nuline 2010 catalog
DESCRIPTION
Truck parts catalogTRANSCRIPT
The Leader in Spray Suppression Products
Fenders • Mounting Kits & BracketsHangers • Light Bars
2010www.nuline.ca
The leaders in spray suppressionare now offering a complete
of fiberglass fenders(see pages 1 & 13)
2010www.nuline.ca
Single Axle Fenders
Fiberglass Fenders• Grey gel coat• Made of lightweight, maintenance free, long-lasting fiberglass, NO RUST!• Protective, keeping your truck cleaner with less damage• Low weight compared to steel or aluminum• New hidden bracket design• Corrosion and weather resistance to salt and will not rust, resists water and UV rays so will not fade or discolour• Full fenders drop down and roll away farther on the tire than traditional fenders on the market today. This keeps road spray and debris from flying off your tires and hitting your truck or other vehicles. This protection greatly decreases insurance and repair cost
Part No. Width Descriptionnf18019px 19" blackpolyfullsupersinglefender
nf18026px 26" blackpolyfullfender
nf18030px 30" blackpolyfullsmoothfender
nf180px 24" black/colourpolyfullfender
Choosecolour2-silver3-white4-orange5-red6-yellow7-blue
Example: NF180PX-5 (red X guard)
Part No. Descriptionnf180ff-1 fiberglass180withflares
nf180ffL-1 fiberglass180withflaresandlightholesnf180ffB-1 fiberglass180withflaresandhiddenbrackets*
nf180ffBL-1 fiberglass180withflares,lightholesandhiddenbrackets*
Poly 180º Series Fenders• Long lasting polyethylene• 3" flange 63"
40"
63"
51"
76"
51"
76"
50"
1
*HiddenBrackets
2010www.nuline.ca2
Single Axle FendersNF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange
Part No. Width Descriptionnf155a 24" aluminumsingleaxlefender
nf155ss 24" stainlesssingleaxlefender
nf166a 24" aluminumsingleaxlefender
nf166ss 24" stainlesssingleaxlefender
nf180a 24" aluminumsingleaxlefender
nf180ss 24" stainlesssingleaxlefender
nf155ssLa 24" stainlessliftaxlefender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
53"
43"66"
47"
80"
50"
55"
36"
24"2"
Part No. Width Descriptionnf10166ssnr 24" stainlesssingleaxlefender
nf10180ssnr 24" stainlesssingleaxlefender
1000 Series Flanged 16 Gauge No Rib Fenders• Durable16 gauge stainless steel• 1.5" flange 66"
47"
80"
51"
Part No. Width Descriptionnf166ssnr 24" stainlesssingleaxlefender
nf180ssnr 24" stainlesssingleaxlefender
Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange 66"
47"
80"
51"
24"2"
24"1.5"
2010www.nuline.ca3
Single Axle Fenders
Part No. Width Descriptionnf180aCp 24" aluminumcheckerplate
Part No. Width Descriptionn180ss 24" stainlesssingleaxlefendern180g 24” galvanizedsingleaxlefendern180a 24” aluminumsingleaxlefender
n155ss 24” stainlesssingleaxlefendern155g 24” galvanizedsingleaxlefender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
Aluminum Checker Plate Flanged Fenders• .100 gauge• 2" flange
N Series 4 Rib Fenders
80"
50"
80"
50"
55"
43"
24"
24"2"
Part No. Width Descriptionnf18019ss 19.5" smooth16gauge
Super Single 16 Gauge Fenders• 16 gauge stainless steel
80"
50"
19.5"
2010www.nuline.ca4
Single Axle Poly Fender Mounting Kit
Single Axle Fender Mounting Kit
Part No. Description
np180kit poly180ºmountkit(willmountapairofpolyfendersonly)
All kits mount one set of fenders
n2180ssmk4n200-ss74n521n2180sshb
All kits mount one set of fenders
n180Gmk4n301n180Ghb
New Item coming soon!
