable tie pliers GS2B for the installation of the cable ties. Adjust cable tie pliers GS2B to a tension force of 12,0 +/-2,0 daN (26.976 +/-4.496lbf).

Installation of the Cable Ties Figure 7004 /GRAPHIC 35-21-14-991-012-A01

(2) Connection of the Mask Lanyards

CAUTION: DO NOT REMOVE THE RELEASE PIN (40) OF A NEW OR NOT USED OXYGENGENERATOR ASSY (20) WITHOUT AN INSTALLED WARNING FLAG ASSY (40)- OR VICE VERSA. YOU WILL CAUSE AN UNWANTED START OF OXYGEN FLOW.IF NECESSARY, INSTALL THE WARNING FLAG ASSY (40) AS FOLLOWS (SEEFIG. 7003):

• PUT THE PLIERS E71516-00 BETWEEN THE STARTER HOUSING AND

Nov 15/201235-21-14


THE RELEASE PIN (30) OF THE OXYGEN GENERATOR ASSY (20). THE FIRING PIN COMES OUT AND YOU SEE THE MOUNTING HOLE FORTHE SAFETY PIN OF THE WARNING FLAG ASSY (40).MAKE SURE THAT THE RUBBER PAD OF THE PLIERS E71516-00SHOWS FACE TO THE STARTER HOUSING.

• HOLD THE PLIERS E71516-00 IN THIS POSITION AND PUT THE SAFETYPIN OF THE WARNING FLAG ASSY (40) INTO THE MOUNTING HOLE. MAKE SURE THAT THE WAVED PART OF THE SAFETY PIN SHOWSFACE TO THE CLOSED DOOR ASSY (2-10) WHEN THE OXYGEN GEN-ERATOR (20) HAS BEEN INSTALLED INTO THE CONTAINER ASSY (110).

• THEN REMOVE THE PLIERS E71516-00 VERY CAREFULLY.

(a) If removed, put the lanyard fixation(s) (83) on the applicable frame of the boxstructure (200). Attach the lanyard fixation(s) (83) with the cable tie (85).

(b) Remove the release pin (30) from the firing pin (See Fig. 7005).

(c) If necessary, bend up the eyelet of the release pin (30).

(d) Always put the metallic ring of one mask lanyard in the eyelet of the release pin(30). Then bend the eyelet close to the pin shaft (See Fig. 7005).

(e) Move the metallic rings of the remaining mask lanyards over the shaft of the releasepin (30).

Starter Side of the Oxygen Generator Assy Figure 7005 /GRAPHIC 35-21-14-991-013-A01

(f) Lanyard Routing:

1 FOR 2 TO 4 MASK (15/22 Min.) and 2 TO 3 MASK (36 Min.) SYSTEMSONLY (1 OXYGEN GENERATOR):Put the release pin (30) together with the mask lanyards through the boxstructure opening located above the starter of the oxygen generator (20).

Nov 15/201235-21-14


2 FOR 4 (36 Min.), 5 (15/22/36 Min.) AND 6 MASK (15/22 Min.) SYSTEMSONLY (2 OXYGEN GENERATORS):Put the release pin (30) together with the applicable mask lanyards throughthe box structure openings located in the middle of the small sides (See Fig.7002).

(g) Move the release pin (30) together with mask lanyards into the applicable hole ofthe generator firing pin.Make sure that you have the lanyards of the correct mask assemblies connectedto the applicable oxygen generator (20). This is necessary because the mask drop axis of the container assemblies whichhave 2 to 4 masks is different to the ones which contain 5 and 6 masks.

(h) Turn the release pin (30) so that its eyelet is in line with the mask lanyards.

G. Installation of the Mask Assemblies (60) into the Container Assy (110) (See IPL-Fig. 1 to 1G)

(1) Mask Packaging (See Fig. 7006 and 7007)

CAUTION: MAKE SURE THAT YOU DO NOT DAMAGE THE MASK VALVES DUR-ING PACKAGING.CHECK THE MASK VALVES FOR CORRECT INSTALLATION AFTERPACKAGING.

(a) Put the mask on a flat surface (Step 1) (See Fig. 7007).

FOR -PULL FLAG- MASKS ONLY (Step (b) (See Fig. 7006)

(b) Wind the -PULL- flag lanyard, fold the -PULL- flag and put it into the masks facepiece.

Mask Packaging (with -PULL- Flag)Figure 7006 \GRAPHIC 35-21-14-991-014-A01

Nov 15/201235-21-14


Mask PackagingFigure 7007 \GRAPHIC 35-21-14-991-015-A01

Nov 15/201235-21-14


(c) Fold the masks reservoir bag lengthwise to a width of approx. 58,0 +/-5 mm (2.3 +/-0.2 in.) (2 folds) (Step 2).

(d) Put the folded reservoir bag along the outside of mask assy (60) (Step 3) and foldit as shown in Step 4.

(e) Spirally wind the mask supply tube clockwise into the inner space of the masksface piece (Step 5 and 6). Make sure the mask supply tube is not twisted.

(f) Fold the reservoir bag again and put it into the inner space of the wounded supplytubes (Step 7).

CAUTION: MAKE SURE THAT:

• THE WARNING FLAG ASSY (40) HAS BEEN INSTALLED CORRECTLY(See Fig. 7005),

• THE LOCATION OF THE TUBES AND LANYARDS IS CORRECT. MAKESURE THAT THEY:

- DO NOT HAVE KINKS,- CANNOT HANG UP TO ANY PART OF THE UNIT,- DO NOT BECOME TWISTED DURING EMERGENCY OPERATION.

(2) Put the mask assemblies (60) into the container assy (110) as shown on the illustration ofthe installation instruction label (2-110) and (See Fig. 7008).

For End-Units containing a -PULL-FLAG- Mask Assy only:

Make sure the -PULL FLAG- mask assemblies have the correct location within theapplicable container assy (See Fig. 7008).

Nov 15/201235-21-14


Mask Locations (Pull-Flag Masks only where applicable) (Single O2 Generator)Figure 7008 /GRAPHIC 35-21-14-991-016-A01

Nov 15/201235-21-14


Mask Locations (Pull-Flag Masks only where applicable) (Two O2 Generators)Figure 7008A /GRAPHIC 35-21-14-991-016-B01

Pull-FlagMask

6 Mask System

Pull-FlagMaskPull-Flag

Mask

5 Mask System

4 Mask System (64C15M..0XX0006 / 64C22M..0XX0006)

Pull-FlagMask

Nov 15/201235-21-14


Subtask 35-21-14-450-003-A01

H. Final Installation (See IPL-Fig. 1 to 1G)

(1) If necessary, turn the release pin (30) so that its eyelet is in line with the direction of themask lanyards.Very carefully (do not use uncontrolled force) pull the mask lanyards as long as they cannotgo behind the release pin (30) as shown in Fig. 7009.

Lanyard RoutingFigure 7009 /GRAPHIC 35-21-14-991-017-A01

Nov 15/201235-21-14


Lanyard FixationFigure 7010 /GRAPHIC 35-21-14-991-018-A01

Nov 15/201235-21-14


(2) Put the mask lanyards (coming from the generator assy (20)) on both sides between thelanyard fixation (83) and the frame of the box structure (2-200) (See Fig 7010).

CAUTION: BEFORE YOU CLOSE THE DOOR ASSY (2-10) MAKE SURE THAT:

• THE LOCATION OF THE TUBES AND LANYARDS IS CORRECT. MAKESURE THAT THEY:

- DO NOT HAVE KINKS,

- CANNOT HANG UP TO ANY PART OF THE UNIT,

- DO NOT BECOME TWISTED DURING EMERGENCY OPERATION.

• NO ITEMS ARE BETWEEN THE DOOR ASSY (2-10) AND THE BOX ASSY(2-130)

• YOU HEAR A -CLICK- NOISE WHEN THE DOOR LOCKING BOLT OF THEDOOR ASSY (2-10) HAS BEEN LOCKED.

CAUTION: DO NOT USE UNCONTROLLED FORCE WHEN YOU CLOSE THE DOOR ASSY(2-10). YOU CAN MAKE IT UNSERVICEABLE.

(3) Close the door assy (2-10) and lock it by a last light push next to the door locking bolts (2-80).

I. Do a full functional test as specified in section TESTING AND FAULT ISOLATION.

Nov 15/201235-21-14


SPECIAL TOOLS, FIXTURES. EQUIPMENT AND CONSUMABLES

TASK 35-21-14-940-801-A011. Special Tools, Fixtures and Equipment

NOTE: Equivalent alternatives can be used for listed items.

Manual Release Tool PNR E60100-00Figure 9001 \GRAPHIC 35-21-14-991-019-A01

Pliers PNR E71516-00 Figure 9002 /GRAPHIC 35-21-14-991-019-A01

PART No. DESCRIPTIONSUPPLIERS CODE

OR NAME ANDMANUFACTURER

PAGE BLOCKWHERE USED

E60100-00 MANUAL RELEASE TOOL

D1379 1000, 3000, 7000, 11000, 15000

E71516-00 PLIERS D1379 3000, 7000

TBD PLIERS D1379 3000, 7000

Nov 15/201235-21-14


TASK 35-21-14-940-802-A012. Consumables

NOTE: Equivalent alternatives can be used for listed items.

MATERIAL No.DESIGNATION

ANDSPECIFICATION

SUPPLIERS CODEOR NAME AND

ADDRESSPAGE BLOCKWHERE USED

1 Isopropyl AlcoholTT-I-735 GRADE A

LOCAL PURCHASE 4000

2 Mixed Adhesive SetK+S POLYOLEFIN

K+S Industriebedarf GmbH

Steige 469436 SCHOEN-

RUNNSCHWANHEIMGermany

7000

TP 10001-1Nov 15/201235-21-14



INTRO 10001-1Nov 15/201235-21-14



1. General

This ILLUSTRATED PARTS LIST (IPL) of the CHEMICAL OXYGEN CONTAINER ASSEMBLY contains:

• an Introduction,

• an Alpha/Numerical Index,

• a Detailed Parts List.

the complete listing

2. Introduction

A. General

This introduction contains all necessary explanations about and informations how to use a.m. listedsections of this IPL. The introduction further contains:

• a list of abbreviations used in the detailed parts list,• a list of manufacturer codes together with manufacturer names and addresses.

B. Alpha/Numerical Index

The Alpha/Numerical Index shows a listing of part numbers of all items listed in the detailed partslist. They are listed in alpha-numerical sequence with a cross-reference to the related Fig. / ItemNumbers and show the units per assy. The order of precedence in beginning the part number arrangement at the extreme left-hand (first)position is as follows:

• letters A through Z (except 'O' to be considered as zero),• numerals 0 to 9.

For subsequent rows, the order is:

• a dash (-),• letters A through Z (except 'O' to be considered as zero),• numerals 0 to 9.

C. Detailed Parts List

The Detailed Parts List is used to identify parts and their relationship to each other. It contains oneor more Figures which contains each:

• an Illustration (as exploded view),• a list of all replaceable parts of shown or not shown on the Illustration.

