Operation Instructions

PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT

Operating your blind

TO RAISE & LOWER THE BLINDSimply raise and lower the blind to the desired position by firmly holding the handle.

MaintenanceThe product is maintenance free however we recommend that regular visual checks are completed to ensure that no components have been damaged, which could result in operating difficulties and/or cause a safety risk.

If any maintenance is required we recommend that the work is carried out immediately, by a reputable blind company.

childsafe

Clip & FitM E A S U R I N G G U I D E

WARNINGYoung children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.

To avoid strangulation and entanglement, keep cords out of reach of young children. Cords may become wrapped areound a child’s neck. Move beds, cots and furniture away from window covering cords.

Do not tie cords together. Make sure cords do not twistand create a loop.

Measuring Guide

TO MEASURE FOR YOUR NEW BLINDS ALL YOU NEED IS:

FOLLOW THE INSTRUCTIONS AND REMEMBER TO DOUBLE CHECK YOUT MEASUREMENTS AS YOU GO ALONG

Step 1Measure the width of the visible glass at the top, middle anf bottom area of each window where the glass meets the rubber bead. Order the smallest of the three measurements.

Step 2Measure the height of the visible glass at the three points accross the area of each window where the glass meets the rubber head. Order the smallest of the three measurements.

Measuring Tape

Notepad

PencilDO NOT INCLUDE ANY OF THE BEADING OR RUBBER SEALS IN YOUR MEASUREMENT

Max Width: Minimum Height: 200mMax Height:

Minimum Width:

Maximum Width:

Maximum Height:Minimum Height:

200mm

1300mm

150mm2100mm

Minimum & Maximum Sizes

Disclaimer: Max. width of 1300mm only available up to max. drop of 1500mm. Max. drop of 2100mm only available up to max. width of 1500mm.

TOOLS REQUIRED