CompanyIntroduction

Nitek linear motors is the NISE srl linear motor division and it is focused on design, production and distribution of linear system for industrial application. Our customers are manufacturers of automatic machines that integrates our product in their automation and control systems.

Our product are standardized and are on stock for short delivery time. Our international partners help us to better support our customers in any countries.

The headquarter of Nitek linear motors is based in Calderara di Reno (Bologna) Italy in the Industrial Bargellino Area where production plant, technical department and commercial office are present. Nise srl distributes product under brand name NITEK as registed brand name.

History of Nitek Linear motors

Nitek linear motors was founded as indipendent (Nitek srl) focused on design on innovative product in the linear motion, in particular tubular linear motors.20082008

Nise srl acquired Nitek srl becoming Nitek linear motors division.20102010Green Drive tubular linear motors standard series was released on the market and an agreement with manufacturing plants in Czech Republic was signed for the production of the Ironcore L series.

20112011

20132013 Patent applications for Rotolinear and Integrated motor feedbackNitek registered mark in China

20122012 ISO 9001:2000 Certification from DNVNitek registered mark in Italy

System Integrators and partners Worldwide

TECHNOLOGY BACKGROUNDEU Linear motor evolution

FirstLinear motor

photo

1845

1968

Firstcommercial

Thyristortechnology

1980

FirstasynchronousLinear motor

From Mannesmann

Demag

1985

High performance NdFeB

Magnets availableOn the market

1992

SiemensIndramat

commercializeIroncore Linear

motors

1997

Linmot (CH) & Lineadrives (GB)

Commercialize tubular linear motor

2009

NISE (IT)realised the

first tubular linear motor in Italy

today

TECHNOLOGY BACKGROUNDLinear motor tree

LINEAR MOTOR

Synchronous Asynchronous

Ironless IroncoreIronlessIronless

Tubular U-shaped Tubular Flat bed

Ironcore Flat bed

TECHNOLOGY BACKGROUNDfrom rotary to linear / tubular linear

Iron Lamination or plastic support for coil Magnets

TECHNOLOGY BACKGROUNDfrom rotary to linear / tubular linear

UVW

Class H three phase windingsNo contact between slider and coil

Large airgap

Igus X seriesLinear bearing on flange(replacable)

Integrated Encoder

Stainless Steel AISI 304 shaftWith NdFeBr permanent magnets

Rotatable connector for signal and power

Green Drive Tubular Linear motor structure

PRODUCT LINEfrom building block to complete systems

Green Picker 2DGreen Picker Linear Delta 3D/4DGreen Drive Gantry 2D

Green Drive StandardGreen Drive ISOGreen Drive HygienicGreen Drive RotolinearGreen Drive Stage

Green Drive N seriesL series flat ironcore

Complete actuatorComplete actuator

Complete systemComplete system

Building blockBuilding block

RoboticsRobotics

P&PP&PSingleSingleAxisAxis

Co

mp

lete

mac

hin

eC

om

ple

te m

ach

ine

SingleSingleAxisAxisMfgMfg

PRODUCT LINEMarket positioning

Number of applicationNumber of application

Axi

s p

reci

sio

nA

xis

pre

cisi

on

Ultra high precision< 0,1 µm

high precision< 10 µm

low precision< 100 µm

+

+

Machine toolEDM machines

Cutting machine

Pick and placePneumatic replacement

GREEN DRIVE STANDARD

GD16 D/T/Q

Flange 66 x 66 mmPeak force upto 176 N

GD25 DS/TS/XS

Flange 88 x 88 mmPeak force upto 800 N

Mounting by nuts in T-slots : dimension M5/M6/M8IP65 ProtectionCompatible with many servo drives on the marketRotatable connector from Intercontec (Germany)

Green Drive accessories

Antirotation with pneumatic brake

Antirotation with standard linear guides

GREEN DRIVE ISO

GDI25/35 TS/XS/ES

Flange 70 x 70 mmPeak force upto 2000 N

Compatible with ISO 15552 pneumatic dimensionsIP65 ProtectionFixing by holes in the flangeCompatible with many servo drives on the marketRotatable connector from Intercontec (Germany)Other model GD25 available with the same flange

