new product presentation - data acquisition, data communication, plcs, automation and control...

New Product Presentation

Maria Lemone, Sales ManagerICP DAS USA, Inc.

[email protected] x105www.icpdas-usa.com

Making Data Acquisition Simple

New Product Presentation for Wes Moore

mailto:[email protected]

DGW-521 DALI Lighting Control Gateways

Features:• Conversion between RS-485/RS-232/USB and DALI

Interfaces• Easy Deployment: The ID Code can be written by the

RS-485 Interface• Built-in DALI Power can be enabled or disabled with

a Switch• 1500 VDC Isolation• ±4 ESD Protection for the RS-232/485/USB Data Line• ±4 kV EFT Protection and ±2 kV Surge Protection for

Power Line• DIN-Rail Mountable• Wide Operating Temperature Range: -25 °C ~ +75 °C



DGW-521 Application



Communication Distances:• DALI:• RS-232:• USB:

ET-7200 Dual Port Ethernet I/OFeatures:• Built-in Web Server• Web HMI• Support for both Modbus TCP and Modbus UDP Protocols• Communication Security• 2-port Ethernet Switch for Daisy-Chain Topology• Dual Watchdog• Wide Operating Temperature Range: -25 ~ +75°C• I/O Pair Connection• Built-in I/O



ET-7200 SeriesET-7202 Ethernet I/O Module with 2-port Ethernet Switch, with 3-ch Analog Input, 6-ch Digital Input, 3-ch Relay, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C

ET-7215 Ethernet I/O Module with 7-ch RTD Inputs, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C

ET-7217 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output

ET-7217-10 Ethernet I/O Module with 2-port Ethernet Switch, with 10/20-ch Analog Input

ET-7226 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output

ET-7242 Ethernet I/O Module with 2-port Ethernet Switch, with 6-ch Analog Input, 2-ch Analog Output, 2-ch Digital Input, 2-ch Digital Output

ET-7251 Ethernet I/O Module with 2 Ethernet Switch Ports, with 16-ch Digital Input

ET-7252 Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch Digital Input, 8-ch Digital Output

ET-7253 Ethernet I/O Module with 2-port Ethernet Switch, with 16-ch Digital Input

ET-7255 Ethernet I/O Module with 8-ch Digital Input, 8-ch Digital Output

ET-7260 Ethernet I/O Module with 2 Ethernet Switch Ports, with 6-ch Relay Output and 6-ch Digital Input

ET-7267 Ethernet I/O Module with 8-ch Relay



WF-2000 Wi-Fi I/O ModulesFeatures:• Support sink type digital outputs• Support sink / source type digital inputs• Compatible with IEEE 802.11b/g standards• Support infrastructure and ad hoc modes for wireless

networks• Support WEP, WPA and WPA2 wireless encryption• Support Modbus/TCP and UDP protocols• Support pair connection mode• Support DO power on value & safe value mechanism• Built-in Watchdog

Number of nodes that can be in one network:

Communication Protocols: Modbus TCP, UDPCommunication Distance:



Applications


WF-2000 SeriesWF-2017

8-channel Differential/16-channel Single-Ended Analog Input Wi-Fi I/O Module. 4 kV ESD Protection. Built-in Watchdog (RoHS)

WF-2019 10 Channel Universal Analog input

module with thermocouple, voltage and current input types. Communicable over Modbus TCP and Wi-Fi networks. Supports operating temperatures between -25C ~ +75C

WF-2055

Wi-Fi I/O Module with 8-channel Isolated Digital Input and 8-channel Sink Type Isolated Digital Output, communicable over Modbus TCP, has a DIN-rail mount, supports operating temperatures from -25C ~ +75C

WF-2060

Wi-Fi I/O Module with 6-channel Isolated Digital Input and 6-channel Relay Output. Supports Modbus TCP protocol and operating temperatures from -25 ~ +75 ℃ ℃


WF-2000 Series

EIP-2000 Ethernet/IP I/O ModulesFeatures:• Transfer protocol: EtherNet/IP• Powerful 32-bit MCU handles efficient network

traffic• 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-

negotiating, auto MDI/MDIX, LED Indicators)• Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and

