new standard! metal mini-photoeye

LR-Z SER

IES

PR-M

/F SERIE

S

01 02

PR-M/FSERIES

NEW

New Standard for Photoelectric Sensors

Self-contained MiniaturePhotoelectric Sensor

New Standard!Metal Mini-Photoeye

2

SERIESPR-M/F

Self-contained Miniature Photoelectric Sensor

NEW

Optimizing miniature photoelectric sensorsConventional miniature photoelectric sensors typically do not provide long term reliability due to weak structural design and unstable operation. In order to solve these issues, operation stability features including background suppression and automatic cross talk prevention have been combined with a heavy duty metal housing to create a better miniature photoelectric sensor.

Background suppression and Automatic cross talk prevention

Resin filled, Stainless steel body (SUS316L)

Simple installation and No sensitivity adjustment required

EASE OF USE

DURABLE & LONG LIFE

STABLE OPERATION

4

5XResin filled, Stainless steel body (SUS316L)

More resistant toimpact than conventional models

DURABLE & LONG LIFE

5

Resin filling

Conventional m

odel

Cross-sectional view

SUS316L

81%reduction

20mm 0.79''

4.5mm0.18''

The “hybrid structure”, featuring a resin filled, SUS316L stainless steel body, was designed to achieve approximately five times greater shock resistance*. The heavy duty body of the PR-M/F is also highly resistant to oils, acids, and alkaline detergents and can be used in harsh environments due to its NEMA and IP rated enclosure. These features, combined with an 81 percent reduction in size*, result in the smallest, most durable miniature photoelectric sensor in its class. * Comparison with conventional models.

Smallest stainless steel photoelectric sensor in its class

<Hybrid structure > Stainless steel (SUS316L) + Resin filled body

5XShock

resistance

Compared to conventional

models

greater

The smallest metal photoeye in its class

IP67/69K,NEMA 4X,6P,13 Cable protection

100K1KDC 150K 200K 250K

LED lighting

LightFrequency

(Hz)Incandescent/fluorescent lighting

Sunlight

300K 350K

Normal operation range for common photoelectric sensorsApprox. 150 kHz

Normal operation range for the PR-M/F SeriesApprox. 300 kHz

6

Background suppression and Automatic cross talk prevention

30 mm1.18''/15 mm0.59''

STABLE OPERATIONThe PR-M/F Series improves detection stability, compared to conventional miniature photoelectric sensors, while maintaining ease of use. This sensor operates on a much higher light emitting frequency than most light sources, which greatly increases its immunity to ambient light. Combined with its built-in cross talk prevention algorithm, the PR-M/F Series eliminates the need to install additional shielding from other light sources. To further improve stability, an automatic power control function has been included to increase/reduce the light intensity of the sensor. Paired with its higher operating frequency and cross talk avoidance functions, this first in industry feature greatly reduces the effect of the target's color or angle to create the most reliable detection ability in its class.

Light frequency comparison Automatic power control function

On a dark workpiece[Increased light emission]

On a bright workpiece [Reduced light emission]

1.2 m 3.94'Thrubeam typeMaximum Detecting Distance

Background suppression typeMaximum detecting distance

7

Simple installation and No sensitivity adjustment required

EASE OF USEThe PR-M/F was created with ease of use in mind from installation to operation. No special hardware is required as standard M3 screws are used for mounting. All models* feature both Light-on and Dark-on outputs, eliminating the need to maintain multiple part numbers. Once integrated, no sensitivity adjustment is required. Operation is instantly possible and easily monitored with the sensors highly visible indicators. *Excludes M8 3pin connector type

Highly visible indicators M8 connector types available Install with standard M3 screws. No special hardware required.

Highly visibleindicators

M3 screw installation

8

The compact body enables easy installation even in a very narrow space.

No sensitivity adjustment is required, which allows for quick and simple installation while maintaining completely reliable detection.

The profile of the sensor is greatly reduced, decreasing the potential for interference with the loading process while the stainless steel body resists damage when impact does occur.

Presence/absence of handfed parts was detected with conventional photoelectric sensors, which interfered with the loading process and resulted in damage.

Versatile for use in a wide variety of applications and industries

Bowl feeders Electronics

Presence/absence confirmation of connectors during parts feeding

Detecting improper seating of IC chips

Presence/absence detection of handfed parts

AfterBefore

Improvement application

9

The sensitivity is automatically adjusted according to the light intensity received by the sensor, which reduces the effects of the angle and color of the target, and results in stable operation.