2010www.nuline.ca5
All kits mount one set of fenders
n180gmk-pm4n401n180gHB
Single Axle Fender Mounting Kits
All kits mount one set of fenders
n180ssmk4n30-C1n180ssHB
2010www.nuline.ca
Single Axle Fender Mounting KitsHeavy duty 14 gauge stainless steel All kits mount one set of fenders
n2180ssmkHD*4 n200-ss7HD4 n521 n2180ssHb
6
All kits mount one set of fenders
n180ssmk-pm4 n40-c1 n180ssHb
2010www.nuline.ca7
Half Tandem Fenders
NF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange
Part No. Width Descriptionnf66px 26" blackpolyhalffender
Part No. Width Descriptionnf122a 24" aluminumtandemfender
nf122ss 24" stainlesstandemfender
nf139a 24" aluminumtandemfender
nf139ss 24" stainlesstandemfender
nf150a 24" aluminumtritandemfender
nf150ss 24" stainlesstritandemfender
nf60a 24” aluminumtandemfender
nf60ss 24” stainlesstandemfender
nf66a 24” aluminumtandemfender
nf66ss 24” stainlesstandemfender
nf80ss 24” stainlesstandemfender
nf125a 24” aluminumtandemfender
nf125ss 24” stainlesstandemfender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
Black Poly Half Fenders• Long lasting polyethylene• 3" flange
24"2"
98"27"
122"
117"27"
139"
128"27"
150"
31"35"
54"
45"35"
73"
85"35"
112"
25"35"
54"
31"35"
60"
2010www.nuline.ca8
Half Tandem Fenders
Part No. Width Descriptionnf66aCp 24" aluminumcheckerplate
Aluminum Checker Plate Flanged Fenders• .100 gauge• 2" flange
24"2"
27"39"
58"
25"35"
54"
27"39"
58"
24"1.5"
Part No. Width Descriptionnf1060ssnr 24" stainlesstandemfender
nf1066ssnr 24" stainlesstandemfender
nf1080ssnr 24” stainlesstandemfender
1000 Series Flanged 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange
Part No. Width Descriptionnf66ssnr 24" stainlesstandemfender
Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange
24"2"
31"35"
60"
45"35"
73"
2010www.nuline.ca9
Half Tandem Fenders
Part No. Width Descriptionn60ss 24” stainlesshalffendern60g 24” galvanizedhalffender
n66ss 24” stainlesshalffendern66g 24” galvanizedhalffendern66a 24” aluminumhalffender
n80ss 24” stainlesshalffendern80g 24” galvanizedhalffender
n125ss 24” stainlesshalffendern125g 24” galvanizedhalffendern125a 24” aluminumhalffender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
N Series 4 Rib Fenders
Part No. Width Descriptionnf1060ssnrLf 24" stainlesslongfronttandemfender
nf1066ssnrLf 24" stainlesslongfronttandemfender
nf1086ssnrLf 24” stainlesslongfronttandemfender
1000 Series Long Front 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange
24"1.5"
25"41"
56"
31"41"
62"
45"41"
74"
24"
45"35"
73"
85"35"
112"
25"35"
54"
31"35"
60"
2010www.nuline.ca10
Half Tandem Fender Mounting KitsAll kits mount one set of fenders
n8060ssmk(Crossovermount)1nC091-ss2n230*1n6080ssHB
All kits mount one set of fenders
n8060ssmk-sm2n30-C2n230*1n6080ssHB-sm
All kits mount one set of fenders
n8060ssmk-pm2n40-C2n230*1n6080ssHB-sm
SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)
2010www.nuline.ca11
Half Tandem Fender Mounting KitsAll kits mount one set of fenders
n260ssmk2n200-ss72n230*2n521n260ssHB
SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)
For heavy duty arm order: N260SSMKHD
All kits mount one set of fenders
n8060ssmk-pm22n728-ss2n522n2125-ss2n230*1n6080ssHB-2
All kits mount one set of fenders
n8060gmk-pm2n402n230*1n6080gHB-sm
2010www.nuline.ca12
All kits mount one set of fenders
n8060gMK1 nc0912 n230*1 n6080gHB
SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)
Half Tandem Fender Mounting Kits
Made To Order (14 Day Lead Time)Single Axle Fenders
Half Tandem Fenders
N-Series NF Series Specialty nF166g nF180AnR nF155SSLA
N-Series NF Series Specialtyn60A nF66SSLF nF66AnR nF112SS nF80A nF116A nF80g
Full Tandem FendersN-Series NF Series Specialtyn126SS nF112SS nF12054AnR nF116A nF12054AcP nF126SS
