norma galia exportación -cdc_emb_gamme_12_12_2012_en_tcm1805-839521.pdf
DESCRIPTION
http://cartonondulado.blogspot.com.es/TRANSCRIPT
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
1111
OVERSEAS packaging specifications for parts suppliers
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
2222
Contents
Chapter TITLE PAGE
1
ILN packaging specifications
3
1.1 Introduction 3
2
Responsibilities
4
2.1 Protective materials 4 2.2 Type of protection 5 2.3 Corrosion prevention 6 2.4 Packing densification 7 2.5 Container densification 7
3
General recommendations
8
3.1 Returnable packages 8 3.2 Disposable packages 8 3.2.1 Disposable cardboard packaging (PU) 8 3.2.2 Disposable cardboard packaging (HU) 10 3.3.3 Disposable wooden packaging 12
4
Packaging identification
13
4.1 Label characteristics 13 4.2 Marking 14 4.3 Symbols 14
5
Logistics Conditions Description (DCL)
15
5.1 General information 15 5.2 Fill out the DCL sheet - important points 15
6
Appendices
15
6.1 DCL sheet process 15 6.2 Disposable cardboard packages 16 6.2.1 Cardboard Packaging Units range 16 6.2.2 Cardboard Handling Units range 17 6.3 Overseas Returnable Packages range 18 6.4 DCL sheet copy 19.20 6.5 Logistics glossary 21 6.6 High cube cardboard Packages range 22
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
3333
Versions history
Reference Update Purpose of main changes Author V 1.0 06/12/04 First issue Christian Montel / Michle Leho V 1.1 15/05/05 Package dimensions updated Christian Montel / Michle Leho V 1.2 05/12/12 ILN package range expanded Dominique Carvalho V 1.3 12/12/12 Internet links deleted Dominique Carvalho
1 ILN Packages Specifications
"The design of supplier packages must meet the requirements of these specifications. Any other proposal requires prior consent from RENAULT engineering department."
In the context of the project, RENAULT may ask the supplier to perform a DCL (Description of Logistics Conditions) sheet pre-study or "pre-DCL" to define packaging that complies with these specifications.
"The glossary of logistics terms mentioned in the document can be found in Appendix 6.5 on page 21"
1-1 Introduction
These specifications, prepared by RENAULT, concern at all BOP/BIP parts suppliers (RENAULT first fit assembly, mechanical and body components and parts) for export. It applies to production and "post-production phase" flow in ISO High Cube containers via ILN logistics centres to RENAULT plants using the following means of transport: - Truck - Boat - Train * plane in exceptional cases (carry over the range of packages from these specifications).
It is designed to regulate the design of packaging to meet the requirements:
Of the ILN involved in terms of:
- Quality: The packaging protects the quality of parts against impact, deformation (mechanical or weather constraints) as well as against oxidation from its date of manufacture, during transportation and storage until acceptance at the client's plant.
- Densification: optimising the use of space in packaging is vital to ensure the most cost-effective logistics.
Of the final customer (plant) in terms of:
- Monthly use of parts
- Line side installation (safety and ergonomics requirements included).
For any questions on these specifications, contact the ILN packaging engineering department or plant concerned.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
4444
2 Responsibilities
The proposed packaging must comply with the transportation legislation in force (IMDG International Maritime Dangerous Goods). The internal arrangements (bracing, separators, etc.) must comply with the specifications and protects the quality of parts against impact and deformation. The supplier is responsible for the quality of its parts
Wood
Any wood used for packaging must comply with ISPM15 Example: wooden pallet, wooden packages, additional wood bracing, etc. * A copy of ISPM15 is available at the following address: www.ippc.int The supplier will refer to the latest version of the standard.
Cardboard
Packaging compliance will always be checked from a qualitative point of view (wood thickness, cardboard, ISPM15, etc.). The Engineering Department is prepared to provide Technical Assistance to define packaging whenever a supplier so requests, without however releasing the supplier from its final responsibility.
DCL
The supplier undertakes to fully comply with the specifications by filling out the DCL sheet. Packaging deliveries to the ILN may not be accepted without the supplier DCL sheet duly completed and validated by the engineering department. Copy of the sheet in Appendix 6.4 page 18. * Is available on the supplier portal in xls format (with an instruction manual tab). Chapter IX - Packaging - Logistics Conditions Description (DCL sheet)
It will be sent to the ILN Engineering Department which, after technical validation, will be forwarded to the RENAULT Purchasing department (circuit and lead time for the D.C.L. Sheet available in Appendix 6.1 page 15).
Non-compliance with the specifications on behalf of the supplier (dimensions, quality of the packaging, non-compliant DCL sheet, etc.) will be subject to claims on the part of the ILN (Engineering or Quality Department) Any economic consequences will thus be assigned to the supplier.
