new page no. · page no. c177 preboring reference chart insert information & reference chart...
TRANSCRIPT
Page No.
C177
Preboring Reference Chart
C158-C159Insert Information & Reference Chart
C160-C166
C179-C180
C181-C182
C175
C167-C170
C172-C173
Advantages when using RAMPA Inserts
• Quicker insertion due to sharp edged continuous cutting thread
• Cylindrical shape - higher pull out resistance
• Mild Steel, Brass or Stainless Steel - strong materials - wood will break first
Why use Connecting Systems
• For invisible angle connections
• Provides strong connection for heavy duty projects
• Solution for a large variety of thicknesses of materials
• Allows for flat packaging of components to reduce shipping damage and space required
Advantages when using RAMPA Joint Connector Bolts
• RAMPA screws Type K series have a hex drive and decorative head creating a durable and appealing appearance for visible joints
• Available in imperial and metric sizes
• Commonly used in all types of fastening applications
Advantages when using RAMPA Cross Dowels
• RAMPA Cross Dowel Type Q with slot is used in numerous applications providing a stable connection
Advantages when using RAMPA Installation Tools
• Specially engineered to speed the insertion process and reduce friction. Up to an M8 driver can be used with most standard power drills/drivers
Advantages when using RAMPA Joint Connector Nuts
• Used in many applications such as cabinetry, store fixtures, furniture, etc.
• Hex drive and decorative finish available in flathead (RFL) and mushroom head (RTL)
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Rampa® Products Table of Contents
Threaded Inserts
C166
A generous selection of RAMPA Type SK or ES metric inserts for virtually all types of wood, metal and plastic applications. No matter the project or repair you will be sure to find the right size, right away every time.
Repairboxes
Connecting Housings
Joint Connector Bolts
Joint Connector Nuts
Cross Dowels
Threaded InsertInstallation Tools
C15722 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Type B & BL...............C160
Type SK & DVZ..........C161
Type SKL & SKZ.........C162
Type SKDZ & SKD......C163
Type BAN & BAV.......C164
Type ES & TS.............C165
Bolt Type KF ..............C172
Bolt Type KFS& Screw Type KT .......C173
Type 504/506/507....C179
Type KR/515 ............C180
Cap Nut TypeRFL & RTC .................C175
Type Q .....................C177
Table des matières des produits RampaMD
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inserts
C15823 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
EXAMPLE APPLICATIONSFOR SCREW-IN & KNOCK-IN INSERTS
RAMPA Screw-in Insert Type SKD + KT
The RAMPA Screw-in Insert type SKD allows a hidden assembling of furniture elements together with RAMPA Mushroomhead Screws with hex drive Type KT. Due to the design of the insert, the components will be flush mounted and allow an extensive work load.
The Knock-in Insert type TS with its knurled shank is driven into the wood. The board is attached from above with a RAMPA Flathead Screw type KF.
ADVANTAGES WHEN USING RAMPA INSERTS
• Quicker insertion due to sharp edged continuous cutting thread
• Cylindrical shape - higher pull out resistance
• Mild Steel, Brass or Stainless Steel - strong materials - wood will break first
WHY USE AN INSERT WITH A FLANGE?
• Flange covers rough edges of the hole, providing cleaner smoother appearance
• Provides a stopping point for inserting
RAMPA Knock-in Insert Type TS + KF
INSERTS
European Technical
Approval No. ETA-12/0481 Standard for holding strength.
Inserts
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Insert Reference Chart
C159
Recommended Materials
Product Type
Soft Woods- Plywood,
Chipboard
Medium Density Wood
Hardwoods, MDF
Metal Plastic Flange? Drive Type RAMPA Tooling Options
ETA Approved
RoHS Compliant
B Ÿ Ÿ Ɣ N Slot 507, 515 X
SK Ɣ Ÿ Ÿ N Hex 506, KR, 515 X
SKZ Ÿ Ɣ Ɣ N Hex 506, KR, 515
SKDZ Ÿ Y Hex 506, KR, 515
SKD Ÿ Ÿ Ÿ Y Hex 506, KR, 515 X
ES Ɣ Ɣ Ÿ Ÿ N Threaded 515 X
TS Ɣ Ɣ Ɣ Ɣ Ɣ N Knock-in N/A X
Q Ɣ Ɣ Ɣ Ɣ Ɣ N Knock-in N/A X
SKL Ɣ Ÿ Ÿ N Hex 515 X X
BL Ÿ Ɣ N Threaded 515 X X
DVZ Ɣ Ÿ Y Threaded 515
BAN/BAV Ɣ Ÿ Ÿ Ÿ N Threaded 515 X
Ÿ Best Application Ɣ Possible Application E.T.A- European Technical Approval
RAMPA INSERT REFERENCE CHARTNEW
ESSKZ SKDB SK SKDZ
BAVBANBL DVZSKLTS Q
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Did you know?