INTRO 10001-2Nov 15/201235-21-14


(1) Column FIG. / ITEM

The first number in the first line of a page indicates the number of the figure illustrating thepart. The second number indicates the item number by which the part is identified on theillustration. A dash placed before the item number indicates that the part is not illustrated.

(2) Column PART NUMBER (PNR)

This column contains the original manufacturers part number. When standard partnumbers (e.g. AN,MS,NAS) are used, the standard part number is listed in this column.

(a) Explanation of End-Unit Part Numbers

The part numbers of the different models of the CHEMICAL OXYGEN CONTAIN-ER ASSEMBLY are to be identified as follows:

Example:

6 2 C 22 0 5 B 0 12 0005

MODIFICATION Code

DOOR ASSY COLOUR Code(Ref. Table 1001-5)

PROFILE COLOUR or Spec. Code(Ref. Table 1001-4) 0 = (NA), M

LANYARD LENGTH Code(Ref. Table 1001-3)

TUBE LENGTH Code(Ref. Table 1001-2)

INSTALLATION SIDE Code 0 = N/A, H = High Ceiling

MIN. DURATION OF OXYGENPRODUCTION (in minutes)

SYSTEMC = ChemicalG = Gaseous

QTY. OF MASKS

TYPE OF CONTAINER(Ref. Table 1001-1)

The a.m. part number identifies a TYPE VI CONTAINER, that has:

• A CHEMICAL SYSTEM with a min. DURATION of 22 MINUTES oxygen pro-duction.

• 2 MASKS with a TUBE LENGTH of 1874,0 mm (70.00 in.) and a LANYARDLENGTH of 685,8 mm (27.00 in.) with no flag.

INTRO 10001-3Nov 15/201235-21-14


• The DOOR ASSY is SOFT GREY coloured .

• The MODIFICATION Code is 0005.

Code Tables

Code Description

6 = TYPE VI)

TYPE of ContainerTable 10001-1/TABLE 35-21-14 -992-001-A01

Code Description

1 = 1219,2 mm (48.00 in.) (N/A)2 = 1524,0 mm (60.00 in.)3 = 1905,0 mm (75.00 in.) (N/A)4 = 2134,0 mm (84.00 in.) (N/A)5 = 1874,0 mm (70.00 in.6 = 2032,0 mm (80.00 in.

TUBE LENGTH CodeTable 10001-2/TABLE 35-21-14 -992-002-A01

Code Description

4 = 685,8 mm (27.00 in.) (N/A)5 = 495,3 mm (19.50 in.) (N/A)A = 330,2 mm (13.00 in.) (N/A)B = 431,8 mm (17.00 in.)C = 254,0 mm (10.00 in.)D = 889,0 mm (35.00 in.)N = 889,0 mm (35.00 in.)Q = 457,2 mm (18.00 in.))

LANYARD LENGTHTable 10001-3/TABLE 35-21-14 -992-003-A01

Code Colour

0 = (N/A) M = Type VI 4 Pers Container (15 or 22 Min.) equipped with 2 Oxygen Generators

PROFILE COLOUR / Special CodesTable 10001-4/TABLE 35-21-14 -992-004-A01

N/A - Not Applicable

INTRO 10001-4Nov 15/201235-21-14


CODE COLOUR

01 = WHITE DAWN 02 = WHITE 7362 03 = PEARL WHITE 04 = SMOKE WHITE 05 = SNOW WHITE 06 = WHITE MARBLE 07 = LIGHT GREY 08 = PEPPER DUST 09 = CREAM GREY 10 = FOG 11 = MEDIUM GREY 12 = SOFT GREY 13 = REGIA GREY 14 = WARM SHADOW 15 = SUNSET 16 = SOLID LIGHT GREY 17 = GREY (GE 1100-8104) 18 = LIGHT BEIGE 19 = TAN 20 = BEIGE ERITREA 21 = MARMOR BEIGE 22 = PORCELAIN 23 = CREAM 7390 24 = BEIGE 7363 25 = DARK BROWN 26 = ISABELL BEIGE 27 = BEIGE 467 28 = MOON BEAM 29 = MOON SHADOW 30 = WARM WHITE 31 = DOLPHIN 32 = GREY CLOUD 33 = LIGHT BEIGE 34 = TIN 35 = BEIGE 8703 36 = SHARK 37 = DAWN BEIGE 38 = HAZE 39 = SPRING 40 = PEARL WHITE 41 = DOVE GREY 42 = GREY 7802 43 = WHITE BEIGE 44 = CUSTOMER CODE 45 = SOFT SAND 46 = DREAM GREY 47 = SILVER 48 = WHITE CLOUD 49 = COOL GREY 5 50 = COOL GREY 3

COLOUR Code used on the END-UNIT, DOOR ASSY and TEST BUTTON PNRTable 10001-5/TABLE 35-21-14-992-005-A01

INTRO 10001-5Nov 15/201235-21-14


CODE COLOUR

51 = PARASOL BROWN 52 = GE705505 GREY(71ND) 53 = ROSEWOOD 54 = MALLORCA BLUE 55 = PARASOL BEIGE 56 = FOGGY 57 = TAUPE METALLIC 58 = Deleted 59 = CHAMPAGNE 60 = MOONBEAM 61 = GRAPHITE BLACK 62 = NEUTRAL BEIGE

COLOUR Code used on the END-UNIT, DOOR ASSY and TEST BUTTON PNRTable 10001-6/TABLE 35-21-14-992-005-A01 (cont’d)NOTE: When you order a part number which shows the letters XX (End-Unit,

Door Assy or Test Button PNR) these letters must be changed to theapplicable colour code number as set out in the a.m. Table 10001-5.

(3) Column AIRLINE STOCK NO.

This column is left blank for airline internal use.

(4) Column INDENTURE

(a) Indenture System

The indenture system shows the relationship of parts and assemblies to their nexthigher assemblies as follows:

(5) Column NOMENCLATURE

(a) It shows the description (keyword(s)) of the applicable PNR listed and givesinformation about the condition of a part (i.e. revised by:

IND NOMENCLATUREENT

1 Assembly1 Attaching Parts for Assembly2 Detail Parts for Assembly2 Sub-Assembly2 Attaching Parts for Sub-Assembly3 Detail Parts for Sub-Assembly3 Sub-Sub-Assembly3 Attaching Parts for Sub-Sub-Assembly4 Detail Parts for Sub-Sub Assembly

INTRO 10001-6Nov 15/201235-21-14


• a Service Bulletin/ (PRE or POST SB...),

• an Airline Engineering Bulletin (PRE or POST AEB...),

• superseded (SUPSD BY ITEM ..../SUPDS ITEM....) .....etc .

(b) Attaching Parts

The Attaching Parts are shown directly after the assembly or the part of it. Theyare listed under the same indenture number as the item they attach. To indicateattaching parts the words -ATTACHING PARTS- (located at the beginning of theparts listed) and three asterisks * * * (located at the end) are used.

(c) Vendor Code

Parts manufactured by companies other than B/E AEROSPACE SYSTEMS areidentified by an applicable vendor code that follows the nomenclature. Vendor codes are in accordance with the last issues of the Federal Supply Codesfor Manufacturers (FSCM) Handbook H4-1, H4-2, H4-3 and H4-4. Vendor Codes are identified by the letter (V.....) followed by the applicable FSCMCode. Standard parts such as AN, MS, etc. are not identified by a vendor code.

(6) Column USAGE CODE

The Usage Code links the part to highest assembly on the same figure. This is indicatedby a letter e.g. A,B,C, etc..If there are more than one main assembly with different item numbers the item numbermust precede the letter e.g. 1BDE. Is a part used on all assemblies this column is left blank.

(7) Column UNITS PER ASSY

This column contains the quantity of a part listed in the Detailed Parts List. Where thequantity of an assembly is more than one the breakdown parts will always be shown forone assembly only.For quantities which can not be specified correctly (e.g. bulk items) the letters 'AR' - 'AsRequired' (bulk items) is used in this column.For all main assemblies (end-units) and items listed for reference purposes the letters’RF’ - ReFerence are used.

D. How to use the Illustrated Parts List

(1) To find a Part with Known Part Number (PNR):

(a) Refer to the Numerical Index (NI) and find the PNR.

(b) Read across to the related Figure and Item Number.

(c) Refer to the Figure in the Parts List.

(d) Find the Item on the Illustration.

(2) To find a Part with Unknown PNR:

(a) Find the Illustration that shows the breakdown of the assembly.

(b) Find the part and make a note of the Item Number.

(c) Look in the Parts List related to the Illustration for the Item Number. This will tell you also the description and the PNR.

INTRO 10001-7Nov 15/201235-21-14


E. List of Abbreviations

The following abbreviations have been used in this IPL:

AR - As RequiredDET - DetailFIG - Figure IPL - Illustrated Parts ListINSTR - InstructionLH - Left HandMONTNG - MountingN/A - Not applicableNHA - Next Higher AssyNP - Not ProcurablePNR - Part NumberPRFLS - ProfilesRH - Right HandRF - ReferenceREQ - Required SB - Service BulletinSUPSD - SupersededSUPSDS - SupersedesTOT - Total

