over 100 certified astm methods reference e standards t ... · • instrumention for analyzing...
TRANSCRIPT
AccuStandard®
CertifiedReferenceStandards
4th Edition
PETROLEUM
Over 100
ASTM Methods
Member
New Products in this Catalog• Low Sulfur and Nitrogen Standards (see pages 6-11) • LUFT/LUST Standards (see pages 81-98)• TPH Standards (see pages 81, 92-93, 96-97)• No Haz Fee ICP & AA Standards (see pages 67-75)• Additional New ASTM Standards
Involvement in the Petrochemical Industry• Participation in regular ASTM meetings• Active in D-02 and D-16 subcommittees• Provides support to several Petrochemical Instrument Manufacturers
Resources• Low Sulfur Analyzers (such as XOS) for Measurements to ppb Levels• Instrumention for Analyzing Standards for ICP, ICP-MS, AA, GC/MS,
GC/FID, GC/EC, GC/NPD, Karl Fischer Titrator, and others• NIST/NVLAP Accredited (Lab Code 200389-0) as a PT Provider• ISO 9001:2000 Certified (ISO 9001 for the last 10 years)• Extensive Inventory of ASTM and Related Standards
Experience in Petrochemical Requirements• Years of Round Robin Studies with ASTM• Ampulled over 300 gallons of ASTM fuel sets including
over 35 gasoline and hydrocarbon blends• Standards for over 100 ASTM Methods• 17 years of Manufacturing, Organic & Inorganic Standards• Synthesizes rare Hydrocarbons not otherwise available
Notice the Difference with AccuStandard
PRINTED ONRECYCLED PAPER
© AccuStandard, Inc. 2003
Table of Contents
Wear Metals GroupSulfur Standards Group
Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard
ASTMSULFUR
WEAR M
ETALSPIANO
ORGANOMETALLICICP &
AALUFT/LUST
INDEX
QUOTE FORM
QC
ASTM # Method Description pageD-5441 MtBE Analysis by GC 30D-5442 Petroleum Waxes by GC 31D-5443 PNA Analysis by Multidimensional GC 31D-5453 Sulfur by Ultra Violet Fluorescence 31D-5480 Engine Oil Volatility by GC 32D-5482 Vapor Pressure Standards 29, 32D-5501 Ethanol Analysis by GC 32D-5580 Aromatics by GC 32-33D-5599 Oxygenates by OFID 34-36D-5600 Trace Metals by ICP 37D-5622 Oxygenates by Reductive Pyrolysis 37D-5623 Sulfur Compounds by Sulfur Selective Detection 38D-5708 Trace Metals by ICP 39, 62D-5762 Nitrogen by Chemiluminescence 40D-5769 Aromatics by GC/MS 42-51D-5771 Cloud Point of Petro Products 52D-5772 Cloud Point of Petro Products (Linear Cooling Rate) 52D-5773 Cloud Point of Petro Products (Constant Cooling Rate) 52D-5863 Trace Metals by AA 52D-5901 Freezing Point Aviation Fuels (Auto Optical Method) 53D-5972 Freezing Point Aviation Fuels 53D-5986 Oxygenates and Aromatics by GC/FTIR 53D-6160 PCBs by GC 54D-6258 Solvent Red 164 Dye Concentration in Diesel Fuels 54D-6277 Benzene in Spark Ignition Fuels 54D-6293 Oxygenates (O-PONA) in Engine Fuels by GC 55D-6296 Total Olefins in Spark Ignition Engine Fuels by GC 55D-6304 Water in Liquid Petro Products 5D-6334 Sulfur in Gasoline by Wavelength WD-XRF 10, 56D-6352 Boiling Range Distribution of Petroleum 56D-6378 Vapor Pressure 56D-6379 Aromatic Hydrocarbon by HPLC 57D-6417 Engine Oil by GC 57D-6428 Sulfur by ECD 57D-6443 Metals in Oil 58-65D-6445 Sulfur in Gasoline by ED-XRF 10, 58D-6481 Lube Oils by ED-XRF 58, 63, 64D-6550 Olefin Content of Gasoline by SFC 58D-6591 Aromatic Hydrocarbon by HPLC 57(IP 391)E-1064 Water in Petroleum 6ISO/CD V & Ni with Mn 62
Organometallic (Wear Metals) Analysis by AA, ICP, DCP, XRF 26, 28, 59-66Plasma Emission Spectroscopy (ICP) 67-71ICP (No Haz Fee) New 67-71Atomic Absorption Spectroscopy (AA) 67, 73-75AA (No Haz Fee) New 67, 73-75Plasma Emission / Mass Spectroscopy (ICP/MS) 72Trace Metals, Chlorine in Lube Oil, and Organo Tin New 66Ion Chrom 76-79
LUFT/LUST and TPH (New Section) 81-98
Index i-viiQuote Form backOrder Information back
D-3605 Trace Metals in Gas Turbine Fuel by AA 17D-4628 Wear Metals in Lube Oil 22D-4927 Wear Metals and Additives by WDXRF 25, 63-64D-4951 Wear Metals and Additives by ICP 26D-5185 Wear Metals and Additives by ICP 28D-5708 Trace Metals by ICP 39, 62D-5863 Trace Metals by AA 52D-6443 Metals in Oil 58, 64D-6481 Lube Oils by ED-XRF 58, 63-64
ASTM # Method Description pageCross Reference Tables (ASTM,IP,ISO,DIN,JIS,AFNOR) IIAnalytical Capabilities IIIOn-Line Ordering IVQuality Control 1-2
D-56 Flash Point Standards 3D-86 Synthetic Distillation Standard 3D-92 Flash Point Standards (COC) 3D-93 Flash Point Standards (PMCC) 3D-445 Viscosity Calibration Standard 3D-611 Aniline Point Standard 4D-1015 Freezing Point Standards 4D-1319 Olefin Analysis by FIA 4D-1744 Water in Liquid Petroleum Products 5D-2386 Freezing Point Calibration Standards 5D-2500 Cloud Point Calibration Standards 5D-2622 Sulfur by XRF 10D-2789 Hydrocarbon Analysis in Gasoline by GC/MS 11
PIANO, PONA, PNA by GC 12-13Proposed Method for Detailed Hydrocarbon Analysis 14Detailed Hydrocarbon Analysis PONA VI 14
D-2887 Boiling Range by GC 14Simulated Distillation (SIM DIS) by GC 15
D-3120 Sulfur by Oxidative Microcoulometry 16D-3230 Salts in Crude Oil 16D-3231 Phosphorus in Gasoline 16D-3237 Lead in Gasoline by AA 16D-3246 Sulfur in Petroleum Gas by Oxidative Microcoulometry 16D-3340 Li & Na in Lubricating Greases by Flame Photometer 17D-3524 Diesel Fuel Analysis by GC 17D-3605 Trace Metal in Gas Turbine Fuels by AA 17D-3606 Aromatics in Gasoline by GC 18D-3610 Total Co Analysis by Potentiometric Titration 18D-3710 Boiling Range by GC 20D-3798 p-Xylene Analysis by GC 20D-3831 Manganese in Gasoline by AA 20D-4059 PCB Analysis by GC 21D-4110 Ion Chrom 76D-4291 Ethylene Glycol by GC 21D-4294 Sulfur by ED-XRF 7-11, 21D-4377 Water in Liquid Petroleum Products 5, 21D-4420 Aromatics in Gasoline by GC 22D-4628 Wear Metals in Lube Oil 22D-4629 Nitrogen by Chemiluminescence 23D-4815 Oxygenates in Gasoline by GC 24D-4927 Wear Metals and Additives by WD-XRF 25,63D-4928 Water in Liquid Petroleum Products 6, 25D-4929 Chlorine in Crude Oil by Microcoulometry 25D-4951 Wear Metals and Additives by ICP 26D-5056 Trace Metals in Petroleum Coke by AA 26D-5059 Lead in Gasoline by X-Ray Spectroscopy 27D-5134 Petroleum Naphthas through n-Nonane by GC 27D-5184 Al and Si by ICP-AES & AA 28D-5185 Wear Metals and Additives by ICP 28D-5186 Aromatics by SFC 28D-5188 Vapor - Liquid Ratio Temperature 29D-5191 Vapor Pressure Standards 29D-5307 Boiling Range Distribution of Crude Petroleum by GC 29
D-2622 Sulfur by XRF 10D-3120 Sulfur by Oxidative Microcoulometry 10, 17D-3246 Sulfur in Petro Gas by Oxidative Microcoulometry 6-11D-4294 Sulfur by ED-XRF 10D-5453 Sulfur by Ultra Violet Fluorescence 6-11, 31D-5623 Sulfur Compounds by Sulfur Selective Detection 38D-6334 Sulfur in Gasoline by Wavelength WD-XRF 6-11D-6445 Sulfur in Gasoline by ED-XRF 6-11
Use the AccuStandard CrossReference Tables to Matchvarious InternationalMethods for knownPetrochemical analysis.
Tables Generated from(a) R.A. Nadkarni, “Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants,” Manual 44(200), ASTM West Conshohocken, PA(b) Annual Book of ASTM Standards 2000, Volumes 05.01 to 05.05
ANALYSIS ASTM IP ISO DIN JIS AFNOR PAGE
Tag Flash Point D-56 51411 K 2580 M07-003 3
Distillation D-86 123 3405 51751 K 2254 M07-002 3
COC Flash Point D-92 36 2592 51376 K 2265 T60-118 3
PMCC Flash Point D-93 34 2719 51758 K 2265 M07-019 3
Kinematic Viscosity D-445 71-1 3104 51562 K 2283 T60-100 3
Aniline Point D-611 2 2977 51775 M07-021 4
Hydrocarbon Types by FID D-1319 156 3837 51791 K 2536 M07-024 4
Water (Karl Fischer) D-1744 6296 T60-154 5
Freezing Point D-2386 16 3013 51421 K 2276 M07-048 5
Cloud Point D-2500 219 3015 51597 K 2269 T60-105 5
Sulfur by XRF D-2622 51400T6 K 2541 10
Boiling Range By GC D-2887 3924 14
Sulfur by Oxidative Microcoulometry D-3120 16591 16
Lead by AAS D-3237 428 16
Sulfur by Oxidative Microcoulometry D-3246 373 M07-052 10
Metals by AA D-3605 413 8691 51790T3 17
Benzene by GC D-3606 425 18
Sulfur by ED-XRF D-4294 336 8754 M07-053 21
Water (Karl Fischer) D-4377 356 10336 5
Metals by AA D-4628 308 51391T1 22
Nitrogen by Chemiluminescence Detection D-4629 379 M07-058 23
Metals by WD-XRF D-4927 407 51391T2 25, 63
Water (Karl Fischer) D-4928 386 10337 5, 25
Lead in Gas By X-Ray D-5059 228 27
Vapor Pressure D-5191 394 M07-079 29, 32
Oxygenates D-5599 408 34-36
Cloud Point D-5771 444 52
Cloud Point D-5772 445 52
Cloud Point D-5773 446 52
Freezing Point D-5901 434 53
Auto-Freeze Point D-5972 435 53
Hydrocarbons Automatic D-6379 436 57
Hydrocarbons Automatic NEW D-6591 391 57
Metals 14597 62
Fully AccreditedFor over 17 yearsAccuStandard has been theLeader in the ChemicalStandards Industry in bothOrganic and Inorganicproducts. AccuStandard isISO 9001:2000 registeredand a NIST/NVLAPaccredited ProficiencyTesting Provider (NVLAPCode 200389-0).
ISO 9001:2000Certificate Number: 31692
MEMBER
Cross Reference Table Sorted by ASTM Method
II
This is a partial list of Standards available for ASTM Methods
Member
AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.
Milligram to Kilogram Scale GlasswareEquipment to work under N2/ArFlash and Liquid Solid Phase Chrom. (mg to 2 kg)Preparative TLCBuchi Rotary EvaporatorVacuum Drying OvenParr Pressure Reactor (high pressure reaction, hydrogenation)Distillation Equipment - High Vacuum Distillation, Molecular
Distillation (Kugelrohr), Spinning Band Columns,Packed and Vigreaux columns
Melting Point ApparatuspH meterViscometerCentrifuge
Lab Resources
Analytical Capabilities
Inorganic (ICP)PE Optima 3000Spectro FMD-07OrganicsGCs: (6) HP 5890 Series II, FID, NPD, ECD all with
auto injectorsGC/MS: (3) HP 5971A
HP 5971A with OI Analytical Purge & TrapPE Q-Mass 910
HPLC: Varian 5000 with Applied Bioscience Fluorescencedetector and HP auto injector
Sulfur (low level)XOS (XRF) with monochromatic wavelength disperserAntek 9000 Series (UVF)
MiscellaneousIon Chromatograph, Waters 600E with
Conductivity detector 431, Alltech 335 IonSuppressor
Automatic Polarimeter, Zuzi W22Karl Fischer Titrator
Analytical Instruments
III
5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:
Catalog Number
Single or Multiple Components,
Method (EPA, ASTM, etc.)
Chemical Category (Organic, Inorganic, Petroleum, etc.)
Other Companies’ Part Number
Log on to www.accustandard.com and see how easy it is.
Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, see
details on website.
On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.
There is an easier way to get Chemical Reference Standards
e-Standards® from AccuStandard.com
Over 30,000 Standardsjust a click away
IV
On-Line Ordering
AccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a customformulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. Tomake an inquiry for Custom Quotes visit our website.
You can also Email your requirements to [email protected] or Fax us at 203-786-5287. Please include the followinginformation: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (millilitersper ampule, bottle, or vial).
Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (whereavailable). Every component in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. Thesolutions are made up to volume using class A glassware. A certificate comes with each standard and documents the gravimetricvalues used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plusstatistical analysis. A data package is provided containing analytical and gravimetric data (Organic customs only).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
Custom Formulations
AccuPetroCheck Consensus Value QC Standards
AccuPetroTest Gasoline
AccuPetroTest Gasoline
AccuPetroTest
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 1
QC
QC
Technical Note
Low Sulfur QC SampleSBPT-LSGAS $ 25 / 2 x 15 mL
Parameter Method Approx. RangeSulfur D-5453 0 - 50 µg/g
Olefin QC SampleSBPT-OLEFINSFC $ 25 / 2 x 15 mL
Parameter Method Approx. RangeTotal Olefins D-6550 1 - 40 Vol.%
AccuPetroCheck QC StandardsTwo of the fuels are available asAccuPetroCheck Consensus Value QCStandards. The AccuPetroCheck CARB andConventional gasoline reference materials haveall parameters listed on the certificate with theConsensus Values and the regression equationsfor reproducability. Use of these ReferenceMaterials improve the quality of laboratoryresults. The Consensus Values listed reflectinitial statistical treatment of the data at the timethe catalog was published. The actual certificateprovided with the AccuPetroCheck QC standardwill have the accepted Consensus Value based onstatistical treatment of the data.
Sulfur Single Blind AccuPetroTestAlternative Matrices StandardsAccuStandard has manufactured a number ofDiesel and White Mineral Oil QC productscontaining a gravimetrically prepared amount ofSulfur. Use of these alternative matrix materialscan provide further evaluation of the QA/QCprocess in the laboratory. Two samples will besent for the test parameter and a separate sealedenvelope containing the gravimetrically preparedsulfur values is also provided. The secondsample is for repeatability testing or for use as afuture QA/QC reference.
Sulfur in White Mineral Oil QCStandardSBPT-SWMO $ 25 / 2 x 15 mL
Parameter Approx. RangeSulfur 20 - 11000 µg/g
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for SulfurCalibration Standards
Sulfur in Diesel Fuel QC StandardSBPT-SDF $ 25 / 2 x 15 mL
Parameter Approx. RangeSulfur 20 - 11000 µg/g
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for Sulfur Calibration Standards
Conventional Gasoline QCStandardASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mL
Parameter Method Value Conc.Total Aromatics D-1319 34.6 Vol.%Total Olefins D-1319 12.4 Vol.%Total Saturates D-1319 62.8 Vol.%Sulfur D-2622 0.0338 Wt.%Sulfur D-4294 0.0368 Wt.%Sulfur D-5453 317.36 µg/gSulfur D-6344 338.78 µg/gBenzene D-5769 0.55 Vol.%Toluene D-5769 5.53 Vol.%Total Aromatics D-5769 32.51 Vol.%Benzene D-6277 0.52 Vol.%Total Olefins D-6550 12.4 Vol.%
CARB Low Sulfur RFG QCStandardASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mL
Parameter Method Value Conc.Total Aromatics D-1319 24.5 Vol.%Total Olefins D-1319 5.3 Vol.%Total Saturates D-1319 58.3 Vol.%Sulfur D-2622 0.0057 Wt.%Sulfur D-4294 0.0078 Wt.%Sulfur D-5453 55.76 µg/gSulfur D-6344 59.31 µg/gBenzene D-5769 0.80 Vol.%Toluene D-5769 4.92 Vol.%Total Aromatics D-5769 23.42 Vol.%Benzene D-6277 0.78 Vol.%Total Olefins D-6550 5.3 Vol.%
AccuPetroCheck and AccuPetroTest Real World Gasoline QC StandardsIn cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampulled 21 Real World gasoline reference fuels. Consensus Values havebeen determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of wellcharacterized gasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTMD-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’sPetroTest & PetroCheck standards are being successfully used to achieve these new Quality Control requirements.
Quality Control Standards
Quality Control Standardscontinue on next page
Real World GasolineD-02.03D-02.04
This comprehensivesingle blind gasoline QCsample tests for moreparameters from a singlesample. The actualgasoline sample will haveconsensus values listedon the datasheet that fallwithin the range listed foreach parameter.
Comprehensive Single Blind Gasoline QC SampleSBPT-COMP $ 50 / 2 x 15 mL
Parameter Method Approx. Range Conc.Total Aromatics D-1319 8 - 60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30 - 80 Vol.%Sulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 0.5 -500 µg/gSulfur D-6344 1.0 - 1000 µg/gBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%Total Aromatics D-5769 8 - 60 Vol.%Benzene D-6277 0.1 - 2.0 Vol.%Total Olefins D-6550 1 - 40 Vol.%
2 Quality System is Certified to comply with the International ISO 9001 Quality Standard
QCQC
Quality Control Standards
Conducting a Petrochemical Round Robin for a new ASTM method?Select AccuStandard to prepare the necessary samples for the Round Robin studyAccuStandard has packaged for ASTM committee D-02 various select groups of gasoline fuels and hydrocarbon products for use in variousRound Robin studies. Large Sample OfferingAccuStandard was selected by ASTM committee D-02 to fill, seal and package an initial set of 21 different types of Round Robin Gasolines.Each gasoline was selected due to its unique properties. These unique properties will be determined by various ASTM methods under evaluationthrough ASTM subcommittees. AccuStandard has expanded this offering with additional materials blended for other ASTM Round Robins.FlexibilityUse the original 21 gasoline samples to conduct a Round Robin and we can label the samples appropriately to protect the integrity of the RoundRobin. In addition, we can easily add additional samples to your specific Round Robin study to expand the scope of the method for differentmatrices, concentrations or instrument types.
AccuPetroTest Gasoline QC AccuPetroTest Single BlindStandardsPetrochemical laboratories looking to testthe performance of the laboratory for aspecific parameter can order the SingleBlind AccuPetroTest sample for theparameter of interest. Two real worldgasoline samples will be sent for the testparameter requested and a separate sealedenvelope containing the determinedConsensus Value is also provided. Thesecond sample is for repeatability testingor as a future QA/QC reference.
Petro PT Samples
Oxygenate PT SampleWith MtBE contamination problems in drinking water, numerous states arenow requiring certification for Oxygenate monitoring. Join AccuStandard’snext study for Oxygenate analysis. Our timely PT schedule easily allowsyour lab to be proactive in new regulatory requirements. The analytes inthe standard and the PT sample have been drawn from the California listof known prevalent oxygenates in gasoline. These new Oxygenate PTsamples and standards allow your Lab to:
• Expand testing capabilities• Generate new testing revenue
• Eliminate standard preparation • Easily combine with other
AccuStandard Volatile standards
***
WP-PT Oil, Grease & TPHIPE-OILG-001-AS $ 32 / 5 mLIPE-OILG-001-AT $ 32 / 5 mLIPE-OILG-001-AV $ 32 / 5 mLSample conc. after prepContains 2 analytes listed below
Analyte List Sample rangeTotal Oil & Grease † 5-100 mg/LTPH 5-100 mg/L
Oil and GreaseWC-OILG-10X-1 $ 45 / 100 mL1000 µg/mL Total Oil and Grease in n-Propanol
Contains 500 µg/mL vegetable oil and 500 µg/mL of petroleum oil.Shake well before use.
Suggested Calibration Standard
Olefins QC SampleSBPT-OLEFIN $ 25 / 2 x 15 mL
Parameter Method Approx. RangeTotal Aromatics D-1319 8-60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30-80 Vol. %
See ASTM Method D-1319 for Sulfur CalibrationStandards
Sulfur QC SampleSBPT-SGAS $ 25 / 2 x 15 mL
Parameter Method Approx. RangeSulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 4.0 - 500 µg/gSulfur D-6344 1.0 - 1000 µg/g
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for Sulfur Calibration Standards
Benzene/Toluene QC SampleSBPT-BENZ $ 25 / 2 x 15 mL
Parameter Method Approx. RangeBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%
See ASTM Methods, D-3606, D-5580-95, D-5769-95for Benzene Calibration Standards
Aromatics QC SampleSBPT-AROM $ 25 / 2 x 15 mL
Parameter Method Approx. RangeTotal Aromatics D-5769 8 - 60 Vol.%
See ASTM Methods, D-3606, D-5580-95, D-5769-95for Benzene Calibration Standards
SUFFIX KEY"AS" = Formal PT Study"AT" = Pre-Test"AV" = Values Included
This PT sample can be used by gravimetric oil and greasemethods. In addition, it can also be used for TPH analysis bygravimetric methods including the EPA method 1664. Thesample contains real world material commonly found atpetroleum containment sites.
Technical Note
MTBETAME
ETBEDiisopropylether
WS-PT OxygenatesOPE-OXY-001-AS $ 47 / 2 mLOPE-OXY-001-AT $ 47 / 2 mLOPE-OXY-001-AV $ 47 / 2 mLSample conc. after prep 5.0-50 µg/LContains 4 analytes listed below
NEW
TAME (2000 µg/mL)t-Butanol (10000 µg/mL)
Oxygenate Gasoline Additive StandardOGAD-001 $ 30 / 1 x 1 mLOGAD-001-PAK SAVE 20% $ 120 / 5 x 1 mLAt stated conc. in MeOH 5 comps.
MtBE (2000 µg/mL)ETBE (2000 µg/mL)Isopropyl ether (2000 µg/mL)
Suggested Calibration Standard
ASTM Round Robin&
PTSamples
Lab Code 200389-0
* Designed for NELAC/CA
† Indicates that theses analytes areincluded in the NVLAP Scope ofAccreditation, Lab Code 200389-0
NEW
***
ASTM D-56, D-92, D-93 Flash Point Standards
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 3
Member
ASTM
Certified Flash Point StandardsThe reference material is a stable, pure hydrocarbon with a method specific flash pointdetermined by an inter-laboratory study using the ASTM Method # referenced.
Cat. No. ASTM # Nominal Flash Point Price / Unit
ASTM-P-133-01 PMCC D93 65°C $ 175 / 250 mLASTM-P-133-02 PMCC D93 134°C 130 / 250 mLASTM-P-133-03 COC D92 138°C 130 / 250 mLASTM-P-133-04 TCC D56 67°C 175 / 250 mL
Physical Properties
Cat. No. ASTM # Nominal Flash Point Price / Unit
ASTM-P-132-01 PMCC D93 65°C $ 110 / 250 mLASTM-P-132-02 PMCC D93 93°C 110 / 250 mLASTM-P-132-03 COC D92 200°C 110 / 250 mLASTM-P-132-04 COC D92 230°C 110 / 250 mL
ASTM D-86 Synthetic Distillation Standard
The automatic distillation apparatus duplicates the distillation conditions of the manual method. Theincreased reliance on electronic control requires an independent standard to verify that the apparatus isperforming correctly. This synthetic blend of hydrocarbons boil in the temperature range specified inASTM D-86 distillation groups 1 and 2, and a fuel oil that meets the group 4 criteria.
The group 1 and 2 standards cover the boiling range 129 - 368 °F (54 - 187 °C) and are verified byconsensus analysis with twelve refinery laboratories. The group 4 standard covers the range from 410 -670 °F (210 - 355 °C). Products are packaged in convenient sizes to meet your laboratory sampleanalysis demands.
Verified by consensus analysis using ASTM Method # referenced
Method 56, 92, 9386
445
Cat. No. Group Description Price / Unit
ASTM-P-126-01 1, 2 Synthetic Distillation Standard $ 160 / 500 mLASTM-P-126-SET 1, 2 Synthetic Distillation Standard 290 / 2 x 500 mL
ASTM-P-127-01 4 Distillation Standard 160 / 250 mLASTM-P-127-02 4 Distillation Standard 290 / 500 mL
QC
Oils are tested inaccordance withASTM D-445
Technical Note Also see Cloud PointStandards used for ASTMMethod D-2500 on page 5
Standards of InterestASTM D-445 Viscosity Calibration Standards
ASTM D-92 & Flash & Fire Points by Cleveland Open Cup (COC) &ASTM D-93 Flash Point by Pensky Martin Closed Cup (PMCC)
See Method D-56 on this page for the comprehensive line of flash point standards
Cat. No. Viscosity @ 40 °C Price / Unit
ASTM-P-128-01 4 Cst $ 60 / 500 mLASTM-P-128-02 7 Cst 60 / 500 mLASTM-P-128-03 19 Cst 60 / 500 mLASTM-P-128-04 61 Cst 60 / 500 mLASTM-P-128-05 180 Cst 60 / 500 mLASTM-P-128-06 520 Cst 60 / 500 mL
Originally designed forASTM D-56-98a,D-92-98a, D-93-99b
Originally designed forASTM D-86-99a
Originally designed forASTM D-445-97
4 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
The following set of standardshave been prepared for thedetermination of Aromatics,Olefins, Oxygenates andSaturates in petroleum fractionsby Fluorescent IndicatorAdsorption (FIA) IP designation156/95.
The final certificate for the FIAcalibration curve lists not onlythe volume percents for thehydrocarbon types, but also theindividual volume percents foreach analyte in the functionalgroup.
To further assist thePetrochemist, the weight fractionfor each hydrocarbon type andindividual analyte is listed on thefinal certificate. By providing theindividual weights thePetrochemical chemist can usethe FIA standards for othertypes of instrumentationmeasuring these Petroleumfractions.
Technical Note
ASTM D-611 (Reapproved 1998) Aniline Point Standards
ASTM D-1015 Freezing Points of High Purity Hydrocarbons
See Method D-2386 page 5 for AccuStandard’s new line of Freezing Point Standards
Method 61110151319
The accuracy of automated aniline point apparatus can be verified using a range of standards whoseaniline points are determined using ASTM D-611 (Method A) and ASTM D-611 (Method E). Standards arepackaged in 20 mL ampules in an inert atmosphere.
Physical Properties
Cat. No. Nominal Aniline Point Price / Unit
D-611-SET Set include 5 Standards listed below $ 90 / 5 x 20 mLAniline Point Verification Set Method 611(A)
D-611-01 0°C 20 mLD-611-02 30°C 20 mLD-611-03 55°C 20 mLD-611-04 68°C 20 mLD-611-05 94°C 20 mL
Cat. No. Nominal Aniline Point Price / Unit
D-611E-SET Set include 3 Standards listed below $ 90 / 3 x 20 mLAniline Point Verification Set Method 611(E)
D-611E-01 43°C 20 mLD-611E-02 62°C 20 mLD-611E-03 77°C 20 mL
Cat. No. Price / Unit
ASTM-P-134-PAK Pure Aniline $ 30 / 5 x 15 mL
Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Total Olefins 2.0 4.0 5.0 6.0 8.0 10.0 12.0Total Paraffins 57.0 55.0 52.0 51.0 45.0 45.0 40.0Total Aromatics 23.0 24.0 25.0 26.0 29.0 28.0 30.0Total Oxygenate 18.0 17.0 18.0 17.0 18.0 17.0 18.0
ASTM D-1319 Calibration Standards by Fluorescent Indicator Adsorption FIA
For routine purposes pureAniline is packaged in ampulesunder dry nitrogen. Thisminimizes the risk of oxidation.
Technical Note
For the mandatory real world QC samplesstipulated in the Method, see page 1-2
Standards of Interest
Vol. %1-Heptene 33.3
Vol. %1-Pentene 33.32,3-Dimethyl-2-butene 33.3
FIA Olefin StandardFIA-OLE $ 40 / 1 x 1 mLFIA-OLE-5ML SAVE 40% $ 120 / 1 x 5 mL
3 comps.
mix ratiom-Xylene 161,2,4-Trimethylbenzene 81,3,5-Trimethylbenzene 81,2,4,5-Tetramethylbenzene 4Naphthalene 4
mix ratioBenzene 4Toluene 32Ethylbenzene 8p-Xylene 8o-Xylene 8
Vol. %2,3-Dimethylpentane 14Isooctane 16n-Octane 14n-Decane 7
Vol. %n-Pentane 8n-Hexane 9Cyclohexane 15n-Heptane 14
FIA Aromatic StandardFIA-ARO $ 30 / 1 x 1 mLFIA-ARO-5ML SAVE 33% $ 100 / 1 x 5 mL
10 comps.
FIA Paraffin StandardFIA-PAR $ 30 / 1 x 1 mLFIA-PAR-5ML SAVE 33% $ 100 / 1 x 5 mL
8 comps.
D-1319Meets
EPA Guidelines
for RFG Analysis
Olefin FIA Calibration CurveFIA-CAL-SET $ 300 / Set of 7 x 1 mL
Originally designed forD-611-82
Originallydesigned for D-1319-99
ASTM D-1744, E-1064, D-4377 Water in Liquid Petroleum Products byD-4928, D-6304 Karl Fischer
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 5
Member
ASTM
Many ASTM Petrochemicalmethods and specificationsreference using QA/QCstandards for water contentmeasurements. AccuStandardhas formulated a comprehensiverange of water standardspackaged in convenient sizes tomeet the various referencedmethods.
Technical Note
ASTM D-2386 Freezing Point Calibration Standards
ASTM D-2500 Cloud Point Calibration Standards
Method 1744-630423862500
Verified by consensus analysis byASTM Method D-2386
Technical Note
Cat. No. Description Price / Unit
KF-0.6X-5ML-VAP Water content 60 µg/g $ 65 / 10 x 5 mL
KF-1X-2ML-VAP Water content 100 µg/g 40 / 10 x 2 mLKF-1X-5ML-VAP Water content 100 µg/g 45 / 10 x 5 mLKF-1X-20ML-PAK Water content 100 µg/g 50 / 5 x 20 mL
KF-10X-2ML-VAP Water content 1000 µg/g 40 / 10 x 2 mLKF-10X-5ML-VAP Water content 1000 µg/g 45 / 10 x 5 mLKF-10X-20ML-PAK Water content 1000 µg/g 50 / 5 x 20 mL
KF-50X-2ML-VAP Water content 5000 µg/g 40 / 10 x 2 mLKF-50X-5ML-VAP Water content 5000 µg/g 45 / 10 x 5 mLKF-50X-20ML-PAK Water content 5000 µg/g 50 / 5 x 20 mL
Value Added Paks (Cat. No.’sending in -VAP) providemultiple single units packagedtogether for both greaterstability and cost savings.
Physical Properties
Cat. No. Nominal Freezing Point Price / Unit
ASTM-P-129-01 - 50 °C $ 110 / 250 mLASTM-P-129-02 - 45 °C 110 / 250 mL
Cat. No. Cloud Point, Approx. Value Price / Unit
ASTM-P-131-01 + 5 °C $ 110 / 250 mLASTM-P-131-02 - 2 °C 110 / 250 mLASTM-P-131-03 - 10 °C 110 / 250 mLASTM-P-131-04 - 15 °C 110 / 250 mLASTM-P-131-05 - 20 °C 110 / 250 mL
Standards are available for coulometric Karl Fischer titrations and are packaged in 2 mL, 5 mL, and 20 mL ampules insets of 5 and 10. The following concentrations are available:
Originally designed forD-2386-97
Verified by consensus analysis byASTM Method D-2500
Technical NoteOriginally designed forD-2500-00
6 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
SULF
UR
Low Sulfur Standards on following pages
Sulfur StandardsASTM Methods forSulfur
Analysis
D-2622-98, D-3120-96, D-3246-96, D-4294-98, D-5453-00, D-6334-98, D-6445-99 & Proposed ASTM Sulfur MethodsAccuStandard offers the Petroleum Industry the most complete line of calibration standards designed for today’s Proposed &Promulgated test methods for Sulfur analysis. These calibration standards are designed specifically for the analysis of Sulfur in awide variety of matrices such as #2 diesel fuel, white mineral oil, kerosene, gasoline, crude oil & residual oil.
Traceability, Quality and CertificationAll Sulfur standards are manufactured from the highest quality raw materials, including well characterized starting materials & thelowest sulfur matrices available from the Petrochemical market. All standards are manufactured on a weight/weight basis usingbalances that are calibrated and verified daily against reference mass standards directly traceable to NIST under test No.822/254480. The concentration of these working level Sulfur standards have established traceability links to NIST SRM’s whereavailable.
Convenient PackagingSince applicable concentration ranges will vary based on the instrumentation used & the nature of the sample the standards can beordered as complete sets, individual bottles, or Ready-to-Aspirate AccuShots.
AccuShots... Packaged to improve analytical standard integrityAccuStandard is the first standard manufacturer to provide sulfur standards in convenient and Ready-to-Aspirate AccuShot 20 mLsealed ampules. Each 20 mL AccuShot provides the necessary material for calibration curve development or daily QA/QC. Bypurchasing AccuShots the analytical chemist can open a fresh shot for each analysis which eliminates opening and pipettingrepeatedly from a stock bottle. This minimizes contamination and evaporation. These ship with no haz fee for additional savings.
ASTM D-5453
Test to Low ppbSulfur
Contact us for a copy of the Southwest Research Institute
D-5453 Fitness for Use Report
7
Limits of Detection < 1 ppm
Fast and easy sample preparation.
Typical measurement time: 300 sec.
Dynamic range: 0-1000 ppm in onecalibration.
No sample conversion or reagentsrequired.
Exceptional signal-to-backgroundprovides high sensitivity for low-level sulfur fuels
Analytical Capabilities
X-Ray Optical Systems, Inc.15 Tech Valley DriveEast Greenbush, NY 12061Tel. 518-880-1500website: www.xos.com
Monochromatic WDXRF Technology
MWD XRF Sulfur Analyzerin Diesel and Gasoline Fuels
XOS SINDIE AnalyzerX-Ray optics enable detection capability wellbeyond traditional XRF techniques. Thesame Monochromatic WD XRF technologyof the SINDIE bench-top sulfur analyzer isavailable in an on-line sulfur analyzer.
SULFUR ANALYSIS IN
ULTRA LOW SULFUR FUELS
Repeatability:1 ppm 0.5 ppm10 ppm 1.7 ppm100 ppm 5.3 ppm500 ppm 11.7 ppm
SULFUR
8 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
SULF
URSulfur in
Mineral OilDiesel Fuel
Sulfur in Light Weight Mineral Oil (20 cSt)Sulfur in Heavy Weight Mineral Oil (75 cSt)
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 ea
Sulfur StandardsASTM Methods
AccuShots... Packaged to improve analyticalstandard integrityAccuStandard is the first standard manufacturer toprovide sulfur standards in convenient and Ready-to-Aspirate AccuShot 20 mL sealed ampules. Each 20 mLAccuShot provides the necessary material for calibrationcurve development or daily QA/QC. By purchasingAccuShots the analytical chemist can open a fresh shotfor each analysis which eliminates opening and pipettingrepeatedly from a stock bottle. This minimizescontamination and evaporation. These ship with no hazfee for additional savings.
Ready-to-Use
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 ea
8
ASTM Methods Sulfur in Mineral Oil
Sulfur conc. calculated from % sulfur in di-n-butyl sulfide
Technical Note
Sulfur in Ready-to-UseConcentration White Mineral Oil Sulfur AccuShots
µg/g Wt. % Cat. No. Cat. No.Blank 0.000 SWMO-BL-4 SWMO-BL-SHOT
100 0.010 SWMO-1X-4 SWMO-1X-SHOT200 0.020 SWMO-2X-4 SWMO-2X-SHOT300 0.030 SWMO-3X-4 SWMO-3X-SHOT400 0.040 SWMO-4X-4 SWMO-4X-SHOT500 0.050 SWMO-5X-4 SWMO-5X-SHOT750 0.075 SWMO-7.5X-4 SWMO-7.5X-SHOT
1,000 0.10 SWMO-10X-4 SWMO-10X-SHOT1,500 0.15 SWMO-15X-4 SWMO-15X-SHOT2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-30X-4 SWMO-30X-SHOT4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-50X-4 SWMO-50X-SHOT7,000 0.70 SWMO-70X-4 SWMO-70X-SHOT
10,000 1.00 SWMO-100X-4 SWMO-100X-SHOT15,000 1.50 SWMO-150X-4 SWMO-150X-SHOT20,000 2.00 SWMO-200X-4 SWMO-200X-SHOT30,000 3.00 SWMO-300X-4 SWMO-300X-SHOT40,000 4.00 SWMO-400X-4 SWMO-400X-SHOT50,000 5.00 SWMO-500X-4 SWMO-500X-SHOT60,000 6.00 SWMO-600X-4 SWMO-600X-SHOT
Set of above SWMO-CAL-SET-4 Each AccuShot productCat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mL
ampules at the statedconc. for $ 60Individual Sulfur 1 -10 units 10 +units
Standards 4 oz Bottle $ 55 ea $ 50 ea
Sulfur in Ready-to-UseConcentration White Mineral Oil Sulfur AccuShots
µg/g Wt. % Cat. No. Cat. No.Blank 0.000 SWMO-LT-BL-4 SWMO-LT-BL-SHOT
100 0.010 SWMO-LT-1X-4 SWMO-LT-1X-SHOT200 0.020 SWMO-LT-2X-4 SWMO-LT-2X-SHOT300 0.030 SWMO-LT-3X-4 SWMO-LT-3X-SHOT400 0.040 SWMO-LT-4X-4 SWMO-LT-4X-SHOT500 0.050 SWMO-LT-5X-4 SWMO-LT-5X-SHOT750 0.075 SWMO-LT-7.5X-4 SWMO-LT-7.5X-SHOT
1,000 0.10 SWMO-LT-10X-4 SWMO-LT-10X-SHOT1,500 0.15 SWMO-LT-15X-4 SWMO-LT-15X-SHOT2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-LT-30X-4 SWMO-LT-30X-SHOT4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-LT-50X-4 SWMO-LT-50X-SHOT7,000 0.70 SWMO-LT-70X-4 SWMO-LT-70X-SHOT
10,000 1.00 SWMO-LT-100X-4 SWMO-LT-100X-SHOT15,000 1.50 SWMO-LT-150X-4 SWMO-LT-150X-SHOT20,000 2.00 SWMO-LT-200X-4 SWMO-LT-200X-SHOT30,000 3.00 SWMO-LT-300X-4 SWMO-LT-300X-SHOT40,000 4.00 SWMO-LT-400X-4 SWMO-LT-400X-SHOT50,000 5.00 SWMO-LT-500X-4 SWMO-LT-500X-SHOT60,000 6.00 SWMO-LT-600X-4 SWMO-LT-600X-SHOT
Set of above SWMO-LT-CAL-SET-4 Each AccuShot product Cat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mL
ampules at the stated conc. for $ 60
ASTM Methods Sulfur in #2 Diesel FuelSulfur in Ready-to-Use
Concentration #2 Diesel Fuel Sulfur AccuShots
µg/g Wt. % Cat. No. Cat. No.Blank 0.000 SDF-BL-4 SDF-BL-SHOT
100 0.010 SDF-1X-4 SDF-1X-SHOT200 0.020 SDF-2X-4 SDF-2X-SHOT300 0.030 SDF-3X-4 SDF-3X-SHOT400 0.040 SDF-4X-4 SDF-4X-SHOT500 0.050 SDF-5X-4 SDF-5X-SHOT750 0.075 SDF-7.5X-4 SDF-7.5X-SHOT
1,000 0.10 SDF-10X-4 SDF-10X-SHOT1,500 0.15 SDF-15X-4 SDF-15X-SHOT2,000 0.20 ------------- -------------3,000 0.30 SDF-30X-4 SDF-30X-SHOT4,000 0.40 ------------- -------------5,000 0.50 SDF-50X-4 SDF-50X-SHOT7,000 0.70 SDF-70X-4 SDF-70X-SHOT
10,000 1.00 SDF-100X-4 SDF-100X-SHOT15,000 1.50 SDF-150X-4 SDF-150X-SHOT20,000 2.00 SDF-200X-4 SDF-200X-SHOT30,000 3.00 SDF-300X-4 SDF-300X-SHOT40,000 4.00 SDF-400X-4 SDF-400X-SHOT50,000 5.00 SDF-500X-4 SDF-500X-SHOT60,000 6.00 SDF-600X-4 SDF-600X-SHOT
Set of above SDF-CAL-SET-4 Each AccuShot product Cat. No.’s 19 x 4 oz. $ 850 contains 5 x 20 mL
ampules at the statedconc. for $ 60
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur Methods
Method ASTM Methods forSulfur
9
For the mandatory realworld QC samplesstipulated in the Method,see pages 1- 2.
Standards of Interest
Sulfur in Heavy Distillate Kerosene
Sulfur StandardsASTM Methods
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 ea
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 55 ea $ 50 ea
ASTM Methods Sulfur in Kerosene
Sulfur concentrationcalculated from % sulfurin di-n-butyl sulfide.
Technical Note
Sulfur in Light Ready-to-UseConcentration Distillate Kerosene Sulfur AccuShots
µg/g Wt. % Cat. No. Cat. No.Blank 0.000 SK-BL-4 SK-BL-SHOT
100 0.010 SK-1X-4 SK-1X-SHOT200 0.020 ---------------300 0.030 SK-3X-4 SK-3X-SHOT400 0.040 ---------------500 0.050 SK-5X-4 SK-5X-SHOT750 0.075 SK-7.5X-4 SK-7.5X-SHOT
1,000 0.10 SK-10X-4 SK-10X-SHOT1,500 0.15 ---------------2,000 0.20 SK-20X-4 SK-20X-SHOT3,000 0.30 SK-30X-4 SK-30X-SHOT4,000 0.40 SK-40X-4 SK-40X-SHOT5,000 0.50 SK-50X-4 SK-50X-SHOT7,000 0.70 ---------------
10,000 1.00 SK-100X-4 SK-100X-SHOT15,000 1.50 ---------------20,000 2.00 SK-200X-4 SK-200X-SHOT30,000 3.00 ---------------40,000 4.00 ---------------50,000 5.00 ---------------60,000 6.00 ---------------
Set of above SK-CAL-SET-4 Each AccuShot productCat. No.’s 12 x 4 oz. $ 500 contains 5 x 20 mL
ampules at the statedconc. for $ 60
Sulfur in HeavyConcentration Distillate Kerosene
µg/g Wt. % Cat. No.Blank 0.000 SK-HD-BL-4
100 0.010 SK-HD-1X-4200 0.020 SK-HD-2X-4300 0.030 SK-HD-3X-4400 0.040 SK-HD-4X-4500 0.050 SK-HD-5X-4750 0.075 SK-HD-7.5X-4
1,000 0.10 SK-HD-10X-41,500 0.15 SK-HD-15X-42,000 0.20 SK-HD-20X-43,000 0.30 SK-HD-30X-44,000 0.40 SK-HD-40X-45,000 0.50 SK-HD-50X-47,000 0.70 SK-HD-70X-4
10,000 1.00 SK-HD-100X-415,000 1.50 SK-HD-150X-420,000 2.00 SK-HD-200X-430,000 3.00 SK-HD-300X-440,000 4.00 SK-HD-400X-450,000 5.00 SK-HD-500X-460,000 6.00 SK-HD-600X-4
Set of above SK-HD-CAL-SET-4Cat. No.’s 21 x 4 oz. $ 950
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 9
ASTMSULFURSulfur Standards
ASTM Methods
Sulfur in Light Distillate Kerosene
Sulfur inKerosene
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur Methods
ASTM D-3120, D-3246 Sulfur Calibration Set
ASTM D-2622, D-4294 Sulfur Calibration Standards ASTM D-2622, D-6334, Low Level SulfurD-6445 Calibration Standards
ASTM D-2622, D-6334, Mid Level SulfurD-6445 Calibration Standards
10 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
SULF
URASTM 2622-
6445
10 Quality System is Certified to comply with the International ISO 9001 Quality Standard
For the mandatory real world QC samples stipulated in manyASTM Sulfur Methods, see page 1-2
Standards of Interest
Cat. No. Sulfur Conc. Sulfur Wt. % UnitSTP-BL-4 Blank 0.0 4 oz.STP-1X-4 10 µg/g 0.001 4 oz.STP-2X-4 20 µg/g 0.002 4 oz.STP-3X-4 30 µg/g 0.003 4 oz.STP-5X-4 50 µg/g 0.005 4 oz.STP-10X-4 100 µg/g 0.010 4 oz.STP-20X-4 200 µg/g 0.020 4 oz.STP-30X-4 300 µg/g 0.030 4 oz.STP-40X-4 400 µg/g 0.040 4 oz.STP-60X-4 600 µg/g 0.060 4 oz.STP-100X-4 1000 µg/g 0.10 4 oz.STP-200X-4 2000 µg/g 0.20 4 oz.STP-300X-4 3000 µg/g 0.30 4 oz.
STP-CAL-SET $ 650 / set of 13 x 4 oz.In Isooctane Set contains the above 13 individual bottles
Standards can be mixed for quantity discounts
1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard
Standards can be mixed for quantity discounts
1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard
Cat. No. Sulfur Conc. Sulfur Wt. % UnitD-2622-LL-200X-4 200 µg/g 0.020 4 ozD-2622-LL-400X-4 400 µg/g 0.040 4 ozD-2622-LL-600X-4 600 µg/g 0.060 4 ozD-2622-LL-700X-4 700 µg/g 0.070 4 ozD-2622-LL-800X-4 800 µg/g 0.080 4 ozD-2622-LL-900X-4 900 µg/g 0.090 4 ozD-2622-LL-1100X-4 1100 µg/g 0.110 4 ozD-2622-LL-1200X-4 1200 µg/g 0.120 4 oz
Well characterized Thiophene & 2-Methyl thiophene are usedin a low sulfur Isooctane/Toluene matrix for this calibration set.
Technical Note
Well characterized Thiophene & 2-Methyl thiophene are usedin a low sulfur Isooctane/Toluene matrix for this calibration set.
New Requested Additions for use on XRF EnergyDispersive or Wavelength Instruments
Cat. No. Sulfur Conc. Sulfur Wt. % UnitD-2622-LL-BL-4 Blank 0.0 4 oz.D-2622-LL-5X-4 5 µg/g 0.0005 4 oz.D-2622-LL-10X-4 10 µg/g 0.0010 4 oz.D-2622-LL-30X-4 30 µg/g 0.0030 4 oz.D-2622-LL-50X-4 50 µg/g 0.0050 4 oz.D-2622-LL-75X-4 75 µg/g 0.0075 4 oz.D-2622-LL-100X-4 100 µg/g 0.010 4 oz.D-2622-LL-300X-4 300 µg/g 0.030 4 oz.D-2622-LL-500X-4 500 µg/g 0.050 4 oz.D-2622-LL-1000X-4 1000 µg/g 0.100 4 oz.
D-2622-LL-CAL-SET $ 450 / 10 x 4 oz.In Isooctane : Toluene (3:1)
Set contains the above 10 individual bottles
Standards can be mixed for quantity discounts
1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard
Cat. No. Sulfur Conc. Sulfur Wt. %D-3120-92-BL Blank ———D-3120-92-1X 1 µg/g 0.0001D-3120-92-3X 3 µg/g 0.0003D-3120-92-10X 10 µg/g 0.0010D-3120-92-30X 30 µg/g 0.0030D-3120-92-50X 50 µg/g 0.0050D-3120-92-75X 75 µg/g 0.0075D-3120-92-100X 100 µg/g 0.010
Well characterized di-n-butyl sulfide is used in a low sulfurIsooctane matrix for this calibration set.
Technical Note
Technical Note
Sulfur StandardsASTM Methods
A well characterized di-n-butyl sulfide starting mat’l is used with alow sulfur Isooctane matrix for RFG/gasoline sulfur standards.
Technical Note
Sulfur Calibration SetD-3120-92-CAL-SET $ 75 / set of 8 x 1 mLIn Isooctane
Sulfur Calibration Standards in Isooctane forGasoline & Reformulated Gasoline Analysis Low Level Sulfur Calibration Standards for use on
XRF Energy Dispersive or Wavelength InstrumentsOriginallydesigned forD-2622-98D-4294-98
Originallydesigned forD-2622-98D-6334-98D-6445-99
Originallydesigned forD-3120-96D-3246-96
Originallydesigned forD-2622-98D-6334-98D-6445-99
Member
AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.
ASTM Methods Sulfur Standards
ASTM D-2789 Hydrocarbon Types in Low Olefinic Gas by MS
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 11
ASTMSULFUR
ASTM-SSTD-A/B-SET $ 100 / 10 x 2 mLThe set contains the following 10 standards in isooctane
(Vol. %)cis-1,2-Dimethylcyclohexane 15.5Benzene 7.7Toluene 10p-Xylene 16.5
(Vol. %)2-Methylpentane 7.22,4-Dimethylpentane 9.4n-Octane 16.6Methylcyclopentane 7.1Methylcyclohexane 10
AccuStandard's TechnicalService Dept. can provideReady-to-Inject working levelcalibration standards to meetunique laboratory applications.Call or fax us your standardrequirements.
Technical NoteSulfur in Residual Oil Standards
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 75 ea $ 65 ea
Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz Bottle $ 75 ea $ 65 ea
Sulfur StandardsASTM Methods
Trace Quantities of Sulfur in LiquidAromatic Hydrocarbons by Oxidative MicrocoulometryASTM-P-0020-PAK $ 75 / 5 x 1 mL1000 µg/mL in Xylenes
Sulfur (as Dibenzothiophene)
Total Sulfur in Aromatic Compoundsby Hydrogenolysis & RateometricColorimetryASTM-P-0010-PAK $ 75 / 5 x 1 mL1000 µg/mL in Toluene
Sulfur (as Thiophene)
Composition Test MixD-2789-CTM $ 40 / 1 x 1 mLD-2789-CTM-PAK SAVE 20% $ 160 / 5 x 1 mL
9 comps.
ASTM Methods Sulfur Calibration Standards
ASTM 2789
Sulfur in Crude Oil Standards
Both the actual volume %ratio and the final weightfractions for each analyte willbe listed on the certificate.
Technical Note
Concentration Sulfur in Crude Oil
µg/g Wt. % Cat. No.1,000 0.10 SCO-10X-42,500 0.25 SCO-25X-45,000 0.50 SCO-50X-4
10,000 1.00 SCO-100X-420,000 2.00 SCO-200X-430,000 3.00 SCO-300X-440,000 4.00 SCO-400X-450,000 5.00 SCO-500X-4
Set of above SCO-CAL-SET-4Cat. No.’s 8 x 4 oz. $ 500
Concentration Sulfur in Crude Oil
µg/g Wt. % Cat. No.3,500 0.35 SRO-35X-47,000 0.70 SRO-70X-4
10,000 1.00 SRO-100X-415,000 1.50 SRO-150X-420,000 2.00 SRO-200X-430,000 3.00 SRO-300X-440,000 4.00 SRO-400X-4
Set of above SRO-CAL-SET-4Cat. No.’s 7 x 4 oz. $ 450
Cat. No. Description Unit
ASTM-SSTDA-BL Sulfur Blank 2 mLASTM-SSTDA-01 Sulfur @ 0.5 µg/g in Isooctane 2 mLASTM-SSTDA-02 Sulfur @ 1.0 µg/g in Isooctane 2 mLASTM-SSTDA-03 Sulfur @ 2.5 µg/g in Isooctane 2 mLASTM-SSTDA-04 Sulfur @ 5.0 µg/g in Isooctane 2 mL
ASTM-SSTDB-BL Sulfur Blank 2 mLASTM-SSTDB-04 Sulfur @ 5.0 µg/g in Isooctane 2 mLASTM-SSTDB-05 Sulfur @ 10.0 µg/g in Isooctane 2 mLASTM-SSTDB-06 Sulfur @ 25.0 µg/g in Isooctane 2 mLASTM-SSTDB-07 Sulfur @ 50.0 µg/g in Isooctane 2 mL
Originallydesigned forD-2789-95
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &Proposed ASTM Sulfur Methods
12 Quality System is Certified to comply with the International ISO 9001 Quality Standard
PIANO
PIANO, PONA, PNA Analysis
PION
APIANO, PONA, PNA
High Aromatic PIAN BlendASTM-P-0037 $ 120 / 100 µL
110 comps.High Aromatic blend contains the PIAN componentsblended to resemble a reformate. The actual certificatewill have the exact weight % for each analyte accurateto four decimal places. Analyte list is drawn fromCat. No.’s: ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034
Low Aromatic PIAN BlendASTM-P-0036 $ 120 / 100 µL
110 comps.Low Aromatic blend contains the PIAN components blended to resemble a light naphtha. The actual certificatewill have the exact weight % for each analyte accurate tofour decimal places. Analyte list is drawn fromCat. No.’s: ASTM-P-0031, ASTM-P-0032, ASTM-P-0033, ASTM-P-0034
AccuStandard has introduced the PIANO line of quantitative and qualitative Petrochemical Standards for class type analysis of petrochemicalsamples or product streams. PIANO analysis involves the determination of the percentage of the following five fractions Paraffins, Isoparaffins,Aromatics, Naphthenes, and Olefins.
PONA analysis involves analyzing the naphtha sample for Paraffins, Olefins, Naphthenes, and Aromatics. If the Isoparaffins and Olefins are notpresent, the analysis is just for PNA.
The PIANO line of standards is used to determine quantitative and qualitative retention times and indices as well as to monitor response factorswithin the hydrocarbon blend. These complex mixes are prepared from materials of the highest available purity, accurate to four decimal places,and include a detailed data sheet on the formulation composition. The typical range for the analytes in each formulation has been provided foreach catalog item. The exact composition on a weight % basis for each analyte has been provided on the certificate, and a disk deliverablespreadsheet is available on request.
Mini Inert Valves SealThe PIANO standards are supplied in convenient to use crimp top vials with Viton septa that resist mineral oil, aliphatic, aromatics hydrocarbons, and higher temperatures. Mini inert valve seals areavailable for an additional $ 25 vial. To order, add “-MIV” to any of the PIANO catalog numbers onthis page.
For individual PIANO descriptions see next page
Standards of Interest
PIANOPONA
PNA
AccuStandard, Your Standards and Technical Information Source!
Total PetroleumHydrocarbon PatternRecognition Standards
BOOK-TPH $ 35
Analytical Standards andReference Material for all209 PCB Congeners
S-3571 $ 25
PIANO MixtureASTM-P-0030 $ 250 / 100 µL
135 comps.The PIANO formulation contains the n-Paraffins,Isoparaffins,Aromatics, Naphthenes, and Olefins from thefive Cat. No.’s: ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034, ASTM-P-0035
Approximate weight percentages for the total: n-Paraffins18.5%, Isoparaffins 17.9%, Aromatics 23.6%, Naphthenes20.9%, Olefins 19.0%.The actual certificate will list the weight % for all analytesin the formulation.
PIANO, PONA, PNA Analysis
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 13
PIANO
PIONA
AccuStandard may add and/or subtractPIANO Analytes and vary the weight %for each Analyte. The certificate willreflect the exact Analyte composition.
Production Note
PIANO, PONA, PNA
Typ. Wt. %3-Methyl-1-butene 1.93961-Pentene 4.13552-Methyl-1-butene 1.44402-Methyl-1,3-butadiene 2.3889trans-2-Pentene 1.8034cis-2-Pentene 1.97924-Methylpentene-1 3.43721-Hexene 7.0484trans-2-Hexene 1.73022-Methylpentene-2 3.3901cis-2-Hexene 3.87651-Heptene 7.6134trans-3-Heptene 3.3469cis-3-Heptene 5.8657trans-2-Heptene 3.7217cis-2-Heptene 5.76791-Octene 7.6901trans-2-Octene 1.9432cis-2-Octene 3.95021-Nonene 7.6425trans-3-Nonene 1.9972cis-3-Nonene 4.0042trans-2-Nonene 1.9848cis-2-Nonene 2.79521-Decene 8.2053
Typ. Wt. %Cyclopentane 4.9143Methylcyclopentane 3.2829Cyclohexane 5.32681,1-Dimethylcyclopentane 3.4612cis-1,3-Dimethylcyclopentane 0.5963trans-1,2-Dimethylcyclopentane 1.4715trans-1,3-Dimethylcyclopentane 2.7531Methylcyclohexane 5.6091Ethylcyclopentane 3.5534ctc-1,2,3-Trimethylcyclopentane 1.5859cct-1,2,4-Trimethylcyclopentane 3.7208ctc-1,2,4-Trimethylcyclopentane 1.6467trans-1,4-Dimethylcyclohexane 3.64991-Ethyl-1-methylcyclopentane 1.0554trans-1,2-Dimethylcyclohexane 1.6537ccc-1,2,3-Trimethylcyclopentane 0.7971Isopropylcyclopentane 3.5042cis-1,2-Dimethylcyclohexane 3.7159n-Propylcyclopentane 3.6438ccc-1,3,5-Trimethylcyclohexane 3.52631,1,4-Trimethylcyclohexane 3.6791ctt-1,2,4-Trimethylcyclohexane 3.6107ctc-1,2,4-Trimethylcyclohexane 3.50691,1,2-Trimethylcyclohexane 3.3354Isobutylcyclopentane 3.7123Isopropylcyclohexane 5.7233n-Butylcyclopentane 3.6944Isobutylcyclohexane 5.6729t-1-Methyl-2-propylcyclohexane 3.8434t-1-Methyl-2-(4MP)cyclopentane 3.7534
PIANO Olefins MixASTM-P-0035 $ 120 / 100 µL25 Olefins listed below at varying Wt. %typically in the range from 1.2 to 9.0 Wt. %.The actual certificate will have the exact Wt. %for each analyte.
PIANO Naphthenes MixASTM-P-0034 $ 120 / 100 µL30 Napthenes listed below at varying Wt. %typically in the range from 0.5 to 8.0 Wt. %. Theactual certificate will have the exact Wt. % foreach analyte.
Typ. Wt. %n-Pentane 9.4375n-Hexane 9.5661n-Heptanea 9.8048n-Octane 9.5518n-Nonane 9.0482n-Decane 9.2517n-Undecane 9.3172n-Dodecane 9.1855n-Tridecane 8.9332n-Tetradecane 8.7989n-Pentadecane 7.1057
Typ. Wt. %Benzene 7.1437Toluene 4.5738EthylBenzene 6.7670m-Xylene 2.2259p-Xylene 4.4815o-Xylene 2.2519Isopropylbenzene 2.2248n-Propylbenzene 4.49791-Methyl-3-ethylbenzene 2.22431-Methyl-4-ethylbenzene 2.22061,3,5-Trimethylbenzene 1.10761-Methyl-2-ethylbenzene 2.26111,2,4-Trimethylbenzene 2.2535tert-Butylbenzene 4.5310Isobutylbenzene 4.4216sec-Butylbenzene 2.23681-Methyl-3-isopropylbenzene 1.10661-Methyl-4-isopropylbenzene 1.06681-Methyl-2-isopropylbenzene 1.12411-Methyl-3-n-propylbenzene 2.11351-Methyl-4-n-propylbenzene 2.2336n-Butylbenzene 2.20871,2-Diethylbenzene 1.09471-Methyl-2-n-propylbenzene 2.26411,4-Dimethyl-2-ethylbenzene 2.28031,3-Dimethyl-5-ethylbenzene 2.28581,2-Dimethyl-4-ethylbenzene 2.25581,3-Dimethyl-2-ethylbenzene 1.14161,2-Dimethyl-3-ethylbenzene 2.18641,2,4,5-Tetramethylbenzene 0.23602-Methylbutylbenzene 1.1453trans-1-Butyl-2-methylbenzene 0.7641n-Pentylbenzene 4.4828t-1-Butyl,3,5-dimethylbenzene 2.1641t-1-butyl-ethylbenzene 2.23221,3,5-Triethylbenzene 4.56711,2,4-Triethylbenzene 1.1087n-Hexylbenzene 4.5029
Typ. Wt. %2,3-Dimethylheptane 1.48703,4-Dimethylheptane 3.74502-Methyloctane 3.75763-Methyloctane 5.60203,3-Diethylpentane 1.57552,2-Dimethyloctane 3.41353,3-Dimethyloctane 3.25822,3-Dimethyloctane 3.88423-Ethyloctane 3.74822-Methylnonane 3.71443-Methylnonane 5.7687
Typ. Wt. %2,2-Dimethylhexane 1.30612,5-Dimethyl hexane 3.69752,2,3-Trimethylpentane 1.73712,4-Dimethylhexane 1.62522,3-Dimethylhexane 1.62122-Methylheptane 4.40734-Methylheptane 3.20153-Methylheptane 5.51863-Ethylhexane 0.69993,3-Dimethylheptane 1.70112,5-Dimethylheptane 5.67313,5-Dimethylheptane 0.7565
Typ. Wt. %Isopentane 2.19282,3-Dimethylbutane 0.44662-Methylpentane 3.28153-Methylpentane 5.38652,2-Dimethylpentane 1.77472,4-Dimethylpentane 3.69932,2,3-Trimethylbutane 3.92913,3-Dimethylpentane 1.18482-Methylhexane 2.23842,3-Dimethylpentane 1.78833-Methylhexane 1.67083-Ethylpentane 0.5080
PIANO Aromatics MixASTM-P-0033 $ 120 / 100 µL38 Aromatics listed below at varying Wt. %typically in the range from 0.2 to 7.0 Wt. %.The actual certificate will have the exact Wt. % for each analyte.
PIANO n-Paraffins MixASTM-P-0031 $ 80 / 100 µL11 paraffins listed below at varying Wt. %typically in the range from 7.0 to 11.0 Wt. %.The actual certificate will have the exact Wt.% for each analyte.
PIANO Mix SetASTM-PIANO-SET $ 700 / 6 x 100 µLSet includes the following Cat. No.:ASTM-P-0030, ASTM-P-0031, ASTM-P-0032,ASTM-P-0033, ASTM-P-0034, ASTM-P-0035
Special PackagingMini inert valve seals are available for an additional $ 25 / vial.To order, add “-MIV” to any of the PIANO cat.# on this page.