2010www.nuline.ca13
Full Tandem Fenders
Fiberglass 180º Series/Double Hump Fenders• Grey gel coat• Made of lightweight, maintenance free, long-lasting fiberglass, NO RUST!• Protective, keeping your truck cleaner with less damage• Low weight compared to steel or aluminum• New hidden bracket design• Corrosion and weather resistance to salt and will not rust, resists water and UV rays so will not fade or discolour• Full fenders drop down and roll away farther on the tire than traditional fenders on the market today. This keeps road spray and debris from flying off your tires and hitting your truck or other vehicles. This protection greatly decreases insurance and repair cost
*HiddenBrackets
Part No. Description
nf13254ff-1 fiberglasstandem54"spreadwithflares
nf13254ffL-1 fiberglasstandem54”spreadwithflaresandlightholes
nf13254ffB-1 fiberglasstandem54”spreadwithflares,andhiddenbrackets*
nf13254ffBL-1 fiberglasstandem54”spreadwithflares,lightholesandhiddenbrackets*
nf180fD-1 fiberglass180withflares
nf180fDL-1 fiberglass180withflaresandlightholes
nf180fDB-1 fiberglass180withflares,andhiddenbrackets*
nf180fDBL-1 fiberglass180withflares,lightholesandhiddenbrackets*
2010www.nuline.ca
Full Tandem Fenders
NF Series Flanged 3 Rib Fenders• Durable 16 gauge stainless steel or aluminum• 2" flange
Part No. Width Descriptionnf13254px 26" blackpolyfulltandemfender
Part No. Width Descriptionnf99a 24" aluminumtandemfender
nf99ss 24" stainlesstandemfender
nf112a 24" aluminumtandemfender
nf112ss 24" stainlesstandemfender
nf120a 24" aluminumtandemfender
nf120ss 24" stainlesstandemfender
nf12054a 24” aluminumtandemfender
nf12054ss 24” stainlesstandemfender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
Black Poly Full Tandem Fenders• Long lasting polyethylene• 3" flange
24"2"
55"39" 39"
108"
54"27" 27"
99"
66"27" 27"
112"
60"
54"
35"
35"
25"
31"
107"
101"
Part No. Width Descriptionnf12054acp 24" aluminumcheckerplatetandem
Aluminum Checker Plate Flanged Fenders• .100 gauge• 2" flange
24"2"
54"31"
101"
35"
14
2010www.nuline.ca15
Full Tandem Fenders
60"36" 36"
109"
54"39" 39"
103"
60"
54"
35"
35"
25"
31"
107"
101"
Part No. Width Descriptionn120ss 24” stainlesstandemfendern120g 24” galvanizedtandemfendern120a 24” aluminumtandemfender
n12054ss 24” stainlesstandemfendern12054g 24” galvanizedtandemfendern12054a 24” aluminumtandemfender
Gauge Chartstainlesssteel16gaugealuminum.090galvanized16gauge
N Series 4 Rib Fenders 24"
35"
35"
60"25"
54"31"
101"
107"
24"1.5"
Part No. Width Descriptionnf1012060ssnr 24" stainlesstandemfender
nf1012054ssnr 24" stainlesstandemfender
1000 Series Flanged 16 Gauge No Rib Fenders• Durable 16 gauge stainless steel• 1.5" flange
Part No. Width Descriptionnf13260ssnr 24" stainlesstandemfender
nf13254ssnr 24” stainlesstandemfender
Pro Series Flanged 14 Gauge No Rib Fenders• 14 gauge stainless steel• 2" flange
24"2"
2010www.nuline.ca16
Full Tandem Fender Mounting KitsAll kits mount one set of fenders
n120ssmk(Crossovermount)1nC091-ss2n30-C2n230*1n120ssHB
All kits mount one set of fenders
n120ssmk-sm4n30-C2n230*1n120ssHB-sm
All kits mount one set of fenders
n120ssmk-pm4n40-C2n230*1n120ssHB-sm
SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)
2010www.nuline.ca
Full Tandem Fender Mounting KitsAll kits mount one set of fenders
n2120ssmk4n200-ss74n522n230*1n2120ssHB
All kits mount one set of fenders
n120-gmk1nC0912n302n230*1n120gHB
All kits mount one set of fenders
n120ssmk-pm24n728-ss4n522n230*1n120ssHB-2
SPECIAL NOTES:The standard N230 Centre Mounts can be replaced with the N230 model of your choice. See page 21 for a complete listing. (Warranty is void if centre bracket is not bolted to fender.)