2.1 Protective materials
Based on its vast experience and knowledge of parts, RENAULT is able to support the supplier in its choice of protective material. The following guide aims to present suppliers with a non-exhaustive list* of protective materials suitable for transport to the customer plant. * Other protective materials exist in addition to those listed in the table. If you need further information, please contact the ILN Engineering department.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
5555
2.2 Type of protection (a few examples of applications)
Type of packaging Characteristics of the part Example of relevant parts
No protective packaging required RENAULT standard label required
Part integrity guaranteed by its treatment (galvanised or painted bare part)
Exhaust silencer Spring Sub-frame
Polyethylene/Polypropylene (Plastic bag, douffline)
Weight/part 1kg
Electric cables Door facing Nuts Dashboard
Bubble wrap or bag
Part sensitive to impacts
Note: Flat side of the plastic protection in contact with the parts Plastic bubbles facing outward
Headlight Door lock
Corrosion prevention Film, VCI bag
Part sensitive to corrosion Unpainted, non-electrogalvanized part (see white paper on corrosion prevention)
Engine flywheel Nuts Screws
Cross/separator cardboard
Weight/part > 1kg Resistance to impacts Bracing of the part in its cell Improves vertical compressive strength Available with single or double groove
Starter Alternator
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
6666
2.3 Corrosion prevention
* Absolutely must refer to the information taken from the white paper available on the supplier portal: Chapter IX - Packaging - Corrosion prevention white paper
- All metal, mechanical and electrical parts must be protected. - The types of corrosion prevention are: Dry (VCI film, VCI dust cover, VCI bubble wrap, VCI foam pad) Oil-based (if there is a special recommendation) - Simple watertight protection in the package (toy tabbing, taping, etc.) - Desiccant sachet: The desiccant used is clay-based (natural) and does NOT contain aggressive chemical products; it can therefore be placed in direct contact with packaged parts, with no risk of corrosion.
A table to calculate the amount of desiccant to add to the packaging is available on the supplier portal Chapter IX - Packaging - Amount of desiccant calculation
The calculation is done in line with standard DIN 55474. The desiccant must be distributed evenly in the packaging.
- The products used must meet the white paper requirements. - According to the White Paper, the protection remains effective from 90 to 180 days depending on the flow.
Note: RENAULT reserves the right to request samples from suppliers in order to check the compliance of protective products.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
7777
2.4 Packaging densification
RENAULT is endeavouring to optimise the use of space in the ISO high cube maritime container through denser packaging.
To achieve a good level of densification of parts in the packaging, the supplier must adhere to the following calculation rule:
Calculation rule: Volume of the sum of the parts Packaging interior volume Part Length = 0.12m
Width = 0.125m Height = 0.08m Volume = 0.12x0.125x0.08 = 0.0012m3
Packaging
Length = 0.123m Width = 0.13m Height = 0.085m Volume = 0.123x0.13x0.085 = 0.00136 m3
Densification ratio = (0.0012/0.00136)x100% = (0.882)x100%=88.2%
The densification ratio absolutely must be as close as possible to 100% in compliance with the maximum authorised weight.
2.5 Container densification
To achieve a good level of container filling, the supplier must develop the packaging in accordance with the size given in the specifications and the packaging recommendation expressed by the engineering department. The proposed range of packaging is based on: - returnable package (metal Handling Unit or plastic Packaging Unit) - "disposable" cardboard packages or in exceptional cases in wooden packages (cardboard or wooden Handling Unit and cardboard Packaging Unit).
Reminder: 40-Foot High Cube container size Exterior: 12,192mm x 2,438mm x 2,900m Interior: 12,010mm x 2,340mm x 2,690mm (2,590mm to the door)
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
8888
3 General recommendations
3.1 Returnable packages
A commitment between RENAULT and the supplier must be co-signed prior to deploying the packages (see supplier portal, PVS (Packaging Visibility System) tool). These packages are strictly dedicated to the supply of parts to RENAULT plants. The supplier will use suitable handling equipment. It will have to manage the stock and ensure the cleanliness of these packages.
2 types of packaging available (Appendix page 18):
- Plastic cases that can be gripped by hand (PU) - Metal packages (HU)
The supplier shall, at RENAULT's request, use this type of packaging. The supplier will thus be informed at the time of requesting the DCL sheet. Finally, the allocation of returnable packaging will be RENAULT's responsibility.
3.2 Disposable packages
2 types of packaging available (Appendices page 16 and 17)
- Cardboard boxes that can be gripped by hand (PU) - Cardboard boxes clamped to the pallet (HU) - Exceptional case: Wood crates (HU).
Cardboard packaging is to be preferred to the wooden packaging given the cost of materials and ergonomic constraints. Nevertheless wooden packaging offers greater resistance and is therefore appropriate for packaging heavy parts.
