Transcript
Page 1: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

New Product Presentation

Maria Lemone, Sales ManagerICP DAS USA, Inc.

[email protected] x105www.icpdas-usa.com

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 2: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

DGW-521 DALI Lighting Control Gateways

Features:• Conversion between RS-485/RS-232/USB and DALI

Interfaces• Easy Deployment: The ID Code can be written by the

RS-485 Interface• Built-in DALI Power can be enabled or disabled with

a Switch• 1500 VDC Isolation• ±4 ESD Protection for the RS-232/485/USB Data Line• ±4 kV EFT Protection and ±2 kV Surge Protection for

Power Line• DIN-Rail Mountable• Wide Operating Temperature Range: -25 °C ~ +75 °C

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 3: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

DGW-521 Application

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Communication Distances:• DALI:• RS-232:• USB:

Page 4: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

ET-7200 Dual Port Ethernet I/OFeatures:• Built-in Web Server• Web HMI• Support for both Modbus TCP and Modbus UDP Protocols• Communication Security• 2-port Ethernet Switch for Daisy-Chain Topology• Dual Watchdog• Wide Operating Temperature Range: -25 ~ +75°C• I/O Pair Connection• Built-in I/O

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 5: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

ET-7200 SeriesET-7202 Ethernet I/O Module with 2-port Ethernet Switch, with 3-ch Analog Input, 6-ch Digital Input, 3-ch Relay, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C

ET-7215 Ethernet I/O Module with 7-ch RTD Inputs, communicates over Modbus TCP, supports operating temperatures from -25 ~ +75°C

ET-7217 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output

ET-7217-10 Ethernet I/O Module with 2-port Ethernet Switch, with 10/20-ch Analog Input

ET-7226 Ethernet I/O Module with 8-ch Analog Input, 4-ch Digital Output

ET-7242 Ethernet I/O Module with 2-port Ethernet Switch, with 6-ch Analog Input, 2-ch Analog Output, 2-ch Digital Input, 2-ch Digital Output

ET-7251 Ethernet I/O Module with 2 Ethernet Switch Ports, with 16-ch Digital Input

ET-7252 Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch Digital Input, 8-ch Digital Output

ET-7253 Ethernet I/O Module with 2-port Ethernet Switch, with 16-ch Digital Input

ET-7255 Ethernet I/O Module with 8-ch Digital Input, 8-ch Digital Output

ET-7260 Ethernet I/O Module with 2 Ethernet Switch Ports, with 6-ch Relay Output and 6-ch Digital Input

ET-7267 Ethernet I/O Module with 8-ch Relay

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 6: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

WF-2000 Wi-Fi I/O ModulesFeatures:• Support sink type digital outputs• Support sink / source type digital inputs• Compatible with IEEE 802.11b/g standards• Support infrastructure and ad hoc modes for wireless

networks• Support WEP, WPA and WPA2 wireless encryption• Support Modbus/TCP and UDP protocols• Support pair connection mode• Support DO power on value & safe value mechanism• Built-in Watchdog

Number of nodes that can be in one network:

Communication Protocols: Modbus TCP, UDPCommunication Distance:

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 7: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

Applications

Making Data Acquisition Simple

Page 8: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

WF-2000 SeriesWF-2017

8-channel Differential/16-channel Single-Ended Analog Input Wi-Fi I/O Module. 4 kV ESD Protection. Built-in Watchdog (RoHS)

WF-2019 10 Channel Universal Analog input

module with thermocouple, voltage and current input types. Communicable over Modbus TCP and Wi-Fi networks. Supports operating temperatures between -25C ~ +75C

WF-2055

Wi-Fi I/O Module with 8-channel Isolated Digital Input and 8-channel Sink Type Isolated Digital Output, communicable over Modbus TCP, has a DIN-rail mount, supports operating temperatures from -25C ~ +75C

WF-2060

Wi-Fi I/O Module with 6-channel Isolated Digital Input and 6-channel Relay Output. Supports Modbus TCP protocol and operating temperatures from -25 ~ +75 ℃ ℃

Making Data Acquisition Simple

WF-2000 Series

Page 9: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

EIP-2000 Ethernet/IP I/O ModulesFeatures:• Transfer protocol: EtherNet/IP• Powerful 32-bit MCU handles efficient network

traffic• 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-

negotiating, auto MDI/MDIX, LED Indicators)• Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and

TFTP protocols• Easy firmware update via Ethernet• Removable terminal block connector• LED display to indicate the I/O status• Analog Input• Internal resistors (125Ω) selectable in Differential

mode• RoHS compliant

Making Data Acquisition Simple

EIP-2017Number of nodes that can be in one network:

Page 10: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

Applications

Making Data Acquisition Simple

Page 11: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

WF-2000 SeriesEIP-2017

Isolated 8-ch DIFF / 16-ch SE Analog Input EtherNet/IP module

EIP-2019

Isolated 8-ch Thermocouple Analog Input EtherNet/IP module

EIP-2042

Isolated 16 channel DO EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C

EIP-2051

Isolated 16 channel DI EtherNet/IP Module, supports operating temperatures from -25°C ~ +75°C

EIP-2055

Isolated 8 channel DI and 8 channel DO EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C

EIP-2060

Isolated 6 channel DI and 6 channel Relay Output EtherNet/IP I/O module, supports operating temperatures from -25°C ~ +75°C

Making Data Acquisition Simple

EIP-2000 Series

Page 12: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

PM-3000 Power Meters

Features:• True RMS Power Measurements• Energy Analysis for 1P2W, 1P4W• Current Measurements Up to 200 A with Different CT Ratio• Voltage Measurements Up to 300 V• Clip-on CT for Easy Installation• W Accuracy Better than 1% (PF=1)• Supports RS-485, Ethernet or CAN bus/CANopen Interface• Supports Modbus RTU, Modbus TCP or CAN Protocol• Supports 2 Power Relay Output (Form A)• Supports PoE (IEEE 802.3af, Class 1)

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 13: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

PMC-5151 Power Meter ConcentratorsFeatures:• Built-in Web Server: Set up parameters and view data via web browser• View Real-time trend or historical trend• Generate Power Data Reports ( daily report and monthly reports )• Built-in MicroSD card slot for Data Storage• Send Power Meter Data files based on a Schedule via FTP • Send Email & SMS alarm and notification messages ( SMS messages need GSM

Modems like GTM-201-USB to get sent) • Web based HMI Tools for easy HMI development• Modbus TCP/RTU Slave functions allow seamless integration with SCADA

software• PMC Data Server allows importing of power data from database systems• Built-in IF-THEN-ELSE logic engine can be used to turn devices on or off based

on configured power usage • Scheduling function for operations of I/O modules (devices)• Support Modbus I/O modules that enable real-time control and management of the devices

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 14: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

Application

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 15: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

TPD & VPD HMI PLC Features:• A tiny touch screen controller HMI designed for building and home automation. • Equipped with a high resolution TFT color touch screen• Fits in regular electrical wall-mount outlets• Excellent C/P ratio (cost/performance)• High resolution color touch screen• PoE, Power over Ethernet• Free development tool, HMIWorks

Features:• Excellent Cost/Performance ratio• High-resolution color touch screen• RS-485 (including Self-Tuner)• RTC (Real Time Clock)• Speaker• WYSIWYG (What You See Is What You Get) GUI design

TPD-430

Making Data Acquisition Simple

TPD-283/U

VPD-130

• 3.5” Touch HMI device• RS-232/RS-485 port• USB port• Real Time Clock and DIN

Rail Mount

New Product Presentation for Wes Moore

Page 16: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

HMIWorks Development Software

• WYSIWYG Intuitive Design

• Built-in and Extensible Graphics Library

Making Data Acquisition Simple

New Product Presentation for Wes Moore

• C Language and Ladder Diagram Programming

• Wide range of Objects and Tools Shorten Development Time

Page 17: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

Applications

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 18: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

GT-540 Device Servers

Making Data Acquisition Simple

GT-540

Features:• Automatic/continuous GPRS Link Management• Support Modbus RTU protocol to connect to Max 3

Modbus RTU devices via RS-485 port• Support M2M OPC server for SCADA system• Easy-to-use API tool for users to develop their

applications by various program development tools• Be the GPRS I/O devices• Support data transferring by E-mail• Local I/O linkage function to make the simple local

control• Support 3.7V Li-ion Battery backup• Power supply 10 ~ 30 VDC

New Product Presentation for Wes Moore

Page 19: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

GT-540 Application

Making Data Acquisition Simple

New Product Presentation for Wes Moore

Page 20: New Product Presentation - Data Acquisition, Data Communication, PLCs, Automation and Control Systems

BNET-5310 Multi-Function BACnet/IP with I/O

Features:• 4 AI channels, 2 AO channel, 3 DI channels and 3 DO

channels.• built-in web server• Protocol: BACnet/IP

Applications:

Making Data Acquisition Simple

New Product Presentation for Wes Moore


Top Related