For heavy duty arm order: N2120SSMKHD
17
2010www.nuline.ca
Quarter Fenders
Part No. Description
n224-ss 24"
Includes everything as shown
Part No. Description
n227-ss 27"
Includes everything as shown
Part No. Description
n231-ss 31"
Includes everything as shown
Part No. Description
nf234ssnr 34"
Includes everything as shown
Stainless Steel Fenders
Stainless Steel Fenders
Stainless Steel Fenders
Stainless Steel Fenders 14 Gauge
18
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
2010www.nuline.ca
Quarter Fenders
Part No. Description
n224-ssB 24"
Includes everything as shown
Part No. Description
n1585 24"
Includes everything as shown
Part No. Description
n1900-kitpairassemblyblack
All kits include 21" poly top flap, top flap hardware and fender tube clamp
Part No. Description
n123-r rubberpair
Includes everything as shown
Stainless Steel Fenders
Braceless Stainless Steel Fenders (OEM Factory Replacement)
Polyline™ Quarter Fender
Rubber Quarter Fender
19
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
Use N52 (2X) as a frame attachment, see page 20N52 is NOT part of a quarter fender kit, it must be purchased separately
2010www.nuline.ca
Fender Mounting AccessoriesPart No. Description
nC091(noholes) 94"pipeZincnC091-ss 94"pipestainlesssteel
n30(noholes) 30"sidemountZincn30-C(noholes) 30"sidemountChrome
n40(noholes) 30"postmountZincn40-C 30"postmountChrome (boththreaded3/4-16)
n200-ss7 stainlesssteelsidemountArmn200-ss7hD 12Ga.heavyDutysssidemountArmn200-ss7p stainlesssidemountArmForpeterbilt
n728-ss 29"sidemountpipestainlesssteel
n52 Threaded3/4-16postmount
n2125-ss stainlesssteelClamp
n127-ss QuarterFenderpipe
n32 4"offset32"post 17/8"Diameter
n42 32"straightpipe 17/8"Diameter
18-02068lhss/Rhss sidemountstainless(fitspeterbilt)
20
New Item coming soon!
2010www.nuline.ca
Centre Mounting BracketsPart No. Description Height Plate Centres
N230 Regular 123/4" 4x6" 41/4"
N230-P-LH Peterbilt 10" 4x8" 53/4"
N230-P RH Peterbilt 10" 4x8" 53/4"
N32UB Universal Centre Bracket
N230-PM LH Universal 81/2"-115/8" No Plate Single Hole
N230-PM RH Universal 81/2"-115/8" No Plate Single Hole
N230-FL LH Freightliner 121/2" No Plate Slots in Bar
N230-FL RH Freightliner 121/2" No Plate Slots in Bar
N235 LH Outboard Left Hand 71/2" No Plate Slots in Bar
N235 RH Outboard Right Hand 71/2" No Plate Slots in Bar
NKIT40P Black Poly Bracket Kit
(4 Units Per Kit)
Centre Mounting Brackets
21
New Item coming soon!
2010www.nuline.ca
Flexible Mud Flap HangersPart No. Description
n23 CoiledspringHangerset
n33 CoiledspringHangerset
n25 springHangersetn25-BarreL Bulkpacked40pc.Barrel*n23-2BuLk mountkit(seebulkpage)
n35 angledspringHangerset
Flexible Mud Flap Reflector Strips
Part No. Description
nrs3000 aluminumreflectorstrip(pairs) (fitsnf27,nf30,nf31,nf33,n23,n25,nL306)
nrs3700 aluminumreflectorstrip(pairs) (fitsnf37,nf3345,n33,n35)
Flexible Mud Flap Hangers
SPECIAL NOTES: All sets come complete with 2 arms, mud flap mounting clips and all mounting hardware*N25 Barrel contains arms only, no N23-2 brackets included
22
2010www.nuline.ca
Spring Loaded Mud Flap HangersPart No. Description
Set Single
nf30p nf30p-1 painted
nf30C nf30C-1 Chrome
nf30ss nf30ss-1 stainlesssteel
nf31ss stainlesssteel
nf33ss nf33ss-1 stainlesssteel
NF3345 Angled Mud Flap Hanger Series
nf3345p painted
nf3345C Chrome
nf3345ss stainlesssteel
NF27 Mud Flap Hanger Series
nf27p painted
nf27C Chrome
nf27ss stainlesssteel
NF37 Angled Mud Flap Hanger Series
nf37p painted
nf37C Chrome
nf37ss stainlesssteel
NF30 Mud Flap Hanger Series
*Mounting hardware included with all hangers
30", 31", 33"
21/2"
281/2"
21/2"
30"
11/8"
11/8"
271/2"
23
2010www.nuline.ca
Lights and Deck PlatesPart No. Description
nL306ss-nL stainlesssteellightbarset withnolights
n3412ssnL stainlesssteelcentrelightpanel withnolights
Galvanized Deck Plates
Nominal Channel Standard Pattern Part No. Thickness Depth Width Length Weightround n2433gr .086 11/2" 24" 33" 28LBs. n3633gr .086 11/2" 36" 33" 38LBs.