3.2.1 Cardboard packaging units (PU):
Standard composition (packaging size and resistance compliant with PU cardboard pads)
Cardboard box with bell cover The outside cover of the cardboard box absolutely must be made of KRAFT. By way of an exception, we accept the use of 1,000 or 1,200mm cardboard boxes provided that the part measures approx. 1,000 or 1,200mm. The packaging must be closed by plastic strapping or adhesive tape, excluding staples and metal ties. The use of PVC adhesive tape is prohibited.
Maximum weight: 15 kg max. Exception: package size > 1,000mm: 10 kg max.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
9999
Additional surface and closing of the cardboard box packaging (example for oxidisable parts)
Palletising (PU or HU rounded delivery)
Standard composition
Wood compliant with Standard ISPM No. 15* (marking of the pallet on 2 opposite sides) Dimensions: 1,200 x 1,000 x 145,5 bases Softwood choice 2. Maximum humidity 17%. Debarked timber. Assembly using three 60mm nails twisted at each intersection. Pallet diagram: www.galia.com
The load must be distributed over the surface of the pallet. The palletised load may not extend beyond the surface of the pallet. The successive layers must be superimposed. The superimposed stacking provides greater vertical compressive strength. All deliveries must be made by full and single reference* bed *excluding PU rounded delivery
The block thus formed must not exceed the height of 1,250 mm (pallet included). Weight 250 kg max. (unless exempt by the ILN Engineering department concerned if heavier) All cardboard boxes must be grouped together on the wooden pallet and joined by covering or stretch
wrapping. ILN reserves the right to request additional protection to reinforce the safety of parts (opaque film, etc.) If the supplier deems it necessary, it may also add cardboard corner pieces and a lid as shown in the picture in order to strengthen the assembly.
Position the VCI bag and parts Line the parts with hermetically-sealed VCI Tape the VCI
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
10101010
3.2.2 Cardboard Handling Units:
Standard composition (more technical information on the supplier portal: Overseas standard cardboard packages range)
Wooden pallet perimeters, 4 lead-ins (except 4C 1,140mmx475mmx640mm packaging) Wood compliant with ISPM No.15 Softwood choice 2. Maximum humidity 17%. Debarked timber. With or without lid depending on model Semi-American cardboard casing Inner belt Bell lid KRAFT cardboard outer lid The types of packages shall be marked on the packaging.
The cardboard box must be secured to the pallet. Toy tabbing attachment is used. Wooden reinforcements, if necessary, are toy tabbed to the cardboard box.
Additional surface and closing of the cardboard box packaging (example for oxidisable parts)
- Handling Unit
Unfold the kit and position the belt Position the VCI dust cover (Take care not perforate the cover)
Line the parts with hermetically-sealed VCI Tape the VCI
Fit the lid and fasten
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
11111111
There are 2 ways to attach the lid to the packaging. Depending on the supplier's resources, the lid may either be:
+ Toy tabbed at the places provided for this purpose
Or...
+ Strapped with plastic strips. The fact of strapping the pallet and cardboard box simultaneously makes the module more resistant during handling by forklift. + The strips must not be placed under the pallet. + PVC and metal strips are prohibited. + The strip must be sealed, either by a seam, or a plastic or metallic u-clip. + Reinforcements may be put between the lid and the strip.
Storage
The heaviest packaging must occupy the lower level.
* Special case: It is essential to add 4 cardboard corner pieces in the angles between the casing and belt for cardboard packages weighing more than 400 kg. The length of the corner pieces will be the same as the height of the cardboard box belt.
Stacking (rule used in ILNs) for information.
The set of packages being transported supports a maximum dynamic load of 750 kg.
The stacked total height for transport (including the lower load), shall not exceed 2,550 mm.
* Further information on stacking, storage of disposable and sustainable packaging on the supplier portal: Chapter XII - Preparation of shipments - Overseas Packages leaving ILN
X 4
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
12121212
3.2.3 Disposable wooden packaging:
Standard composition
ISO HC (High Cube) container fraction Quality of the wood compliant with ISPM No.15 Marking of the pallet on 2 opposite sides Softwood choice 2. Maximum humidity 17%. Debarked timber
4 Packaging identification
4.1 Label characteristics
All packaging must be labelled.
These labels will comply with the standard in force (confer with standards ETI.1, ETI.9 see ETI.8, etc.)
(ETI.8 standard international example below):
The label should be positioned on the side of packaging grip (case of the marine container) It will not, under any circumstances, be glued to the edge of the packaging. The label may not be used as a means of closure. The label must be resistant to climatic conditions. The label must not cover the markings.