PIANOPONA
PNA
PIANO Isoparaffins MixASTM-P-0032 $ 120 / 100 µL35 Isoparaffins listed below at varying Wt. % typically in the range from 0.5 to 6.0 Wt. %. The actualcertificate will have the exact Wt. % for each analyte.
PIANO MixtureASTM-P-0030 $ 250 / 100 µL (135 comps.)The PIANO formulation contains the n-Paraffins, Isoparaffins,Aromatics, Naphthenes, and Olefins fromthe Five Cat. No.’s: ASTM-P-0031, ASTM-P-0032, ASTM-P-0033, ASTM-P-0034, ASTM-P-0035
Approximate weight %’s for the total: n-Paraffins 18.5%, Isoparaffins 17.9%, Aromatics 23.6%,Naphthenes 20.9%, Olefins 19.0%. The certificate lists the weight % for all analytes in the formulation.
14 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM D-2887 Boiling Range Distribution of Petroleum Fractions by GC
Detailed Hydrocarbon Analysis
AccuStandard offers a hydrocarbon window defining standard with the C8 to C40 odd andeven Alkanes. As an added benefit, AccuStandard included pristane and phytane in theformulation. Use of this one standard measuring the C17/ pristane and C18/ phytane ratiocan be used to estimate degradation of fuel oil.
If you prefer, AccuStandard has also developed a fuel oil degradation mixture containingjust the four required analytes to determine the C17/pristane and C8/ phytane ratioCatalog Numbers DRH-005S-10X.
Technical Note
This sample is a petroleum fractionhaving a boiling range from 250°F to850°F, evaluated in round robinstudies by the ASTM D-02committee. Use of this sample andthe supplied ASTM boiling rangeconsensus values helps to evaluatesystem performance
Technical NoteTriacontanen-HentriacontaneDotriacontaneTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontane
Wt. %n-Octadecane 5n-Eicosane 2n-Tetracosane 2n-Octacosane 1n-Dotriacontane 1n-Hexatriacontane 1n-Tetracontane 1n-Tetratetracontane 1
Wt. %n-Hexane 6n-Heptane 6n-Octane 8n-Nonane 8n-Decane 12n-Undecane 12n-Dodecane 12n-Tetradecane 12n-Hexadecane 10
Column Test MixtureASTM-D2887 $ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.
n-Hexadecane n-Octadecane
HeptadecaneOctadecanePhytane (2,6,10,14-Tetramethylhexadecane)Pristane (2,6,10,14-Tetramethylpentadecane)
NonadecanePhytaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosane
OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecaneOctadecanePristane
Detailed Hydrocarbon Analysis
Fuel Oil Degradation/Retention Time Mix for Quantification of C17/Pristane & C18/Phytane ratiosDRH-005S-10X $ 20 / 1 x 1 mL2.0 mg/mL each in CH2Cl2 : CS2 (1:1) 4 comps.
Calibration MixDRH-002N $ 10 / 100 mgDRH-002N-10X $ 40 / 1 gm
17 comps.
Complete Hydrocarbon AnalysisHydrocarbon WindowDefining Standard*DRH-008S-R2 $ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.
Method 2887DHA
Proposed ASTM Method for Detailed Hydrocarbon Analysis (DHA)Determination of Individual Components and Groups of Components in Spark Ignition Engine fuels byHigh Efficiency Open Tubular Column Gas Chromatography (Detailed Hydrocarbon Analysis)
Detailed Hydrocarbon Analysis (includes oxygenates)ASTM-P-0038 $ 120 / 100 µL30 Analytes listed below at varying targeted weight %. The actual certificate will has the exact Wt. % for each analyte.
p-XyleneEthylbenzeneOctane2,3-DimethylheptaneNonane5-Methylnonane1-Ethyl-2-methylbenzene
BenzeneCyclohexane3-Ethylpentanet-1,2-DimethylcyclopentaneHeptane2,2,3-Trimethylpentane2,3,3-TrimethylpentaneToluene
EthanolPentane2-Methyl-2-propanol2-Methylbutene2,3-DimethylbutaneMethyl-t-butyl etherHexaneMethylcyclopentene
DecaneUndecane1,2,3,5-TetramethylbenzeneNaphthaleneDodecane1-MethylnaphthaleneTridecane
DHA - PONA-VI (PONA 6) is aqualitative mixture of variousgasoline and refinery materialsprepared to provide nearly everycomponent that may be encounteredin feedstock and finished gasolines.Some oxygenates have been addedto allow this blend to be used forDHA method setup. This blendcontains approximately 450components (peaks).
ASTM-P-0139 $ 120 / 100 µL
Calibration Solution *DRH-002S-R1 $ 50 / 1 x 1 mLDRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mLAt stated conc. in Chloroform 17 comps.
Calibration Solution *DRH-002S-R2 $ 50 / 1 x 1 gmDRH-002S-R2-PAK SAVE 20% $ 200 / 5 x 1 gm1 % Wt./Wt. each in Chloroform 20 comps.
NEW
µg/mLn-Hexane 600n-Heptane 600n-Octane 800n-Nonane 800n-Decane 1200n-Undecane 1200n-Dodecane 1200n-Tetradecane 1200n-Hexadecane 1000
µg/mLn-Octadecane 500n-Eicosane 200n-Tetracosane 200n-Octacosane 100n-Dotriacontane 100n-Hexatriacontane 100n-Tetracontane 100n-Tetratetracontane 100
n-Tetratetracontanen-Tetracontanen-Hexatriacontanen-Dotriacontanen-Octacosanen-Tetracosanen-Eicosane
n-Octadecanen-Hexadecanen-Tetradecanen-Dodecanen-Undecanen-Decane
NEW
n-Nonanen-Octanen-Heptanen-Hexanen-Pentanen-Pentadecanen-Heptadecane
* Can be shipped by Air and Sea
ASTM D-2887 Reference GasOil Sample Lot #2D-2887-REFOIL $ 35 / 1 x 1 mL
Originally designed for D-2887-99
SIM DIS Standards Simulated Distillation
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 15
Member
ASTMMethod SIM DIS
See ASTM Methods D-3710,D-5307, D-5442, D-6352 foradditional calibrationstandards for hydrocarbonanalysis.
Standards of Interest
AccuStandard designed thefollowing formulations for aProposed ASTM Method underdevelopment for Motor OilVolatility analysis & SIM DISapplications.
Technical Note
Polywax 1000®
ASTM-P-0138N-2G $ 20 / 2 grams
Polywax 1000
Polywax 850®
ASTM-P-0137N-2G $ 20 / 2 grams
Polywax 850
Simulated Distillation (SIM DIS) and Proposed Motor Oil Volatility MethodAccuStandard has developed an extensive line of SIM DIS standards for normal and high temperature analytical requirements when generatingboiling point versus retention time calibration curves. Since normal paraffins above Alkane C60 are not readily available, Polywax 500, Polywax655, Polywax 850 and Polywax 1000 standards have been incorporated to perform SIM DIS analysis of heavy petroleum fractions with boilingpoints up to 1350 °F. If you require additional analytes added to the formulations for extended SIM DIS work, use our custom quotation requestform located in the back of the catalog.
Wt. %n-Tetradecane 0.0333n-Pentadecane 0.0333n-Hexadecane 0.0333n-Heptadecane 0.0333n-Octadecane 0.0333n-Eicosane 0.0333Polywax 500 0.5
Wt. %n-Pentane 0.0333n-Hexane 0.0333n-Heptane 0.0333n-Octane 0.0333n-Nonane 0.0333n-Decane 0.0333n-Undecane 0.0333n-Dodecane 0.0666
Polywax 655®
ASTM-P-0053N-2G $ 20 / 2 grams
Polywax 655
Polywax 500®
ASTM-P-0051N-2G $ 20 / 2 grams
Polywax 500
Working Level SIM DIS Paraffin Solutionwith Polywax 500ASTM-P-0052 $ 40 / 1 x 1 mLASTM-P-0052-PAK SAVE 20% $ 160 / 5 x 1 mLAt stated conc. in Carbon disulfide 15 comps.
Petrochemical Standards
Wt. %n-Dodecane 13.33n-Tetradecane 6.66n-Pentadecane 6.66n-Hexadecane 6.66n-Heptadecane 6.66n-Octadecane 6.66n-Eicosane 6.66
Wt. %n-Pentane 6.66n-Hexane 6.66n-Heptane 6.66n-Octane 6.66n-Nonane 6.66n-Decane 6.66n-Undecane 6.66
Stock SIM DIS Paraffin SolutionASTM-P-0050 $ 85 / 1 x 5 mL
14 comps.
For our complete line of Organic Standards,request a copy of ourOrganic Catalog
For our complete line of Inorganic Standards,request a copy of ourInorganics Catalog
ASTM D-3230 Salts in Crude Oil
ASTM D-3237 Lead in Gasoline by AA Spectroscopy
ASTM D-3231 Phosphorus in Gasoline
ASTM D-3120 & D-3246 Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
16 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method
, ASTM Standards
Sodium chloride 70 µg/mLCalcium chloride 10 µg/mLMagnesium chloride 20 µg/mL
See page 1 for AccuStandard’scomprehensive line of CertifiedSulfur calibration standards,AccuPetroCheck, andAccuPetroTest quality controlproducts.
Standards of Interests
Well characterized di-n-butyl sulfide is usedin a low sulfur Isooctane matrix for thiscalibration set.
Technical NoteCat. No. Sulfur Conc. Sulfur Wt.%
D-3120-BL Blank BlankD-3120-92-1X 1 µg/g 0.0001D-3120-92-3X 3 µg/g 0.0003D-3120-92-10X 10 µg/g 0.0010D-3120-92-30X 30 µg/g 0.0030D-3120-92-50X 50 µg/g 0.0050D-3120-92-75X 75 µg/g 0.0075D-3120-92-100X 100 µg/g 0.010
Method 3120323032313237
D-3231
Meets
EPA Guidelines
for RFG
Analysis
D-3237
Meets
EPA Guidelines
for RFG
Analysis
Element Quantity Cat. No. PriceMatrix Conc.
Phosphorus 100 mL ICP-41W-1 $ 34H2O 1000 µg/mL
Phosphorus 500 mL ICP-41W-5 $ 67H2O 1000 µg/mL
Mixed Salt SolutionD-3230-89-1 $ 75 / 100 mLD-3230-89-5 $ 150 / 500 mLAt stated conc. in Alcohol Solution (1-butanol : MeOH) (ratio 63:37) tr. H2O 3 comps.
Sulfur Calibration SetD-3120-92-CAL-SET $ 75 / set of 8 x 1 mLIn Isooctane
Lead Standard Calibration CurveD-3237-CAL-SET $ 210 / 4 x 100 mLSet includes the following Catalog Numbers:
Cat. No. Description Price / UnitD-3237-01 Blank 1% Aliquot 336/MIBK $ 20 / 100 mLD-3237-02 0.02 g Pb / gal ( 5.3 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mLD-3237-03 0.05 g Pb / gal ( 13.2 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mLD-3237-04 0.10 g Pb / gal ( 26.4 mg Pb/ L) in 1% Aliquat 336 / MIBK $ 80 / 100 mL
Working Level Standards &Continuing Calibration Check (CCC)
Ready-to-Inject Petrochemical Standards and Calibration Curves
Reduce Costs
Increase Time Spent for Sample Analysis
Are Validated Against Independent Lots
Include Internal Standards or Surrogates
Follow ASTM Method Guidelines
Allow Direct Transfer to Autosampler Vials
Ready-to-Inject
Member
ASTM
Originally designed forD-3120-96D-3246-96
Originally designed forD-3230-99
Originally designed for D-3231-99
Originally designed forD-3237-97
ASTM D-3605 Trace Metals in Gas Turbine Fuels by AA &(Reapproved 1995) Flame Emission Spectroscopy
ASTM D-3524 (Reapproved 1999) Diesel Fuel Diluent in Used Diesel Engine Oils by GC
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 17
ASTM
Technical Note
ASTM Standards
Column Resolution MixD-3524-CR $ 10 / 1 x 1 mLD-3524-CR-PAK SAVE 20% $ 40 / 5 x 1 mLAt stated conc. in n-Heptane 2 comps.
Wt. / Wt. %n-Hexadecane 1.0n-Octadecane 1.0
Internal Standard SolutionD-3524-IS-10ML $ 25 / 1 x 10 mLD-3524-IS-10ML-PAK SAVE 20% $ 100 / 5 x 10 mLAt stated conc. in n-Heptane 2 comps.
Wt. / Wt. %n-Decane 1.0n-Octadecane 0.2
Method 3246334035243605
ASTM D-3246 Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D-3340 Lithium & Na in Lubricating Greases by Flame Photometer
* For your convenience these elements arealso available in HNO3. To order HNO3
change the H to N at the end of the Cat. No.
Test toLow ppb
Sulfur
Mid Level Daily QC SolutionD-3524-QC-10ML $ 30 / 1 x 10 mL
2 comps.Wt. / Wt. %
# 2 Diesel 5.030 W Motor oil 95
See pages 6 - 11 for AccuStandards comprehensive line of certified sulfur calibration standards
AccuStandard AccuTrace brand AA standards are produced under our rigorous ISO 9001 quality system toexacting specifications. Each standard is prepared from high purity starting materials; deionized water andhigh purity acids. Every standard is instrumentally assayed to verify 1000 ppm concentration of specifiedelement; Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.
D-3524 Calibration CurveD-3524-CAL-SET-5ML $ 150 / set of 6 x 5 mLD-3524-CAL-SET-10ML $ 250 / set of 6 x 10 mL
Analyte Standard 1 Standard 2 Standard 3 Standard 4 Standard 5 Standard 6Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. %
# 2 Diesel 10 7.5 5 2.5 1 030 W Motor oil 90 92.5 95 97.5 99 100
Element Unit Cat. No. Price
Matrix 1,000 µg/mL
Lithium * 100 mL AA30H-1 $ 12HCl 500 mL AA30H-5 30
Sodium * 100 mL AA54H-1 13HCl 500 mL AA54H-5 33
Ca (Calcium) (250 µg/mL)V (Vanadium) (250 µg/mL)
Na (Sodium) (250 µg/mL)Pb (Lead) (250 µg/mL)
See Table of Contents for theWear Metals Group pages
Standards of InterestsD-3605-91 Trace Metals StandardD-3605-91-1 $ 165 / 1 x 100 mLAt stated conc. in 1,2,3,4-Tetrahydronaphthalene 4 comps.
Member
See Pages 6-11
Originally designed forD-3340-98
Originally designed forD-3524-90
Originally designed forD-3605-91
WEAR M
ETALS
18 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
D-3606
Meets
EPA Guidelines
for RFG
Analysis
ASTM Standards
ASTM D-3606 Benzene & Toluene in Finished Motor & Aviation Gasoline by GC
Aromatics Quantitative Calibration Standard (with Internal Standard: MEK)D-3606/IS-SET $ 115 / set of 7 x 1 mLD-3606/IS-SET-2ML $ 190 / set of 7 x 2 mLD-3606/IS-SET-2ML-PAK $ 760 / 5 x (7 x 2) mL
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624Methyl ethyl ketone (Internal Std.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0
Due to changes in the possibleuse of other oxygenates likeethanol added to gasoline,AccuStandard formulated anew calibration curve usingsec-butanol as an InternalStandard. The use of this newISTD minimizes coelutioncaused by the oxygenate(s)and pre column - standardcolumn configuration in the GCsystem.
Technical Note
Daily Quality Control Standard(without Internal Standard)D-3606-QC-25ML $ 125 / 1 x 25 mLD-3606-QC-25ML-PAK $ 600 / 5 x 25 mLEach at stated quantities 3 comps.
Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33
100
Gasoline Refinery Quality Control StandardsDaily Quality Control Standard(with Internal Standard: sec Butanol)D-3606-QC-IS2-25ML $ 125 / 1 x 25 mLD-3606-QC-IS2-25ML-PAK $ 600 / 5 x 25 mLEach at stated quantities 4 comps.
Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568sec-Butanol (ISTD) 4.0
100
Aromatics Quantitative Calibration Standard (w/ Internal Standard: sec Butanol)D-3606/IS2-SET $ 115 / set of 7 x 1 mLD-3606/IS2-SET-PAK $ 500 / 5 x (7 x 1) mL
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624sec Butanol (Internal Standard) 4.0 4.0 4.0 4.0 4.0 4.0 4.0
Daily Quality Control Standard(with Internal Standard: MEK)D-3606-QC/IS-10ML $ 75 / 1 x 10 mLD-3606-QC/IS-10ML-PAK $ 300 / 5 x 10 mLEach at stated quantities 4 comps.
Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568Methyl ethyl ketone (ISTD) 4.0
100
Daily Quality Control Standard(without Internal Standard)D-3606-QC-25ML $ 125 / 1 x 25 mLD-3606-QC-25ML-PAK $ 600 / 5 x 25 mLEach at stated quantities 3 comps.
Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33
100
Gasoline Refinery Quality Control Standards
Aromatics Quantitative Calibration Standard (without Internal Standards)D-3606-SET-25ML $ 800 / set of 7 x 25 mL
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Benzene 0.06 - 5.0 5.00 2.50 1.25 0.67 0.33 0.12 0.06Toluene 0.5 - 20 20.00 15.00 10.00 5.00 2.50 1.00 0.50Isooctane 75.00 82.50 88.75 94.33 97.17 98.88 99.44
ASTM D-3610 Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration
Cobalt Oxide StandardD-3610-93-1 $ 50 / 1 x 100 mL
Cobalt oxide @ 1500 µg/mL in Water
Method 36063610
, Member
Originally designed forD-3606-99
Originally designed forD-3610-88 (Re-Approved 1993)
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 19
ASTM
Test toLow ppb
SulfurSee Pages 6-11
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
There is an easier way to get Chemical Reference Standards
e-Standards® from AccuStandard.com
Over 30,000 Standardsjust a click away
On-Line Ordering
5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:
Catalog Number
Single or Multiple Components,
Method (EPA, ASTM, etc.)
Chemical Category (Organic, Inorganic, Petroleum, etc.)
Other Companies’ Part Number
Log on to www.accustandard.com and see how easy it is.
Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, see
details on website.
On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.
ASTM D-3831 Manganese in Gasoline by AA Spectroscopy
ASTM D-3710 (Reapproved 1999) Boiling Range Distribution of Gasoline & Gasoline Fractions by GC
20 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method 37103798
, 3831
See page 3 for AccuStandard’snew D-86 QA/QC Standards.
Standards of Interests
ASTM Standards
Technical NoteBulk Packaged p-Xylenewithout Internal StandardOther suggested internalstandards can be used inconjunction with the bulkpackaged D-3789 1 x 10 mLampule to meet your company’sapplication. If you prefer toeliminate making standards,contact AccuStandard’sTechnical Department with yourunique formulation for a customquotation. The customquotation request form islocated in the back of thiscatalog.
Manganese Stock SolutionD-3831 $ 65 / 1 x 100 mL
Manganese @ 1.0 g Mn / gal (264.2 mg Mn / L) in Methyl isobutyl ketone
n-Octane 5.8n-Pentadecane 2.3n-Pentane 8.1n-Propylbenzene 4.7n-Tetradecane 2.3Toluene 11.6n-Tridecane 2.3p-Xylene 14.0
Vol./Vol. %n-Butylbenzene 3.5n-Decane 3.52,4-Dimethylpentane 5.8n-Dodecane 3.5n-Heptane 10.5n-Hexane 5.82-Methylbutane 10.52-Methylpentane 5.8
Vol./Vol. %
Approx.Wt./ Wt. %
n-Octane 5.4n-Pentadecane 2.2n-Pentane 7.6n-Propane 1.5n-Propylbenzene 4.3n-Tetradecane 2.2Toluene 10.8n-Tridecane 2.2p-Xylene 13
Approx.Wt./ Wt. %
n-Butane 4.5n-Butylbenzene 3.2n-Decane 3.22,4-Dimethylpentane 5.4n-Dodecane 3.2n-Heptane 9.7n-Hexane 5.42-Methylbutane 9.72-Methylpentane 5.42-Methylpropane 1.5
Quantitative Calibration StandardASTM-D3710 $ 25 / 1 x 1 mLASTM-D3710-PAK SAVE 36% $ 80 / 5 x 1 mL
16 comps.
Qualitative Calibration StandardD-3710-QUAL $ 30 / 1 x 1 mLD-3710-QUAL-PAK SAVE 20% $ 120 / 5 x 1 mL
19 comps.
ASTM D-3798 Analysis of p-Xylene by GC
This SIM DIS (Simulated Distillation or GCD) Method is used to determine the boiling range distribution ofgasoline and gasoline components. ASTM Method D-3710 is used for petroleum products and fractionswith a final boiling point of 500°F (260°C) or lower. By having an insight into the composition of thegasoline blend, essential data for the calculation of vapor pressure and a prediction of the D-86 distillationcurve can be made.
p-Xylene Impurity Standard without ISTDD-3798-10ML $ 65 / 1 x 10 mLD-3798-10ML-PAK SAVE 20% $ 260 / 5 x 10 mLAt stated conc. by weight 10 comps.
p-Xylene Impurity Standardwith ISTDD-3798-IS $ 30 / 1 x 1 mLD-3798-IS-PAK SAVE 33% $ 100 / 5 x 1 mLAt stated conc. by weight 11 comps.
AccuStandard’s R & D team has developed a special highly purified p-Xylene designed for ASTM MethodD-3798 specifications. The incorporation of this p-Xylene into the formulation allows the analytical chemistto qualitatively and quantitatively measure the impurities in the p-Xylene feedstock streams.
Wt./Wt. %n-Pentane 0.15n-Octane 0.15Benzene 0.15Toluene 0.15Ethylbenzene 0.15p-Xylene 98.65m-Xylene 0.15
Wt./Wt. %o-Xylene 0.15Cumene 0.15Propylbenzene 0.15
Total Analytes 100plus n-Undecane* (ISTD) 0.500grams
Wt./Wt. %n-Pentane 0.15n-Octane 0.15Benzene 0.15Toluene 0.15Ethylbenzene 0.15
Wt./Wt. %p-Xylene 98.65m-Xylene 0.15o-Xylene 0.15Cumene 0.15Propylbenzene 0.15
ASTM D-2887-99 Boiling Range Distribution of Petroleum Fractions by GCCalibration Solution *DRH-002S-R1 $ 50 / 1 x 1 mLDRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mLAt stated conc. in Chloroform 17 comps.
µg/mLn-Hexane 600n-Heptane 600n-Octane 800n-Nonane 800n-Decane 1200
µg/mLn-Undecane 1200n-Dodecane 1200n-Tetradecane 1200n-Hexadecane 1000
NEW
µg/mLn-Octadecane 500n-Eicosane 200n-Tetracosane 200n-Octacosane 100
µg/mLn-Dotriacontane 100n-Hexatriacontane 100n-Tetracontane 100n-Tetratetracontane100
* Can be shipped by Air and Sea
ASTM
Member
Originally designed forD-3710-95
Originally designed forD-3831-98
ASTM D-4291 (Reapproved 1998) Trace Ethylene Glycol in Used Engine Oil
ASTM D-4059 Polychlorinated Biphenyls in Insulating Liquids by GC
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 21
Member
ASTMMethod 4059
429142944377
Additional Aroclors andPCB Congener Standardsavailable in our OrganicCatalog
Ethylene Glycol Stock StandardD-4291-93 $ 20 / 1 x 1 mLD-4291-93-PAK SAVE 20% $ 80 / 5 x 1 mL
Ethylene glycol @ 2000 µg/mL in water
PAK Cat. No.
Aroclor 1016 C-216N $ 25 / 100 mg 100 mgAroclor 1221 C-221N 25 / 100 mg 100 mgAroclor 1232 C-232N 25 / 10 mg 10 mgAroclor 1242 C-242N 25 / 100 mg 100 mgAroclor 1248 C-248N 25 / 10 mg 10 mgAroclor 1254 C-254N 25 / 100 mg 100 mgAroclor 1260 C-260N 25 / 100 mg 10 mgAroclor 1262 C-262N 25 / 100 mg 10 mgAroclor 1268 C-268N 25 / 10 mg 10 mg
Kit of above 9 Aroclors Z-008 $ 125 / 9 vials
Z-008
Aroclor # Cat. No. Price / Unit (Kit)
Neat Individual Aroclors
5 x 1 mLPrice
Aroclor 1016 50 C-216-ST-1 $ 25 C-216-ST-1-PAK $ 90Aroclor 1016 500 C-216-ST-2 30 C-216-ST-2-PAK 120
Aroclor 1221 50 C-221-ST-1 25 C-221-ST-1-PAK 90Aroclor 1221 500 C-221-ST-2 30 C-221-ST-2-PAK 120
Aroclor 1232 50 C-232-ST-1 25 C-232-ST-1-PAK 90Aroclor 1232 500 C-232-ST-2 30 C-232-ST-2-PAK 120
Aroclor 1242 50 C-242-ST-1 25 C-242-ST-1-PAK 90Aroclor 1242 500 C-242-ST-2 30 C-242-ST-2-PAK 120
Aroclor 1248 50 C-248-ST-1 25 C-248-ST-1-PAK 90Aroclor 1248 500 C-248-ST-2 30 C-248-ST-2-PAK 120
Aroclor 1254 50 C-254-ST-1 25 C-254-ST-1-PAK 90Aroclor 1254 500 C-254-ST-2 30 C-254-ST-2-PAK 120
Aroclor 1260 50 C-260-ST-1 25 C-260-ST-1-PAK 90Aroclor 1260 500 C-260-ST-2 30 C-260-ST-2-PAK 120
Aroclor 1262 50 C-262-ST-1 25 C-262-ST-1-PAK 90Aroclor 1262 500 C-262-ST-2 30 C-262-ST-2-PAK 120
Aroclor 1268 50 C-268-ST-1 25 C-268-ST-1-PAK 90Aroclor 1268 500 C-268-ST-2 30 C-268-ST-2-PAK 120
Cat. No.1 x 1 mL
PriceConc.
(ppm w/w)Aroclor #
ASTM Standards
ASTM D-4294 Sulfur in Petroleum Products by ED-XRF Spectroscopy
ASTM D-4377 Water in Crude oils by Potentiometric Karl Fischer Titration
D-4294
Meets
EPA Guidelines
for RFG
Analysis
Aroclor-free transformer oil also available as:
T-W130 $ 5 / 1 x 1 mL
See page 8-11 for AccuStandard’s comprehensive line of Certified Sulfur Calibration Standardsdesigned for matrix specific applications as described in Method D-4294 in section 9.0(Calibration & Standardization).
See page 5 for AccuStandard’s comprehensive line of Certified Karl Fischer Water Standards.
Aroclors in PCB-Free Transformer Oil (At 2 concentrations in Transcrest W130)
Originally designed forD-4059-96
Originally designed forD-4291-93
ASTM D-4628 Barium, Calcium, Magnesium & Zinc in Unused Lubricating Oil
ASTM D-4420 Aromatics in Finished Gasolines by GC
22 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method 44204628
,
Ready-to-Inject Petrochemical Standardsand Calibration Curves
Reduce CostsIncrease Time Spent for Sample AnalysisAre Validated Against Independent LotsInclude Internal Standards or SurrogatesFollow ASTM Method GuidelinesAllow Direct Transfer to Autosampler Vials
See Table of Contents for theWear Metals Group pages.
Standards of Interests
Vol. %n-Butylbenzene(C9 + aromatics) 15.00Isooctane 57.00
Vol. %Benzene 3.00Toluene 10.00Total Xylenes (C8 aromatics) 15.00
Aromatics in Gasoline by GC/TCD-4420-CAL-SET $ 105 / set of 7 x 1 mL
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Target Target Target Target Target Target TargetVol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %
Benzene 0.05 0.10 0.25 0.75 1.25 2.50 5.00Toluene 0.5 1.00 2.50 5.00 10.00 15.00 25.00Total Xylenes (C8 aromatics) 5 10.00 15.00 20.00 25.00 1.00 3.00n-Butylbenzene (C9 + aromatics) 30.00 25.00 20.00 10.00 5.00 15.00 2.50Isooctane 64.45 63.90 62.25 64.25 58.75 66.50 64.50
Aromatics in Gasoline by GC/TXD-4420-94 $ 20 / 1 x 1 mLD-4420-94-PAK $ 80 / 5 x 1 mL
5 comps.
ASTM Standards
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
Lubricating Oil, Elements (Nominal Value) Wt.% listed belowASTM-P-0113-SET $ 2850 / 17 x 100 mL
Ba Ca Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000
ASTM
Member
Originally designed forD-4420-94
Originally designed forD-4628-97
WEA
R M
ETAL
S
ASTM D-4629 Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet OxidativeCombustion and Chemiluminescence Detection. IP Designation 379/88
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 23
Member
ASTMMethod 4629
Nitrogen introduced using Pyridine
Technical Note
Nitrogen Calibration Set-High Boiling SolventsD-4629-91-HB-CAL-SET $ 75 / set of 7 x 1 mL
Set includes the following Cat. No.s
Cat. No. Description Price / Unit
D-4629-91-HB-0.3X Nitrogen @ 0.3 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-1X Nitrogen @ 1 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-10X Nitrogen @ 10 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-25X Nitrogen @ 25 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-50X Nitrogen @ 50 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-75X Nitrogen @ 75 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-100X Nitrogen @ 100 µg/mL in Toluene $ 20 / 1 x 1 mL
Nitrogen introduced using Carbazole
Technical Note
Nitrogen introduced using Aniline
Technical Note
The Nitrogen is introduced using Aniline and theSulfur is introduced using di-n-Butyl sulfide
Technical NoteLow level Nitrogen &Sulfur Calibration SetASTM-P-0071-SET $ 50 / 4 x 1 mL
Set includes the following Cat. No.s
Cat. No. Description Unit
ASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mL
Low level Nitrogen Calibration SetASTM-P-0070-SET $ 75 / 6 x 1 mLSet includes the following Cat. No.s
Cat. No. Description Unit
ASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mL
Stock Nitrogen Solution for High Boiling SolventsD-4629-91-HB-CON $ 20 / 1 x 1 mLD-4629-91-HB-CON-PAK SAVE 20% $ 80 / 5 x 1 mL
Nitrogen @ 1000 µg/mL in Toluene : Acetone (9:1)(Carbazole @ 11.95 mg/mL in Toluene : Acetone (9:1) )
Stock Nitrogen Solution for Low Boiling SolventsD-4629-91-LB-CON $ 20 / 1 x 1 mLD-4629-91-LB-CON-PAK $ 80 / 5 x 1 mL
Nitrogen @ 1000 µg/mL in Isooctane (Pyridine @ 5.65 mg/mL in Isooctane)
Nitrogen Calibration Set-Low Boiling SolventsD-4629-91-LB-CAL-SET $ 75 / set of 7 x 1 mL
Set includes the following Cat. No.s
Cat. No. Description Price / Unit
D-4629-91-LB-0.3X Nitrogen @ 0.3 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-1X Nitrogen @ 1 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-10X Nitrogen @ 10 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-25X Nitrogen @ 25 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-50X Nitrogen @ 50 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-75X Nitrogen @ 75 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-100X Nitrogen @ 100 µg/mL in Isooctane $ 20 / 1 x 1 mL
ASTM Standards
Method D-4629 is used to determine trace total nitrogen naturally found in liquid hydrocarbons boiling from50 to 400°C with viscosities between 0.2 and 10 cSt. This method monitors feed stocks for nitrogen toprevent the poisoning of some process catalysts when trace nitrogenous materials are present.
Originally designed forD-4629-96
ASTM D-4815 MtBE, EtBE, TAME, DIPE, Tertiary-amyl Alcohol and C1 to C4 Alcohols in Gasoline by GC
24 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
Method 4815
,
Additional Oxygenatecalibration, check standards,and independent referencestandards can be found inASTM method D-5599 (pages34-36) or D-5622-94 (page 37)The required QA/QC proceduresin EPA methods stipulate acalibration check standard beused once per analytical batchor per 10 sample set.AccuStandard has bulkpackaged our check standardsto meet this increased usage.
Technical Note
ASTM Standards
Oxygenate Free Refinery Gasoline BlankM-GRO-BLNK-10ML $ 10 / 1 x 10 mLM-GRO-BLNK-10ML-PAKSAVE 20% $ 40 / 5 x 10 mL
RFA Gasoline (neat)
Oxygenate Internal Standard MixtureM-GRO-IS-5ML $ 10 / 1 x 1 mLM-GRO-IS-5ML-PAK SAVE 20% $ 40 / 5 x 1 mL
1,2-Dimethoxyethane (ISTD) (neat)
Calibration Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Range Wt. % Wt. % Wt. % Wt. % Wt. %
Ethanol 0.1 - 11.40 2.85 0.10 5.70 8.55 11.40t-Butanol 0.1 - 11.40 0.10 2.85 5.70 7.60 11.40Methyl t-butyl ether (MtBE) 0.1 - 19.0 19.00 14.25 9.50 4.75 0.10t-Pentanol 0.1 - 4.79 1.19 4.75 2.38 3.56 0.101,2-Dimethoxyethane (DME) (Internal Std.) 5.00 5.00 5.00 5.00 5.00Isooctane/xylene (65:35) 71.87 73.06 71.73 70.54 72.0
Total Oxgenates & Internal Standard 28.14 26.95 28.28 29.46 28.00
Oxygenate Quantitative Calibration Mixtures (with Internal Standard)D-4815/IS-SET of 6 component mix $ 125 / set of 5 x 1 mLD-4815/IS-SET-PAK $ 500 / set of 5 x (5 x 1 mL)
Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Wt. % Wt. % Wt. % Wt. % Wt. %
Ethanol 3.00 0.10 6.00 9.00 12.00t-Butanol 0.10 3.00 6.00 8.00 12.00Methyl t-butyl ether (MtBE) 20.0 15.00 10.00 5.00 0.10t-Pentanol 1.25 5.00 2.50 3.75 0.10Isooctane/xylene (65:35) 75.65 76.90 75.50 74.25 75.80
D-4815
Meets
EPA Guidelines
for RFG
AnalysisOxygenate Quantitative Calibration Mixtures (without Internal Standard)D-4815-SET-10ML $ 300 / set of 5 x 10 mL of 5 component mix
Valve Timing MixtureD-4815-VT $ 25 / 1 x 1 mLD-4815-VT-PAK SAVE 20% $ 100 / 5 x 1 mL
5 comps.Compound Wt. %Methylcyclopentane 10.00Diisopropyl ether (DIPE) 10.00Ethyl tert-butyl ether (EtBE) 10.00Methyl tert-butyl ether (MtBE) 10.00n-Hexane 60.00
Quantitative Peak ID andRetention Time MixtureD-4815-RT $ 25 / 1 x 1 mLD-4815-RT-PAK SAVE 20% $ 100 / 5 x 1 mL
Compound Wt. %Methylcyclopentane 4.00Methanol 7.30Ethanol 7.30Isopropanol 7.30tert-Butanol 7.30n-Propanol 7.30Methyl tert-butyl ether (MtBE) 4.00sec-Butanol 7.30Diisopropyl ether (DIPE) 4.00Isobutanol 7.30Ethyl tert-butyl ether (EtBE) 4.00tert-Pentanol 7.301,2-Dimethoxyethane (ISTD) 6.00n-Butanol 7.30Benzene 5.00tert-Amyl methyl ether 7.30
10016 comp. core mix
Member
Test toLow ppb
SulfurSee Pages 6-11
Originally designed forD-4815-99
Custom FormulationsAccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a custom formulation.Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. To make an inquiry for CustomQuotes visit our website.
You can also Email your requirements to [email protected] or Fax us at 203-786-5287. Please include the following information:List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (milliliters per ampule, bottle, or vial).
Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (where available). Everycomponent in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. The solutions are made up to volumeusing class A glassware. A certificate comes with each standard and documents the gravimetric values used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plus statisticalanalysis. A data package is provided containing analytical and gravimetric data (Organic customs only).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
ASTM D-4928 Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D-4929 Organic Chloride Content in Crude Oil - Test Method BCombustion and Microcoulometry
ASTM D-4927 Elemental Analysis of Lubricant and Additive Components - Barium, Calcium,Phosphorus, Sulfur, and Zinc by WD-XRF Spectroscopy
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 25
Member
ASTMMethod 4927
49284929
See Table of Contents for theWear Metals Group pages
Standards of Interests
Custom Ampulling for Bulk Quantity RequirementsAutomated ampule filling & sealing 0.2 mL up to 20 mLQuantities from 500 to over 500,000 ampules Homogeneity testing Amber ampules for added product stability Private labeling and packaging
We can reduce your costs using the CozzoliAuto Filling/ Sealing Machine to package justthe right size product for your application.
Standards of InterestsSee page 66 for additionalproposed and promulgatedChlorine in Lube Oil standards
See page 5 for AccuStandard’s new line of Karl Fischer Water Standards.
Lubricating Oil, Elements (Nominal Value) Wt.% listed belowASTM-P-0110-SET $ 2300 / 17 x 100 mL
Ba Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000
ASTM Standards
Stock Chlorine StandardD-4929-94-100X $ 15 / 1 x 5 mLD-4929-94-100X-PAK SAVE 20% $ 60 / 5 x 5 mL
Chlorine @ 1000 µg/mL in Isooctane
Working Level Chlorine StandardD-4929-94 $ 10 / 1 x 5 mLD-4929-94-PAK SAVE 20% $ 40 / 5 x 5 mL
Chlorine @ 10 µg/mL in Isooctane
Originally designed forD-4927-96
Originally designed forD-4929-99
WEAR M
ETALS
ASTM D-5056 Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D-4951 Additive Elements in Lubricating Oils byInductively Coupled Plasma Atomic Emission Spectrometry
26 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
Method 49515056
,
See Table of Contents for theWear Metals Group pages.
Standards of Interests20 Wear Metal Multi-Element Standardcontaining no metallic sulfonates
ASTM Standards
Recommended Internal Standard (IS)
Each Wear Metal Standard contains the belowlist of 20 elements in hydrocarbon oil at thestated concentration
Conc. Cat. No. Price(µg/g)
10 WM-20-NMS-1X-1 $ 15030 WM-20-NMS-3X-1 15050 WM-20-NMS-5X-1 150100 WM-20-NMS-10X-1 170300 WM-20-NMS-30X-1 230500 WM-20-NMS-50X-1 350900 WM-20-NMS-90X-1 500
WM-20-NMS-SET-1 $ 1450set of above 7 x 100 mL
Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)
Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)
This calibration curve has beenformulated with startingmaterials containing no metalsulfonates. This way a sulfurcalibration curve can easily bedeveloped using a highconcentration sulfur standard.
Technical Notes
Element @ 1000 µg/mL Unit Cat. No. PriceMatrix
Silicon 100 mL AA52W-1 $ 13
H2O tr. NaOH 500 mL AA52W-5 33
* Sodium 100 mL AA54N-1 13
HNO3 500 mL AA54N-5 33
Vanadium 100 mL AA67N-1 13
HNO3 500 mL AA67N-5 33
* For your convenience these elements are available in HCl. To order, change the N to H at the end of the catalog numbers.
Element @ 1000 µg/mL Unit Cat. No. PriceMatrix
* Aluminum 100 mL AA01N-1 $ 13
HNO3 500 mL AA01N-5 33
* Calcium 100 mL AA09N-1 12
HNO3 500 mL AA09N-5 30
* Iron 100 mL AA27N-1 12
HNO3 500 mL AA27N-5 30
Nickel 100 mL AA37N-1 12
HNO3 500 mL AA37N-5 30
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
Member
Sulfur free Organometallic (IS) Sulfur free Organometallic (IS) Element @ 1000 µg/g Price @ 5000 µg/g Price
Cat. No. 50 mL Cat. No. 50 mL
Cobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110
Originally designed forD-4951-96
Originally designed forD-5056-96
WEA
R M
ETAL
S
ASTM D-5059 Lead in Gasoline by X-Ray Spectroscopy IP Designation 228/79
ASTM D-5134 Petroleum Naphthas through n-Nonane by Capillary GC
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 27
Member
ASTMMethod 5059
5134
2-Methylheptane2-Methylhexanen-Nonanen-OctaneToluene
Benzene2,4-Dimethylheptane2,4-Dimethylhexanen-Heptanen-Hexane
Linearity Check MixD-5134-92-LCM $ / 1 x 1 mL10% w/w each component 10 comps.
See page 14 for additionalDetailed Hydrocarbon Analysis(DHA) blends.
Standards of Interests
AccuStandard has formulated the following standards to measure the lead content in gasoline for bothhigh and low concentrations using bismuth as an internal standard. For long term stability and ease ofuse AccuStandard provides the internal standard in two convenient packaging sizes. The bulk 4 oz.bottles are designed for laboratories analyzing many samples while the 10 mL ampules are forlaboratories that have limited requests for the test method. Should you require bulk quantities of theinternal standard conveniently packaged in single-use ampules, contact AccuStandard’s technicaldepartment for a quotation. Bulk volumes of 250 mL or more can be sealed into ampules (your choiceup to 20 mL size). Use of our ampulling services can provide substantial saving for the Laboratory.
Technical Notes
ASTM Standards
Wt. / Wt. %4-Methylheptane 1.0n-Octane 1.02-Methylpentane 94.5
Wt. / Wt. %Toluene 0.5n-Heptane 1.02,3,3-Trimethylpentane 1.02-Methylheptane 1.0
Column Evaluation MixD-5134-92-CEM $ 35 / 1 x 1 mL
7 comps.
All D-5059 Certificates have theconcentrations for the Standard listedin three convenient LeadConcentration units.
Technical Notes
Cat. No. Lead Concentration Price /g Pb/US gal g Pb/ UK gal µg Pb/mL Unit
D-5059-C-01 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-C-02 0.0010 0.001 0.264 80 / 4 ozD-5059-C-03 0.0050 0.006 1.321 80 / 4 ozD-5059-C-04 0.0100 0.012 2.642 80 / 4 ozD-5059-C-05 0.0500 0.060 13.209 80 / 4 ozD-5059-C-06 0.1000 0.120 26.417 80 / 4 ozD-5059-C-07 0.3000 0.360 79.252 80 / 4 oz
Cat. No. Lead Concentration Price /g Pb/US gal g Pb/ UK gal mg Pb/mL Unit
D-5059-A-01 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-A-02 0.1000 0.120 0.026 80 / 4 ozD-5059-A-03 1.0000 1.200 0.264 80 / 4 ozD-5059-A-04 2.0000 2.400 0.528 80 / 4 ozD-5059-A-05 3.0000 3.600 0.793 80 / 4 ozD-5059-A-06 4.0000 4.800 1.057 80 / 4 ozD-5059-A-07 5.0000 6.000 1.321 80 / 4 oz
Internal StandardD-5059-IS-4 $ 80 / 1 x 4 oz bottleD-5059-IS-10ML-PAK $ 60 / 5 x 10 mL amps
Bismuth @ 0.793 mg/mL (3.00 g/US gal) (3.60 g/UK gal) in Mineral oil
Part C - Lead in Gasoline StandardsD-5059-C-CAL-SET $ 450 / set of 7 x 4 oz
The Set contains the following 7 solutions in isooctane
Part A - Lead in Gasoline StandardsD-5059-A-CAL-SET $ 450 / set of 7 x 4 oz
The Set contains the following 7 solutions in isooctane
D-5059
Meets
EPA Guidelines
for RFG
Analysis
Qualitative Reference Petroleum SetD-5134-92-SET $ 75 / 3 x 1 mL
Cat. No. Description Unit Price
D-5134-92-ALK Qualitative Reference Alkylate Standard neat fraction 1 x 1 mL $ 30approx. 30 components identified
D-5134-92-NAP Qualitative Reference Naphtha Standard neat fraction 1 x 1 mL 30approx. 70 components identified
D-5134-92-REF Qualitative Reference Reformate Standard neat fraction 1 x 1 mL 30approx. 100 components identified
Originally designed forD-5059-98
Originally designed forD-5134-98
ASTM D-5186 Aromatic Content & Polynuclear Aromatic Content ofDiesel Fuels & Aviation Turbine Fuels by SFC
ASTM D-5185 Additive Elements, Wear Metals, & Contaminants in Used Lubricating Oils by ICP-AES
ASTM D-5184 Aluminum and Silicon in Fuel Oils by (Reapproved 1995) Ashing, Fusion, ICP-AES Spectrometry & AA Spectrometry
28 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
ISO 9001:2000Certificate Number: 31692
Method 51845185
, 5186
See Table of Contents for theWear Metals Group pages
Standards of Interests
This calibration curve has beenformulated with startingmaterials containing no metalsulfonates. So a sulfurcalibration curve can easily bedeveloped using a highconcentration sulfur standard.
Technical Notes
Recommended Internal Standard (IS)
ASTM Standards
Wt. / Wt. %Tetralin 3.0Toluene 20
Wt. / Wt. %n-Hexadecane 75Naphthalene 2.0
Detector Linearity Check Solution SetD-5186-96-DLC-SET $ 30 / 2 x 1 mL
Set includes the below two Cat. No.'s
D-5186-96-DLC-25X 25% w/w #2 Diesel Fuel in n-HexadecaneD-5186-96-DLC-50X 50% w/w #2 Diesel Fuel in n-Hexadecane
Performance SolutionD-5186-96-PM $ 25 / 1 x 1 mLD-5186-96-PM-PAK SAVE 20% $ 100 / 5 x 1 mL
4 comps.
Each Wear Metal Standard containsthe below list of 21 elements inhydrocarbon oil at the statedconcentration
Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)
Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)
Contact the our Technical department for Ready-to-Aspirate working level calibration curves designed foryour laboratories' specific calibration ranges.
Technical Note
Aluminum Standard SolutionD-5184-91-AL-1 $ 34 / 1 x 100 mLD-5184-91-AL-5 $ 67 / 1 x 500 mL
Al @ 1000 µg/mL in 5 % HCl
Silicon Standard SolutionD-5184-91-SI-1 $ 34 / 1 x 100 mLD-5184-91-SI-5 $ 67 / 1 x 500 mL
Silicon @ 1000 µg/mL in trace NaOH
21 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates
Tartaric Acid / Hydrochloric AcidSolutionD-5184-91-TA-5 $ 20 / 1 x 500 mL
Tartaric acid @ 0.5% w/v in 4% HCl
Member
Conc. Cat. No. Price(µg/g)
10 WM-21-NMS-1X-1 $ 16030 WM-21-NMS-3X-1 16050 WM-21-NMS-5X-1 160100 WM-21-NMS-10X-1 180300 WM-21-NMS-30X-1 240500 WM-21-NMS-50X-1 350
WM-21-NMS-SET-1 $ 1050set of above 6 x 100 mL
Sulfur free Organometallic (IS) Sulfur free Organometallic (IS) Element @ 1000 µg/g Price @ 5000 µg/g Price
Cat. No. 50 mL Cat. No. 50 mL
Cobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110
Originally designed forD-5184-91
Originally designed forD-5185-97
Originally designed forD-5186-99
WEA
R M
ETAL
S
ASTM D-5307-97 Boiling Range Distribution of Crude Petroleum by GC
ASTM D-5191 & D-5482 Vapor Pressure Standards
ASTM D-5188 Vapor - Liquid Ratio Temperature Standards
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 29
Member
ASTMMethod 5188
5191 &54825307
ASTM Standards
Consists of puresolvents withknown vaporpressure
Technical Note
Wt./Wt. %n-Octane 98.0
Wt./Wt. %n-Heptane 15n-Octane 15n-Nonane 15
Wt./Wt. %Propane 10 Butane 15n-Pentane 15n-Hexane 15
Wt./Wt. %n-Hexadecane 1.0n-Octadecane 1.0
Wt./Wt. %n-Hexadecane 25n-Heptadecane 25
Wt./Wt. %n-Tetradecane 25n-Pentadecane 25
n-Octadecanen-Eicosanen-Tetracosanen-Octacosanen-Dotriacontanen-Hexatriacontanen-Tetracontanen-Tetratetracontane
n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecanen-Hexadecanen-Heptadecane
Qualitative Paraffins StandardD-5307-QUAL $ 40 / 1 x 1 mLD-5307-QUAL-PAK SAVE 20% $ 160 / 5 x 1 mLAt stated approx. Wt. % 7 comps.
Column Resolution MixtureD-5307-CR $ 15 / 1 x 1 mLD-5307-CR-PAK SAVE 20% $ 60 / 5 x 1 mLAt stated approx. Wt. % 3 comps.
Internal StandardD-5307-IS-10ML $ 30 / 1 x 10 mLD-5307-IS-10ML-PAK SAVE 20% $ 120 / 5 x 10 mL
4 comps.
Quantitative Paraffins StandardD-5307-QUANT $ 60 / 1 x 2 mLD-5307-QUANT-PAK SAVE 20% $ 240 / 5 x 2 mLEqual Wt. % 16 comps.
Performance Check Samples for daily monitoring of instrument performance
Vapor Pressure Quality Control Samples
Cat. No. V/L Temp Price / Set
ASTM-P-125-01-VAP 36.1˚C (96.9˚F) $ 45 / 5 x 20 mLASTM-P-125-02-VAP 68.0˚C (155.7˚F) 45 / 5 x 20 mL
Cat. No. Vapor Pressure Price / Set
ASTM-P-124-01-VAP 68.3kPa (9.91 psi) $ 65 / 10 x 10 mLASTM-P-124-02-VAP 68.0kPa (9.86 psi) 75 / 10 x 10 mLASTM-P-124-03-VAP 51.1kPa (7.41 psi) 70 / 10 x 10 mLASTM-P-124-04-VAP 46.7kPa (6.77 psi) 115 / 10 x 10 mLASTM-P-124-05-VAP 22.5kPa (3.26 psi) 50 / 10 x 10 mLASTM-P-124-06-VAP 7.1kPa (1.03 psi) 50 / 10 x 10 mL
Value Added Paks (Cat. No.’sending in -VAP) provide multiplesingle units packaged togetherfor both greater stability andcost savings.
Originally designed forD-5188-99
Originally designed forD-5191-99 & D-5482-99
Member
AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.
ASTM D-5441 Analysis of Methyl tert-butyl ether (MtBE) by GC
30 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM
Method 5441
For our complete line ofOrganic Standards andInorganic Standards, requesta copy of the Catalog(s).
ASTM Standards
cis-Pentenetrans-2-Pentenetert-Butanol
tert-Amyl methyl ethertert-Butanoltert-Butyl ethyl ether4,4-Dimethyl-2-neopentyl-1-penteneMethanol2-Methylbutane2-Methyl-2-butene2,2',4,6,6'-Pentamethyl-3-heptenePentanecis-2-Pentenetrans-2-Pentene2,4,4-Trimethyl-1-pentene
2-MethylpentaneMethyl ethyl ketone3-Methylpentanesec-Butyl methyl etherEthyl tert-butyl etherTAME3,5-Dimethyl-1-hexene2,4,4-Trimethyl-1-pentene2,4,4-Trimethyl-2-pentene3,4,4-Trimethyl-trans-2-pentene2,3,4-Trimethyl-2-pentene4,4-Dimethyl-2-neopentyl-1-pentene2,2’,4,6,6’-Pentamethyl-3-heptene
Methanol3-Methyl-1-buteneAcetoneIsopentane2-Propanol1-Pentene2-Methyl-1-butenen-Pentanetrans-2-Pentenet-Butanolcis-2-Pentene2-Methyl-2-buteneCyclopenteneMtBE2,3-Dimethyl-1-butene4-Methyl-cis-2-pentene
MtBE2,3-Dimethyl-1-butene4-Methyl-cis-2-pentene2-MethylpentaneMethylethyl ketone3-Methylpentanesec-Butyl methyl etherETBETAME3,5-Dimethyl-1-hexene2,4,4-Trimethyl-1-pentene2,4,4-Trimethyl-2-pentene3,4,4-Trimethyl-trans-2-pentene2,3,4-Trimethyl-2-pentene4,4-Dimethyl-2-neopentyl-1-pentene2,2’,4,6,6’-Pentamethyl-3-heptene
MethanolIsobutylenen-Butanetrans-2-butenecis-2-butene3-Methyl-1-buteneAcetoneIsopentane2-Propanol1-Pentene2-Methyl-1-butenen-Pentanetrans-2-Pentenet-Butanolcis-2-Pentene2-Methyl-2-buteneCyclopentene
tert-Amyl methyl ethertert-Butanoltert-Butyl ethyl ether4,4-Dimethyl-2-neopentyl-1-penteneMethanol2-Methylbutane2-Methyl-2-butene2,2',4,6,6'-Pentamethyl-3-heptenePentanecis-2-Pentenetrans-2-Pentene2,4,4-Trimethyl-1-pentene
MtBE Resolution Test MixtureD-5441-RES $ 20 / 1 x 1 mLD-5441-RES-PAK SAVE 20% $ 80 / 5 x 1 mL
D-5441-RES-5ML $ 60 / 1 x 5 mLD-5441-RES-5ML-PAK SAVE 20% $ 240 / 5 x 5 mLEach comp. at 1% Wt./Wt. in MtBE 3 comps.
MtBE Contaminant Standard High ConcentrationD-5441-10X $ 30 / 1 x 1 mLD-5441-10X-PAK SAVE 20% $ 120 / 5 x 1 mL
D-5441-10X-5ML $ 100 / 1 x 5 mLD-5441-10X-5ML-PAK SAVE 20% $ 400 / 5 x 5 mLEach comp.at 1% Wt./Wt. in MtBE 12 comps.
MtBE Contaminant Standard Low ConcentrationD-5441 $ 30 / 1 x 1 mLD-5441-PAK SAVE 20% $ 120 / 5 x 1 mL
D-5441-5ML $ 100 / 1 x 5 mLD-5441-5ML-PAK SAVE 20% $ 400 / 5 x 5 mLEach comp. at 0.1% Wt./Wt. in MtBE 12 comps.
The ASTM Committee D-02 on Petroleum Products and Lubricants has issued the Standard Method D-5441-98 for the determination of the purity of methyl tert-butyl ether (MtBE) by Gas Chromatography.This method provides a procedure to measure impurities in MtBE such as C4 to C12 olefins, methyl,isopropyl and tert-butyl alcohols, methyl sec-butyl & methyl tert-amyl ethers, acetone, and methyl ethylketones. The presence of these impurities in MtBE can have a direct effect upon the value of the MtBE asa gasoline additive. AccuStandard has formulated the following reference standards to meet the methodspecifications. Different packaging sizes are available to meet various sample testing capacities .
Qualitative StandardD-5441-QUAL $ 145 / 1 x 1 mL0.1% Wt./Wt. in n-Dodecane 33 comps.
Quantitative StandardD-5441-QUANT $ 130 / 1 x 1 mL0.1% Wt./Wt. in n-Dodecane 29 comps.
Member
Originally designed forD-5441-98
ASTM D-5453 Total Sulfur in Light Hydrocarbons,Motor Fuels and Oils by Ultraviolet Fluorescence
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 31
Member
ASTM
31
Due to the wide variety ofrecommended solvents andstarting materials mentioned inthe preparation of the sulfurstandards, please review thecurrent product offering listedfor certified sulfur standards.Should AccuStandard’s currentsulfur standard line be missingthe necessary standards foryour application, please use ourcustom quotation request formto indicate your requiredformulation. For ppb Sulfurmeasurements, see page 6-11.
Technical Note
See pages 6-11 for acomprehensive line of CertifiedSulfur Calibration Standards,Petrocheck, & Petrotest qualitycontrol products, pages 1-2.
Standards of Interests
ASTM Standards
D-5453
Meets
EPA Guidelines
for RFG
Analysis
Method 544254435453
ASTM D-5443 Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in (Reapproved 1998) Petroleum Distillates through 200°C by Multi-dimensional GC
Hydrocarbon Test MixtureD-5443-93-HTM $ 100 / 1 x 1 mLAt stated Wt. % 28 comps.
See ASTM Methods D-3710, D-5307, D-6352 for additionalcalibration standards forhydrocarbon analysis or page 15for new proposed methods.
Standards of InterestsASTM D-5442 (Reapproved 1998) Analysis of Petroleum Waxes by GC
Retention Time Standard Mix 1D-5442-RT1 $ 50 / 500 mgEqual parts by weight 12 comps.
Retention Time Standard Mix 2D-5442-RT2 $ 55 / 500 mgEqual parts by weight 16 comps.
n-Hexadecane (c16)n-Octadecane (c18)n-Eicosane (c20)n-Docosane(c22)n-Tetracosane (c24)n-Hexacosane (c26)
Column ResolutionStandardD-5442-CR-PAK $ 40 / 5 x 1 mLAt stated Wt. % in Cyclohexane
2 comps.
Wt./Wt. %n-Eicosane 0.05n-Tetracontane 0.05
n-Octacosane (c28)n-Triacontane (c30)n-Dotriacontane (c32)n-Hexatriacontane (c36)n-Tetracontane (c40)n-Tetratetracontane (c44)
Quantitative Wax StandardD-5442-PAK $ 95 / 5 x 1 mLAt stated Wt. % in Cyclohexane 16 comps.
n-Dodecane (c12)n-Tetradecane (c14)n-Hexadecane (c16)n-Octadecane (c18)n-Eicosane (c20)n-Docosane (c22)n-Tetracosane (c24)n-Hexacosane (c26)
n-Octacosane (c28)n-Triacontane (c30)n-Dotriacontane (c32)n-Hexatriacontane (c36)n-Tetracontane (c40)n-Tetratetracontane (c44)n-Pentacontane (c50)n-Hexacontane (c60)
NEW NEW
Wt./Wt. %Cyclopentane 1.00n-Pentane 1.00Cyclohexane 2.002,3-Dimethylbutane 2.00n-Hexane 2.00n-Hexene 1.50Methylcyclohexane 4.254-Methyl-1-hexene 1.50n-Heptane 3.50
Wt./Wt. %1cis,2-Dimethylcyclohexane 5.00Isooctane 5.00n-Octane 5.001cis,2 cis,4-Trimethylcyclohexane 4.25n-Nonane 4.50n-Decane 4.25n-Undecane 3.50n-Dodecane 3.25Benzene 2.25Toluene 2.25
Wt./Wt. %trans-Decahydronaphthelene 4.25n-Tetradecane 4.50Ethylbenzene 4.50o-Xylene 4.25n-Propylbenzene 5.001,2,4-Trimethylbenzene 4.501,2,3-Trimethylbenzene 5.001,2,4,5-Tetramethylbenzene 5.00Pentamethylbenzene 5.00
Wt./Wt. %n-Tetracosane 0.10n-Hexacosane 0.12n-Octacosane 0.12n-Triacontane 0.10n-Dotriacontane 0.08
Wt./Wt. %n-Dodecane 0.02n-Tetradecane 0.03n-Hexadecane 0.04n-Octadecane 0.05n-Eicosane 0.06n-Docosane 0.08
Wt./Wt. %n-Hexatriacontane 0.06n-Tetracontane 0.05n-Tetratetracontane 0.04n-Pentacontane 0.03n-Hexacontane 0.02
High Level Sulfur SetD-5453-HL-SET $ 90 / 5 x 2 mLThe set contains the following 5 standards in Isooctane
Mid Level Sulfur SetD-5453-ML-SET $ 90 / 6 x 2 mLThe set contains the following 5 standards in Isooctane
Low Level Sulfur SetD-5453-LL-SET $ 90 / 5 x 2 mLThe set contains the following 5 standards in Isooctane Real World Sulfur in Various
Gasoline & FuelsQC SamplesSBPT-LSGAS $ 25 / 2 x 15 mLParameter Method Approx .Range
Sulfur D-5453-00 0 - 50 µg/g
Cat. No. Description Unit
D-5453-HL-BL Sulfur Blank 2 mLD-5453-HL-01 Sulfur @ 100 ng/µL 2 mLD-5453-HL-02 Sulfur @ 250 ng/µL 2 mLD-5453-HL-03 Sulfur @ 500 ng/µL 2 mLD-5453-HL-04 Sulfur @ 1000 ng/µL 2 mL
Cat. No. Description Unit
D-5453-ML-BL Sulfur Blank 2 mLD-5453-ML-01 Sulfur @ 5.0 ng/µL 2 mLD-5453-ML-02 Sulfur @ 25 ng/µL 2 mLD-5453-ML-03 Sulfur @ 50 ng/µL 2 mLD-5453-ML-04 Sulfur @ 100 ng/µL 2 mLD-5453-ML-05 Sulfur @ 200 ng/µL 2 mL
Cat. No. Description Unit
D-5453-LL-BL Sulfur Blank 2 mLD-5453-LL-01 Sulfur @ 0.5 ng/µL 2 mLD-5453-LL-02 Sulfur @ 2.5 ng/µL 2 mLD-5453-LL-03 Sulfur @ 5.0 ng/µL 2 mLD-5453-LL-04 Sulfur @ 10.0 ng/µL 2 mL
Originally designed forD-5442-93
Originally designed forD-5443-93
Originally designed forD-5453-00
ASTM D-5501 Ethanol Content of Denatured Fuel Ethanol by GC
32 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
Additional Oxygenate calibration,check standards, andindependent reference standardscan be found in ASTM methodD-4815 (page 24) or D-5622-94(page 37). The required QA/QCprocedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards tomeet this increased usage.
Technical Note
Technical NoteVapor Pressure Quality Control Samples
ASTM D-5482 & D-5191 Vapor Pressure Standards
ASTM D-5580-00 Continued on the Next Page
ASTM Standards
ASTM D-5580 Benzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C9 and Heavier Aromatics, & Total Aromatics in Finished Gasoline by GC
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 0.09 - 4.50 0.09 0.45 0.90 1.80 4.50Toluene 0.90 - 13.50 13.50 9.00 4.50 2.25 0.90Ethylbenzene 0.45 - 9.00 0.45 0.90 2.25 4.50 9.00o-Xylene 0.45 - 9.00 0.90 2.25 9.00 4.50 0.451,2,4-Trimethylbenzene 0.45 - 9.00 0.90 9.00 0.45 4.50 2.252-Hexanone (Internal Std.) 10.00 10.00 10.00 10.00 10.00Isooctane 74.16 68.40 72.90 72.45 72.90
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Analyte Calibration range Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 0.10 - 5.00 0.10 0.50 1.00 2.00 5.00Toluene 1.00 - 15.00 15.00 10.00 5.00 2.50 1.00Ethylbenzene 0.50 - 10.00 0.50 1.00 2.50 5.00 10.00o-Xylene 0.50 - 10.00 1.00 2.50 10.00 5.00 0.501,2,4-Trimethylbenzene 0.50 - 10.00 1.00 10.00 0.50 5.00 2.50Isooctane 82.40 76.00 81.00 80.50 81.00
Denatured Fuel Ethanol Calibration SetD-5501-94-SET $ 75 / set of 7 x 1 mL
Cat. No. Comp.1 Wt./ Wt.% Comp.2 Wt./ Wt.% Comp.3 Wt./ Wt.% Unit
D-5501-94-01 Ethanol 92 Methanol 0.6 Heptane 7.4 1 x 1 mLD-5501-94-02 Ethanol 93 Methanol 0.5 Heptane 6.5 1 x 1 mLD-5501-94-03 Ethanol 94 Methanol 0.4 Heptane 5.6 1 x 1 mLD-5501-94-04 Ethanol 95 Methanol 0.3 Heptane 4.7 1 x 1 mLD-5501-94-05 Ethanol 96 Methanol 0.2 Heptane 3.8 1 x 1 mLD-5501-94-06 Ethanol 97 Methanol 0.1 Heptane 2.9 1 x 1 mLD-5501-94-07 Ethanol 98 Methanol 0.05 Heptane 1.95 1 x 1 mL
32 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method 5480548255015580
n-Dodecanen-Decanen-Undecane
Alternative n-Paraffin standardsare available on page 15 forfurther method developmentwork or more DetailedHydrocarbon Analysis (DHA).