F. Suppliers Name and Code List

FSCM-CODE MANUFACTURER NAME AND ADDRESS

53655 SCOTT - AVIATIONA SCOTT TECHNOLOGIES COMPANY223 Erie StreetLANCASTER, NY 14086 - 9502USA

06383 PANDUIT CORPORATE HEADQUARTERS

17301 Ridgeland AvenueTinley ParkIL 60477USA

NI-ALPHA Page 1Nov 15/2012

PART NUMBER AIRLINE FIG. ITEM TTLSTOCK No. REQ

35-21-14


TASK 35-31-14-970-801-A01

3. Numerical Index / Alpha

DIN7-2M6X14A4 2 050 1

E33218-00 2 030A 2E60063-07 2 -190A 2E60151-00 1 120A 1

1A 120A 11B 120A 11C 120A 11D 120A 11E 120A 11F 120A 11G 120A 1

E60170-00 2 170A 6E60184-00 2 080A 2E60198-00 2 020A 2E60681-00 1B 063A 2

1B -063B 31B -063C 41C 063A 51C -063B 61C -063C 41E 063A 21E -063B 31E -063C 41F 063A 21F -063B 31G 063A 41G -063B 5

E61406-00 2 -090B 2E61457-00 1B 065A 2

1B -065B 31B -065C 41C 065A 51C -065B 61C -065C 41F 065A 21F -065B 31G 065A 41G -065B 5

E61457-00 1E 065A 21E -065B 31E -065C 4

E61485-00 1 010A 11A 010A 21D 010A 2

- ITEM NOT ILLUSTRATED



35-21-14


E61494-00 1B 010A 11C 010A 11C 010C 21E 010A 11G 010A 21G -010B 1

E62168-00 1D 110A 11E 110A 11F 110A 11G 110A 12 -001C RF

E62169-00 1D -110B 11E -110B 11F -110B 11G -110B 12 -001D RF

E62170-00 2 -130B 1E62171-00 2 -130C 1E62184-00 2 -010B 1E62185-00 2 -010C 1E62186-00 2 -010D 1E62236-00 1F -020A 1

1G -020A 21G -020B 1

E62290-00-0XX 2 -120B 1E62336-00 1F -020B 1

1G -020C 1E62480-02 2 070A 1E62483-01 2 140A 4E62484-03 2 160A 1E62484-04 2 -160B 1E62487-00 1 090A 1

1A 090A 11B 090A 11C 090A 11D 090A 11E 090A 11F 090A 11G 090A 1

E62490-10 2 200A 1E62492-00 2 110A 1E62493-02 1B -015B 1

1C -015B 11E -015B 11F -015B 11G 015C 1

E62494-03 1B 015A 11C 015A 1




35-21-14


E62494-03 (cont’d) 1C 015C 21E 015A 11F 015A 11G -015A 21G 015B 1

E62495-00 2 090A 2E62499-00 2 050A 1E62511-00 2 100A 1E62513-00 2 150A 1E62516-01 1 070A 1

1A 070A 11B 070A 11C 070A 11D 070A 11E 070A 11F 070A 11G 070A 1

E62517-00 2 105A 12 195A 1

E62521-00 2 -140B 4E62522-00 1 110A 1

1A 110A 11B 110A 11C 110A 12 -001A 1

E62523-00 1 -110B 11A -110B 11B -110B 11C -110B 12 -001B 1

E62524-00 2 -040A 1E62525-00 2 -010A 1E62533-00 1B -010B 1

1C -010B 11E -010B 11F 010A 11G 010C 1

E62576-00 1 -083A 11 083B 21A 083A 21B -083A 11B 083B 21C 083A 21D 083A 11D -083B 21E -083A 11E 083B 21F -083A 1




35-21-14


E62576-00 (cont’d) 1F 083B 21G 083A 2

E63047-00 1B 055A 21C 055A 21E 055A 21F 055A 21G 055A 21F 083B 21G 083A 2

E63047-00 1B 055A 21C 055A 21E 055A 21F 055A 21G 055A 2

E63236-00 1F 050A 11G 050A 1

E63320-00 1 -020A 11A -020A 11A -020D 21D -020A 1

E63321-01 1 050A 11A 050A 11D 050A 1

E63330-00 1 -020B 11A -020B 11D -020B 1

E63331-01 1 -050B 11A -050B 11D -050B 1

E63336-00 1F -050B 11G 050B 1

E63340-00 1 -020C 11A -020C 11D -020C 1

E63341-01 1 -050C 11A -050C 11D -050C 1

E63420-00 1B -020A 11C -020A 11C -020D 21E -020A 1

E63421-01 1B 050A 11C 050A 11E 050A 1

E63430-00 1B -020B 11C -020B 11E -020B 1

E63431-01 1B -050B 11C -050B 1




35-21-14


E63431-01 (cont’d) 1E -050B 1E63440-00 1B -020C 1

1C -020C 11E -020C 1

E63441-01 1B -050C 11C -050C 11E -050C 1

E63598-00-0047 1C -060X 4E63598-00-0056 1C -060Z 4E63598-00-0081 1E -061L 2

1E -061M 4E63598-00-0100 1 -061A 1

1 -061B 21 -061C 31 -061D 41A -060L 31A -060M 51A -060N 61B -061A 11B -061B 21B -061C 31B -061D 41C -060B 31C -060C 51C -060D 61D -061A 11D -061B 21D -061C 31D -061D 41E -061A 11E -061B 21E -061C 31E -061D 41F -060J 11F -060K 21F -060L 31G -060J 21G -060K 31G -060L 41G -060M 5

E63598-00-0106 1 -061E 11A -060P 21B -061E 11C -060R 21D -061E 11E -061E 11F -060M 11G -060N 1




35-21-14


E63598-00-0112 1 -061F 11 -061L 21 -061M 31 -061N 41A -060Q 21A -060U 41B -061F 11B -061L 21B -061M 31B -061N 41C -060S 21C -060W 41C -060Y 51D -061F 11D -061L 21D -061M 31D -061N 41E -061F 11E -061N 21E -061P 31E -061Q 41F -060N 11G -060P 2

E63598-00-0200 1 -061G 11 -061H 21 -061J 31 -061K 41A -060R 41A -060S 51A -060T 61B -061G 11B -061H 21B -061J 31B -061K 41C -060T 41C -060U 51C -060V 61D -061G 11D -061H 21D -061J 31D -061K 41E -061G 11E -061H 21E -061J 31E -061K 41F -060P 11F -060Q 21F -060R 31G -060Q 41G -060R 5




35-21-14


E697XX-00 2 -040A 1E699XX-00 2 120A 1E71401-00 1 040A 1

1A 040A 11B 040A 11D 040A 11E 040A 11F 040A 11G 040A 1

E74115-00 1 030A 11A 030A 11B 030A 11D 030A 11E 030A 11F 030A 11G 030A 1

E75098-00 1 100A 11A 100A 11B 100A 11C 100A 11E 100A 11F 100A 11G 100A 1




NI-ALPHA Page 8Nov 15/201235-21-14

NI-NUM Page 1Nov 15/2012


35-21-14


TASK 35-21-14-970-802-A01

4. Numerical Index / Numerical

289-601-924-100 1E -060L 21E -060M 4

289-601-924-113 1C -060K 4289-601-924-115 1A -060K 4

1C -060M 4289-601-924-46A 1 060A 1

1 -060B 21 -060C 31 -060D 41A 060A 31A 060B 51A -060C 61B 060A 11B -060B 21B -060C 31B -060D 41C 060A 31C 060B 51C -060C 61D 060A 11D -060B 21D -060C 31D -060D 41E 060A 11E -060B 21E -060C 31E -060D 41F 060A 11F -060B 21F -060C 31G 060A 21G -060B 31G -060C 41G -060D 5

289-601-924-49A 1 -060G 11 -060H 21 -060J 31 -060K 41B -060G 11B -060H 21B -060J 31B -060K 41D -060G 11D -060H 21D -060J 3




35-21-14


289-601-924-49A 1D -060K 41F -060F 11F -060G 21F -060H 3

289-601-924-50A 1A 060F 41A -060G 51A -060H 61C 060F 41C 060G 51C -060H 61G 060G 41G -060H 5

289-601-924-51A 1 -060E 11A -060D 21B -060E 11C -060D 21D -060E 11E -060E 11F -060D 11G -060E 2

289-601-924-52A 1 -060F 11 -060L 21 -060M 31 -060N 41A -060E 21A -060J 41B -060F 11B -060L 21B -060M 31B -060N 41C -060E 21C -060J 41C -060E 21D -060F 11D -060L 21D -060M 31D -060N 41E -060F 11E -060N 21E -060P 31E -060Q 41F -060E 11G -060F 2




35-21-14


62C15H6D0XX0005 1 -001D RF62C15H6D0XX0006 1D -001D RF62C15H6N0XX0005 1 -001C RF62C15H6N0XX0006 1D -001C RF62C1505B0XX0005 1 -001A RF62C1505B0XX0006 1D -001A RF62C1505Q0XX0005 1 -001B RF62C1505Q0XX0006 1D -001B RF62C1506D0XX0005 1 -001R RF62C1506D0XX0006 1D -001R RF62C1506K0XX0005 1 -001N RF62C1506K0XX0006 1D -001N RF

62C22H2C0XX0006 1E -001N RF62C22H6D0XX0005 1B -001D RF62C22H6D0XX0006 1E -001D RF62C22H6N0XX0005 1B -001C RF62C22H6N0XX0006 1E -001C RF62C2205B0XX0005 1B -001A RF62C2205B0XX0006 1E -001A RF62C2205Q0XX0005 1B -001B RF62C2205Q0XX0006 1E -001B RF62C2206D0XX0005 1B -001N RF62C2206D0XX0006 1E -001Q RF62C2206K0XX0005 1B -001R RF62C2206K0XX0006 1E -001T RF

62C36H6D0XX0006 1F -001D RF62C36HND0XX0006 1F -001C RF62C3605B0XX0006 1F -001A RF62C3605Q0XX0006 1F -001B RF

63C15H6D0XX0005 1 -001H RF63C15H6D0XX0006 1D -001H RF63C15H6N0XX0005 1 -001G RF63C15H6N0XX0006 1D -001G RF63C1505B0XX0005 1 -001E RF63C1505B0XX0006 1D -001E RF63C1505Q0XX0005 1 -001F RF63C1505Q0XX0006 1D -001F RF63C1506D0XX0005 1 -001S RF63C1506D0XX0006 1D -001S RF63C1506K0XX0005 1 -001P RF63C1506K0XX0006 1D -001P RF

63C22H6D0XX0005 1B -001H RF63C22H6D0XX0006 1E -001H RF63C22H6N0XX0005 1B -001G RF63C22H6N0XX0006 1E -001G RF




35-21-14


63C2205B0XX0005 1B -001E RF63C2205B0XX0006 1E -001E RF63C2205Q0XX0005 1B -001F RF63C2205Q0XX0006 1E -001F RF63C2206D0XX0005 1B -001P RF63C2206D0XX0006 1E -001R RF63C2206K0XX0005 1B -001S RF63C2206K0XX0006 1E -001U RF

63C36H6D0XX0006 1F -001H RF63C36H6N0XX0006 1F -001G RF63C3605B0XX0006 1F -001E RF63C3605Q0XX0006 1F -001F RF

64C15H6D0XX0005 1 -001M RF64C15H6D0XX0006 1D -001M RF64C15H6N0XX0005 1 -001L RF64C15H6N0XX0006 1D -001L RF64C15M6N0XX0006 1A -001T RF64C15M380XX0006 1A -001U RF64C1505B0XX0005 1 -001J RF64C1505B0XX0006 1D -001J RF64C1505Q0XX0005 1 -001K RF64C1505Q0XX0006 1D -001K RF64C1506D0XX0005 1 -001T RF64C1506D0XX0006 1D -001T RF64C1506K0XX0005 1 -001Q RF64C1506K0XX0006 1D -001Q RF64C1506NMXX0006 1A -001S RF(DELETED)

64C22H2C0XX0006 1E -001P RF64C22H6D0XX0005 1B -001M RF64C22H6D0XX0006 1E -001M RF64C22H6N0XX0005 1B -001L RF64C22H6N0XX0006 1E -001L RF64C22M310XX0006 1C -001T RF64C22M380XX0006 1C -001U RF64C22M6N0XX0006 1C -001V RF

64C2205B0XX0005 1B -001J RF64C2205B0XX0006 1E -001J RF64C2205Q0XX0005 1B -001K RF64C2205Q0XX0006 1E -001K RF64C2206D0XX0005 1B -001Q RF64C2206D0XX0006 1E -001S RF64C2206K0XX0005 1B -001T RF64C2206K0XX0006 1E -001V RF




35-21-14


64C2206NMXX0006 1C -001S RF(DELETED)

