new services in testing energy efficiency - sirim · pdf filenew services in testing energy...
TRANSCRIPT
New Services in Testing
ENERGY EFFICIENCY
17th OCT 2012
Prepared & presented by;
M.Zamri Mustaffa
Head of Section,
Electrical & Electronic Section,
SIRIM QAS International Sdn.Bhd.
Presentation Outline
1. Existing Testing Services
2. Effort to Serve Client Better
3. New services on Energy Efficiency Product Testing
a) Updates on Energy Efficiency (product) requirement
in Malaysia
b) Updates on - SIRIM QAS International new Energy
Efficiency test lab
c) EE Test facilities-what we have now
d) EE test facilities -what will be available
4. Future development
Presentation Outline
ELECTRICAL & ELECTRONIC SECTION
Electrical & Electronic Section (EEST)
was set up to serve the need of consumer and industry (including local manufacturers and importers) by providing testing facilities and services to verify the safety and performance of electrical and electronics products.
It is an independent third party and the biggest testing laboratory that provide electrotechnical compliance testing in Malaysia.
Testing Services – Scope (what we can cover..)
Scope of Testing
Performance
and
energy efficiency test
Compliance test
for regulatory requirement
Test for ST - Failure investigation & fatality case
-Enforcement purposes
Test for
Quality & Development Test for
Market surveillance -ST
-SIRIM Product Certification Scheme
Testing Services-Purpose
EEST testing services are for the purpose of;
Product safety and regulatory requirement
• Product evaluation of safety for consumer protection.
• Product conformity to national and international standards.
• Product under certification schemes.
• Product under Market Surveillance
• Product for pre-shipment
Product performance & efficiency
• Product performance
• Product for energy efficiency and energy labeling/star rating
Product quality and development
• Product for quality checks for purchasing or tender.
• Product for development (R&D) and quality control in manufacturing.
Product failure investigation
• Product under failure investigation
EEST-Types of Products
EE products
Medical Equipment
& Lab equipment
Cable
-LV
-Medium
IT
Equipment
AV & Electronic
Plug
&
socket outlet
Lighting
&
Accessories
Switchgear
&
Control gear -ELCB
-MCB
-RCCB
Domestic Household
We can issue any type of test report for specific test application
TEST REPORT
ASEAN EEEMRA
ST STAR labeling program
ST approval -COA
IEC EE CB scheme
Other countries’
STAR labeling
requirement
•We have issued
a few EE test reports
for Hong Kong
ACCREDITED UNDER
SAMM SCHEME BY THE
DEPARTMENT OF
STANDARDS MALAYSIA
(STANDARDS MALAYSIA)
SINCE NOV 1995
CREDENTIALS
MS ISO/IEC 17025 TESTING
SAMM NO. 086 – EEST HQ
SAMM NO.377 – EE-Penang
ILAC Laboratory
Combined MRA mark
ACCREDITED AS A CBTL UNDER THE IECEE
CB SCHEME SINCE 2002
As one of designated /listed test lab under ASEAN
EEMRA for ASEAN Countries since April 2005
Power tools test equipment
TEST ACTIVITIES AND FACILITIES
Rice cooker test
Instantaneous water heater test
High voltage test on fan
TEST ACTIVITIES AND FACILITIES
Lid Endurance test for washing machine
Iron drop test Endurance test for
Cordless jug kettle
1) Staff: EEST have increased our manpower by recruiting new staff
-Technician : 20
-Test Executives: 10
Current total manpower: 82 (including with it 23 Test Executives)
2) Equipment
i) equipment automation
ii) duplicate existing equipment
iii) procure more equipment
In all, we have spent (2009-2012) more than RM 3M
Energy Efficiency test equipment in Sect 16
3) Expansion of test lab
EEST has expanded lab’ space area.