Standards of Interest
ASTM D-5480 Engine Oil Volatility by GC
n-Octadecanen-Tetracosane
n-Decanen-Dodecanen-Hexadecane
Aromatics Quantitative Calibration Mixes (without Internal Standard)D-5580-95-CAL-SET-10ML $ 300 / set of 5 x 10 mL of 6 component mix
Aromatics Quantitative Calibration Mixes (with Internal Standard)D-5580-95-CAL-IS-SET $ 100 / set of 5 x 1 mL of 7 component mix
Tetracosane (Solution A)D-5480-C40-5ML $ 15 / 1 x 5 mLD-5480-C40-5ML-PAK SAVE 20% $ 60 / 5 x 5 mL500 µg/mL in CS2
n-Tetracosane
Stock Column Resolution StandardD-5480-CR-PAK $ 40 / 5 x 1 mLEach comp. at 10 µg/mL in CS2 5 comps.
D-5480-CR-100X-PAK $ 50 / 5 x 1 mLEach comp. at 1000 µg/mL in CS2 5 comps.
Internal Standard SolutionD-5480-IS-5ML $ 30 / 1 x 5 mLD-5480-IS-5ML-PAK SAVE 20% $ 120 / 5 x 5 mLEach comp. at equal weights 3 comps.
Cat. No. Vapor Pressure Price / Set of 10
ASTM-P-124-01 68.3kPa (9.91 psi) $ 65 / 10 x 10 mLASTM-P-124-02 68.0kPa (9.86 psi) 75 / 10 x 10 mLASTM-P-124-03 51.1kPa (7.41 psi) 70 / 10 x 10 mLASTM-P-124-04 46.7kPa (6.77 psi) 125 / 10 x 10 mLASTM-P-124-05 22.5kPa (3.26 psi) 50 / 10 x 10 mLASTM-P-124-06 7.1kPa (1.03 psi) 50 / 10 x 10 mL
Originally designed forD-5480-95
Originally designed forD-5482-99 & D-5191-99
Originally designed forD-5501-94
Originally designed forD-5580-00
Consists of puresolvents withknown vaporpressure.
ASTM D-5580-00 Benzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C9 &Continued Heavier Aromatics, and Total Aromatics in Finished Gasoline by GC
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 33
Member
ASTM
33
Exclusive Aromatic Chemical Reference MaterialBenefits from AccuStandard
Every analyte in each solution is individually weighed
Actual weights and weight percents are available with allASTM/EPA solutions
ASTM Standards
Valve Timing Calibration Mix(without Internal Standard)M-GRA-VT-AS-10ML $ 100 / 1 x 10 mLM-GRA-VT-AS-10ML-PAK SAVE 20% $ 400 / 5 x 10 mLEach at stated conc. 5 comps.
Wt./Wt. %Benzene 5.0Toluene 5.0Ethylbenzene 10.0o-Xylene 10.0Isooctane 70.0
Internal StandardM-GRA-IS-AS-5ML $ 10 / 1 x 5 mLM-GRA-IS-AS-5ML-PAK SAVE 20% $ 40 / 5 x 5 mL
2-Hexanone (Neat)
Selectivity Check StandardM-GRA-SCS-AS $ 10 / 1 x 1 mLM-GRA-SCS-AS-PAK SAVE 20% $ 40 / 5 x 1 mLEach at stated conc. 2 comps.
Wt./Wt. %n-Dodecane 1.5Isooctane 98.5
Method 5580
ASTM D-5580 GasolineRefinery Quality ControlStandardAccuStandard was requested by the Petrochemical Industry tomanufacture the following QA/QCstandards for ASTM Method D-5580. The configuration of yourinstrument valve time switching andthe pre-column incorporateddetermines which QA/QC standardprovides optimum performancewhen analyzing gasolines samplesby Method D-5580. Use of the D-5580 standards in conjunctionwith the real world gasolineAccuPetroTest & AccuPetroCheckConsensus Value ReferenceMaterial (see pages 1-2) canprovide added assurance that theanalytical results being generatedby the laboratory are reproducibleand the analytical system isperforming to method specifications.
Technical Note
Wt./Wt. %Toluene 9Ethylbenzene 2p-Xylene 3o-Xylene 21,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Naphthalene 1
Wt./Wt. %n-Hexane 12n-Heptane 20n-Octane 15n-Decane 10n-Triadecane 1Isooctane 20Benzene 1
Wt./Wt. %Toluene 9Ethylbenzene 2p-Xylene 3o-Xylene 21,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Naphthalene 1
Wt./Wt. %n-Hexane 12n-Heptane 20n-Octane 15n-Decane 10n-Dodecane 1Isooctane 20Benzene 1
Daily Quality Control Standardwithout Internal StandardD-5580-QC $ 125 / 1 x 10 mLD-5580-QC-PAK $ 500 / 5 x 10 mL
14 comps.
Daily Quality Control Standardwithout Internal StandardD-5580-QC-R1 $ 125 / 1 x 10 mLD-5580-QC-R1-PAK SAVE 20% $ 500 / 5 x 10 mL
14 comps.
Valve Timing Calibration Mix(with Internal Standard)M-GRA-VT/IS-AS $ 25 / 1 x 1 mLM-GRA-VT/IS-AS-PAK SAVE 20% $ 100 / 5 x 1 mLEach at stated conc. 6 comps.
Wt./Wt. %Benzene 4.5Toluene 4.5Ethylbenzene 9.0o-Xylene 9.02-Hexanone (Internal Std.) 10.0Isooctane 63.0
Originally designed forD-5580-00
ASTM Standards
ASTM D-5599 Oxygenates in Gas by GC & O-FID
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Std. 8Calibration range Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. %
Methanol 0.1 - 5.0 --- 0.1 2.5 --- 5 0.5 1 ---Ethanol 1.0 - 12.0 12 --- 3 --- 8 5 1 ---Isopropanol 0.1 - 2.0 2 1 --- 0.1 0.3 --- 0.5 ---t-Butanol 0.1 - 2.0 0.5 0.1 1 --- 2 0.3 --- ---Propanol 0.2 - 2.0 2 --- 0.7 0.2 1 --- 0.4 ---MtBE 1.0 - 17.0 5 17 --- --- 1 2.5 10 ---sec-Butanol 0.1 - 2.5 1 --- 0.5 0.1 --- 2.5 0.7 ---Diisopropyl ether 0.1 - 2.0 --- 0.5 0.3 0.1 2 1 --- ---iso-Butanol 0.1 - 2.0 2 0.5 --- 1 0.1 0.3 --- ---EtBE 1.0 - 18.0 --- 3.5 18 7.5 --- 1 12 ---t-Pentanol 0.1 - 2.0 0.3 1 --- 0.5 0.1 2 --- ---Butanol 0.1 - 2.0 1 --- 0.3 --- 0.5 0.1 2 ---TAME 1.0 - 18.0 --- 3.5 1 18 7.5 12 --- ---
RFA Gasoline 74.2 64.8 64.7 64.5 64.5 64.8 64.4 100
Total oxygenates 25.8 27.2 27.3 27.5 27.5 27.2 27.6 0
Every analyte in each solutionis individually weighed
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 Std. 8Calibration range Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. % Wt. %
Methanol 0.1 - 5.0 --- 0.1 2.5 --- 5 0.5 1 ---Ethanol 1.0 - 12.0 12 --- 3 --- 8 5 1 ---Isopropanol 0.1 - 2.0 2 1 --- 0.1 0.3 --- 0.5 ---t-Butanol 0.1 - 2.0 0.5 0.1 1 --- 2 0.3 --- ---Propanol 0.2 - 2.0 2 --- 0.7 0.2 1 --- 0.4 ---MtBE 1.0 - 17.0 5 17 --- --- 1 2.5 10 ---sec-Butanol 0.1 - 2.5 1 --- 0.5 0.1 --- 2.5 0.7 ---Diisopropyl ether 0.1 - 2.0 --- 0.5 0.3 0.1 2 1 --- ---iso-Butanol 0.1 - 2.0 2 0.5 --- 1 0.1 0.3 --- ---EtBE 1.0 - 18.0 --- 3.5 18 7.5 --- 1 12 ---t-Pentanol 0.1 - 2.0 0.3 1 --- 0.5 0.1 2 --- ---Butanol 0.1 - 2.0 1 --- 0.3 --- 0.5 0.1 2 ---TAME 1.0 - 18.0 --- 3.5 1 18 7.5 12 --- ---
1,2- Dimethoxyethane (ISTD) 4 4 4 4 4 4 4 ---RFA Gasoline 70.2 68.8 68.7 68.5 68.5 68.8 68.4 100
Total oxygenates & ISTD 29.8 31.2 31.3 31.5 31.5 31.2 31.6 0
Oxygenate Calibration CurvesISTD-Free and LargerPackaging Size.AccuStandard has receivedrequests from the PetroleumIndustry to formulate our D-5599Oxygenate product without internalstandard (ISTD) and package it in alarger volume. We have met thoserequests by introducing the M-GRO-CAL-SET calibration curve.This curve is manufactured withoutincorporating an internal standardand is packaged in Ready-to-Use10 mL sample volume.
The certified oxygenate calibrationcurve can be used in combinationwith other aromatic standards forcombined oxygenate/aromaticanalysis, to change the amount ofinternal standard added, or toincorporate alternative internalstandard analytes.
Technical Note
AccuStandard’s M-GROoxygenate calibration curve hasbeen successfully used byPetroleum Refineries andsupporting laboratories for bothASTM Method D-5599 andASTM Method D-4815. Inaddition, AccuStandard’scertified oxygenate chemicalreference materials provide thefollowing features and benefitsfor superior performance andvalue.
Technical Note
ASTM
34 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
Oxygenates Calibration Curve with Internal StandardM-GRO-CAL/IS-SET $ 250 / set of 8 x 1 mLM-GRO-CAL/IS-SET-PAK $ 1,000 / 5 x (8 x 1) mL
of 15 Comp. Mix
D-5599
Meets
EPA Guidelines
for RFG
Analysis
Method 5599
Oxygenates Calibration Curve without Internal StandardM-GRO-CAL-SET $ 850 / set of 8 x 10 mL
of 14 Comp. Mix
Features: Benefits:
Analytes checked for chemical purity & water content The use & validation of the highest purity neats enhance the integrity of the standard.
Analyzed by Independent Laboratories Independent product validation of certified values.
Certified method specific calibration standards Increased confidence in analytical results.
Elimination of standards preparation Time is utilized quantifying samples.
Internal Standards incorporated Ready-to-Inject Standards.
Weights and weight percents provided Ease of use in performing back calculations.
All necessary solutions included Provides single source for sample analysis.
Variations in Packaging size Meet laboratory sample volumes.
Economical Time is spent on analysis rather than preparing stds.
7 stds. used to generate 5 point curve Generate a 5 point curve in 30% less time than competitors' 10 standard set.
Benefits from AccuStandard’s Oxygenates
Originally designed forD-5599-95
Actual weights and weight percents areprovided with all ASTM/EPA Solutions
ASTM D-5599 Oxygenates in Gasoline by GC & O-FIDContinued
Fax 203-786-5287 • AccuStandard • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 35
Additional Oxygenate calibration,check standards, andindependent reference standardscan be found in ASTM methodD-4815 (page 24) or D-5622(page 37). The required QA/QCprocedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards tomeet this increased usage.
Technical Note
The Daily Quality ControlStandard M-GRO-QC-R wasdeveloped in response to yourrequests for a QC mixbracketed by the CalibrationCurve.
AccuStandard reduced thediisopropyl ether content from 3Wt. % to 1 Wt. % to meet themethod specifications.
Technical Note
Compound Target Oxygenate Wt. %
Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1Di-isopropyl ether 1
ASTM Standards
Daily Quality Control Standard(without Internal Standard)M-GRO-QC-10ML $ 100 / 1 x 10 mLM-GRO-QC-10ML-PAK SAVE 20% $ 400 / 5 x 10 mL
Revised Daily Quality Control Standard(without Internal Standard)M-GRO-QC-R-10ML $ 100 / 1 x 10 mLM-GRO-QC-R-10ML-PAK SAVE 20% $ 400 / 5 x 10 mL
Gasoline Refinery Blank(with Internal Standard)M-GRO-BLNK/IS-10ML $ 15 / 1 x 10mLM-GRO-BLNK/IS-10ML-PAK SAVE 20% $ 60 / 5 x 10mL
2 comps.
Wt. %1,2- Dimethoxyethane (ISTD) 4RFA Gasoline 96
Member
ASTM
D-5599
Meets
EPA Guidelines
for RFG
AnalysisASTM/EPA Oxygenate Quality Control Standards
Method 5599
Compound Target Oxygenate Wt. %
iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3
RFA Gasoline 81
14 comps. 100
Compound Target Oxygenate Wt. %
iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3
RFA Gasoline 79
14 comps. 100
Compound Target Oxygenate Wt. %
Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1Di-isopropyl ether 3
Compound Target Oxygenate Wt. %
Di-isopropyl ether 3iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3
RFA Gasoline 79
100
Compound Target Oxygenate Wt. %
Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1
Daily Quality Control Standard(with Internal Standard)M-GRO-QC/IS-5ML $ 75 / 1 x 5 mLM-GRO-QC/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mL
Revised Daily Quality Control Standard(with Internal Standard)M-GRO-QC-R/IS-5ML $ 75 / 1 x 5 mLM-GRO-QC-R/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mL
Compound Target Oxygenate Wt. %
Di-isopropyl ether 1iso-Butanol 1EtBE 3t-Pentanol 1Butanol 1TAME 3
RFA Gasoline 81
100
Compound Target Oxygenate Wt. %
Methanol 1Ethanol 1Isopropanol 1t-Butanol 1Propanol 1MtBE 3sec-Butanol 1
1,2-Dimethoxyethane (ISTD) is combined withthe above 14 comps. in a 4 to 100 weight ratio
15 comps.
O-FID Gasoline Refinery BlankM-GRO-BLNK-10ML $ 10 / 1 x 10mLM-GRO-BLNK-10ML-PAK SAVE 20% $ 40 / 5 x 10mL
RFA Gasoline (neat)
O-FID/EPA Gasoline RefineryInternal StandardM-GRO-IS-5ML $ 10 / 1 x 5 mLM-GRO-IS-5ML-PAK SAVE 20% $ 40 / 5 x 5 mL
1,2- Dimethoxyethane (ISTD)
1,2-Dimethoxyethane (ISTD) is combined withthe above 14 comps. in a 4 to 100 weight ratio
15 comps.
Originally designed forD-5599-95
ASTM D-5599 EPA Gasoline Refinery Oxygenates Calibration Curves
Additional Oxygenate calibration,check standards, and independentreference standards can be found inASTM method D-4815 (page 24) orD-5622 (page 37). The requiredQA/QC procedures in EPA methodsstipulate a calibration checkstandard be used once peranalytical batch or per 10 sampleset. AccuStandard has bulkpackaged check standards to meetthis increased usage.
Technical Note
Wt./Wt. %Methyl tert-butyl ether 11.40RFA gasoline 67.45DME (internal standard) 5.0
Wt./Wt. %Methyl tert-butyl ether 12.0RFA gasoline 71.0
Wt./Wt. %Methanol 3.80Ethanol 7.60tert-Butanol 4.75
Wt./Wt. %Methanol 4.0Ethanol 8.0tert-Butanol 5.0
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Calibr. range Wt. % Wt. % Wt. % Wt. % Wt. %
Methanol 0.29 - 11.40 5.70 11.40 2.85 0.29 8.55Ethanol 0.29 - 11.40 0.29 2.85 5.70 8.55 11.40t-Butanol 0.29 - 11.40 0.29 5.70 8.55 11.40 2.85MtBE 0.29 - 14.29 14.25 7.13 10.69 3.56 0.291,2-Dimethoxyethane (ISTD) 5.00 5.00 5.00 5.00 5.00RFA Gasoline 74.48 67.93 67.31 71.20 71.92
EPA O-FID Quantitative Calibration Mixes (with Internal Standard)M-GRO-CAL-IS/EPA-SET $ 175 / set of 5 x 1 mL
6 comps.
EPA O-FID Quantitative Calibration Mixes (without Internal Standard)M-GRO-CAL-EPA-SET-10ML $ 350 / set of 5 x 10 mL
5 comps.
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5Calibr. range Wt. % Wt. % Wt. % Wt. % Wt. %
Methanol 0.30 - 12.00 6.00 12.00 3.00 0.30 9.00Ethanol 0.30 - 12.00 0.30 3.00 6.00 9.00 12.00t-Butanol 0.30 - 12.00 0.30 6.00 9.00 12.00 3.00MtBE 0.30 - 15.00 15.00 7.50 11.25 3.75 0.30RFA Gasoline 78.40 71.50 70.75 74.95 75.70
EPA O-FID Oxygenate Petrochemical StandardsAccuStandard has formulated this second oxygenate version to meet the specific analyte requirements set forth in the EPA methodology.
Oxygenates Using O-FIDASTM
36 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
For our complete line of Organic Standards,request a copy of ourCatalog.
Method 5599
Internal StandardM-GRO-IS-5ML $ 10 / 1 x 10 mLM-GRO-IS-5ML-PAK SAVE 20% $ 40 / 5 x 10 mL
1,2-Dimethoxyethane (ISTD)
Oxygenate Free Gasoline RefineryBlankM-GRO-BLNK-10ML $ 10 / 1 x 10 mLM-GRO-BLNK-10ML-PAK SAVE 20% $ 40 / 5 x 10 mL
RFA Gasoline (neat)
EPA O-FID Spiking SolutionM-GRO-EPA-SP-5ML $ 50 / 1 x 5 mLM-GRO-EPA-SP-5ML-PAK SAVE 20% $ 200 / 5 x 5 mL
4 comps.
EPA O-FID Quantitative CalibrationCheck Standard(with Internal Standard)M-GRO-EPA-CC/IS-5ML $ 35 / 1 x 5 mLM-GRO-EPA-CC/IS-5MLPAK SAVE 20% $ 150 / 5 x 5 mL
6 comps.
EPA O-FID Quantitative CalibrationCheck Standard(without Internal Standard)M-GRO-EPA-CC-10ML $ 50 / 1 x 10 mLM-GRO-EPA-CC-10ML-PAKSAVE 20% $ 200 / 5 x 10 mL
5 comps.
Wt./Wt. %tert-Butanol 14.3Methyl tert-butyl ether 42.8
Wt./Wt. %Methanol 14.3Ethanol 28.6
Originally designed forD-5599-95
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 37
For our complete line of Inorganic Standards,request a copy of ourInorganics Catalog.
See ASTM Methods D-4815 (page 24) and D-5599(pages 34-36) for additional oxygenate calibrationstandards.
Standards of Interests
ASTM D-5622 Total Oxygen in Gasoline & MeOH Fuels by Reductive Pyrolysis
ASTM Standards
ASTM D-5600 Trace Metals in Petroleum Coke by ICP-AES
Member
ASTMMethod 5600
5622
D-5600 Ready-to-AspirateStandardsAccuStandard has formulated thefollowing stock standards forASTM Method D-5600. We haveprepared numerous Ready-to-Aspirate ICP multi-elementsolutions. Should your companywant to eliminate the preparationprocess for Inorganic standardscontact our Technical Departmentfor a quote on a Ready-to-Aspirate working level Inorganicstandard.
Technical Note
SodiumTitaniumVanadiumZinc
MagnesiumManganeseNickelSilicon
AluminumBariumCalciumIron Lithium Borate Diluent
D-5600-LIB-1 $ 125 / 1 x 100 mLD-5600-LIB-5 $ 180 / 1 x 500 mL
2.0% Lithium Borate in 10% HCl
Hydrochloric Acid DiluentD-5600-BLH-5 $ 50 / 1 x 500 mLD-5600-BLH-L $ 65 / 1 x 1 L
20% HCl in ASTM Type II water
Multi-Element Calibration StandardD-5600-01-1 $ 225 / 1 x 100 mL500 µg/mL each in 2-5% HNO3 tr. HF 12 comps.
Individual ICP Standards are on pages 67-72.
Standards of Interest
AccuStandard’s Oxygenatereference fuel line wasdesigned as a cost effectivealternative for PetrochemicalLaboratories. All oxygenateblends come with a certificateto maintain traceability links toNIST SRMs (when available).By packaging the standard in10 mL sealed ampules yourlaboratory will realize costsavings. The 10 mL sizeavoids having specialpackaging and hazardousmaterial fees billed to yourinvoice.
Technical Note
Oxygenate UnitCat. No. Description (2 x 10 mL, plus an RFA gasoline blank) Wt. % Price
ASTM-P-0061-SET * Ethanol in Oxygenate free RFA gasoline 5.0 3 x 10 mL $ 50ASTM-P-0062-SET * Ethanol in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0063-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0064-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0065-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0066-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0067-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50ASTM-P-0068-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50ASTM-P-0069-SET * Methanol & t-Butanol in Oxygenate free RFA gasoline 10.0 & 5.0 3 x 10 mL 50
Use M-GRO-BLNK-10ML as anoxygenate free RFA gasoline matrix tomake up your own oxygenate standardsor call our Technical Dept. to have aStandard custom made for you.
Technical Note* Each Set includes M-GRO-BLNK-10ML
Oxygenate Free Gasoline Refinery BlankM-GRO-BLNK-10ML $ 10 / 1 x 10 mL
RFA Gasoline (neat)
Originally designed forD-5622-95
Originally designed forD-5600-98
ASTM D-5623 Sulfur Compounds in Light Petroleum Liquids by GC andSulfur Selective Detection
38 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
Custom Ampulling for Bulk Quantity Requirements
• Fill Volumes from 0.2 mL to 20 mL
• Flammables
• QC Services available
AccuStandard has the resources and equipment to meet yourcustom packaging requirements. Our full automated filler-sealercan accommodate a fill range from 0.2 to 20 mL, and ampulesizes from 1 mL to 20 mL.
AccuStandard has extensive experience with Round Robinsamples for ASTM committees.
Call our Technical Department for a quotation.
We can reduce your costs by using the Cozzoli Auto Filling/Sealing Machine topackage just the right size product for your application.
ASTM Standards
ASTM-P-0091-10X-SET $ 625 / set of 22 x 1 mLApprox. 2.0 mg/mL each in Toluene
Analyte Cat. No. Unit Price
Hydrogen sulfide ASTM-P-0091-01-10X 1 x 1 mL $ 35Carbonyl sulfide (Carbon oxysulfide) ASTM-P-0091-02-10X 1 x 1 mL 35Methyl mercaptan (Methanethiol) ASTM-P-0091-03-10X 1 x 1 mL 35Ethyl mercaptan (Ethanethiol) ASTM-P-0091-04-10X 1 x 1 mL 35Methyl sulfide (Dimethyl sulfide) ASTM-P-0091-05-10X 1 x 1 mL 35Carbon disulfide ASTM-P-0091-06-10X 1 x 1 mL 352-Propanethiol (Isopropyl mercaptan ASTM-P-0091-07-10X 1 x 1 mL 352-Methyl-2-propanethiol (t-butyl mercaptan) ASTM-P-0091-08-10X 1 x 1 mL 351-Propanethiol (Propyl mercaptan) ASTM-P-0091-09-10X 1 x 1 mL 35Ethyl methyl sulfide ASTM-P-0091-10-10X 1 x 1 mL 351-Methyl-1-propanethiol (2-butanethiol) ASTM-P-0091-11-10X 1 x 1 mL 35Thiophene ASTM-P-0091-12-10X 1 x 1 mL 352-Methyl-1-propanethiol (Isobutyl mercaptan) ASTM-P-0091-13-10X 1 x 1 mL 35Diethyl sulfide ASTM-P-0091-14-10X 1 x 1 mL 351-Butanethiol (Butyl mercaptan) ASTM-P-0091-15-10X 1 x 1 mL 35Methyl disulfide (Dimethyl disulfide) ASTM-P-0091-16-10X 1 x 1 mL 352-Methylthiophene ASTM-P-0091-17-10X 1 x 1 mL 353-Methylthiophene ASTM-P-0091-18-10X 1 x 1 mL 35Diethyl disulfide (Ethyl disulfide) ASTM-P-0091-19-10X 1 x 1 mL 353-Methylbenzo[b]thiophene ASTM-P-0091-20-10X 1 x 1 mL 355-Methylbenzo[b]thiophene ASTM-P-0091-21-10X 1 x 1 mL 75Diphenyl sulfide ASTM-P-0091-22-10X 1 x 1 mL 35
This set of qualitative Sulfur Standards are formulated for research evaluation of the presence of the sulfuranalytes or their breakdown products.
Method 5623
Originally designed forD-5623-94
ASTM D-5708 Nickel, Vanadium, & Iron in Crude Oils & Residual Fuels by ICP-AES
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 39
Member
ASTM
See Table of Contents forthe Wear Metals Grouppages.
Standards of Interests
ASTM Standards
Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET $ 2100 / 100 mL
Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 - 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 - 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200
Sulfur and Metals in Mineral OilASTM-P-0102-SET $ 1850 / 100 mL
Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 - 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 - 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200
VanadiumIronNickelVanadiumIron
Nickel
IronNickelVanadium
Working Level Multi-ElementAqueous StandardD-5708-B-5 $ 105 / 500 mLEach at 10 µg/mL in 2-5% HNO3 3 comps.
Test Method B - ICP after Acid Decomposition of Sample
Stock Multi-Element inMineral OilD-5708-A-10X $ 150 / 4 oz.100 µg/g in 20 cSt mineral oil
3 comps.
Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L $ 45 / L (2 x 500 mL)
5% HNO3 in ASTM Type I Water
Stock Multi-Element Aqueous StandardD-5708-B-10X-1 $ 60 / 100 mLD-5708-B-10X-5 $ 115 / 500 mLEach at 100 µg/mL in 2-5% HNO3 3 comps.
Test Method A - ICP with an Organic Solvent Specimen Solution
Method 5599
For our complete line of Inorganic Standards,request a copy of ourInorganics Catalog
Originally designed forD-5708-95a
Member
AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.
WEAR M
ETALS
ASTM D-5762 Nitrogen in Petroleum & Petroleum Products by Boat-Inlet Chemiluminescence
QC Standards
40 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
AccuPetroCheck QC StandardsTwo of the fuels are available as AccuPetroCheckConsensus Value QC Standards. TheAccuPetroCheck CARB and Conventionalgasoline reference materials have all parameterslisted on the certificate with the Consensus Valuesand the regression equations for reproducability.Use of these Reference Materials improve thequality of laboratory results. The ConsensusValues listed reflect initial statistical treatment ofthe data at the time the catalog was published.The actual certificate provided with theAccuPetroCheck QC standard will have theaccepted Consensus Value based on statisticaltreatment of the data.
Conventional Gasoline QCStandardASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mL
Parameter Method Value Conc.Total Aromatics D-1319 34.6 Vol.%Total Olefins D-1319 12.4 Vol.%Total Saturates D-1319 62.8 Vol.%Sulfur D-2622 0.0338 Wt.%Sulfur D-4294 0.0368 Wt.%Sulfur D-5453 317.36 µg/gSulfur D-6344 338.78 µg/gBenzene D-5769 0.55 Vol.%Toluene D-5769 5.53 Vol.%Total Aromatics D-5769 32.51 Vol.%Benzene D-6227 0.52 Vol.%Total Olefins D-6550 12.4 Vol.%
CARB Low Sulfur RFG QCStandardASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mL
Parameter Method Value Conc.Total Aromatics D-1319 24.5 Vol.%Total Olefins D-1319 5.3 Vol.%Total Saturates D-1319 58.3 Vol.%Sulfur D-2622 0.0057 Wt.%Sulfur D-4294 0.0078 Wt.%Sulfur D-5453 55.76 µg/gSulfur D-6344 59.31 µg/gBenzene D-5769 0.80 Vol.%Toluene D-5769 4.92 Vol.%Total Aromatics D-5769 23.42 Vol.%Benzene D-6227 0.78 Vol.%Total Olefins D-6550 5.3 Vol.%
AccuPetroCheck and AccuPetroTest Real World Gasoline QC StandardsIn cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampulled 21 Real World gasoline reference fuels. Consensus Values havebeen determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of wellcharacterized gasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTMD-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’sAccuPetroTest & AccuPetroCheck standards are being successfully used to achieve these new Quality Control requirements.
ASTM Standards
Technical Note
Technical Note
Technical NoteLow level Nitrogen & Sulfur Calibration SetASTM-P-0071-SET $ 50 / 4 x 1 mLCat. No. Description UnitASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mL
Low level Nitrogen Calibration SetASTM-P-0070-SET $ 75 / 6 x 1 mL
Cat. No. Description UnitASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mL
Nitrogen Calibration SetD-5762-95-CAL-SET $ 75 / 6 x 1 mL
Cat. No. Description UnitD-5762-95-BL Xylene Blank 1 x 1 mLD-5762-95-1X Nitrogen @ 1.0 µg/mL in Xylene 1 x 1 mLD-5762-95-5X Nitrogen @ 5.0 µg/mL in Xylene 1 x 1 mLD-5762-95-10X Nitrogen @ 10 µg/mL in Xylene 1 x 1 mLD-5762-95-50X Nitrogen @ 50 µg/mL in Xylene 1 x 1 mLD-5762-95-100X Nitrogen @ 100 µg/mL in Xylene 1 x 1 mL
Stock Nitrogen StandardD-5762-95-500X-PAK $ 45 / 5 x 1 mL
Nitrogen @ 500 µg/mL in Xylene (Acridine @ 6397 µg/mL)
Method 5762
Originally designed forD-5762-98
Nitrogen introduced usingAcridine.
Nitrogen introduced usingAcridine.
The Nitrogen isintroduced usingAniline and the Sulfuris introduced using n-Butyl sulfide.
AccuPetroTest Gasoline
AccuPetroTest Gasoline QC
AccuPetroTest Gasoline
AccuPetroTest
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 41
Member
ASTM
Our new comprehensive single blindgasoline QC sample tests for moreparameters from a single sample.The actual gasoline sample willhave consensus values listed on thedatasheet that fall within the rangelisted for each parameter.
Technical Note
Comprehensive Single Blind Gasoline QCSampleSBPT-COMP $ 50 / 2 x 15 mL
Parameter Method Approx. Range Conc.Total Aromatics D-1319 8 - 60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30 - 80 Vol.%Sulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 0.5 -500 µg/gSulfur D-6344 1.0 - 1000 µg/gBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%Total Aromatics D-5769 8 - 60 Vol.%Benzene D-6277 0.1 - 2.0 Vol.%Total Olefins D-6550 1 - 40 Vol.%
Conducting a Petrochemical Round Robin for a new ASTM method?Select AccuStandard to prepare the necessary samples for the Round Robinstudy.
Sulfur QC SampleSBPT-SGAS $ 25 / 2 x 15 mL
Parameter Method Approx. RangeSulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 4.0 - 500 µg/gSulfur D-XXXX 1.0 - 1000 µg/g
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for Sulfur Calibration Standards
Olefins QC SampleSBPT-OLEFIN $ 25 / 2 x 15 mL
Parameter Method Approx. RangeTotal Aromatics D-1319 8-60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30-80 Vol. %
See ASTM Method D-1319 for Sulfur CalibrationStandards
AccuPetroTest Single BlindStandardsPetrochemical Laboratories looking totest the performance of the laboratory fora specific parameter can order the SingleBlind AccuPetroTest sample for theparameter of interest. Two real worldgasoline samples will be sent for the testparameter requested and a separate sealedenvelope containing the determinedConsensus Value is also provided. Thesecond sample is for repeatability testingor as a future QA/QC reference.
Aromatics QC SampleSBPT-AROM $ 25 / 2 x 15 mL
Parameter Method Approx. RangeTotal Aromatics D-5769 8 - 60 Vol.%
See ASTM Methods D-3606, D-5580-95, D-5769-95for Benzene Calibration Standards
Benzene/Toluene QC SampleSBPT-BENZ $ 25 / 2 x 15 mL
Parameter Method Approx. RangeBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%
See ASTM Methods D-3606, D-5580-95, D-5769-95for Benzene Calibration Standards
Low Sulfur QC SampleSBPT-LSGAS $ 25 / 2 x 15 mL
Parameter Method Approx. RangeSulfur 5453 0 - 50 µg/g
Sulfur Single Blind AccuPetroTestAlternative Matrices StandardsAccuStandard has manufactured a number ofDiesel and White Mineral Oil quality controlproducts containing a gravimetrically preparedamount of Sulfur. Use of these alternativematrix materials can provide further evaluationof the QA/QC process in the laboratory. Twosamples will be sent for the test parameter anda separate sealed envelope containing thegravimetrically prepared sulfur values is alsoprovided. The second sample is forrepeatability testing or for use as a futureQA/QC reference.
Sulfur in White Mineral Oil QCStandardSBPT-SWMO $ 25 / 2 x 15 mL
Parameter Approx. RangeSulfur 20 - 11000 mg/kg
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for SulfurCalibration Standards
Sulfur in Diesel Fuel QC StandardSBPT-SDF $ 25 / 2 x 15 mL
Parameter Approx. RangeSulfur 20 - 11000 mg/kg
See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453, for Sulfur Calibration Standards
Petrochemical Standards
Olefin QC SampleSBPT-OLEFINSFC $ 25 / 2 x 15 mL
Parameter Method Approx. RangeOlefins 6550 1 - 40 Vol.%
Test toLow ppb
SulfurSee Pages 6-11
ASTM D-5769 Benzene, Toluene & Total Aromatics in Finished Gasoline by GC/MS
42 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Method D-5769-98Benzene, Toluene, and Total Aromatics in Finished Gasoline by GC/MS
Features: Benefits:Purity and Identity of all analytes verified .......... Impurity interferences in analyte retention time under identical operating conditions window are compensated.
Certified method specific calibration standards . Increased confidence in analytical results.
Eliminates preparation of calibration standards ..Time is utilized quantifying actual samples.
Internal Standards Incorporated .........................Saves time.
Weights and weight percents provided ..............Ease of use in performing back calculations.
Includes all necessary solutions .........................Complete single source for reference materials.
Variations in packaging size .............................. Meet laboratory sample volumes and demands.
Low Cost ............................................................ More economical to purchase than to prepare standards.
Flexibility ............................................................ Meet your lab requirements/method changes.
Only 5 standards needed for a 5 Point Curve ... Generate a full calibration curve in 1/2 the time of the two set version composed of 10 standards.
No charge disk deliverable calibration curve .... Direct computer uploading eliminates the input of 135 weights (CALAMTS™) separate data points.
Aromatic Product Line yields the following important benefits
ASTM Standards
All of your standards requirements for ASTM Method D-5769 have been put together in thefollowing 10 pages. These standards and methods are used in the monitoring of TotalAromatics according to the latest methods and amendments to the US Clean Air Act.
A set of Amendments, containing more stringent specifications became effective January 1,1995 limiting the volatility and composition of reformulated gasoline.
The D-02 Committee of the American Society of Testing Materials, developed a standard testmethod D-5769 for the determination of the analyte composition by GC/MS of reformulatedgasoline.
Method 5769
Originally designed forD-5769-98
ASTM D-5769 Benzene, Toluene & Total Aromatics in Finished Gasoline by GC/MS
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 43
Member
ASTMASTM Standards
Standards Designed for ASTM D-5769 as published in the 1997 Annual Book of ASTM Standards,Vol. 05.03 Petroleum Products and Lubricants (III): D-4636-latest; CatalystsThe following M-GRA catalog numbers contain the necessary calibration curves, daily quality control, andinternal standards designed to meet the promulgated GC/MS Aromatic method listed in the 1997 ASTMBook of Standards.
AccuStandard offers two different versions of the M-GRA catalog numbers: M-GRA three componentinternal standard version, and the M-GRA four component internal standard version.
The three component internal standard version contains the necessary deuterated analytes for fullqualitative and quantitative analysis of the 25 components listed in the published version.
The four component internal standard version was designed at the request of the petroleum refinerylaboratories. This four internal standard version incorporates not only the Benzene-d6, Ethyl benzene-d10,Naphthalene-d8, but also Toluene-d8. Incorporating the Toluene-d8 as the internal standard for thequantification of gasolines with higher Toluene levels has improved analytical results for this analyte.
Incorporation of a 6th Calibration StandardA 6th calibration standard has been formulated for the M-GRA product line to improve the linearity at thehigh end of the calibration curve see page 44. This sixth standard can be especially important in thequantification of gasoline samples containing high toluene levels. The formulation contains an analyteconcentration between the high level standard and the next level, which is standard two. Use of the sixthstandard provides an additional calibration point that is desirable when the calibration curve is developedusing a quadratic fit.
M-GRA-K2 $ 700(Developed for improved high concentration linearity)
Kit includes: Units FunctionM-GRA-CAL/IS-SET 5 x 1 mL 5 Pt. Curve w/ 3 ISTD'sM-GRA-ADD/IS 1 x 1 mL 6th Std. for revison 5 FM-GRA-QC/IS-5ML 1 x 5 mL Daily QC w/ 3 ISTD'sM-GRA-IS-5ML 1 x 5 mL Internal Std. 3 comps. M-GRA-ST 1 x 1 mL Sensitivity Test Solution
See page 44 for product description withanalytes & conc.
For your added convenience we haveprovided the following Aromatics Kitsto meet the analytical requirements forthis method.
Aromatics Kits for analysis by GC/MS
M-GRA-K4 $ 850(Used to meet the Toluene-d8 internal standard versionrecommended by a network of major petroleum refineries)
Kit includes: Units FunctionM-GRA-CAL-R/IS-R-SET5 x 1 mL 5 Pt. Curve w/ 4 ISTD'sM-GRA-ADD/IS-R 1 x 1 mL 6th Standard for rev. 5 FM-GRA-QC-R/IS-R-5ML 1 x 5 mL Daily QC w/ 4 ISTD'sM-GRA-IS-R-10ML 1 x 10 mL Internal Std. 4 comps.M-GRA-ST 1 x 1 mL Sensitivity Test Solution
See page 45 for product description withanalytes & conc.
M-GRA-K1 $ 600(Original Formulations)
Kit includes: Units FunctionM-GRA-CAL/IS-SET 5 x 1 mL 5 Pt. Curve w/ 3 ISTD'sM-GRA-QC/IS-5ML 1 x 5 mL Daily QC w/ 3 ISTD'sM-GRA-IS-5ML 1 x 5 mL Internal Std. 3 comps.M-GRA-ST 1 x 1 mL Sensitivity Test Solution
See page 44 for product description withanalytes & conc.
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
Method 5769
Originally designed forD-5769-95
ASTM D-5769 Calibration Curve with 3 Component Deuterated Internal Standard Added
44 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
Disk Deliverable(At no additional charge)
Eliminates hand keyed-indata.
CALAMTS™(Disk containing “Calibration
Amounts”)
Each analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.
Compound Mix RatioNaphthalene-d8 1 gm
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mL
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 3
13 Comp. Core Mix 100
Includes M-GRA-IS (3 Comp. Internal Standards mix)combined with the above 13 Comp. Core QC Mix: M-GRA-QC in a 5 to 100 weight ratio. 16 comps.
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 3
13 Comp. Core Mix 100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Daily Quality Control Standard(with Internal Standard)M-GRA-QC/IS-5ML $ 100 / 1 x 5 mLM-GRA-QC/IS-5ML-PAK SAVE 20% $ 400 / 5 x 5 mL
Daily Quality Control Standard(without Internal Standard)M-GRA-QC-10ML $ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML $ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL
3 comps.
ASTM/EPA Sensitivity Test SolutionM-GRA-ST $ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane
1,4-Diethyl benzene
Use with any M-GRA Calibration Curve.
Technical Note
Core Calibr. Mix Optional Std. 624 Comps. Target Vol. %
Benzene 2.25Toluene 15Ethylbenzene 3.75m-Xylene 4.50p-Xylene 4.50o-Xylene 4.50Isopropylbenzene 2.25n-Proplylbenzene 2.253-Ethyltoluene 2.254-Ethyltoluene 2.251,3,5-Trimethylbenzene 2.252-Ethyltoluene 2.251,2,4-Trimethylbenzene 3.751,2,3-Trimethylbenzene 2.25Indan 2.251,4-Diethylbenzene 2.25n-Butylbenzene 2.251,2-Diethylbenzene 2.251,2,4,5-Tetramethylbenzene 4.01,2,3,5-Tetramethylbenzene 1.5Naphthalene 1.5Pentamethylbenzene 1.51-Methylnaphthalene 1.52-Methylnaphthalene 1.5Isooctane Bal
Internal Standard (M-GRA-IS)Benzene-d6 2Ethylbenzene-d10 2Naphthalene-d8 1
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Vol. % Vol. % Vol. % Vol. % Vol. %
Benzene 3 1.50 0.75 0.375 0.1875Toluene 19 9.50 4.75 2.375 1.1875Ethylbenzene 5 2.50 1.25 0.625 0.3125m-Xylene 6 3.00 1.50 0.750 0.3750p-Xylene 6 3.00 1.50 0.750 0.3750o-Xylene 6 3.00 1.50 0.750 0.3750Isopropylbenzene 3 1.50 0.75 0.375 0.1875n-Propylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-3-ethylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-4-ethylbenzene 3 1.50 0.75 0.375 0.18751,3,5-Trimethylbenzene 3 1.50 0.75 0.375 0.18751-Methyl-2-ethylbenzene 3 1.50 0.75 0.375 0.18751,2,4-Trimethylbenzene 5 2.50 1.25 0.625 0.31251,2,3-Trimethylbenzene 3 1.50 0.75 0.375 0.1875Indan 3 1.50 0.75 0.375 0.18751,4-Diethylbenzene 3 1.50 0.75 0.375 0.1875n-Butylbenzene 3 1.50 0.75 0.375 0.18751,2-Diethylbenzene 3 1.50 0.75 0.375 0.18751,2,4,5-Tetramethylbenzene 2 1.00 0.50 0.250 0.12501,2,3,5-Tetramethylbenzene 2 1.00 0.50 0.250 0.1250Naphthalene 2 1.00 0.50 0.250 0.1250Pentamethylbenzene 2 1.00 0.50 0.250 0.12501-Methylnaphthalene 2 1.00 0.50 0.250 0.12502-Methylnaphthalene 2 1.00 0.50 0.250 0.1250Isooctane -- Bal Bal Bal Bal
Internal Standard (M-GRA-IS)Benzene-d6 2 2 2 2 2Ethylbenzene-d10 2 2 2 2 2Naphthalene-d8 1 1 1 1 1
Optional Sixth Standardwith 3 Comp. DeuteratedInternal Standard AddedM-GRA-ADD/IS $ 100 / 1 x 1 mL
Aromatics Calibration Standards Kit(3 Internal Standard Version)M-GRA-CAL/IS-SET $ 375 / set of 5 x 1 mL
Method 5769
Originally designed forD-5769-95
ASTM D-5769 Calibration Curve with 4 Component Deuterated Internal Standard Added
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 45
Member
ASTMASTM Standards
For the mandatory real worldQC samples stipulated in theMethod, see pages 1-2
Standards of Interest
Technical Note
This set of calibration solutionswas formulated to improvequantification for Toluene byusing Toluene-d8 as anadditional Internal Standard.
Technical Note
Compound Mix RatioNaphthalene-d8 1 gmToluene-d8 7 mL
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mL
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 3
13 Comp. Core Mix 100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Includes M-GRA-IS-R (4 Comp. Internal StandardsMix) combined with the above 13 Comp. Core QC Mix:M-GRA-QC in a 12 to 100 weight ratio. 17 comps.
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 3
13 Comp. Core Mix 100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Daily Quality Control Standard(with Internal Standard M-GRA-IS-R)M-GRA-QC/IS-R-5ML $ 125 / 1 x 5 mLM-GRA-QC/IS-R-5ML-PAKSAVE 20% $ 500 / 5 x 5mL
ASTM/EPA Sensitivity Test SolutionM-GRA-ST $ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane
1,4-Diethyl benzene
Daily Quality Control Standard(without Internal Standard)M-GRA-QC-10ML $ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML $ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAKSAVE 20% $ 900 / 5 x 10 mL
4 comps.
The 4 component internal standard mix (M-GRA-IS-R) is combined with the 25 component core calibrationcurve mixtures in a 12 to 100 weight ratio to formulate a complete calibration solution containing 29 comps.
Optional Sixth Standardwith 4 Comp. DeuteratedInternal Standard AddedM-GRA-ADD/IS-R $ 100 / 1 x 1 mL
Aromatics Calibration Standards Kit(4 Internal Standard Version)M-GRA-CAL-R/IS-R-SET $ 425 / set of 5 x 1 mL
Method 5769
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 3.13 1.78 0.95 0.490 0.2490Toluene 19.65 11.11 5.90 3.058 1.5547Ethylbenzene 5.12 2.92 1.55 0.805 0.4090m-Xylene 6.27 3.50 1.86 0.962 0.4891p-Xylene 6.33 3.50 1.86 0.962 0.4891o-Xylene 6.51 3.56 1.89 0.980 0.4981Isopropylbenzene 3.06 1.74 0.93 0.480 0.2439n-Propylbenzene 3.04 1.74 0.93 0.480 0.24403-Ethyltoluene 3.08 1.75 0.93 0.481 0.24464-Ethyltoluene 3.05 1.74 0.93 0.479 0.24371,3,5-Trimethylbenzene 3.07 1.75 0.93 0.481 0.24482-Ethyltoluene 3.14 1.78 0.95 0.490 0.24921,2,4-Trimethylbenzene 5.18 2.95 1.57 0.812 0.41301,2,3-Trimethylbenzene 3.19 1.81 0.96 0.498 0.2530Indan 3.46 1.95 1.04 0.536 0.27261,4-Diethylbenzene 3.04 1.74 0.93 0.480 0.2439n-Butylbenzene 3.05 1.74 0.92 0.479 0.24341,2-Diethylbenzene 3.22 1.78 0.95 0.490 0.24891,2,4,5-Tetramethylbenzene 2.10 1.20 0.64 0.329 0.16741,2,3,5-Tetramethylbenzene 2.09 1.20 0.64 0.330 0.1679Naphthalene 2.35 1.34 0.71 0.369 0.1877Pentamethylbenzene 2.16 1.23 0.66 0.340 0.17271-Methylnaphthalene 2.32 1.34 0.71 0.369 0.18772-Methylnaphthalene 2.41 1.37 0.73 0.378 0.1922Isooctane ----- 43.47 69.96 84.441 92.0905
Internal Standard(M-GRA-IS-R) Mix RatioBenzene-d6 (2 mL) 16.57 16.57 16.57 16.57 16.57Ethylbenzene-d10 (2 mL) 16.76 16.76 16.76 16.76 16.76Naphthalene-d8 (1 gm) 8.78 8.78 8.78 8.78 8.78Toluene-d8 (7 mL) 57.88 57.88 57.88 57.88 57.88
Core Calibr. Mix Optional Std. 624 Comps. Target Wt. %
Benzene 2.48Toluene 16.29Ethylbenzene 4.07m-Xylene 4.87p-Xylene 4.87o-Xylene 4.96Isopropylbenzene 2.43n-Propylbenzene 2.433-Ethyltoluene 2.444-Ethyltoluene 2.431,3,5-Trimethylbenzene 2.442-Ethyltoluene 2.481,2,4-Trimethylbenzene 4.111,2,3-Trimethylbenzene 2.52Indan 2.711,4-Diethylbenzene 2.43n-Butylbenzene 2.421,2-Diethylbenzene 2.481,2,4,5-Tetramethylbenzene 4.441,2,3,5-Tetramethylbenzene 1.67Naphthalene 1.87Pentamethylbenzene 1.721-Methylnaphthalene 1.872-Methylnaphthalene 1.91Isooctane 17.67
Internal Standard(M-GRA-IS-R) Mix RatioBenzene-d6 (2 mL) 16.57Ethylbenzene-d10 (2 mL) 16.76Naphthalene-d8 (1 mL) 8.78Toluene-d8 (7 mL) 57.88
Use with any M-GRA Calibration Curve.
Originally designed forD-5769-95
ASTM D-5769 Version with No Internal Standard
46 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
Wt.Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 1
14 Comp. Core Mix 100
Mix Compound RatioNaphthalene-d8 1 gmToluene-d8 7 mL
Wt.Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Daily Quality Control Standard(without Internal Standard)D-5769-QC-10ML $ 125 / 1 x 10 mLD-5769-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
Mix Compound RatioBenzene-d6 2 mLEthylbenzene-d10 2 mL
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gm
Calibration Curve with No Internal Std. AddedD-5769-CAL-SET-5ML $ 1500 / Set of 5 x 5 mLD-5769-CAL-SET-10ML $ 2750 / Set of 5 x 10 mL
Core Calibration Mix Target 23 Comps. Wt. %
Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 523 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105
Optional Sixth StandardD-5769-ADD-5ML $ 150 / 1 x 5 mLD-5769-ADD-10ML $ 300 / 1 x 10 mL
4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML $ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900 / 5 x 10 mL
4 comps.
3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML $ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL
3 comps.
The following D-5769 and M-GRA Standards were formulated to address proposed and promulgatedchanges to ASTM Method D-5769-98 Aromatics by GC/MS. Many of these changes were evaluated and/or adopted due to the results generated from the 1997 Round Robin, which used a select group of 21gasolines ampulized by AccuStandard.
AccuStandard is committed to staying abreast of ASTM committee D-02 method developments. We askthat you contact us when your analytical group finds a beneficial procedure or modification.
Modifications
A Sixth Standard was added to meet the latest D-5769 method requirements and provide improvedlinearity at the high end of the Calibration curve
The Calibration Curve was packaged in two convenient sizes without the internal standard. Thispackaging scheme allows for the addition of any ISTD formulation or oxygenate components.
The Quality Control Standard was reformulated in the latest D-5769 revision. The formulationchanges include reducing the 1,2,4,5-Tetramethylbenzene weight ratio and adding Naphthalene.
The Benzene Target Weight % has been increased to meet the latest D-5769 method requirements.
Pentamethylbenzene has now been removed from the analyte list.Disk Deliverable(At no additional charge)
Eliminates hand keyed-indata.
CALAMTS®
(Disk containing “CalibrationAmounts”)
Each analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.
Method 5769
Originally designed forD-5769-98
ASTM D-5769 Version with 3 Internal Standards
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 47
Member
ASTMASTM Standards
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gm
Includes M-GRA-IS (3 component mix) added in 5 to 100 weight ratio
Wt.Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 1
100
Wt.Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Optional Sixth Standardwith a 3 Comp. DeuteratedInternal Standard addedD-5769-ADD/IS $ 100 / 1 x 1 mL
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105
Core Calibration Mix Target 24 Comps. Wt. %
Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92
Mass Scan Range StandardM-GRA-MSR $ 20 / 1 x 1 mLM-GRA-MSR-PAK SAVE 20% $ 80 / 5 x 1 mL3.0% w/w in Isooctane
Toluene
Resolution StandardM-GRA-RES $ 30 / 1 x 1 mLM-GRA-RES-PAK $ 120 / 5 x 1 mL
Wt. % 3 comps.1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94
Compound Mix ratioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gm
Internal StandardM-GRA-IS
The 3 Comp. Internal Standard Mix (M-GRA-IS) iscombined with the 24 Comp. Core Calibration Curve Mixesabove in a 5 to 100 weight ratio to formulate these 27 Comp. calibration solutions.
Fragmentation Pattern StandardM-GRA-FP $ 20 / 1 x 1 mLM-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL3.0% w/w in Isooctane
1,2,3-Trimethylbenzene
Sensitivity Test SolutionM-GRA-ST $ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane
1,4-Diethyl benzene
3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML $ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL
3 comps.
Daily Quality Control Standard(with Internal Standard)D-5769-QC/IS-5ML $ 100 / 1 x 5 mLD-5769-QC/IS-5ML-PAK SAVE 20% $ 400 / 5 x 5 mL
17 comps.
Method 5769
Calibration Curve with a 3 Comp.DeuteratedInternal Standard addedD-5769-CAL/IS-SET $ 375 / 5 x 1 mL Test to
Low ppb
SulfurSee Pages 6-11
Originally designed forD-5769-98
ASTM D-5769 4 Internal Standard Version (includes Toluene-d8)
48 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
Compound Wt. %1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94
Compound Mix RatioNaphthalene-d8 1 gmToluene-d8 7 mL
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mL
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 1
100Includes M-GRA-IS-R (4 component mix) added in 12 to 100 weight ratio
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105
Core Calibration Mix Target 24 Comp. Wt. %
Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92
Optional Sixth Standardwith a 4 Comp. DeuteratedInternal Standard addedD-5769-ADD/IS-R $ 100 / 1 x 1 mL
Calibration Curve with a 4 Comp. DeuteratedInternal Standard addedD-5769-CAL/IS-R-SET $ 425 / 5 x 1 mL
Resolution StandardM-GRA-RES $ 30 / 1 x 1 mLM-GRA-RES-PAK SAVE 20% $ 120 / 5 x 1 mL
3 comps.
Compound Mix ratioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gmToluene-d8 7 mL
Internal StandardM-GRA-IS-R
The 4 Comp. Internal Standard Mix (M-GRA-IS-R) iscombined with the 24 component core calibrationcurve mixtures above in a 12 to 100 weight ratio toformulate these 28 component calibration solutions.
Fragmentation Pattern StandardM-GRA-FP $ 20 / 1 x 1 mLM-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL3.0 w/w in Isooctane
1,2,3-Trimethylbenzene
Sensitivity Test SolutionM-GRA-ST $ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane
1,4-Diethyl benzene
Daily Quality Control Standard(with Internal Standard)D-5769-QC/IS-R-5ML $ 100 / 1 x 5 mLD-5769-QC/IS-R-5ML-PAK SAVE 20% $ 400/5 x 5 mL
18 comps.
4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML $ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAK SAVE 20% $ 900/ 5 x 10 mL
Method 5769
Originally designed forD-5769-98
ASTM D-5769 New Proposed / Promulgated Method Modifications
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 49
Member
ASTMASTM Standards
Compound Wt. %1,3,5-Trimethylbenzene 3.01-Methyl-2-ethylbenzene 3.0Isooctane 94
Compound Mix RatioChlorobenzene 2 mL1,2-Dichlorobenzene 2 mL1,2,4-Trichlorobenzene 1 mL
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 2Naphthalene 1
100Includes M-GRA-IS-R2 (3 component mix) added in 5 to 100 weight ratio
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Core Calibration Mix Target 24 Component Wt.%
Benzene 4.16Toluene 16.41Ethylbenzene 4.10m-Xylene 4.91p-Xylene 4.91o-Xylene 5.00Isopropylbenzene 2.45n-Propylbenzene 2.453-Ethyltoluene 2.454-Ethyltoluene 2.441,3,5-Trimethylbenzene 2.462-Ethyltoluene 2.501,2,4-Trimethylbenzene 4.141,2,3-Trimethylbenzene 2.54Indan 2.731,4-Diethylbenzene 2.45n-Butylbenzene 2.441,2-Diethylbenzene 2.501,2,4,5-Tetramethylbenzene 1.681,2,3,5-Tetramethylbenzene 1.68Naphthalene 1.881-Methylnaphthalene 1.882-Methylnaphthalene 1.93Isooctane 19.92
Calibration Curve with a 3 Comp. ChlorinatedInternal Standard addedD-5769-CAL/IS-R2-SET $ 375 / 5 x 1 mL
Optional Sixth Standardwith a 3 Comp. ChlorinatedInternal Standard addedD-5769-ADD/IS-R2 $ 100 / 1 x 1 mL
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 524 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Benzene 5.25 2.95 1.575 0.8144 0.4143Toluene 19.67 11.06 5.898 3.0505 1.5519Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083m-Xylene 6.19 3.48 1.856 0.9598 0.4883p-Xylene 6.19 3.48 1.856 0.9598 0.4883o-Xylene 6.30 3.54 1.890 0.9776 0.4973Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Propylbenzene 3.09 1.74 0.926 0.4787 0.24353-Ethyltoluene 3.10 1.74 0.928 0.4801 0.24424-Ethyltoluene 3.08 1.73 0.925 0.4782 0.24331,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.24442-Ethyltoluene 3.15 1.77 0.945 0.4890 0.24881,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.41231,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526Indan 3.45 1.94 1.034 0.5350 0.27221,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435n-Butylbenzene 3.08 1.73 0.923 0.4776 0.24301,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.24851,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.16711,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676Naphthalene 2.37 1.34 0.712 0.3683 0.18741-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.18742-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919Isooctane ----- 43.77 70.015 84.4922 92.1105
Resolution StandardM-GRA-RES $ 30 / 1 x 1 mLM-GRA-RES-PAK SAVE 20% $ 120 / 5 x 1 mL
3 comps.
3 Comp. Chlorinated Internal Std. MixM-GRA-IS-R2-SET $125 / set of 25 x 1 mLM-GRA-IS-R2-25ML $ 100 / 1 x 25 mL
3 comps.
Compound Mix ratioChlorobenzene 2 mL1,2-Dichlorobenzene 2 mL1,2,4-Trichlorobenzene 1 mL
Internal StandardM-GRA-IS-R2
The 3 Comp. Internal Standard Mix (M-GRA-IS-R2)is combined with the 24 Comp. Core CalibrationCurve mixtures above in a 5 to 100 weight ratio toformulate these 27 Comp. calibration solutions.
Fragmentation Pattern StandardM-GRA-FP $ 20 / 1 x 1 mLM-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL3.0 w/w in Isooctane
1,2,3-Trimethylbenzene
Sensitivity Test SolutionM-GRA-ST $ 10 / 1 x 1 mLM-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL100 µg/mL in Isooctane
1,4-Diethyl benzene
Daily Quality Control Standard(with Internal Standard)D-5769-QC/IS-R2-5ML $ 100 / 1 x 5 mLD-5769-QC/IS-R2-5ML-PAKSAVE 20% $400/5 x 5 mL
17 comps.
Disk Deliverable(At no additional charge)
Eliminates hand keyed-indata.
CALAMTS®
(Disk containing “CalibrationAmounts”)
Each analyte in eachstandard is individuallyweighed. Actual weightsand weight percents areprovided.
For the mandatory real worldQC samples stipulated in theMethod, see pages 1-2.
Standards of Interest
Method 5769
Originally designed forD-5769-98
ASTM D-5769 Special QA/QC Formulations
50 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
Includes M-GRA-IS-R (4 Comp. Internal Standards mix) combined with the above 15 Comp.Core QC Mix: M-GRA-QC-R in a 12 to 100 Wt. ratio
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1Toluene 9
Includes M-GRA-IS (3 Comp. Internal StandardsMix) combined with the above 15 Comp. CoreQC Mix: M-GRA-QC-R in a 5 to 100 weight ratio
Wt. Compound RatioEthylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Pentamethylbenzene 11-Methylnaphthalene 1
15 Comp. Core Mix 100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1Toluene 9
AccuPAK®
Reduce reordering frequency
Reduce data entry time forCalibration tables due toLot No. consistency
Economical
Save 20-40%Buy AccuPAKs
Daily Quality Control Standard(with Internal Std. M-GRA-IS-R)M-GRA-QC-R/IS-R-5ML $ 125 / 1 x 5 mLM-GRA-QC-R/IS-R-5ML-PAK SAVE $ 500 / 5 x 5 mL
19 comps.
Daily Quality Control Standard(with Internal Standard M-GRA-IS)M-GRA-QC-R/IS-5ML $ 100 / 1 x 5 mLM-GRA-QC-R/IS-5ML-PAKSAVE 20% $ 400 / 5 x 5 mL
18 comps.
For use with any M-GRACalibration Curve
Daily Quality Control Standard(without Internal Standard)M-GRA-QC-R-10ML $ 125 / 1 x 10 mLM-GRA-QC-R-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
Method 5769
Wt. Compound RatioEthylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Pentamethylbenzene 11-Methylnaphthalene 1
100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1Toluene 9
Wt. Compound RatioEthylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 1Pentamethylbenzene 11-Methylnaphthalene 1
100
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gmToluene-d8 7 mL
Compound Mix RatioBenzene-d6 2 mLEthylbenzene-d10 2 mLNaphthalene-d8 1 gm
3 Comp. Deuterated Internal Std. MixM-GRA-IS-5ML $ 150 / 1 x 5 mLM-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL
3 comps.
4 Comp. Deuterated Internal Std. MixM-GRA-IS-R-10ML $ 225 / 1 x 10 mLM-GRA-IS-R-10ML-PAKSAVE 20% $ 900 / 5 x 10 mL
4 comps.
Specially formulated Daily Quality ControlStandards originally designed in response toclient requests for QC mixes that bracket thecurve and contain more C9+ analytes to verifythe instrument and QC solution integrity.
Technical Note
Originally designed forD-5769-98
Custom Ampulling for Bulk Quantity Requirements• Fill Volumes from 0.2 mL to 20 mL
• Flammables
• QC Services availableAccuStandard has the resources and equipment to meet your custom packagingrequirements. Our full automated filler-sealer can accommodate a fill range from0.5 to 20 mL, and ampule sizes from 1 mL to 20 mL.
AccuStandard has extensive experience with Round Robin samples for ASTMcommittees.
Call our Technical Department for a quotation.
ASTM D-5769-XX Calibration Curve with No Internal Standard Added
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 51
Member
ASTM
* The isooctane balance is theamount of material to make upa 100 mL calibration standard.Certificate will reflect actualweight of each component inthe 100 mL batch including theisooctane.
Technical Note
ASTM Standards
Composition of Daily QC StandardASTM-P-0140-QC $ 125 / 1 x 10 mLASTM-P-0140-QC-PAK $ 500 / 5 x 10 mL
9 comps.Target
Compound Mass %Benzene 1Toluene 10Ethylbenzene 31,3-Dimethylbenzene 61,2-Dimethylbenzene 31,2,4-Trimethylbenzene 31,2-Diethylbenzene 0.02Naphthalene 1Isooctane (solvent) * balance
Performance Evalutation StandardASTM-P-0140-PES $ 55 / 1 x 1 mLASTM-P-0140-PES-PAK $ 220 / 5 x 1 mL
11 comps.