64C36H6D0XX0006 1G -001D RF64C36H6N0XX0006 1G -001C RF64C3605B0XX0006 1G -001A RF64C3605Q0XX0006 1G -001B RF

65C15H6D0XX0005 1A -001D RF65C15H6D0XX0006 1A -001M RF65C15H6N0XX0005 1A -001C RF65C15H6N0XX0006 1A -001L RF65C1505B0XX0005 1A -001A RF65C1505B0XX0006 1A -001J RF65C1505Q0XX0005 1A -001B RF65C1505Q0XX0006 1A -001K RF

65C22H6D0XX0005 1C -001D RF65C22H6D0XX0006 1C -001M RF65C22H6N0XX0005 1C -001C RF65C22H6N0XX0006 1C -001L RF65C2205B0XX0005 1C -001A RF65C2205B0XX0006 1C -001J RF65C2205Q0XX0005 1C -001B RF65C2205Q0XX0006 1C -001K RF65C2206K0XX0005 1C -001W RF65C2206K0XX0006 1C -001X RF

65C36H6D0XX0006 1G -001H RF65C36H6N0XX0006 1G -001G RF65C3605B0XX0006 1G -001E RF65C3605Q0XX0006 1G -001F RF

66C15H6D0XX0005 1A -001H RF66C15H6D0XX0006 1A -001R RF66C15H6N0XX0005 1A -001G RF66C15H6N0XX0006 1A -001Q RF66C1505B0XX0005 1A -001E RF66C1505B0XX0006 1A -001N RF66C1505Q0XX0005 1A -001F RF66C1505Q0XX0006 1A -001P RF

66C22H6D0XX0005 1C -001H RF66C22H6D0XX0006 1C -001R RF66C22H6N0XX0005 1C -001G RF66C22H6N0XX0006 1C -001Q RF66C2205B0XX0005 1C -001E RF66C2205B0XX0006 1C -001N RF66C2205Q0XX0005 1C -001F RF66C2205Q0XX0006 1C -001P RF




35-21-14


8712007 1 080A 21 085A 11A 080A 21A 085A 11B 080A 21B 085A 1

8712007 1C 080A 21C 085A 11D 080A 21D 085A 11E 080A 21E 085A 11F 080A 21F 085A 11G 080A 21G 085A 12 080A 82 080B 10


DPLNov 15/201235-21-14


DETAILED PARTS LIST

TASK 35-21-14-950-801-A015. Detailed Parts List

0Nov 15/201235-21-14


Subtask 35-21-14-950-001-A01A. IPL-Figure 1 (15 Min., 2, 3 and 4 masks, Version -0005)

Chemical Oxygen Container AssemblyFigure 1 /GRAPHIC 35-21-14-991-020-A01

1Nov 15/201235-21-14


IFIG. AIRLINE N USAGE UNITITEM PART NUMBER STOCK D NOMENCLATURE FROM PER

NUMBER E TO ASSYNT

1-001A 62C1505B0XX0005 1 CONTAINER ASSY,CHEMICAL A RF

OXYGEN,2 PERSON,TYPE VI-001B 62C1505Q0XX0005 1 CONTAINER ASSY,CHEMICAL B RF

OXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001C 62C15H6N0XX0005 1 CONTAINER ASSY,CHEMICAL C RFOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001D 62C15H6D0XX0005 1 CONTAINER ASSY,CHEMICAL D RFOXYGEN,2 PERSON,TYPE VI

-001E 63C1505B0XX0005 1 CONTAINER ASSY,CHEMICAL E RFOXYGEN,3 PERSON,TYPE V

-001F 63C1505Q0XX0005 1 CONTAINER ASSY,CHEMICAL F RFOXYGEN,3 PERSON,TYPE VI(WITH -PULL- FLAG)

-001G 63C15H6N0XX0005 1 CONTAINER ASSY,CHEMICAL G RFOXYGEN,3 PERSON,TYPE VI(WITH -PULL- FLAG)

-001H 63C15H6D0XX0005 1 CONTAINER ASSY,CHEMICAL H RFOXYGEN,3 PERSON,TYPE VI

-001J 64C1505B0XX0005 1 CONTAINER ASSY,CHEMICAL J RFOXYGEN,4 PERSON,TYPE VI

-001K 64C1505Q0XX0005 1 CONTAINER ASSY,CHEMICAL K RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001L 64C15H6N0XX0005 1 CONTAINER ASSY,CHEMICAL L RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001M 64C15H6D0XX0005 1 CONTAINER ASSY,CHEMICAL M RFOXYGEN,4 PERSON,TYPE VI

-001N 62C1506K0XX0005 1 CONTAINER ASSY,CHEMICAL N RFOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001P 63C1506K0XX0005 1 CONTAINER ASSY,CHEMICAL P RFOXYGEN,3 PERSON,TYPE VI(WITH -PULL- FLAG)

-001Q 64C1506K0XX0005 1 CONTAINER ASSY,CHEMICAL Q RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001R 62C1506D0XX0005 1 CONTAINER ASSY,CHEMICAL R RFOXYGEN,2 PERSON,TYPE VI

-001S 63C1506D0XX0005 1 CONTAINER ASSY,CHEMICAL S RFOXYGEN,3 PERSON,TYPE VI

- ITEM NOT ILLUSTRATED XX = INSERT COLOUR CODE (REF. TABLE 10001-5)

2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-001T 64C1506D0XX0005 1 CONTAINER ASSY,CHEMICAL T RF

OXYGEN,4 PERSON,TYPE VI 010A E61485-00 2 CLAMP 1 020A E63320-00 2 GENERATOR ASSY,OXYGEN ABCD 1

NR-020B E63330-00 2 GENERATOR ASSY,OXYGEN EFGH 1

PS-020C E63340-00 2 GENERATOR ASSY,OXYGEN JKLM 1

QT 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING- 1 050A E63321-01 3 GENERATOR,OXYGEN (NP) 20A 1-050B E63331-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63341-01 3 GENERATOR,OXYGEN (NP) 20C 1 060A 289-601-924-46A 2 MASK ASSY (V53655) B 1 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 61A)

-060B 289-601-924-46A 2 MASK ASSY (V53655) AF 2 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 61B)

-060C 289-601-924-46A 2 MASK ASSY (V53655) EK 3 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 61C)

-060D 289-601-924-46A 2 MASK ASSY (V53655) J 4 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 61D)

-060E 289-601-924-51A 2 MASK ASSY (V53655) BFK 1 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62640-01)(SUPSD BY ITEM 61E)

-060F 289-601-924-52A 2 MASK ASSY (V53655) CGL 1 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61F)

-060G 289-601-924-49A 2 MASK ASSY (V53655) C 1 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61G)


3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-060H 289-601-924-49A 2 MASK ASSY (V53655) DGR 2 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61H)

-060J 289-601-924-49A 2 MASK ASSY (V53655) HLS 3 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61J)

-060K 289-601-924-49A 2 MASK ASSY (V53655) MT 4 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61K)

-060L 289-601-924-52A 2 MASK ASSY (V53655) N 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61L)

-060M 289-601-924-52A 2 MASK ASSY (V53655) N 3 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60M)

-060N 289-601-924-52A 2 MASK ASSY (V53655) N 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60N)

-061A E63598-00-0100 2 MASK ASSY B 1 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60A)

-061B E63598-00-0100 2 MASK ASSY AF 2 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60B)

-061C E63598-00-0100 2 MASK ASSY EK 3 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60C)

-061D E63598-00-0100 2 MASK ASSY J 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)

-061E E63598-00-0106 2 MASK ASSY BFK 1 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60E)


4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-061F E63598-00-0112 2 MASK ASSY CGL 1 N

(WITH -PULL- FLAG)(SUPSDS ITEM 60F)

-061G E63598-00-0200 2 MASK ASSY C 1 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60G)

-061H E63598-00-0200 2 MASK ASSY DGR 2 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60H)

-061J E63598-00-0200 2 MASK ASSY HLS 3 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60J)

-061K E63598-00-0200 2 MASK ASSY MT 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60K)

-061L E63598-00-0112 2 MASK ASSY N 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 61L)

-061M E63598-00-0112 2 MASK ASSY P 3 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60M)

-061N E63598-00-0112 2 MASK ASSY Q 4 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60N)

070A E62516-01 2 COVER, DUST 1 ATTACHING PARTS 080A 8712007 2 TIE,CABLE 2

* * * -083A E62576-00 2 FIXATION,LANYARD ABCD 1

NPRS 083B E62576-00 2 FIXATION,LANYARD EFGH 2

JKLMQT

ATTACHING PARTS 085A 8712007 2 TIE,CABLE 1

* * * 090A E62487-00 2 LABLE -CAUTION- 1 100A E75098-00 2 LABLE -HOT- 1 110A E62522-00 2 CONTAINER ASSY (NP) ABEF 1

(SEE FIG. 2 FOR DET) JKNPQRST


5Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-110B E62523-00 2 CONTAINER ASSY (NP) CDGH 1

(SEE FIG. 2 FOR DET) LM 120A E60151-00 2 PLATE,IDENTIFICATION 1


A- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-B01B. IPL-Figure 1A (15 Min., 4 (64C15M..), 5 and 6 masks, Version -0005/-0006)

Chemical Oxygen Container AssemblyFigure 1A \GRAPHIC 35-21-14-991-020-B01

A- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1A-001A 65C1505B0XX0005 1 CONTAINER ASSY,CHEMICAL A RF

OXYGEN, 5 PERSON,TYPE VI-001B 65C1505Q0XX0005 1 CONTAINER ASSY,CHEMICAL B RF

OXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001C 65C15H6N0XX0005 1 CONTAINER ASSY,CHEMICAL C RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001D 65C15H6D0XX0005 1 CONTAINER ASSY,CHEMICAL D RFOXYGEN, 5 PERSON,TYPE VI

-001E 66C1505B0XX0005 1 CONTAINER ASSY,CHEMICAL E RFOXYGEN, 6 PERSON,TYPE VI

-001F 66C1505Q0XX0005 1 CONTAINER ASSY,CHEMICAL F RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001G 66C15H6N0XX0005 1 CONTAINER ASSY,CHEMICAL G RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001H 66C15H6D0XX0005 1 CONTAINER ASSY,CHEMICAL H RFOXYGEN, 6 PERSON,TYPE VI

-001J 65C1505B0XX0006 1 CONTAINER ASSY,CHEMICAL J RFOXYGEN, 5 PERSON,TYPE VI

-001K 65C1505Q0XX0006 1 CONTAINER ASSY,CHEMICAL K RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001L 65C15H6N0XX0006 1 CONTAINER ASSY,CHEMICAL L RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001M 65C15H6D0XX0006 1 CONTAINER ASSY,CHEMICAL M RFOXYGEN, 5 PERSON,TYPE VI

-001N 66C1505B0XX0006 1 CONTAINER ASSY,CHEMICAL N RFOXYGEN, 6 PERSON,TYPE VI

-001P 66C1505Q0XX0006 1 CONTAINER ASSY,CHEMICAL P RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001Q 66C15H6N0XX0006 1 CONTAINER ASSY,CHEMICAL Q RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001R 66C15H6D0XX0006 1 CONTAINER ASSY,CHEMICAL R RFOXYGEN, 6 PERSON,TYPE VI