* For further information: label sizes, layout of the data areas, printing specifications and barcodes, refer to the standard at the following address: www.galia.com
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
13131313
4.2 (Mandatory) marking
All cardboard box packages delivered will be stamped:
LNE according to the C18 or C27 Technical regulation or foreign equivalent
RESY (recyclable packaging)
4.3 Symbols (if necessary)
Centre of gravity of the packaging
Keep dry
Fragile
Comments
The ink used should be as neutral as possible for the environment. It should therefore not contain heavy metals.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
14141414
5 Logistics Conditions Description (DCL)
5.1 Responsibilities:
The supplier shall: Follow the imparted packaging recommendation Follow the specifications and corrosion prevention white paper Make the parts denser in the packaging. Use the DCL sheet in ENGLISH and write it up exclusively in ENGLISH: - Technical description, photos of the packaging and costs of related materials, + labour for RNPO.
The ILN Engineering department shall: - validate the DCL sheet technically for 1st delivery (parts in bulk in the package: screws, plastic clips, etc.) but
it may, in some cases, be called into question by the final customer. - Refuse the DCL sheet, where necessary, and add comments as well as any proposals for improvement. If necessary, the Engineering department may provide assistance to fill out the form. The completeness and accuracy of the information is essential to draft the DCL. Without these aspects, ILN's technical validation will not be granted.
5.2 Fill out the DCL sheet - important points
- The instruction manual inside the tab helps the supplier fill in all the fields.
Important points:
- The ILN text box absolutely must be checked (above). - Clearly indicate all the packaging materials and price-related information - Always provide the outer dimensions of the packaging - The DCL sheet must include the pictures to visualise the packaging at the various stages of preparation:
- packaging empty - packaging being filled - packaging filled
In some cases, the Engineering department may accept scans (for parts under study).
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
15151515
6 Appendices
6.1 DCL sheet process
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
16161616
6.2 Disposable cardboard box packaging
6.2.1 Conditioning Units
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
17171717
6.2.2 Handling Units
Ext. Int. Plein Ext. Int. Plein Ext. Int. Plein Ext. Int. PleinLong 1140 1096 UCM/UT 192 Long 1140 1082 UCM/UT 72 Long 1740 1701 UCM/UT 24 Long 2280 2240 UCM/UT 20Large. 475 435 Plein statique 6/1 Large. 950 919 Plein statique 4/1 Large. 1140 1100 Plein statique 3/1 Large. 1200 1110 Plein statique 3/1Haut . 640 505 C. Utile (kg) . 750 Plein dynamique 3/1 Haut . 850 710 C. Utile (kg) .1000 Plein dynamique 2/1 Haut . 1250 1110 C. Utile (kg) . 750 Plein dynamique 1/1 Haut . 1270 1100 C. Utile (kg) .1500 Plein dynamique 1/1
RCV 2000 daN RCV 2300 daN RCV 2000 daN RCV 4000 daNVol (M). 0,347 0,241 Vol (M). 0,921 0,701 Vol (M). 2,480 2,048 Vol (M). 3,475 2,735
Ext. Int. plein Ext. Int. Plein Ext. Int. Plein Ext. Int. PleinLong 1140 1082 UCM/UT 96 Long 1450 1413 UCM/UT 48 Long 2280 2240 UCM/UT 96 Long 2280 2240 UCM/UT 40Large. 950 919 Plein statique 6/1 Large. 1140 1086 Plein statique 4/1 Large. 950 870 Plein statique 7/1 Large. 1200 1100 Plein statique 6/1Haut . 640 505 C. Utile (kg) .1000 Plein dynamique 3/1 Haut . 850 710 C. Utile (kg) .1000 Plein dynamique 2/1 Haut . 320 172 C. Utile (kg) .1000 Plein dynamique 7/1 Haut . 640 492 C. Utile (kg) .1500 Plein dynamique 3/1
RCV 2300 daN RCV 2300 daN RCV 3000 daN RCV 4000 daNVol (M). 0,693 0,502 Vol (M). 1,405 1,082 Vol (M). 0,693 0,335 Vol (M). 1,751 1,212