We are now occupied Building 11,12,16 & 9 ( all in HQ) and EE lab in Sect 16
4) Formation of CSG (Customer Service Group)
5) Continue to improve on internal process ( test process flow)
6) ICT ( e-CEE) for consignment application
And we will continue to improve our services……
What have we done to improve our services
(for the last 2-3 years)
1) KeTTHA is in the process of developing an EE law.
‘Drafting Working Group (DWG)’ for Energy Efficiency & Conservation Law
was formed by KeTTHA. The last meeting was in March 2012
2) New revised criteria for ST STAR labeling program
ST has recently circulated a new criteria for it’s STAR labeling program.
ST has also proposed MEPS for products under their labeling program;
For most products MEPS is proposed at 2 STAR
ST/IP/CT/11/09 (iv) (76) – dated: 8th June 2012
This MEPS will take effect in tandem with approval for Regulation 101A,
Electric Regulation 1994 (Amendment 2012)
3) In future, new EE standard for refrigerator test – IEC 62552 (2nd edition)
1. Updates on Energy Efficiency product
requirement in Malaysia
1) Since the appointment by PEMANDU in January 2011, SIRIM QAS
International has taken extensive steps to ensure the timely
establishment of its Energy Efficiency testing laboratory facilities.
2) SIRIM Berhad (SIRIM QAS International’s parent company) has
purchased two factory lots in Section 16, Shah Alam to develop the
laboratory.
3) The facilities will be a complete and comprehensive testing
infrastructure using latest technology, addressing latest standard
requirements and industry needs.
2. Updates on SIRIM QAS International new Energy
Efficiency test lab
4) With the facilities, SIRIM QAS International will be able to provide
competent and reputable testing services to support the Energy
Efficiency program while providing local industries with an
infrastructure that will facilitate them in enhancing their product in term
of energy efficiency.
5) Finally, the testing infrastructure will also facilitate the implementation
of
a) ST Energy Efficiency and STAR Labeling Program,
b) SEDA (Sustainable Energy Development Authority’s)
SAVE program
c) MEPS, and
d) EE law (KeTTHA)
New Energy Efficiency Test facilities
1) The Energy Efficiency test laboratory was officially launched by Energy, Green
Technology and Water (KeTTHA) Minister Datuk Seri Peter Chin on 15th May
2012
2) This is the first Energy Efficiency testing laboratory in Malaysia. It is located in
Section 16, Shah Alam.
3) With this launching, the EE testing laboratory adds to the existing range of
SIRIM QAS International energy efficiency testing capabilities currently
offered by existing laboratories in our HQ in Section 2, Shah Alam.
4) Today the laboratory is ready to accept applications for energy efficiency
testing for product such as refrigerators, lamp (and lighting devices),
domestic fans, televisions and ballast for fluorescent lamps
The available test facilities in our new Energy Efficiency Lab are
as followed;
Phase 1
1) Integrating sphere – for light output/lumen measurement
2) Environmental Chamber – for refrigerator testing
(can test up to 6 units at any given time)
3) Balanced type calorimeter – for air conditioner test
4) Photobiological hazard equipment – for LED/light
5) Equipment for TV energy efficiency test
6) Air delivery system for ceiling fan & other fan
7) Ballast-watt loss measurement
3. Test Facilities: What we have now;
4. Test Facilities: What will be available
Phase 2 (most of the equipment will be ready by 2013)
1) Goniophotometer – for light output measurement
(waiting for equipment delivery)
2) Cyclic chamber – for endurance treatment
3) Psychometric chamber – for air conditioner test
4) Air delivery test system– for fan test ( a duplication of existing facilities)
REFRIGERATOR - TEST FACILITIES
AVAILABLE TEST EQUIPMENT
1) Humidity chamber
2) Power meter
3) Temperature recorder
4) Special test load
5) Software (DAQ Logger)
ELECTRIC FAN - TEST FACILITIES
AVAILABLE TEST EQUIPMENT
Air delivery test system ;consists of
-Anemometer
-Power meter
-Controller
-Data acquisition system
-PC – to monitor results
-Power supply system
TV - TEST FACILITIES
AVAILABLE TEST EQUIPMENT
1) Standard signal (in a CD)
2) Signal generator
3) Watt-hour meter
(with averaging function)
4) Luminance meter
5) etc…..