-001S 64C1506NMXX0006 1 DELETED S RF D


A- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1A-001T 64C15M6N0XX0006 1 CONTAINER ASSY,CHEMICAL T RF


-001U 64C15M380XX0006 1 CONTAINER ASSY,CHEMICAL U RFOXYGEN, 4 PERSON,TYPE VI(WITH -PULL- FLAG)

010A E61485-00 2 CLAMP 2-020A E63320-00 2 GENERATOR ASSY,OXYGEN ABCD 1 R

JKLMEFGHNPQR

-020B E63330-00 2 GENERATOR ASSY,OXYGEN ABCD 1JKLM

-020C E63340-00 2 GENERATOR ASSY,OXYGEN EFGH 1NPQR

-020D E63320-00 2 GENERATOR ASSY,OXYGEN T 2 R 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING- 1 050A E63321-01 3 GENERATOR,OXYGEN (NP) 20A 1

20D 050B E63331-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63341-01 3 GENERATOR,OXYGEN (NP) 20C 1 060A 289-601-924-46A 2 MASK ASSY (V53655) BFKP 3 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60L)

-060B 289-601-924-46A 2 MASK ASSY (V53655) AJ 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60M)

-060C 289-601-924-46A 2 MASK ASSY (V53655) EN 6 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60N)

-060D 289-601-924-51A 2 MASK ASSY (V53655) BFKP 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62640-01)(SUPSD BY ITEM 60P)

-060E 289-601-924-52A 2 MASK ASSY (V53655) CGLQ 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60Q)


VoglerC

Hervorheben

U

A- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1A-060F 289-601-924-50A 2 MASK ASSY (V53655) CGLQ 4 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60R)

-060G 289-601-924-50A 2 MASK ASSY (V53655) DM 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60S)

-060H 289-601-924-50A 2 MASK ASSY (V53655) HR 6 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60T)

-060J 289-601-924-52A 2 MASK ASSY (V53655) T 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60U)

-060K 289-601-924-115 2 DELETED (V53655) D-060L 2E63598-00-0100 2 MASK ASSY BFKP 3 N

(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60A)

-060M E63598-00-0100 2 MASK ASSY AJ 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60B)

-060N E63598-00-0100 2 MASK ASSY EN 6 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60C)

-060P E63598-00-0106 2 MASK ASSY BFKP 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)

-060Q E63598-00-0112 2 MASK ASSY CGLQ 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60E)

-060R E63598-00-0200 2 MASK ASSY CGLQ 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60F)

-060S E63598-00-0200 2 MASK ASSY DM 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60G)

-060T E63598-00-0200 2 MASK ASSY HR 6 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60H)


A- 4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1A-060U E63598-00-0112 2 MASK ASSY T 4 N

(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60J)


* * * 083A E62576-00 2 FIXATION,LANYARD 2



(SEE FIG. 2 FOR DET)-110B E62523-00 2 CONTAINER ASSY (NP) CDGH 1

(SEE FIG. 2 FOR DET)-110C E62168-00 2 CONTAINER ASSY (NP) JKLM 1

(SEE FIG. 2 FOR DET) T-110D E62169-00 2 CONTAINER ASSY (NP) NPQR 1

(SEE FIG. 2 FOR DET) 120A E60151-00 2 PLATE,IDENTIFICATION 1


VoglerC

Notiz

-060V E63598-00-0056 Usage Code U UNIT 4


PAGE 10001A- 5Nov 15/201235-21-14


B- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-C01C. IPL-Figure 1B (22 Min., 2 to 4 masks, Version -0005)

Chemical Oxygen Container AssemblyFigure 1B \GRAPHIC 35-21-14-991-020-C01

B- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1B-001A 62C2205B0XX0005 1 CONTAINER ASSY,CHEMICAL A RF













-001N 62C2206D0XX0005 1 CONTAINER ASSY,CHEMICAL N RFOXYGEN,2 PERSON,TYPE VI

-001P 63C2206D0XX0005 1 CONTAINER ASSY,CHEMICAL P RFOXYGEN,3 PERSON,TYPE VI

-001Q 64C2206D0XX0005 1 CONTAINER ASSY,CHEMICAL Q RFOXYGEN,4 PERSON,TYPE VI

-001R 62C2206K0XX0005 1 CONTAINER ASSY,CHEMICAL R RFOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001S 63C2206K0XX0005 1 CONTAINER ASSY,CHEMICAL S RFOXYGEN,3 PERSON,TYPE VI(WITH -PULL- FLAG)

-001T 64C2206K0XX0005 1 CONTAINER ASSY,CHEMICAL T RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

- ITEM NOT ILLUSTRATED XX = INSERT COLOUR CODE (Ref. Table 10001-5)

B- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1B 010A E61494-00 2 CLAMP ABCD 1

NR-010B E62533-00 2 CLAMP EFGH 1

JKLMPQRS

T 015A E62494-03 2 SHIELD,THERMAL ABCD 1

NR-015B E62493-02 2 SHIELD,THERMAL EFGH 1

JKLMPQST

020A E63420-00 2 GENERATOR ASSY,OXYGEN ABCD 1NR

-020B E63430-00 2 GENERATOR ASSY,OXYGEN EFGH 1PS

-020C E63440-00 2 GENERATOR ASSY,OXYGEN JKLM 1QT

030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING - 1 050A E63421-01 3 GENERATOR,OXYGEN (NP) 20A 1-050B E63431-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63441-01 3 GENERATOR,OXYGEN (NP) 20C 1 055A E63047-00 2 TIE,CABLE 2 060A 289-601-924-46A 2 MASK ASSY (V53655) B 1 R







B- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1B-060F 289-601-924-52A 2 MASK ASSY (V53655) CGL 1 R

(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61F)


-060H 289-601-924-49A 2 MASK ASSY (V53655) DGR 2 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61H)




-060M 289-601-924-52A 2 MASK ASSY (V53655) P 3 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60M)

-060N 289-601-924-52A 2 MASK ASSY (V53655) Q 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61N)





B- 4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1B-061D E63598-00-0100 2 MASK ASSY J 4 N

(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)


-061F E63598-00-0112 2 MASK ASSY CGL 1 N(WITH -PULL- FLAG)(SUPSDS ITEM 60F)








063A E60681-00 2 TUBE,HIGH TEMPERATURE ABCD 2N

-063B E60681-00 2 TUBE,HIGH TEMPERATURE EFGH 3PR

-063C E60681-00 2 TUBE,HIGH TEMPERATURE JKLM 4QS

065A E61457-00 2 PIECE,CONNECTING ABCD 2N

-065B E61457-00 2 PIECE,CONNECTING EFGH 3PR


B- 5Nov 15/201235-21-14



NUMBER E TO ASSYNT

1B-065C E61457-00 2 PIECE,CONNECTING JKLM 4

QS 070A E62516-01 2 COVER, DUST 1 ATTACHING PARTS 080A 8712007 2 TIE,CABLE 2


N 083B E62576-00 2 FIXATION,LANYARD EFGH 2

JKLMPQRS




-110B E62523-00 2 CONTAINER ASSY (NP) CDGH 1(SEE FIG. 2 FOR DET) LM

120A E60151-00 2 PLATE,IDENTIFICATION 1


C- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-D01D. IPL-Figure 1C (22 Min., 4 (64C22M..), 5 and 6 masks, Version -0005/-0006)

Chemical Oxygen Container AssemblyFigure 1C \GRAPHIC 35-21-14-991-020-D01

C- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1C-001A 65C2205B0XX0005 1 CONTAINER ASSY,CHEMICAL A RF









-001J 65C2205B0XX0006 1 CONTAINER ASSY,CHEMICAL J RFOXYGEN, 5 PERSON,TYPE VI

-001K 65C2205Q0XX0006 1 CONTAINER ASSY,CHEMICAL K RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001L 65C22H6N0XX0006 1 CONTAINER ASSY,CHEMICAL L RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001M 65C22H6D0XX0006 1 CONTAINER ASSY,CHEMICAL M RFOXYGEN, 5 PERSON,TYPE VI

-001N 66C2205B0XX0006 1 CONTAINER ASSY,CHEMICAL N RFOXYGEN, 6 PERSON,TYPE VI

-001P 66C2205Q0XX0006 1 CONTAINER ASSY,CHEMICAL P RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001Q 66C22H6N0XX0006 1 CONTAINER ASSY,CHEMICAL Q RFOXYGEN, 6 PERSON,TYPE VI(WITH -PULL- FLAG)

-001R 66C22H6D0XX0006 1 CONTAINER ASSY,CHEMICAL R RFOXYGEN, 6 PERSON,TYPE VI

-001S 64C2206NMXX0006 1 DELETED S RF


C- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1C-001T 64C22M310XX0006 1 CONTAINER ASSY,CHEMICAL T RF


-001U 64C22M380XX0006 1 CONTAINER ASSY,CHEMICAL U RFOXYGEN, 4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001V 64C22M6N0XX0006 1 CONTAINER ASSY,CHEMICAL V RFOXYGEN, 4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001W 65C2206K0XX0005 1 CONTAINER ASSY,CHEMICAL W RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

-001X 65C2206K0XX0006 1 CONTAINER ASSY,CHEMICAL X RFOXYGEN, 5 PERSON,TYPE VI(WITH -PULL- FLAG)

010A E61494-00 2 CLAMP ABCD 1EFGH

JKLMNPQR

WX 010B E62533-00 2 CLAMP ABCD 1

EFGHJKLMNPQR

WX-010C E61494-00 2 CLAMP STUV 2 015A E62494-03 2 SHIELD,THERMAL ABCD 1

EFGHJKLMNPQR

WX-015B E62493-03 2 SHIELD,THERMAL ABCD 1

EFGHJKLMNPQR

WX-015C E62494-03 2 SHIELD,THERMAL TUV 2-020A E63420-00 2 GENERATOR ASSY,OXYGEN ABCD 1

EFGHJKLMNPQR

WX-020B E63430-00 2 GENERATOR ASSY,OXYGEN ABCD 1

JKLMWX


C- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1C-020C E63440-00 2 GENERATOR ASSY,OXYGEN EFGH 1

NPQR-020D E63420-00 2 GENERATOR ASSY,OXYGEN TUV 2 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING- 1 050A E63421-01 3 GENERATOR,OXYGEN (NP) 20A 1

20D-050B E63431-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63441-01 3 GENERATOR,OXYGEN (NP) 20C 1 055A E63047-00 2 TIE,CABLE 4 060A 289-601-924-46A 2 MASK ASSY (V53655) BFKP 3 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60N)

-060B 289-601-924-46A 2 MASK ASSY (V53655) AJ 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60P)

-060C 289-601-924-46A 2 MASK ASSY (V53655) EN 6 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60Q)

-060D 289-601-924-51A 2 MASK ASSY (V53655) BFKP 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62640-01)(SUPSD BY ITEM 60R)

-060E 289-601-924-52A 2 MASK ASSY (V53655) CGLQ 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60S)

-060F 289-601-924-50A 2 MASK ASSY (V53655) CGLQ 4 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60T)