The background suppression function reduces the effects of ambient light, which results in stable detection in all conditions.

Reduced by 81% in size*, the PR-M/F can be installed in extremely narrow spaces. *Compared to conventional models

The equipped background suppression function provides stable detection of components only in the specified operating range, eliminating false detection.

Electronics

Arrival confirmation of electronic PCBs

Solar

Presence/absence confirmation of solar substrates

Packaging

Passing bottle confirmation on side by side conveyors

Automotive

Presence/absence confirmation on instrument panels

10

❚ Lineup

Configuration Type Detecting distance Connection method Cable length Output Model Weight

Thrubeam

Miniature slim type

1.2 m 47.24"

Cable

1 m 3.28' NPN PR-M51N1 Approx. 42 g

3 m 9.84'NPN PR-M51N3

Approx. 90 gPNP PR-M51P3

M8 4-pin *1

120 mm 4.72" *2

NPN PR-M51CN

Approx. 26 gPNP PR-M51CP

M8 3-pin Light-on *1 PNP PR-M51C3PL

M8 3-pin Dark-on *1 PNP PR-M51C3PD

Flat type

0.6 m 23.62"

Cable

1 m 3.28' NPN PR-F51N1 Approx. 36 g

3 m 9.84'NPN PR-F51N3

Approx. 80 gPNP PR-F51P3

M8 4-pin *1

120 mm 4.72" *2

NPN PR-F51CN

Approx. 20 gPNP PR-F51CP

M8 3-pin Light-on *1 PNP PR-F51C3PL

M8 3-pin Dark-on *1 PNP PR-F51C3PD

Reflective with Background Suppression

Miniature slim type

1 to15 mm 0.04" to 0.59"

Cable

1 m 3.28' NPN PR-MB15N1 Approx. 21 g

3 m 9.84'NPN PR-MB15N3

Approx. 45 gPNP PR-MB15P3

M8 4-pin *1120 mm 4.72" *2

NPN PR-MB15CN

Approx. 13 gPNP PR-MB15CP

M8 3-pin Light-on *1 PNP PR-MB15C3PL

1 to 30 mm 0.04" to 1.18"

Cable

1 m 3.28' NPN PR-MB30N1 Approx. 21 g

3 m 9.84'NPN PR-MB30N3

Approx. 45 gPNP PR-MB30P3

M8 4-pin *1120 mm 4.72" *2

NPN PR-MB30CN

Approx. 13 gPNP PR-MB30CP

M8 3-pin Light-on *1 PNP PR-MB30C3PL

Flat type

1 to 15 mm 0.04" to 0.59"

Cable

1 m 3.28' NPN PR-FB15N1 Approx. 18 g

3 m 9.84'NPN PR-FB15N3

Approx. 40 gPNP PR-FB15P3

M8 4-pin *1120 mm 4.72" *2

NPN PR-FB15CN

Approx. 10 gPNP PR-FB15CP

M8 3-pin Light-on *1 PNP PR-FB15C3PL

1 to 30 mm 0.04" to 1.18"

Cable

1 m 3.28' NPN PR-FB30N1 Approx. 18 g

3 m 9.84'NPN PR-FB30N3

Approx. 40 gPNP PR-FB30P3

M8 4-pin *1120 mm 4.72" *2

NPN PR-FB30CN

Approx. 10 gPNP PR-FB30CP

M8 3-pin Light-on *1 PNP PR-FB30C3PL

*1 Cable is sold separately. *2 Length between the main unit and connector.

10-30 VDC

0 V

Brown/�

Blue/�

White/�

Black/�

Output1

Output2Ove

rcurr

ent

pro

tect

ion c

ircu

it

Sens

or m

ain

circ

uit

Load

Load

10-30 VDC

Sens

or m

ain

circ

uit

Ove

rcurr

ent

pro

tect

ion c

ircu

it

0 V

Load

Brown/➀

Blue/➂

White/➁

Black/➃

Output1

Output2

Load

10-30 VDC

Sens

or m

ain

circ

uit

0 V

Brown/➀

Blue/➂

11

❚ Extension Cable

NPN type : Reflective & Thrubeam receiver Thrubeam transmitterPNP type : Reflective & Thrubeam receiver