Compound Mass %Naphthalene-d8 1Toluene-d8 7Isooctane * balance
4 Comp. Deuterated Internal Std. MixASTM-P-0140-IS2 $ 95 / 1 x 10 mLASTM-P-0140-IS2-PAK $ 380 / 5 x 10 mL
5 comps.
ASTM-P-0140-05
ASTM-P-0140-04
ASTM-P-0140-03
ASTM-P-0140-02
ASTM-P-0140-01
A = This component is a solid at roomtemperature
ASTM-P-0140-SET $ 1500 / Set of 5 x 5 mL
Core Calibr. Mix Level 1 Level 2 Level 3 Level 4 Level 5Compound Target Mass % Mass % Mass % Mass % Mass %
Benzene 5 3 1 0.5 0.1Toluene 12 9 6 3 0.5Ethylbenzene 5 3.75 2.5 1.25 0.21,3-Dimethylbenzene 10 7.5 5 2.5 0.21,4-Dimethylbenezene 5 3.75 2.5 1.25 0.21,2-Dimethylbenezene 5 3.75 2.5 1.25 0.2(1-Methylethyl)-benzene 3 2.25 1.5 0.75 0.21-Methyl-3-ethylbenzene 3 2.25 1.5 0.75 0.21-Methyl-4-ethylbenzene 3 2.25 1.5 0.75 0.21,3,5-Trimethylbenzene 3 2.25 1.5 0.75 0.21-Methyl-2-ethylbenzene 3 2.25 1.5 0.75 0.21,2,4-Trimethylbenzene 6 4.5 3 1.5 0.21,2,3-Trimethylbenzene 3 2.25 1.5 0.75 0.2Indan 3 2.25 1.5 0.75 0.21,2-Diethylbenzene 2 1.5 1 0.5 0.2NaphthaleneA 2 1.5 1 0.5 0.12-MethylnaphthaleneA 2 1.5 1 0.5 0.11-MethylnaphthaleneA 2 1.5 1 0.5 0.1Isooctane (solvent) * balance balance balance balance balance
4 Comp. Deuterated Internal Std. MixASTM-P-0140-IS $ 75 / 1 x 10 mLASTM-P-0140-IS-PAK $ 300 / 5 x 10 mL
4 comps.
Through a collaborative effort involving the instrument manufactures, Petrochemical end users, and Chemical Reference Standard manufacturers,the following proposed D-5769 method is under consideration. A number of end users would like to evaluate this proposed D-5769 method andhave asked AccuStandard to make the standards. We have formulated the following certified standards to meet those requests.
Summary Proposed Modifications for D-5769• Calibration standards when combined with internal standards are diluted into significantly more isooctane.• The analytes in the Performance Standard have been expanded to better tune the GC/MS system for optimum performance.• The number of components in the QA/QC mix has been reduced with new QA/QC tolerances.• The number of analytes in the calibration mix has been reduced.• Samples that exceed the linear range are to be diluted, reducing the number of extra calibration points required.
Method 5769
Compound Mass %Benzene-d6 2Ethylbenzene-d10 2
Compound Mass %Naphthalene-d8 1Isooctane * balance
Compound Mass %Benzene-d6 2Ethylbenzene-d10 2
TargetCompound Mass %Benzene 11,2-Diethylbenzene 0.0051,3,5-Trimethylbenzene 11-Methyl-2-ethylbenzene 1Styrene 0.1Indene 0.1Biphenyl 0.11,2,4,5-Tetramethylbenzene 11,2,3,5-Tetramethylbenzene 1Hexadecane 1Isooctane:Toluene(1:1) * balance
ASTM D-5863 Nickel, Vanadium, Iron, & Sodium in Crude Oils & Residual Fuels byFlame AA Spectrometry
ASTM D-5773 Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D-5772 Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D-5771 Cloud Point of Petroleum Products
52 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.
See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.
See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.
See page 73-75 for additionalTrace Metal Standards by AA.
Standards of Interest
µg/gVanadium 150
µg/mLVanadium 200
µg/mLIron 100 Nickel 200
See pages 59-65 for AccuStandard’scomprehensive line of Certified Oil DissolvedWear Metal calibration standards designed forflame AA Applications.
Standards of Interest
µg/gSodium 50 Nickel 200
Test Method A - Sample Decomposition with Acid for Total Ni, V and FeDetermination
ASTM Standards
Individual High Concentration Elements in Aqueous Matrix
Stock Multi-Element Standard inMineral Oil D-5863-95B-10X $ 160 / 1 x 4 ozAt stated conc. in 20 cst Mineral Oil 3 comps.
1,000 µg/mL Conc.Element Matrix Unit Cat. No. Price
Iron Fe 500 mL ICP-27N-5 $ 67
in HNO3
Nickel Ni 500 mL ICP-37N-5 67in HNO3
Vanadium V2O5 500 mL ICP-67N-5 67
in HNO3
Matrix BlankNitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L SAVE 33% $ 45 / L (2 x 500 mL)
5% HNO3 in ASTM Type I Water
Stock Multi-ElementAqueous StandardD-5863-95A-10X-1 $ 75 / 1 x 100 mL2-5% HNO3 3 comps.
Test Method B - Sample Dilution with Organic Solvent for the Determination ofNi, V and Na using Oil-Soluble Metals as Calibrants.
Method 5771577257735863
Originally designed forD-5863-00
WEA
R M
ETAL
S
ASTM D-5986 Oxygenates, Benzene, Toluene, C8-C12, Aromatics & Total Aromatics in Finished Gasolines by GC/FTIR
ASTM D-5972 Freezing Point Aviation Fuels (Automated Phase Transition Method)
ASTM D-5901 Freezing Point Aviation Fuels (Automated Optical Method)
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 53
Member
ASTMASTM Standards
AccuStandard formulated this quality controlstandard to meet Section 11 of ASTM D-5986-96 specifications stipulating to“analyze the quality control reference materialbefore every batch of samples. Bracket thesamples with the reference materials”.
Oxygenate QC samples are available onpages 1- 2 or can be custom formulated.
Technical Note
See page 34 for AccuStandard’sOxygenate Calibration Curve(Cat. No. M-GRO-CAL-SET)and page 46 for AccuStandard’sAromatic Calibration Curve (Cat.No. D-5769-CAL-SET-5ML).
Standards of Interest
Wt. Compound RatioToluene 9Ethylbenzene 3m-Xylene 3o-Xylene 31,2,4-Trimethylbenzene 31,2,4,5-Tetramethylbenzene 3
13 Comp. Core Mix 100
Wt. Compound Ration-Hexane 12n-Heptane 17n-Octane 17n-Decane 12n-Dodecane 5Isooctane 12Benzene 1
Daily Quality Control Standard(without Internal Standard)M-GRA-QC-10ML $ 125 / 1 x 10 mLM-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
Also see Cloud Point standardsused for ASTM Method D-2500on page 5.
Standards of Interest
See page 5 for AccuStandard’s comprehensive line of Certified Freezing Point Standards.
See page 5 for AccuStandard’s comprehensive line of Certified Freezing Point Standards.
Method 5901 -5986
Cross Reference TableASTM IP ISO DIN JIS AFNOR sorted by
ASTM Method see beginning of Catalog
Originally designed forD-5986-96
ASTM D-6277 Benzene in Spark - Ignition Engine Fuels using Mid Infrared Spectroscopy
ASTM D-6258 Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D-6160 Polychlorinated Biphenyls (PCBs in Waste Materials by GC)
54 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
See page 1 for AccuStandard’s QA/QC material reference in the method.
Solvent Red 26 is the azo dyestandard against which theconcentration of Solvent Red164 is measured. The visiblespectrum of Solvent Red 164 isvirtually identical to thespectrum of Solvent Red 26.
Technical Note
Stock Solvent Red 26 StandardD-6258-CONC-5ML $ 45 / 1 x 5 mL
Solvent Red 26 @ 300 µg/mL in Xylene
D-6258 Calibration CurveD-6258-CAL-SET-5ML $ 125 / set of 6 x 5 mL
Set includes the following Cat. No.’s
Cat. No. Description Unit
D-6258-BL Xylene Blank 1 x 5 mLD-6258-01 Solvent Red 26 Dye @ 3 µg/mL in Xylene 1 x 5 mLD-6258-02 Solvent Red 26 Dye @ 6 µg/mL in Xylene 1 x 5 mLD-6258-03 Solvent Red 26 Dye @ 9 µg/mL in Xylene 1 x 5 mLD-6258-04 Solvent Red 26 Dye @ 12 µg/mL in Xylene 1 x 5 mLD-6258-05 Solvent Red 26 Dye @ 15 µg/mL in Xylene 1 x 5 mL
Additional Ready-to-InjectPCB Aroclor CalibrationCurves available in our Organic Catalog
SAVE 20%in PAK
(35 µg/mL in (35 µg/mL in (35 µg/mL in Isooctane) MeOH) Hexane) 1 x 1 mL 5 x 1 mL
Aroclor # Cat. No. Cat. No. Cat. No. Price Cat. No. Price
Aroclor 1016 C-216S C-216S-M C-216S-H-10X $ 15 Cat. #-PAK $ 60Aroclor 1221 C-221S C-221S-M C-221S-H-10X 15 Cat. #-PAK 60Aroclor 1232 C-232S C-232S-M C-232S-H-10X 15 Cat. #-PAK 60Aroclor 1242 C-242S C-242S-M C-242S-H-10X 15 Cat. #-PAK 60Aroclor 1248 C-248S C-248S-M C-248S-H-10X 15 Cat. #-PAK 60Aroclor 1254 C-254S C-254S-M C-254S-H-10X 15 Cat. #-PAK 60Aroclor 1260 C-260S C-260S-M C-260S-H-10X 15 Cat. #-PAK 60Aroclor 1262 C-262S C-262S-M C-262S-H-10X 15 Cat. #-PAK 60Aroclor 1268 C-268S C-268S-M C-268S-H-10X 15 Cat. #-PAK 60
Kit of all 9 above Z-008S Z-008S-M Z-008S-H-10X $ 78 / 9 x 1 mL
Aroclor Solutions (Individual and Kit)
Method 616062586277
Originally designed forD-6160-98
Originally designed forD-6258-98
Member
AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport, ext. 117 for an updated product.
ASTM D-6296 Total Olefins in Spark-Ignition Engine Fuels by Multidimensional GC
ASTM D-6293 Oxygenates & Paraffin, Olefin, Naphthene, Aromatics (O-PONA) Hydrocarbontypes in Low-Olefin Spark-Ignition Engine Fuels by GC
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 55
Member
ASTMASTM Standards
Wt./Wt. %n-Nonane 3.0n-Decane 3.0
O-PONA Paraffin MixASTM-P-0082-R1 $ 25 / 1 x 1 mLASTM-P-0082-R1-PAK$ 100 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)
2 comps.For the mandatory real world QC samplesstipulated in QA/QC section 8.6 of the methodsee pages 1-2.
Standards of Interest
O-PONA System Validation MixtureASTM-P-0080 $ 135 / 1 x 1 mLASTM-P-0080-PAK SAVE 26% $ 500 / 5 x 1 mL
33 comps.
Wt./Wt. %Benzene 2.5Toluene 2.5trans-Decahydronaphthelene 3.5n-Tetradecane 2.0Ethylbenzene 3.5o-Xylene 3.0n-Propylbenzene 3.51,2,4-Trimethylbenzene 3.01,2,3-Trimethylbenzene 2.01,2,4,5-Tetramethylbenzene 2.0Pentamethylbenzene 2.5Ethanol 5.0t-Butanol 4.0MtBE 8.0ETBE 3.0TAME 5.0
Wt./Wt. %n-Nonane 5.0n-Decane 2.0
O-PONA Paraffin MixASTM-P-0082 $ 25 / 1 x 1 mLASTM-P-0082-PAK $ 100 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)
2 comps.
Wt./Wt. %1-Pentene 5.01-Hexene 2.01-Heptene 2.01-Octene 2.01-Nonene 3.0
O-PONA Olefin MixASTM-P-0081 $ 45 / 1 x 1 mLASTM-P-0081-PAK $ 180 / 5 x 1 mLAt stated conc. in Hexane : Heptane (1:1)
5 comps.Wt./Wt. %Cyclopentane 1.5n-Pentane 1.5Cyclohexane 2.02,3-Dimethylbutane 2.0n-Hexane 2.01-Hexene 1.5Methylcyclohexane 3.54-Methyl-1-hexene 1.5n-Heptane 3.0cis-1,2-Dimethylcyclohexane 4.5Isooctane 4.0n-Octane 4.01,2,4-Trimethylcyclohexane 3.5n-Nonane 3.0n-Decane 3.5n-Undecane 2.0n-Dodecane 2.0
Isooctane Blank Compensation StandardD-6296-BL $ 15 / 1 x 5 mL
Isooctane (Neat)
Wt. %Decane 1.0Undecane 1.0Dodecane 1.0Isooctane 86.0ETBE 5.0
Wt. %Decene 1.0Undecane 1.0Dodecane 1.0Isooctane 87.0MTBE 5.0
Wt. %Pentene 1.0Hexene 1.0Heptene 1.0Octene 1.0Nonene 1.0
System Setup & Verification StandardsD-6296-VER-SET $ 40 / 2 x 1 mLSet contains 1 ampule of each Cat. No. listed below
D-6296-VER-SET-PAK SAVE 23% $ 150 / 5 x (2 x 1 mL)5 sets containing 1 ampule of each Cat. No. listed below
Wt. %ETBE 5%Isooctane 95%
System Setup & Verification StandardsD-6296-VER2 1 x 1 mL
2 comps.Wt. %MTBE 5%Isooctane 95%
System Setup & Verification StandardsD-6296-VER1 1 x 1 mL
2 comps.
Wt. %Pentene 1.0Hexene 1.0Heptene 1.0Octene 1.0Nonene 1.0Decene 1.0
Calibration Standard with ETBED-6296-CAL2 $ 65 / 1 x 1 mLD-6296-CAL2-PAK SAVE 23% $ 250 / 5 x 1 mL
11 comps.
Calibration Standard with MTBED-6296-CAL1 $ 65 / 1 x 1 mLD-6296-CAL1-PAK SAVE 23% $ 250 / 5 x 1 mL
10 comps.
Method 62936296
Originally designed forD-6293-98
Originally designed forD-6296-98
ASTM D-6304 Determination of Water in Petroleum Products Lubricating oil, andadditives by Coulometric Karl Fischer Titration
ASTM D-6378 Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, & Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
ASTM D-6352 Boiling Range Distribution of Petroleum Distillates from 174 to 700ºC by GC
ASTM D-6334 Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
56 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
ASTM Standards
Column Test MixtureASTM-D2887 $ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.
n-Hexadecane n-Octadecane
Calibration MixDRH-002N $ 10 / 100 mgDRH-002N-10X $ 40 / 1 gm
17 comps.
Wt. %n-Octadecane 5n-Eicosane 2n-Tetracosane 2n-Octacosane 1n-Dotriacontane 1n-Hexatriacontane 1n-Tetracontane 1n-Tetratetracontane 1
Wt. %n-Hexane 6n-Heptane 6n-Octane 8n-Nonane 8n-Decane 12n-Undecane 12n-Dodecane 12n-Tetradecane 12n-Hexadecane 10
Polywax 1000®
ASTM-P-0138N-2G $ 20 / 2 grams
Polywax 1000
Polywax 850®
ASTM-P-0137N-2G $ 20 / 2 grams
Polywax 850
Polywax 655®
ASTM-P-0053N-2G $ 20 / 2 grams
Polywax 655
Polywax 500®
ASTM-P-0051N-2G $ 20 / 2 grams
Polywax 500 Contact AccuStandard’sTechnical Departmentregarding the availability of aQA/QC Reference Oil Sampleunder development in ASTM.
Standards of Interest
See Sulfur Standards Group listing in the Table of Contents for AccuStandard’s comprehensiveline of Certified Sulfur Calibration Standards.
See pages 29 & 32 for AccuStandard’s comprehensive line of Vapor Pressure Standards &Instrument Quality Control Samples.
Method 630463346352
See page 5 for AccuStandard’s comprehensive line of Certified Water Standards, forKarl Fischer Analysis.
Triacontanen-HentriacontaneDotriacontaneTritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontane
NonadecanePhytaneEicosaneHeneicosaneDocosaneTricosaneTetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosane
OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecaneHeptadecaneOctadecanePristane
Hydrocarbon WindowDefining Standard*DRH-008S-R2 $ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.
* Can be shipped by Air and Sea
Originally designed forD-6352-98
ASTM D-6428 Sulfur by Combustion and Electrochemical Detection
ASTM D-6417 Estimation of Engine Oil Volatility by Capillary GC
D-6591 Aromatic Hydrocarbon Types in Middle Distillates - IP 391 HPLC method with Refractive Index Detection
ASTM D-6379 Aromatic Hydrocarbon Types in Aviation Fuels & Petroleum Distillates - HPLC method with Refractive Index
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com 57
Member
ASTMASTM Standards
D-6379 Calibration CurveD-6379-SET $ 100 / 4 x 1 mLD-6379-SET-PAK SAVE 30% $ 350 / 5 x (4 x 1 mL)At stated Conc. in n-Heptane
Analyte Std. 1 Std. 2 Std. 3 Std. 4(mg/mL) (mg/mL) (mg/mL) (mg/mL)
Cyclohexane 5 2 0.5 0.1o-Xylene 15 5 1.0 0.11-Methyl naphthalene 5 1.0 0.2 0.05
Cyclohexane 10 mg/mLo-Xylene 0.5 mg/mL1-Methyl naphthalene 0.05 mg/mL
Cyclohexane 10 mg/mLo-Xylene 5.0 mg/mLDibenzothiophene 0.5 mg/mL9-Methylanthracene 0.5 mg/mL
System Performance StandardASTM-P-0135 $ 75 / 1 x 5 mLASTM-P-0135-PAK SAVE 20% $ 300 / 5 x 5 mLAt stated Conc. in n-Heptane 4 comps.
IP 391-95 Calibration CurveASTM-P-0136-SET $ 145 / 4 x 1 mLAt stated Conc. in n-Heptane
Analyte Std. 1 Std. 2 Std. 3 Std. 4(mg/mL) (mg/mL) (mg/mL) (mg/mL)
Cyclohexane 50 20 5 1o-Xylene 40 10 2.5 0.51-Methyl naphthalene 40 10 2.5 0.2Phenanthrene 4 2 0.5 0.1
See page 15 for Alkane and Polywax standards suitable for D-6417.
System Resolution StandardD-6379-SRS $ 40 / 1 x 1 mLD-6379-SRS-PAK SAVE 30% $ 140 / 5 x 1 mLAt stated Conc. in n-Heptane 3 comps.
D-6428-R1-4-SET $ 300 / 7 x 4 ozD-6428-R1-SET $ 65 / 7 x 1 mLSulfur as Dibenzothiophene
NEW
See ASTM Methods D-3710,D-5307, D-5442, D-6352 foradditional calibrationstandards for hydrocarbonanalysis.
Standards of Interest
D-6428-R1-4-SET D-6428-R1-SETDescription Cat. No. Unit Cat. No. Unit
Sulfur Blank D-6428-BL-4 4 oz D-6428-BL 1 mLSulfur @ 0.1 µg/g D-6428-0.1X-4 4 oz D-6428-0.1X 1 mLSulfur @ 0.5 µg/g D-6428-0.5X-4 4 oz D-6428-0.5X 1 mLSulfur @ 1.0 µg/g D-6428-1X-4 4 oz D-6428-1X 1 mLSulfur @ 2.5 µg/g D-6428-2.5X-4 4 oz D-6428-2.5X 1 mLSulfur @ 5.0 µg/g D-6428-5X-4 4 oz D-6428-5X 1 mLSulfur @ 10 µg/g D-6428-10X-4 4 oz D-6428-10X 1 mL
D-6428-R2-4-SET $ 275 / 6 x 4 ozD-6428-R2-SET $ 65 / 6 x 1 mLSulfur as Dibenzothiophene
Method 6379IP 391
64176428
D-6428-R2-4-SET D-6428-R2-SETDescription Cat. No. Unit Cat. No. Unit
Sulfur Blank D-6428-BL-4 4 oz D-6428-BL 1 mLSulfur @ 10 µg/g D-6428-10X-4 4 oz D-6428-10X 1 mLSulfur @ 25 µg/g D-6428-25X-4 4 oz D-6428-25X 1 mLSulfur @ 50 µg/g D-6428-50X-4 4 oz D-6428-50X 1 mLSulfur @ 75 µg/g D-6428-75X-4 4 oz D-6428-75X 1 mLSulfur @ 100 µg/g D-6428-100X-4 4 oz D-6428-100X 1 mL
Originally designed forD-6379-99
ASTM D-6550 Olefin Content of Gasolines by SFC
ASTM D-6481 P, S, Ca and Zn in Lube Oils by ED-XRF
ASTM D-6445 Sulfur in Gasoline by ED - XRF
ASTM D-6443 Ca, Cl, Cu, Mg, P, S, Zn in Unused Lubricating Oils & Additives byWavelength Dispersive X-ray Fluorescence & Spectrometry
58 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Member
ASTM
See page 2 for consensus valueQA/QC material available forthis method.
Standards of Interest
ASTM Standards
AccuStandard worked inconjunction with the D-02technical committee and ShellOil to develop this stock OlefinStandard proven useful increating the required calibrationcurve.
Technical Note
Wt. %3-Methyl-1,3-pentadiene 22-Methyl-1-butene 252-Methyl-2-pentene 101-Heptene 102-Methyl-1-octene 2.52-Methyl-1-heptene 55-Methyl-1-hexene 10
Wt. %1-Nonene 2.5Cyclohexene 51-Hexene 51-Octene 51-Decene 52-Methyl-1,3-butadiene 54-Methyl-1-pentene 51,5-Hexadiene 3
Stock Olefin Calibration StandardD-6550-CONC $ 80 / 1 x 1 mLD-6550-CONC-5ML $ 350 / 1 x 5 mLAt stated Conc. by Wt. % 15 comps.
Lubricating Oil, Elements, EDXRF ASTM Method(Nominal Value) Wt.% listed belowASTM-P-0114-SET $ 1900 / 17 x 100 mL
Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0114-01 0.005 0.005 0.050 0.050ASTM-P-0114-02 0.600 0.000 0.000 0.000ASTM-P-0114-03 0.000 0.300 0.000 0.000ASTM-P-0114-04 1.000 0.000 1.000 0.000ASTM-P-0114-05 0.000 0.000 0.000 0.300ASTM-P-0114-06 0.005 0.250 0.800 0.300ASTM-P-0114-07 0.500 0.150 0.500 0.150ASTM-P-0114-08 0.010 0.200 0.100 0.250ASTM-P-0114-09 0.050 0.010 0.400 0.075ASTM-P-0114-10 0.100 0.150 0.200 0.200ASTM-P-0114-11 0.200 0.200 0.800 0.100ASTM-P-0114-12 0.400 0.005 0.800 0.300ASTM-P-0114-13 0.600 0.100 0.500 0.050ASTM-P-0114-14 0.800 0.010 0.050 0.100ASTM-P-0114-15 1.000 0.300 1.000 0.150ASTM-P-0114-16 0.400 0.050 0.600 0.250ASTM-P-0114-17 0.000 0.000 0.000 0.000
See the Sulfur Standards Group listing in the Table of Contents for AccuStandard’scomprehensive line of Certified Sulfur Calibration Standards.
Lubricating Oil, Elements, WLXRF ASTM Method (Nominal Value) Wt.% listed belowASTM-P-0117-SET $ 2100 / 10 x 100 mL
Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000
See the Wear Metal Grouplisting in the Table of Contentsfor AccuStandard’scomprehensive line of CertifiedOil Dissolved Wear MetalCalibration Standards.
Standards of Interest
Method 644364816550
Originally designed forD-6443-99
Originally designed forD-6481-99
Originally designed forD-6550-00
WEA
R M
ETAL
S
Organometallic Wear Metals Single Elements
Organometallic Wear Metals
59Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ORGANOMETALLICC
59
Matrix Oil & Stabilizer
Organometallic Standardsfor AA, ICP, DCP & XRF Analysis
These Standards were formulated for the analysis of metals in oils and other organic matrices. These Standardsand curves provide a convenient way to analyze for metals (wear metals, additives and contaminants) inlubricating oils, gasolines, residual oils, crude oils, turbine fuels and environmental samples.
All standards undergo rigorous quality assurance checks. Major constituents in the final Standard are typicallyanalyzed by both plasma emission and rotrode techniques.
Organometallic Standards listed on this page may contain sulfur which can be introduced by possible sulfonatestarting materials used to formulate the actual organometallic standard.
AccuStandard has developed a New Premium Organometallic line for those clients preferring to haveorganometallic standards with <1 ppm sulfur or phosphorous (see Table of Contents).
Single & Multi Element StandardsPrepared Calibration CurvesFormulated from Ultra High PurityOrganometallic Starting materials &matricesComprehensive Certificate of Analysis
Organometallic AA Organometallic ICP/XRF Organometallic ICP/XRF@ 1000 µg/g in @ 1000 µg/g in 20 cSt @ 5000 µg/g in 75 cSt
hydrocarbon oil base oil base oil100 mL 2 oz. bottle 2 oz. bottle
Element Cat. No. Price Cat. No. Price Cat. No. Price
Aluminum WM-AA-01 $ 36 WM-20CST-01 $ 32 WM-75CST-01-5X $ 45Antimony WM-AA-02 36 WM-20CST-02 32 WM-75CST-02-5X 45Arsenic -------------- WM-20CST-03 40 ------------------------Barium WM-AA-04 36 WM-20CST-04 32 WM-75CST-04-5X 45Bismuth -------------- WM-20CST-06 32 WM-75CST-06-5X 45Boron WM-AA-07 36 WM-20CST-07 32 WM-75CST-07-5X 45Cadmium WM-AA-08 36 WM-20CST-08 32 WM-75CST-08-5X 45Calcium WM-AA-09 36 WM-20CST-09 32 WM-75CST-09-5X 45Chromium WM-AA-13 36 WM-20CST-13 32 WM-75CST-13-5X 45Cobalt WM-AA-14 36 -------------------- ------------------------Copper WM-AA-15 36 WM-20CST-15 56 WM-75CST-15-5X 170Iron WM-AA-27 36 WM-20CST-27 32 WM-75CST-27-5X 45Lead WM-AA-29 36 WM-20CST-29 32 WM-75CST-29-5X 45Lithium WM-AA-30 36 WM-20CST-30 32 WM-75CST-30-5X 45Magnesium WM-AA-32 36 WM-20CST-32 32 WM-75CST-32-5X 45Manganese WM-AA-33 36 WM-20CST-33 32 WM-75CST-33-5X 45Mercury -------------- WM-20CST-34 42 ------------------------Molybdenum WM-AA-35 36 WM-20CST-35 32 WM-75CST-35-5X 45Nickel WM-AA-37 36 WM-20CST-37 32 WM-75CST-37-5X 45Phosphorous WM-AA-41 36 WM-20CST-41 32 WM-75CST-41-5X 45Potassium WM-AA-43 36 WM-20CST-43 32 WM-75CST-43-5X 45Scandium -------------- WM-20CST-50 130 ------------------------Silicon WM-AA-52 36 WM-20CST-52 56 WM-75CST-52-5X 170Silver WM-AA-53 36 WM-20CST-53 56 WM-75CST-53-5X 170Sodium WM-AA-54 36 WM-20CST-54 32 WM-75CST-54-5X 45Strontium WM-AA-55 36 WM-20CST-55 32 ------------------------Thallium -------------- WM-20CST-60 42 ------------------------Tin WM-AA-63 36 WM-20CST-63 32 WM-75CST-63-5X 45Titanium WM-AA-64 36 WM-20CST-64 32 WM-75CST-64-5X 45Vanadium WM-AA-67 36 WM-20CST-67 32 WM-75CST-67-5X 45Zinc WM-AA-70 36 WM-20CST-70 32 WM-75CST-70-5X 45Zirconium -------------- WM-20CST-71 32 WM-75CST-71-5X 45
Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)
Ag (Silver)Al (Aluminum)Cr (Chromium)Cu (Copper)
Fe (Iron)Mg (Magnesium)Na (Sodium)Ni (Nickel)
Each Wear Metal Standard contains the below list of 12elements in hydrocarbon oil at the stated concentration
12 Wear Metal Multi-Element StandardConc. Cat. No. Price Cat. No. Price(µg/g)
10 WM-12-1X-4 $ 70 WM-12-1X-8 $ 9030 WM-12-3X-4 70 WM-12-3X-8 9050 WM-12-5X-4 80 WM-12-5X-8 100100 WM-12-10X-4 85 WM-12-10X-8 150300 WM-12-30X-4 100 WM-12-30X-8 180500 WM-12-50X-4 150 WM-12-50X-8 270900 WM-12-90X-4 210 WM-12-90X-8 380
WM-12-SET-4 $ 700 WM-12-SET-8 $ 1100set of above 7 x 4 oz. set of above 7 x 8 oz.
Each Wear Metal Standard contains the below list of 21elements in hydrocarbon oil at the stated concentration
21 Wear Metal Multi-Element StandardConc. Cat. No. Price Cat. No. Price(µg/g)
10 WM-21-1X-4 $ 80 WM-21-1X-8 $ 10030 WM-21-3X-4 80 WM-21-3X-8 10050 WM-21-5X-4 85 WM-21-5X-8 105100 WM-21-10X-4 90 WM-21-10X-8 160300 WM-21-30X-4 145 WM-21-30X-8 260500 WM-21-50X-4 210 WM-21-50X-8 380900 WM-21-90X-4 320 WM-21-90X-8 580
WM-21-SET-4 $ 900 WM-21-SET-8 $ 1500set of above 7 x 4 oz. set of above 7 x 8 oz.
Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)
Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)
Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)
Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)
Wear Metals
Metals Additives StandardsMA-900-4 $ 100 / 4 oz.MA-900-8 $ 140 / 8 oz.
Ba, Ca, Mg, P and Zn at 900 µg/g each inHydrocarbon oil
Desc. Cat. No. Price
75 cSt Oil MOSOL-75-16 $ 10 / 16 oz.
20 cSt Oil MOSOL-20-16 $ 10 / 16 oz.
StabilizerIS-7281-2OZ $ 95 / 1 x 2 oz.
Test toLow ppb
SulfurSee Pages 6-11
Stabilization Solutions
These standards are sulfur free (belowdetection limits) organometallic standardsfor X-ray Fluorescence (XRF), plasmaemission (ICP or DCP), rotating disk(rotrode), or atomic absorption (AA). Theyare stabilized for blending together withother Analytes to prepare multi-elementstandards.
Technical Note
Sulfur/Phosphorous free (< 1 ppm)
Ready for Use
These highly concentrated stabilized solutions can be used for customer specific formulations of additive elements in lubricating oils, iron, nickel and vanadiumin residual oil, and wear metals in oils. These organometallic solutions can also be used to prepare single element or multi-element standards for plasmaemission (ICP or DCP), rotating disk (rotrode), or atomic absorption spectroscopy (AA). The starting materials for the standards are PURE REAGENTS andhave been certified against NIST SRM’s whenever available. THEY DO NOT CONTAIN PHOSPHORUS OR SULFUR. TRACE IMPURITIES AREDOCUMENTED ON THE CERTIFICATE OF ANALYSIS.
Highly Concentrated Liquid Organo-Metallic Standards
Stabilized
60 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ORGA
NOME
TALL
ICC
Organometallic Single-Element Stock StandardsSulfur free Organometallic Sulfur free Organometallic
Element @ 1000 µg/g Price @ 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mL
Aluminum WM-NMS-01 $ 50 WM-NMS-01-5X $ 90Antimony WM-NMS-02 50 WM-NMS-02-5X 90Barium WM-NMS-04 50 WM-NMS-04-5X 90Cadmium WM-NMS-08 50 WM-NMS-08-5X 90Calcium WM-NMS-09 50 WM-NMS-09-5X 90Chromium WM-NMS-13 50 WM-NMS-13-5X 90Cobalt WM-NMS-14 75 WM-NMS-14-5X 110Copper WM-NMS-15 75 WM-NMS-15-5X 110Iron WM-NMS-27 50 WM-NMS-27-5X 90Lead WM-NMS-29 50 WM-NMS-29-5X 90Magnesium WM-NMS-32 50 WM-NMS-32-5X 90Manganese WM-NMS-33 50 WM-NMS-33-5X 90Molybdenum WM-NMS-35 50 WM-NMS-35-5X 90Nickel WM-NMS-37 50 WM-NMS-37-5X 90Phosphorous WM-NMS-41 50 WM-NMS-41-5X 90Potassium WM-NMS-43 50 WM-NMS-43-5X 90Selenium WM-NMS-51 60 WM-NMS-51-5X 100Silicon WM-NMS-52 75 WM-NMS-52-5X 110Sodium WM-NMS-54 50 WM-NMS-54-5X 90Strontium WM-NMS-55 50 WM-NMS-55-5X 90Thallium WM-NMS-60 60 WM-NMS-60-5X 100Tin WM-NMS-63 50 WM-NMS-63-5X 90Titanium WM-NMS-64 50 WM-NMS-64-5X 90Vanadium WM-NMS-67 50 WM-NMS-67-5X 90Yttrium WM-NMS-68 60 WM-NMS-68-5X 100Zinc WM-NMS-70 50 WM-NMS-70-5X 90Zirconium WM-NMS-71 50 WM-NMS-71-5X 90
Organometallic Single-Element ConcentratesElement Conc. (Wt. %) Cat. No. Price Cat. No. Price
25 grams 50 grams
Aluminum 3 WM-NMS-01-30X-25G $ 150 WM-NMS-01-30X-50G $ 210Barium 12.5 WM-NMS-04-125X-25G 540 WM-NMS-04-125X-50G 780Boron 2.5 WM-NMS-07-25X-25G 130 WM-NMS-07-25X-50G 180Cadmium 10 WM-NMS-08-100X-25G 510 WM-NMS-08-100X-50G 710Calcium 5 WM-NMS-09-50X-25G 250 WM-NMS-09-50X-50G 355Chromium 2.5 WM-NMS-13-25X-25G 145 WM-NMS-13-25X-50G 200Cobalt 7.5 WM-NMS-14-75X-25G 330 WM-NMS-14-75X-50G 450Copper 6 WM-NMS-15-60X-25G 250 WM-NMS-15-60X-50G 355Iron 4 WM-NMS-27-40X-25G 220 WM-NMS-27-40X-50G 300Lead 20 WM-NMS-29-200X-25G 900 WM-NMS-29-200X-50G 1260Magnesium 3 WM-NMS-32-30X-25G 180 WM-NMS-32-30X-50G 252Manganese 7.5 WM-NMS-33-75X-25G 330 WM-NMS-33-75X-50G 450Molybdenum 5 WM-NMS-35-50X-25G 215 WM-NMS-35-50X-50G 294Nickel 5 WM-NMS-37-50X-25G 250 WM-NMS-37-50X-50G 350Phosphorus 5 WM-NMS-41-50X-25G 250 WM-NMS-41-50X-50G 350Praseodymium 3 WM-NMS-44-30X-25G 175 WM-NMS-44-30X-50G 240Selenium 3.5 WM-NMS-51-35X-25G 200 WM-NMS-51-35X-50G 270Strontium 10 WM-NMS-55-100X-25G 510 WM-NMS-55-100X-50G 710Thallium 5 WM-NMS-60-50X-25G 265 WM-NMS-60-50X-50G 360Titanium 5 WM-NMS-64-50X-25G 215 WM-NMS-64-50X-50G 295Vanadium 2 WM-NMS-67-20X-25G 115 WM-NMS-67-20X-50G 150Zinc 6 WM-NMS-70-60X-25G 270 WM-NMS-70-60X-50G 380Zirconium 5 WM-NMS-71-50X-25G 250 WM-NMS-71-50X-50G 355
Wear Metals
Sulfur belowdetection limits
PremiumSulfur-Free
Organometallic StandardsPremium Sulfur-Free
The solutions were specificallydesigned for chelating and solubilizingthe organometallic line of solids andsolutions for single and multi-elementstandards.
Stabilizer Solutions AASTM-P-0122-0.5 $ 80 / 50 mLASTM-P-0122-1 $ 120 / 100 mL
Stabilizer Solutions BASTM-P-0123-0.5 $ 80 / 50 mLASTM-P-0123-1 $ 120 / 100 mL(use in conjunction with stabilizer solution A)
Wear Metals Multi-Element
21 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates
Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)
Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)
12 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates
Ag (Silver)Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)
Na (Sodium)Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)
Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)
11 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates
20 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates
Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)
Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)
61Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ORGANOMETALLICC
Test toLow ppb
SulfurSee Pages 6-11
Wear Metals
Sulfur belowdetection limits
PremiumSulfur-Free
Organometallic StandardsPremium Sulfur-Free
Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Na (Sodium)
Each Wear Metal Standard contains11 elements in hydrocarbon oil atthe stated concentration
Each Wear Metal Standard contains12 elements in hydrocarbon oil atthe stated concentration
Each Wear Metal Standard contains20 elements in hydrocarbon oil atthe stated concentration
Each Wear Metal Standard contains21 elements in hydrocarbon oil atthe stated concentration
Conc. Cat. No. Price(µg/g)
10 WM-11-NMS-1X-1 $ 13030 WM-11-NMS-3X-1 13050 WM-11-NMS-5X-1 130100 WM-11-NMS-10X-1 140300 WM-11-NMS-30X-1 165500 WM-11-NMS-50X-1 245900 WM-11-NMS-90X-1 325
WM-11-NMS-SET-1 $ 1100set of above 7 x 100 mL
Conc. Cat. No. Price(µg/g)
10 WM-12-NMS-1X-1 $ 13530 WM-12-NMS-3X-1 13550 WM-12-NMS-5X-1 135100 WM-12-NMS-10X-1 145300 WM-12-NMS-30X-1 170500 WM-12-NMS-50X-1 250
WM-12-NMS-SET-1 $ 850set of above 6 x 100 mL
Conc. Cat. No. Price(µg/g)
10 WM-21-NMS-1X-1 $ 16030 WM-21-NMS-3X-1 16050 WM-21-NMS-5X-1 160100 WM-21-NMS-10X-1 180300 WM-21-NMS-30X-1 240500 WM-21-NMS-50X-1 350
WM-21-NMS-SET-1 $ 1050set of above 6 x 100 mL
Conc. Cat. No. Price(µg/g)
10 WM-20-NMS-1X-1 $ 15030 WM-20-NMS-3X-1 15050 WM-20-NMS-5X-1 150100 WM-20-NMS-10X-1 170300 WM-20-NMS-30X-1 230500 WM-20-NMS-50X-1 350900 WM-20-NMS-90X-1 500
WM-20-NMS-SET-1 $ 1450set of above 7 x 100 mL
ISO/CD 14597Vanadium and Nickel Standards with Manganese Internal Standard for ISO/CD 14597
Internal StandardASTM-P-0107-5 $ 235 / 500 mL
Manganese @ 0.05 Wt. % in Xylene-Mineral Oil
Vanadium Standards - High Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0105-SET $ 780 / 7 x 100 mL
Vanadium PriceCat. No. Conc. (Wt.%) 100 mL
ASTM-P-0105-01 0.0000 $ 135ASTM-P-0105-02 0.0300 135ASTM-P-0105-03 0.0400 135ASTM-P-0105-04 0.0500 135ASTM-P-0105-05 0.0600 135ASTM-P-0105-06 0.0800 135ASTM-P-0105-07 0.1000 135
Vanadium Standards - Low Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0104-SET $ 1050 / 9 x 100 mL
Vanadium PriceCat. No. Conc. (Wt.%) 100 mL
ASTM-P-0104-01 0.0005 $ 150ASTM-P-0104-02 0.0025 150ASTM-P-0104-03 0.0050 150ASTM-P-0104-04 0.0075 150ASTM-P-0104-05 0.0100 150ASTM-P-0104-06 0.0125 150ASTM-P-0104-07 0.0150 150ASTM-P-0104-08 0.0175 150ASTM-P-0104-09 0.0200 150
62 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ORGA
NOME
TALL
ICC
Sulfur & Metals in Oil
Sulfur and Metals in Mineral OilASTM-P-0100-SET $ 1650 / 12 x 100 mL
Sulfur Nickel VanadiumCat. No. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) 100 mL
ASTM-P-0100-01 0.00 0 0 $ 200ASTM-P-0100-02 0.50 10 500 200ASTM-P-0100-03 1.00 100 25 200ASTM-P-0100-04 1.50 80 250 200ASTM-P-0100-05 2.00 40 100 200ASTM-P-0100-06 2.50 5 400 200ASTM-P-0100-07 3.00 60 300 200ASTM-P-0100-08 3.50 0 200 200ASTM-P-0100-09 4.00 100 0 200ASTM-P-0100-10 4.50 50 250 200ASTM-P-0100-11 5.00 20 500 200ASTM-P-0100-12 5.50 100 50 200
Sulfur and Metals in Mineral OilASTM-P-0102-SET $ 1850 / 12 x 100 mL
Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 ----- 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 ----- 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200
Sulfur and Metals in Residual Fuel OilASTM-P-0101-SET $ 1800 / 12 x 100 mL
Sulfur Nickel VanadiumCat. No. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) 100 mL
ASTM-P-0101-01 0.00 0 0 $ 200ASTM-P-0101-02 0.50 10 500 200ASTM-P-0101-03 1.00 100 25 200ASTM-P-0101-04 1.50 80 250 200ASTM-P-0101-05 2.00 40 100 200ASTM-P-0101-06 2.50 5 400 200ASTM-P-0101-07 3.00 60 300 200ASTM-P-0101-08 3.50 0 200 200ASTM-P-0101-09 4.00 100 0 200ASTM-P-0101-10 4.50 50 250 200ASTM-P-0101-11 5.00 20 500 200ASTM-P-0101-12 5.50 100 50 200
Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET $ 2100 / 12 x 100 mL
Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 ----- 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 ----- 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200
Designed for
ASTM D-5708-95aDesigned for
ASTM D-5708-95a
Nickel Standards for ISO/CD 14597 with 0.05%Manganese Internal Standard in Xylene-Mineral Oil
ASTM-P-0106-SET $ 780 / 7 x 100 mL
Nickel PriceCat. No. Conc. (Wt.%) 100 mL
ASTM-P-0106-01 0.0000 $ 135ASTM-P-0106-02 0.0005 135ASTM-P-0106-03 0.0010 135ASTM-P-0106-04 0.0025 135ASTM-P-0106-05 0.0050 135ASTM-P-0106-06 0.0075 135ASTM-P-0106-07 0.0100 135
Organometallic Standardsfor AA, ICP, DCP & XRF Analysis
Wear Metals
Concentration for the sets on pages 62-65 are targets. Actual production lots may vary.
Technical Note
63Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ORGANOMETALLICC
Lubricating Oil StandardsDesigned for
ASTM D-6481-99
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0113-SET $ 2850 / 17 x 100 mL
Ba Ca Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0109-SET $ 1600 / 17 x 100 mL
Standard Ca Cl P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0109-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0109-02 0.500 0.000 0.200 0.050 0.080ASTM-P-0109-03 0.400 0.010 0.150 0.300 0.180ASTM-P-0109-04 0.260 0.500 0.250 0.150 0.120ASTM-P-0109-05 0.005 1.000 0.005 0.450 0.070ASTM-P-0109-06 0.400 0.400 0.025 0.350 0.100ASTM-P-0109-07 0.300 0.100 0.060 0.250 0.120ASTM-P-0109-08 0.200 0.010 0.100 0.450 0.100ASTM-P-0109-09 0.060 0.050 0.080 0.300 0.130ASTM-P-0109-10 0.060 0.200 0.050 0.200 0.050ASTM-P-0109-11 0.050 0.500 0.120 0.100 0.075ASTM-P-0109-12 0.025 0.800 0.150 0.200 0.130ASTM-P-0109-13 0.005 1.000 0.200 0.400 0.150ASTM-P-0109-14 0.170 0.600 0.250 0.550 0.110ASTM-P-0109-15 0.100 0.200 0.100 0.200 0.200ASTM-P-0109-16 0.010 0.400 0.010 0.600 0.250ASTM-P-0109-17 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0108-SET $ 1900 / 17 x 100 mL
Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0108-01 0.600 0.005 0.175 0.060ASTM-P-0108-02 0.500 0.200 0.050 0.080ASTM-P-0108-03 0.400 0.150 0.300 0.180ASTM-P-0108-04 0.260 0.250 0.150 0.120ASTM-P-0108-05 0.005 0.005 0.450 0.070ASTM-P-0108-06 0.400 0.025 0.350 0.100ASTM-P-0108-07 0.300 0.060 0.250 0.120ASTM-P-0108-08 0.200 0.100 0.450 0.100ASTM-P-0108-09 0.060 0.080 0.300 0.130ASTM-P-0108-10 0.060 0.050 0.200 0.050ASTM-P-0108-11 0.050 0.120 0.100 0.075ASTM-P-0108-12 0.025 0.150 0.200 0.130ASTM-P-0108-13 0.005 0.200 0.400 0.150ASTM-P-0108-14 0.170 0.250 0.550 0.110ASTM-P-0108-15 0.100 0.100 0.200 0.200ASTM-P-0108-16 0.010 0.010 0.600 0.250ASTM-P-0108-17 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0111-SET $ 2800 / 17 x 100 mL
Ba Ca Cl P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0111-01 0.100 0.600 0.100 0.005 0.175 0.060ASTM-P-0111-02 0.175 0.500 0.000 0.200 0.050 0.080ASTM-P-0111-03 0.000 0.400 0.010 0.150 0.300 0.180ASTM-P-0111-04 0.025 0.260 0.500 0.250 0.150 0.120ASTM-P-0111-05 0.150 0.005 1.000 0.005 0.450 0.070ASTM-P-0111-06 0.000 0.400 0.400 0.025 0.350 0.100ASTM-P-0111-07 0.200 0.300 0.100 0.060 0.250 0.120ASTM-P-0111-08 0.000 0.200 0.010 0.100 0.450 0.100ASTM-P-0111-09 0.100 0.060 0.050 0.080 0.300 0.130ASTM-P-0111-10 0.050 0.060 0.200 0.050 0.200 0.050ASTM-P-0111-11 0.075 0.050 0.500 0.120 0.100 0.075ASTM-P-0111-12 0.010 0.025 0.800 0.150 0.200 0.130ASTM-P-0111-13 0.005 0.005 1.000 0.200 0.400 0.150ASTM-P-0111-14 0.000 0.170 0.600 0.250 0.550 0.110ASTM-P-0111-15 0.000 0.100 0.200 0.100 0.200 0.200ASTM-P-0111-16 0.005 0.010 0.400 0.010 0.600 0.250ASTM-P-0111-17 0.000 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0110-SET $ 2300 / 17 x 100 mL
Ba Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0112-SET $ 2300 / 16 x 100 mL
Ca Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0112-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0112-02 0.500 0.150 0.200 0.050 0.080ASTM-P-0112-03 0.400 0.350 0.150 0.300 0.180ASTM-P-0112-04 0.260 0.225 0.250 0.150 0.120ASTM-P-0112-05 0.005 0.450 0.005 0.450 0.070ASTM-P-0112-06 0.400 0.500 0.025 0.350 0.100ASTM-P-0112-07 0.300 0.325 0.060 0.250 0.120ASTM-P-0112-08 0.200 0.250 0.100 0.450 0.100ASTM-P-0112-09 0.060 0.100 0.080 0.300 0.130ASTM-P-0112-10 0.060 0.400 0.050 0.200 0.050ASTM-P-0112-11 0.050 0.300 0.120 0.100 0.075ASTM-P-0112-12 0.025 0.200 0.150 0.200 0.130ASTM-P-0112-13 0.005 0.375 0.200 0.400 0.150ASTM-P-0112-14 0.170 0.175 0.250 0.550 0.110ASTM-P-0112-15 0.100 0.425 0.100 0.200 0.200ASTM-P-0112-16 0.010 0.275 0.010 0.600 0.250ASTM-P-0112-17 0.000 0.000 0.000 0.000 0.000
Designed for
ASTM D-4927-96Designed for
ASTM D-4927-96
Designed for ASTM
D-4628-97 & D-4927-96
Organometallic Standardsfor AA, ICP, DCP & XRF Analysis
Wear MetalsW
EAR METALS
Lubricating Oil Standards Continued
Organometallic Standards forAA, ICP, DCP & XRF Analysis
Lubricating Oil, Additives Wt.% (Nominal Value) listed belowASTM-P-0116-SET $ 2450 / 11 x 100 mL
Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0116-01 0.500 1.000 0.500 0.500ASTM-P-0116-02 3.000 1.000 3.000 2.000ASTM-P-0116-03 2.000 1.250 1.000 1.500ASTM-P-0116-04 5.000 1.500 0.500 1.200ASTM-P-0116-05 4.000 0.500 1.500 0.750ASTM-P-0116-06 2.500 0.750 4.000 1.000ASTM-P-0116-07 4.000 0.500 2.000 1.250ASTM-P-0116-08 0.500 2.000 5.000 1.000ASTM-P-0116-09 1.000 0.750 2.000 1.500ASTM-P-0116-10 2.500 1.200 3.000 0.500ASTM-P-0116-11 0.000 0.000 0.000 0.000
Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed belowASTM-P-0118-SET $ 2400 / 10 x 100 mL
Ba Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0118-01 0.020 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0118-02 0.250 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0118-03 0.020 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0118-04 0.250 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0118-05 0.020 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0118-06 0.250 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0118-07 0.020 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0118-08 0.250 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0118-09 0.130 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0118-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed belowASTM-P-0117-SET $ 2100 / 10 x 100 mL
Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0115-SET $ 2300 / 17 x 100 mL
Ca P S Zn MgCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0115-01 0.005 0.005 0.050 0.050 0.100ASTM-P-0115-02 0.600 0.000 0.000 0.000 0.150ASTM-P-0115-03 0.000 0.300 0.000 0.000 0.350ASTM-P-0115-04 1.000 0.000 1.000 0.000 .0225ASTM-P-0115-05 0.000 0.000 0.000 0.300 0.450ASTM-P-0115-06 0.005 0.250 0.800 0.300 0.500ASTM-P-0115-07 0.500 0.150 0.500 0.150 0.325ASTM-P-0115-08 0.010 0.200 0.100 0.250 0.250ASTM-P-0115-09 0.050 0.010 0.400 0.075 0.050ASTM-P-0115-10 0.100 0.150 0.200 0.200 0.400ASTM-P-0115-11 0.200 0.200 0.800 0.100 0.300ASTM-P-0115-12 0.400 0.005 0.800 0.300 0.200ASTM-P-0115-13 0.600 0.100 0.500 0.050 0.375ASTM-P-0115-14 0.800 0.010 0.050 0.100 0.175ASTM-P-0115-15 1.000 0.300 1.000 .0150 0.425ASTM-P-0115-16 0.400 0.050 0.600 0.250 0.275ASTM-P-0115-17 0.000 0.000 0.000 0.000 0.000
64 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ORGA
NOME
TALL
ICC
Designed for
ASTM D-6481-99
Designed for
ASTM D-6443-99
Designed for ASTM
D-4628-97, D-4927-96
D-4951-96, D-6443-99
Wear Metals
Lubricating Oil, Elements, EDXRF ASTM MethodWt.% (Nominal Value) listed belowASTM-P-0114-SET $ 1900 / 17 x 100 mL
Ca P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0114-01 0.005 0.005 0.050 0.050ASTM-P-0114-02 0.600 0.000 0.000 0.000ASTM-P-0114-03 0.000 0.300 0.000 0.000ASTM-P-0114-04 1.000 0.000 1.000 0.000ASTM-P-0114-05 0.000 0.000 0.000 0.300ASTM-P-0114-06 0.005 0.250 0.800 0.300ASTM-P-0114-07 0.500 0.150 0.500 0.150ASTM-P-0114-08 0.010 0.200 0.100 0.250ASTM-P-0114-09 0.050 0.010 0.400 0.075ASTM-P-0114-10 0.100 0.150 0.200 0.200ASTM-P-0114-11 0.200 0.200 0.800 0.100ASTM-P-0114-12 0.400 0.005 0.800 0.300ASTM-P-0114-13 0.600 0.100 0.500 0.050ASTM-P-0114-14 0.800 0.010 0.050 0.100ASTM-P-0114-15 1.000 0.300 1.000 0.150ASTM-P-0114-16 0.400 0.050 0.600 0.250ASTM-P-0114-17 0.000 0.000 0.000 0.000
WEA
R M
ETAL
S
Lubricating Oil Standards Continued
65Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ORGANOMETALLICC
Organometallic Standards forAA, ICP, DCP & XRF Analysis
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0119-SET $ 2900 / 22 x 100 mL
Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0119-01 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0119-02 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0119-03 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0119-04 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0119-05 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0119-06 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0119-07 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0119-08 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0119-09 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0119-10 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0119-11 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0119-12 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0119-13 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0119-14 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0119-15 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0119-16 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0119-17 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0119-18 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0119-19 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0119-20 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0119-21 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0119-22 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements Wt.% (Nominal Value) listed belowASTM-P-0120-SET $ 3100 / 23 x 100 mL
Ba Ca Cl Cu Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0120-01 0.100 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0120-02 0.175 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0120-03 0.040 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0120-04 0.020 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0120-05 0.150 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0120-06 0.000 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0120-07 0.200 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0120-08 0.000 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0120-09 0.000 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0120-10 0.000 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0120-11 0.100 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-12 0.050 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0120-13 0.000 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0120-14 0.080 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0120-15 0.010 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0120-16 0.000 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0120-17 0.000 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0120-18 0.000 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0120-19 0.150 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0120-20 0.005 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0120-21 0.100 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0120-22 0.120 0.200 0.000 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-23 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
65Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
Designed for ASTM
D-4628-97, D-4927-96
D-4951-96, D-6443-99
Stabilization SolutionsMetal Working FluidsMetal Working Fluid Wt.% (Nominal Value) listed belowASTM-P-0121-SET $ 1300 / 13 x 100 mL
Standard Cl P SNo. (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0121-01 0.000 0.000 0.000ASTM-P-0121-02 0.750 0.025 0.500ASTM-P-0121-03 0.050 0.100 3.000ASTM-P-0121-04 1.000 0.500 2.500ASTM-P-0121-05 0.100 0.005 2.000ASTM-P-0121-06 1.500 0.200 1.000ASTM-P-0121-07 2.000 0.005 3.000ASTM-P-0121-08 1.000 0.050 0.100ASTM-P-0121-09 0.500 0.400 0.000ASTM-P-0121-10 2.000 0.200 1.500ASTM-P-0121-11 0.000 0.500 1.500ASTM-P-0121-12 1.250 0.010 0.050ASTM-P-0121-13 0.050 0.300 0.050
Wear Metals
The solutions were specificallydesigned for chelating andsolubilizing the organometallic lineof solids and solutions for singleand multi-element standards.
Stabilizer Solutions AASTM-P-0122-0.5 $ 80 / 50 mLASTM-P-0122-1 $ 120 / 100 mL
Stabilizer Solutions BASTM-P-0123-0.5 $ 80 / 50 mLASTM-P-0123-1 $ 120 / 100 mL(use in conjunction with stabilizer solution A)
Concentration for the sets on pages62-65 are targets. Actual productionlots may vary.
Technical Note
Organo Tin Analysis Sample Extraction, Derivatization & Cleanup with Analysis by Flame-Photometric Detector
Proposed ASTM Method Trace Metals Phosphorous, Sulfur, Calcium, & Zinc in Lubrication Oils by XRF
66 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ORGA
NOME
TALL
ICC
Butyltin Chloride StandardOMT-001 $ 40 / 1 x 1 mLOMT-001-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH2Cl2 4 comps.
The Organo Tin standards shown below were developed in response to concerns about Organo Tin as an endocrine disrupter. Organo Tincompounds such as Tributyl Tin were used as marine antifouling agents and Triphenyl Tin as a crop pesticide.
Tetrapentyltin ChlorideInternal StandardOMT-006 $ 30 / 1 x 1 mLOMT-006-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH2Cl2
Tetrapentyltin chloride
Tetra-n-propyltin chlorideInternal StandardOMT-005 $ 40 / 1 x 1 mLOMT-005-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL in CH2Cl2
Tetra-n-propyl tin chloride
Tripentyltin ChlorideSurrogate StandardOMT-004 $ 30 / 1 x 1 mLOMT-004-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH2Cl2
Tripentyltin chloride
Tri-n-propyltin ChlorideSurrogate StandardOMT-003 $ 30 / 1 x 1 mLOMT-003-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL in CH2Cl2
Tri-n-propyltin chloride
TetraphenyltinTriphenyltin chloride
Diphenyltin dichloridePhenyltin trichloride
TetrabutyltinTributyltin chloride
Butyltin trichlorideDibutyltin dichloride
Phenyltin Chloride StandardOMT-002 $ 40 / 1 x 1 mLOMT-002-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH2Cl2 4 comps.
Petrochemical Standards
Cat. No. Calcium Phosphorus Sulfur Zinc Unit PriceWt.% Wt.% Wt.% Wt.%
ASTM-P-0090-01 0 0 0 0 4 oz. $ 200ASTM-P-0090-02 0 0.02 0.3 0.175 4 oz. 200ASTM-P-0090-03 0.005 0 0.55 0.14 4 oz. 200ASTM-P-0090-04 0.025 0.175 0.35 0.1 4 oz. 200ASTM-P-0090-05 0.05 0.15 0.2 0.2 4 oz. 200ASTM-P-0090-06 0.075 0.225 0.5 0.15 4 oz. 200ASTM-P-0090-07 0.1 0.01 0.45 0.25 4 oz. 200ASTM-P-0090-08 0.1 0.125 0.6 0.06 4 oz. 200ASTM-P-0090-09 0.15 0.1 0.25 0.089 4 oz. 200ASTM-P-0090-10 0.2 0.008 0.075 0.12 4 oz. 200ASTM-P-0090-11 0.25 0.05 0.125 0 4 oz. 200ASTM-P-0090-12 0.3 0.06 0.1 0.13 4 oz. 200ASTM-P-0090-13 0.35 0.004 0.4 0.11 4 oz. 200ASTM-P-0090-14 0.4 0.2 0.175 0.05 4 oz. 200ASTM-P-0090-15 0.5 0.03 0.15 0.07 4 oz. 200ASTM-P-0090-16 0.6 0.005 0.05 0.08 4 oz. 200
Proposed ASTM Method for Chlorine in Lube Oils Chlorine in Lube Oils
Wear Metals
ASTM-P-0090-SET $ 1600 / 16 x 4 oz.
ASTM-P-0092-SET $ 400 / 7 x 4 oz.
Cat. No. Chlorine Chlorine Unit PriceWt. % µg/g
ASTM-P-0092-BL Blank Blank 4 oz. $ 10ASTM-P-0092-0.1X 0.001 10 4 oz. 75ASTM-P-0092-1X 0.01 100 4 oz. 75ASTM-P-0092-5X 0.05 500 4 oz. 75ASTM-P-0092-10X 0.1 1,000 4 oz. 75ASTM-P-0092-100X 1 10,000 4 oz. 75ASTM-P-0092-500X 5 50,000 4 oz. 75
67Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
Inorganic Standards
Used for influent and effluent monitoring in aqueous matrices by ASTM and other EPA Methods inthe Petrochemical Industry.
• Formulated from High Purity Starting Materials, Water & Acids• Concentration verified by Wet Chemical & Instrumental Analysis• Certificate of Analysis provided with each Standard• Actual Lot Analysis provided on label & Certificate of Analysis• Packaged in specially prepared pre-cleaned bottles• 18 Month Stability Dating
Stop Paying Hazardous Shipping Fees!AccuNoHaz
All NoHaz products come as kits including20 mL of concentrate, pre-cleaned and pre-
labeled dilution bottle, instructions andCertificate of Analysis
ICP69 elements at 10K µg/mL &59 elements at 25K µg/mL
see pages 68-71
AA69 elements at 10K µg/mL &59 elements at 25K µg/mL
see pages 73-75
EmptyPre-Washed500 mLBottle
20 mLConcentrate
HAZFEE
20 mL meets the Excepted Quantity rule under DOT & IATA regulations whichdo not require hazardous shipping fees.