Ext. Int. plein Ext. Int. Plein Int. Plein Int. PleinLong 1450 1414 UCM/UT 64 Long 1740 1701 UCM/UT 36 Long 2280 2240 UCM/UT 48 Long 1740 1701 UCM/UT 48Large. 1140 1086 Plein statique 6/1 Large. 1140 1100 Plein statique 4/1 Large. 950 870 Plein statique 6/1 Large. 1140 1100 Plein statique 6/1Haut . 640 505 C. Utile (kg) .1000 Plein dynamique 3/1 Haut . 850 710 C. Utile (kg) .1000 Plein dynamique 2/1 Haut . 640 492 C. Utile (kg) .1000 Plein dynamique 3/1 Haut . 640 505 C. Utile (kg) .1000 Plein dynamique 3/1
RCV 2300 daN RCV 2300 daN RCV 3000 daN RCV 2300 daNVol (M). 1,058 0,775 Vol (M). 1,686 1,328 Vol (M). 1,386 0,959 Vol (M). 1,270 0,945
8L3G
Dimensions (mm) Quantits Transportes Gerbage UCM
Dimensions (mm) Quantits Transportes Gerbage UCM
5K ,
Quantits Transportes Gerbage UCM
Dimensions (mm)Dimensions (mm) Quantits Transportes Gerbage UCM
3E 4L
4C 3P 2E
Dimensions (mm) Quantits Transportes Gerbage UCM
4H
Dimensions (mm) Quantits Transportes Gerbage UCMDimensions (mm) Quantits Transportes Gerbage UCM
Dimensions (mm) Quantits Transportes Gerbage UCM
4G
Dimensions (mm) Quantits Transportes Gerbage UCM
9K ,
Dimensions (mm) Quantits Transportes Gerbage UCM
Dimensions (mm)
Quantits Transportes Gerbage UCM
4E
Dimensions (mm) Quantits Transportes Gerbage UCM
CAR-S*2990 CAR-S*2992 CAR-S*3615 CAR-S*3624
CAR-S*3573 CAR-S*3567 CAR-S*3616
CAR-S*3565 CAR-S*2991 CAR-S*3530 CAR-S*3631
CAR-S*3729
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
18181818
6.3 Returnable Packing
Plastic case Packaging Unit Metal packaging Handling Unit
Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein VideLong 560 515 UC/UCMT 18 84 Transport 1/1 1/1 Long 560 520 UC/UCMT 36 102 Transport 1,1 1,1 Long 386 346 UC/UCMT 72 204 Transport 1/1 1/1Large. 386 350 UCM/UT 40 40 stockage 4/1 4/1 Large. 386 350 UCM/UT 40 40 stockage 4,1 4,1 Large. 280 245 UCM/UT 40 40 stockage 4/1 4/1Haut . 334 323 Tare(kg) 2,65 Haut . 171 160 Tare(kg) 2,08 Haut . 171 160 Tare(kg) 1,195Haut repl..78 C. Utile (kg) . 15 Haut repl..62 C. Utile (kg) . 15 Haut repl..62 C. Utile (kg) . 15RCV 2000 daN RCV 2300 daN RCV 2000 daNVol (M). 0,072 0,580 Vol (M). 0,037 0,029 Vol (M). 0,018 0,014
Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein VideLong 1180 1118 UCM/UT 80 240 Transport 3/1 11/1 Long 1180 1128 UCM/UT 60 220 Transport 2/1 10/1 Long 1480 1428 UCM/UT 48 160 Transport 3/1 9/1Large. 1140 1078 Tare(kg) 90 stockage 8/1 23/1 Large. 1140 1078 Tare(kg) 104 stockage 6/1 21/1 Large. 1140 1078 Tare(kg) 148 stockage 6/1 19/1Haut . 660 511 C. Utile (kg) .1000 Haut . 860 703 C. Utile (kg) .1000 Haut . 860 695 C. Utile (kg) .1000Haut repl..242 D110900038 Haut repl..267 D110900036 Haut repl..292 D110900045RCV 2300 daN D110900039 RCV 2300 daN D110900037 RCV 3000 daN D110900036Vol (M). 0,888 0,621 D110900040 Vol (M). 1,157 0,855 D110900040 Vol (M). 1,451 1,070 D110900044
RV5 DRY
RV5 HC
Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein Vide Ext. Int. Plein Vide Plein VideLong 1180 1128 UCM/UT 40 220 Transport 1/1 10/1 Long 2270 2215 UCM/UT 20 140 Transport 1/1 13/1 Long 2270 2215 UCM/UT 20 120 Transport 1/1 11/1Large. 1140 1078 Tare(kg) 116 stockage 4/1 21/1 Large. 1170 1100 Tare(kg) 184 stockage 4/1 27/1 Large. 1170 1100 Tare(kg) 202 stockage 4/1 23/1Haut . 1090 940 C. Utile (kg) .1000 Haut . 1090 955 C. Utile (kg) .1200 Haut . 1270 1135 C. Utile (kg) .1200Haut repl..267 D110900016 Haut repl..220 Haut repl..240 D110900033RCV 2300 daN D110900016 RCV 2300 daN D110900016 RCV 3000 daN D110900032Vol (M). 1,466 1,143 D110900040 Vol (M). 2,895 2,327 D110900035 Vol (M). 3,373 2,765 D110900035
Dimensions (mm) Quantits Transportes
Bac C4
Quantits Transportes Gerbage UCM Dimensions (mm)
RV8 . RV6 . RVX .
Gerbage UCM Dimensions (mm) Quantits Transportes Gerbage UCM Dimensions (mm) Quantits Transportes Gerbage UCM
1420 x 1080
Quantits Transportes Gerbage UCM
RV7 .