Specifications Material Appearance Connection method Length Model Weight

Standard

Cable: PVCConnector: Brass nickel plating M8 4-pin

2 m 6.56' OP-73864 55 g

10 m 32.81' OP-73865 220 g

Cable: PVCConnector: Zinc nickel plating M8 3-pin 2 m 6.56' OP-87627 80 g

Chemical resistant

Cable: PVCConnector: SUS316L

M8 4-pin 2 m 6.56' OP-87621 75 g

M8 3-pin 2 m 6.56' OP-87622 60 g

Straight type

❚ I/O circuit diagram

❚ Enclosure ratings

Enclosure ratingConector type

Cable typew/ standard extension cable w/ chemical resistant extension cable

IP67IEC60529

✓ ✓ ✓

IP69KDIN40050-9

– – ✓

ECOLAB,Diversey

– ✓* ✓*

M8 Connector pin layout (3-pin type) 1 3

4

M8 Connector pin layout (4-pin type) 12

34

* Have passed resistance tests with cleaning agents from multiple manufactures.

Screw length

12

Type Model Material/Weight

Flat type standard mounting bracket(M3 screw x 2 supplied)Qty: 1

PR-B01SUS316L

Approx. 8 g

Flat type rear mounting bracket(M3 screw x 2 supplied)Qty: 1

PR-B02SUS316L

Approx. 10 g

Miniature slim type standard mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1

PR-B03SUS316L

Approx. 8 g

Miniature slim type rear mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1

PR-B04

SUS316LApprox. 10 g

Miniature slim type side mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1

PR-B05

❚ Mounting bracket

Type Model Material/Weight

Adjustable bracket for the miniature slim type(M3 screw x 2 supplied) OP-87404 Zinc nickel plating

Approx. 95 g

Locking screw for adjustable bracket

Screw length:45 mm 1.77" OP-87406 Iron nickel plating

Approx. 70 g

Screw length: 65 mm 2.56" OP-87407 Iron nickel plating

Approx. 80 g

Adjustable mount for the flat type mounting bracket OP-87664 Zinc nickel plating and others

Approx. 190 g

Mounting bracket for the flat type(M3 screw x 4, plate nut x 1 for the compact slim/flat types supplied)

200 mm 7.87" OP-87665 SUS304Approx. 77 g

130 mm 5.12" OP-87666 SUS304Approx. 50 g

❚ Mounting bracket (adjustable bracket)

❚ AccessoryType Model Material/Weight

Plate nut (for the flat type) Qty: 2(M3 screw x 4 supplied)

OP-87667SUS316L

Approx. 1 g

Plate nut (for the miniature slim type) Qty: 2(M3 screw x 4 supplied)

OP-87668SUS316L

Approx. 2 g

Spacer (for the flat type) Qty: 2 x 2(M3 screw x 4 supplied)

OP-87669SUS303

Approx. 1 g

Slit, ø0.5 (for the flat type) Qty: 1Detecting distance: 30 mm 1.18" *

OP-87670

SUS304Approx. 1 g

Slit, 0.5 x 3 (for the flat type) Qty: 1Detecting distance: 120 mm 4.72" *

OP-87671

Slit, ø0.5 (for the miniature slim type) Qty: 1Detecting distance: 30 mm 1.18" *

OP-87672

Slit, 0.5 x 3 (for the miniature slim type) Qty: 1Detecting distance: 180 mm 7.09" *

OP-87673

OP-87406+87664+87666

OP-87404+87406+87668

* Dedicated to the thrubeam type. The detecting distance is when attached to both the transmitter and receiver.

13

Appearance Miniature slim Flat

Type Thrubeam Reflective with Background Suppression Thrubeam Reflective with Background Suppression

Model

NPN output

Cable (1 m 3.28') PR-M51N1 PR-MB15N1 PR-MB30N1 PR-F51N1 PR-FB15N1 PR-FB30N1

Cable (3 m 9.84') PR-M51N3 PR-MB15N3 PR-MB30N3 PR-F51N3 PR-FB15N3 PR-FB30N3

M8 connector 4-pin PR-M51CN PR-MB15CN PR-MB30CN PR-F51CN PR-FB15CN PR-FB30CN

M8 connector 3-pin -

PNP output

Cable (1 m 3.28') -

Cable (3 m 9.84') PR-M51P3 PR-MB15P3 PR-MB30P3 PR-F51P3 PR-FB15P3 PR-FB30P3

M8 connector 4-pin PR-M51CP PR-MB15CP PR-MB30CP PR-F51CP PR-FB15CP PR-FB30CP

M8 connector 3-pin*1 PR-M51C3PDPR-M51C3PL

PR-MB15C3PL PR-MB30C3PLPR-F51C3PDPR-F51C3PL

PR-FB15C3PL PR-FB30C3PL

Detectable distance 1.2 m 3.94' 1 to 15 mm0.04" to 0.59"