Traceable to NIST Reference Materials
Inorganic PetrochemicalReference Standards
pageICP 68-71IPC/MS 72AA 73-75Ion Chrom 76-79
ICP, ICP/MS, AA, Ion Chrom
INOINORGANIC
68 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICP
ElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. Price
Aluminum 20 mL ------ -- ------ -- ICP-01N-10X-20ML $ 37 ICP-01N-25X-20ML $ 70Al(NO3)3 • 9H2O 50 mL ------ -- ICP-01N-0.5-10X $ 34 ------ -- ------ --2-5% Nitric acid 100 mL ICP-01N-1 $ 34 ICP-01N-1-10X 59 ------ -- ------ --
500 mL ICP-01N-5 67 ICP-01N-5-10X 175 ------ -- ------ --Antimony 20 mL ------ -- ------ -- ICP-02N-10X-20ML 37 ------ --Sb 50 mL ------ -- ICP-02N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-02N-1 34 ICP-02N-1-10X 65 ------ -- ------ --
500 mL ICP-02N-5 67 ICP-02N-5-10X 135 ------ -- ------ --Arsenic 20 mL ------ -- ------ -- ICP-03N-10X-20ML 37 ICP-03N-25X-20ML 70As 50 mL ------ -- ICP-03N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-03N-1 34 ICP-03N-1-10X 54 ------ -- ------ --
500 mL ICP-03N-5 67 ICP-03N-5-10X 120 ------ -- ------ --Barium 20 mL ------ -- ------ -- ICP-04N-10X-20ML 37 ICP-04N-25X-20ML 70Ba(NO3)2 50 mL ------ -- ICP-04N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-04N-1 34 ICP-04N-1-10X 54 ------ -- ------ --
500 mL ICP-04N-5 67 ICP-04N-5-10X 120 ------ -- ------ --Beryllium 20 mL ------ -- ------ -- ICP-05N-10X-20ML 37 ------ --BeO(C2H3O2)6 50 mL ------ -- ICP-05N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-05N-1 34 ICP-05N-1-10X 54 ------ -- ------ --
500 mL ICP-05N-5 67 ICP-05N-5-10X 240 ------ -- ------ --Bismuth 20 mL ------ -- ------ -- ICP-06N-10X-20ML 37 ICP-06N-25X-20ML 70Bi 50 mL ------ -- ICP-06N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-06N-1 34 ICP-06N-1-10X 65 ------ -- ------ --
500 mL ICP-06N-5 67 ICP-06N-5-10X 135 ------ -- ------ --Boron 20 mL ------ -- ------ -- ICP-07W-10X-20ML 37 ------ --H3BO3 50 mL ------ -- ICP-07W-0.5-10X 32 ------ -- ------ --Water tr. NH4OH 100 mL ICP-07W-1 34 ICP-07W-1-10X 54 ------ -- ------ --
500 mL ICP-07W-5 67 ICP-07W-5-10X 120 ------ -- ------ --Cadmium 20 mL ------ -- ------ -- ICP-08N-10X-20ML 37 ICP-08N-25X-20ML 70Cd 50 mL ------ -- ICP-08N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-08N-1 34 ICP-08N-1-10X 54 ------ -- ------ --
500 mL ICP-08N-5 67 ICP-08N-5-10X 120 ------ -- ------ --Calcium 20 mL ------ -- ------ -- ICP-09N-10X-20ML 37 ICP-09N-25X-20ML 70CaCO3 50 mL ------ -- ICP-09N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-09N-1 34 ICP-09N-1-10X 54 ------ -- ------ --
500 mL ICP-09N-5 67 ICP-09N-5-10X 120 ------ -- ------ --Cerium 20 mL ------ -- ------ -- ICP-11N-10X-20ML 37 ICP-11N-25X-20ML 80Ce(NO3)3 50 mL ------ -- ICP-11N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-11N-1 34 ICP-11N-1-10X 54 ------ -- ------ --
500 mL ICP-11N-5 67 ICP-11N-5-10X 168 ------ -- ------ --Cesium 20 mL ------ -- ------ -- ICP-12N-10X-20ML 55 ICP-12N-25X-20ML 100CsNO3 50 mL ------ -- ICP-12N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-12N-1 42 ICP-12N-1-10X 75 ------ -- ------ --
500 mL ICP-12N-5 82 ICP-12N-5-10X 231 ------ -- ------ --Chromium 20 mL ------ -- ------ -- ICP-13N-10X-20ML 37 ICP-13N-25X-20ML 70reduced to (+3) state 50 mL ------ -- ICP-13N-0.5-10X 34 ------ -- ------ --
(NH4)2Cr2O7 100 mL ICP-13N-1 34 ICP-13N-1-10X 59 ------ -- ------ --2-5% Nitric acid 500 mL ICP-13N-5 67 ICP-13N-5-10X 125 ------ -- ------ --Chromium 50 mL -------------- ICP-13H-0.5-10X 34 ICP-13H-0.5-10X 34 ------ --reduced to (+3) state 100 mL ICP-13H-1 34 ICP-13H-1-10X 59 ------ -- ------ --
Cr 500 mL ICP-13H-5 67 ICP-13H-5-10X 125 ------ -- ------ --2-5% Nitric acidCobalt 20 mL ------ -- ------ -- ICP-14N-10X-20ML 37 ICP-14N-25X-20ML 70Co 50 mL ------ -- ICP-14N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-14N-1 34 ICP-14N-1-10X 54 ------ -- ------ --
500 mL ICP-14N-5 67 ICP-14N-5-10X 168 ------ -- ------ --Copper 20 mL ------ -- ------ -- ICP-15N-10X-20ML 37 ICP-15N-25X-20ML 70Cu 50 mL ------ -- ICP-15N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-15N-1 34 ICP-15N-1-10X 54 ------ -- ------ --
500 mL ICP-15N-5 67 ICP-15N-5-10X 120 ------ -- ------ --Dysprosium 20 mL ------ -- ------ -- ICP-16N-10X-20ML 55 ICP-16N-25X-20ML 100Dy2O3 50 mL ------ -- ICP-16N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-16N-1 42 ICP-16N-1-10X 75 ------ -- ------ --
500 mL ICP-16N-5 82 ICP-16N-5-10X 231 ------ -- ------ --Erbium 20 mL ------ -- ------ -- ICP-17N-10X-20ML 55 ICP-17N-25X-20ML 100Er2O3 50 mL ------ -- ICP-17N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-17N-1 42 ICP-17N-1-10X 85 ------ -- ------ --
500 mL ICP-17N-5 82 ICP-17N-5-10X 259 ------ -- ------ --Europium 20 mL ------ -- ------ -- ICP-18N-10X-20ML 55 ICP-18N-25X-20ML 100Eu2O3 50 mL ------ -- ICP-18N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-18N-1 42 ICP-18N-1-10X 85 ------ -- ------ --
500 mL ICP-18N-5 82 ICP-18N-5-10X 185 ------ -- ------ --Gadolinium 20 mL ------ -- ------ -- ICP-19N-10X-20ML 55 ICP-19N-25X-20ML 100Gd2O3 50 mL ------ -- ICP-19N-0.5-10X 69 ------ -- ------ --2-5% Nitric acid 100 mL ICP-19N-1 42 ICP-19N-1-10X 115 ------ -- ------ --
500 mL ICP-19N-5 82 ICP-19N-5-10X 315 ------ -- ------ --
ICP Single Element StandardsPlasma Emission Spectroscopy
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
69Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ICP ICP Single Element Standards
Plasma Emission Spectroscopy
* see page 67 for details
ElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
Gallium 20 mL ------ -- ------ -- ICP-20N-10X-20ML $ 55 ------ --Ga 50 mL ------ -- ICP-20N-0.5-10X $ 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-20N-1 $ 42 ICP-20N-1-10X 75 ------ -- ------ --
500 mL ICP-20N-5 82 ICP-20N-5-10X 165 ------ -- ------ --Germanium 20 mL ------ -- ------ -- ICP-21W-10X-20ML 55 ------ --(NH4)2GeF6 50 mL ------ -- ICP-21W-0.5-10X 52 ------ -- ------ --Water tr. HF 100 mL ICP-21W-1 42 ICP-21W-1-10X 85 ------ -- ------ --
500 mL ICP-21W-5 82 ICP-21W-5-10X 231 ------ -- ------ --Gold 20 mL ------ -- ------ -- ICP-22H-10X-20ML 95 ICP-22H-25X-20ML $ 165Au 50 mL ------ -- ICP-22H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-22H-1 78 ICP-22H-1-10X 295 ------ -- ------ --
500 mL ICP-22H-5 152 ICP-22H-5-10X 695 ------ -- ------ --Hafnium 20 mL ------ -- ------ -- ICP-23N-10X-20ML 75 ICP-23N-25X-20ML 135HfO2 50 mL ------ -- ICP-23N-0.5-10X 80 ------ -- ------ --2-5% Nitric acid tr. HF 100 mL ICP-23N-1 60 ICP-23N-1-10X 135 ------ -- ------ --
500 mL ICP-23N-5 118 ICP-23N-5-10X 364 ------ -- ------ --Holmium 20 mL ------ -- ------ -- ICP-24N-10X-20ML 55 ICP-24N-25X-20ML 100Ho2O3 50 mL ------ -- ICP-24N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-24N-1 42 ICP-24N-1-10X 85 ------ -- ------ --
500 mL ICP-24N-5 82 ICP-24N-5-10X 259 ------ -- ------ --Indium 20 mL ------ -- ------ -- ICP-25N-10X-20ML 55 ICP-25N-25X-20ML 100In 50 mL ------ -- ICP-25N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-25N-1 42 ICP-25N-1-10X 85 ------ -- ------ --
500 mL ICP-25N-5 82 ICP-25N-5-10X 185 ------ -- ------ --Iridium 20 mL ------ -- ------ -- ICP-26H-10X-20ML 95 ICP-26H-25X-20ML 175IrCl3 • 3H20 50 mL ------ -- ICP-26H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-26H-1 78 ICP-26H-1-10X 295 ------ -- ------ --
500 mL ICP-26H-5 152 ICP-26H-5-10X 695 ------ -- ------ --Iron 20 mL ------ -- ------ -- ICP-27N-10X-20ML 37 ICP-27N-25X-20ML 70Fe 50 mL ------ -- ICP-27N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-27N-1 34 ICP-27N-1-10X 54 ------ -- ------ --
500 mL ICP-27N-5 67 ICP-27N-5-10X 120 ------ -- ------ --Lanthanum 20 mL ------ -- ------ -- ICP-28N-10X-20ML 37 ICP-28N-25X-20ML 80La2O3 50 mL ------ -- ICP-28N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-28N-1 34 ICP-28N-1-10X 54 ------ -- ------ --
500 mL ICP-28N-5 67 ICP-28N-5-10X 168 ------ -- ------ --Lead 20 mL ------ -- ------ -- ICP-29N-10X-20ML 37 ICP-29N-25X-20ML 70Pb(NO3)2 50 mL ------ -- ICP-29N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-29N-1 34 ICP-29N-1-10X 54 ------ -- ------ --
500 mL ICP-29N-5 67 ICP-29N-5-10X 168 ------ -- ------ --Lithium 20 mL ------ -- ------ -- ICP-30N-10X-20ML 37 ICP-30N-25X-20ML 70Li2CO3 50 mL ------ -- ICP-30N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-30N-1 34 ICP-30N-1-10X 54 ------ -- ------ --
500 mL ICP-30N-5 67 ICP-30N-5-10X 120 ------ -- ------ --Lutetium 20 mL ------ -- ------ -- ICP-31N-10X-20ML 90 ICP-31N-25X-20ML 300Lu2O3 50 mL ------ -- ICP-31N-0.5-10X 175 ------ -- ------ --2-5% Nitric acid 100 mL ICP-31N-1 75 ICP-31N-1-10X 295 ------ -- ------ --
500 mL ICP-31N-5 285 ICP-31N-5-10X 1393 ------ -- ------ --Magnesium 20 mL ------ -- ------ -- ICP-32N-10X-20ML 37 ICP-32N-25X-20ML 70MgO 50 mL ------ -- ICP-32N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-32N-1 34 ICP-32N-1-10X 54 ------ -- ------ --
500 mL ICP-32N-5 67 ICP-32N-5-10X 120 ------ -- ------ --Manganese 20 mL ------ -- ------ -- ICP-33N-10X-20ML 37 ICP-33N-25X-20ML 70Mn(C2H3O2)2 50 mL ------ -- ICP-33N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-33N-1 34 ICP-33N-1-10X 54 ------ -- ------ --
500 mL ICP-33N-5 67 ICP-33N-5-10X 168 ------ -- ------ --Mercury 20 mL ------ -- ------ -- ICP-34N-10X-20ML 37 ICP-34N-25X-20ML 70Hg 50 mL ------ -- ICP-34N-0.5-10X 32 ------ -- ------ --10% Nitric acid 100 mL ICP-34N-1 34 ICP-34N-1-10X 54 ------ -- ------ --
500 mL ICP-34N-5 67 ICP-34N-5-10X 120 ------ -- ------ --Molybdenum 20 mL ------ -- ------ -- ICP-35W-10X-20ML 37 ICP-35W-25X-20ML 70(NH4)2MoO4 50 mL ------ -- ICP-35W-0.5-10X 32 ------ -- ------ --Water tr. NH4OH 100 mL ICP-35W-1 34 ICP-35W-1-10X 54 ------ -- ------ --
500 mL ICP-35W-5 67 ICP-35W-5-10 120 ------ -- ------ --Neodymium 20 mL ------ -- ------ -- ICP-36N-10X-20ML 37 ICP-36N-25X-20ML 80Nd2O3 50 mL ------ -- ICP-36N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-36N-1 34 ICP-36N-1-10X 75 ------ -- ------ --
500 mL ICP-36N-5 67 ICP-36N-5-10X 203 ------ -- ------ --Nickel 20 mL ------ -- ------ -- ICP-37N-10X-20ML 37 ICP-37N-25X-20ML 70Ni 50 mL ------ -- ICP-37N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-37N-1 34 ICP-37N-1-10X 54 ------ -- ------ --
500 mL ICP-37N-5 67 ICP-37N-5-10X 120 ------ -- ------ --
Single Element Standards for Plasma Emission Spectroscopy Continued on Next Page
70 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICP
ICP Single Element StandardsPlasma Emission Spectoscopy
ElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
Niobium 20 mL ------ -- ------ -- ICP-38W-10X-20ML $ 37 ICP-38W-25X-20ML $ 80Nb2O5 50 mL ------ -- ICP-38W-0.5-10X $ 38 ------ -- ------ --Water tr. HF 100 mL ICP-38W-1 $ 34 ICP-38W-1-10X 64 ------ -- ------ --
500 mL ICP-38W-5 67 ICP-38W-5-10X 175 ------ -- ------ --Palladium 20 mL ------ -- ------ -- ICP-40H-10X-20ML 95 ICP-40H-25X-20ML 165Pd 50 mL ------ -- ICP-40H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-40H-1 78 ICP-40H-1-10X 295 ------ -- ------ --
500 mL ICP-40H-5 152 ICP-40H-5-10X 973 ------ -- ------ --Phosphorus 20 mL ------ -- ------ -- ICP-41W-10X-20ML 37 ------ --NH4H2PO4 50 mL ------ -- ICP-41W-0.5-10X 32 ------ -- ------ --Water 100 mL ICP-41W-1 34 ICP-41W-1-10X 54 ------ -- ------ --
500 mL ICP-41W-5 67 ICP-41W-5-10X 120 ------ -- ------ --Platinum 20 mL ------ -- ------ -- ICP-42H-10X-20ML 95 ICP-42H-25X-20ML 165Pt 50 mL ------ -- ICP-42H-0.5-10X 175 ------ -- ------ --10% HCl (min.) 100 mL ICP-42H-1 78 ICP-42H-1-10X 295 ------ -- ------ --
500 mL ICP-42H-5 152 ICP-42H-5-10X 695 ------ -- ------ --Potassium 20 mL ------ -- ------ -- ICP-43N-10X-20ML 37 ICP-43N-25X-20ML 70KNO3 50 mL ------ -- ICP-43N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-43N-1 34 ICP-43N-1-10X 54 ------ -- ------ --
500 mL ICP-43N-5 67 ICP-43N-5-10X 120 ------ -- ------ --Praseodymium 20 mL ------ -- ------ -- ICP-44N-10X-20ML 55 ICP-44N-25X-20ML 100Pr6O11 50 mL ------ -- ICP-44N-0.5-10X 72 ------ -- ------ --2-5% Nitric acid 100 mL ICP-44N-1 42 ICP-44N-1-10X 120 ------ -- ------ --
500 mL ICP-44N-5 82 ICP-44N-5-10X 329 ------ -- ------ --Rhenium 20 mL ------ -- ------ -- ICP-45W-10X-20ML 95 ICP-45W-25X-20ML 175Re 50 mL ------ -- ICP-45W-0.5-10X 175 ------ -- ------ --Water 100 mL ICP-45W-1 78 ICP-45W-1-10X 295 ------ -- ------ --
500 mL ICP-45W-5 152 ICP-45W-5-10X 695 ------ -- ------ --Rhodium 20 mL ------ -- ------ -- ICP-46H-10X-20ML 250 ICP-46H-25X-20ML 475RhCl3 • 3H2O 50 mL ------ -- ICP-46H-0.5-10X 315 ------ -- ------ --10% HCl (min.) 100 mL ICP-46H-1 190 ICP-46H-1-10X 525 ------ -- ------ --
500 mL ICP-46H-5 425 ICP-46H-5-10X 2050 ------ -- ------ --Rubidium 20 mL ------ -- ------ -- ICP-47N-10X-20ML 37 ICP-47N-25X-20ML 80RbNO3 50 mL ------ -- ICP-47N-0.5-10X 52 ------ -- ------ --2-5% Nitric acid 100 mL ICP-47N-1 36 ICP-47N-1-10X 85 ------ -- ------ --
500 mL ICP-47N-5 70 ICP-47N-5-10X 175 ------ -- ------ --Ruthenium 20 mL ------ -- ------ -- ICP-48H-10X-20ML 95 ICP-48H-25X-20ML 185RuCl3 • 3H2O 50 mL ------ -- ICP-48H-0.5-10X 175 ------ -- ------ --10% HCl 100 mL ICP-48H-1 78 ICP-48H-1-10X 295 ------ -- ------ --
500 mL ICP-48H-5 152 ICP-48H-5-10X 695 ------ -- ------ --Samarium 20 mL ------ -- ------ -- ICP-49N-10X-20ML 55 ICP-49N-25X-20ML 100Sm2O3 50 mL ------ -- ICP-49N-0.5-10X 45 ------ -- ------ --2-5% Nitric acid 100 mL ICP-49N-1 42 ICP-49N-1-10X 75 ------ -- ------ --
500 mL ICP-49N-5 82 ICP-49N-5-10X 231 ------ -- ------ --Scandium 20 mL ------ -- ------ -- ICP-50N-10X-20ML 95 ICP-50N-25X-20ML 175Sc2O3 50 mL ------ -- ICP-50N-0.5-10X 175 ------ -- ------ --2-5% Nitric acid 100 mL ICP-50N-1 78 ICP-50N-1-10X 295 ------ -- ------ --
500 mL ICP-50N-5 152 ICP-50N-5-10X 973 ------ -- ------ --Selenium 20 mL ------ -- ------ -- ICP-51N-10X-20ML 37 ICP-51N-25X-20ML 70Se 50 mL ------ -- ICP-51N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-51N-1 34 ICP-51N-1-10X 54 ------ -- ------ --
500 mL ICP-51N-5 67 ICP-51N-5-10X 120 ------ -- ------ --Silicon 20 mL ------ -- ------ -- ICP-52W-10X-20ML 37 ------ --(NH4)2SiF6 50 mL ------ -- ICP-52W-0.5-10X 32 ------ -- ------ --Water tr. HF 100 mL ICP-52W-1 34 ICP-52W-1-10X 54 ------ -- ------ --
500 mL ICP-52W-5 67 ICP-52W-5-10X 168 ------ -- ------ --Silver 20 mL ------ -- ------ -- ICP-53N-10X-20ML 37 ICP-53N-25X-20ML 70AgNO3 50 mL ------ -- ICP-53N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-53N-1 34 ICP-53N-1-10X 70 ------ -- ------ --
500 mL ICP-53N-5 67 ICP-53N-5-10X 145 ------ -- ------ --Sodium 20 mL ------ -- ------ -- ICP-54N-10X-20ML 37 ICP-54N-25X-20ML 70NaNO3 50 mL ------ -- ICP-54N-0.5-10X 34 ------ -- ------ --2-5% Nitric acid 100 mL ICP-54N-1 34 ICP-54N-1-10X 59 ------ -- ------ --
500 mL ICP-54N-5 67 ICP-54N-5-10X 175 ------ -- ------ --Strontium 20 mL ------ -- ------ -- ICP-55N-10X-20ML 37 ICP-55N-25X-20ML 70Sr(NO3)2 50 mL ------ -- ICP-55N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-55N-1 34 ICP-55N-1-10X 70 ------ -- ------ --
500 mL ICP-55N-5 67 ICP-55N-5-10X 203 ------ -- ------ --Sulfur 20 mL ------ -- ------ -- ICP-56W-10X-20ML 37 ICP-56W-25X-20ML 70(NH4)2SO4 50 mL ------ -- ICP-56W-0.5-10X 32 ------ -- ------ --Water 100 mL ICP-56W-1 34 ICP-56W-1-10X 54 ------ -- ------ --
500 mL ICP-56W-5 67 ICP-56W-5-10X 120 ------ -- ------ --Tantalum 20 mL ------ -- ------ -- ICP-57W-10X-20ML 55 ICP-57W-25X-20ML 100Ta 50 mL ------ -- ICP-57W-0.5-10X 52 ------ -- ------ --Water tr. HF 100 mL ICP-57W-1 42 ICP-57W-1-10X 85 ------ -- ------ --
500 mL ICP-57W-5 82 ICP-57W-5-10X 224 ------ -- ------ --
71Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
ICP ICP Single Element Standards
Plasma Emission SpectroscopyElementStarting Mat'l 1000 µg/mL 10,000 µg/mLMatrix Unit Cat. No. Price Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
Tellurium 20 mL ------ -- ------ -- ICP-58H-10X-20ML $ 37 ------ --Te 50 mL ------ -- ICP-58H-0.5-10X $ 46 ------ -- ------ --10% HCl (min.) 100 mL ICP-58H-1 $ 34 ICP-58H-1-10X 78 ------ -- ------ --
500 mL ICP-58H-5 67 ICP-58H-5-10X 210 ------ -- ------ --Terbium 20 mL ------ -- ------ -- ICP-59N-10X-20ML 55 ICP-59N-25X-20ML $ 100Tb4O7 50 mL ------ -- ICP-59N-0.5-10X 69 ------ -- ------ --2-5% Nitric acid 100 mL ICP-59N-1 42 ICP-59N-1-10X 115 ------ -- ------ --
500 mL ICP-59N-5 82 ICP-59N-5-10X 315 ------ -- ------ --Thallium 20 mL ------ -- ------ -- ICP-60N-10X-20ML 37 ICP-60N-25X-20ML 70Tl 50 mL ------ -- ICP-60N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-60N-1 34 ICP-60N-1-10X 54 ------ -- ------ --
500 mL ICP-60N-5 67 ICP-60N-5-10X 125 ------ -- ------ --Thorium 100 mL ICP-61N-1 34 ------ -- ------ -- ------ --Th(NO3)4 • 4H2O 500 mL ICP-61N-5 67 ------ -- ------ -- ------ --2-5% Nitric acid
Thulium 20 mL ------ -- ------ -- ICP-62N-10X-20ML 75 ICP-62N-25X-20ML 135Tm2O3 50 mL ------ -- ICP-62N-0.5-10X 78 ------ -- ------ --2-5% Nitric acid 100 mL ICP-62N-1 58 ICP-62N-1-10X 130 ------ -- ------ --
500 mL ICP-62N-5 120 ICP-62N-5-10X 250 ------ -- ------ --Tin ------ -- ICP-63N-10X-20ML 37 ICP-63N-25X-20ML 70Sn 50 mL -------------- ICP-63N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid tr. HF 100 mL ICP-63N-1 34 ICP-63N-1-10X 70 ------ -- ------ --
500 mL ICP-63N-5 67 ICP-63N-5-10X 135 ------ -- ------ --Tin 50 mL -------------- ------ -- ICP-63H-0.5-10X 42 ------ --Sn 100 mL ICP-63H-1 34 ICP-63H-1-10X 70 ------ -- ------ --HCl 500 mL ICP-63H-5 67 ICP-63H-5-10X 135 ------ -- ------ --
Titanium 20 mL ------ -- ------ -- ICP-64W-10X-20ML 37 ------ --(NH4)2TiF6 50 mL ------ -- ICP-64W-0.5-10X 32 ------ -- ------ --Water tr. HF 100 mL ICP-64W-1 34 ICP-64W-1-10X 54 ------ -- ------ --
500 mL ICP-64W-5 67 ICP-64W-5-10X 120 ------ -- ------ --Tungsten 20 mL ------ -- ------ -- ICP-65W-10X-20ML 37 ------ --(NH4)2WO4 50 mL ------ -- ICP-65W-0.5-10X 32 ------ -- ------ --Water tr. NH4OH 100 mL ICP-65W-1 34 ICP-65W-1-10X 54 ------ -- ------ --
500 mL ICP-65W-5 67 ICP-65W-5-10X 168 ------ -- ------ --Uranium 50 mL ------ -- ------ -- ------ -- ------ --U3O8 100 mL ICP-66N-1 42 ------ -- ------ -- ------ --
500 mL ICP-66N-5 82 ------ -- ------ -- ------ --
Vanadium 20 mL ------ -- ------ -- ICP-67N-10X-20ML 37 ICP-67N-25X-20ML 70NH4VO3 50 mL ------ -- ICP-67N-0.5-10X 36 ------ -- ------ --2-5% Nitric acid 100 mL ICP-67N-1 34 ICP-67N-1-10X 65 ------ -- ------ --
500 mL ICP-67N-5 67 ICP-67N-5-10X 135 ------ -- ------ --Ytterbium 20 mL ------ -- ------ -- ICP-68N-10X-20ML 55 ICP-68N-25X-20ML 100Yb2O3 50 mL ------ -- ICP-68N-0.5-10X 60 ------ -- ------ --2-5% Nitric acid 100 mL ICP-68N-1 42 ICP-68N-1-10X 100 ------ -- ------ --
500 mL ICP-68N-5 82 ICP-68N-5-10X 273 ------ -- ------ --Yttrium 20 mL ------ -- ------ -- ICP-69N-10X-20ML 37 ICP-69N-25X-20ML 70Y2O3 50 mL ------ -- ICP-69N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-69N-1 34 ICP-69N-1-10X 54 ------ -- ------ --
500 mL ICP-69N-5 67 ICP-69N-5-10X 120 ------ -- ------ --Zinc 20 mL ------ -- ------ -- ICP-70N-10X-20ML 37 ICP-70N-25X-20ML 70Zn 50 mL ------ -- ICP-70N-0.5-10X 32 ------ -- ------ --2-5% Nitric acid 100 mL ICP-70N-1 34 ICP-70N-1-10X 54 ------ -- ------ --
500 mL ICP-70N-5 67 ICP-70N-5-10X 120 ------ -- ------ --Zirconium 20 mL ------ -- ------ -- ICP-71N-10X-20ML 37 ICP-71N-25X-20ML 70ZrO(NO3)2 50 mL ------ -- ICP-71N-0.5-10X 42 ------ -- ------ --2-5% Nitric acid 100 mL ICP-71N-1 34 ICP-71N-1-10X 70 ------ -- ------ --
500 mL ICP-71N-5 67 ICP-71N-5-10X 203 ------ -- ------ --
Calibration and Matrix Blanks
Mixed Acid BlankCLP-BLMA-5 $ 30 / 500 mLCLP-BLMA-L $ 45 / L (2 x 500 mL)
5% HCl + 1% HNO3 in ASTM Type I Water
Hydrochloric Acid BlankCLP-BLH-5 $ 30 / 500 mLCLP-BLH-L $ 45 / L (2 x 500 mL)
5% HCl in ASTM Type I Water
Water BlankCLP-BLW-5 $ 30 / 500 mL
$ 40 / L (2 x 500 mL)
ASTM Type I Water
Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L $ 45 / L (2 x 500 mL)
5% HNO3 in ASTM Type I Water
* see page 67 for details
72 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICP/MS Single Element StandardsPlasma Emission / Mass Spectroscopy
Pure Matrix Special Packaging Traceability to NIST Reference Materials
AccuStandard’s ICP/MS Standards are formulated to meet the needs of this very special instrument. As matrix effect is of utmost concern, eachstandard is formulated in specially purified de-ionized 18 megohm water and Parts per Trillion acids; after both wet chemical and instrumentalanalysis, the standards are packaged in acid leached FLPE containers to provide required protection and, of course, all standards are traceable tothe National Institute of Standards and Technology (NIST) weights and Reference Materials.
If you need an element that is not listed above or you require a different matrix, size orconcentration, our experienced chemists will provide you with a custom quotation. Get exactly what you need.
Al (Aluminum) 2% HNO3 100 mL ICP-MS-01N-0.01X-1 $ 34 ICP-MS-01N-0.1X-1 $ 45 ICP-MS-01N-1 $ 76
Sb (Antimony) 2% HNO3 100 mL ICP-MS-02N-0.01X-1 34 ICP-MS-02N-0.1X-1 45 ICP-MS-02N-1 76
As (Arsenic) 2% HNO3 100 mL ICP-MS-03N-0.01X-1 34 ICP-MS-03N-0.1X-1 45 ICP-MS-03N-1 76
Ba (Barium) 2% HNO3 100 mL ICP-MS-04N-0.01X-1 34 ICP-MS-04N-0.1X-1 45 ICP-MS-04N-1 76
Be (Beryllium) 2% HNO3 100 mL ICP-MS-05N-0.01X-1 34 ICP-MS-05N-0.1X-1 45 ICP-MS-05N-1 76
Bi (Bismuth) 2% HNO3 100 mL ICP-MS-06N-0.01X-1 34 ICP-MS-06N-0.1X-1 45 ICP-MS-06N-1 76
Cd (Cadmium) 2% HNO3 100 mL ICP-MS-08N-0.01X-1 34 ICP-MS-08N-0.1X-1 45 ICP-MS-08N-1 76
Ca (Calcium) 2% HNO3 100 mL ICP-MS-09N-0.01X-1 34 ICP-MS-09N-0.1X-1 45 ICP-MS-09N-1 76
Cr (Chromium) 2% HNO3 100 mL ICP-MS-13N-0.01X-1 34 ICP-MS-13N-0.1X-1 45 ICP-MS-13N-1 76
Co (Cobalt) 2% HNO3 100 mL ICP-MS-14N-0.01X-1 34 ICP-MS-14N-0.1X-1 45 ICP-MS-14N-1 76
Cu (Copper) 2% HNO3 100 mL ICP-MS-15N-0.01X-1 34 ICP-MS-15N-0.1X-1 45 ICP-MS-15N-1 76
Ge (Germanium) H2O tr. HF 100 mL ICP-MS-21W-0.01X-1 42 ICP-MS-21W-0.1X-1 53 ICP-MS-21W-1 84
Au (Gold) 10% HCl 100 mL ICP-MS-22H-0.01X-1 78 ICP-MS-22H-0.1X-1 89 ICP-MS-22H-1 120
In (Indium) 2% HNO3 100 mL ICP-MS-25N-0.01X-1 42 ICP-MS-25N-0.1X-1 53 ICP-MS-25N-1 84
Fe (Iron) 5% HNO3 100 mL ICP-MS-27N-0.01X-1 34 ICP-MS-27N-0.1X-1 45 ICP-MS-27N-1 76
Pb (Lead) 2% HNO3 100 mL ICP-MS-29N-0.01X-1 34 ICP-MS-29N-0.1X-1 45 ICP-MS-29N-1 76
Li (Lithium) 2% HNO3 100 mL ICP-MS-30N-0.01X-1 34 ICP-MS-30N-0.1X-1 45 ICP-MS-30N-1 76
Mg (Magnesium) 2% HNO3 100 mL ICP-MS-32N-0.01X-1 34 ICP-MS-32N-0.1X-1 45 ICP-MS-32N-1 76
Mn (Manganese) 2% HNO3 100 mL ICP-MS-33N-0.01X-1 34 ICP-MS-33N-0.1X-1 45 ICP-MS-33N-1 76
Hg (Mercury) 10% HNO3 100 mL ICP-MS-34N-0.01X-1 34 ICP-MS-34N-0.1X-1 45 ICP-MS-34N-1 76
Mo (Molybdenum) H2O tr. NH4OH 100 mL ICP-MS-35W-0.01X-1 34 ICP-MS-35W-0.1X-1 45 ICP-MS-35W-1 76
Ni (Nickel) 2% HNO3 100 mL ICP-MS-37N-0.01X-1 34 ICP-MS-37N-0.1X-1 45 ICP-MS-37N-1 76
P (Phosphorous) H2O 100 mL ICP-MS-41W-0.01X-1 34 ICP-MS-41W-0.1X-1 45 ICP-MS-41W-1 76
K (Potassium) 2% HNO3 100 mL ICP-MS-43N-0.01X-1 34 ICP-MS-43N-0.1X-1 45 ICP-MS-43N-1 76
Rh (Rhodium) 10% HCl 100 mL ICP-MS-46H-0.01X-1 190 ICP-MS-46H-0.1X-1 201 ICP-MS-46H-1 232
Sc (Scandium) 2% HNO3 100 mL ICP-MS-50N-0.01X-1 78 ICP-MS-50N-0.1X-1 89 ICP-MS-50N-1 120
Se (Selenium) 2% HNO3 100 mL ICP-MS-51N-0.01X-1 34 ICP-MS-51N-0.1X-1 45 ICP-MS-51N-1 76
Ag (Silver) 2% HNO3 100 mL ICP-MS-53N-0.01X-1 34 ICP-MS-53N-0.1X-1 45 ICP-MS-53N-1 76
Na (Sodium) 2% HNO3 100 mL ICP-MS-54N-0.01X-1 34 ICP-MS-54N-0.1X-1 45 ICP-MS-54N-1 76
Sr (Strontium) 2% HNO3 100 mL ICP-MS-55N-0.01X-1 34 ICP-MS-55N-0.1X-1 45 ICP-MS-55N-1 76
S (Sulphur) H2O 100 mL ICP-MS-56W-0.01X-1 34 ICP-MS-56W-0.1X-1 45 ICP-MS-56W-1 76
Tb (Terbium) 2% HNO3 100 mL ICP-MS-59N-0.01X-1 42 ICP-MS-59N-0.1X-1 53 ICP-MS-59N-1 84
Tl (Thallium) 2% HNO3 100 mL ICP-MS-60N-0.01X-1 34 ICP-MS-60N-0.1X-1 45 ICP-MS-60N-1 76
Th (Thorium) 2% HNO3 100 mL ICP-MS-61N-0.01X-1 34 ICP-MS-61N-0.1X-1 45 ----------------- ---
Sn (Tin) 2% HNO3 tr HF 100 mL ICP-MS-63N-0.01X-1 34 ICP-MS-63N-0.1X-1 45 ICP-MS-63N-1 76
Ti (Titanium) H2O tr. HF 100 mL ICP-MS-64W-0.01X-1 34 ICP-MS-64W-0.1X-1 45 ICP-MS-64W-1 76
U (Uranium) 2% HNO3 100 mL ICP-MS-66N-0.01X-1 42 ICP-MS-66N-0.1X-1 53 ----------------- ---
V (Vanadium) 2% HNO3 100 mL ICP-MS-67N-0.01X-1 34 ICP-MS-67N-0.1X-1 45 ICP-MS-67N-1 76
Y (Yttrium) 2% HNO3 100 mL ICP-MS-69N-0.01X-1 34 ICP-MS-69N-0.1X-1 45 ICP-MS-69N-1 76
Zn (Zinc) 2% HNO3 100 mL ICP-MS-70N-0.01X-1 34 ICP-MS-70N-0.1X-1 45 ICP-MS-70N-1 76
100 µg/mL Conc. 1,000 µg/mL Conc. 10,000 µg/mL Conc.Element Matrix Unit Cat. No. Price Cat. No. Price Cat. No. Price
ICP/
MS
73Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
AA
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
AA Single Element StandardsAtomic Absorption Spectroscopy
Most available in either Nitric or Hydrochloric acid matrix
ISO 9001 Quality System
For your conveniencethese elements are alsoavailable in OtherMatrices.
Contact TechnicalService for more info
Traceable to NIST Reference Materials
Certificate of Analysis included at No Charge with each Standard
Actual Concentration Analysis
Each standard is prepared from high purity starting material, de-ionized water and high purity acids. Every standard is instrumentally assayedto verify concentration of specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.
ElementStarting Mat'l 1000 µg/mLMatrix Unit Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
Aluminum 20 mL ------ -- AA01N-10X-20ML $ 20 AA01N-25X-20ML $ 372-5% Nitric acid 100 mL AA01N-1 $ 13 ------ -- ------ --
500 mL AA01N-5 33 ------ -- ------ --Antimony 20 mL ------ -- AA02W-10X-20ML 20 ------ --H2O tr. HNO3 tr. 100 mL AA02N-1 13 ------ -- ------ --Tartaric acid 500 mL AA02N-5 33 ------ -- ------ --Arsenic 20 mL ------ -- AA03N-10X-20ML 20 AA03N-25X-20ML 372-5% Nitric acid 100 mL AA03N-1 13 ------ -- ------ --
500 mL AA03N-5 33 ------ -- ------ --Barium 20 mL ------ -- AA04N-10X-20ML 20 AA04N-25X-20ML 372-5% Nitric acid 100 mL AA04N-1 12 ------ -- ------ --
500 mL AA04N-5 30 ------ -- ------ --Beryllium 20 mL ------ -- AA05N-10X-20ML 20 ------ --2-5% Nitric acid 100 mL AA05N-1 19 ------ -- ------ --
500 mL AA05N-5 48 ------ -- ------ --Bismuth 20 mL ------ -- AA06N-10X-20ML 20 AA06N-25X-20ML 372-5% Nitric acid 100 mL AA06N-1 13 ------ -- ------ --
500 mL AA06N-5 33 ------ -- ------ --Boron 20 mL ------ -- AA07W-10X-20ML 20 ------ --Water tr. NH4OH 100 mL AA07W-1 13 ------ -- ------ --
500 mL AA07W-5 33 ------ -- ------ --Cadmium 20 mL ------ -- AA08N-10X-20ML 20 AA08N-25X-20ML 372-5% Nitric acid 100 mL AA08N-1 13 ------ -- ------ --
500 mL AA08N-5 33 ------ -- ------ --Calcium 20 mL ------ -- AA09N-10X-20ML 20 AA09N-25X-20ML 372-5% Nitric acid 100 mL AA09N-1 12 ------ -- ------ --
500 mL AA09N-5 30 ------ -- ------ --Cerium 20 mL ------ -- AA11N-10X-20ML 20 AA11N-25X-20ML 452-5% Nitric acid 100 mL AA11N-1 18 ------ -- ------ --
500 mL AA11N-5 40 ------ -- ------ --Cesium 20 mL ------ -- AA12N-10X-20ML 35 AA12N-25X-20ML 602-5% Nitric acid 100 mL AA12N-1 15 ------ -- ------ --
500 mL AA12N-5 36 ------ -- ------ --Chromium 20 mL ------ -- AA13N-10X-20ML 20 AA13N-25X-20ML 372-5% Nitric acid 100 mL AA13N-1 12 ------ -- ------ --
500 mL AA13N-5 30 ------ -- ------ --Cobalt 20 mL ------ -- AA14N-10X-20ML 20 AA14N-25X-20ML 372-5% Nitric acid 100 mL AA14N-1 12 ------ -- ------ --
500 mL AA14N-5 30 ------ -- ------ --Copper 20 mL ------ -- AA15N-10X-20ML 20 AA15N-25X-20ML 372-5% Nitric acid 100 mL AA15N-1 12 ------ -- ------ --
500 mL AA15N-5 30 ------ -- ------ --Dysprosium 20 mL ------ -- AA16N-10X-20ML 35 AA16N-25X-20ML 602-5% Nitric acid 100 mL AA16N-1 20 ------ -- ------ --
500 mL AA16N-5 45 ------ -- ------ --Erbium 20 mL ------ -- AA17N-10X-20ML 35 AA17N-25X-20ML 602-5% Nitric acid 100 mL AA17N-1 20 ------ -- ------ --
500 mL AA17N-5 45 ------ -- ------ --Europium 20 mL ------ -- AA18N-10X-20ML 35 AA18N-25X-20ML 602-5% Nitric acid 100 mL AA18N-1 20 ------ -- ------ --
500 mL AA18N-5 45 ------ -- ------ --Gadolinium 20 mL ------ -- AA19N-10X-20ML 35 AA19N-25X-20ML 602-5% Nitric acid 100 mL AA19N-1 20 ------ -- ------ --
500 mL AA19N-5 45 ------ -- ------ --Gallium 20 mL ------ -- AA20N-10X-20ML 45 ------ --2-5% Nitric acid 100 mL AA20N-1 15 ------ -- ------ --
500 mL AA20N-5 36 ------ -- ------ --Germanium 20 mL ------ -- AA21W-10X-20ML 35 ------ --Water tr. HF 100 mL AA21W-1 18 ------ -- ------ --
500 mL AA21W-5 40 ------ -- ------ --Gold 20 mL ------ -- AA22H-10X-20ML 80 AA22H-25X-20ML 20010% HCl (min.) 100 mL AA22H-1 66 ------ -- ------ --
500 mL AA22H-5 179 ------ -- ------ --
* see page 67for details
74 Quality System is Certified to comply with the International ISO 9001 Quality Standard
AA
Hafnium 20 mL ------ -- AA23N-10X-20ML $ 60 AA23N-25X-20ML $ 1252-5% Nitric acid tr. HF 100 mL AA23N-1 $ 45 ------ -- ------ --
500 mL AA23N-5 110 ------ -- ------ --Holmium 20 mL ------ -- AA24N-10X-20ML 35 AA24N-25X-20ML 602-5% Nitric acid 100 mL AA24N-1 20 ------ -- ------ --
500 mL AA24N-5 45 ------ -- ------ --Indium 20 mL ------ -- AA25N-10X-20ML 35 AA25N-25X-20ML 602-5% Nitric acid 100 mL AA25N-1 18 ------ -- ------ --
500 mL AA25N-5 40 ------ -- ------ --Iridium 20 mL ------ -- AA26H-10X-20ML 70 AA26H-25X-20ML 16510% HCl (min.) 100 mL AA26H-1 65 ------ -- ------ --
500 mL AA26H-5 150 ------ -- ------ --Iron 20 mL ------ -- AA27N-10X-20ML 20 AA27N-25X-20ML 372-5% Nitric acid 100 mL AA27N-1 12 ------ -- ------ --
500 mL AA27N-5 30 ------ -- ------ --Lanthanum 20 mL ------ -- AA28N-10X-20ML 20 AA28N-25X-20ML 372-5% Nitric acid 100 mL AA28N-1 15 ------ -- ------ --
500 mL AA28N-5 36 ------ -- ------ --Lead 20 mL ------ -- AA29N-10X-20ML 20 AA29N-25X-20ML 372-5% Nitric acid 100 mL AA29N-1 12 ------ -- ------ --
500 mL AA29N-5 30 ------ -- ------ --Lithium 20 mL ------ -- AA30N-10X-20ML 20 AA30N-25X-20ML 372-5% Nitric acid 100 mL AA30N-1 12 ------ -- ------ --
500 mL AA30N-5 30 ------ -- ------ --Lutetium 20 mL ------ -- AA31N-10X-20ML 80 AA31N-25X-20ML 2752-5% Nitric acid 100 mL AA31N-1 65 ------ -- ------ --
500 mL AA31N-5 250 ------ -- ------ --Magnesium 20 mL ------ -- AA32N-10X-20ML 20 AA32N-25X-20ML 372-5% Nitric acid 100 mL AA32N-1 12 ------ -- ------ --
500 mL AA32N-5 30 ------ -- ------ --Manganese 20 mL ------ -- AA33N-10X-20ML 20 AA33N-25X-20ML 372-5% Nitric acid 100 mL AA33N-1 11 ------ -- ------ --
500 mL AA33N-5 28 ------ -- ------ --Mercury 20 mL ------ -- AA34N-10X-20ML 20 AA34N-25X-20ML 3710% Nitric acid 100 mL AA34N-1 13 ------ -- ------ --
500 mL AA34N-5 33 ------ -- ------ --Molybdenum 20 mL ------ -- AA35W-10X-20ML 20 AA35W-25X-20ML 37Water tr. NH4OH 100 mL AA35W-1 13 ------ -- ------ --
500 mL AA35W-5 33 ------ -- ------ --Neodymium 20 mL ------ -- AA36N-10X-20ML 25 AA36N-25X-20ML 502-5% Nitric acid 100 mL AA36N-1 20 ------ -- ------ --
500 mL AA36N-5 45 ------ -- ------ --Nickel 20 mL ------ -- AA37N-10X-20ML 20 AA37N-25X-20ML 372-5% Nitric acid 100 mL AA37N-1 12 ------ -- ------ --
500 mL AA37N-5 30 ------ -- ------ --Niobium 20 mL ------ -- AA38W-10X-20ML 20 AA38W-25X-20ML 37Water tr. HF 100 mL AA38W-1 15 ------ -- ------ --
500 mL AA38W-5 36 ------ -- ------ --Palladium 20 mL ------ -- AA40H-10X-20ML 80 AA40H-25X-20ML 17510% HCl (min.) 100 mL AA40H-1 62 ------ -- ------ --
500 mL AA40H-5 145 ------ -- ------ --Phosphorus 20 mL ------ -- AA41W-10X-20ML 20 ------ --Water 100 mL AA41W-1 13 ------ -- ------ --
500 mL AA41W-5 33 ------ -- ------ --Platinum 20 mL ------ -- AA42H-10X-20ML 80 AA42H-25X-20ML 17510% HCl (min.) 100 mL AA42H-1 62 ------ -- ------ --
500 mL AA42H-5 145 ------ -- ------ --Potassium 20 mL ------ -- AA43N-10X-20ML 20 AA43N-25X-20ML 372-5% Nitric acid 100 mL AA43N-1 12 ------ -- ------ --
500 mL AA43N-5 30 ------ -- ------ --Praseodymium 20 mL ------ -- AA44N-10X-20ML 35 AA44N-25X-20ML 602-5% Nitric acid 100 mL AA44N-1 20 ------ -- ------ --
500 mL AA44N-5 45 ------ -- ------ --Rhenium 20 mL ------ -- AA45W-10X-20ML 80 AA45W-25X-20ML 175Water 100 mL AA45W-1 65 ------ -- ------ --
500 mL AA45W-5 150 ------ -- ------ --Rhodium 20 mL ------ -- AA46H-10X-20ML 210 AA46H-25X-20ML 42510% HCl (min.) 100 mL AA46H-1 80 ------ -- ------ --
500 mL AA46H-5 385 ------ -- ------ --Rubidium 20 mL ------ -- AA47N-10X-20ML 20 AA47N-25X-20ML 372-5% Nitric acid 100 mL AA47N-1 15 ------ -- ------ --
500 mL AA47N-5 36 ------ -- ------ --Ruthenium 20 mL ------ -- AA48H-10X-20ML 80 AA48H-25X-20ML 16510% HCl 100 mL AA48H-1 65 ------ -- ------ --
500 mL AA48H-5 150 ------ -- ------ --
AA Single Element StandardsAtomic Absorption Spectroscopy
ElementStarting Mat'l 1000 µg/mLMatrix Unit Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
* see page 67for details
75Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
AA
Samarium 20 mL ------ -- AA49N-10X-20ML $ 35 AA49N-25X-20ML $ 602-5% Nitric acid 100 mL AA49N-1 $ 20 ------ -- ------ --
500 mL AA49N-5 45 ------ -- ------ --Scandium 20 mL ------ -- AA50N-10X-20ML 75 AA50N-25X-20ML 1602-5% Nitric acid 100 mL AA50N-1 62 ------ -- ------ --
500 mL AA50N-5 145 ------ -- ------ --Selenium 20 mL ------ -- AA51N-10X-20ML 20 AA51N-25X-20ML 502-5% Nitric acid 100 mL AA51N-1 19 ------ -- ------ --
500 mL AA51N-5 46 ------ -- ------ --Silicon 20 mL ------ -- AA-52W-10X-20ML 20 ------ --Water tr. HF 100 mL AA52W-1 13 ------ -- ------ --
500 mL AA52W-5 33 ------ -- ------ --Silver 20 mL ------ -- AA53N-10X-20ML 20 AA53N-25X-20ML 452-5% Nitric acid 100 mL AA53N-1 16 ------ -- ------ --
500 mL AA53N-5 40 ------ -- ------ --Sodium 20 mL ------ -- AA54N-10X-20ML 20 AA54N-25X-20ML 372-5% Nitric acid 100 mL AA54N-1 13 ------ -- ------ --
500 mL AA54N-5 33 ------ -- ------ --Strontium 20 mL ------ -- AA55N-10X-20ML 20 AA55N-25X-20ML 372-5% Nitric acid 100 mL AA55N-1 12 ------ -- ------ --
500 mL AA55N-5 30 ------ -- ------ --Sulfur 20 mL ------ -- AA56W-10X-20ML 20 AA56W-25X-20ML 37Water 100 mL AA56W-1 15 ------ -- ------ --
500 mL AA56W-5 35 ------ -- ------ --Tantalum 20 mL ------ -- AA57W-10X-20ML 35 AA57W-25X-20ML 60Water tr. HF 100 mL AA57W-1 15 ------ -- ------ --
500 mL AA57W-5 35 ------ -- ------ --Tellurium 20 mL ------ -- AA58H-10X-20ML 2010% HCl (min.) 100 mL AA58H-1 15 ------ -- ------ --
500 mL AA58H-5 35 ------ -- ------ --Terbium 20 mL ------ -- AA59N-10X-20ML 35 AA59N-25X-20ML 602-5% Nitric acid 100 mL AA59N-1 20 ------ -- ------ --
500 mL AA59N-5 45 ------ -- ------ --Thallium 20 mL ------ -- AA60N-10X-20ML 20 AA60N-25X-20ML 372-5% Nitric acid 100 mL AA60N-1 15 ------ -- ------ --
500 mL AA60N-5 35 ------ -- ------ --Thorium 20 mL ------ -- ------ -- ------ --
100 mL AA61N-1 20 ------ -- ------ --2-5% Nitric acid 500 mL AA61N-5 45 ------ -- ------ --Thulium 20 mL ------ -- AA62N-10X-20ML 65 AA62N-25X-20ML 1502-5% Nitric acid 100 mL AA62N-1 60 ------ -- ------ --
500 mL AA62N-5 135 ------ -- ------ --Tin 20 mL ------ -- AA63N-10X-20ML 20 AA63N-25X-20ML 502-5% Nitric acid tr. HF 100 mL AA63N-1 19 ------ -- ------ --
500 mL AA63N-5 46 ------ -- ------ --Titanium 20 mL ------ -- AA64W-10X-20ML 20 ------ --Water tr. HF 100 mL AA64W-1 13 ------ -- ------ --
500 mL AA64W-5 33 ------ -- ------ --Tungsten 20 mL ------ -- AA65W-10X-20ML 20Water tr. NH4OH 100 mL AA65W-1 15 ------ -- ------ --
500 mL AA65W-5 35 ------ -- ------ --Uranium 20 mL ------ -- ------ -- ------ --2-5% Nitric acid 100 mL AA66N-1 15 ------ -- ------ --
500 mL AA66N-5 35 ------ -- ------ --Vanadium 20 mL ------ -- AA67N-10X-20ML 20 AA67N-25X-20ML 372-5% Nitric acid 100 mL AA67N-1 13 ------ -- ------ --
500 mL AA67N-5 33 ------ -- ------ --Ytterbium 20 mL ------ -- AA68N-10X-20ML 35 AA68N-25X-20ML 602-5% Nitric acid 100 mL AA68N-1 20 ------ -- ------ --
500 mL AA68N-5 45 ------ -- ------ --Yttrium 20 mL ------ -- AA69N-10X-20ML 20 AA69N-25X-20ML 372-5% Nitric acid 100 mL AA69N-1 15 ------ -- ------ --
500 mL AA69N-5 35 ------ -- ------ --Zinc 20 mL ------ -- AA70N-10X-20ML 20 AA70N-25X-20ML 372-5% Nitric acid 100 mL AA70N-1 13 ------ -- ------ --
500 mL AA70N-5 33 ------ -- ------ --Zirconium 20 mL ------ -- AA71N-10X-20ML 20 AA71N-25X-20ML 372-5% Nitric acid 100 mL AA71N-1 15 ------ -- ------ --
500 mL AA71N-5 35 ------ -- ------ --
AA Single Element StandardsAtomic Absorption Spectroscopy
ElementStarting Mat'l 1000 µg/mLMatrix Unit Cat. No. Price
NoHaz Package (No Hazardous Charges) *10,000 µg/mL 25,000 µg/mL
Cat. No. Price Cat. No. Price
* see page 67for details
Ion Chrom - Anion Singles (Water Matrix)
76 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICIC
• 99.999% High Purity Starting Materials
• 18 Megohm, ASTM type 1 Water
• Packaged in pre-cleaned high quality HDPE bottles
• Each Standard is Supplied with a Certificate of Analysis,stating traceability to NIST, certified value and expiration date
• Final Solution is filtered through a 0.2 µm filter to eliminate contaminants (such as suspended solids andmicrobes). This extends shelf life and protects your column.
• Ready-To-Use Mixes and Calibration Sets
• Standards may be used for other “Classical or Wet” methods
• Most Complete Product Line
• "The Right Size” allows you to purchase as much or as little as you need - minimizing waste, and assuring Fresh Solution when you need it mostNext Day Delivery on request
Ion ChromatographyAnion Singles
Unit Anion Conc. Kit Anion Conc. Kit Anion Conc. Kit100 µg/mL Price 200 µg/mL Price 1000 µg/mL Price
Kit Price SAVE 25% 100 mL IC-AN-KIT-1X-1 $ 75 IC-AN-KIT-2X-1 $ 130 IC-AN-KIT-10X-1$ 235Kit = one bottle of each analyte 7 x 100 mL 7 x 100 mL 7 x 100 mL
IC-F-1X-1 IC-Cl-1X-1 IC-F-2X-1 IC-Cl-2X-1 IC-F-10X-1 IC-Cl-10X-1IC-NO2-1X-1 IC-NO3-1X-1 IC-NO2-2X-1 IC-NO3-2X-1 IC-NO2-10X-1 IC-NO3-10X-1IC-BR-1X-1 IC-PO4-1X-1 IC-BR-2X-1 IC-PO4-2X-1 IC-BR-10X-1 IC-PO4-10X-1IC-SO4-1X-1 IC-SO4-2X-1 IC-SO4-10X-1
Kit Price SAVE 25% 500 mL IC-AN-KIT-1X-5 $ 285 IC-AN-KIT-2X-5 $ 315 IC-AN-KIT-10X-5$ 365Kit = one bottle of each analyte 7 x 500 mL 7 x 500 mL 7 x 500 mL
IC-F-1X-5 IC-Cl-1X-5 IC-F-2X-5 IC-Cl-2X-5 IC-F-10X-5 IC-Cl-10X-5IC-NO2-1X-5 IC-NO3-1X-5 IC-NO2-2X-5 IC-NO3-2X-5 IC-NO2-10X-5 IC-NO3-10X-5IC-BR-1X-5 IC-PO4-1X-5 IC-BR-2X-5 IC-PO4-2X-5 IC-BR-10X-5 IC-PO4-10X-5IC-SO4-1X-5 IC-SO4-2X-5 IC-SO4-10X-5
Used for Influent & Effluent monitoring in aqueous matrices byASTM & other EPA Methods in the Petrochemical Industry
Ion Chrom - Anion Kits (Water Matrix)
Anion Conc. Price Anion Conc. Price Anion Conc. PriceSymbol (Element) Unit 100 µg/mL 200 µg/mL 1000 µg/mL
F (Fluoride) 100 mL IC-F-1X-1 $ 15 IC-F-2X-1 $ 25 IC-F-10X-1 $ 45500 mL IC-F-1X-5 55 IC-F-2X-5 60 IC-F-10X-5 70
Cl (Chloride) 100 mL IC-Cl-1X-1 $ 15 IC-Cl-2X-1 $ 25 IC-Cl-10X-1 $ 45500 mL IC-Cl-1X-5 55 IC-Cl-2X-5 60 IC-Cl-10X-5 70
NO2 (Nitrite) 100 mL IC-NO2-1X-1 $ 15 IC-NO2-2X-1 $ 25 IC-NO2-10X-1 $ 45500 mL IC-NO2-1X-5 55 IC-NO2-2X-5 60 IC-NO2-10X-5 70
NO3 (Nitrate) 100 mL IC-NO3-1X-1 $ 15 IC-NO3-2X-1 $ 25 IC-NO3-10X-1 $ 45500 mL IC-NO3-1X-5 55 IC-NO3-2X-5 60 IC-NO3-10X-5 70
Br (Bromide) 100 mL IC-BR-1X-1 $ 15 IC-BR-2X-1 $ 25 IC-BR-10X-1 $ 45500 mL IC-BR-1X-5 55 IC-BR-2X-5 60 IC-BR-10X-5 70
PO4 (Phosphate) 100 mL IC-PO4-1X-1 $ 15 IC-PO4-2X-1 $ 25 IC-PO4-10X-1 $ 45500 mL IC-PO4-1X-5 55 IC-PO4-2X-5 60 IC-PO4-10X-5 70
SO4 (Sulfate) 100 mL IC-SO4-1X-1 $ 15 IC-SO4-2X-1 $ 25 IC-SO4-10X-1 $ 45500 mL IC-SO4-1X-5 55 IC-SO4-2X-5 60 IC-SO4-10X-5 70
77Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
IC
ICIon Chromatography
Anion Mixtures
Anion Mixes Ion Chrom Standards
IC-MAN-09-SETIC-MAN-10-SET
CLP-BLW-5 (500 mL)IC-MAN-07-SETIC-MAN-08-SET
Anion Mix #14 RevisedIC-MAN-14-R2-SET$ 115 / 2 x 100 mLIC-MAN-14-R2-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLBr (Bromide) 100 µg/mLN-NO3 (Nitrogen-Nitrate) 100 µg/mLP-PO4 (Phosphorus-Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL
IC-NO2-N-1X-1 $ 15 / 100 mLN-NO2 (Nitrogen-Nitrite) 100 µg/mL
IC-MAN-14-R2-SET is perfect for US EPA Method 300.0
Anion Mix #1IC-MAN-01-1 $ 100 / 100 mLWater Matrix 5 comps.
F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL
Anion Mix #18IC-MAN-18-SET $ 115 / 2 x 100 mLIC-MAN-18-R1-1 $ 85 / 100 mLWater Matrix 5 comps.
F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mLSO4 (Sulfate) 100 µg/mL
IC-NO2-1X-1 $ 15 / 100 mLNO2 (Nitrite) 100 µg/mL
Anion Mix #17IC-MAN-17-SET $ 100 / 2 x 100 mLIC-MAN-17-R1-1 $ 85 / 100 mLWater Matrix 5 comps.
Cl (Chloride) 20 µg/mLBr (Bromide) 12 µg/mLNO3 (Nitrate) 12 µg/mLPO4 (Phosphate) 12 µg/mLSO4 (Sulfate) 80 µg/mL
IC-NO2-0.12X-1 100 mLNO2 (Nitrite) 12 µg/mL
Anion Mix #16IC-MAN-16-SET $ 115 / 2 x 100 mLIC-MAN-16-R1-1 $ 100 / 100 mLWater Matrix 6 comps.
F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 100 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 30 µg/mLSO4 (Sulfate) 20 µg/mL
IC-NO2-0.4X-1 $ 15 / 100 mLNO2 (Nitrite) 40 µg/mL
Anion Mix #15IC-MAN-15R-SET $ 80 / 2 x 100 mLIC-MAN-15-R2-1 $ 70 / 100 mLWater Matrix 3 comps.
F (Fluoride) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mL
IC-NO2-1X-1 $ 15 / 100 mLNO2 (Nitrite) 100 µg/mL
Anion Mix #14IC-MAN-14-SET $ 115 / 2 x 100 mLIC-MAN-14-R3-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO3 (Nitrate) 100 µg/mLBr (Bromide) 100 µg/mLPO4 (Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL
IC-NO2-1X-1 $ 15 / 100 mLNO2 (Nitrite) 100 µg/mL
Anion Mix #13IC-MAN-13-1 $ 75 / 100 mLWater Matrix 3 comps.
F (Fluoride) 25 µg/mLCl (Chloride) 50 µg/mLSO4 (Sulfate) 100 µg/mL
Anion Mix #12IC-MAN-12-1 $ 100 / 100 mLWater Matrix 5 comps.
Cl (Chloride) 15 µg/mLBr (Bromide) 15 µg/mLNO3 (Nitrate) 15 µg/mLPO4 (Phosphate) 15 µg/mLSO4 (Sulfate) 15 µg/mL
Anion Mix #11IC-MAN-11-1 $ 175 / 100 mLWater Matrix 5 comps.
Cl (Chloride) 1000 µg/mLBr (Bromide) 1000 µg/mLNO3 (Nitrate) 1000 µg/mLPO4 (Phosphate) 1000 µg/mLSO4 (Sulfate) 1000 µg/mL
Anion Mix #10IC-MAN-10-SET $ 100 / 2 x 100 mLIC-MAN-10-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 25 µg/mLCl (Chloride) 50 µg/mLBr (Bromide) 50 µg/mLNO3 (Nitrate) 50 µg/mLPO4 (Phosphate) 50 µg/mLSO4 (Sulfate) 50 µg/mL
IC-NO2-0.5X-1 100 mLNO2 (Nitrite) 50 µg/mL
Anion Mix #9IC-MAN-09-SET $ 100 / 2 x 100 mLIC-MAN-09-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 20 µg/mLCl (Chloride) 40 µg/mLBr (Bromide) 40 µg/mLNO3 (Nitrate) 40 µg/mLPO4 (Phosphate) 40 µg/mLSO4 (Sulfate) 40 µg/mL
IC-NO2-0.4X-1 100 mLNO2 (Nitrite) 40 µg/mL
Anion Mix #8IC-MAN-08-SET $ 100 / 2 x 100 mLIC-MAN-08-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 20 µg/mLSO4 (Sulfate) 20 µg/mL
IC-NO2-0.2X-1 100 mLNO2 (Nitrite) 20 µg/mL
Anion Mix #7IC-MAN-07-SET $ 100 / 2 x 100 mLIC-MAN-07-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 1 µg/mLCl (Chloride) 10 µg/mLBr (Bromide) 10 µg/mLNO3 (Nitrate) 10 µg/mLPO4 (Phosphate) 10 µg/mLSO4 (Sulfate) 10 µg/mL
IC-NO2-0.1X-1 100 mLNO2 (Nitrite) 10 µg/mL
Anion Mix #6IC-MAN-06-SET $ 100 / 2 x 100 mLIC-MAN-06-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 1 µg/mLCl (Chloride) 5 µg/mLBr (Bromide) 5 µg/mLNO3 (Nitrate) 5 µg/mLPO4 (Phosphate) 5 µg/mLSO4 (Sulfate) 10 µg/mL
IC-NO2-0.05X-1 100 mLNO2 (Nitrite) 5 µg/mL
Anion Mix #5IC-MAN-05-SET $ 100 / 2 x 100 mLIC-MAN-05-R1-1 $ 85 / 100 mLWater Matrix 6 comps.
F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 5 µg/mLSO4 (Sulfate) 30 µg/mL
IC-NO2-0.2X-1 100 mLNO2 (Nitrite) 20 µg/mL
Anion Mix #4IC-MAN-04-1 $ 115 / 100 mLWater Matrix 6 comps.
F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLBr (Bromide) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mLSO4 (Sulfate) 100 µg/mL
Anion Mix #3IC-MAN-03-1 $ 75 / 100 mLWater Matrix 3 comps.
F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLSO4 (Sulfate) 100 µg/mL
Anion Mix #2IC-MAN-02-1 $ 115 / 100 mLWater Matrix 6 comps.
F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 400 µg/mLNO3 (Nitrate) 400 µg/mLPO4 (Phosphate) 600 µg/mLSO4 (Sulfate) 400 µg/mL
IC-MAN-CAL-SET $ 395 / 9 x 100 mLContains one each of:
Don't see the solution you need ?Use our Custom Quotation FAX Form in theback of the catalog and take advantage ofour technical experience to help youformulate the solutions for your problems.
This Ready-to-Use set ofstandards can be used togenerate a 5 point calibrationcurve (including blank).
In order to enhance the shelf life andlong term stability of our IC products.AccuStandard has split the Nitrite outof mixes that contain Nitrate.