-060G 289-601-924-50A 2 MASK ASSY (V53655) DM 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60U)

-060H 289-601-924-50A 2 MASK ASSY (V53655) HR 6 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60V)


C- 4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1C-060J 289-601-924-52A 2 MASK ASSY (V53655) V 4 R

(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60W)

-060K 289-601-924-113 2 MASK ASSY (V53655) T 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E60549-01)(SUPSD BY ITEM 60X)

-060L 289-601-924-52A 2 MASK ASSY (V53655) WX 5 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60Y

-060M 289-601-924-115 2 MASK ASSY (V53655) U 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E61438-01)(SUPSD BY ITEM 60Z)

-060N 2E63598-00-0100 2 MASK ASSY BFKP 3 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60A)

-060P E63598-00-0100 2 MASK ASSY AJ 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60B)

-060Q E63598-00-0100 2 MASK ASSY EN 6 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60C)

-060R E63598-00-0106 2 MASK ASSY BFKP 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)

-060S E63598-00-0112 2 MASK ASSY CGLQ 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60E)

-060T E63598-00-0200 2 MASK ASSY CGLQ 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60F)

-060U E63598-00-0200 2 MASK ASSY DM 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60G)


C- 5Nov 15/201235-21-14



NUMBER E TO ASSYNT

1A-060V E63598-00-0200 2 MASK ASSY HR 6 N

(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60H)

-060W E63598-00-0112 2 MASK ASSY V 4 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60J)

-060X E63598-00-0047 2 MASK ASSY T 4 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60K)

-060Y E63598-00-0112 2 MASK ASSY (V53655) WX 5 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60L)

-060Z E63598-00-0056 2 MASK ASSY (V53655) U 4 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60M)

063A E60681-00 2 TUBE,HIGH TEMPERATURE ABCD 5JKLMWX

-063B E60681-00 2 TUBE,HIGH TEMPERATURE EFGH 6NPQR

-063C E60681-00 2 TUBE,HIGH TEMPERATURE TUV 4 065A E61457-00 2 PIECE,CONNECTING ABCD 5

JKLMWX

-065B E61457-00 2 PIECE,CONNECTING EFGH 6NPQR

-065C E61457-00 2 PIECE,CONNECTING TUV 4 070A E62516-01 2 COVER, DUST 1 ATTACHING PARTS 080A 8712007 2 TIE,CABLE 2



* * * 090A E62487-00 2 LABLE -CAUTION- 1-100A E75098-00 2 LABLE -HOT- 1 110A E62522-00 2 CONTAINER ASSY (NP) ABEF 1

(SEE FIG. 2 FOR DET) W


C- 6Nov 15/201235-21-14



NUMBER E TO ASSYNT

1C-110B E62523-00 2 CONTAINER ASSY (NP) CDGH 1

(SEE FIG. 2 FOR DET) 110C E62168-00 2 CONTAINER ASSY (NP) JKLM 1

(SEE FIG. 2 FOR DET) TUVX

-110D E62169-00 2 CONTAINER ASSY (NP) NPQR 1(SEE FIG. 2 FOR DET)

120A E60151-00 2 PLATE,IDENTIFICATION 1




PAGE 10001C- 7Nov 15/201235-21-14

D- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-E01E. IPL-Figure 1D (15 Min., 2 to 4 masks, Version -0006)

Chemical Oxygen Container AssemblyFigure 1D \GRAPHIC 35-21-14-991-020-E01

D- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1D-001A 62C1505B0XX0006 1 CONTAINER ASSY,CHEMICAL A RF













-001N 62C1506K0XX0006 1 CONTAINER ASSY,CHEMICAL N RF NOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001P 63C1506K0XX0006 1 CONTAINER ASSY,CHEMICAL P RF NOXYGEN,3 PERSON,TYPE VI(WITH -PULL- FLAG)

-001Q 64C1506K0XX0006 1 CONTAINER ASSY,CHEMICAL Q RF NOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001R 62C1506D0XX0006 1 CONTAINER ASSY,CHEMICAL R RF NOXYGEN,2 PERSON,TYPE VI

-001S 63C1506D0XX0006 1 CONTAINER ASSY,CHEMICAL S RF NOXYGEN,3 PERSON,TYPE VI

-001T 64C1506D0XX0006 1 CONTAINER ASSY,CHEMICAL T RF NOXYGEN,4 PERSON,TYPE VI


D- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1D 010A E61485-00 2 CLAMP 1 020A E63320-00 2 GENERATOR ASSY,OXYGEN ABCD 1 R

NR-020B E63330-00 2 GENERATOR ASSY,OXYGEN EFGH 1 R

PS-020C E63340-00 2 GENERATOR ASSY,OXYGEN JKLM 1 R

QT 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING- 1 050A E63321-01 3 GENERATOR,OXYGEN (NP) 20A 1-050B E63331-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63341-01 3 GENERATOR,OXYGEN (NP) 20C 1 060A 289-601-924-46A 2 MASK ASSY (V53655) B 1 R









D- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-060H 289-601-924-49A 2 MASK ASSY (V53655) DGR 2 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61H)




-060M 289-601-924-52A 2 MASK ASSY (V53655) P 3 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61M)

-060N 289-601-924-52A 2 MASK ASSY (V53655) Q 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61N)







D- 4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1-061F E63598-00-0112 2 MASK ASSY CGL 1 N

(WITH -PULL- FLAG)(SUPSDS ITEM 60F)










NR 083B E62576-00 2 FIXATION,LANYARD EFGH 2

JKLMQT

085A 8712007 2 TIE,CABLE NPQ 1* * *

090A E62487-00 2 LABLE -CAUTION- 1 100A E75098-00 2 LABLE -HOT- 1 110A E62168-00 2 CONTAINER ASSY (NP) ABEF 1



D- 5Nov 15/201235-21-14



NUMBER E TO ASSYNT

1D-110B E62169-00 2 CONTAINER ASSY (NP) CDGH 1

(SEE FIG. 2 FOR DET) LM 120A E60151-00 2 PLATE,IDENTIFICATION 1


E- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-F01F. IPL-Figure 1E (22 Min., 2 to 4 masks, Version -0006)

Chemical Oxygen Container AssemblyFigure 1E \GRAPHIC 35-21-14-991-020-F01

E- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-001A 62C2205B0XX0006 1 CONTAINER ASSY,CHEMICAL A RF













-001N 62C22H2C0XX0006 1 CONTAINER ASSY,CHEMICAL N RFOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)

-001P 64C22H2C0XX0006 1 CONTAINER ASSY,CHEMICAL P RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

-001Q 62C2206D0XX0006 1 CONTAINER ASSY,CHEMICAL Q RFOXYGEN,2 PERSON,TYPE VI

-001R 63C2206D0XX0006 1 CONTAINER ASSY,CHEMICAL R RFOXYGEN,3 PERSON,TYPE VI

-001S 64C2206D0XX0006 1 CONTAINER ASSY,CHEMICAL S RFOXYGEN,4 PERSON,TYPE VI

-001T 62C2206K0XX0006 1 CONTAINER ASSY,CHEMICAL T RFOXYGEN,2 PERSON,TYPE VI(WITH -PULL- FLAG)


E- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-001U 63C2206K0XX0006 1 CONTAINER ASSY,CHEMICAL U RF


-001V 64C2206K0XX0006 1 CONTAINER ASSY,CHEMICAL V RFOXYGEN,4 PERSON,TYPE VI(WITH -PULL- FLAG)

010A E61494-00 2 CLAMP ABCD 1NQT

-010B E62533-00 2 CLAMP EFGH 1JKLMPRSU

V 015A E62494-03 2 SHIELD,THERMAL ABCD 1

NQT-015B E62493-02 2 SHIELD,THERMAL EFGH 1

JKLMPRSU

V-020A E63420-00 2 GENERATOR ASSY,OXYGEN ABCD 1

NQT-020B E63430-00 2 GENERATOR ASSY,OXYGEN EFGH 1

RU-020C E63440-00 2 GENERATOR ASSY,OXYGEN JKLM 1

PSV 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING - 1 050A E63421-01 3 GENERATOR,OXYGEN (NP) 20A 1-050B E63431-01 3 GENERATOR,OXYGEN (NP) 20B 1-050C E63441-01 3 GENERATOR,OXYGEN (NP) 20C 1 055A E63047-00 2 TIE,CABLE 2 060A 289-601-924-46A 2 MASK ASSY (V53655) B 1 R





E- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-060D 289-601-924-46A 2 MASK ASSY (V53655) J 4 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 61D)




-060H 289-601-924-49A 2 MASK ASSY (V53655) DGQ 2 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61H)

-060J 289-601-924-49A 2 MASK ASSY (V53655) HLR 3 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61J)

-060K 289-601-924-49A 2 MASK ASSY (V53655) MS 4 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 61K)

-060L 289-601-924-100 2 MASK ASSY (V53655) N 2 N(SEE CMM 35-21-87 FOR DET)(B/E PNR E62467-01)(SUPSD BY ITEM 61L)

-060M 289-601-924-100 2 MASK ASSY (V53655) P 4 N(SEE CMM 35-21-87 FOR DET)(B/E PNR E62467-01)(SUPSD BY ITEM 61M)

-060N 289-601-924-52A 2 MASK ASSY (V53655) T 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61N)


E- 4Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-060P 289-601-924-52A 2 MASK ASSY (V53655) U 3 R

(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60P)

-060Q 289-601-924-52A 2 MASK ASSY (V53655) V 4 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 61Q)






-061F E63598-00-0112 2 MASK ASSY CGL 1 N(WITH -PULL- FLAG)(SUPSDS ITEM 60F)





-061L E63598-00-0081 2 MASK ASSY N 2 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60L)


E- 5Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-061M E63598-00-0081 2 MASK ASSY P 4 N

(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60M)

-061N E63598-00-0112 2 MASK ASSY T 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60N)

-061P E63598-00-0112 2 MASK ASSY U 3 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60P)

-061Q E63598-00-0112 2 MASK ASSY V 4 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60Q)

063A E60681-00 2 TUBE,HIGH TEMPERATURE ABCD 2NQT

-063B E60681-00 2 TUBE,HIGH TEMPERATURE EFGH 3RU

-063C E60681-00 2 TUBE,HIGH TEMPERATURE JKLM 4PSV

065A E61457-00 2 PIECE,CONNECTING ABCD 2NQT

-065B E61457-00 2 PIECE,CONNECTING EFGH 3RU

-065C E61457-00 2 PIECE,CONNECTING JKLM 4PSV



NQRTU

083B E62576-00 2 FIXATION,LANYARD EFGH 2JKLMPSV



(SEE FIG. 2 FOR DET) JKQRSTUV


E- 6Nov 15/201235-21-14



NUMBER E TO ASSYNT

1E-110B E62169-00 2 CONTAINER ASSY (NP) CDGH 1

(SEE FIG. 2 FOR DET) LMNP 120A E60151-00 2 PLATE,IDENTIFICATION 1




PAGE 10001E- 7Nov 15/201235-21-14

F- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-F01G. IPL-Figure 1F (36 Min., 2 and 3 masks, Version -0006)