1 to 30 mm0.04" to 1.18" 0.6 m 1.97' 1 to 15 mm

0.04" to 0.59"1 to 30 mm

0.04" to 1.18"Max. distance at which the sensor turns OFF(white paper*2) - 20 mm 0.79" 43 mm 1.69" - 20 mm 0.79" 47 mm 1.85"

No. of control outputs*1 2 : 1 Light-ON, 1 Dark-ON

Output operation*1Output 1 Dark-ON Light-ON Dark-ON Light-ON

Output 2 Light-ON Dark-ON Light-ON Dark-ON

Response time*1Output 1 ON -> OFF: 0.5 ms, OFF -> ON: 0.5 ms

Output 2 ON -> OFF: 2.7 ms, OFF -> ON: 0.5 ms

Sensitivity adjustment None

Spot diameter - Approx. ø3 mm ø0.12" (at 15 mm 0.59")

Approx. ø5.5 mm ø0.22" (at 30 mm 0.18") -

Approx. 2.5 x 4.5 mm 0.10" x 0.18"

(at 15 mm 0.59")

Approx. ø5 mm 0.20" (at 30 mm 0.18")

Light source 4 element, Red LED (650 nm)

Mutual interference prevention - 4 units - 4 units

Indicator Output indicator (orange), Stable operation indicator (green), Thrubeam transmitter: power indicator (green)

Power voltage 10 to 30 VDC, including 10% ripple (P-P)

Power consumption Transmitter: 11 mAReceiver: 16 mA 19 mA Transmitter: 11 mA

Receiver: 16 mA 19 mA

Control output

NPN output type: NPN open collector, PNP output type: PNP open collector30 VDC or less, 50 mA or less

Residual voltage: 1.0 V or less at 10 mA or less, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mALeakage current: 0.3 mA or less at 3 kΩ of load resistance, 0.5 mA or less at 1 kΩ of load resistance, 1.5 mA or less at 0.2 kΩ of load resistance

Protection circuit Protection against reverse power connection, output overcurrent, power supply surge, output surge

Environmental resistance

Enclosure rating IP67 (IEC60529), IP69K (DIN40050-9)*3, 4X, 6P, 13 (NEMA250)

Ambient light Incandescent lamp: 5000 lux or less, Sunlight: 20000 lux or less

Ambient temperature -25 to +55°C -13°F to +131°F (No freezing)

Storage temperature -25 to +75°C -13°F to +167°F

Ambient humidity 35 to 85% RH (No condensation)

Shock resistance 1000 m/s2 in X, Y, Z axis directions respectively 6 times

Vibration resistance 10 to 55 Hz, 1.5 mm 0.06" double amplitude in the X, Y, and Z directions, 2 hours respectively

Insulating resistance 20 MΩ or more (500 VDC)

Withstand voltage 1000 VAC, 50/60 Hz, 1 min

MaterialCase: SUS316L, Indicator cover/Lens cover: Polysulfone, Cable: PVC, Cable protection: PMP, Filler: Polyester resin,

Connector (connector type only): Brass nickel plating/Polyester elastomer

Weight

1 m 3.28' cable Approx. 42 g Approx. 21 g Approx. 36 g Approx. 18 g

3 m 9.84' cable Approx. 90 g Approx. 45 g Approx. 80 g Approx. 40 g

M8 connector Approx. 26 g Approx. 13 g Approx. 20 g Approx. 10 g

Accompanying items Instruction Manual

❚ Specifications

*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.*2 Typical value.*3 Cable type only.