Technical Note
Technical Note
Ion Chrom - Cation Singles (Dilute HNO3 Matrix)
Cation Mixes Ion Chrom Standards
78 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICICIon Chromatography
Used for Influent & Effluent monitoring in aqueous matrices byASTM & other EPA Methods in the Petrochemical Industry
Symbol (Element) Unit 100 µg/mL Price 200 µg/mL Price 1000 µg/mL Price
Ca (Calcium) 100 mL IC-CA-1X-1 $ 15 IC-CA-2X-1 $ 25 IC-CA-10X-1 $ 45500 mL IC-CA-1X-5 55 IC-CA-2X-5 60 IC-CA-10X-5 70
NH4 (Ammonium) 100 mL IC-NH4-1X-1 $ 15 IC-NH4-2X-1 $ 25 IC-NH4-10X-1 * $ 45500 mL IC-NH4-1X-5 55 IC-NH4-2X-5 60 IC-NH4-10X-5 * 70
Mg (Magnesium) 100 mL IC-MG-1X-1 $ 15 IC-MG-2X-1 $ 25 IC-MG-10X-1 $ 45500 mL IC-MG-1X-5 55 IC-MG-2X-5 60 IC-MG-10X-5 70
K (Potassium) 100 mL IC-K-1X-1 $ 15 IC-K-2X-1 $ 25 IC-K-10X-1 $ 45500 mL IC-K-1X-5 55 IC-K-2X-5 60 IC-K-10X-5 70
Na (Sodium) 100 mL IC-NA-1X-1 $ 15 IC-NA-2X-1 $ 25 IC-NA-10X-1 $ 45500 mL IC-NA-1X-5 55 IC-NA-2X-5 60 IC-NA-10X-5 70
Li (Lithium) 100 mL IC-LI-1X-1 $ 15 IC-LI-2X-1 $ 25 IC-LI-10X-1 $ 45500 mL IC-LI-1X-5 55 IC-LI-2X-5 60 IC-LI-10X-5 70
Ba (Barium) 100 mL IC-BA-1X-1 $ 15 IC-BA-2X-1 $ 25 IC-BA-10X-1 $ 45500 mL IC-BA-1X-5 55 IC-BA-2X-5 60 IC-BA-10X-5 70
Sr (Strontium) 100 mL IC-SR-1X-1 $ 15 IC-SR-2X-1 $ 25 IC-SR-10X-1 $ 45500 mL IC-SR-1X-5 55 IC-SR-2X-5 60 IC-SR-10X-5 70
Ion Chrom - Cation Kits (Dilute HNO3 Matrix)Unit 100 µg/mL Price 200 µg/mL Price 1000 µg/mL Price
Kit Price SAVE 25% 100 mL IC-CAT-KIT-1X-1 $ 75 IC-CAT-KIT-2X-1 $ 130 IC-CAT-KIT-10X-1 $ 235Kit = one bottle of each analyte 8 x 100 mL 8 x 100 mL 8 x 100 mL
IC-CA-1X-1 IC-NH4-1X-1 IC-CA-2X-1 IC-NH4-2X-1 IC-CA-10X-1 IC-NH4-10X-1IC-MG-1X-1 IC-K-1X-1 IC-MG-2X-1 IC-K-2X-1 IC-MG-10X-1 IC-K-10X-1IC-NA-1X-1 IC-LI-1X-1 IC-NA-2X-1 IC-LI-2X-1 IC-NA-10X-1 IC-LI-10X-1IC-BA-1X-1 IC-SR-1X-1 IC-BA-2X-1 IC-SR-2X-1 IC-BA-10X-1 IC-SR-10X-1
Kit Price SAVE 25% 500 mL IC-CAT-KIT-1X-5 $ 285 IC-CAT-KIT-2X-5 $ 315 IC-CAT-KIT-10X-5 $ 365Kit = one bottle of each analyte 8 x 500 mL 8 x 500 mL 8 x 500 mL
IC-CA-1X-5 IC-NH4-1X-5 IC-CA-2X-5 IC-NH4-2X-5 IC-CA-10X-5 IC-NH4-10X-5IC-MG-1X-5 IC-K-1X-5 IC-MG-2X-5 IC-K-2X-5 IC-MG-10X-5 IC-K-10X-5IC-NA-1X-5 IC-LI-1X-5 IC-NA-2X-5 IC-LI-2X-5 IC-NA-10X-5 IC-LI-10X-5IC-BA-1X-5 IC-SR-1X-5 IC-BA-2X-5 IC-SR-2X-5 IC-BA-10X-5 IC-SR-10X-5
Cation Mix #6IC-MCA-06-1 $ 125 / 100 mLDilute HNO3 6 comps.
Cation Mix #5IC-MCA-05-1 $ 125 / 100 mLDilute HNO3 4 comps.
NH4 (Ammonium) 3 µg/mLK (Potassium) 6 µg/mLNa (Sodium) 3 µg/mLLi (Lithium) 0.5 µg/mL
Cation Mix #4IC-MCA-04-1 $ 125 / 100 mLDilute HNO3 4 comps.
Ca (Calcium) 400 µg/mLMg (Magnesium) 200 µg/mLBa (Barium) 1600 µg/mLSr (Strontium) 600 µg/mL
Cation Mix #3IC-MCA-03-1 $ 100 / 100 mLDilute HNO3 4 comps.
Ca (Calcium) 100 µg/mLNH4 (Ammonium) 100 µg/mLNa (Sodium) 50 µg/mLLi (Lithium) 10 µg/mL
Cation Mix #2IC-MCA-02-1 $ 125 / 100 mLDilute HNO3 6 comps.
Cation Mix #1IC-MCA-01-1 $ 150 / 100 mLDilute HNO3 6 comps.
Ca (Calcium) 1000 µg/mLNH4 (Ammonium) 400 µg/mLMg (Magnesium) 200 µg/mL
K (Potassium) 200 µg/mLNa (Sodium) 200 µg/mLLi (Lithium) 50 µg/mL
Ca (Calcium) 100 µg/mLNH4 (Ammonium) 100 µg/mLMg (Magnesium) 100 µg/mL
K (Potassium) 100 µg/mLNa (Sodium) 100 µg/mLLi (Lithium) 100 µg/mL
Ca (Calcium) 2 µg/mLNH4 (Ammonium) 1.5 µg/mLMg (Magnesium) 2 µg/mL
K (Potassium) 2.5 µg/mLNa (Sodium) 1.5 µg/mLLi (Lithium) 0.2 µg/mL
* These Standards are 1,000 µg/mL as Ammonium (NH4)Other Nitrogen species equivalents are: NH3 (Ammonia) = 944 µg/mL N (Nitrogen) = 776 µg/mL
Ion Chrom Eluents
79Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
IC
ICIon Chromatography
0.5 M Sodium bicarbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 135 5 x 100 mL $ 250(100X concentrate) IC-ELU-01-0.5 IC-ELU-01-1 IC-ELU-01-0.5-PAK IC-ELU-01-1-PAK
0.5 M Sodium carbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 135 5 x 100 mL $ 250(100X concentrate) IC-ELU-02-0.5 IC-ELU-02-1 IC-ELU-02-0.5-PAK IC-ELU-02-1-PAK
0.18 M Sodium carbonate/ 50 mL $ 25 100 mL $ 30 5 x 50 mL $ 60 5 x 100 mL $ 1150.17 M Sodium bicarbonate IC-ELU-03-0.5 IC-ELU-03-1 IC-ELU-03-0.5-PAK IC-ELU-03-1-PAK
(100X concentrate)
Easy to use, ready to diluteconcentrates. Open a freshbottle and dilute the volume(50 mL to 5 L or 100 mL to 10 L)and be assured of a freshuncontaminated mobile phase.
EPA 300.0, ASTM Method D-4327
Ion Chrom - Ion Singles as the ElementUnit 100 µg/mL Price 1000 µg/mL Price
NO2-N (Nitrite-Nitrogen) 100 mL IC-NO2-N-1X-1 $ 15 IC-NO2-N-10X-1 $ 45Water Matrix 500 mL IC-NO2-N-1X-5 55 IC-NO2-N-10X-5 70
NO3-N (Nitrate-Nitrogen) 100 mL IC-NO3-N-1X-1 $ 15 IC-NO3-N-10X-1 $ 45Water Matrix 500 mL IC-NO3-N-1X-5 55 IC-NO3-N-10X-5 70
PO4-P (Phosphate-Phosphorous) 100 mL IC-PO4-P-1X-1 $ 15 IC-PO4-P-10X-1 $ 45Water Matrix 500 mL IC-PO4-P-1X-5 55 IC-PO4-P-10X-5 70
SO4-S (Sulfate-Sulfur) 100 mL IC-SO4-S-1X-1 $ 15 IC-SO4-S-10X-1 $ 45Water Matrix 500 mL IC-SO4-S-1X-5 55 IC-SO4-S-10X-5 70
NH4-N (Ammonium-Nitrogen) 100 mL IC-NH4-N-1X-1 $ 15 IC-NH4-N-10X-1 $ 45Water Matrix 500 mL IC-NH4-N-1X-5 55 IC-NH4-N-10X-5 70
Anion Singles KitsIC-AN-KIT-R-10X-1 $ 235 / 7 x 100 mLEach at 1000 µg/mL
IC-F-10X-1 FluorideIC-Cl-10X-1 ChlorideIC-NO2-N-10X-1 Nitrite-NitrogenIC-NO3-N-10X-1 Nitrate-NitrogenIC-BR-10X-1 BromideIC-PO4-P-10X-1 Phosphate-PhosphorousIC-SO4-S-10X-1 Sulfate-Sulfur
Recommended product for EPA Method 300.0“Determination of Inorganic Anions by IonChromatography” and ASTM D-4327-91, “TestMethod for Anions in Water by ChemicallySuppressed Ion Chromatography.”
IC-AN-KIT-R-10X-5 $ 365 / 7 x 500 mLEach at 1000 µg/mL
IC-F-10X-5 FluorideIC-Cl-10X-5 ChlorideIC-NO2-N-10X-5 Nitrite-NitrogenIC-NO3-N-10X-5 Nitrate-NitrogenIC-BR-10X-5 BromideIC-PO4-P-10X-5 Phosphate-PhosphorousIC-SO4-S-10X-5 Sulfate-Sulfur
Organic Acid Salt StandardsUnit 100 µg/mL Price 1000 µg/mL Price
Formate 100 mL IC-FORM-1X-1 $ 15 IC-FORM-10X-1 $ 45Water Matrix 500 mL IC-FORM-1X-5 55 IC-FORM-10X-5 70
Acetate 100 mL IC-ACET-1X-1 $ 15 IC-ACET-10X-1 $ 45Water Matrix 500 mL IC-ACET-1X-5 55 IC-ACET-10X-5 70
Oxalate 100 mL IC-OXAL-1X-1 $ 15 IC-OXAL-10X-1 $ 45Water Matrix 500 mL IC-OXAL-1X-5 55 IC-OXAL-10X-5 70
Chlorate 100 mL IC-CHLR-1X-1 $ 15 IC-CHLR-10X-1 $ 45Water Matrix 500 mL IC-CHLR-1X-5 55 IC-CHLR-10X-5 70
Chromate 100 mL IC-CHRM-1X-1 $ 15 IC-CHRM-10X-1 $ 45Water Matrix 500 mL IC-CHRM-1X-5 55 IC-CHRM-10X-5 70
Anion Mix #14 RevisedIC-MAN-14-R2-SET $ 115 / 2 x 100 mLIC-MAN-14-R2-1 100 mLWater Matrix 6 comps.
F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLBr (Bromide) 100 µg/mLN-NO3 (Nitrogen-Nitrate) 100 µg/mLP-PO4 (Phosphorus-Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL
IC-NO2-N-1X-1 100 mLN-NO2 (Nitrogen-Nitrite) 100 µg/mL
80
IC
There is an easier way to get Chemical Reference Standards
e-Standards® from AccuStandard.com
Over 30,000 Standardsjust a click away
On-Line Ordering
Custom Formulations
5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 30,000 products.Search by:
Catalog Number
Single or Multiple Components,
Method (EPA, ASTM, etc.)
Chemical Category (Organic, Inorganic, Petroleum, etc.)
Other Companies’ Part Number
Log on to www.accustandard.com and see how easy it is.
Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply to online orders, see
details on website.
On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need, we can prepare Custom Formulationsand Custom Packaging for both Organic and Inorganic needs.See our Website for more info.
AccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a customformulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. Tomake an inquiry for Custom Quotes visit our website.
You can also Email your requirements to [email protected] or Fax us at 203-786-5287. Please include the followinginformation: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (millilitersper ampule, bottle, or vial).
Quality Control Options1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (whereavailable). Every component in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. Thesolutions are made up to volume using class A glassware. A certificate comes with each standard and documents the gravimetricvalues used.2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plusstatistical analysis. A data package is provided containing analytical and gravimetric data (Organic customs only).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
81
LUFT/LUSTLUFT/LUST Standards
Alaska 82-84GRO HydrocarbonsDRO HydrocarbonsRRO Hydrocarbons
Arizona 85Diesel Range
California 85Gasoline
Connecticut 85Extractable TPHFlorida 86
FTRPH
TPH Pattern Recognition Standards 92-93
Weathered LUFT/LUST Fuel Standards 93
Gasoline Range HC Analysis (CA, PA, WI) 94
Diesel Range HC Analysis 95
ASTM Method D-2887 95
Complete Hydrocarbon Analysis 95
Proficiency Test Samples 96
Method 1664, Oil, Grease & TPH Analysis 97
Methods 413.2, 418.1 & TPH Analysis 97
Method 8440 TPH Analysis 97
Method 1004 Alcohol Oxidation Products in Engine Exhaust 98
ASTM E-1387 and E-1618 for Fire Debris Analysis 98
Skinner List Refinery Waste (ASTM#E1387) 98
Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
State Methods
Massachusetts 87-88EPHVPH
Mississippi 86DRO
Multi-State 86Hydrocarbon Window Defining
Pensylvania 89Storage Tank Monitoring Standards
Tennessee 86DRO
Texas 89Method 1005 (PST)
Washington 90-91VPHEPH
Wisconsin 91Gasoline Range Hydrocarbons
LUFT/LUST
Alaska Method Determination of Aromatic & Aliphatic Hydrocarbons in Gasoline Range Organics
Alaska Method Determination of Gasoline Range Organic (GRO) Hydrocarbons
Laboratory Control StandardThe Gasoline Laboratory Control Standard was taken from an ASTMselected fuel set and a source independent of what is being used inthe Gasoline Composite Mix.
Simultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC Department has certified the benzene,toluene, ethyl benzene and xylene concentrations in our unleadedgasoline standard (GA-001-20X-BTEX & in AK-101.0-GCS-BTEX).Use of either standard allows the analytical chemist in a singleinjection to verify that the QA/QC requirements are being met for theBTEX analytes as well as for the gasoline.
Since formulating the standards for the Alaskan method, andbecause of numerous laboratory requests, we have added a newmulti source certified BTEX in gasoline composite mix (AK-101.0-GCS-BTEX). The BTEX values for this multi-source calibrationstandard have been determined through in-house analysis against aBTEX multi level calibration curve, and are listed in the Certificate.
AccuStandard continues to look for innovative approaches to savethe analytical laboratory time and money.
Technical Notes
p-Ethyltolueneo-Ethyltoluenen-Propylbenzene
1,3,5-TrimethylbenzeneIsopropylbenzenem-Ethyltoluene
p-Xyleneo-Xylene1,2,3-Trimethylbenzene1,2,4-Trimethylbenzene
BenzeneTolueneEthylbenzenem-Xylene
AK101AA Aromatics MixAK-101AA-ARO $ 30 / 1 x 1 mLAK-101AA-ARO-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL each in MeOH 14 comps.
LUFT/LUST StandardsState Methods
Certified BTEX in Gasoline Composite Mix(Multi Source) see Technical NoteAK-101.0-GCS-BTEX $ 55 / 1 x 1 mL5 mg/mL total in MeOH 3 comps.
Gasoline - Premium (1.66 mg/mL)Gasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)
n-Nonanen-Decane
n-Hexanen-Heptanen-Octane
Certified BTEX in Unleaded Gasoline (Single Source)GA-001-20X-BTEX $ 55 / 1 x 1 mL10.0 mg/mL in MeOH
Gasoline - Regular, unleaded
Laboratory Control StandardAK-101.0-LCS $ 20 / 1 x 1 mLAK-101.0-LCS-PAK SAVE 20% $ 80 / 5 x 1 mL5.0 mg/mL in MeOH
Gasoline - Regular, unleaded
Normal Alkane Standard - GRO Defining MixtureAK-101.0-NAS-10X $ 20 / 1 x 1 mLAK-101.0-NAS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL2.0 mg/mL each in MeOH 5 comps.
Surrogate Control StandardAK-101.0-SS $ 10 / 1 x 1 mLAK-101.0-SS-PAK SAVE 20% $ 40 / 5 x 1 mL50 µg/mL each in MeOH
AK-101.0-SS-10X $ 20 / 1 x 1 mLAK-101.0-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL500 µg/mL each in MeOH
AK-101.0-SS-100X $ 20 / 1 x 1 mLAK-101.0-SS-100X-PAK SAVE 20% $ 80 / 5 x 1 mL5,000 µg/mL each in MeOH 2 comps.
p-Bromofluorobenzene a,a,a-Trifluorotoluene
82 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
Gasoline Calibration Mix Version 4/02AK-101-GSC-R1 $ 25 / 1 x 1 mLAK-101-GSC-R1-PAK SAVE 20% $ 100 / 5 x 1 mLEqual parts by weight of each
Gasoline - Regular, unleadedGasoline - Plus, unleadedGasoline - Premium, unleaded
Internal StandardAK-101.0-IS-10X $ 20 / 1 x 1 mLAK-101.0-IS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL2.0 mg/mL in MeOH
1-Chloro-4-fluorobenzene
Gasoline Calibration Composite MixtureAK-101.0-GCS $ 25 / 1 x 1 mLAK-101.0-GCS-PAK SAVE 20% $ 100 / 5 x 1 mLTotal 5.0 mg/mL in MeOH 3 comps.
Gasoline - Premium (1.66 mg/mL)Gasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)
NEW
LUFT/LUST Alaska
Alaska Method Determination of Diesel Range Organic (DRO) Hydrocarbons
#2 Diesel - Conventional (16.7 mg/mL)Diesel Fuel, Arctic (16.6 mg/mL)#1 Diesel - Low Sulfur (16.7 mg/mL)
#2 Diesel - extra Low Sulfur (16.7 mg/mL)
#2 Diesel - extra Low Sulfur (1.67 mg/mL)
n-Octadecanen-Nonadecanen-Eicosanen-Heneicosanen-Docosanen-Tricosanen-Tetracosanen-Pentacosane Internal Standard
AK-102.0-IS $ 15 / 1 x 1 mLAK-102.0-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
5-alpha Androstane
n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecanen-Hexadecanen-Heptadecane
Surrogate StandardsAK-102.0-SS $ 10 / 1 x 1 mLAK-102.0-SS-PAK SAVE 20% $ 40 / 5 x 1 mL200 µg/mL in Acetone
AK102.0-SS-10X $ 15 / 1 x 1 mLAK102.0-SS-10X-PAK SAVE 20% $ 60 / 5 x 1 mL2.0 mg/mL in Acetone
o-Terphenyl
Normal Alkane Standard - DRO Defining MixtureAK-102.0-NAS-10X $ 40 / 1 x 1 mLAK-102.0-NAS-10X-PAK SAVE 20% $ 160 / 5 x 1 mL2.0 mg/mL each in CH2Cl2 16 comps.
Diesel Fuel, Arctic (16.6 mg/mL)#1 Diesel - Low Sulfur (16.7 mg/mL)
Diesel Fuel, Arctic (1.66 mg/mL)#1 Diesel - Low Sulfur (1.67 mg/mL)
Stock Concentrate Diesel Calibration Composite MixtureAK-102.0-DCS-R1-10X $ 40 / 1 x 1 mLAK-102.0-DCS-R1-10X-PAKSAVE 20% $ 160 / 5 x 1 mLTotal 50.0 mg/mL in CH2Cl2 3 comps.
Laboratory Control StandardAK-102.0-LCS-R1-10X $ 20 / 1 x 1 mLAK-102.0-LCS-R1-10X-PAK SAVE 20% $ 80 / 5 x 1 mL50.0 mg/mL in Acetone
#2 Diesel - Conventional
AK-102.0-DCS-10X $ 40 / 1 x 1 mLAK-102.0-DCS-10X-PAK SAVE 20% $ 160 / 5 x 1 mLTotal 50.0 mg/mL in CH2Cl2 3 comps.
Laboratory Control Standard (low sulfur)AK-102.0-LCS $ 10 / 1 x 1 mLAK-102.0-LCS-PAK SAVE 20% $ 40 / 5 x 1 mL5.0 mg/mL in Acetone
AK102.0-LCS-10X $ 20 / 1 x 1 mLAK-102.0-LCS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL50.0 mg/mL in Acetone
#2 Diesel - extra Low Sulfur
Diesel Calibration Composite Mixture (low sulfur)AK-102.0-DCS $ 25 / 1 x 1 mLAK-102.0-DCS-PAK SAVE 20% $ 100 / 5 x 1 mLTotal 5.0 mg/mL in CH2Cl2 3 comps.
LUFT/LUST StandardsState Methods
83Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
AccuStandard originally formulated the Diesel Calibration Composite Mix and Laboratory Control Standard using two independent sourcesof #2 Diesel as required by the Alaskan method. Unfortunately, the chromatographic patterns for the #2 diesel sources (conventional &extra low sulfur) are different.
We have actively sought out and obtained independent sources of each type of #2 diesel to insure similar chromatographic patterns . Werecommend that when a customer is analyzing the Diesel Calibration Composite and Laboratory Control standard that the client orders AK-102.0-DCS & AK-102.0-LCS products together to obtain similar chromatographic patterns for #2 diesel extra low sulfur patterns and AK-102.0-DCS-R1-10X & AK-102.0-LCS-R1-10X products to obtain similar chromatographic patterns for #2 Diesel conventional patterns.
We believe most laboratories performing the Alaskan DRO analysis will find the #2 Diesel conventional chromatographic pattern moreclosely resembles typical Diesel samples drawn from environmental sites.
Technical Note
Technical NoteThe Laboratory Control Standard was prepared from anindependent source of material than what was used in the DieselCalibration Composite mix.
LUFT/LUST Alaska
Alaska Method Determination of Aromatic and Aliphatic Hydrocarbons in Residual Range Organics
Alaska Method Determination of Residual Range Organics (RRO) Hydrocarbon
Alaska Method Determination of Aromatic & Aliphatic Hydrocarbons in Diesel Range Organics
Squalaneo-Terphenyl5,6,7,8-Tetrahydro-1-naphtholn-Decane
n-Pentacosanen-Hexatriacontane
NaphthaleneAcenaphtheneFluorenePyreneAnthracene
n-Undecanen-Pentadecanen-Heptadecanen-Octadecanen-Tetracosane
AK102/103AA Retention TimeMarker StandardAK-102/103AA-RT $ 25 / 1 x 1 mLAK-102/103AA-RT-PAK $ 100 / 5 x 1 mL50 µg/mL each in CH2Cl2 3 comps.
AK102/103AA Surrogate StandardAK-102/103AA-SS $ 35 / 1 x 1 mLAK-102/103AA-SS-PAK SAVE 20% $ 140 / 5 x 1 mL1000 µg/mL each in CH2Cl2 3 comps.
AK102AA DRO StandardAK-102AA-DRO $ 40 / 1 x 1 mLAK-102AA-DRO-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH2Cl2 10 comps.
Benzo[b]fluorantheneBenzo[a]pyreneBenzo[g,h,i]peryleneDibenz[a,h]anthracene
LUFT/LUST StandardsState Methods
SAE 30W Motor Oil (16.6 mg)SAE 40W Motor Oil (16.7 mg)SAE 50W Motor Oil (16.7 mg)
SAE 30W Motor Oil (1.66 mg)SAE 40W Motor Oil (1.67 mg)SAE 50W Motor Oil (1.67 mg)
Laboratory Control StandardAK-103.0-LCS $ 10 / 1 x 1 mLAK-103.0-LCS-PAK SAVE 20% $ 40 / 5 x 1 mL5.0 mg/mL in Acetone
AK-103.0-LCS-5X $ 20 / 1 x 1 mLAK-103.0-LCS-5X-PAK SAVE 20% $ 80 / 5 x 1 mL25.0 mg/mL in Acetone: CH2Cl2 (1:1)
SAE 40W Motor Oil
Surrogate Control StandardAK-103.0-SS $ 20 / 1 x 1 mLAK-103.0-SS-PAK SAVE 20% $ 80 / 5 x 1 mL500 µg/mL in Acetone
AK-103.0-SS-10X $ 30 / 1 x 1 mLAK-103.0-SS-10X-PAK SAVE 20% $ 120 / 5 x 1 mL5.0 mg/mL in THF : Acetone (1:3)
n-Triacontane-d62
AK-103.0-RCS-10X $ 40 / 1 x 1 mLAK-103.0-RCS-10X-PAK SAVE 20% $ 160 / 5 x 1 mLTotal 50.0 mg/mL in CH2Cl2 3 comps.
Residual Composite MixturesAK-103.0-RCS $ 25 / 1 x 1 mLAK-103.0-RCS-PAK SAVE 20% $ 100 / 5 x 1 mLTotal 5.0 mg/mL in CH2Cl2 3 comps.
Squalaneo-Terphenyl5,6,7,8-Tetrahydro-1-naphtholn-Decane
n-Pentacosanen-Hexatriacontane
AK102/103AA Retention TimeMarker StandardAK-102/103AA-RT $ 25 / 1 x 1 mLAK-102/103AA-RT-PAK SAVE 20% $ 100 / 5 x 1 mL50 µg/mL each in CH2Cl2 3 comps.
AK102/103AA Surrogate StandardAK-102/103AA-SS $ 35 / 1 x 1 mLAK-102/103AA-SS-PAK SAVE 20% $ 140 / 5 x 1 mL1000 µg/mL each in CH2Cl2 3 comps.
n-Hexacosanen-Octacosanen-Triacontanen-Dotriacontanen-Tetratriacontane
AK103AA RRO StandardAK-103AA-RRO $ 35 / 1 x 1 mLAK-103AA-RRO-PAKSAVE 20% $ 140 / 5 x 1 mL50 µg/mL each in CH2Cl2 9 comps.
84 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
TLUFT/LUST
Alaska
Connecticut Method Extractable Total Petroleum Hydrocarbon
California Method
Arizona Method Determination of Diesel Range and Oil Range Organic Hydrocarbons
n-Dotriacontane
n-Octacosanen-Triacontanen-Dotriacontanen-Tetratriacontanen-Hexatriacontane
n-Octadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosane
n-Nonanen-Decanen-Dodecanen-Tetradecanen-Hexadecane
Technical Note
CT ETPH Alkane StandardDRH-009S $ 35 / 1 x 1 mLDRH-009S-PAK SAVE 20% $ 140 / 5 x 1 mL1000 µg/mL in CH2Cl2 15 comps.
Internal StandardGRH-IS $ 15 / 1 x 1 mLGRH-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
5-alpha Androstane
Surrogate StandardGRH-SS $ 15 / 1 x 1 mLGRH-SS-PAK SAVE 20% $ 60 / 5 x 1 mL2.0 mg/mL in Acetone
o-Terphenyl (OTP)
LUFT/LUST StandardsState Methods
#2 Diesel 10W 30 Motor Oil
Stock Calibration StandardAZ-8015-SCS $ 40 / 1 x 1 mLAZ-8015-SCS-PAK SAVE 20% $ 160 / 1 x 1 mL10000 µg/mL each in CH2Cl2 2 comps.
n-Decanen-Docosane
Retention Time Verification StandardAZ-8015-RTV $ 25 / 1 x 1 mLAZ-8015-RTV-PAK SAVE 20% $ 100 / 1 x 1 mL2000 µg/mL each in CH2Cl2 3 comps.
n-Octadecanen-Tetracosanen-Tetradecanen-Triacontane
n-Eicosanen-Hexacosanen-Hexadecanen-Octacosane
n-Decanen-Dodecanen-Docosanen-Dotriacontane
Diesel & Oil Range StandardAZ-8015-DRO/ORO $ 40 / 1 x 1 mLAZ-8015-DRO/ORO-PAK SAVE 20% $ 160 / 5 x 1 mL2000 µg/mL each in CH2Cl2 12 comps.
Surrogate StandardsAK-102.0-SS-10X $ 15 / 1 x 1 mLAK-102.0-SS-10X-PAK SAVE 20% $ 60 / 5 x 1 mL2.0 mg/mL in Acetone
o-Terphenyl
MethanolM-8015B/5031-17 $ 20 / 1 x 1 mL10 mg/mL in Water
p-Xylenem-XyleneMtBE
m-Xylenep-Xylene
EthanolM-8015B/5031-11 $ 25 / 1 x 1 mL10 mg/mL in Water
TAME (2000 µg/mL)t-Butanol (10000 µg/mL)
MtBE (2000 µg/mL)ETBE (2000 µg/mL)Isopropyl ether (2000 µg/mL)
Oxygenate Gasoline Additive StandardOGAD-001 $ 30 / 1 x 1 mLOGAD-001-PAK SAVE 20% $ 120 / 5 x 1 mLAt stated conc. in MeOH 5 comps.
1,4-DichlorobenzeneEthylbenzeneTolueneo-Xylene
BenzeneChlorobenzene1,2-Dichlorobenzene1,3-Dichlorobenzene
LA County Well Investigation & Monitoring ProgramPurgeable Aromatics - Gasoline IDM-602-GAS-10X $ 30 / 1 x 1 mL2.0 mg/mL each in MeOH 11 comps.
Tolueneo-Xylene
BenzeneEthylbenzeneMethyl t-butyl ether
California - Gasoline Range HydrocarbonsS-603A-10X $ 25 / 1 x 1 mLS-603A-10X-PAK SAVE 25% $ 90 / 5 x 1 mL2.0 mg/mL each in MeOH 7 comps.
85Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
Proficiency Test Samples required for the ETPH method andindividual fuels are available as standard products. Customformulations can be quoted and manufactured to meet yourspecific application.
LUFT/LUST Arizona
CaliforniaConnecticut
Multi-State Method Hydrocarbon Window DefiningMississippi / Tennessee Method
Florida Method Total Recoverable Petroleum Hydrocarbon (FTRPH) Standard & Surrogates
TetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontane
TritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontane
HeptadecanePristaneOctadecanePhytaneNonadecaneEicosaneHeneicosaneDocosaneTricosane
OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecane
GRH-SS $ 30 / 1 x 1 mLGRH-SS-PAK SAVE 20% $ 120 / 5 x 1 mL2.0 mg/mL in Acetone
o-Terphenyl (OTP)
Internal StandardGRH-IS $ 15 / 1 x 1 mLGRH-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
5-alpha Androstane
DRH-008S-R2 $ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.
LUFT/LUST StandardsState Methods
n-Heneicosanen-Docosanen-Tricosanen-Tetracosanen-Pentacosane
n-Dotriacontanen-Tetratriacontanen-Hexatriacontanen-Octatriacontanen-Tetracontane
FTRPH Combined Surrogate StandardDRH/GRH-FL-SS $ 50 / 1 x 1 mLDRH/GRH-FL-SS-PAK SAVE 20% $ 200 / 5 x 1 mL5.0 mg/mL in Carbon disulfide 2 comps.
Nonatriacontane o-Terphenyl (OTP)n-Eicosanen-Docosanen-Tetracosanen-Hexacosanen-Octacosanen-Triacontane
n-Octanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecane
FTRPH Calibration / Window Defining StandardDRH-FTRPH $ 35 / 1 x 1 mLDRH-FTRPH-PAK SAVE $ 150 / 5 x 1 mL500 µg/mL each in Hexane 17 comps.
FTRPH Surrogate StandardDRH-FL-SS-3X $ 25 / 1 x 1 mLDRH-FL-SS-3X-PAK SAVE 20% $ 100 / 5 x 1 mL3.0 mg/mL in Carbon disulfide
DRH-FL-SS $ 20 / 1 x 1 mLDRH-FL-SS-PAK SAVE 20% $ 80 / 5 x 1 mL1.0 mg/mL in Carbon disulfide
Nonatriacontane
Surrogate StandardsDRH-SS $ 30 / 1 x 1 mLDRH-SS-PAK SAVE 20% $ 120 / 5 x 1 mL5.0 mg/mL in THF
n-Triacontane-d62
Calibration/Window Defining Hydrocarbon StandardDRH-004S-5X $ 50 / 1 x 1 mLDRH-004S-5X-PAK SAVE 20% $ 200 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 : CS2 (1:1) 17 comps.
n-Hexadecanen-Heptadecanen-Octadecanen-Nonadecanen-Eicosane
n-Decanen-Undecanen-Dodecanen-Tridecanen-Tetradecanen-Pentadecane
DRO Defining MixAK-102.0-NAS-10X $ 40 / 1 x 1 mLAK-102.0-NAS-10X-PAK SAVE 20% $ 160 / 5 x 1 mL2.0 mg/mL each in CH2Cl2 16 comps.
86 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
The above FTRPH Calibration/Window Defining Standard wasformulated at a lower concentration to insure solubility of theanalytes & eliminate the odor caused by the introduction of Carbondisulfide as a cosolvent.
Technical Note
The above FTRPH Surrogate Standard was formulated at ahigher concentration for combined DRH & GRH analysis. Thisstandard has proven useful for those laboratories performinggasoline & diesel analysis simultaneously.
Technical Note
Dotriacontane C32
Tetratriacontane C34
Hexatricontane C36
Octatriacontane C38
Tetracontane C40
Eicosane C20
Docosane C22
Tetracosane C24
Hexacosane C26
Octacosane C28
Triacontane C30
Octane C8
Decane C10
Dodecane C12
Tetradecane C14
Hexadecane C16
Octadecane C18
AccuStandard offers a hydrocarbon window defining standard withthe C8 to C40 odd and even alkanes. Use of this one standard shouldmeet the numerous state-to-state variations for hydrocarbonvalidation and reporting. As an added benefit, AccuStandard hasincluded Pristane and Phytane in the formulation. Again, use of thisone standard can meet numerous LUFT/LUST programs requiringthat the C17 (Pristane) and C18 (Phytane) ratio be used to estimatesubsurface degradation of fuel oil spills.
Technical Note
LUFT/LUST Florida
Miss/TennMulti-State
DRH/GRH-FL-SS-R2 $ 50 / 1 x 1 mLDRH/GRH-FL-SS-R2-PAK SAVE 20% $ 200 / 5 x 1 mLAt stated conc. in Carbon disulfide 2 comps.
Nonatriacontane (6000 µg/mL) o-Terphenyl (OTP) (1500 µg/mL)
Items in Carbon disulfide cannot ship by Air. Whenever possiblewe try to find an alternate solvent, however some long chainhydrocarbon will not go in solution or any other solvent.
Technical Note
NEW
Massachusetts Method Determination of Extractable Petroleum Hydrocarbons (EPH)
n-OctacosanePyrenen-Tetradecane
Aliphatic SurrogateDRH-007-SS $ 15 / 1 x 1 mLDRH-007-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in Hexane
1-Chlorooctadecane
EPH Surrogate SpikeDRH-MA-SS 20 µg/mL each in Acetone $ 10 / 1 x 1 mLDRH-MA-SS-10X 200 µg/mL each in Acetone $ 20 / 1 x 1 mLDRH-MA-SS-100X 2,000 µg/mL each in Acetone $ 20 / 1 x 1 mLDRH-MA-SS-100X-PAK 2,000 µg/mL each in Acetone $ 100 / 5 x 1 mL
2 comps.1-Chlorooctadecane o-Terphenyl
Naphthalenen-Nonadecanen-Nonane
AcenaphtheneAnthraceneChrysenen-Eicosane
EPH Matrix SpikeDRH-MA-MS 25 µg/mL in Acetone $ 20 / 1 x 1 mLDRH-MA-MS-PAK 25 µg/mL in Acetone SAVE 20% $ 80 / 5 x 1 mL
DRH-MA-MS-10X 250 µg/mL in Acetone $ 30 / 1 x 1 mLDRH-MA-MS-10X-PAK 250 µg/mL in AcetoneSAVE 20% $ 120 / 5 x 1 mL
DRH-MA-MS-40X 1,000 µg/mL in Acetone $ 30 / 1 x 1 mLDRH-MA-MS-40X-PAK 1,000 µg/mL in AcetoneSAVE 20% $ 120 / 5 x 1 mL
10 comps.
n-Eicosanen-Docosanen-Tetracosanen-Hexacosanen-Octacosanen-Triacontanen-Hexatriacontane
n-Nonanen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Nonadecane
DEP (MA) - Aliphatic HydrocarbonsDRH-007S $ 40 / 1 x 1 mLDRH-007S-PAK SAVE 20% $ 160 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 : Hexane (1:1) 14 comps.
Aliphatic Hydrocarbons Calibration SetDRH-007-CAL-SET $ 125 / 5 x 1 mLAt stated conc. in CH2Cl2 15 comps.
LUFT/LUST StandardsState Methods - Ready-to-Inject Working Level EPH Standards
Dibenz[a,h]anthraceneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrene
AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChrysene
DEP (MA) - Aromatic HydrocarbonsDRH-006S $ 65 / 1 x 1 mLDRH-006S-PAK SAVE 20% $ 260 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 17 comps.
87Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
High ConcentratesAccuStandard formulated two high concentration EPHstocks for laboratories that prepare in-house working levelsolutions.
CCC Working LevelIn addition, AccuStandard received numerous requests toformulate Ready-to-Use working level aromatic andaliphatic calibration sets. AccuStandard's ProductDevelopment Team designed the two listed Calibrationsets to meet those requests.
Custom/Bulk PackagingLarger volumes of Daily Continuing Calibration solutioncan be purchased by contacting our Technical ServiceDepartment.
Technical Notes
Cat. No.
DRH-006-CAL-20X
DRH-006-CAL-40X
DRH-006-CAL-1X
DRH-006-CAL-4X
DRH-006-CAL-10X
Components Level 1 Level 2 Level 3 Level 4 Level 5(units in µg/mL) ( 1X ) ( 4X ) ( 10X ) ( 20X ) ( 40X )
Acenaphthene 5 20 50 100 200Acenaphthylene 5 20 50 100 200Anthracene 5 20 50 100 200Benz[a]anthracene 5 20 50 100 200Benzo[a]pyrene 5 20 50 100 200Benzo[b]fluoranthene 5 20 50 100 200Benzo[g,h,i]perylene 5 20 50 100 200Benzo[k]fluoranthene 5 20 50 100 200Chrysene 5 20 50 100 200Dibenz[a,h]anthracene 5 20 50 100 200Fluoranthene 5 20 50 100 200Fluorene 5 20 50 100 200Indeno[1,2,3-cd]pyrene 5 20 50 100 2002-Methylnaphthalene 5 20 50 100 200Naphthalene 5 20 50 100 200Phenanthrene 5 20 50 100 200Pyrene 5 20 50 100 200o-Terphenyl (Surrogate) 5 20 50 100 200
Aromatic Hydrocarbons Calibration SetDRH-006-CAL-SET $ 125 / 5 x 1 mLAt stated conc. in CH2Cl2 18 comps.
Cat. No.
DRH-007-CAL-20X
DRH-007-CAL-40X
DRH-007-CAL-1X
DRH-007-CAL-4X
DRH-007-CAL-10X
Components Level 1 Level 2 Level 3 Level 4 Level 5(units in µg/mL) ( 1X ) ( 4X ) ( 10X ) ( 20X ) ( 40X )
n-Nonane 5 20 50 100 200n-Decane 5 20 50 100 200n-Dodecane 5 20 50 100 200n-Tetradecane 5 20 50 100 200n-Hexadecane 5 20 50 100 200n-Octadecane 5 20 50 100 200n-Nonadecane 5 20 50 100 200n-Eicosane 5 20 50 100 200n-Docosane 5 20 50 100 200n-Tetracosane 5 20 50 100 200n-Hexacosane 5 20 50 100 200n-Octacosane 5 20 50 100 200n-Triacontane 5 20 50 100 200n-Hexatriacontane 5 20 50 100 2001-Chlorooctadecane (Surrogate) 5 20 50 100 200
LUFT/LUST Massachusetts
Massachusetts Method Determination of Volatile Petroleum Hydrocarbons (VPH)
Massachusetts Method Determination of Extractable Petroleum Hydrocarbons (EPH) (Continued)
m-Xylenep-Xylene
Certified BTEX in Unleaded GasolineGA-001-20X-BTEX $ 55 / 1 x 1 mL10.0 mg/mL in MeOH
Gasoline - Regular, unleaded
NaphthaleneTolueneo-Xylene
BenzeneEthylbenzeneMtBE
VPH Matrix SpikeGRH-004-MS $ 15 / 1 x 1 mLGRH-004-MS-PAK $ 60 / 5 x 1 mL50 µg/mL each in MeOH 8 comps.
GRH-004-MS-10X $ 25 / 1 x 1 mLGRH-004-MS-10X-PAK $ 100 / 5 x 1 mL500 µg/mL each in MeOH 8 comps.
GRH-004-MS-100X $ 25 / 1 x 1 mLGRH-004-MS-100X-PAK $ 100 / 5 x 1 mL5,000 µg/mL each in MeOH 8 comps.
n-Nonane (1,000 µg/mL)n-Pentane (1,000 µg/mL)Toluene (1,500 µg/mL)1,2,4-Trimethylbenzene (1,000 µg/mL)o-Xylene (1,000 µg/mL)m-Xylene (1,000 µg/mL)p-Xylene (1,000 µg/mL)
Benzene (500 µg/mL)2,5-Dibromotoluene(Surrogate) (1,000 µg/mL)Ethylbenzene (500 µg/mL)Isooctane (1,500 µg/mL)2-Methylpentane (1,500 µg/mL)MtBE (1,500 µg/mL)Naphthalene (1,000 µg/mL)
n-Pentane (10.0 mg/mL)Toluene (15.0 mg/mL)1,2,4-Trimethylbenzene (10.0 mg/mL)o-Xylene (10.0 mg/mL)m-Xylene (10.0 mg/mL)p-Xylene (10.0 mg/mL)
Benzene (5.0 mg/mL)Ethylbenzene (5.0 mg/mL)Isooctane (15.0 mg/mL)2-Methylpentane (15.0 mg/mL)MtBE (15.0 mg/mL)Naphthalene (10.0 mg/mL)n-Nonane (10.0 mg/mL)
DEP (MA)-VPH Surrogate StandardGRH-004-SS $ 10 / 1 x 1 mLGRH-004-SS-PAK SAVE 20% $ 40 / 5 x 1 mL50 µg/mL in MeOH
GRH-004-SS-10X $ 20 / 1 x 1 mLGRH-004-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL500 µg/mL in MeOH
GRH-004-SS-100X $ 20 / 1 x 1 mLGRH-004-SS-100X-PAK SAVE 20% $ 80 / 5 x 1 mL5,000 µg/mL in MeOH
2,5-Dibromotoluene
Stock ConcentrateVolatile Petroleum Hydrocarbon MixGRH-004S-10X $ 40 / 1 x 1 mLGRH-004S-10X-PAK SAVE 20% $ 160 / 5 x 1 mLAt stated conc. in MeOH 13 comps.
Volatile Petroleum Hydrocarbons with Surrogate StandardGRH-004S/SS $ 30 / 1 x 1 mLGRH-004S/SS-PAK SAVE 20% $ 120 / 5 x 1 mLAt stated conc. in MeOH 14 comps.
LUFT/LUST StandardsState Methods
DEP (MA) - Fractionation Surrogate SpikeDRH-MA-FSS-10ML 40 µg/mL in Hexane $ 25 / 1 x 10 mL
DRH-MA-FSS-50X 2.0 mg/mL in Hexane $ 25 / 1 x 1 mLDRH-MA-FSS-50X-PAK 2.0 mg/mL in HexaneSAVE 20% $ 100 / 5 x 1 mL
2 comps.2-Fluorobiphenyl 2-Bromonaphthalene
n-Hexacosanen-Hexadecanen-HexatriacontaneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenen-Nonadecanen-Nonanen-Octacosanen-OctadecanePhenanthrenePyrenen-Tetracosanen-Tetradecanen-Triacontane
AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChrysenen-DecaneDibenz[a,h]anthracenen-Docosanen-Dodecanen-EicosaneFluorantheneFluorene
Combined Aromatic/AliphaticMatrix Spike StandardDRH-MS-ASL $ 45 / 1 x 1 mLDRH-MS-ASL-PAK SAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 31 comps.
Internal StandardGRH-IS 1,000 µg/mL in CH2Cl2 $ 15 / 1 x 1 mL
GRH-IS-PAK 1,000 µg/mL in CH2Cl2 SAVE 20% $ 60 / 5 x 1 mL
GRH-IS-10X 10.0 mg/mL in CH2Cl2 $ 30 / 1 x 1 mL
5-alpha Androstane
Aromatic SurrogateDRH-006-SS $ 15 / 1 x 1 mLDRH-006-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
o-Terphenyl
88 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
Calibration CurveAnalytical chemists can easily develop the VPH Calibration Curveusing one AccuStandard primary dilution standard that includes thesurrogate.
Simultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene,toluene, ethyl benzene and xylene concentrations in our unleadedgasoline standard (GA-001-20X-BTEX). Use of this standard allowsthe analytical chemist in a single injection to verify that the QA/QCrequirements are being met for the BTEX analytes as well as thegasoline.
AccuStandard's Product Development Team continues to look forinnovative approaches to save the analytical laboratory time andmoney.
Technical Notes
LUFT/LUST Massachusetts
Texas Method Storage Tank (PST) Division - TX Method 1005 Standards
Pennsylvania Method Storage Tank Site Closure & Monitoring Petroleum Standards
n-Octacosanen-Octanen-Pentatriacontane
n-Heptanen-Hexadecanen-Hexane
n-Decanen-Dodecanen-Heneicosane
Carbon Number Distribution MakerDRH-TX-003-CNM $ 30 / 1 x 1 mLDRH-TX-003-CNM-PAK SAVE 20% $ 120 / 5 x 1 mL2000 µg/mL each in Pentane 9 comps.
Gasoline & Diesel Calibration CurveDRH-TX-003-SET $ 125 / 8 x 1 mLEach mix contains: Regular, Unleaded Gasoline & #2 Diesel Fuel
Cat. No. Conc. SolventDRH-TX-003-0.04X 20 µg/mL PentaneDRH-TX-003-0.2X 100 µg/mL PentaneDRH-TX-003-0.5X 250 µg/mL PentaneDRH-TX-003-1X 500 µg/mL PentaneDRH-TX-003-1.5X 750 µg/mL PentaneDRH-TX-003-2X 1000 µg/mL PentaneDRH-TX-003-10X 5000 µg/mL PentaneDRH-TX-003-20X 10000 µg/mL Pentane
NaphthalenePhenanthrenePyreneToluene1,2,3-Trimethylbenzenem-Xylenep-Xyleneo-Xylene
Benzo[e]pyreneBenzo[g,h,i]peryleneChryseneDibenz[a,h]anthraceneEthylbenzeneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene
AcenaphtheneAcenaphthyleneAnthraceneBenzeneBenz[a]anthraceneBenzo[b]fluorantheneBenzo[k]fluorantheneBenzo[a]pyrene
Aromatic Fractionation Check StandardDRH-TX-003-FCS $ 55 / 1 x 10 mLDRH-TX-003-FCS-PAK SAVE 20% $ 220 / 5 x 10 mL20 µg/mL each in Pentane 24 comps.
1-Chlorooctadecane 1-Chlorooctane
Surrogate StandardDRH-TX-003-SS1 $ 35 / 1 x 5 mLDRH-TX-003-SS1-PAK SAVE 20% $ 175 / 5 x 5 mL10 mg/mL each in Pentane 2 comps.
n-Docosanen-Tetracosanen-Hexacosanen-Octacosane
LUFT/LUST StandardsState Methods
o-Xylene (1000 µg/mL)m-Xylene (1000 µg/mL)p-Xylene (1000 µg/mL)Isopropylbenzene (1000 µg/mL)
Benzene (1000 µg/mL)Ethylbenzene (1000 µg/mL)MtBE (2000 µg/mL)Naphthalene (1000 µg/mL)Toluene (1000 µg/mL)
NaphthalenePhenanthrene
Benz[a]anthraceneBenzo[a]pyreneFluorene
n-Tetradecanen-Hexadecanen-Octadecanen-Eicosane
n-Hexanen-Octanen-Decanen-Dodecane
Stock Gasoline/Diesel Calibration SolutionDRH-TX-002-D-40X $ 25 / 1 x 1 mLDRH-TX-002-D-40X-PAK SAVE 20% $ 100 / 5 x 1 mL20,000 µg/mL each in CH2Cl2 2 comps.
Gasoline - Regular, unleaded #2 Diesel Fuel
Stock Hydrocarbon Calibration StandardDRH-TX-001-10X $ 25 / 1 x 1 mLDRH-TX-001-10X-PAK SAVE 20% $ 100 / 5 x 1 mL2000 µg/mL each in n-Pentane 12 comps.
Gasoline/Diesel Calibration/Matrix Spike SolutionDRH-TX-002-10X $ 25 / 1 x 1 mLDRH-TX-002-10X-PAK SAVE 20% $ 100 / 5 x 1 mL5000 µg/mL each in MeOH 2 comps.
Gasoline - Regular, unleaded #2 Diesel Fuel
PA Volatile Petroleum StandardGRH-PA-001 $ 25 / 1 x 1 mLGRH-PA-001-PAK SAVE 20% $ 100 / 5 x 1 mLAt stated conc. in MeOH 9 comps.
PA Extractable PAH StandardDRH-PA-001 $ 25 / 1 x 1 mLDRH-PA-001-PAK SAVE 20% $ 100 / 5 x 1 mL2000 µg/mL each in CH2Cl2 5 comps.
89Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
Texas Method 1005 Rev. 03 and 1006Over 22,000 notifications of leaking petroleum storage tanks have been received by the Texas Natural Resource Conservation Commission. At least 8000 of these leaks haveaffected groundwater resulting in the testing and monitoring of the site. The capability to test for TPH concentration and identify the petrochemical product offers analyticallaboratories additional sources of revenue.
New State specific methods have been proposed and promulgated to determine the Total concentration of Petroleum Hydrocarbons (TPH). AccuStandard continues to supportthe analytical community by developing these new formulations to meet both TNRCC method 1005 Rev. 3.0 and 1006. Additionally, QA/QC and Proficiency Testing samples arenow available to monitor sample handling/testing procedures or to receive certification to perform TPH analysis.
These new standards are in ready to use calibration curves, cost effective bulk quantities, and convenient concentrations to simplify the instrument calibration procedures.
Technical Notes
Gasoline & Diesel Calibration SetDRH-TX-002-D-SET $ 75 / 8 x 1 mLEach mix contains: Regular, Unleaded Gasoline & #2 Diesel Fuel
Cat. No. Conc. SolventDRH-TX-002-D-0.01X 5 µg/mL CH2Cl2DRH-TX-002-D-0.04X 20 µg/mL CH2Cl2DRH-TX-002-D-0.1X 50 µg/mL CH2Cl2DRH-TX-002-D-0.2X 100 µg/mL CH2Cl2DRH-TX-002-D-0.4X 200 µg/mL CH2Cl2DRH-TX-002-D-1X 500 µg/mL CH2Cl2DRH-TX-002-D-2X 1000 µg/mL CH2Cl2DRH-TX-002-D-10X 5000 µg/mL CH2Cl2
Gasoline/Diesel Continuing Calibration SolutionDRH-TX-002-D-0.4X-10ML $ 50 / 1 x 10 mL200 µg/mL each in CH2Cl2 2 comps.
Gasoline - Regular, unleaded #2 Diesel Fuel
LUFT/LUST Penn
Texas
Washington Method Determination of Volatile Petroleum Hydrocarbons (VPH)
Washington EPH Standards on Next Page
n-Decanen-Dodecanen-Tridecane
n-Pentanen-Hexanen-Octane
LUFT/LUST StandardsState Methods
n-Hexanen-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-Trimethylbenzene
BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentane
n-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-Trimethylbenzene2,5-Dibromotoluene (surrogate)
BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentanen-Hexane
n-Hexanen-Octanen-Decanen-Dodecane1-MethylnaphthaleneNaphthalene1,2,3-Trimethylbenzene
BenzeneEthylbenzeneTolueneo-Xylenem-Xylenep-XyleneMtBEn-Pentane
1,2,3-Trimethylbenzene StandardV-028S-D-10X $ 20 / 1 x 1 mLV-028S-D-10X-PAK SAVE 20% $ 80 / 5 x 1 mL1000 µg/mL each in CH2Cl2
1,2,3-Trimethylbenzene
VPH Retention Time MarkerWA-VPH-RT $ 20 / 1 x 1 mLWA-VPH-RT-PAK SAVE 20% $ 80 / 5 x 1 mL2,000 µg/mL each in MeOH 6 comps.
VPH Matrix SpikeWA-VPH-MS $ 25 / 1 x 1 mLWA-VPH-MS-PAK SAVE 20% $ 100 / 5 x 1 mLVaried conc. in MeOH 11 comps.
Benzene (60 µg/mL)Ethylbenzene (60 µg/mL)MTBE (180 µg/mL)Naphthalene (360 µg/mL)n-Nonane (200 µg/mL)n-Pentane (600 µg/mL)Toluene (60 µg/mL)1,2,3-Trimethylbenzene (60 µg/mL)m-Xylene (60 µg/mL)p-Xylene (60 µg/mL)o-Xylene (60 µg/mL)
VPH Primary Dilution Standardwith SurrogateWA-VPH-10X-SS $ 35 / 1 x 1 mLWA-VPH-10X-SS-PAKSAVE 20% $ 140 / 5 x 1 mL2,000 µg/mL each in MeOH 16 comps.
Stock Concentrate VPH SolutionsWA-VPH-10X $ 30 / 1 x 1 mLWA-VPH-10X-PAK SAVE 20% $ 120 / 5 x 1 mL2,000 µg/mL each in MeOH 15 comps.
WA-VPH-100X $ 35 / 1 x 1 mLWA-VPH-100X-PAK SAVE 20% $ 140 / 5 x 1 mL20.0 mg/mL each in MeOH 15 comps.
VPH SolutionWA-VPH $ 30 / 1 x 1 mLWA-VPH-PAK SAVE 20% $ 120 / 5 x 1 mL200 µg/mL each in MeOH 15 comps.
Certified BTEX in Gasoline Composite Mix (Multi Source)AK-101.0-GCS-BTEX $ 55 / 1 x 1 mL5 mg/mL each in MeOH 3 comps.
Gasoline - Premium (1.66 mg/mLGasoline - Regular, leaded (1.67 mg/mL)Gasoline - Regular, unleaded (1.67 mg/mL)
Certified BTEX in Unleaded Gasoline (Single Source)GA-001-20X-BTEX $ 55 / 1 x 1 mL10.0 mg/mL in MeOH
Gasoline - Regular, unleaded
VPH Surrogate StandardGRH-004-SS $ 10 / 1 x 1 mLGRH-004-SS-PAK SAVE 20% $ 40 / 5 x 1 mL50 µg/mL in MeOH
GRH-004-SS-10X $ 20 / 1 x 1 mLGRH-004-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL500 µg/mL in MeOH
GRH-004-SS-100X $ 20 / 1 x 1 mLGRH-004-SS-100X-PAKSAVE 20% $ 80 / 5 x 1 mL5,000 µg/mL in MeOH
2,5-Dibromotoluene
90 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
Simultaneous BTEX / Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene, toluene, ethylbenzene and xylene concentrations in our unleaded gasoline Standard.(GA-001-20X-BTEX and in AK-101.0-GCS-BTEX). Use of either standard allowsthe analytical chemist in a single injection to verify that the QA/QC requirementsare being met for the BTEX analytes as well as for the gasoline.
Since formulating the Standards for the TPH methods and because of numerouslaboratory requests, we have added a new multi source certified BTEX ingasoline composite mix (AK-101.0-GCS-BTEX). The BTEX values for this multisource calibration standard have been determined through in-house analysisagainst a BTEX multi level calibration curve.
AccuStandard's Product Development Team continues to look for innovativeapproaches to save the analytical laboratory time and money.
Technical Notes
LUFT/LUST Washington
Wisconsin Method
Washington Method Determination of Extractable Petroleum Hydrocarbons (EPH)
BenzeneEthylbenzeneMtBENaphthaleneToluene
1,2,4-Trimethylbenzene1,3,5-Trimethylbenzeneo-Xylenem-Xylenep-Xylene
Wisconsin DNR - Gasoline Range HydrocarbonsGRH-003S $ 35 / 1 x 1 mLGRH-003S-PAK SAVE 20% $ 140 / 5 x 1 mL2.0 mg/mL each in MeOH 10 comps.
AcenaphtheneAnthraceneBenzo[g,h,i]peryleneBenzo[a]pyrenen-Decanen-Dodecanen-Hexadecanen-HeneicosaneNaphthalenePyrene
Pyrene1,2,3-TrimethylbenzeneToluene
Pyrene1,2,3-Trimethylbenzene
Indeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrenen-Decanen-Dodecanen-Tetradecanen-Hexadecanen-Octadecanen-Eicosanen-Heneicosane
AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneDibenz[a,h]anthraceneFluorantheneFluorene
Dibenz[a,h]anthraceneFluorantheneFluoreneIndeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrene1,2,3-Trimethylbenzene
AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChrysene
LUFT/LUST StandardsState Methods
AcenaphtheneBenzo[g,h,i]peryleneNaphthalene
n-Hexadecanen-Heneicosane
n-Octanen-Decanen-Dodecane
Indeno[1,2,3-cd]pyrene2-MethylnaphthaleneNaphthalenePhenanthrenePyrenen-Octanen-Decanen-Dodecanen-Hexadecanen-Heneicosanen-Tetratriacontane
AcenaphtheneAcenaphthyleneAnthraceneBenz[a]anthraceneBenzo[a]pyreneBenzo[b]fluorantheneBenzo[g,h,i]peryleneBenzo[k]fluorantheneChryseneDibenz[a,h]anthraceneFluorantheneFluorene
Revised EPH Fractionation CheckSolutionWA-EPH-FCS-R1 $ 45 / 1 x 1 mLWA-EPH-FCS-R1-PAKSAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 23 comps
AcenaphtheneBenzo[g,h,i]peryleneNaphthalene
Revised EPH AromaticCheck MixWA-EPH-ARO-R1 $ 30 / 1 x 1 mLWA-EPH-ARO-R1-PAK $ 120 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 6 comps.
n-Hexadecanen-Heneicosanen-Tetratriacontane
n-Octanen-Decanen-Dodecane
Revised EPH AliphaticCheck MixWA-EPH-ALI-R1 $ 20 / 1 x 1 mLWA-EPH-ALI-R1-PAK SAVE 20% $ 80 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 6 comps.
EPH Matrix SpikeWA-EPH-MS2-20ML $ 30 / 1 x 20 mLWA-EPH-MS2-20ML-PAK25 µg/mL each in Acetone 10 comps.
1,2,3-Trimethylbenzene StandardV-028S-D-10X $ 20 / 1 x 1 mLV-028S-D-10X-PAK SAVE 20% $ 80 / 5 x 1 mL1000 µg/mL each in CH2Cl2
1,2,3-Trimethylbenzene
Internal StandardGRH-IS $ 15 / 1 x 1 mL1,000 µg/mL in CH2Cl2GRH-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1,000 µg/mL in CH2Cl2GRH-IS-10X $ 30 / 1 x 1 mL10.0 mg/mL in CH2Cl2
5-alpha Androstane
Aliphatic SurrogateDRH-007-SS $ 15 / 1 x 1 mLDRH-007-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in Hexane
1-Chlorooctadecane
EPH Surrogate SpikeDRH-MA-SS $ 10 / 1 x 1 mL20 µg/mL each in Acetone 2 comps.DRH-MA-SS-10X $ 20 / 1 x 1 mL200 µg/mL each in Acetone 2 comps.
DRH-MA-SS-100X $ 20 / 1 x 1 mLDRH-MA-SS-100X-PAK SAVE 20% $ 80 / 5 x 1 mL2,000 µg/mL each in Acetone 2 comps.
1-Chlorooctadecane o-Terphenyl
EPH Fractionation Check SolutionWA-EPH-FCS $ 45 / 1 x 1 mLWA-EPH-FCS-PAK SAVE 20% $ 180 / 5 x 1 mL25 µg/mL each in Hexane 24 comps.
EPH Aromatic Check MixWA-EPH-ARO $ 30 / 1 x 1 mLWA-EPH-ARO-PAKSAVE 20% $ 120 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 5 comps.
EPH Aliphatic Check MixWA-EPH-ALI $ 20 / 1 x 1 mLWA-EPH-ALI-PAK SAVE 20% $ 80 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 5 comps.
EPH Aromatic/PAH StandardWA-EPH-10X $ 75 / 1 x 1 mLWA-EPH-10X-PAK SAVE 20% $ 300 / 5 x 1 mL1.0 mg/mL each in CH2Cl2 18 comps.
91Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUSTLUFT/LUST
WashingtonWisconsin
Aromatic SurrogateDRH-006-SS $ 15 / 1 x 1 mLDRH-006-SS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
o-Terphenyl
TPH-SET $ 535 / 33 x 1 mL (includes TPH-001-SET, TPH-002-SET, TPH-003-SET, TPH-004-SET)
Motor Oil & Weathered Fuels Standards on Next Page
LUFT/LUST Standards
Aviation Fuels & Oils SetTPH-003-SET $ 160 / 10 x 1 mL (Set includes Cat. No.'s listed in Bold)
Heating Fuel Oils SetTPH-002-SET $ 115 / 7 x 1 mL (Set includes Cat. No.'s listed in Bold)
Motor Fuels & Lubricating Oils SetTPH-001-SET $ 180 / 11 x 1 mL (Set includes Cat. No.'s listed in Bold)
Complete Set of Total Petroleum Hydrocarbon (TPH) Pattern Recognition Standards
AccuStandard has assembled the following sets to identify specific petroleum product types found during LUFT/LUST investigations. The setscan be purchased using one convenient Cat. No. or as individuals.