TEST FACILITIES – Integrating Sphere
Integrating Sphere - general
purpose: to measure light
characteristic for all kind of light
sources.
This is required under the Energy
Efficiency program by Suruhanjaya
Tenaga (ST)
Integrating Sphere complete with set
of measuring equipment and
software shall be used for measuring
Lumen Maintenance of light sources
of lamp such as LED lamp,
fluorescent lamp, SSL lamp, halogen
lamp, HID lamp ect.
Characteristic of light (2π & 4 π )to
be measured include
-the luminous flux,
-Colour rendering index (CRI),
-Color correlative temperature (CCT)
-xy coordinates, and
-spectral power distribution for the
lamp
TEST FACILITIES – Photobiological Hazards – will be available by end of 2012
The purpose of equipment is;
-to measure and to check the
safety optical radiation for
eyes protection &
- to classify the performance
requirements of non-laser
product, direct ocular
exposures and hazard
distance as part of energy
performance for labeling of
LED/SSL lighting product.
TEST FACILITIES –Goniophotometer
– will be available by end of 2012
Goniophotometer set equipment and software
shall be used for Electrical and Photometric
measurements of Lighting products for light
distribution especially for various type of
luminaires such as Indoor lighting, street
lighting, flood lighting, etc.
This tests performance to determine the light
output ratio, the light distribution pattern and
photometric coordinates, luminous flux of
luminaire, intensity distribution, zonal lumen
summaries and others relevant as required for
light performance.
Product of luminaire including the street
lighting, office lighting, industrial lighting –
downlight, emergency light, flood light, tunnel
light, pool light, traffic control signal heads and
etc
TEST FACILITIES – Air conditioner -2012
Test facilities for product Timeline – Equipment ready by
3) Air conditioner
a) Balanced ambient room-type calorimeter system Testing method of the cooling and heating capacity: Room
calorimeter method . It provides the testing with indoor and
outdoor compartments as well as indoor and outdoor side
controlled-temperature airspace which can make sure of
thermal equilibrium delivery
b) Psychometric calorimeter
(Testing method of the cooling and heating
capacity: Indoor air- enthalpy method)
Test & full commissioning by October
2012
We may further develop a few more test facilities to cater for
Energy Efficiency Test requirement for other products such as;
- Vacuum cleaner,
- Washing machine
- Water heater (instantaneous/storage).
- Rice cooker
SIRIM QAS International will gradually increase capabilities for testing of
other appliances in the future in tandem with;
1) ST Electrical Appliances Energy Efficiency and Labeling Program
2) Sustainable Energy Development Authority’s (SEDA) SAVE program
3) EE Law & MEPS
Test Facilities: SIRIM Commitment
ENQUIRIES FOR ENERGY EFFICIENCY TESTS,
PLEASE CONTACT US
Mohd Fairuz Zainordin
Tel : 03-55446257 (Direct) , 03-55446253 (Office)
Fax: 03-55446272
Email: [email protected]
Anita Marzuki
Tel : 03-55446158(Direct), 03-55446253 (Office) Fax:
03-55446272
Email: [email protected]
Mohd Azmeer Ahmad
Tel : 03-55446263(Direct), 03-55446253 (Office)
Fax: 03-55446272
Email: [email protected]
Muhammad Iskandar
Tel : 03-55445135 / 5185 / 6271(Direct), 03-55446253 (Office)
Fax: 03-55446272
Email: [email protected]
For Refrigerators and
Air Conditioners
For TVs (LCD, Plasma, CRT, LED)
For Fans (all types)
For Lamps/lightings
Sharifah Jusoh (Customer Service Group)
Tel : 03-55446266(Direct), 03-55446253 (Office)
Fax: 03-55446272
Email: [email protected]
For General Enquiries