ø0.13ø3.2

Transmitting point/Receiving point

ø2.6 ø0.10",(Transmitter) 2 cores (brown/blue),(Receiver) 4 cores (brown/blue/black/white): 0.08 mm2

Cable length:1 m 3.28'(PR-F51N1), 3 m ø9.84'(PR-F51*3)

Indicator

0.32"8

1.06"27

0.26"6.5

0.87"22

0.50"12.7

R3 R0.12"

0.18"4.5

0.06"1.5

0.09"2.3

0.55"14

Indicator

Receiving point

Transmitting point

0.18"4.5

0.06"1.5

2.3 0.09"

ø0.10"ø2.6

1.06"27

0.22"5.5

0.39"10

0.87"22

0.26"6.5

5.79"(147)

1.03"(26.2)

ø0.35"(ø9)

0.32"8

0.55"14ø0.13

ø3.2

R3 R0.12"

Indicator

ø0.10"ø2.6

Transmitting point/Receiving point

1.06"27 0.50"

12.7

0.87"22

0.26"6.5

5.79"(147)

1.03"(26.2)

ø0.35"(ø9)

0.32"8

0.55"14

0.18"4.5

0.06"1.5

2.3 0.09"

ø0.13ø3.2

R3 R0.12"

0.22"5.5

0.39"10

Indicator

Cable length:1 m 3.28'(PR-F*1), 3 m ø9.84'(PR-F*3)

Transmitting point

Receiving point

ø2.6 ø0.10",4 cores (brown/blue/black/white):0.08 mm2

0.18"4.5

0.06"1.5

0.09"2.3

1.06"27

0.87"22

0.26"6.5

0.55"14

0.32"8

ø0.13ø3.2

R3 R0.12"

10 0.39"Transmitting point/Receiving point

Indicator

1.06"26.9

0.30"7.5

0.51"13

0.23"5.9

5.87"(149)

1.03"(26.2)

ø0.28"ø7.1

ø0.10"ø2.6

ø0.35"(ø9)

0.32"8.2

0.59"15

4.2 0.17"

0.01"0.3

0.30"7.5

0.08"× ø0.13"

2×ø3.2 Indicator

Receiving point

Transmitting point

1.06"26.9

0.23"5.9

5.87"(149)

1.03"(26.2)

ø0.28"ø7.1

ø0.10"ø2.6

ø0.35"(ø9)

10 0.39"

0.51"13

0.32"8.2

0.17"4.2

0.22"5.5

0.59"15

4.2 0.17"0.08"× ø0.13"

2×ø3.20.01"

0.3

0.30"7.5

0.08"× ø0.13"

2×ø3.2Transmitting point/Receiving point Indicator

ø2.6 ø0.10",(Transmitter) 2 cores (brown/blue),(Receiver) 4 cores(brown/blue/black/white): 0.08 mm2

Cable length:1 m 3.28'(PR-M*1), 3 m ø9.84'(PR-M*3)

7.5 0.30"10 0.39"

1.06"26.9

0.23"5.9

0.51"13

0.32"8.2

ø0.28"ø7.1

0.01"0.3

0.30"7.5

4.2 0.17"

15 0.59"

Indicator

ø2.6 ø0.10",4 cores (brown/blue/black/white):0.08 mm2

Cable length:1 m 3.28'(PR-M*1), 3 m ø9.84'(PR-M*3)

Receiving point

Transmitting point

7.5 0.30"0.08"× ø0.13"

2×ø3.2

1.06"26.9

0.23"5.9

0.51"13

0.32"8.2

ø0.28"ø7.1

0.01"0.3

4.2 0.17"

15 0.59"

10 0.39"

0.17"4.25.5

0.22"

14

PR-F51N1/F51N3/F51P3

PR-F51CN/F51CP/ F51C3PL/F51C3PD

PR-M51CN/M51CP/M51C3PL/M51C3PD

PR-FB15CN/FB15CP/FB30CN/FB30CP/ FB15C3PL/FB30C3PL

PR-MB15CN/MB15CP/MB30CN/ MB30CP/MB15C3PL/MB30C3PL

PR-FB15N1/FB30N1FB15N3/FB15P3/FB30N3/FB30P3

PR-M51N1/M51N3/M51P3

PR-MB15N1/MB30N1/MB15N3/MB15P3/MB30N3/MB30P3

ø0.5 ø0.01"

Material: SUS304t = 0.2 0.01"

0.50"12.8

0.17"4.2

0.32"8

0.87"22.2

0.48"12.3

14.6 0.57"

4 0.16"