Diamond n1833gD .075 11/2" 183/4" 33" 19LBs. n2433gD .075 11/2" 24" 33" 28LBs. n3633gD .075 11/2" 36" 33" 38LBs.
Aluminum Deck Plates
Nominal Channel Standard Pattern Part No. Thickness Depth Width Length Weightround n1833ar .125 2" 18" 33" 9LBs. n2433ar .125 2" 24" 33" 12LBs. n3633ar .125 2" 36" 33" 18LBs.
Diamond n1233aD .080 2" 113/4" 33" 4.8LBs. n2433aD .080 2" 24" 33" 10LBs. n3633aD .080 2" 36" 33" 14.4LBs.
Deck Plate Lengths12' Lengths Available (special order call customer service)
Aluminum Stepsn1223a aluminumstep
Spring Loaded Mud Flap Light Bar301/2"
33/4"
331/2"
113/4"
23"
121/2"
24
2010www.nuline.ca
Tool Boxes and Anti-Sail BracketsPart No. Description
ntB450 18"Wx15"Hx16"Dblacktoolb
ntB800 32”Wx20”Hx19”Dblacktoolbox
Anti-Sail Brackets
n2620-p paintedanti-sailBracket.fitsstandard
24"widemudflapsupto1/2"thick
n2620-C Chromeplatedanti-sailBracket.
fitsstandard24"widemudflapsupto1/2"thick
n2620-ss 304polishedstainlesssteelanti-sailBracket
fitsstandard24"widemudflapsupto1/2"thick
Poly Tool Boxes
Logo Service Available(minimum order quantity 10 boxes)
25
2010www.nuline.ca
Bulk ItemsPart No. Description Quantity
n1522ruBuLk universalrubberstrip 20
n23-2BuLk mountkitforn25 40
n123-5BuLk mudflaptop 20
n123-8BuLk mufflerClamp 50
n755BuLk Quarterfenderplug 50
n755ssBuLk Quarterfenderplug 50
nf30-3BuLk 141/8spring 20
nf27-3BuLk 105/8spring 20
n123ss-4BuLk QuarterfendertubeBrace 24
n123ss-3BuLk stainlesssteelfendersaddle 20
n38JBuLk “J”HookforDeckplate 40
Spring Loaded Mud Flap Light Bar
26
2010www.nuline.ca
Important! Read Instructions Prior to Installation
Installation Instructions for NU-LINE Fenders
Consult pages 7-12 of this catalogue for the dimensions of the mounting hardware available.The rear bracket (or centre bracket on a full fender) dimensions are critical in determining which bracket will fit on a particular truck. Determine the optimum location for the front and rear mounting brackets and in the case of a full fender, the centre brackets.
Install the brackets as per the schematic shown in the catalogue. Affix all Brackets and posts or side mounts to the frame using grade 8 bolts to firmly secure the brackets.
In the case of half and full fenders use the rubber insulator strips between the surface of the rear or centre bracket and the fender. These must be used as they absorb vibration which can lead to cracking of fenders. The rubber strips are manufactured to mate with the ribbed and smooth fender models. Round rubber grommets should not be used. The rear bracket must have a flat surface of 21" by 2" to properly secure the fender, and ensure maximum effectiveness and longevity of the fender. Some rear or centre bracket models such as the N230-PMLH and N230PMRH require a left and right.
All models of fenders must be positioned so that they are aligned properly. This means that all surfaces must make contact with the brackets without the fender requiring any twisting or bending. Should the fender require twisting to attach it to the brackets you risk premature unwarranted failure or cracking.