TFTP protocols• Easy firmware update via Ethernet• Removable terminal block connector• LED display to indicate the I/O status• Analog Input• Internal resistors (125Ω) selectable in Differential

mode• RoHS compliant


EIP-2017Number of nodes that can be in one network:

Applications


WF-2000 SeriesEIP-2017

Isolated 8-ch DIFF / 16-ch SE Analog Input EtherNet/IP module

EIP-2019

Isolated 8-ch Thermocouple Analog Input EtherNet/IP module

EIP-2042

Isolated 16 channel DO EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C

EIP-2051

Isolated 16 channel DI EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C

EIP-2055

Isolated 8 channel DI and 8 channel DO EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C

EIP-2060

Isolated 6 channel DI and 6 channel Relay Output EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C


EIP-2000 Series

PM-3000 Power Meters

Features:• True RMS Power Measurements• Energy Analysis for 1P2W, 1P4W• Current Measurements Up to 200 A with Different CT Ratio• Voltage Measurements Up to 300 V• Clip-on CT for Easy Installation• W Accuracy Better than 1% (PF=1)• Supports RS-485, Ethernet or CAN bus/CANopen Interface• Supports Modbus RTU, Modbus TCP or CAN Protocol• Supports 2 Power Relay Output (Form A)• Supports PoE (IEEE 802.3af, Class 1)



PMC-5151 Power Meter ConcentratorsFeatures:• Built-in Web Server: Set up parameters and view data via web browser• View Real-time trend or historical trend• Generate Power Data Reports ( daily report and monthly reports )• Built-in MicroSD card slot for Data Storage• Send Power Meter Data files based on a Schedule via FTP • Send Email & SMS alarm and notification messages ( SMS messages need GSM

Modems like GTM-201-USB to get sent) • Web based HMI Tools for easy HMI development• Modbus TCP/RTU Slave functions allow seamless integration with SCADA

software• PMC Data Server allows importing of power data from database systems• Built-in IF-THEN-ELSE logic engine can be used to turn devices on or off based

on configured power usage • Scheduling function for operations of I/O modules (devices)• Support Modbus I/O modules that enable real-time control and management of the devices



Application



TPD & VPD HMI PLC Features:• A tiny touch screen controller HMI designed for building and home automation. • Equipped with a high resolution TFT color touch screen• Fits in regular electrical wall-mount outlets• Excellent C/P ratio (cost/performance)• High resolution color touch screen• PoE, Power over Ethernet• Free development tool, HMIWorks

Features:• Excellent Cost/Performance ratio• High-resolution color touch screen• RS-485 (including Self-Tuner)• RTC (Real Time Clock)• Speaker• WYSIWYG (What You See Is What You Get) GUI design

TPD-430


TPD-283/U

VPD-130

• 3.5” Touch HMI device• RS-232/RS-485 port• USB port• Real Time Clock and DIN

Rail Mount


HMIWorks Development Software

• WYSIWYG Intuitive Design

• Built-in and Extensible Graphics Library



• C Language and Ladder Diagram Programming

• Wide range of Objects and Tools Shorten Development Time

Applications



GT-540 Device Servers


GT-540

Features:• Automatic/continuous GPRS Link Management• Support Modbus RTU protocol to connect to Max 3

Modbus RTU devices via RS-485 port• Support M2M OPC server for SCADA system• Easy-to-use API tool for users to develop their

applications by various program development tools• Be the GPRS I/O devices• Support data transferring by E-mail• Local I/O linkage function to make the simple local

control• Support 3.7V Li-ion Battery backup• Power supply 10 ~ 30 VDC


GT-540 Application



BNET-5310 Multi-Function BACnet/IP with I/O

Features:• 4 AI channels, 2 AO channel, 3 DI channels and 3 DO

channels.• built-in web server• Protocol: BACnet/IP

Applications:



new product presentation - data acquisition, data communication, plcs, automation and control...

Engineering

ethernet io module

port ethernet switch

ch digital outputet

ch digital inputet

ch analog output

ethernet switch ports

ch analog inputet

channeldo ethernetip