Dimensions (mm)Dimensions (mm) Quantits Transportes Gerbage UCM Gerbage UCMDimensions (mm) Quantits Transportes
Bac C1 Bac C3
Dimensions (mm) Quantits Transportes Gerbage UCM Dimensions (mm) Gerbage UCM
Habillage Carton
Intercalaire
Habillage Carton
Intercalaire
Quantits Transportes
Habillage CartonCot
EmboutIntercalaire
1040 x6701005 x 670
1115 x 1065
Habillage Carton Habillage CartonCot
Habillage Carton Habillage CartonCot
EmboutIntercalaire
1340 x 6601040 x 670
Habillage Carton
Intercalaire
1040 x 4651005 x 465
CotEmbout
Intercalaire
1115 x 1065
1115 x 1065
Habillage Carton
Intercalaire
1040 x 8901040 x 890 1040 x 890
CotEmbout
1080 x 22001100 x 10301100 x 2130
EmboutIntercalaire 1080 x 2200
EmboutIntercalaire
Cot
CKD---ORC4CKD---ORC3CKD---ORC1
CKD---HCTX
CKD---1HC5
CKD---HCT6
CKD---10T5
CKD---HCT8
CKD---10T7
R100 452 359 ou D110 720 050R100 367 517 ou D110 720 020R100 360 431 ou D110 720 030
R100 341 093 ou D110 720 010
R100 368 416 R100 368 417 R100 368 418
R100 360 430 ou D110 720 040 R100 439 393 ou D110 720 000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
19191919
6.4 Copy of DCL sheet part 1/2
M :
Phone : Dpt :Internal adress (API) Fax :Email
SUPPLIER PART OR PRODUCTSupplier name :Supplier account number :Contact :Phone Number :Manufacturing plant :Dispatch plant :
Supplier specific HU Pallet assembly Renault specific HUStandard durable HU Supplier specific HU
Other :
Dimensions Weight Qty Price PriceL x W x H (mm) (kg) / PU Unit / PU
1
Dimensions Material Weight Type Qty Price PriceL x W x H (mm) (kg) / HU Unit / HU
Estimeted Confirmed1
Palettization L3P-CPL2 L3P-S Synchronous Other ( ILN )
Time (min)
0,00
INCOTERMS: MEANSShipping cost per truck :
Technical Agreement Purchasing Agreement
Name : Name :
Position : Position :Date: Date:
TRANSPORT
Partname
0,0000 /UMLabour rate (per Hour):
Version 2.0.0 -03/10/2011 -OMRMSC - STD - FR - 2010 - 0008
The cost should be included on ''Selling price DDP '' ou ''FCA selling price '' from the Standard Quotation Sheets
Transit place (if any): Return place for empty packaging :
IF THE INCOTERM D.D.P or F.C.A DUNNAGE MATERIAL COST PER PART : 0,0000 /Part
Signature Signature
TOTAL COST PER PART ( including Material + Labour cost + Shipping cost) Dont't report on the RFQ 0,0000 /Part
Delivery frequency assumption : 0,0000 /UM
Labour cost per HU :
Empty packaging frequency return assumption :Shipping cost per HU:
PU in this line
0,0000 /UM
Parts qty per HU :
Detailed description of Packaging Unit (PU), including dunnages
0,000 /UT
Partname Material Type
TYPE OF FLOW
Rate
RETURN TO :
RENAULT - PURCHASING DEPARTMENT
Copy to send to your logistic contact
Part name :Part number :Generic Part number :Weight (kg):
PACKAGINGDistance / Dispatch plant :Delivery plant (s) :
Nb of minutes par Handing Unit (HU )
Total HU Price :Total HU Weight:
Parts qty per PU :
To report to ''Purchase finished product packaging'' from Standard Quotation Steets 0,0000 /Part DUNNAGE MATERIAL COST PER PART :
PACKAGING LABOUR COST BREAKDOWNDescription of operations
0,0000 /UC0,000 Kg/UC Total PU Price :
Rate
Total PU Weight :
PU in this line
Detailed description of Handling Unit (HU), including dunnages
0,000 Kg/UM
The suppliers commits to propose here the packagin in compliance with Renault specifications number. 29300/04/MC.
ILN
SERIE
Road Trai Air Sea
PACKAGING DATA SHEET
(P.D.S)Creation date PDS :Last update PDS :
GFE Code : Packaging Ecological Index : PROJECT (Vh/eng) Currency unit :
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
20202020
6.4 Copy of DCL sheet part 2/2
M :
Phone : Dpt :Internal adress (API) Fax :Email
Supplier name :Supplier account number :Contact :Phone Number :Manufacturing plant :Dispatch plant :
Supplier specific HU Pallet assembly Renault specific HUStandard durable HU Supplier specific HU
Other :
PACKAGING
Photos Empty Packaging
Photos 50 % Filled Packaging
Photos 100 % Filled Packaging
RMSC - STD - FR - 2010 - 0008 Version 2.0.0 -03/10/2011 -OM
Delivery plant (s) :Distance / Dispatch plant :
Generic Part number :Weight (kg):
Part name :Part number :
RETURN TO :
RENAULT - PURCHASING DEPARTMENT
Copy to send to your logistic contact
SUPPLIER PART OR PRODUCT
The suppliers commits to propose here the packagin in compliance with Renault specifications number. 29300/04/MC.