Household & Industrial Solvent SetTPH-004-SET $ 80 / 5 x 1 mL (Set includes Cat. No.'s listed in Bold)
92 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
#1 Fuel Oil 0.5 MeOH FU-001 $ 1020 MeOH FU-001-40X 2020 CH2Cl2 FU-001-D-40X 20
#2 Fuel Oil 0.5 MeOH FU-002 1020 MeOH FU-002-40X 2020 CH2Cl2 FU-002-D-40X 20
#3 Fuel Oil 0.5 Hexane FU-003 1020 Hexane FU-003-40X 2020 CH2Cl2 FU-003-D-40X 20
#4 Fuel Oil 0.5 Hexane FU-004 1020 Hexane FU-004-40X 2020 CH2Cl2 FU-004-D-40X 20
#5 Fuel Oil 0.5 Hexane FU-007 1020 Hexane FU-007-40X 2020 CH2Cl2 FU-007-D-40X 20
#6 Fuel Oil 0.5 Hexane FU-008 1020 Hexane FU-008-40X 2020 CH2Cl2 FU-008-D-40X 20
Kerosene 0.5 MeOH FU-005 1020 MeOH FU-005-40X 2020 CH2Cl2 FU-005-D-40X 20
Aviation (gas) 0.5 MeOH GA-004 $ 10Grade 100 LL 20 MeOH GA-004-40X 20
20 CH2Cl2 GA-004-D-40X 20JP-4 Fuel 0.5 MeOH FU-010 10
20 MeOH FU-010-40X 2020 CH2Cl2 FU-010-D-40X 20
JP-5 Fuel 0.5 MeOH FU-012 1020 MeOH FU-012-40X 2020 CH2Cl2 FU-012-D-40X 20
JP-7 Fuel 0.5 MeOH FU-014 1020 MeOH FU-014-40X 2020 CH2Cl2 FU-014-D-40X 20
JP-8 Fuel 0.5 MeOH FU-015 1020 MeOH FU-015-40X 2020 CH2Cl2 FU-015-D-40X 20
JP-10 Fuel 0.5 MeOH FU-022 10(Cruise Missile) 20 MeOH FU-022-40X 20
20 CH2Cl2 FU-022-D-40X 20JP-TS 0.5 MeOH FU-016 10
20 MeOH FU-016-40X 2020 CH2Cl2 FU-016-D-40X 20
Jet Fuel (type 1) 0.5 MeOH FU-011 1020 MeOH FU-011-40X 2020 CH2Cl2 FU-011-D-40X 20
Turbine (Jet A) Fuel 0.5 MeOH FU-006 1020 MeOH FU-006-40X 2020 CH2Cl2 FU-006-D-40X 20
Hydraulic oil 0.5 Hexane FU-020-H 1020 Hexane FU-020-H-40X 2020 CH2Cl2 FU-020-D-40X 20
Lacquer thinner 1 gram Neat HS-001N $ 100.5 MeOH HS-001S 10
20.0 MeOH HS-001S-40X 2020.0 CH2Cl2 HS-001S-D-40X 20
Mineral spirits 1 gram Neat HS-002N 100.5 MeOH HS-002S 10
20.0 MeOH HS-002S-40X 2020.0 CH2Cl2 HS-002S-D-40X 20
Naphtha 1 gram Neat HS-003N 100.5 MeOH HS-003S 10
20.0 MeOH HS-003S-40X 2020.0 CH2Cl2 HS-003S-D-40X 20
Turpentine 1 gram Neat HS-004N 100.5 MeOH HS-004S 10
20.0 MeOH HS-004S-40X 2020.0 CH2Cl2 HS-004S-D-40X 20
Stoddard 1 gram Neat HS-005N 100.5 MeOH HS-005S 10
20.0 MeOH HS-005S-40X 2020.0 CH2Cl2 HS-005S-D-40X 20
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
LUFT/LUST TPH
Regular unleaded 0.5 MeOH GA-001 $ 1020 MeOH GA-001-40X 2020 CH2Cl2 GA-001-D-40X 20
Regular leaded 0.5 MeOH GA-002 1020 MeOH GA-002-40X 2020 CH2Cl2 GA-002-D-40X 20
Premium 0.5 MeOH GA-003 1020 MeOH GA-003-40X 2020 CH2Cl2 GA-003-D-40X 20
RFA Gasoline 0.5 MeOH GA-005 10(oxygenate free) 20 MeOH GA-005-40X 20
20 CH2Cl2 GA-005-D-40X 20#2 Diesel 0.5 MeOH FU-009 10(conventional) 20 MeOH FU-009-40X 20
20 CH2Cl2 FU-009-D-40X 20#1 Diesel 0.5 MeOH FU-013 10(low sulfur) 20 MeOH FU-013-40X 20
20 CH2Cl2 FU-013-D-40X 20#2 Diesel 0.5 MeOH FU-017 10(extra low sulfur) 20 MeOH FU-017-40X 20
20 CH2Cl2 FU-017-D-40X 20Arctic Diesel 0.5 MeOH FU-023 10
20 MeOH FU-023-40X 2020 CH2Cl2 FU-023-D-40X 20
SAE 30 W motor oil 0.5 Hexane FU-018-H 1020 Hexane FU-018-H-40X 2020 CH2Cl2 FU-018-D-40X 20
SAE 40 W motor oil 0.5 Hexane FU-019-H 1020 Hexane FU-019-H-40X 2020 CH2Cl2 FU-019-D-40X 20
SAE 50 W motor oil 0.5 Hexane FU-021-H 1020 Hexane FU-021-H-40X 2020 CH2Cl2 FU-021-D-40X 20
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
Weathered Fuels
SAE 10W 40 0.5 Hexane FU-027-H $ 10Motor Oil 20.0 Hexane FU-027-H-40X 20
20.0 CH2Cl2 FU-027-D-40X 20SAE 20W 50 0.5 Hexane FU-028-H 10Motor Oil 20.0 Hexane FU-028-H-40X 20
20.0 CH2Cl2 FU-028-D-40X 20
Total Petroleum Hydrocarbon Pattern Recognition StandardsThis book contains chromatography for the various petroleum products typically found duringLUFT/LUST site investigations. The chromatography shows each fuel pattern in a 25 minute analyticalrun for early eluting petroleum products like gasoline to late eluting products like motor oil. Inaddition, an n-alkane standard (DRH-008S) analyzed under identical conditions has been overlaid oneach petroleum product chromatogram. Use of the book will assist the chemist’s identification of thefuel for pattern recognition. The n-alkane standard (DRH-008S) overlay provides n-alkane reference points between the standardand the unknown sample. These beginning and ending n-alkane reference points can be used toestablish gross hydrocarbon concentrations. By comparing the specific n-alkane range of the closestidentified petroleum standard to that of the unknown sample, a reproducible gross hydrocarbon numbercan be achieved.
LUFT/LUST Standards
Weathered Gasoline SetWGU-SET $ 85 / 4 x 1 mLGasoline - Regular, unleaded 5.0 mg/mL in MeOH GA-001-10X $ 20 / 1 x 1 mLGasoline - Regular, unleaded (25% Weathered) 5.0 mg/mL in MeOH GA-W25-10X $ 25 / 1 x 1 mLGasoline - Regular, unleaded (50% Weathered) 5.0 mg/mL in MeOH GA-W50-10X $ 25 / 1 x 1 mLGasoline - Regular, unleaded (75% Weathered) 5.0 mg/mL in MeOH GA-W75-10X $ 25 / 1 x 1 mL
Weathered Kerosene SetWFK-SET $ 85 / 4 x 1 mLKerosene 5.0 mg/mL in CH2Cl2 FU-005-D-10X $ 20 / 1 x 1 mLKerosene (25% Weathered) 5.0 mg/mL in CH2Cl2 FK-W25-10X $ 25 / 1 x 1 mLKerosene (50% Weathered) 5.0 mg/mL in CH2Cl2 FK-W50-10X $ 25 / 1 x 1 mLKerosene (75% Weathered) 5.0 mg/mL in CH2Cl2 FK-W75-10X $ 25 / 1 x 1 mL
Weathered #2 Diesel (extra Low Sulfur Content) SetWFD2-SET $ 85 / 4 x 1 mL#2 Diesel fuel (extra Low Sulfur) 5.0 mg/mL in CH2Cl2 FU-017-D-10X $ 20 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (25% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W25-10X $ 25 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (50% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W50-10X $ 25 / 1 x 1 mL#2 Diesel fuel (extra Low Sulfur) (75% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W75-10X $ 25 / 1 x 1 mL
Weathered #2 Diesel (Conventional) SetWFD2-R1-SET $ 85 / 4 x 1 mL#2 Diesel fuel (Conventional) 5.0 mg/mL in CH2Cl2 FU-009-D-10X $ 20 / 1 x 1 mL#2 Diesel fuel (Conventional) (25% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W25-R1-10X $ 25 / 1 x 1 mL#2 Diesel fuel (Conventional) (50% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W50-R1-10X $ 25 / 1 x 1 mL#2 Diesel fuel (Conventional) (75% Weathered) 5.0 mg/mL in CH2Cl2 FD2-W75-R1-10X $ 25 / 1 x 1 mL
Motor Oil Standards
Weathered LUFT/LUST FuelsPetroleum Products contain many different chemicals, plus synthetic product additives. Typically, these petroleum products are subdivided intotwo groups based on their volatility: [a] gasoline related products (more volatile) and [b] fuel related products (less volatile such as kerosene,aviation fuels, diesel fuels and heating oils).Most analytical methods for petroleum products focus on several items: the level of BTEX, the total petroleum hydrocarbon number (TPH), andthe fingerprint of the petroleum product. Depending on the volatility of the petroleum product spilled, the nature of the contaminated soil, andthe age of the spill, analysis becomes even more difficult. Weathering, evaporation, and the migration of the lighter volatiles at the contaminationsite can affect the fingerprint identification portion of the fuel products analysis.AccuStandard designed the weathered fuel line to artificially mimic the weathering, evaporation, and migration process. Use of these standardscan help in the identification of the fuel type if it has been present in the ground for some time, in a sandy type soil with possible evaporationloss, or has migrated from the plume point of origin.
93Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
Motor Oil CompositeStandardMO-COMP-D-40X $ 30 / 1 x 1 mL5000 µg/mL each in CH2Cl2 4 comps.
5w30 Motor oil10w30 Motor oil10w40 Motor oil20w50 Motor oil
SAE 5W 30 0.5 Hexane FU-025-H $ 10Motor Oil 20.0 Hexane FU-025-H-40X 20
20.0 CH2Cl2 FU-025-D-40X 20SAE 10W 30 0.5 Hexane FU-026-H 10Motor Oil 20.0 Hexane FU-026-H-40X 20
20.0 CH2Cl2 FU-026-D-40X 20
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
Conc. 1 mLDescription (mg/mL) Solv. Cat. No. Price
LUFT/LUST TPHWeathered
Fuels
To Order:TPH BookBOOK-TPH $ 35
Gasoline Range Hydrocarbon Analysis
EthanolM-8015B/5031-11 $ 25 / 1 x 1 mL10 mg/mL in Water
MethanolM-8015B/5031-17 $ 20 / 1 x 1 mL10 mg/mL in Water
TAME (2000 µg/mL)t-Butanol (10000 µg/mL)
MtBE (2000 µg/mL)ETBE (2000 µg/mL)Isopropyl ether (2000 µg/mL)
Oxygenate Gasoline Additive StandardOGAD-001 $ 30 / 1 x 1 mLOGAD-001-PAK $ 120 / 1 x 1 mLAt stated conc. in MeOH 5 comps.
LUFT/LUST StandardsGasoline Range
Ethylbenzene (0.5 mg/mL)m-Xylene (1.0 mg/mL)p-Xylene (1.0 mg/mL)o-Xylene (1.0 mg/mL)1,2,4-Trimethylbenzene (1.0 mg/mL)
Tolueneo-Xylenep-Xylenem-XyleneMtBE
BenzeneChlorobenzene1,2-Dichlorobenzene1,3-Dichlorobenzene1,4-DichlorobenzeneEthylbenzene
Los Angeles County Well Investigation andMonitoring ProgramPurgeable Aromatics - Gasoline IDM-602-GAS-10X $ 30 / 1 x 1 mL2.0 mg/mL each in MeOH 11 comps.
Surrogate StandardGARH-SS $ 20 / 1 x 1 mL2.5 mg/mL in Acetone
4-Bromofluorobenzene
Internal StandardGARH-IS $15 / 1 x 1 mL1.0 mg/mL in CH2Cl2
Chloro-4-fluorobenzene
2-Methylpentane (1.5 mg/mL)2,2,4-Trimethylpentane (1.5 mg/mL)Heptane (0.5 mg/mL)Benzene (0.5 mg/mL)Toluene (1.5 mg/mL)
EPA Method - Gasoline Range HydrocarbonsGasoline StandardGRH-002S $ 25 / 1 x 1 mLAt stated conc. in MeOH 10 comps.
o-Xylenem-Xylenep-Xylene
BenzeneEthyl benzeneToluene
o-Xylenem-Xylenep-Xylene
BenzeneEthylbenzeneMethyl t-butyl etherToluene
1,2-DichloroethaneMethyl t-butyl ether
Dibromomethane1,2-Dibromoethane
BenzeneEthylbenzeneMtBENaphthaleneToluene
1,2,4-Trimethylbenzene1,3,5-Trimethylbenzeneo-Xylenem-Xylenep-Xylene
1,2,4-Trimethylbenzene2,2,4-Trimethylpentaneo-Xylenem-Xylenep-Xylene
BenzeneEthylbenzeneHeptane2-Methyl pentaneToluene
Hexadecane Extraction VolatilesCLP-BTEX $ 30 / 1 x 1 mLCLP-BTEX-PAK SAVE 20% $ 120 / 5 x 1 mL0.2 mg/mL each in MeOH 6 comps.
CLP-BTEX-10X $ 30 / 1 x 1 mLCLP-BTEX-10X-PAK SAVE 20% $ 120 / 5 x 1 mL2.0 mg/mL each in MeOH 6 comps.
Gasoline AdditivesGAD-001 $ 20 / 1 x 1 mLGAD-001-PAK SAVE 20% $ 80 / 5 x 1 mL0.2 mg/mL each in MeOH 4 comps.
Wisconsin DNR - Gasoline Range HydrocarbonsGRH-003S $ 35 / 1 x 1 mLGRH-003S-PAK SAVE 20% $ 140 / 5 x 1 mL2.0 mg/mL each in MeOH 10 comps.
California - Gasoline Range HydrocarbonsS-603A-10X $ 25 / 1 x 1 mLS-603A-10X-PAK SAVE 25% $ 90 / 5 x 1 mL2.0 mg/mL each in MeOH 7 comps.
Pennsylvania DER - Gasoline Range HydrocarbonsGRH-001S $ 25 / 1 x 1 mLGRH-001S-PAK SAVE 20% $ 100 / 1 x 1 mL1.0 mg/mL each in MeOH 10 comps.
Certified BTEX in Unleaded GasolineGA-001-20X-BTEX $ 55 / 1 x 1 mL10.0 mg/mL in MeOH
Regular unleaded gasoline
94 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
Simultaneous BTEX/Gasoline QA/QCAccuStandard's QA/QC department has certified the benzene,toluene, ethyl benzene and xylene concentrations in ourunleaded gasoline standard. Use of GA-001-20X-BTEX allowsthe analytical chemist in a single injection to verify that QA/QCrequirements are being met for the BTEX analytes as well asthe gasoline.
AccuStandard's Product Development Team continues to lookfor innovative approaches to save the analytical laboratory timeand money.
Technical Note
LUFT/LUST GRH
Complete Hydrocarbon Analysis
D-2887 Calibration Solution
Diesel Range Hydrocarbon Analysis
Octacosane (100 µg/mL)Dotriacontane (100 µg/mL)Hexatriacontane (100 µg/mL)Tetracontane (100 µg/mL)Tetratetracontane (100 µg/mL)
Dotriacontane C32
Tetratriacontane C34
Hexatriacontane C36
Octatriacontane C38
Tetracontane C40
n-Hexacosane C26
n-Octacosane C28
n-Tritriacontanen-Pentatriacontanen-Heptatriacontanen-Nonatriacontane
n-Hexatriacontanen-Octatriacontanen-Tetracontane
n-Docosane C22
n-Tetracosane C24
Hydrocarbon Window Defining Standard SetDRH-FTRPH-SET $ 80 / 2 x 1 mLDRH-FTRPH-SET-PAK SAVE 20% $ 320 / 5 (2 x 1 mL)500 µg/mL each in Hexane
Hydrocarbon Window Defining StandardDRH-FTRPH2 $ 45 / 1 x 1 mLDRH-FTRPH2-PAK SAVE 20% $ 180 / 5 x 1 mL500 µg/mL each in Hexane 18 comps.
n-Pentacosanen-Heptacosanen-Nonacosanen-Hentriacontane
PristanePhytanen-Nonadecanen-Heneicosanen-Tricosane
n-Nonanen-Undecanen-Tridecanen-Pentadecanen-Heptadecane
n-Octacosanen-Triacontanen-Dotriacontanen-Tetratriacontane
n-Octadecanen-Eicosanen-Docosanen-Tetracosanen-Hexacosane
n-Octanen-Decanen-Dodecanen-Tetradecanen-Hexadecane
FTRPH Calibration/Window Defining StandardDRH-FTRPH $ 35 / 1 x 1 mLDRH-FTRPH-PAK SAVE 15% $ 150 / 5 x 1 mL500 µg/mL each in Hexane 17 comps.
TetracosanePentacosaneHexacosaneHeptacosaneOctacosaneNonacosaneTriacontanen-HentriacontaneDotriacontane
TritriacontaneTetratriacontanePentatriacontaneHexatriacontaneHeptatriacontaneOctatriacontaneNonatriacontaneTetracontane
Phytane (2,6,10,14-Tetramethylhexadecane)Pristane (2,6,10,14-Tetramethylpentadecane)
HeptadecaneOctadecane
HeptadecanePristaneOctadecanePhytaneNonadecaneEicosaneHeneicosaneDocosaneTricosane
OctaneNonaneDecaneUndecaneDodecaneTridecaneTetradecanePentadecaneHexadecane
Multi-State Hydrocarbon Window Defining StandardDRH-008S-R2 $ 65 / 1 x 1 mLDRH-008S-R2-PAK SAVE 20% $ 260 / 5 x 1 mL500 µg/mL each in Chloroform 35 comps.
Internal StandardGRH-IS $ 15 / 1 x 1 mLGRH-IS-PAK SAVE 20% $ 60 / 5 x 1 mL1.0 mg/mL in CH2Cl2
5-alpha Androstane
Surrogate StandardGRH-SS $ 15 / 1 x 1 mLGRH-SS-PAK SAVE 20% $ 60 / 5 x 1 mL2.0 mg/mL in Acetone
o-Terphenyl (OTP)
Tetracosane C24
Hexacosane C26
Octacosane C28
Triacontane C30
LUFT/LUST StandardsDiesel Range
Column Test MixtureASTM-D2887 $ 10 / 1 x 1 mL1% v/v in n-Octane 2 comps.
n-Hexadecane n-Octadecane
Dodecane (1,200 µg/mL)Tetradecane (1,200 µg/mL)Hexadecane (1,000 µg/mL)Octadecane (500 µg/mL)Eicosane (200 µg/mL)Tetracosane (200 µg/mL)
Hexane (600 µg/mL)Heptane (600 µg/mL)Octane (800 µg/mL)Nonane (800 µg/mL)Decane (1,200 µg/mL)Undecane (1,200 µg/mL)
Calibration SolutionDRH-002S $ 45 / 1 x 1 mLAt stated conc. in CS2 17 comps.
n-Hexadecane C16
n-Octadecane C18
n-Eicosane C20
n-Decane C10
n-Dodecane C12
n-Tetradecane C14
EPA Method - Diesel Range HydrocarbonsDRH-001S $ 20 / 1 x 1 mL0.2 mg/mL each in CH2Cl2 : Hexane (1:1) 10 comps.
DRH-001S-10X $ 30 / 1 x 1 mL2.0 mg/mL each in CH2Cl2 : Hexane (1:1) 10 comps.
Surrogate StandardDRH-SS $ 30 / 1 x 1 mLDRH-SS-PAK SAVE 20% $ 120 / 5 x 1 mL5.0 mg/mL in THF
n-Triacontane-d62
Hexadecane C16
Octadecane C18
Eicosane C20
Docosane C22
Octane C8
Decane C10
Dodecane C12
Tetradecane C14
Calibration/Window Defining Hydrocarbon StandardDRH-004S-5X $ 50 / 1 x 1 mL1.0 mg/mL each in CH2Cl2 : CS2 (1:1) 17 comps.
95Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
AccuStandard offers a hydrocarbon window defining standardwith the C8 to C40 odd and even Alkanes. Use of this onestandard should meet the numerous State to State variations forhydrocarbon validation and reporting. As an added benefitAccuStandard included pristane and phytane in the formulation.Again, use of this one standard can meet numerous LUFT/LUSTprograms requiring that the C17/ pristane and C18/ phytane ratiobe used to estimate subsurface degradation of fuel oil spills.
If you prefer, AccuStandard has also developed a fuel oildegradation mixture containing just the four required analytes todetermine the C17/pristane and C18/ phytane ratio. Cat. No. DRH-005S-10X
Technical Note
LUFT/LUST DRH
n-Octadecane C18
n-Nonadecane C19
n-Eicosane C20
n-Decane C10
n-Undecane C11
n-Dodecane C12
n-Tridecane C13
n-Tetradecane C14
n-Pentadecane C15
n-Hexadecane C16
n-Heptadecane C17
Wisconsin Diesel Range HydrocarbonsDRH-003S $ 20 / 1 x 1 mL0.2 mg/mL each in Hexane 11 comps.
Fuel Oil Degradation/Retention Time Mixture forquantification of C17/Pristane and C18/Phytane ratiosDRH-005S-10X $ 20 / 1 x 1 mL2.0 mg/mL each in CH2Cl2 : CS2 (1:1) 4 comps.
New PT Samples Gasoline & DieselThe new Gasoline PT sample allows laboratories to test for gasoline TPH. This sample can also be used to test for the BTEXconcentrations so the lab can use this product for method 602, 8020, 8021 and 8015 modified. The sample can also be usedto reduce analytical bias by using the recommended calibration standard listed with the PT sample when conducting PT studies.AccuStandard is the one ISO 9001 standard manufacturer capable of supplying not only the PT sample(s), but also a widevariety of calibration standards to meet your specific TPH Method requirement.
LUFT/LUST Proficiency Test Samples
96 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
Petro PT Samples
LUFT/LUST PT
NEW
***
MTBETAME
WP-PT Oil, Grease & TPHIPE-OILG-001-AS $ 32 / 5 mLIPE-OILG-001-AT $ 32 / 5 mLIPE-OILG-001-AV $ 32 / 5 mLSample conc. after prepContains 2 analytes listed below
Analyte List Sample rangeTotal Oil & Grease † 5-100 mg/LTPH 5-100 mg/L
Oxygenate PT SampleWith MtBE contamination problems in drinking water, numerous statesare now requiring certification for Oxygenate monitoring. JoinAccuStandard’s next study for Oxygenate analysis. Our timely PTschedule easily allows your lab to be proactive in new regulatoryrequirements. The analytes in the standard and the PT sample havebeen drawn from the California list of known prevalent oxygenates ingasoline. These new Oxygenate PT samples and standards allow yourLab to:
• Expand testing capabilities• Generate new testing revenue• Eliminate standard preparation • Easily combine with other AccuStandard Volatile standards.
ETBEDiisopropylether
WS-PT OxygenatesOPE-OXY-001-AS $ 47 / 2 mLOPE-OXY-001-AT $ 47 / 2 mLOPE-OXY-001-AV $ 47 / 2 mLSample conc. after prep 5.0-50 µg/LContains 4 analytes listed below
Oil and GreaseWC-OILG-10X-1 $ 45 / 100 mL1000 µg/mL Total Oil and Grease in n-Propanol
Contains 500 µg/mL vegetable oil and 500 µg/mL of petroleum oil. Shakewell before use.
Suggested Calibration Standard
This PT sample can be used by gravimetric oil and greasemethods. In addition, it can also be used for TPH analysis bygravimetric methods including the EPA method 1664. Thesample contains real world material commonly found atpetroleum containment sites.
Technical Note
TAME (2000 µg/mL)t-Butanol (10000 µg/mL)
Oxygenate Gasoline Additive StandardOGAD-001 $ 30 / 1 x 1 mLOGAD-001-PAK SAVE 20% $ 120 / 5 x 1 mLAt stated conc. in MeOH 5 comps.
MtBE (2000 µg/mL)ETBE (2000 µg/mL)Isopropyl ether (2000 µg/mL)
Suggested Calibration Standard
† indicates these are included in the NVLAP Scope of Accreditation†† indicates kits. See individual Cat. No.s for Accreditation status of analytes
Lab Code 200389-0
QC
***
* Designed for NELAC/CA
Suffix Key"AS" = Formal PT Study"AT" = Pre-Test, Quick TAT"AV" = Values Included
Method 8440 Total Petroleum Hydrocarbon Analysis
Method 413.2 & 418.1 Total Petroleum Hydrocarbon Analysis by IR
Method 1664 Oil, Grease & Total Petroleum Hydrocarbon Determination
Total Petroleum HydrocarbonPattern Recognition StandardsThis book contains chromatography for thevarious petroleum products typically foundduring LUFT/LUST site investigations. Thechromatography shows each fuel pattern in a25 minute analytical run for early elutingpetroleum products like gasoline to lateeluting products like motor oil. In addition,an n-alkane standard (DRH-008S) analyzedunder identical conditions has been overlaidon each petroleum product chromatogram.Use of the book will assist the chemist’sidentification of the fuel for patternrecognition. The n-alkane standard (DRH-008S) overlay provides n-alkane referencepoints between the standard and the unknown sample. These beginning andending n-alkane reference points can be used to establish gross hydrocarbonconcentrations. By comparing the specific n-alkane range of the closestidentified petroleum standard to that of the unknown sample a reproduciblegross hydrocarbon number can be achieved. To Order, BOOK-TPH $ 35
Isooctane (37.5 vol %)Chlorobenzene (25.0 vol %)n-Hexadecane (37.5 vol %)
Isooctane (0.15 w/w %)Chlorobenzene (0.10 w/w %)n-Hexadecane (0.15 w/w %)
Isooctane (15.0)Chlorobenzene (10.0)n-Hexadecane (15.0)
Hexadecane (37.5)Chlorobenzene (25.0)Isooctane (37.5)
LUFT/LUST StandardsOil, Grease & TPH
Oil, Grease & Petroleum Hydrocarbon Concentrates MixM-418-CON $ 35 / 1 x 1 mL% by volume 3 comps.
Oil, Grease and Petroleum Hydrocarbon Total Recoverable (IR Method)M-418 $ 30 / 1 x 1 mLM-418-PAK SAVE 20% $ 120 / 5 x 1 mLTotal 4.15 mg/mL in Freon 113, (Parts by volume) 3 comps.
Total Petroleum Hydrocarbon Concentrate MixM-8440-CON $ 30 / 1 x 1 mLM-8440-CON-PAK SAVE 20% $ 120 / 5 x 1 mL
3 comps.
Total Recoverable Petroleum Hydrocarbon MixM-8440 $ 20 / 1 x 1 mLM-8440-PAK SAVE 20% $ 80 / 5 x 1 mLAt stated conc. in Tetrachloroethene 3 comps.
Precision and Recovery (PAR) Spiking SolutionM-1664-5ML $ 15 / 1 x 5 mLM-1664-5ML-PAK SAVE 20% $ 60 / 5 x 5 mL4.0 mg/mL each in Acetone 2 comps.
M-1664-20ML $ 25 / 1 x 20 mLM-1664-20ML-PAK SAVE 20% $ 100 / 5 x 20 mL4.0 mg/mL each in Acetone 2 comps.
Hexadecane Stearic acid
97Fax 203-786-5287 • Toll Free 800-442-5290 / 203-786-5290 • Website www.accustandard.com
LUFT/LUST
Technical NoteAccuStandard's Precison and Recovery (PAR) Spiking Solution wasdeveloped for the new Method 1664. This performance based method wasdeveloped to replace previous gravimetric procedures which incorporated Freon-113 as the extraction solvent for the determination of Oil and Greaseand Total Petroleum Hydrocarbons. Each standard is packaged in a flamesealed ampule conveniently sized for quality control of the analytical batch.
Retention Time StandardDRH-010S $ 20 / 1 x 1 mLDRH-010S-PAK SAVE 20% $ 80 / 5 x 1 mL25 µg/mL each in CH2Cl2 7 comps.
NEW
Leaking Underground Storage TankRetention Time StandardThis product can be used to screen a sample todetermine what type of petroleum spill that may havecaused the contamination.
n-Hexanen-Decanen-Dodecane
Silica Gel Cleanup Calibration SolutionM-8440-SGC $ 10 / 1 x 1 mLM-8440-SGC-PAK SAVE 20% $ 40 / 5 x 1 mL10.0 mg/mL in Tetrachloroethene
Corn Oil
n-Tetracosanen-Octacosane
Method 1664413 & 418
8440
A sample showing peaks in the C6-C10 range generallyindicates a gasoline spill. Samples with the peaks in the C24-C12 range are indicative of a diesel spill while samples withthe higher carbon numbers above C24 are typically oils orlubricants. Once the initial screen is complete, more detailedwork can be done to further identify the contaminant.
Technical Note
n-Triacontanen-Tetracontane
ASTM E-1618 Resolution Check Mix for Fire Debris Analysis
ASTM E-1387 Resolution Check Mix for Fire Debris Analysis
Skinner List for Refinery WasteMethod 1004 Carbonyl Compounds as DNPH deriv. by HPLC
98 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT
/LUS
T
n-TetradecaneToluene1,2,4-Trimethylbenzenep-Xylene
TetradecaneToluene1,2,4-Trimethylbenzenep-Xylene
n-Hexadecanen-Hexanen-Octadecanen-Octane
n-Decanen-Dodecanen-Eicosaneo-Ethyltoluenem-Ethyltoluene
Test Mix for Fire Debris AnalysisASTM-E1618 $ 35 / 1 x 1 mLASTM-E1618-PAK SAVE 20% $ 140 / 5 x 1 mL0.05% v/v (0.50 µL/mL) each in CH2Cl2 13 comps.
Butyraldehyde (500 µg/mL)Formaldehyde (1500 µg/mL)Propionaldehyde (500µg/mL)
Acetaldehyde (1000 µg/mL)Acetone (500 µg/mL)Acrolein (500 µg/mL)Benzaldehyde (500 µg/mL)
Volatiles
Semi-Volatiles
HexadecaneHexaneOctadecaneOctane
DecaneDodecaneEicosane2-Ethyltoluene3-Ethyltoluene
Resolution Check MixASTM-E1387 $ 30 / 1 x 1 mLASTM-E1387-PAK SAVE 20% $ 120 / 5 x 1 mL2.0 mg/mL each in CH2Cl2 13 comps.
Reference Gas Oil SampleRGS-001 $ 20 / 1 x 1 mL
Hydrocarbon Mixture(boiling point range 250-850 °F)
Carbonyl Compound DNPH Derivative
Acetaldehyde (3.0 µg/mL) (15.3 µg/mL)Acetone (3.0 µg/mL) (12.3 µg/mL)Acrolein (3.0 µg/mL) (12.7 µg/mL)Benzaldehyde (3.0 µg/mL) (8.1 µg/mL)2-Butanone (MEK) (3.0 µg/mL) (10.5 µg/mL)n-Butyraldehyde (3.0 µg/mL) (10.5 µg/mL)Crotonaldehyde (3.0 µg/mL) (10.7 µg/mL)Formaldehyde (3.0 µg/mL) (21.0 µg/mL)Hexanal (3.0 µg/mL) (8.4 µg/mL)Methacrolein (3.0 µg/mL) (10.7 µg/mL)Propionaldehyde (3.0 µg/mL) (12.3 µg/mL)m-Tolualdehyde (3.0 µg/mL) (7.5 µg/mL)Valeraldehyde (3.0 µg/mL) (9.3 µg/mL)
Carbonyl Compounds as DNPH deriv. by HPLCCalifornia Air Resources Board Method 1004M-1004 $ 25 / 1 x 1 mLAt stated conc. in AcCN 13 comps.
M-1004-10X $ 35 / 1 x 1 mLAt 10 times the stated conc. in AcCN 13 comps.
CAR-DNPH $ 20 / 1 x 1 mLAt stated conc. in AcCN as DNPH derivatives 7 comps.
Alcohol Oxidation Products in Automotive Engine Exhaust by HPLC of DNPH derivativesThe California Air Resources Board, in conjunction with some of the larger automobile manufacturers, has developed an HPLC method inwhich the 2,4-Dinitrophenylhydrazine derivatives of the by-products are quantitated.
BenzeneCarbon disulfideChlorobenzeneChloroform1,2-Dichloroethane1,4-DioxaneEthyl benzene
Ethylene dibromideMethyl ethyl ketoneStyreneTolueneo-Xylenem-Xylenep-Xylene
M-005V 0.2 mg/mL each in MeOH $ 35 / 1 x 1 mLM-005V-PAK 0.2 mg/mL each in MeOH SAVE 20% $ 140 / 5 x 1 mL
M-005V-10X 2.0 mg/mL each in MeOH $ 40 / 1 x 1 mLM-005V-10X-PAK 2.0 mg/mL each in MeOH SAVE 20% $ 160 / 5 x 1 mL
14 comps.
4-NitrophenolPhenolThiophenol
o-Cresolm-Cresolp-Cresol2,4-Dimethylphenol2,4-Dinitrophenol
Base/Neutral ExtractablesM-005B 0.2 mg/mL each in CH2Cl2 $ 150 / 1 x 1 mLM-005B-PAK 0.2 mg/mL each in CH2Cl2 SAVE 20% $ 600 / 5 x 1 mL
M-005B-10X 2.0 mg/mL each in CH2Cl2 $ 200 / 1 x 1 mLM-005B-10X-PAK 2.0 mg/mL each in CH2Cl2 SAVE 20% $ 1,000 / 5 x 1 mL
27 comps.
Acid ExtractablesM-005A 0.2 mg/mL each in CH2Cl2 $ 35 / 1 x 1 mLM-005A-PAK 0.2 mg/mL each in CH2Cl2 SAVE 20% $ 140 / 5 x 1 mL
M-005A-10X 2.0 mg/mL each in CH2Cl2 $ 40 / 1 x 1 mLM-005A-10X-PAK 2.0 mg/mL each in CH2Cl2 SAVE 20% $ 160 / 5 x 1 mL
8 comps.
LUFT/LUST StandardsAutomotive Engine Exhaust, Refinery Waste (Skinner List)
7,12-Dimethylbenz[a]anthraceneDimethyl phthalateDi-n-butyl phthalateDi-n-octyl phthalateIndene Fluoranthene6-Methylchrysene1-MethylnaphthaleneNaphthalenePhenanthrenePyrenePyridineQuinoline
AnthraceneBenzo[a]anthraceneBenzo[b]fluorantheneBenzo[k]fluorantheneBenzo[a]pyrenebis(2-Ethylhexyl)phthalateButyl benzyl phthalateChryseneDibenz[a,h]acridineDibenz[a,h]anthraceneo-Dichlorobenzenem-Dichlorobenzenep-DichlorobenzeneDiethyl phthalate
INDEX
AK-102AA-DRO 84AK-102AA-DRO-PAK 84AK-103.0-LCS 84AK-103.0-LCS-5X 84AK-103.0-LCS-5X-PAK 84AK-103.0-LCS-PAK 84AK-103.0-RCS 84AK-103.0-RCS-PAK 84AK-103.0-SS-PAK 84AK-103AA-RRO 84AK-103AA-RRO-PAK 84ASTM-D2887 14ASTM-D2887 95ASTM-D3710 20ASTM-D3710-PAK 20ASTM-E1387 98ASTM-E1387-PAK 98ASTM-E1618 98ASTM-E1618-PAK 98ASTM-FUEL-QCS-01-PAK 1,40ASTM-FUEL-QCS-02-PAK 1,40ASTM-P-0010-PAK 11ASTM-P-0020-PAK 11ASTM-P-0030 12,13ASTM-P-0031 13ASTM-P-0032 13ASTM-P-0033 13ASTM-P-0034 13ASTM-P-0035 13ASTM-P-0036 12ASTM-P-0037 12ASTM-P-0038 14ASTM-P-0050 15ASTM-P-0051N-2G 56ASTM-P-0051N-2G 15ASTM-P-0052 15ASTM-P-0052-PAK 15ASTM-P-0053N-2G 56ASTM-P-0053N-2G 15ASTM-P-0061-SET 37ASTM-P-0062-SET 37ASTM-P-0063-SET 37ASTM-P-0064-SET 37ASTM-P-0065-SET 37ASTM-P-0066-SET 37ASTM-P-0067-SET 37ASTM-P-0068-SET 37ASTM-P-0069-SET 37ASTM-P-0070-10X 23, 40ASTM-P-0070-1X 23, 40ASTM-P-0070-20X 23, 40ASTM-P-0070-2X 23, 40ASTM-P-0070-4X 23, 40ASTM-P-0070-BL 23, 40ASTM-P-0070-SET 23, 40ASTM-P-0071-01 23, 40ASTM-P-0071-02 23, 40ASTM-P-0071-03 23, 40ASTM-P-0071-BL 23, 40ASTM-P-0071-SET 23, 40ASTM-P-0080 55ASTM-P-0080-PAK 55ASTM-P-0081 55ASTM-P-0081-PAK 55ASTM-P-0082 55ASTM-P-0082-PAK 55ASTM-P-0082-R1 55ASTM-P-0082-R1-PAK 55ASTM-P-0090-01 66ASTM-P-0090-02 66ASTM-P-0090-03 66ASTM-P-0090-04 66ASTM-P-0090-05 66ASTM-P-0090-06 66ASTM-P-0090-07 66ASTM-P-0090-08 66ASTM-P-0090-09 66ASTM-P-0090-10 66
AA62N-10X-20ML 75AA62N-25X-20ML 75AA62N-5 75AA63H-1 75AA63H-5 75AA63N-10X-20ML 75AA63N-25X-20ML 75AA64W-1 75AA64W-10X-20ML 75AA64W-5 75AA65W-1 75AA65W-10X-20ML 75AA65W-5 75AA66N-1 75AA66N-5 75AA67N-1 26, 75AA67N-10X-20ML 75AA67N-25X-20ML 75AA67N-5 26, 75AA68N-1 75AA68N-10X-20ML 75AA68N-25X-20ML 75AA68N-5 75AA69N-1 75AA69N-10X-20ML 75AA69N-25X-20ML 75AA69N-5 75AA70N-1 75AA70N-10X-20ML 75AA70N-25X-20ML 75AA70N-5 75AA71N-1 75AA71N-10X-20ML 75AA71N-25X-20ML 75AA71N-5 75AK-101.0-GCS 82AK-101.0-GCS-BTEX 82, 90AK-101.0-GCS-PAK 82AK-101.0-IS-10X 82AK-101.0-IS-10X-PAK 82AK-101.0-LCS 82AK-101.0-LCS-PAK 82AK-101.0-NAS-10X 82AK-101.0-NAS-10X-PAK 82AK-101.0-SS 82AK-101.0-SS-100X 82AK-101.0-SS-100X-PAK 82AK-101.0-SS-10X 82AK-101.0-SS-10X-PAK 82AK-101.0-SS-PAK 82AK-101AA-ARO 82AK-101AA-ARO-PAK 82AK-101-GSC-R1 82AK-101-GSC-R1-PAK 82AK-102.0-DCS 83AK-102.0-DCS-10X 83AK-102.0-DCS-10X-PAK 83AK-102.0-DCS-PAK 83AK-102.0-DCS-R1-10X 83AK-102.0-DCS-R1-10X-PAK 83AK-102.0-IS 83AK-102.0-IS-PAK 83AK-102.0-LCS 83AK-102.0-LCS-10X 83AK-102.0-LCS-10X-PAK 83AK-102.0-LCS-PAK 83AK-102.0-LCS-R1-10X 83AK-102.0-LCS-R1-10X-PAK 83AK-102.0-NAS-10X 83, 86AK-102.0-NAS-10X-PAK 83, 86AK-102.0-SS 83AK-102.0-SS-10X 83, 85AK-102.0-SS-10X-PAK 83, 85AK-102.0-SS-PAK 83AK-102/103AA-RT 84AK-102/103AA-RT-PAK 84AK-102/103AA-SS 84AK-102/103AA-SS-PAK 84
AA42H-1 74AA42H-10X-20ML 74AA42H-25X-20ML 74AA42H-5 74AA43N-1 74AA43N-5 74AA43N-10X-20ML 74AA43N-25X-20ML 74AA44N-1 74AA44N-10X-20ML 74AA44N-25X-20ML 74AA44N-5 74AA45W-1 74AA45W-10X-20ML 74AA45W-25X-20ML 74AA45W-5 74AA46H-1 74AA46H-10X-20ML 74AA46H-25X-20ML 74AA46H-5 74AA47N-1 74AA47N-10X-20ML 74AA47N-25X-20ML 74AA47N-5 74AA48H-1 74AA48H-10X-20ML 74AA48H-25X-20ML 74AA48H-5 74AA49N-1 75AA49N-10X-20ML 75AA49N-25X-20ML 75AA49N-5 75AA50N-1 75AA50N-10X-20ML 75AA50N-25X-20ML 75AA50N-5 75AA51N-1 75AA51N-10X-20ML 75AA51N-25X-20ML 75AA51N-5 75AA52W-1 26, 75AA-52W-10X-20ML 75AA52W-5 26, 75AA53N-1 75AA53N-10X-20ML 75AA53N-25X-20ML 75AA53N-5 75AA54N-1 17, 75AA54N-5 17, 75AA54N-1 26AA54N-10X-20ML 75AA54N-25X-20ML 75AA54N-5 26AA55N-1 75AA55N-10X-20ML 75AA55N-25X-20ML 75AA55N-5 75AA56W-1 75AA56W-10X-20ML 75AA56W-25X-20ML 75AA56W-5 75AA57W-1 75AA57W-10X-20ML 75AA57W-25X-20ML 75AA57W-5 75AA58H-1 75AA58H-10X-20ML 75AA59N-1 75AA59N-10X-20ML 75AA59N-25X-20ML 75AA59N-5 75AA60N-1 75AA60N-10X-20ML 75AA60N-25X-20ML 75AA60N-5 75AA61N-1 75AA61N-5 75AA62N-1 75
AA22H-1 73AA22H-10X-20ML 73AA22H-25X-20ML 73AA22H-5 73AA23N-1 74AA23N-10X-20ML 74AA23N-25X-20ML 74AA23N-5 74AA24N-1 74AA24N-10X-20ML 74AA24N-25X-20ML 74AA24N-5 74AA25N-1 74AA25N-10X-20ML 74AA25N-25X-20ML 74AA25N-5 74AA26H-1 74AA26H-10X-20ML 74AA26H-5 74AA27N-1 74AA27N-5 74AA27N-1 26AA27N-10X-20ML 74AA27N-25X-20ML 74AA27N-5 26AA28N-1 74AA28N-10X-20ML 74AA28N-25X-20ML 74AA28N-5 74AA29N-1 74AA29N-10X-20ML 74AA29N-25X-20ML 74AA29N-5 74AA30N-1 17, 74AA30N-5 17, 74AA30N-10X-20ML 74AA30N-25X-20ML 74AA31N-1 74AA31N-10X-20ML 74AA31N-25X-20ML 74AA31N-5 74AA32N-1 74AA32N-5 74AA32N-10X-20ML 74AA32N-25X-20ML 74AA33N-1 74AA33N-5 74AA33N-10X-20ML 74AA33N-25X-20ML 74AA34N-1 74AA34N-10X-20ML 74AA34N-25X-20ML 74AA34N-5 74AA35W-1 74AA35W-10X-20ML 74AA35W-25X-20ML 74AA35W-5 74AA36N-1 74AA36N-10X-20ML 74AA36N-25X-20ML 74AA36N-5 74AA37N-1 26AA37N-1 74AA37N-10X-20ML 74AA37N-25X-20ML 74AA37N-5 26AA37N-5 74AA38W-1 74AA38W-10X-20ML 74AA38W-25X-20ML 74AA38W-5 74AA40H-1 74AA40H-10X-20ML 74AA40H-25X-20ML 74AA40H-5 74AA41W-1 74AA41W-10X-20ML 74AA41W-5 74
AA01N-1 73AA01N-5 73AA01N-1 26AA01N-10X-20ML 73AA01N-25X-20ML 73AA01N-5 26AA02N-1 73AA02N-5 73AA02W-10X-20ML 73AA03N-10X-20ML 73AA03N-25X-20ML 73AA03N-1 73AA03N-5 73AA04N-1 73AA04N-5 73AA04N-10X-20ML 73AA04N-25X-20ML 73AA05N-1 73AA05N-10X-20ML 73AA05N-5 73AA06N-1 73AA06N-10X-20ML 73AA06N-25X-20ML 73AA06N-5 73AA07W-1 73AA07W-10X-20ML 73AA07W-5 73AA08N-1 73AA08N-5 73AA08N-10X-20ML 73AA08N-25X-20ML 73AA09N-1 73AA09N-5 73AA09N-1 26AA09N-10X-20ML 73AA09N-25X-20ML 73AA09N-5 26AA11N-1 73AA11N-10X-20ML 73AA11N-25X-20ML 73AA11N-5 73AA12N-1 73AA12N-10X-20ML 73AA12N-25X-20ML 73AA12N-5 73AA13N-1 73AA13N-5 73AA13N-10X-20ML 73AA13N-25X-20ML 73AA14N-1 73AA14N-5 73AA14N-10X-20ML 73AA14N-25X-20ML 73AA15N-1 73AA15N-10X-20ML 73AA15N-25X-20ML 73AA15N-5 73AA16N-1 73AA16N-10X-20ML 73AA16N-25X-20ML 73AA16N-5 73AA17N-1 73AA17N-10X-20ML 73AA17N-25X-20ML 73AA18N-1 73AA18N-10X-20ML 73AA18N-25X-20ML 73AA18N-5 73AA19N-1 73AA19N-10X-20ML 73AA19N-25X-20ML 73AA19N-5 73AA20N-1 73AA20N-10X-20ML 73AA20N-5 73AA21W-1 73AA21W-10X-20ML 73AA21W-5 73
Catalog Number Index
i
INDE
XASTM-P-0120-22 65ASTM-P-0120-23 65ASTM-P-0120-SET 65ASTM-P-0121-01 65ASTM-P-0121-02 65ASTM-P-0121-03 65ASTM-P-0121-04 65ASTM-P-0121-05 65ASTM-P-0121-06 65ASTM-P-0121-07 65ASTM-P-0121-08 65ASTM-P-0121-09 65ASTM-P-0121-10 65ASTM-P-0121-11 65ASTM-P-0121-12 65ASTM-P-0121-13 65ASTM-P-0121-SET 65ASTM-P-0122-0.5 60, 65ASTM-P-0122-1 60, 65ASTM-P-0123-0.5 60, 65ASTM-P-0123-1 60, 65ASTM-P-0135 57ASTM-P-0135-PAK 57ASTM-P-0136-SET 57ASTM-P-0137N-2G 56ASTM-P-0137N-2G 15ASTM-P-0138N-2G 56ASTM-P-0138N-2G 15ASTM-P-0139 14ASTM-P-0140-01 51ASTM-P-0140-02 51ASTM-P-0140-03 51ASTM-P-0140-04 51ASTM-P-0140-05 51ASTM-P-0140-IS 51ASTM-P-0140-IS2 51ASTM-P-0140-IS2-PAK 51ASTM-P-0140-IS-PAK 51ASTM-P-0140-PES 51ASTM-P-0140-PES-PAK 51ASTM-P-0140-QC 51ASTM-P-0140-QC-PAK 51ASTM-P-124-01 32ASTM-P-124-01-VAP 29ASTM-P-124-02 32ASTM-P-124-02-VAP 29ASTM-P-124-03 32ASTM-P-124-03-VAP 29ASTM-P-124-04 32ASTM-P-124-04-VAP 29ASTM-P-124-05 32ASTM-P-124-05-VAP 29ASTM-P-124-06 32ASTM-P-124-06-VAP 29ASTM-P-124-07-VAP 29ASTM-P-125-01-VAP 29ASTM-P-125-02-VAP 29ASTM-P-126-01 3ASTM-P-126-SET 3ASTM-P-127-01 3ASTM-P-127-02 3ASTM-P-128-01 3ASTM-P-128-02 3ASTM-P-128-03 3ASTM-P-128-04 3ASTM-P-128-05 3ASTM-P-128-06 3ASTM-P-129-01 5ASTM-P-129-02 5ASTM-P-131-01 5ASTM-P-131-02 5ASTM-P-131-03 5ASTM-P-131-04 5ASTM-P-131-05 5ASTM-P-132-01 3ASTM-P-132-02 3ASTM-P-132-03 3ASTM-P-132-04 3ASTM-P-133-01 3ASTM-P-133-02 3ASTM-P-133-03 3ASTM-P-133-04 3ASTM-P-134-PAK 4ASTM-PIANO-SET 13ASTM-SSTD-A/B-SET 11ASTM-SSTDA-01 11ASTM-SSTDA-02 11ASTM-SSTDA-03 11ASTM-SSTDA-04 11ASTM-SSTDA-BL 11
ASTM-P-0115-17 64ASTM-P-0115-SET 64ASTM-P-0116-01 64ASTM-P-0116-02 64ASTM-P-0116-03 64ASTM-P-0116-04 64ASTM-P-0116-05 64ASTM-P-0116-06 64ASTM-P-0116-07 64ASTM-P-0116-08 64ASTM-P-0116-09 64ASTM-P-0116-10 64ASTM-P-0116-11 64ASTM-P-0116-SET 64ASTM-P-0117-01 58ASTM-P-0117-01 64ASTM-P-0117-02 58ASTM-P-0117-02 64ASTM-P-0117-03 58ASTM-P-0117-03 64ASTM-P-0117-04 58ASTM-P-0117-04 64ASTM-P-0117-05 58ASTM-P-0117-05 64ASTM-P-0117-06 58ASTM-P-0117-06 64ASTM-P-0117-07 58ASTM-P-0117-07 64ASTM-P-0117-08 58ASTM-P-0117-08 64ASTM-P-0117-09 58ASTM-P-0117-09 64ASTM-P-0117-10 58ASTM-P-0117-10 64ASTM-P-0117-SET 58ASTM-P-0117-SET 64ASTM-P-0118-01 64ASTM-P-0118-02 64ASTM-P-0118-03 64ASTM-P-0118-04 64ASTM-P-0118-05 64ASTM-P-0118-06 64ASTM-P-0118-07 64ASTM-P-0118-08 64ASTM-P-0118-09 64ASTM-P-0118-10 64ASTM-P-0119-01 65ASTM-P-0119-02 65ASTM-P-0119-03 65ASTM-P-0119-04 65ASTM-P-0119-05 65ASTM-P-0119-06 65ASTM-P-0119-07 65ASTM-P-0119-08 65ASTM-P-0119-09 65ASTM-P-0119-10 65ASTM-P-0119-11 65ASTM-P-0119-12 65ASTM-P-0119-13 65ASTM-P-0119-14 65ASTM-P-0119-15 65ASTM-P-0119-16 65ASTM-P-0119-17 65ASTM-P-0119-18 65ASTM-P-0119-19 65ASTM-P-0119-20 65ASTM-P-0119-21 65ASTM-P-0119-22 65ASTM-P-0119-SET 65ASTM-P-0120-01 65ASTM-P-0120-02 65ASTM-P-0120-03 65ASTM-P-0120-04 65ASTM-P-0120-05 65ASTM-P-0120-06 65ASTM-P-0120-07 65ASTM-P-0120-08 65ASTM-P-0120-09 65ASTM-P-0120-10 65ASTM-P-0120-11 65ASTM-P-0120-12 65ASTM-P-0120-13 65ASTM-P-0120-14 65ASTM-P-0120-15 65ASTM-P-0120-16 65ASTM-P-0120-17 65ASTM-P-0120-18 65ASTM-P-0120-19 65ASTM-P-0120-20 65ASTM-P-0120-21 65
ASTM-P-0110-SET 25ASTM-P-0110-SET 63ASTM-P-0111-01 63ASTM-P-0111-02 63ASTM-P-0111-03 63ASTM-P-0111-04 63ASTM-P-0111-05 63ASTM-P-0111-06 63ASTM-P-0111-07 63ASTM-P-0111-08 63ASTM-P-0111-09 63ASTM-P-0111-10 63ASTM-P-0111-11 63ASTM-P-0111-12 63ASTM-P-0111-13 63ASTM-P-0111-14 63ASTM-P-0111-15 63ASTM-P-0111-16 63ASTM-P-0111-17 63ASTM-P-0111-SET 63ASTM-P-0112-01 63ASTM-P-0112-02 63ASTM-P-0112-03 63ASTM-P-0112-04 63ASTM-P-0112-05 63ASTM-P-0112-06 63ASTM-P-0112-07 63ASTM-P-0112-08 63ASTM-P-0112-09 63ASTM-P-0112-10 63ASTM-P-0112-11 63ASTM-P-0112-12 63ASTM-P-0112-13 63ASTM-P-0112-14 63ASTM-P-0112-15 63ASTM-P-0112-16 63ASTM-P-0112-17 63ASTM-P-0112-SET 63ASTM-P-0113-01 22, 63ASTM-P-0113-02 22, 63ASTM-P-0113-03 22, 63ASTM-P-0113-04 22, 63ASTM-P-0113-05 22, 63ASTM-P-0113-06 22, 63ASTM-P-0113-07 22, 63ASTM-P-0113-08 22, 63ASTM-P-0113-09 22, 63ASTM-P-0113-10 22, 63ASTM-P-0113-11 22, 63ASTM-P-0113-12 22, 63ASTM-P-0113-13 22, 63ASTM-P-0113-14 22, 63ASTM-P-0113-15 22, 63ASTM-P-0113-16 22, 63ASTM-P-0113-17 22, 63ASTM-P-0113-SET 22, 63ASTM-P-0114-01 58, 64ASTM-P-0114-02 58, 64ASTM-P-0114-03 58, 64ASTM-P-0114-04 58, 64ASTM-P-0114-05 58, 64ASTM-P-0114-06 58, 64ASTM-P-0114-07 58, 64ASTM-P-0114-08 58, 64ASTM-P-0114-09 58, 64ASTM-P-0114-10 58, 64ASTM-P-0114-11 58, 64ASTM-P-0114-12 58, 64ASTM-P-0114-13 58, 64ASTM-P-0114-14 58, 64ASTM-P-0114-15 58, 64ASTM-P-0114-16 58, 64ASTM-P-0114-17 58, 64ASTM-P-0114-SET 58, 64ASTM-P-0115-01 64ASTM-P-0115-02 64ASTM-P-0115-03 64ASTM-P-0115-04 64ASTM-P-0115-05 64ASTM-P-0115-06 64ASTM-P-0115-07 64ASTM-P-0115-08 64ASTM-P-0115-09 64ASTM-P-0115-10 64ASTM-P-0115-11 64ASTM-P-0115-12 64ASTM-P-0115-13 64ASTM-P-0115-14 64ASTM-P-0115-15 64ASTM-P-0115-16 64
ASTM-P-0103-07 62ASTM-P-0103-08 39ASTM-P-0103-08 62ASTM-P-0103-09 39ASTM-P-0103-09 62ASTM-P-0103-10 39ASTM-P-0103-10 62ASTM-P-0103-11 39ASTM-P-0103-11 62ASTM-P-0103-12 39ASTM-P-0103-12 62ASTM-P-0103-SET 39ASTM-P-0103-SET 62ASTM-P-0104-01 62ASTM-P-0104-02 62ASTM-P-0104-03 62ASTM-P-0104-04 62ASTM-P-0104-05 62ASTM-P-0104-06 62ASTM-P-0104-07 62ASTM-P-0104-08 62ASTM-P-0104-09 62ASTM-P-0105-01 62ASTM-P-0105-02 62ASTM-P-0105-03 62ASTM-P-0105-04 62ASTM-P-0105-05 62ASTM-P-0105-06 62ASTM-P-0105-07 62ASTM-P-0106-01 62ASTM-P-0106-02 62ASTM-P-0106-03 62ASTM-P-0106-04 62ASTM-P-0106-05 62ASTM-P-0106-06 62ASTM-P-0106-07 62ASTM-P-0107-5 62ASTM-P-0108-01 63ASTM-P-0108-02 63ASTM-P-0108-03 63ASTM-P-0108-04 63ASTM-P-0108-05 63ASTM-P-0108-06 63ASTM-P-0108-07 63ASTM-P-0108-08 63ASTM-P-0108-09 63ASTM-P-0108-10 63ASTM-P-0108-11 63ASTM-P-0108-12 63ASTM-P-0108-13 63ASTM-P-0108-14 63ASTM-P-0108-15 63ASTM-P-0108-16 63ASTM-P-0108-17 63ASTM-P-0108-SET 63ASTM-P-0109-01 63ASTM-P-0109-02 63ASTM-P-0109-03 63ASTM-P-0109-04 63ASTM-P-0109-05 63ASTM-P-0109-06 63ASTM-P-0109-07 63ASTM-P-0109-08 63ASTM-P-0109-09 63ASTM-P-0109-10 63ASTM-P-0109-11 63ASTM-P-0109-12 63ASTM-P-0109-13 63ASTM-P-0109-14 63ASTM-P-0109-15 63ASTM-P-0109-16 63ASTM-P-0109-17 63ASTM-P-0109-SET 63ASTM-P-0110-01 63ASTM-P-0110-02 63ASTM-P-0110-03 63ASTM-P-0110-04 63ASTM-P-0110-05 63ASTM-P-0110-06 63ASTM-P-0110-07 63ASTM-P-0110-08 63ASTM-P-0110-09 63ASTM-P-0110-10 63ASTM-P-0110-11 63ASTM-P-0110-12 63ASTM-P-0110-13 63ASTM-P-0110-14 63ASTM-P-0110-15 63ASTM-P-0110-16 63ASTM-P-0110-17 63