Drill the holes in the fenders as needed. Three bolts must be used when the fenders are attached to the rear brackets or centre brackets. These bolts are supplied in the appropriate mounting kits. When using the mounting kits containing the N200-SS7 mounting arms there is an installation template included for this purpose. This template is included in the N2180SSMK, N2120SSMK, and N260SSMK mounting kits.
Use only stainless steel hardware when installing NU-LINE stainless steel Tandem Fenders and galvanized when installing aluminum and galvanized fenders. The hardware supplied in the mounting kits is specific for the type of material used in the fenders. Failure to use only the specified hardware could result in premature staining and/or corrosion of fenders.
Secure the fenders firmly on the mounting arrangement using the hardware provided in the mounting kits.
In order to keep stainless steel fenders clean with a good appearance, clean only with mild soap and water. Do not use harsh or gritty cleaners or acids as they could tarnish the surface of fenders.
Rubber Insulator Strips Must Be Used.
27
Limited Warranty
All products manufactured and sold by NU-LINE Products Inc. are guaranteed to be free of defects in workmanship and materials for a period of one (1) year from date of purchase. All NU-LINE products must be installed using only NU-LINE supplied mounting kits and brackets. All tandem and half fenders must use a properly secured centre bracket to avoid cracking. Any use of mounting hardware and brackets of another make to mount NU-LINE products, or any modification of a NU-LINE product, will render the NU-LINE guarantee void. NU-LINE assumes no responsibility for the cost of installation or removal.
Exceptions to this limited warranty are as follows: cleaning with anything other than soap and water, damage and dents from road hazards are not covered, misuse or accidental impact damage is not covered, damage caused by corrosive materials is not covered.
Any materials to be considered for warranty must be returned to NU-LINE Product in Hamilton, freight prepaid, for inspection, with an approved NU-LINE Returned Goods Authorization. This warranty is good only for the original end-user of NU-LINE products.
General Information
Stainless Steel Fender Care and MaintenanceNU-LINE strongly recommends washing your fenders with water only. If detergents are necessary do not use anything stronger than a mild soap and water. When wiping and buffing your fenders we recommend using a soft, clean cloth making sure to wipe in the direction of the grain, do not buff in a circular fashion as this could cause damage to the surface.
TermsAll shipments are made COD unless credit is pre-arranged and authorized by NU-LINE Products Inc.
Minimum Orders$250.00 is the minimum order. Orders under $250.00 are subject to a $50.00 service charge.
ShippingAll goods are to be shipped FOB from NU-LINE locations in Hamilton, ON, Montreal, PQ, and Edmonton, AB. Every effort is made to ship customer orders in a timely manner, NU-LINE Products and its affiliates cannot guarantee same day delivery of the orders it receives. Shipments from Edmonton are subject to a 6% warehouse fee.
ShortagesShortages or errors made in filling an order must be reported within 10 days upon receipt of any shipments.
Damaged GoodsIt is the customer’s responsibility to inspect each shipment for damage. If the product is damaged in transit, the customer must file a freight claim with the carrier.
Returned GoodsAll returned goods must be authorized in advance by NU-LINE Products Inc. Items returned for credit will be subject to a restocking charge of 15%, and must be returned prepaid. No returns will be accepted without:
1. A Returned Goods Authorization (RGA) number issued by NU-LINE, and 2. A copy of the original invoice. 3. RGA good for 30 days only.
No credit will be issued for goods that NU-LINE deems damaged, unsuitable for sale, or discontinued.
Each customer is eligible to return 10% of last years sales.
28
Product Display StandsPart No. Weight Height Width DepthnDSE English 125 lbs. 60" 60" 30"nDSE French 125 lbs. 60” 60” 30”
WAREHOUSE LOCATIONS
Manufacturing Plantand Main Warehouse
NU-LINE PRODUCTS INC.891 ARVIN AVENUE,STONEY CREEK, ON L8E 5N9TEL. (905) 643-5375FAX (905) 643-5380WWW.NULINE.CA
Distribution Centre (East)
OUTIL PAC INC.5895 AVENUE ANDOVER,MONT-ROYAL, PQ H4T 1H8TEL. (514) 733-3555FRENCH TECHNICAL SERVICE(514) 910-2917
Main Warehouse Toll Free #1-866-837-2082© Copyright 2010 NU-LINE Products Inc. All Rights Reserved. Created by www.1stclassmarketing.com