Chemical Oxygen Container AssemblyFigure 1F \GRAPHIC 35-21-14-991-020-F01

F- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1F-001A 62C3605B0XX0006 1 CONTAINER ASSY,CHEMICAL A RF









010A E62533-00 2 CLAMP 1 015A E62494-03 2 SHIELD,THERMAL ABCD 1-015B E62493-02 2 SHIELD,THERMAL EFGH 1-020A E62236-00 2 GENERATOR ASSY,OXYGEN ABCD 1-020B E62336-00 2 GENERATOR ASSY,OXYGEN EFGH 1 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING - 1 050A E63236-00 3 GENERATOR,OXYGEN (NP) 20A 1-050B E63336-00 3 GENERATOR,OXYGEN (NP) 20B 1 055A E63047-00 2 TIE,CABLE 2 060A 279-601-924-46A 2 MASK ASSY (V53655) B 1 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60J)

-060B 279-601-924-46A 2 MASK ASSY (V53655) AF 2 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60K)

-060C 289-601-924-46A 2 MASK ASSY (V53655) EK 3 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60L)


HeinsD

Durchstreichen

HeinsD

Ersatztext

E63237-00

HeinsD

Durchstreichen

HeinsD

Ersatztext

E63337-00

F- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1F-060D 289-601-924-51A 2 MASK ASSY (V53655) BFK 1 R

(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62640-01)(SUPSD BY ITEM 60M)

-060E 289-601-924-52A 2 MASK ASSY (V53655) DH 1 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60N)

-060F 289-601-924-49A 2 MASK ASSY (V53655) C 1 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 60P)

-060G 289-601-924-49A 2 MASK ASSY (V53655) DG 2 RSEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 60Q)

-060H 289-601-924-49A 2 MASK ASSY (V53655) H 3 RSEE CMM 35-21-87 FOR DET)(B/E PNR E61632-01)(SUPSD BY ITEM 60R)

-060J E63598-00-0100 2 MASK ASSY B 1 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60A)

-060K E63598-00-0100 2 MASK ASSY AF 2 N(SEE CMM 35-25-01 FOR DET)(SUPSD BY ITEM 60B)

-060L E63598-00-0100 2 MASK ASSY EK 3 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60C)

-060M E63598-00-0106 2 MASK ASSY BFK 1 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)

-060N E63598-00-0112 2 MASK ASSY DH 1 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60E)

-060P E63598-00-0200 2 MASK ASSY ) C 1 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60F)

-060Q E63598-00-0200 2 MASK ASSY DG 2 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60G)


F- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1F-060R E63598-00-0200 2 MASK ASSY H 3 N

(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60H)

063A E60681-00 2 TUBE,HIGH TEMPERATURE ABCD 2-063B E60681-00 2 TUBE,HIGH TEMPERATURE EFGH 3 065A E61457-00 2 PIECE,CONNECTING ABCD 2-065B E61457-00 2 PIECE,CONNECTING EFGH 3 070A E62516-01 2 COVER, DUST 1 ATTACHING PARTS 080A 8712007 2 TIE,CABLE 2

* * * -083A E62576-00 2 FIXATION,LANYARD ABCD 1 083B E62576-00 2 FIXATION,LANYARD EFGH 2






G- 0Nov 15/201235-21-14


Subtask 35-21-14-950-001-D01H. IPL-Figure 1G (36 Min., 4 and 5 masks, Version -0006)

Chemical Oxygen Container AssemblyFigure 1G \GRAPHIC 35-21-14-991-020-D01

G- 1Nov 15/201235-21-14



NUMBER E TO ASSYNT

1G-001A 64C3605B0XX0006 1 CONTAINER ASSY,CHEMICAL A RF









-010A E61494-00 2 CLAMP ABCD 2 010B E61494-00 2 CLAMP EFGH 1 010C E62533-00 2 CLAMP EFGH 1-015A E62494-03 2 SHIELD,THERMAL ABCD 2 015B E62494-03 2 SHIELD,THERMAL EFGH 1 015C E62493-02 2 SHIELD,THERMAL EFGH 1 020A E62236-00 2 GENERATOR ASSY,OXYGEN ABCD 2-020B E62236-00 2 GENERATOR ASSY,OXYGEN EFGH 1-020C E62336-00 2 GENERATOR ASSY,OXYGEN EFGH 1 030A E74115-00 3 PIN,RELEASE 1 040A E71401-00 3 FLAG ASSY -WARNING- 1 050A E63236-00 3 GENERATOR,OXYGEN (NP) 20A 1

20B 050B E63336-00 3 GENERATOR,OXYGEN (NP) 20C 1 055A E63047-00 2 TIE,CABLE 4 060A 279-601-924-46A 2 MASK ASSY (V53655) BC 2 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60J)

-060B 279-601-924-46A 2 MASK ASSY (V53655) FG 3 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60K)


HeinsD

Durchstreichen

HeinsD

Ersatztext

E63237-00

HeinsD

Durchstreichen

HeinsD

Ersatztext

E63337-00

HeinsD

Durchstreichen

HeinsD

Ersatztext

E63237-00

G- 2Nov 15/201235-21-14



NUMBER E TO ASSYNT

1G-060C 289-601-924-46A 2 MASK ASSY (V53655) A 4 R

(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60L)

-060D 289-601-924-46A 2 MASK ASSY (V53655) E 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61635-01)(SUPSD BY ITEM 60M)

-060E 289-601-924-51A 2 MASK ASSY (V53655) BF 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62640-01)(SUPSD BY ITEM 60N)

-060F 289-601-924-52A 2 MASK ASSY (V53655) CG 2 R(WITH -PULL- FLAG)(SEE CMM 35-21-87 FOR DET)(B/E PNR E62641-01)(SUPSD BY ITEM 60P)

-060G 289-601-924-50A 2 MASK ASSY (V53655) D 4 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60Q)

-060H 289-601-924-50A 2 MASK ASSY (V53655) H 5 R(SEE CMM 35-21-87 FOR DET)(B/E PNR E61634-01)(SUPSD BY ITEM 60R)

-060J E63598-00-0100 2 MASK ASSY BC 2 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60A)

-060K E63598-00-0100 2 MASK ASSY FG 3 N(SEE CMM 35-25-01 FOR DET)(SUPSD BY ITEM 60B)

-060L E63598-00-0100 2 MASK ASSY A 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60C)

-060M E63598-00-0100 2 MASK ASSY E 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60D)

-060N E63598-00-0106 2 MASK ASSY BF 2 N(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60E)


G- 3Nov 15/201235-21-14



NUMBER E TO ASSYNT

1G-060P E63598-00-0112 2 MASK ASSY CG 2 N

(WITH -PULL- FLAG)(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60F)

-060Q E63598-00-0200 2 MASK ASSY ) D 4 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60G)

-060R E63598-00-0200 2 MASK ASSY H 5 N(SEE CMM 35-25-01 FOR DET)(SUPSDS ITEM 60H)

063A E60681-00 2 TUBE,HIGH TEMPERATURE ABCD 4-063B E60681-00 2 TUBE,HIGH TEMPERATURE EFGH 5 065A E61457-00 2 PIECE,CONNECTING ABCD 5-065B E61457-00 2 PIECE,CONNECTING EFGH 6 070A E62516-01 2 COVER, DUST 1 ATTACHING PARTS 080A 8712007 2 TIE,CABLE 2



* * * 090A E62487-00 2 LABLE -CAUTION- 1-100A E75098-00 2 LABLE -HOT- 1 110A E62168-00 2 CONTAINER ASSY (NP) ABEF 1




0Nov 15/201235-21-14


Subtask 35-21-14-950-002-A01I. IPL-Figure 2 (Container Assy)

Chemical Oxygen Container AssemblyFigure 2 \GRAPHIC 35-21-14-991-021-A01

1Nov 15/201235-21-14



NUMBER E TO ASSYNT

2-001A E62522-00 1 CONTAINER ASSY A RF

(SEE FIG. 1 TO 1C FOR NHA)-001B E62523-00 1 CONTAINER ASSY B RF

(SEE FIG. 1 TO 1C FOR NHA)-001C E62168-00 1 CONTAINER ASSY C RF R

(SEE FIG. 1A,1C TO 1G FOR NHA)-001D E62169-00 1 CONTAINER ASSY D RF R

(SEE FIG. 1A,1C TO 1G FOR NHA)-010A E62525-00 2 DOOR ASSY (NP) A 1-010B E62184-00 2 DOOR ASSY (NP) B 1-010C E62185-00 2 DOOR ASSY (NP) C 1-010D E62186-00 2 DOOR ASSY (NP) D 1

ATTACHING PARTS 020A E60198-00 2 WASHER,LOCKING AB 2-020A E60056-00 2 WASHER,LOCKING CD 2 030A E33218-00 2 PIN 2

* * *-040A E697XX-00 3 BUTTON,TEST 1 050A DIN7-2M6X14A4 4 PIN 1 060A E62499-00 4 LABEL,TEST,SELF-ADHESIVE 1 070A E62480-02 4 BUTTON (NP) 1 080A E60184-00 3 BOLT,DOOR LOCKING 2 090A E62495-00 3 SUPPORT,BOLT 010A 2

010B-090B E61406-00 3 SUPPORT,BOLT 010C 2

010D 100A E62511-00 3 PROFILE, LIGHT SHIELD, L=0,6 M 010B 1

(23.6 IN.) 010D 105A E62517-00 3 PROFILE, LIGHT SHIELD, L=0,6 M 010D 1

(23.6 IN.) 110A E62492-00 3 LABEL,INSTALLATION INSTRUC- 1

TION, (TO BE ORDERED WITH THE

APPLICABLE END-ITEM PNR 120A E699XX-00 3 DOOR 010A 1

010B-120B E62290-00-0XX 3 DOOR 010C 1 R

010D-130A E62524-00 2 BOX ASSY (NP) A 1-130B E62170-00 2 BOX ASSY (NP) B 1-130C E62171-00 2 BOX ASSY (NP) CD 1 140A E62483-01 3 HINGE,FIXATION 130A 4

130B-140B E62521-00 3 HINGE,FIXATION 130C 4


2Nov 15/201235-21-14



NUMBER E TO ASSYNT

2ATTACHING PARTS

150A E62513-00 3 CLASP 1* * *

160A E62484-03 3 LATCH ASSY,DOUBLE 130A 1130B

-160B E62484-04 3 LATCH ASSY,DOUBLE 1 ATTACHING PARTS 170A E60170-00 3 SCREW 6 180A 8712007 3 TIE,CABLE 130A 8

130B-180B 8712007 3 TIE,CABLE 130C 10

* * *-190A E60063-07 4 LATCH ASSY (NP) 2

(BUY NHA) 195A E62517-00 3 PROFILE, LIGHT SHIELD; L=0,6 M 130B 1

(23.6 IN.) 200A E62490-10 3 STRUCTURE,BOX 1


Nov 15/201235-21-14


SPECIAL PROCEDURES

TASK 35-21-14-540-801-A011. Unpacking and Preparation before Installation on Aircraft

A. General

WARNING: STRICTLY OBEY THE PROCEDURES FOR USE OF OXYGEN EQUIPMENT.DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS MADE FROMPETROL IN THE WORKING AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) The removal of the WARNING FLAG ASSY is necessary to make the chemical oxygencontainer assembly serviceable for operation.