PACKAGING DATA SHEET
(P.D.S)ILN
SERIE
Click there to add a photo Click there to add a photo
Click there to add a photo Click there to add a photo
Click there to add a photo
Delete Photo Delete Photo
Delete Photo Delete Photo
Delete Photo Delete Photo
Creation date PDS :
Last update PDS :
GFE Code : Packaging Ecological Index : PROJECT (Vh/eng) Currency unit :
Click there to add a photo
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
21212121
6.5 Glossary
ISPM15: International Standards for Phytosanitary Measures No.15
VCI: Vapour Corrosion Inhibitor
BOP: Bought Out Parts
BIP: Built In Parts
ILN: International Logistics Network
RNPO: Renault-Nissan Purchasing Organization
IPO: Individual Part Order
DCL: Logistics Conditions Description
PU: Packaging Unit
HU: Handling Unit
Supplier portal (Supplier logistics manual): interactive RENAULT website
* More logistics abbreviations on the supplier portal: Chapter XIX: Glossary
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
22222222
6.6 High cube cardboard box Packaging range
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
23232323
TYPE REFERENCE
SACIM D110 100 027
PACKAG TABLE
4C
CAR-S*3565
DIMENSIONS Pallet max. outer (mm) included 1,140 x 475 x 640
Min. inner (mm) 1,096 x 435 x 505
Useful volume (dm3) 243 dm3
Tare (Kg) estimate 17 CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C) g/m2
Minimum gsm of each TT component = of the corrugated cardboard g/m2
TT (J) dynamic perforation DF & DD bursting
Min. thickness (mm)
CASING 3,350 390 110 1,080
BELT 50.5 1,400 20 12.5
LID 3,350 390 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,000 daN 750 Delivery of the belt above the folded casing.
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
24242424
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
25252525
TYPE REFERENCE
SACIM D110 100 007
PACKAG TABLE
4H
CAR-S*2990
DIMENSIONS Pallet max. outer (mm) included 1,140 x 950 x 640
Min. inner (mm) 1,082 x 919 x 505
Useful volume (dm3) 507 dm3
Tare (Kg) estimate 20
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 3,050 320 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
26262626
TYPE REFERENCE
SACIM
D110 100 008
PACKAG TABLE
3P
CAR-S*2991
DIMENSIONS Pallet max. outer (mm) included 1,140 x 950 x 850
Min. inner (mm) 1,082 x 919 x 710
Useful volume (dm3) 705 dm3
Tare (Kg) estimate 21
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 3,050 320 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000 2 swing arms (dimensions 600 x 200 mm)
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
27272727
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
28282828
TYPE REFERENCE
SACIM D110 100 009
PACKAG TABLE
3G
CAR-S*2992
DIMENSIONS Pallet max. outer (mm) included 1,450 x 1,140 x 850
Min. inner (mm) 1,413 x 1,086 x 710
Useful volume (dm3) 1,089 dm3
Tare (Kg) estimate 27
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 3,050 320 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000 Two 600 x 200 mm swing arms
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
29292929
TYPE REFERENCE
SACIM D110 100 035
PACKAG TABLE
4G
CAR-S*3573
DIMENSIONS Pallet max. outer (mm) included 1,450 x 1140 x 640
Min. inner (mm) 1,414 x 1,086 x 505
Useful volume (dm3) 783 dm3
Tare (Kg) estimate 26
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 3,050 320 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
30303030
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
31313131
TYPE REFERENCE
SACIM D110 100 019
PACKAG TABLE
3E
CAR-S*3567
DIMENSIONS Pallet max. outer (mm) included 1,740 x 1,140 x 850
Min. inner (mm) 1,701 x 1,100 x 710
Useful volume (dm3) 1,328 dm3
Tare (Kg) estimate 33
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 4,220 540 110 1,350
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000 Two 900 x 200 mm swing arms
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
32323232
TYPE REFERENCE
SACIM D110 100 190
PACKAG TABLE
4E
CAR-S*3729
DIMENSIONS Pallet max. outer (mm) included 1,740 x 1140 x 640
Min. inner (mm) 1,701 x 1100 x 505
Useful volume (dm3) 954 dm3
Tare (Kg) estimate 31
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Standard Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 4,220 540 110 1,350
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,300 daN 1,000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
33333333
TYPE REFERENCE
SACIM D110 100 018
PACKAG TABLE
2E
CAR-S*3530