GREEN DRIVE HYGIENIC

GDI16 D/T/QFlange 66 x 66 mmPeak force upto 120 N

GDI25 DS/TS/XSFlange 88 x 88 mmPeak force upto 560 N

Completely in stainless steel materialIP69KWashableFixing by holes in the flange

ROTOLINEAR GDR16/25 D/T/QFlange 66x66 or 88 x 88 mmPeak force upto 800 NPeak torque upto 11,8 Nm

Rotative brushless motor with rotary ball spline precision bearing from Japanese manufacturer.High rigidity and precision of shaftIndependent motion of rotation and linear part.Stroke upto 200 mm

GREEN DRIVE STAGE

GDM25Peak force upto 704NStroke upto 2000 mm

Carriage guided by linear guide Integrated encoder system

GREEN DRIVE N SERIES (special version)to replace ballscrews

N250SS/DS/TS/QS/XSFlange 50 x 50 mmPeak force upto 704 N

Motor without bearings and encoderEspecially designed for stage integration No contact: Airgap from 0.5 to 0.75 mmNeed external linear guideNeed external encoder magnetic or opticNeed external encoder magnetic or optic

Robotics:: Green Drive Linear Delta Robot 2D

Cost effective Pick and place applicationWithout cable in motionVery compact designPayload upto 1.5 Kg

Robotics : Green Drive Linear Delta Robot

3 axis and 3 axis with rotationExpecially design to lowering the cost of delta robotMinimazing the mechanical parts.Payload upto 3 Kg.

L SERIES IRONCOREL030,L050,L075,L100,L150,L200,L250

Peak force upto 15750 N

IP55 and IP68 versionMagnet track in different lengths: (1024,512,256,128 mm)

PRODUCT PLANTS AND LOCATIONS

GREEN DRIVE- Produced in Italy- 20-30 motors per week- 100% of product test - 2 to 4 weeks standard delivery time- In house R&D and testing

L series Ironcore- Produced in Czech Republic- 100 motors per week- 100% of product test- 4-6 weeks standard delivery time

Nitek linear motors are compatible with these servo drives brands:Nitek linear motors are compatible with these servo drives brands:

NITEK is also able to provide own servo drive solution, please visit this link: http://www.nitek.it/servo-azionamento-mbd-nitek---make-move_prd_pr3_48_98_ita.aspx

Main differences between Linmot standard series and Nitek

Parameter Nitek Green Drive Linmot standard series

Winding type 3 phase 230 or 400 VAC

2 phase80 VDC(need line transformer)

Encoder type Standard SIN/COS 1VppIncremental ABBiSS interface

Non standard SIN/COS

Thermal performance Upto H class (180°C)Nominal force is measured wihtout additional heat sink

Class E (100°C)Need aluminium extrusion profile to reach nominal force

Compatibility with servo drive

Full Not compatible(Need own drive)

Bearings Replacable Igus X series

Non replacable “Delrin” material used to guide the slider

Rod construction Using fixing screwRepairable

Usign epoxy Not repairable

Fixing Full set of accessories for linear guides and ball bushUsing T-slots

Limited solution based on ball bushing

Important links:Important links:

1. website: 1. website: www.nitek.itwww.nitek.it2. product images: 2. product images: http://www.pinterest.com/niteklinear/http://www.pinterest.com/niteklinear/3. product video: 3. product video: http://www.youtube.com/user/nitekadmhttp://www.youtube.com/user/nitekadm4. product and events information:4. product and events information:

https://twitter.com/nisenitekhttps://twitter.com/nisenitek5. company information and peoples:5. company information and peoples:

http://www.linkedin.com/company/nise-srlhttp://www.linkedin.com/company/nise-srl6. catalogues:6. catalogues:

http://www.nitek.it/download_dwn_dl6_ita.aspxhttp://www.nitek.it/download_dwn_dl6_ita.aspx7: application examples:7: application examples:

http://www.nitek.it/applicazioni_pag_pg17_ita.aspxhttp://www.nitek.it/applicazioni_pag_pg17_ita.aspx

Websmart web-based online sizing Tool from NITEKWebsmart web-based online sizing Tool from NITEKhttp://websmart.nitek.ithttp://websmart.nitek.it