ASTM-P-0090-11 66ASTM-P-0090-12 66ASTM-P-0090-13 66ASTM-P-0090-14 66ASTM-P-0090-15 66ASTM-P-0090-16 66ASTM-P-0090-SET 66ASTM-P-0091-01-10X 38ASTM-P-0091-02-10X 38ASTM-P-0091-03-10X 38ASTM-P-0091-04-10X 38ASTM-P-0091-05-10X 38ASTM-P-0091-06-10X 38ASTM-P-0091-07-10X 38ASTM-P-0091-08-10X 38ASTM-P-0091-09-10X 38ASTM-P-0091-10-10X 38ASTM-P-0091-10X-SET 38ASTM-P-0091-11-10X 38ASTM-P-0091-12-10X 38ASTM-P-0091-13-10X 38ASTM-P-0091-14-10X 38ASTM-P-0091-15-10X 38ASTM-P-0091-16-10X 38ASTM-P-0091-17-10X 38ASTM-P-0091-18-10X 38ASTM-P-0091-19-10X 38ASTM-P-0091-20-10X 38ASTM-P-0091-21-10X 38ASTM-P-0091-22-10X 38ASTM-P-0092-0.1X 66ASTM-P-0092-100X 66ASTM-P-0092-10X 66ASTM-P-0092-1X 66ASTM-P-0092-500X 66ASTM-P-0092-5X 66ASTM-P-0092-BL 66ASTM-P-0092-SET 66ASTM-P-0100-01 62ASTM-P-0100-02 62ASTM-P-0100-03 62ASTM-P-0100-04 62ASTM-P-0100-05 62ASTM-P-0100-06 62ASTM-P-0100-07 62ASTM-P-0100-08 62ASTM-P-0100-09 62ASTM-P-0100-10 62ASTM-P-0100-11 62ASTM-P-0100-12 62ASTM-P-0100-SET 62ASTM-P-0101-01 62ASTM-P-0101-02 62ASTM-P-0101-03 62ASTM-P-0101-04 62ASTM-P-0101-05 62ASTM-P-0101-06 62ASTM-P-0101-07 62ASTM-P-0101-08 62ASTM-P-0101-09 62ASTM-P-0101-10 62ASTM-P-0101-11 62ASTM-P-0101-12 62ASTM-P-0102-01 62ASTM-P-0102-02 62ASTM-P-0102-03 62ASTM-P-0102-04 62ASTM-P-0102-05 62ASTM-P-0102-06 62ASTM-P-0102-07 62ASTM-P-0102-08 62ASTM-P-0102-09 62ASTM-P-0102-10 62ASTM-P-0102-11 62ASTM-P-0102-12 62ASTM-P-0102-SET 39ASTM-P-0102-SET 62ASTM-P-0103-01 39ASTM-P-0103-01 62ASTM-P-0103-02 39ASTM-P-0103-02 62ASTM-P-0103-03 39ASTM-P-0103-03 62ASTM-P-0103-04 39ASTM-P-0103-04 62ASTM-P-0103-05 39ASTM-P-0103-05 62ASTM-P-0103-06 39ASTM-P-0103-06 62ASTM-P-0103-07 39ii
INDEXD-6296-VER2 55D-6296-VER-SET 55D-6296-VER-SET-PAK 55D-6379-SET 57D-6379-SET-PAK 57D-6379-SRS 57D-6379-SRS-PAK 57D-6428-0.1X 57D-6428-0.1X-4 57D-6428-0.5X 57D-6428-0.5X-4 57D-6428-100X 57D-6428-100X-4 57D-6428-10X 57D-6428-10X-4 57D-6428-1X 57D-6428-1X-4 57D-6428-2.5X 57D-6428-2.5X-4 57D-6428-25X 57D-6428-25X-4 57D-6428-50X 57D-6428-50X-4 57D-6428-5X 57D-6428-5X-4 57D-6428-75X 57D-6428-75X-4 57D-6428-BL 57D-6428-BL-4 57D-6428-R1-4-SET 57D-6428-R1-SET 57D-6428-R2-4-SET 57D-6428-R2-SET 57D-6550-CONC 58D-6550-CONC-5ML 58DRH/GRH-FL-SS 86DRH/GRH-FL-SS-PAK 86DRH/GRH-FL-SS-R2 86DRH/GRH-FL-SS-R2-PAK 86DRH-001S 95DRH-001S-10X 95DRH-002N 56DRH-002N 14DRH-002N-10X 56DRH-002N-10X 14DRH-002S 95DRH-002S-R1 14, 20DRH-002S-R1-PAK 14, 20DRH-002S-R2 14DRH-002S-R2-PAK 14DRH-003S 95DRH-004S-5X 86, 95DRH-004S-5X-PAK 86DRH-005S-10X 14DRH-005S-10X 95DRH-006-CAL-10X 87DRH-006-CAL-1X 87DRH-006-CAL-20X 87DRH-006-CAL-40X 87DRH-006-CAL-4X 87DRH-006-CAL-SET 87DRH-006S 87DRH-006S-PAK 87DRH-006-SS 88, 91DRH-006-SS-PAK 88, 91DRH-007-CAL-10X 87DRH-007-CAL-1X 87DRH-007-CAL-20X 87DRH-007-CAL-40X 87DRH-007-CAL-4X 87DRH-007-CAL-SET 87DRH-007S 87DRH-007S-PAK 87DRH-007-SS 87, 91DRH-007-SS-PAK 87, 91DRH-008S-R1 14, 56, 86, 95DRH-008S-R1-PAK 14, 56, 86,
95DRH-009S 85DRH-009S-PAK 85DRH-010S 97DRH-010S-PAK 97DRH-FL-SS 86DRH-FL-SS-3X 86DRH-FL-SS-3X-PAK 86DRH-FL-SS-PAK 86DRH-FTRPH 86, 95DRH-FTRPH2 95DRH-FTRPH2-PAK 95DRH-FTRPH-PAK 86, 95
D-5453-LL-02 31D-5453-LL-03 31D-5453-LL-04 31D-5453-LL-BL 31D-5453-LL-SET 31D-5453-ML-01 31D-5453-ML-02 31D-5453-ML-03 31D-5453-ML-04 31D-5453-ML-05 31D-5453-ML-BL 31D-5453-ML-SET 31D-5480-CR-100X-PAK 32D-5480-CR-PAK 32D-5480-IS-5ML 32D-5480-IS-5ML-PAK 32D-5501-94-01 32D-5501-94-02 32D-5501-94-03 32D-5501-94-04 32D-5501-94-05 32D-5501-94-06 32D-5501-94-07 32D-5580-95-CAL-IS-SET 32D-5580-95-CAL-SET-10ML 32D-5580-QC 33D-5580-QC-PAK 33D-5580-QC-R1 33D-5580-QC-R1-PAK 33D-5600-01-1 37D-5600-BLH-5 37D-5600-BLH-L 37D-5600-LIB-1 37D-5600-LIB-5 37D-5708-A-10X 39D-5708-B-10X-1 39D-5708-B-10X-5 39D-5708-B-5 39D-5762-95-100X 40D-5762-95-10X 40D-5762-95-1X 40D-5762-95-500X-PAK 40D-5762-95-50X 40D-5762-95-5X 40D-5762-95-BL 40D-5762-95-CAL-SET 40D-5769-ADD/IS 47D-5769-ADD/IS-R 48D-5769-ADD/IS-R2 49D-5769-ADD-10ML 46D-5769-ADD-5ML 46D-5769-CAL/IS-R2-SET 49D-5769-CAL/IS-R-SET 48D-5769-CAL/IS-SET 47D-5769-CAL-SET-10ML 46D-5769-CAL-SET-5ML 46D-5769-QC/IS-5ML 47D-5769-QC/IS-5ML-PAK 47D-5769-QC/IS-R2-5ML 49D-5769-QC/IS-R2-5ML-PAK 49D-5769-QC/IS-R-5ML 48D-5769-QC/IS-R-5ML-PAK 48D-5769-QC-10ML 46D-5769-QC-10ML-PAK 46D-5863-95A-10X-1 52D-5863-95B-10X 52D-611-01 4D-611-02 4D-611-03 4D-611-04 4D-611-05 4D-611E-01 4D-611E-02 4D-611E-03 4D-611E-SET 4D-611-SET 4D-6258-01 54D-6258-02 54D-6258-03 54D-6258-04 54D-6258-05 54D-6258-BL 54D-6258-CAL-SET-5ML 54D-6258-CONC-5ML 54D-6296-BL 55D-6296-CAL1 55D-6296-CAL1-PAK 55D-6296-CAL2 55D-6296-CAL2-PAK 55D-6296-VER1 55
D-4629-91-HB-CON-PAK 23D-4629-91-LB-0.3X 23D-4629-91-LB-100X 23D-4629-91-LB-10X 23D-4629-91-LB-1X 23D-4629-91-LB-25X 23D-4629-91-LB-50X 23D-4629-91-LB-75X 23D-4629-91-LB-CAL-SET 23D-4629-91-LB-CON 23D-4629-91-LB-CON-PAK 23D-4815/IS-SET 24D-4815/IS-SET-PAK 24D-4815-RT 24D-4815-RT-PAK 24D-4815-SET-10ML 24D-4815-VT 24D-4815-VT-PAK 24D-4929-94 25D-4929-94-100X 25D-4929-94-100X-PAK 25D-4929-94-PAK 25D-5059-A-01 27D-5059-A-02 27D-5059-A-03 27D-5059-A-04 27D-5059-A-05 27D-5059-A-06 27D-5059-A-07 27D-5059-A-CAL-SET 27D-5059-C-01 27D-5059-C-02 27D-5059-C-03 27D-5059-C-04 27D-5059-C-05 27D-5059-C-06 27D-5059-C-07 27D-5059-C-CAL-SET 27D-5059-IS-10ML-PAK 27D-5059-IS-4 27D-5134-92-ALK 27D-5134-92-CEM 27D-5134-92-LCM 27D-5134-92-NAP 27D-5134-92-REF 27D-5134-92-SET 27D-5184-91-AL-1 28D-5184-91-AL-5 28D-5184-91-SI-1 28D-5184-91-SI-5 28D-5184-91-TA-5 28D-5186-96-DLC-25X 28D-5186-96-DLC-50X 28D-5186-96-DLC-SET 28D-5186-96-PM 28D-5186-96-PM-PAK 28D-5307-CR 29D-5307-CR-PAK 29D-5307-IS-10ML 29D-5307-IS-10ML-PAK 29D-5307-QUAL 29D-5307-QUAL-PAK 29D-5307-QUANT 29D-5307-QUANT-PAK 29D-5441 30D-5441-10X 30D-5441-10X-5ML 30D-5441-10X-5ML-PAK 30D-5441-10X-PAK 30D-5441-5ML 30D-5441-5ML-PAK 30D-5441-PAK 30D-5441-QUAL 30D-5441-QUANT 30D-5441-RES 30D-5441-RES-5ML 30D-5441-RES-5ML-PAK 30D-5441-RES-PAK 30D-5442-CR-PAK 31D-5442-PAK 31D-5442-RT1 31D-5442-RT2 31D-5443-93-HTM 31D-5453-HL-01 31D-5453-HL-02 31D-5453-HL-03 31D-5453-HL-04 31D-5453-HL-BL 31D-5453-HL-SET 31D-5453-LL-01 31
CLP-BLN-5 39, 52CLP-BLN-5 71CLP-BLN-L 39, 52CLP-BLN-L 71CLP-BLW-5 71CLP-BTEX 94CLP-BTEX-10X 94CLP-BTEX-10X-PAK 94CLP-BTEX-PAK 94D-2622-LL-1000X-4 10D-2622-LL-100X-4 10D-2622-LL-10X-4 10D-2622-LL-1100X-4 10D-2622-LL-1200X-4 10D-2622-LL-200X-4 10D-2622-LL-300X-4 10D-2622-LL-30X-4 10D-2622-LL-400X-4 10D-2622-LL-500X-4 10D-2622-LL-50X-4 10D-2622-LL-5X-4 10D-2622-LL-600X-4 10D-2622-LL-700X-4 10D-2622-LL-75X-4 10D-2622-LL-800X-4 10D-2622-LL-900X-4 10D-2622-LL-BL-4 10D-2622-LL-CAL-SET 10D-2789-CTM 11D-2789-CTM-PAK 11D-2887-REFOIL 14D-3120-92-100X 10, 16D-3120-92-10X 10, 16D-3120-92-1X 10, 16D-3120-92-30X 10, 16D-3120-92-3X 10, 16D-3120-92-50X 10, 16D-3120-92-75X 10, 16D-3120-92-BL 10D-3120-92-CAL-SET 10, 16D-3120-BL 16D-3230-89-1 16D-3230-89-5 16D-3237-01 16D-3237-02 16D-3237-03 16D-3237-04 16D-3237-CAL-SET 16D-3524-CAL-SET-10ML 17D-3524-CAL-SET-5ML 17D-3524-CR 17D-3524-CR-PAK 17D-3524-IS-10ML 17D-3524-IS-10ML-PAK 17D-3524-QC-10ML 17D-3605-91-1 17D-3606/IS2-SET 18D-3606/IS2-SET-PAK 18D-3606/IS-SET 18D-3606/IS-SET-2ML 18D-3606/IS-SET-2ML-PAK 18D-3606-QC/IS-10ML 18D-3606-QC/IS-10ML-PAK 18D-3606-QC-25ML 18D-3606-QC-25ML-PAK 18D-3606-QC-IS2-25ML 18D-3606-QC-IS2-25ML-PAK 18D-3606-SET-25ML 18D-3610-93-1 18D-3710-QUAL 20D-3710-QUAL-PAK 20D-3798-10ML 20D-3798-10ML-PAK 20D-3798-IS 20D-3798-IS-PAK 20D-3831 20D-4291-93 21D-4291-93-PAK 21D-4420-94 22D-4420-94-PAK 22D-4420-CAL-SET 22D-4629-91-HB-0.3X 23D-4629-91-HB-100X 23D-4629-91-HB-10X 23D-4629-91-HB-1X 23D-4629-91-HB-25X 23D-4629-91-HB-50X 23D-4629-91-HB-75X 23D-4629-91-HB-CAL-SET 23D-4629-91-HB-CON 23
ASTM-SSTDB-04 11ASTM-SSTDB-05 11ASTM-SSTDB-06 11ASTM-SSTDB-07 11ASTM-SSTDB-BL 11AZ-8015-DRO/ORO 85AZ-8015-DRO/ORO-PAK 85AZ-8015-RTV 85AZ-8015-RTV-PAK 85AZ-8015-SCS 85AZ-8015-SCS-PAK 85BOOK-TPH 12BOOK-TPH 93C-216N 21C-216S 54C-216S-H-10X 54C-216S-M 54C-216-ST-1 21C-216-ST-1-PAK 21C-216-ST-2 21C-216-ST-2-PAK 21C-221N 21C-221S 54C-221S-H-10X 54C-221S-M 54C-221-ST-1 21C-221-ST-1-PAK 21C-221-ST-2 21C-221-ST-2-PAK 21C-232N 21C-232S 54C-232S-H-10X 54C-232S-M 54C-232-ST-1 21C-232-ST-1-PAK 21C-232-ST-2 21C-232-ST-2-PAK 21C-242N 21C-242S 54C-242S-H-10X 54C-242S-M 54C-242-ST-1 21C-242-ST-1-PAK 21C-242-ST-2 21C-242-ST-2-PAK 21C-248N 21C-248S 54C-248S-H-10X 54C-248S-M 54C-248-ST-1 21C-248-ST-1-PAK 21C-248-ST-2 21C-248-ST-2-PAK 21C-254N 21C-254S 54C-254S-H-10X 54C-254S-M 54C-254-ST-1 21C-254-ST-1-PAK 21C-254-ST-2 21C-254-ST-2-PAK 21C-260N 21C-260S 54C-260S-H-10X 54C-260S-M 54C-260-ST-1 21C-260-ST-1-PAK 21C-260-ST-2 21C-260-ST-2-PAK 21C-262N 21C-262S 54C-262S-H-10X 54C-262S-M 54C-262-ST-1 21C-262-ST-1-PAK 21C-262-ST-2 21C-262-ST-2-PAK 21C-268N 21C-268S 54C-268S-H-10X 54C-268S-M 54C-268-ST-1 21C-268-ST-1-PAK 21C-268-ST-2 21C-268-ST-2-PAK 21CAR-DNPH 98CLP-BLH-5 71CLP-BLH-L 71CLP-BLMA-5 71CLP-BLMA-L 71 iii
INDE
XIC-NO2-1X-5 76IC-NO2-2X-1 76IC-NO2-2X-5 76IC-NO2-N-10X-1 79IC-NO2-N-10X-5 79IC-NO2-N-1X-1 77, 79IC-NO2-N-1X-5 79IC-NO3-10X-1 76IC-NO3-10X-5 76IC-NO3-1X-1 76IC-NO3-1X-5 76IC-NO3-2X-1 76IC-NO3-2X-5 76IC-NO3-N-10X-1 79IC-NO3-N-10X-5 79IC-NO3-N-1X-1 79IC-NO3-N-1X-5 79IC-OXAL-10X-1 79IC-OXAL-10X-5 79IC-OXAL-1X-1 79IC-OXAL-1X-5 79ICP-01N-0.5-10X 68ICP-01N-1 68ICP-01N-10X-20ML 68ICP-01N-1-10X 68ICP-01N-25X-20ML 68ICP-01N-5 68ICP-01N-5-10X 68ICP-02N-0.5-10X 68ICP-02N-1 68ICP-02N-10X-20ML 68ICP-02N-1-10X 68ICP-02N-5 68ICP-02N-5-10X 68ICP-03N-0.5-10X 68ICP-03N-1 68ICP-03N-10X-20ML 68ICP-03N-1-10X 68ICP-03N-25X-20ML 68ICP-03N-5 68ICP-03N-5-10X 68ICP-04N-0.5-10X 68ICP-04N-1 68ICP-04N-10X-20ML 68ICP-04N-1-10X 68ICP-04N-25X-20ML 68ICP-04N-5 68ICP-04N-5-10X 68ICP-05N-0.5-10X 68ICP-05N-1 68ICP-05N-10X-20ML 68ICP-05N-1-10X 68ICP-05N-5 68ICP-05N-5-10X 68ICP-06N-0.5-10X 68ICP-06N-1 68ICP-06N-10X-20ML 68ICP-06N-1-10X 68ICP-06N-25X-20ML 68ICP-06N-5 68ICP-06N-5-10X 68ICP-07W-0.5-10X 68ICP-07W-1 68ICP-07W-10X-20ML 68ICP-07W-1-10X 68ICP-07W-5 68ICP-07W-5-10X 68ICP-08N-0.5-10X 68ICP-08N-1 68ICP-08N-10X-20ML 68ICP-08N-1-10X 68ICP-08N-25X-20ML 68ICP-08N-5 68ICP-08N-5-10X 68ICP-09N-0.5-10X 68ICP-09N-1 68ICP-09N-10X-20ML 68ICP-09N-1-10X 68ICP-09N-25X-20ML 68ICP-09N-5 68ICP-09N-5-10X 68ICP-11N-0.5-10X 68ICP-11N-1 68ICP-11N-10X-20ML 68ICP-11N-1-10X 68ICP-11N-25X-20ML 68ICP-11N-5 68ICP-11N-5-10X 68ICP-12N-0.5-10X 68
IC-F-10X-1 76IC-F-10X-5 76IC-F-1X-1 76IC-F-1X-5 76IC-F-2X-1 76IC-FORM-10X-1 79IC-FORM-10X-5 79IC-FORM-1X-1 79IC-FORM-1X-5 79IC-K-10X-1 78IC-K-10X-5 78IC-K-1X-1 78IC-K-1X-5 78IC-K-2X-1 78IC-K-2X-5 78IC-LI-10X-1 78IC-LI-10X-5 78IC-LI-1X-1 78IC-LI-1X-5 78IC-LI-2X-1 78IC-LI-2X-5 78IC-MAN-01-1 77IC-MAN-02-1 77IC-MAN-03-1 77IC-MAN-04-1 77IC-MAN-05-R1-1 77IC-MAN-05-SET 77IC-MAN-06-R1-1 77IC-MAN-06-SET 77IC-MAN-07-R1-1 77IC-MAN-07-SET 77IC-MAN-08-R1-1 77IC-MAN-08-SET 77IC-MAN-09-R1-1 77IC-MAN-09-SET 77IC-MAN-10-R1-1 77IC-MAN-10-SET 77IC-MAN-11-1 77IC-MAN-12-1 77IC-MAN-13-1 77IC-MAN-14-R2-1 77, 79IC-MAN-14-R2-SET 77, 79IC-MAN-14-R3-1 77IC-MAN-14-SET 77IC-MAN-15-R2-1 77IC-MAN-15R-SET 77IC-MAN-16-R1-1 77IC-MAN-16-SET 77IC-MAN-17-R1-1 77IC-MAN-17-SET 77IC-MAN-18-R1-1 77IC-MAN-18-SET 77IC-MAN-CAL-SET 77IC-MCA-01-1 78IC-MCA-02-1 78IC-MCA-03-1 78IC-MCA-04-1 78IC-MCA-05-1 78IC-MCA-06-1 78IC-MG-10X-1 78IC-MG-10X-5 78IC-MG-1X-1 78IC-MG-1X-5 78IC-MG-2X-1 78IC-MG-2X-5 78IC-NA-10X-1 78IC-NA-10X-5 78IC-NA-1X-1 78IC-NA-1X-5 78IC-NA-2X-1 78IC-NA-2X-5 78IC-NH4-10X-1 78IC-NH4-10X-5 78IC-NH4-1X-1 78IC-NH4-1X-5 78IC-NH4-2X-1 78IC-NH4-2X-5 78IC-NH4-N-10X-1 79IC-NH4-N-10X-5 79IC-NH4-N-1X-1 79IC-NH4-N-1X-5 79IC-NO2-0.05X-1 77IC-NO2-0.12X-1 77IC-NO2-0.1X-1 77IC-NO2-0.2X-1 77IC-NO2-0.4X-1 77IC-NO2-0.5X-1 77IC-NO2-10X-1 76IC-NO2-10X-5 76IC-NO2-1X-1 76-77
GRH-004-SS-10X-PAK 88, 90GRH-004-SS-PAK 88, 90GRH-IS 85-86, 88, 91, 95GRH-IS-10X 88, 91GRH-IS-PAK 85-86, 88, 91, 95GRH-PA-001 89GRH-PA-001-PAK 89GRH-SS 85-86, 95GRH-SS-PAK 85-86, 95HS-001N 92HS-001S 92HS-001S-40X 92HS-001S-D-40X 92HS-002N 92HS-002S 92HS-002S-40X 92HS-002S-D-40X 92HS-003N 92HS-003S 92HS-003S-40X 92HS-003S-D-40X 92HS-004N 92HS-004S 92HS-004S-40X 92HS-004S-D-40X 92HS-005N 92HS-005S 92HS-005S-40X 92HS-005S-D-40X 92IC-ACET-10X-1 79IC-ACET-10X-5 79IC-ACET-1X-1 79IC-ACET-1X-5 79IC-AN-KIT-10X-1 76IC-AN-KIT-10X-5 76IC-AN-KIT-1X-1 76IC-AN-KIT-1X-5 76IC-AN-KIT-2X-1 76IC-AN-KIT-2X-5 76IC-AN-KIT-R-10X-1 79IC-AN-KIT-R-10X-5 79IC-BA-10X-1 78IC-BA-10X-5 78IC-BA-1X-1 78IC-BA-1X-5 78IC-BA-2X-1 78IC-BA-2X-5 78IC-BR-10X-1 76IC-BR-1X-1 76IC-BR-1X-5 76IC-BR-2X-1 76IC-BR-2X-5 76IC-CA-10X-1 78IC-CA-10X-5 78IC-CA-1X-1 78IC-CA-1X-5 78IC-CA-2X-1 78IC-CA-2X-5 78IC-CAT-KIT-10X-1 78IC-CAT-KIT-10X-5 78IC-CAT-KIT-1X-1 78IC-CAT-KIT-1X-5 78IC-CAT-KIT-2X-1 78IC-CAT-KIT-2X-5 78IC-CHLR-10X-1 79IC-CHLR-10X-5 79IC-CHLR-1X-1 79IC-CHLR-1X-5 79IC-CHRM-10X-1 79IC-CHRM-10X-5 79IC-CHRM-1X-1 79IC-CHRM-1X-5 79IC-Cl-10X-1 76IC-Cl-10X-5 76IC-Cl-1X-1 76IC-Cl-1X-5 76IC-Cl-2X-1 76IC-Cl-2X-5 76IC-ELU-01-0.5 79IC-ELU-01-0.5-PAK 79IC-ELU-01-1 79IC-ELU-01-1-PAK 79IC-ELU-02-0.5 79IC-ELU-02-0.5-PAK 79IC-ELU-02-1 79IC-ELU-02-1-PAK 79IC-ELU-03-0.5 79IC-ELU-03-0.5-PAK 79IC-ELU-03-1 79IC-ELU-03-1-PAK 79
FU-013 92FU-013-40X 92FU-013-D-40X 92FU-014 92FU-014-40X 92FU-014-D-40X 92FU-015 92FU-015-40X 92FU-015-D-40X 92FU-016 92FU-016-40X 92FU-016-D-40X 92FU-017 92FU-017-40X 92FU-017-D-10X 93FU-017-D-40X 92FU-018-D-40X 92FU-018-H 92FU-018-H-40X 92FU-019-D-40X 92FU-019-H 92FU-019-H-40X 92FU-020-D-40X 92FU-020-H 92FU-020-H-40X 92FU-021-D-40X 92FU-021-H 92FU-021-H-40X 92FU-022 92FU-022-40X 92FU-022-D-40X 92FU-023 92FU-023-40X 92FU-023-D-40X 92FU-025-D-40X 93FU-025-H 93FU-025-H-40X 93FU-026-D-40X 93FU-026-H 93FU-026-H-40X 93FU-027-D-40X 93FU-027-H 93FU-027-H-40X 93FU-028-D-40X 93FU-028-H 93FU-028-H-40X 93GA-001 92GA-001-10X 93GA-001-20X-BTEX 82, 88, 90,94GA-001-40X 92GA-001-D-40X 92GA-002 92GA-002-40X 92GA-002-D-40X 92GA-003 92GA-003-40X 92GA-003-D-40X 92GA-004 92GA-004-40X 92GA-004-D-40X 92GA-005 92GA-005-40X 92GA-005-D-40X 92GAD-001 94GAD-001-PAK 94GARH-IS 94GARH-SS 94GA-W25-10X 93GA-W50-10X 93GA-W75-10X 93GRH-001S 94GRH-001S-PAK 94GRH-002S 94GRH-003S 91, 94GRH-003S-PAK 91, 94GRH-004-MS 88GRH-004-MS-100X 88GRH-004-MS-100X-PAK 88GRH-004-MS-10X 88GRH-004-MS-10X-PAK 88GRH-004-MS-PAK 88GRH-004S/SS 88GRH-004S/SS-PAK 88GRH-004S-10X 88GRH-004S-10X-PAK 88GRH-004-SS 88, 90GRH-004-SS-100X 88, 90GRH-004-SS-100X-PAK 88, 90GRH-004-SS-10X 88, 90
DRH-FTRPH-SET 95DRH-FTRPH-SET-PAK 95DRH-MA-FSS-10ML 88DRH-MA-FSS-50X 88DRH-MA-FSS-50X-PAK 88DRH-MA-MS 87DRH-MA-MS-10X 87DRH-MA-MS-10X-PAK 87DRH-MA-MS-40X 87DRH-MA-MS-40X-PAK 87DRH-MA-MS-PAK 87DRH-MA-SS 87, 91DRH-MA-SS-100X 87, 91DRH-MA-SS-100X-PAK 87, 91DRH-MA-SS-10X 87, 91DRH-MS-ASL 88DRH-MS-ASL-PAK 88DRH-PA-001 89DRH-PA-001-PAK 89DRH-SS 86DRH-SS-PAK 86DRH-TX-001-10X 89DRH-TX-001-10X-PAK 89DRH-TX-002-10X 89DRH-TX-002-10X-PAK 89DRH-TX-002-D-0.4X-10ML 89DRH-TX-002-D-40X 89DRH-TX-002-D-40X-PAK 89DRH-TX-002-D-SET 89DRH-TX-003-CNM 89DRH-TX-003-CNM-PAK 89DRH-TX-003-FCS 89DRH-TX-003-FCS-PAK 89DRH-TX-003-SET 89DRH-TX-003-SS1 89DRH-TX-003-SS1-PAK 89FD2-W25-10X 93FD2-W25-R1-10X 93FD2-W50-10X 93FD2-W50-R1-10X 93FD2-W75-10X 93FD2-W75-R1-10X 93FIA-ARO 4FIA-ARO-5ML 4FIA-CAL-SET 4FIA-OLE 4FIA-OLE-5ML 4FIA-PAR 4FIA-PAR-5ML 4FK-W25-10X 93FK-W50-10X 93FK-W75-10X 93FU-001 92FU-001-40X 92FU-001-D-40X 92FU-002 92FU-002-40X 92FU-002-D-40X 92FU-003 92FU-003-40X 92FU-003-D-40X 92FU-004 92FU-004-40X 92FU-004-D-40X 92FU-005 92FU-005-40X 92FU-005-D-10X 93FU-005-D-40X 92FU-006 92FU-006-40X 92FU-006-D-40X 92FU-007 92FU-007-40X 92FU-007-D-40X 92FU-008 92FU-008-40X 92FU-008-D-40X 92FU-009 92FU-009-40X 92FU-009-D-10X 93FU-009-D-40X 92FU-010 92FU-010-40X 92FU-010-D-40X 92FU-011 92FU-011-40X 92FU-011-D-40X 92FU-012 92FU-012-40X 92FU-012-D-40X 92iv
INDEXICP-67N-5 71ICP-67N-5-10X 71ICP-68N-0.5-10X 71ICP-68N-1 71ICP-68N-10X-20ML 71ICP-68N-1-10X 71ICP-68N-25X-20ML 71ICP-68N-5 71ICP-68N-5-10X 71ICP-69N-0.5-10X 71ICP-69N-1 71ICP-69N-10X-20ML 71ICP-69N-1-10X 71ICP-69N-25X-20ML 71ICP-69N-5 71ICP-69N-5-10X 71ICP-70N-0.5-10X 71ICP-70N-1 71ICP-70N-10X-20ML 71ICP-70N-1-10X 71ICP-70N-25X-20ML 71ICP-70N-5 71ICP-70N-5-10X 71ICP-71N-0.5-10X 71ICP-71N-1 71ICP-71N-10X-20ML 71ICP-71N-1-10X 71ICP-71N-25X-20ML 71ICP-71N-5 71ICP-71N-5-10X 71ICP-MS-01N-0.01X-1 72ICP-MS-01N-0.1X-1 72ICP-MS-01N-1 72ICP-MS-02N-0.01X-1 72ICP-MS-02N-0.1X-1 72ICP-MS-02N-1 72ICP-MS-03N-0.01X-1 72ICP-MS-03N-0.1X-1 72ICP-MS-03N-1 72ICP-MS-04N-0.01X-1 72ICP-MS-04N-0.1X-1 72ICP-MS-04N-1 72ICP-MS-05N-0.01X-1 72ICP-MS-05N-0.1X-1 72ICP-MS-05N-1 72ICP-MS-06N-0.01X-1 72ICP-MS-06N-0.1X-1 72ICP-MS-06N-1 72ICP-MS-08N-0.01X-1 72ICP-MS-08N-0.1X-1 72ICP-MS-08N-1 72ICP-MS-09N-0.01X-1 72ICP-MS-09N-0.1X-1 72ICP-MS-09N-1 72ICP-MS-13N-0.01X-1 72ICP-MS-13N-0.1X-1 72ICP-MS-13N-1 72ICP-MS-14N-0.01X-1 72ICP-MS-14N-0.1X-1 72ICP-MS-14N-1 72ICP-MS-15N-0.01X-1 72ICP-MS-15N-1 72ICP-MS-21W-0.01X-1 72ICP-MS-21W-0.1X-1 72ICP-MS-21W-1 72ICP-MS-22H-0.01X-1 72ICP-MS-22H-0.1X-1 72ICP-MS-22H-1 72ICP-MS-25N-0.01X-1 72ICP-MS-25N-0.1X-1 72ICP-MS-25N-1 72ICP-MS-27N-0.01X-1 72ICP-MS-27N-0.1X-1 72ICP-MS-27N-1 72ICP-MS-29N-0.01X-1 72ICP-MS-29N-0.1X-1 72ICP-MS-29N-1 72ICP-MS-30N-0.01X-1 72ICP-MS-30N-0.1X-1 72ICP-MS-30N-1 72ICP-MS-32N-0.01X-1 72ICP-MS-32N-0.1X-1 72ICP-MS-32N-1 72ICP-MS-33N-0.01X-1 72ICP-MS-33N-0.1X-1 72ICP-MS-33N-1 72ICP-MS-34N-0.01X-1 72ICP-MS-34N-0.1X-1 72ICP-MS-34N-1 72ICP-MS-35W-0.01X-1 72
ICP-53N-25X-20ML 70ICP-53N-5 70ICP-53N-5-10X 70ICP-54N-0.5-10X 70ICP-54N-1 70ICP-54N-10X-20ML 70ICP-54N-1-10X 70ICP-54N-25X-20ML 70ICP-54N-5 70ICP-54N-5-10X 70ICP-55N-0.5-10X 70ICP-55N-1 70ICP-55N-10X-20ML 70ICP-55N-1-10X 70ICP-55N-25X-20ML 70ICP-55N-5 70ICP-55N-5-10X 70ICP-56W-0.5-10X 70ICP-56W-1 70ICP-56W-10X-20ML 70ICP-56W-1-10X 70ICP-56W-25X-20ML 70ICP-56W-5 70ICP-56W-5-10X 70ICP-57W-0.5-10X 70ICP-57W-1 70ICP-57W-10X-20ML 70ICP-57W-1-10X 70ICP-57W-25X-20ML 70ICP-57W-5 70ICP-57W-5-10X 70ICP-58H-0.5-10X 71ICP-58H-1 71ICP-58H-10X-20ML 71ICP-58H-1-10X 71ICP-58H-5 71ICP-58H-5-10X 71ICP-59N-0.5-10X 71ICP-59N-1 71ICP-59N-10X-20ML 71ICP-59N-1-10X 71ICP-59N-25X-20ML 71ICP-59N-5 71ICP-59N-5-10X 71ICP-60N-0.5-10X 71ICP-60N-1 71ICP-60N-10X-20ML 71ICP-60N-1-10X 71ICP-60N-25X-20ML 71ICP-60N-5 71ICP-60N-5-10X 71ICP-61N-1 71ICP-61N-5 71ICP-62N-0.5-10X 71ICP-62N-1 71ICP-62N-10X-20ML 71ICP-62N-1-10X 71ICP-62N-25X-20ML 71ICP-62N-5 71ICP-62N-5-10X 71ICP-63H-0.5-10X 71ICP-63H-1 71ICP-63H-1-10X 71ICP-63H-5 71ICP-63H-5-10X 71ICP-63N-0.5-10X 71ICP-63N-1 71ICP-63N-10X-20ML 71ICP-63N-1-10X 71ICP-63N-25X-20ML 71ICP-63N-5 71ICP-63N-5-10X 71ICP-64W-0.5-10X 71ICP-64W-1 71ICP-64W-10X-20ML 71ICP-64W-1-10X 71ICP-65W-0.5-10X 71ICP-65W-1 71ICP-65W-10X-20ML 71ICP-65W-1-10X 71ICP-65W-5 71ICP-65W-5-10X 71ICP-66N-1 71ICP-66N-5 71ICP-67N-0.5-10X 71ICP-67N-1 71ICP-67N-10X-20ML 71ICP-67N-1-10X 71ICP-67N-25X-20ML 71ICP-67N-5 52
ICP-37N-5 69ICP-37N-5-10X 69ICP-38W-0.5-10X 70ICP-38W-1 70ICP-38W-10X-20ML 70ICP-38W-1-10X 70ICP-38W-25X-20ML 70ICP-38W-5 70ICP-38W-5-10X 70ICP-40H-0.5-10X 70ICP-40H-1 70ICP-40H-10X-20ML 70ICP-40H-1-10X 70ICP-40H-25X-20ML 70ICP-40H-5 70ICP-40H-5-10X 70ICP-41W-0.5-10X 70ICP-41W-1 16ICP-41W-1 70ICP-41W-10X-20ML 70ICP-41W-1-10X 70ICP-41W-5 16ICP-41W-5 70ICP-41W-5-10X 70ICP-42H-0.5-10X 70ICP-42H-1 70ICP-42H-10X-20ML 70ICP-42H-1-10X 70ICP-42H-25X-20ML 70ICP-42H-5 70ICP-42H-5-10X 70ICP-43N-0.5-10X 70ICP-43N-1 70ICP-43N-10X-20ML 70ICP-43N-1-10X 70ICP-43N-25X-20ML 70ICP-43N-5 70ICP-43N-5-10X 70ICP-44N-0.5-10X 70ICP-44N-10X-20ML 70ICP-44N-1-10X 70ICP-44N-25X-20ML 70ICP-44N-5-10X 70ICP-45W-0.5-10X 70ICP-45W-10X-20ML 70ICP-45W-1-10X 70ICP-45W-25X-20ML 70ICP-45W-5-10X 70ICP-46H-0.5-10X 70ICP-46H-10X-20ML 70ICP-46H-1-10X 70ICP-46H-25X-20ML 70ICP-46H-5-10X 70ICP-47N-0.5-10X 70ICP-47N-10X-20ML 70ICP-47N-1-10X 70ICP-47N-25X-20ML 70ICP-47N-5-10X 70ICP-48H-0.5-10X 70ICP-48H-10X-20ML 70ICP-48H-1-10X 70ICP-48H-25X-20ML 70ICP-48H-5-10X 70ICP-49N-0.5-10X 70ICP-49N-10X-20ML 70ICP-49N-1-10X 70ICP-49N-25X-20ML 70ICP-49N-5-10X 70ICP-50N-0.5-10X 70ICP-50N-10X-20ML 70ICP-50N-1-10X 70ICP-50N-25X-20ML 70ICP-50N-5-10X 70ICP-51N-0.5-10X 70ICP-51N-1 70ICP-51N-10X-20ML 70ICP-51N-1-10X 70ICP-51N-25X-20ML 70ICP-51N-5 70ICP-51N-5-10X 70ICP-52W-0.5-10X 70ICP-52W-1 70ICP-52W-10X-20ML 70ICP-52W-1-10X 70ICP-52W-5 70ICP-52W-5-10X 70ICP-53N-0.5-10X 70ICP-53N-1 70ICP-53N-10X-20ML 70ICP-53N-1-10X 70
ICP-24N-5 69ICP-24N-5-10X 69ICP-25N-1 69ICP-25N-10X-20ML 69ICP-25N-25X-20ML 69ICP-25N-5 69ICP-26H-0.5-10X 69ICP-26H-1 69ICP-26H-10X-20ML 69ICP-26H-1-10X 69ICP-26H-25X-20ML 69ICP-26H-5 69ICP-26H-5-10X 69ICP-27N-0.5-10X 69ICP-27N-1 69ICP-27N-10X-20ML 69ICP-27N-1-10X 69ICP-27N-25X-20ML 69ICP-27N-5 52ICP-27N-5 69ICP-27N-5-10X 69ICP-28N-0.5-10X 69ICP-28N-1 69ICP-28N-10X-20ML 69ICP-28N-1-10X 69ICP-28N-25X-20ML 69ICP-28N-5 69ICP-28N-5-10X 69ICP-29N-0.5-10X 69ICP-29N-1 69ICP-29N-10X-20ML 69ICP-29N-1-10X 69ICP-29N-25X-20ML 69ICP-29N-5 69ICP-29N-5-10X 69ICP-30N-0.5-10X 69ICP-30N-1 69ICP-30N-10X-20ML 69ICP-30N-1-10X 69ICP-30N-25X-20ML 69ICP-30N-5 69ICP-30N-5-10X 69ICP-31N-0.5-10X 69ICP-31N-1 69ICP-31N-10X-20ML 69ICP-31N-1-10X 69ICP-31N-25X-20ML 69ICP-31N-5 69ICP-31N-5-10X 69ICP-32N-0.5-10X 69ICP-32N-1 69ICP-32N-10X-20ML 69ICP-32N-1-10X 69ICP-32N-25X-20ML 69ICP-32N-5 69ICP-32N-5-10X 69ICP-33N-0.5-10X 69ICP-33N-1 69ICP-33N-10X-20ML 69ICP-33N-1-10X 69ICP-33N-25X-20ML 69ICP-33N-5 69ICP-33N-5-10X 69ICP-34N-0.5-10X 69ICP-34N-1 69ICP-34N-10X-20ML 69ICP-34N-1-10X 69ICP-34N-25X-20ML 69ICP-34N-5 69ICP-34N-5-10X 69ICP-35W-0.5-10X 69ICP-35W-1 69ICP-35W-10X-20ML 69ICP-35W-1-10X 69ICP-35W-25X-20ML 69ICP-35W-5 69ICP-35W-5-10 69ICP-36N-0.5-10X 69ICP-36N-1 69ICP-36N-10X-20ML 69ICP-36N-1-10X 69ICP-36N-25X-20ML 69ICP-36N-5 69ICP-36N-5-10X 69ICP-37N-0.5-10X 69ICP-37N-1 69ICP-37N-10X-20ML 69ICP-37N-1-10X 69ICP-37N-25X-20ML 69ICP-37N-5 52
ICP-12N-1 68ICP-12N-10X-20ML 68ICP-12N-1-10X 68ICP-12N-25X-20ML 68ICP-12N-5 68ICP-12N-5-10X 68ICP-13H-0.5-10X 68ICP-13H-1 68ICP-13H-1-10X 68ICP-13H-5 68ICP-13H-5-10X 68ICP-13N-0.5-10X 68ICP-13N-1 68ICP-13N-10X-20ML 68ICP-13N-1-10X 68ICP-13N-25X-20ML 68ICP-13N-5 68ICP-13N-5-10X 68ICP-14N-0.5-10X 68ICP-14N-1 68ICP-14N-10X-20ML 68ICP-14N-1-10X 68ICP-14N-25X-20ML 68ICP-14N-5 68ICP-14N-5-10X 68ICP-15N-0.5-10X 68ICP-15N-1 68ICP-15N-10X-20ML 68ICP-15N-1-10X 68ICP-15N-25X-20ML 68ICP-15N-5 68ICP-15N-5-10X 68ICP-16N-0.5-10X 68ICP-16N-1 68ICP-16N-10X-20ML 68ICP-16N-1-10X 68ICP-16N-25X-20ML 68ICP-16N-5 68ICP-16N-5-10X 68ICP-17N-0.5-10X 68ICP-17N-1 68ICP-17N-10X-20ML 68ICP-17N-1-10X 68ICP-17N-25X-20ML 68ICP-17N-5 68ICP-17N-5-10X 68ICP-18N-0.5-10X 68ICP-18N-1 68ICP-18N-10X-20ML 68ICP-18N-1-10X 68ICP-18N-25X-20ML 68ICP-18N-5 68ICP-18N-5-10X 68ICP-19N-0.5-10X 68ICP-19N-1 68ICP-19N-10X-20ML 68ICP-19N-1-10X 68ICP-19N-25X-20ML 68ICP-19N-5 68ICP-19N-5-10X 68ICP-20N-0.5-10X 69ICP-20N-1 69ICP-20N-10X-20ML 69ICP-20N-1-10X 69ICP-20N-5 69ICP-20N-5-10X 69ICP-21W-0.5-10X 69ICP-21W-1 69ICP-21W-10X-20ML 69ICP-21W-1-10X 69ICP-21W-5-10X 69ICP-22H-0.5-10X 69ICP-22H-1 69ICP-22H-10X-20ML 69ICP-22H-1-10X 69ICP-22H-25X-20ML 69ICP-22H-5 69ICP-22H-5-10X 69ICP-23N-0.5-10X 69ICP-23N-1 69ICP-23N-10X-20ML 69ICP-23N-1-10X 69ICP-23N-25X-20ML 69ICP-23N-5 69ICP-23N-5-10X 69ICP-24N-0.5-10X 69ICP-24N-1 69ICP-24N-10X-20ML 69ICP-24N-1-10X 69ICP-24N-25X-20ML 69 v
INDE
XSTP-3X-4 10STP-40X-4 10STP-5X-4 10STP-60X-4 10STP-BL-4 10STP-CAL-SET 10SWMO-100X-4 8SWMO-100X-SHOT 8SWMO-10X-4 8SWMO-10X-SHOT 8SWMO-150X-4 8SWMO-150X-SHOT 8SWMO-15X-4 8SWMO-15X-SHOT 8SWMO-1X-4 8SWMO-1X-SHOT 8SWMO-200X-4 8SWMO-200X-SHOT 8SWMO-2X-4 8SWMO-2X-SHOT 8SWMO-300X-4 8SWMO-300X-SHOT 8SWMO-30X-4 8SWMO-30X-SHOT 8SWMO-3X-4 8SWMO-3X-SHOT 8SWMO-400X-4 8SWMO-400X-SHOT 8SWMO-4X-4 8SWMO-4X-SHOT 8SWMO-500X-4 8SWMO-500X-SHOT 8SWMO-50X-4 8SWMO-50X-SHOT 8SWMO-5X-4 8SWMO-5X-SHOT 8SWMO-600X-4 8SWMO-600X-SHOT 8SWMO-7.5X-4 8SWMO-7.5X-SHOT 8SWMO-70X-4 8SWMO-70X-SHOT 8SWMO-BL-4 8SWMO-BL-SHOT 8SWMO-CAL-SET-4 8SWMO-LT-100X-4 8SWMO-LT-100X-SHOT 8SWMO-LT-10X-4 8SWMO-LT-10X-SHOT 8SWMO-LT-150X-4 8SWMO-LT-150X-SHOT 8SWMO-LT-15X-4 8SWMO-LT-15X-SHOT 8SWMO-LT-1X-4 8SWMO-LT-1X-SHOT 8SWMO-LT-200X-4 8SWMO-LT-200X-SHOT 8SWMO-LT-2X-4 8SWMO-LT-2X-SHOT 8SWMO-LT-300X-4 8SWMO-LT-300X-SHOT 8SWMO-LT-30X-4 8SWMO-LT-30X-SHOT 8SWMO-LT-3X-4 8SWMO-LT-3X-SHOT 8SWMO-LT-400X-4 8SWMO-LT-400X-SHOT 8SWMO-LT-4X-4 8SWMO-LT-4X-SHOT 8SWMO-LT-500X-4 8SWMO-LT-500X-SHOT 8SWMO-LT-50X-4 8SWMO-LT-50X-SHOT 8SWMO-LT-5X-4 8SWMO-LT-5X-SHOT 8SWMO-LT-600X-4 8SWMO-LT-600X-SHOT 8SWMO-LT-7.5X-4 8SWMO-LT-7.5X-SHOT 8SWMO-LT-70X-4 8SWMO-LT-70X-SHOT 8SWMO-LT-BL-4 8SWMO-LT-BL-SHOT 8SWMO-LT-CAL-SET-4 8T-W130 21V-028S-D-10X 90-91V-028S-D-10X-PAK 90-91WA-EPH-10X 91WA-EPH-10X-PAK 91WA-EPH-ALI 91
SDF-2X-4 8SDF-2X-SHOT 8SDF-300X-4 8SDF-300X-SHOT 8SDF-30X-4 8SDF-30X-SHOT 8SDF-3X-4 8SDF-3X-SHOT 8SDF-400X-4 8SDF-400X-SHOT 8SDF-4X-4 8SDF-4X-SHOT 8SDF-500X-4 8SDF-500X-SHOT 8SDF-50X-4 8SDF-50X-SHOT 8SDF-5X-4 8SDF-5X-SHOT 8SDF-600X-4 8SDF-600X-SHOT 8SDF-7.5X-4 8SDF-7.5X-SHOT 8SDF-70X-4 8SDF-70X-SHOT 8SDF-BL-4 8SDF-BL-SHOT 8SDF-CAL-SET-4 8SK-100X-4 9SK-100X-SHOT 9SK-10X-4 9SK-10X-SHOT 9SK-1X-4 9SK-1X-SHOT 9SK-200X-4 9SK-200X-SHOT 9SK-20X-4 9SK-20X-SHOT 9SK-30X-4 9SK-30X-SHOT 9SK-3X-4 9SK-3X-SHOT 9SK-40X-4 9SK-40X-SHOT 9SK-50X-4 9SK-50X-SHOT 9SK-5X-4 9SK-5X-SHOT 9SK-7.5X-4 9SK-7.5X-SHOT 9SK-BL-4 9SK-BL-SHOT 9SK-CAL-SET-4 9SK-HD-100X-4 9SK-HD-10X-4 9SK-HD-150X-4 9SK-HD-15X-4 9SK-HD-1X-4 9SK-HD-200X-4 9SK-HD-20X-4 9SK-HD-2X-4 9SK-HD-300X-4 9SK-HD-30X-4 9SK-HD-3X-4 9SK-HD-400X-4 9SK-HD-40X-4 9SK-HD-4X-4 9SK-HD-500X-4 9SK-HD-50X-4 9SK-HD-5X-4 9SK-HD-600X-4 9SK-HD-7.5X-4 9SK-HD-70X-4 9SK-HD-BL-4 9SK-HD-CAL-SET-4 9SRO-100X-4 11SRO-150X-4 11SRO-200X-4 11SRO-300X-4 11SRO-35X-4 11SRO-400X-4 11SRO-70X-4 11SRO-CAL-SET-4 11STP-100X-4 10STP-10X-4 10STP-1X-4 10STP-200X-4 10STP-20X-4 10STP-2X-4 10STP-300X-4 10STP-30X-4 10
M-GRA-VT-AS-10ML-PAK 33M-GRO-BLNK/IS-10ML 35M-GRO-BLNK/IS-10ML-PAK 35M-GRO-BLNK-10ML 35-37M-GRO-BLNK-10ML 24M-GRO-BLNK-10ML-PAK35-36M-GRO-BLNK-10ML-PAK 24M-GRO-CAL/IS-SET 34M-GRO-CAL/IS-SET-PAK 34M-GRO-CAL-EPA-SET-10ML36M-GRO-CAL-IS/EPA-SET 36M-GRO-CAL-SET 34M-GRO-EPA-CC/IS-5ML 36M-GRO-EPA-CC/IS-5MLPAK36M-GRO-EPA-CC-10ML 36M-GRO-EPA-CC-10ML-PAK 36M-GRO-EPA-SP-5ML 36M-GRO-EPA-SP-5ML-PAK 36M-GRO-IS-5ML 35-36M-GRO-IS-5ML 24M-GRO-IS-5ML-PAK 35-36M-GRO-IS-5ML-PAK 24M-GRO-QC/IS-5ML 35M-GRO-QC/IS-5ML-PAK 35M-GRO-QC-10ML 35M-GRO-QC-10ML-PAK 35M-GRO-QC-R/IS-5ML 35M-GRO-QC-R/IS-5ML-PAK 35M-GRO-QC-R-10ML 35M-GRO-QC-R-10ML-PAK 35MO-COMP-D-40X 93MOSOL-20-16 59MOSOL-75-16 59OGAD-001 2OGAD-001 85, 94, 96OGAD-001-PAK 2OGAD-001-PAK 85, 94, 96OMT-001 66OMT-001-PAK 66OMT-002 66OMT-002-PAK 66OMT-003 66OMT-003-PAK 66OMT-004 66OMT-004-PAK 66OMT-005 66OMT-005-PAK 66OMT-006 66OMT-006-PAK 66OPE-OXY-001-AS 2OPE-OXY-001-AS 96OPE-OXY-001-AT 2OPE-OXY-001-AT 96OPE-OXY-001-AV 2OPE-OXY-001-AV 96RGS-001 98S-3571 12S-603A-10X 85, 94S-603A-10X-PAK 85, 94SBPT-AROM 2, 41SBPT-BENZ 2, 41SBPT-COMP 1, 41SBPT-LSGAS 1, 31, 41SBPT-OLEFIN 2, 41SBPT-OLEFINSFC 1, 41SBPT-SDF 1, 41SBPT-SGAS 2, 41SBPT-SWMO 1, 41SCO-100X-4 11SCO-10X-4 11SCO-200X-4 11SCO-25X-4 11SCO-300X-4 11SCO-400X-4 11SCO-500X-4 11SCO-50X-4 11SCO-CAL-SET-4 11SDF-100X-4 8SDF-100X-SHOT 8SDF-10X-4 8SDF-10X-SHOT 8SDF-150X-4 8SDF-150X-SHOT 8SDF-15X-4 8SDF-15X-SHOT 8SDF-1X-4 8SDF-1X-SHOT 8SDF-200X-4 8SDF-200X-SHOT 8
KF-0.6X-5ML-VAP 5KF-10X-20ML-PAK 5KF-10X-2ML-VAP 5KF-10X-5ML-VAP 5KF-1X-20ML-PAK 5KF-1X-2ML-VAP 5KF-1X-5ML-VAP 5KF-50X-20ML-PAK 5KF-50X-2ML-VAP 5KF-50X-5ML-VAP 5M-005A 98M-005A-10X 98M-005A-10X-PAK 98M-005A-PAK 98M-005B 98M-005B-10X 98M-005B-10X-PAK 98M-005B-PAK 98M-005V 98M-005V-10X 98M-005V-10X-PAK 98M-005V-PAK 98M-1004 98M-1004-10X 98M-1664-20ML 97M-1664-20ML-PAK 97M-1664-5ML 97M-1664-5ML-PAK 97M-418 97M-418-CON 97M-418-PAK 97M-602-GAS-10X 85, 94M-8015B/5031-11 85, 94M-8015B/5031-17 85, 94M-8440 97M-8440-CON 97M-8440-CON-PAK 97M-8440-PAK 97M-8440-SGC 97M-8440-SGC-PAK 97MA-900-4 59MA-900-8 59M-GRA-ADD/IS 44M-GRA-ADD/IS-R 45M-GRA-CAL/IS-SET 44M-GRA-CAL-R/IS-R-SET 45M-GRA-FP 47-49M-GRA-FP-PAK 47-49M-GRA-IS 44, 47, 50M-GRA-IS-5ML 44, 46-47, 50M-GRA-IS-5ML-PAK 44, 46-47,50M-GRA-IS-AS-5ML 33M-GRA-IS-AS-5ML-PAK 33M-GRA-IS-R 45, 48M-GRA-IS-R-10ML 45-46, 48,50M-GRA-IS-R-10ML-PAK 45-46,48, 50M-GRA-IS-R2 49M-GRA-IS-R2-25ML 49M-GRA-IS-R2-SET 49M-GRA-K1 43M-GRA-K2 43M-GRA-K4 43M-GRA-MSR 47M-GRA-MSR-PAK 47M-GRA-QC/IS-5ML 44M-GRA-QC/IS-5ML-PAK 44M-GRA-QC/IS-R-5ML 45M-GRA-QC/IS-R-5ML-PAK 45M-GRA-QC-10ML 44-45, 53M-GRA-QC-10ML-PAK 44-45,53M-GRA-QC-R/IS-5ML 50M-GRA-QC-R/IS-5ML-PAK 50M-GRA-QC-R/IS-R-5ML 50M-GRA-QC-R/IS-R-5ML-PAK50M-GRA-QC-R-10ML 50M-GRA-QC-R-10ML-PAK 50M-GRA-RES 47-49M-GRA-RES-PAK 47-49M-GRA-SCS-AS 33M-GRA-SCS-AS-PAK 33M-GRA-ST 44-45, 47-49M-GRA-ST-PAK 44-45, 47-49M-GRA-VT/IS-AS 33M-GRA-VT/IS-AS-PAK 33M-GRA-VT-AS-10ML 33
ICP-MS-35W-0.1X-1 72ICP-MS-35W-1 72ICP-MS-37N-0.01X-1 72ICP-MS-37N-0.1X-1 72ICP-MS-37N-1 72ICP-MS-41W-0.01X-1 72ICP-MS-41W-0.1X-1 72ICP-MS-41W-1 72ICP-MS-43N-0.01X-1 72ICP-MS-43N-0.1X-1 72ICP-MS-43N-1 72ICP-MS-46H-0.01X-1 72ICP-MS-46H-0.1X-1 72ICP-MS-46H-1 72ICP-MS-50N-0.01X-1 72ICP-MS-50N-0.1X-1 72ICP-MS-50N-1 72ICP-MS-51N-0.01X-1 72ICP-MS-51N-0.1X-1 72ICP-MS-51N-1 72ICP-MS-53N-0.01X-1 72ICP-MS-53N-0.1X-1 72ICP-MS-53N-1 72ICP-MS-54N-0.01X-1 72ICP-MS-54N-0.1X-1 72ICP-MS-54N-1 72ICP-MS-55N-0.01X-1 72ICP-MS-55N-0.1X-1 72ICP-MS-55N-1 72ICP-MS-56W-0.01X-1 72ICP-MS-56W-0.1X-1 72ICP-MS-56W-1 72ICP-MS-59N-0.01X-1 72ICP-MS-59N-0.1X-1 72ICP-MS-59N-1 72ICP-MS-60N-0.01X-1 72ICP-MS-60N-0.1X-1 72ICP-MS-60N-1 72ICP-MS-61N-0.01X-1 72ICP-MS-61N-0.1X-1 72ICP-MS-63N-0.01X-1 72ICP-MS-63N-0.1X-1 72ICP-MS-63N-1 72ICP-MS-64W-0.01X-1 72ICP-MS-64W-0.1X-1 72ICP-MS-64W-1 72ICP-MS-66N-0.01X-1 72ICP-MS-66N-0.1X-1 72ICP-MS-67N-0.01X-1 72ICP-MS-67N-0.1X-1 72ICP-MS-67N-1 72ICP-MS-69N-0.01X-1 72ICP-MS-69N-0.1X-1 72ICP-MS-69N-1 72ICP-MS-70N-0.01X-1 72ICP-MS-70N-0.1X-1 72ICP-MS-70N-1 72IC-PO4-10X-1 76IC-PO4-10X-5 76IC-PO4-1X-1 76IC-PO4-1X-5 76IC-PO4-2X-1 76IC-PO4-2X-5 76IC-PO4-P-10X-1 79IC-PO4-P-10X-5 79IC-PO4-P-1X-1 79IC-PO4-P-1X-5 79IC-SO4-10X-1 76IC-SO4-10X-5 76IC-SO4-1X-1 76IC-SO4-1X-5 76IC-SO4-2X-1 76IC-SO4-2X-5 76IC-SO4-S-10X-1 79IC-SO4-S-10X-5 79IC-SO4-S-1X-1 79IC-SO4-S-1X-5 79IC-SR-10X-1 78IC-SR-10X-5 78IC-SR-1X-1 78IC-SR-1X-5 78IC-SR-2X-1 78IC-SR-2X-5 78IPE-OILG-001-AS 2IPE-OILG-001-AS 96IPE-OILG-001-AT 2IPE-OILG-001-AT 96IPE-OILG-001-AV 2IPE-OILG-001-AV 96IS-7281-2OZ 59vi
INDEXWM-20CST-70 59WM-20CST-71 59WM-20-NMS-10X-1 26, 61WM-20-NMS-1X-1 26, 61WM-20-NMS-30X-1 26, 61WM-20-NMS-3X-1 26, 61WM-20-NMS-50X-1 26, 61WM-20-NMS-5X-1 26, 61WM-20-NMS-90X-1 26, 61WM-20-NMS-SET-1 26, 61WM-21-10X-4 59WM-21-10X-8 59WM-21-1X-4 59WM-21-1X-8 59WM-21-30X-4 59WM-21-30X-8 59WM-21-3X-4 59WM-21-3X-8 59WM-21-50X-4 59WM-21-50X-8 59WM-21-5X-4 59WM-21-5X-8 59WM-21-90X-4 59WM-21-90X-8 59WM-21-NMS-10X-1 28WM-21-NMS-10X-1 61WM-21-NMS-1X-1 28WM-21-NMS-1X-1 61WM-21-NMS-30X-1 28WM-21-NMS-30X-1 61WM-21-NMS-3X-1 28WM-21-NMS-3X-1 61WM-21-NMS-50X-1 28WM-21-NMS-50X-1 61WM-21-NMS-5X-1 28WM-21-NMS-5X-1 61WM-21-NMS-SET-1 28WM-21-NMS-SET-1 61WM-21-SET-4 59WM-21-SET-8 59WM-75CST-01-5X 59WM-75CST-02-5X 59WM-75CST-04-5X 59WM-75CST-06-5X 59WM-75CST-07-5X 59WM-75CST-08-5X 59WM-75CST-09-5X 59WM-75CST-13-5X 59WM-75CST-15-5X 59WM-75CST-27-5X 59WM-75CST-29-5X 59WM-75CST-30-5X 59WM-75CST-32-5X 59WM-75CST-33-5X 59WM-75CST-35-5X 59WM-75CST-37-5X 59WM-NMS-14 26, 28WM-NMS-14-5X 26, 28Z-008 21Z-008S 54Z-008S-H-10X 54Z-008S-M 54
WA-EPH-ALI-PAK 91WA-EPH-ALI-R1 91WA-EPH-ALI-R1-PAK 91WA-EPH-ARO 91WA-EPH-ARO-PAK 91WA-EPH-ARO-R1 91WA-EPH-ARO-R1-PAK 91WA-EPH-FCS 91WA-EPH-FCS-PAK 91WA-EPH-FCS-R1 91WA-EPH-FCS-R1-PAK 91WA-EPH-MS2-20ML 91WA-EPH-MS2-20ML-PAK 91WA-VPH 90WA-VPH-100X 90WA-VPH-100X-PAK 90WA-VPH-10X 90WA-VPH-10X-PAK 90WA-VPH-10X-SS 90WA-VPH-10X-SS-PAK 90WA-VPH-MS 90WA-VPH-MS-PAK 90WA-VPH-PAK 90WA-VPH-RT 90WA-VPH-RT-PAK 90WC-OILG-10X-1 2, 96WFD2-R1-SET 93WFD2-SET 93WFK-SET 93WGU-SET 93WM-11-NMS-10X-1 61WM-11-NMS-1X-1 61WM-11-NMS-30X-1 61WM-11-NMS-3X-1 61WM-11-NMS-50X-1 61WM-11-NMS-5X-1 61WM-11-NMS-90X-1 61WM-11-NMS-SET-1 61WM-12-10X-4 59WM-12-10X-8 59WM-12-1X-4 59WM-12-1X-8 59WM-12-30X-4 59WM-12-30X-8 59WM-12-3X-4 59WM-12-3X-8 59WM-12-50X-4 59WM-12-50X-8 59WM-12-5X-4 59WM-12-5X-8 59WM-12-90X-4 59WM-12-90X-8 59WM-12-NMS-10X-1 61WM-12-NMS-1X-1 61WM-12-NMS-30X-1 61WM-12-NMS-3X-1 61WM-12-NMS-50X-1 61WM-12-NMS-5X-1 61WM-12-NMS-SET-1 61WM-12-SET-4 59WM-12-SET-8 59WM-20CST-01 59WM-20CST-02 59WM-20CST-03 59WM-20CST-04 59WM-20CST-06 59WM-20CST-07 59WM-20CST-08 59WM-20CST-09 59WM-20CST-13 59WM-20CST-15 59WM-20CST-27 59WM-20CST-29 59WM-20CST-30 59WM-20CST-32 59WM-20CST-33 59WM-20CST-34 59WM-20CST-35 59WM-20CST-37 59WM-20CST-41 59WM-20CST-43 59WM-20CST-50 59WM-20CST-52 59WM-20CST-53 59WM-20CST-54 59WM-20CST-55 59WM-20CST-60 59WM-20CST-63 59WM-20CST-64 59WM-20CST-67 59 vii
5 Ways to Search“e-Standards®” is the Fastest, Most Comprehensive Search Enginewith over 30,000 products.Search by:
• Catalog Number• Single or Multiple Components, • Method (EPA, ASTM, etc.)• Chemical Category (Organic, Inorganic, Petroleum, etc.)• Other Companies’ Part Number
Log on to www.accustandard.com. and see how easy, it is.
Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase &click - it's that easy! Discounts may apply on online orders, see
details on website.
On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purityto be used as reference standards, and offers custom synthesiscapability for milligram to kilogram batches. If you can't find thespecific standard you need we can prepare Custom Formulationand Custom Packaging for both Organic and Inorganic needs. Seeour Website for more info.
Over 30,000 Standards,just a click away
AccuStandard, Your Standards and Technical Information Source!
Total PetroleumHydrocarbon PatternRecognition Standards
BOOK-TPH $ 35
Analytical Standards andReference Material for all209 PCB Congeners
S-3571 $ 25
There is an easier way to get Chemical Reference Standards
e-Standards® from AccuStandard.com
On-Line Ordering
Requested QuantityOrganic Inorganic
Photocopythis form for
future use
YOU CAN ALSO USE OUR WEB SITE TOREQUEST CUSTOM QUOTATIONS AT
www.accustandard.com
QR-PDN-001Rev. AUG 11 2003
Requested Delivery Date __________Quotation Notes _____________________________________________
_____________________________________________
_____________________________________________
For Internal Use Only
No. of Comps. ____
Product Description ________________________________________
Concentration ______________________
Solvent / Matrix ______________________
___ x 500 mL
___ x 500 mL5 x 1 mL
10 x 1 mL
20 x 1 mL
other ___ x ___
Concentration Units
ng/mL
µg/mL
mg/mL
wt. %
vol. %
Component (s) CAS No. Concentration
(optional) (if varied)
1 __________________________________________________________2 __________________________________________________________3 __________________________________________________________4 __________________________________________________________5 __________________________________________________________6 __________________________________________________________7 __________________________________________________________8 __________________________________________________________9 __________________________________________________________
10 __________________________________________________________11 __________________________________________________________12 __________________________________________________________13 __________________________________________________________14 __________________________________________________________15 __________________________________________________________16 __________________________________________________________17 __________________________________________________________18 __________________________________________________________19 __________________________________________________________20 __________________________________________________________
AccuStandard, Inc.125 Market StreetNew Haven, CT 06513USAFAX: 203-786-5287
Page ___ of ___
From: Company Contact _______________________________________
Company Name _______________________________________
Phone: ( ) _______________________ Ext. __________
FAX: ( ) _______________________
Email: ______________________________________
Custom Quotation Request Form
Send to:
AS Tech. Rep. __________ Product Ordering # ____________
Quote Creation Date __________ Quoted price $ ____________
1
New Products in this Catalog• Low Sulfur and Nitrogen Standards (see pages 6-11) • LUFT/LUST Standards (see pages 81-98)• TPH Standards (see pages 81, 92-93, 96-97)• No Haz Fee ICP & AA Standards (see pages 67-75)• Additional New ASTM Standards
Involvement in the Petrochemical Industry• Participation in regular ASTM meetings• Active in D-02 and D-16 subcommittees• Provides support to several Petrochemical Instrument Manufacturers
Resources• Low Sulfur Analyzers (such as XOS) for Measurements to ppb Levels• Instrumention for Analyzing Standards for ICP, ICP-MS, AA, GC/MS,
GC/FID, GC/EC, GC/NPD, Karl Fischer Titrator, and others• NIST/NVLAP Accredited (Lab Code 200389-0) as a PT Provider• ISO 9001:2000 Certified (ISO 9001 for the last 10 years)• Extensive Inventory of ASTM and Related Standards
Experience in Petrochemical Requirements• Years of Round Robin Studies with ASTM• Ampulled over 300 gallons of ASTM fuel sets including
over 35 gasoline and hydrocarbon blends• Standards for over 100 ASTM Methods• 17 years of Manufacturing, Organic & Inorganic Standards• Synthesizes rare Hydrocarbons not otherwise available
Notice the Difference with AccuStandard
PRINTED ONRECYCLED PAPER
© AccuStandard, Inc. 2003
AccuStandard, Inc.125 Market StreetNew Haven, CT 06513USA
TEL: 203-786-5290Toll Free 800-442-5290
FAX: 203-786-5287FAX Toll Free 877-786-5287
Email: [email protected]: www.accustandard.com
ISO 9001:2000Certificate Number: 31692
In this Catalog
100 plus ASTM Methods: Low Level Sulfur, Wear Metals, PIONA, DHA, Oxygenates, Aromatics,
Physical Properties, LUFT/LUST (New Section)
MEMBER
PRESORTED STANDARDUS POSTAGE
PAIDBRIDGEPORT, CT
PERMIT NO. 38
AccuStandard, Inc.125 Market St.New Haven, CT 06513
Address Service Requested