• Specification IATA UN3356/5.1• DOT’s Hazardous Materials Regulations HMR 49CFR...• Material Safety Data Sheet (MSDS)

C. Job Set-up

(1) Refer to the ILLUSTRATED PARTS LIST for FIGURE / ITEM Numbers.Cross-references to parts located in figures, other than referenced in the heading, areidentified by their IPL-Figure / Item No. e.g. (3-30A).

Subtask 35-21-14-540-001-A01D. Unpacking of the Chemical Container Assy


(1) Carefully cut off the self-adhesive tape of the cardboard box PNR E62655-00 and remove:

• the cardboard filler plate PNR E62657-00,• the plastic bag PNR 8710071 with the oxygen container.

REFERENCE QTY NAME

NONE

Nov 15/201235-21-14


(2) Very carefully cut off the plastic bag PNR 8710071 and remove the oxygen container.

(3) Keep the packaging materials stored for reshipping. Because a reshipping of a chemicalcontainer is only possible in the approved original manufacturer- or otherwise certified/approved packaging.

Subtask 35-21-31-090-002-A01E. Preparation before Installation on Aircraft (See IPL-Fig. 1 to 1E)

CAUTION: DO THE OPERATIONS ON A SOFT, CLEAN WORK SURFACE TO PREVENT DAMAGETO THE COMPONENTS.

(1) Put the oxygen container with its door assy on a clean lint-free soft-cloth so that the testoxygen generator assy is in front of you.

CAUTION: MAKE SURE THAT YOU DO NOT PULL THE MASK LANYARDS. AN ACCIDENTAL PULL CAN REMOVE THE RELEASE PIN (30) OF THE OXY-GEN GENERATOR ASSY (20) AND START THE OXYGEN FLOW WHICHCANNOT BE STOPPED. THIS MAKES THE OXYGEN GENERATOR ASSY (20)UNSERVICEABLE.

(2) Put the mask lanyards away from the warning flag assy (40).

(3) Carefully pull the warning flag of the warning flag assy (40) so that its safety pin removesfrom the firing pin (See Fig. 11001).

Removal of the Warning Flag AssyFigure 11001 \GRAPHIC 35-21-13-991-022-A01

(4) If necessary turn the release pin (30) so that its eyelet is in line with the mask lanyards.

(5) Now the chemical oxygen container is ready for the installation on the aircraft.

Nov 15/201235-21-14


TASK 35-21-14-500-801-A012. Handling Procedure how to discard a not used Chemical Oxygen Generator

A. General

The chemical oxygen generator has a stainless steel housing filled with Sodium Chlorate(NACLO3). It has a release pin that, if removed, starts the oxygen flow.The chemical reaction within the chemical oxygen generator is as follows:

• Fundamental reaction: NaCl03 –> NaCl + 372O2

• Heat generating reaction: Na2O + 1/2 O2 –> Na2O2 + Heat

• Chlorine absorption reaction: Na2O2 + Cl2 –> 2NaCl + O2




C. Job Set-up


WARNING: MAKE SURE THAT THE WORKING ROOM IS WELL VENTILATED AND HAVEA GOOD FLOW OF AIR. THIS IS NECESSARY BECAUSE THE OXYGENQUANTITY OF THE AIR WILL BE INCREASED.

WARNING: MAKE SURE THAT THERE IS NO FLAMMABLE MATERIAL IN THE WORK AREANEXT TO THE GENERATOR. YOU CAN CAUSE A DANGEROUS FIRE HAZARD

(1) Read the applicable Specifications of the international regulations (IATA, HMR 49CFR...)how to handle oxygen equipment, before you start to discard a Chemical Oxygen Gener-ator.

Subtask 35-21-14-500-001-A01D. Discard a not used Chemical Oxygen Generator

(1) Remove the oxygen generator from the container assy as specified in section DISASSEM-BLY of this manual.

(2) Put the oxygen generator on a clean table that has a non flammable surface.Make sure that there is no flammable material next to the oxygen generator.

CAUTION: DO NOT TOUCH THE OXYGEN GENERATOR DURING OXYGEN PRODUC-TION.IT GETS VERY HOT THROUGH REACTION OF ITS INNER CHEMICAL MATE-RIALS. YOU CAN BURN YOUR SKIN.

(3) Pull out the release pin of the oxygen generator. This starts the production of oxygen.

Nov 15/201235-21-14


(4) Let the oxygen generator cool after it has been burned out.

(5) Put the oxygen generator into a container (barrel) filled with 200 ltr (52.84 US Gal). Thisdissolves chemical remaining.

(6) Measure the pH value of the water. It should have a neutral solution (pH = 7).If necessary, add some common acid to neutralize the basic.

(7) Remove the oxygen generator from the container (barrel) and let it dry in the air.

NOTE: The ingredients of the oxygen generator are now chemically neutral.Chemical remaining of the oxygen generator are: - Sodium Chloride (NaCl),- Silicate.

Mechanical remaining are: - Stainless steel, - Fibre material.

(8) Discard the neutralized oxygen generator in reference to the regional regulations, or ask:

B/E Aerospace Systems GmbHProduct Support

Phone: #49/451/4093 2976Fax: #49/451/4093 4488

to give support or information.

Nov 15/201235-21-14


STORAGE (INCLUDING TRANSPORTATION)

TASK 35-21-14-500-801-A011. Storage and Shipping Instructions

A. General

WARNING: STRICTLY OBEY THE PROCEDURES FOR STORAGE AND SHIPMENT OFOXIDIZERS AS SPECIFIED IN THE:

- INTERNATIONAL AIR TRANSPORT AS SO CATION SPECIFICATION (IATA)UN3356/5.1.,

- DOT’s HAZARDOUS MATERIALS REGULATIONS HMR 49CFR §172.102 (C)(1)SPECIAL PROVISION 60 - APPROVAL OF CHEMICAL OXYGEN GENERA-TORS FOR TRANSPORT -.

(1) The CHEMICAL OXYGEN CONTAINER ASSEMBLIES TYPE VI are classified as OXY-GEN GENERATOR, CHEMICAL. Thus the international regulations (IATA, HMR 49CFR...)apply.


(1) Storage Equipment and Materials

NOTE: The listed packaging kits are approved and agree to the a.m. Specifications forstorage and shipment. Only approved packaging must be taken for storage and shipment of theCHEMICAL OXYGEN CONTAINER ASSEMBLIES TYPE VI.If necessary, do not hesitate to contact B/E Aerospace Systems for orderingnew packaging materials. F.



Subtask 35-21-14-620-001-A01C. Preservation

WARNING: DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS, MADE FROMPETROL, IN THE WORK AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Put the container assy together with the information sheet PNR E61522-00 and the labelPNR E60088-00 into a plastic bag PNR 8710071.

(2) Close the plastic bag with a plastic welding machine.

REFERENCE (PNR) QTY NAME

E62489-00 1 Kit, Single Container Packaging (approved)

Nov 15/201235-21-14

COMPONENT MAINTENANCE MANUAL6XC15 / 6XC22 / 6XC36 Serie

Subtask 35-21-14-530-001-A01D. Packaging (See Fig. 15001)

WARNING: DO NOT USE ANY OIL, GREASE OR OTHER LUBRICANTS, MADE FROMPETROL, IN THE WORK AREA OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS FIRE HAZARD.

CAUTION: USE ONLY THE ORIGINAL MANUFACTURER PACKAGING MATERIALSWHICH HAVE BEEN APPROVED AND WHICH AGREE WITH THE INTERNA-TIONAL REGULATIONS (IATA, HMR 49CFR...).

(1) Put the cardboard fixation PNR E62656-00 around the inner sidewall of the cardboard boxPNR E62655-00.

(2) Put container assy between the cardboard fixation PNR E62656-00. Then put the card-board filler plate PNR E62657-00 on the top (door assy) of the container assy.

Approved Single Container Packaging Kit PNR E62489-00Figure 15001 /GRAPHIC 35-21-14-991-022-A01

Nov 15/201235-21-14


(3) Close the cardboard box PNR E62655 and safety with a self-adhesive tape PNR 1187155.

(4) Put the units approval tag PNR E60019-00 (equipment label) into a self-adhesive plasticbag PNR 1564595.

(5) Bond these self-adhesive parts on the outer surface of the cardboard box PNR E62655-00:

• the self-adhesive plastic bag PNR 1564595 with the approval tag PNR E60019-00(equipment label),

• the identification label PNR 8712750,• the labels PNR 8700283, 8713205, 8711590.

Subtask 35-21-14-550-001-A01E. Storage

WARNING: STRICTLY OBEY THE PROCEDURES FOR STORAGE AND SHIPPING OFOXIDIZERS AS SPECIFIED IN THE:

- INTERNATIONAL AIR TRANSPORT ASSOCIATION SPECIFICATION (IATA)UN3356/5.1.,


CAUTION: DO NOT KEEP THE TRANSPORT CARDBOARD BOX NEAR FLUIDS THAT CANCAUSE CORROSION OR DAMAGE AND DO NOT KEEP NEAR SOURCES THATMAKE HEAT OR OZONE.

CAUTION: DO NOT KEEP COMPONENTS WITH RUBBER PARTS AT A TEMPERATUREMORE THAN 20 DEG. C (68 DEG. F).

(1) Keep the unit packed into the transport cardboard box on a shelf that:

• has a free circulation of air,• is free of moist,• is far from injury smoke or gas,• is far from direct heat or sunlight.

(2) These data must be clearly able to be read on the outer surface:

• the part number,• the date of manufacture,• the date of the next overhaul.

Subtask 35-21-14-510-001-A01F. Shipping Instructions:

WARNING: STRICTLY OBEY THE PROCEDURES FOR STORAGE AND SHIPPING OFOXIDIZERS AS SPECIFIED IN THE:

- INTERNATIONAL AIR TRANSPORT ASSOCIATION SPECIFICATION (IATA)UN3356/5.1.,

Nov 15/201235-21-14

COMPONENT MAINTENANCE MANUAL6XC15 / 6XC22 / 6XC36 Serie


(1) Due to the classification of the OXYGEN CONTAINER to as an - OXYGEN GENERATOR,CHEMICAL - the international regulations/instructions for shipping apply (See a.m. WAR-NING).These data must be clearly able to be read on the outer surface of the transport cardboardbox PNR 8712565:

• the shipping name: -OXYGEN GENERATOR, CHEMICAL -• the division: -5.I -• the class: -UN3356 -• the package instruction/group: -523 / II -• the approval number: -CA.... -

Additional Labels for Flight Shipping:

• the hazard label: -OXIDIZER -• the label: -CARGO AIRCRAFT ONLY -

oxigen gen container cmm 35-21-14

Documents

beror page

operation1 r2 rnov

record of revisionror1

date byrotr page

table of contentstoc1

6xc15 6xc22

revised page header

complete revision