DIMENSIONS Max. outer (mm) pallet included 1,740 x 1140 x 1250
Min. inner (mm) 1,701 x 1100 x 1110
Useful volume (dm3) 2,048 dm3
Tare (Kg) estimate 36
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Standard Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 2,690 400 110 945
BELT 50.5 1,400 20 12.5
LID 4,220 540 110 1,350
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 4 For transport and folded delivery (static stacking)
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
2,000 daN 750 2 swing arms (dimensions 900 x 500 mm)
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
34343434
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
35353535
TYPE REFERENCE
SACIM D110 100 028
PACKAG TABLE
8L
CAR-S*3615
DIMENSIONS Pallet max. outer (mm) included 2,280 x 950 x 320
Min. inner (mm) 2,240 x 870 x 172
Useful volume (dm3) 335 dm3
Tare (Kg) estimate 27
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
BASE 4,740 590 110 1,575
LID 4,740 590 110 1,575
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET
REINFORCEMENTS
ISPM 15
< 17 %
Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES REINFORCEMENTS
Cardboard Wood
Qty 4 Qty 6
For transport and folded delivery (static stacking) Dimensions 27 x 80 x 172 ISPM 15
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
3,000 daN 1,000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
36363636
TYPE REFERENCE
SACIM D110 100 029
PACKAG TABLE
4 L CAR-S*3616
DIMENSIONS Pallet max. outer (mm) included 2,280 x 950 x 640
Min. inner (mm) 2,240 x 870 x 492
Useful volume (dm3) 959 dm3
Tare (Kg) estimate 31
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
BASE 4,740 590 110 1,575
BELT 4,740 590 110 1,575
LID 4,740 590 110 1,575
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET
REINFORCEMENTS
ISPM 15
< 17 %
Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES REINFORCEMENTS
Cardboard Wood
Qty 4 Qty 6
For transport and folded delivery (static stacking) Dimensions 27 x 80 x 492 mm ISPM 15
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load Additional information
Assembled BOX
3,000 daN 1,000
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
37373737
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
38383838
TYPE REFERENCE
SACIM D110 100 036
PACKAG TABLE
5K CAR-S*3631
DIMENSIONS Pallet max. outer (mm) included 2,280 x 1200 x 1270
Min. inner (mm) 2,240 x 1110 x 1100
Useful volume (dm3) 2,735 dm3
Tare (Kg) estimate 47
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both outer surfaces (C)
g/m2
Minimum gsm of
each TT component = of the
corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
DIMENSION 50.5 1,400 20 12.5 END PIECE 3,760 390 110 1,305 Bottom plate 3,760 390 110 1,305
LID 3,050 320 110 1,080
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
REINFORCEMENTS
Wood Qty 8 Dimensions 27 x 80 x 1,100 mm
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive
Strength (RCV)
Content max. load
Additional information
Assembled BOX
4,000 daN 1,500
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
39393939
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
40404040
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
41414141
TYPE REFERENCE
SACIM D110 100 039
PACKAG TABLE
9K
CAR-S*3624
DIMENSIONS Pallet max. outer (mm) included
2,280 x 1,200 x 640
Min. inner (mm) 2,240 x 1,110 x 492
Useful volume (dm3) 1,212 dm3
Tare (Kg) estimate 41
CHARACTERISTICS OF THE CORRUGATED CARDBOARD COMPONENTS
Description Classification parameter
DF&DD=(4C+E) TT =ECTx ep
Sum of the gsm of both
outer surfaces (C) g/m2
Minimum gsm of
each TT component = of the corrugated cardboard g/m2
TT (J) dynamic
perforation DF & DD bursting
Min. thickness
(mm)
CASING 4,220 540 110 1,350
BELT 4,740 590 110 1,575
LID 4,740 590 110 1,575
Outer lid absolutely must be Kraft cardboard.
CHARACTERISTICS OF WOODEN COMPONENTS
Description Standard Humidity Additional information
PALLET ISPM 15 < 17 % Bark-free 2nd grade softwood
REINFORCEMENTS
CHARACTERISTICS OF OTHER COMPONENTS
Description Material Other Additional information
BRACES Cardboard Qty 6 For transport and folded delivery (static stacking) REINFORCEMENTS
Wood Qty 12 Dimensions 27 x 80 x 510 mm
CHARACTERISTICS OF THE WHOLE
Description Vertical Compressive Strength (RCV)
Content max. load
Additional information
Assembled BOX
4,000 daN 1,500
-
Division name: DFLM Date: 12/12/2012 RPIFSLRSC20120030 Department name: DIFIP RENAULT PROPERTY
OVERSEAS packaging specifications for parts suppliers
42424242