0.20"5

0.20"5.1


0.17"4.2

0.20"5.1

14.6 0.57"4 0.16"

0.50"12.8

0.32"8

22.2 0.87"

0.48"12.30.20"5

0.12"30.02"0.5


13.2 0.52"

10.2 0.40"

8.7 0.34"0.31"7.9

0.30"7.5

0.43"11

0.59"15

0.83"21

ø0.01"ø0.5


13.2 0.52"

0.5 0.02"

10.2 0.40"

8.7 0.34"

0.30"7.5

0.12"3

0.43"11

0.59"15

0.83"21

0.31"7.9

20 0.79"

1.5 0.06"

11 0.43"12 0.47"

0.45"11.5

Material: SUS316LSupplied accessory: Screw x 2 (M3, 14 mm 0.55", stainless steel),Plate nut (SUS316L)

0.06"1.5

0.13"3.2

0.13"3.2

0.13"3.2

0.16"4

0.13"3.20.14"

3.5

0.98"25

0.16"4

0.16"4

0.22"5.5

0.22"5.5

0.33"8.5

0.59"15

ø5.5

ø0.22

"ø3.2 ø0.13"

Material: SUS303Supplied accessory: Screw x 4(M3, 10 mm 0.39", stainless steel)

0.14"3.5

17 0.67" 10 0.39"

Material: SUS316LSupplied accessory: Screw x 2(M3, 6 mm 0.24", stainless steel)

4×M3,P=0.50.02"

0.06"1.5

0.32"8 0.13"

3.2

0.18"30

0.59"15

0.13"3.2

0.20"5

0.06"1.5

0.63"160.35"

90.24"

6

1.5 0.06"


4×M3,P=0.50.02"

0.18"30

0.59"15

0.32"8

0.32"8

0.53"13.5

0.13"3.2

0.13"3.2

0.20"5

1.00"25.5

0.26"(6.5)

0.63"16

0.06"1.5

0.20"5 0.63"

16

16 0.63"


1 0.04"

3.2 0.13"

2 0.08"

0.06"1.5

1.57"40

0.69"17.5

0.26"6.5

0.16"4

0.32"8

0.28"7

0.08"2

0.13"3.2

0.59"15

0.13"3.2

0.13"3.2

0.69"17.5

1.5 0.06"


0.22"5.5

0.45"11.5

0.43"11

0.13"3.2

3.2 0.13"

0.45"11.5 0.06"

1.5

0.33"8.5

0.16"4

0.16"4

4 0.16"3.5 0.14"

0.13"3.2

0.59"15

0.98"25

0.22"5.5

0.13"3.2

26.5 1.04"17 0.67"


2×M3,P=0.5 0.02"

0.55"14

0.32"8

1.5 0.06"6 0.24"

2×M3,P=0.5 0.02"


0.83"21

0.59"15

1.5 0.06"6 0.24"

15

OP-87672 OP-87673OP-87671OP-87670

PR-B01 PR-B02 PR-B03 PR-B04 PR-B05

OP-87669OP-87667 OP-87668

Unit: mm inch

36.819.5 0.77"

Zinc die-cast

8.3

50.20"

35.9

Nut (M5, iron nickel plating)

spot facing ø20, ø24

SUS430

3.217.4ø27 ø22

ø12

1525.4R0.53"

124

21.5 0.85"

4 × ø3.5 0.16" × ø0.14"

d=3 0.12"

35 1.38"

ø12

Hexagon socket head cap screw

(M5, length 15 mm 0.59", across flats 4 mm 0.16", iron nickel plating)

8.3

12.54.33.3

0.33"

0.49"

0.13"

0.17"

ø0.47"ø0.79" ø0.94"

1.00" 0.59" 1.41"

R13.5

0.47"0.16"

ø0.47"

ø1.06" 0.69"

1.45"

0.13"

ø0.87"

0.33"

L=45 mm 1.77" : OP-87406L=65 mm 2.56" : OP-87407

10 L

（32）

M10×P1.5

Across flats17 0.67",thickness 8 0.32"

Iron nickel plating

ø16

2 x ø21 0.08" x ø0.83", thickness 2 0.08"

ø0.63"

0.39"

(1.26")

19.50.77"

12.50.49"

180.71"

0.33"8.3

0.20"5

0.59"15

1.00"25.4

1.41"35.9

13.50.53"

120.47"16

0.63"

21.50.85"

4 × ø3.5 0.16" × ø0.14"

L

L=50mm 1.97" : OP-87406L=70mm 2.76": OP-87407

1.05"26.7

47.5 1.87"54.5

35 1.38"

19.512.5

ø0.47"ø12

ø0.47"ø12

Hexagon socket head cap screw

(M5, length 15 mm 0.59", across flats 4 mm 0.16", iron nickel plating)

Nut (M5, iron nickel plating)

Brass nickel plating

Zinc die-cast

ø1.06"ø27

0.77" 2.15"

0.49"

0.11"(3)

2×ø3.5ø0

.14"

L

0.96"24.5 1

L=200mm 7.87" : OP-87665L=130mm 5.12" : OP-87666Material: SUS304Supplied accessory: Screw x 4 (M3, stainless steel), Plate nut x 2 (SUS316L)

ø0.47"

ø12

ø0.35

"

ø9

0.67"17

0.20"5

0.20"5

0.14"3.5

3.5 0.14"8 0.32"

1.00"25.4

2 0.08"

2.76"(70)

0.59"15

16

OP-87404

OP-87665/87666OP-87664

OP-87406/87407

OP-87406 (87407) + OP-87404

ø9.56.7

ø9

1.05"

2000 (OP-73864)/10000 (OP-73865)

ø3.7 (4×0.28 mm2)

ø0.35"

ø0.37"

ø0.15"

78.74" 393.7"0.26"

26.7

ø0.19" ø4.7(4x0.25mm2)

0.39"10

1.26"32

78.74"2000

ø0.19"ø4.4(3x0.25mm2)

0.39"10

1.26"32

78.74"2000

1.33"33.7M8

ø10ø0.39"

78.74"2000

ø0.17"ø4.4 (3x0.25mm2)

17

CAD DATA DOWNLOAD

www.keyence.com/CADG

OP-73864 / 73865

OP-87627

OP-87621 OP-87622

Unit: mm inch

M8 Connector pin layout (3-pin type)

13

4

M8 Connector pin layout (4-pin type)

No. Color

➀ Brown

➁ White

➂ Blue

➃ Black34

12

18

Optical axis adjustment issimple with the built-in alignment indicator

Laser marked tags eliminate possible contamination caused by deteriorating paint or sticker type labels

High power, self contained photoelectric sensors

One-touch mounting bracket simplifies installation

PZ-G Series LED

SELF-CONTAINED PHOTOELECTRIC SENSOR

Detecting distance

High-Power Dual LED-typeHigh-power thrubeam typePZ-G52

4-element red LED-type

Related Products

20 m 65.6'Thrubeam typePZ-G51 1 m 3.3'

Reflective type PZ-G41

Retro-reflective type PZ-G61 1 m 3.3'40 m 131.2'

19

Best Detection Ability in its class with CMOS laser stability

One-touch setup and Digital display simplify operation

All-Purpose Laser Photoeye

High enclosure rating and Stainless steel body (SUS316L)ensure durability and long life

LR-Z Series CMOS Laser

SELF-CONTAINED CMOS LASER SENSOR

Detecting distance

Short-range type

35 to 100 mm 1.38 to 3.94'' 35 to 250 mm 1.38 to 9.84''LR-ZB100

Long-range type

LR-ZB250

Related Products

KA210-1053

Copyright (c) 2012 KEYENCE CORPORATION. All rights reserved. PR-KA-C-US 1093-3 611684 Printed in Japan

KEYENCE CORPORATION OF AMERICASales & Marketing Head Office 1100 North Arlington Heights Road, Suite 210, Itasca, IL 60143 PHONE: 888-539-3623 FAX: 855-539-0123

SAFETY INFORMATIONPlease read the instruction manual carefully in order to safely operate any KEYENCE product.

The information in this publication is based on KEYENCE’s internal research/evaluation at the time of release and is subject to change without notice.

1 - 8 8 8 - 5 3 9 - 3 6 2 31-888-KEYENCE

CALL TOLL FREE

T O C O N TA C T Y O U R L O C A L O F F I C E www.keyence.comE-mail : [email protected]

LR-ZSERIES

Self-containedCMOS Laser Sensor

PR-M/FSERIES

Self-contained Miniature Photoelectric Sensor

new standard! metal mini-photoeye

Documents