RAMPA invented the original insert D.I.N 7965- slot drive (Type B) over 100 years ago to provide a stronger more stable connection which
could be assembled numerous times while concealing the connection.
Tableau de référence des inserts
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Inserts Type B & BL
C160
RAMPA-INSERTS TYPE B
RAMPA-INSERTS TYPE BL
Internal Thread
Size (d)O.D. (D)
Overall Length
(L)
Internal Thread
Length (L1)PKG QTY.
M12 22 mm 60 mm 24 mm 5
M12 22 mm 80 mm 24 mm 5
M12 22 mm 100 mm 24 mm 5
M16 25 mm 60 mm 24 mm 5
M16 25 mm 80 mm 24 mm 5
M16 25 mm 100 mm 24 mm 5
METRIC
RAMPA-INSERTS TYPE BL
INCH AND METRIC
RAMPA-INSERTS TYPE B
Internal Thread
Size (d)O.D. (D) Length (L) Finish PKG QTY.
1/4-20 12 mm 12 mm Zinc 501/4-20 12 mm 10 mm Zinc 501/4-20 12 mm 15 mm Zinc 503/8-16 18.5 mm 18 mm Zinc 253/8-16 18.5 mm 25 mm Zinc 255/16-18 14 mm 15 mm Zinc 505/16-18 14 mm 18 mm Zinc 508-32 8 mm 8 mm Zinc 5010-24 10 mm 12 mm Zinc 50M4 8 mm 8 mm Zinc 50M5 10 mm 12 mm Zinc 50M6 12 mm 10 mm Zinc 50M6 12 mm 12 mm Zinc 50M6 12 mm 15 mm Zinc 50M8 14 mm 15 mm Zinc 50M8 14 mm 18 mm Zinc 50M10 18.5 mm 15 mm Zinc 25
SPAENAUR No.
625-A20-2T625-A53-2Y625-A54-2C625-A56-2T625-A57-2K625-A21-2K625-A55-2N625-A51-2A625-A52-2P625-A46-1W625-A47-1M625-A48-1X625-A17-1N625-A18-1T625-A19-1K625-A49-1A625-A50-1X
SPAENAUR No.
625-A58-1W
*625-A59-1M
*625-A60-1W
625-A61-1M
*625-A62-1X
*625-A63-1A
Best Application: Soft & Medium Density Wood. Possible Application: Plastic.
Best Application: Soft Woods, Plywood, Chipboard.
Possible Application: Medium Density Woods.
For insert tools see pages C178-C180.
Refer to the RAMPA Pre-bore Reference Chart on pages C181-C182.
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Inserts de types B et BL
NEW
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Inserts Type SK & DVZ
C161
METRIC
RAMPA-INSERTS TYPE SK
Internal
Thread Size
(d)
O.D. (D) Length (L) Key Size (SW) Material PKG QTY.SPAENAUR No.
1/4-20 12 mm 12 mm 6 mm Zinc 50625-A28-2C1/4-20 12 mm 15 mm 6 mm Zinc 50625-A29-2N1/4-20 12 mm 18 mm 6 mm Zinc 50625-A30-2C1/4-20 12 mm 30 mm 6 mm Zinc 25625-A31-2N1/4-20 12 mm 10 mm 6 mm Zinc 50625-A88-2P1/4-20 12 mm 20 mm 6 mm Zinc 50625-A89-2Y3/8-16 18.5 mm 30 mm 10 mm Zinc 10625-A35-2M5/16-18 14 mm 15 mm 8 mm Zinc 25625-A32-2T5/16-18 14 mm 30 mm 8 mm Zinc 25625-A33-2K5/16-18 16 mm 30 mm 8 mm Zinc 10625-A34-2W5/16-18 14 mm 18 mm 8 mm Zinc 25625-A90-2P8-32 8 mm 10 mm 4 mm Zinc 50625-A26-2P10-24 10 mm 12 mm 5 mm Zinc 50625-A27-2YM4 8 mm 10 mm 4 mm Zinc 50625-A22-1WM4 8 mm 8 mm 4 mm Stainless Steel 25625-A75-1AM5 10 mm 12 mm 5 mm Zinc 50625-A23-1MM5 10 mm 12 mm 5 mm Stainless Steel 10625-A76-1PM6 12 mm 12 mm 6 mm Zinc 50625-A24-1XM6 12 mm 10 mm 6 mm Zinc 50625-A77-1YM6 12 mm 15 mm 6 mm Zinc 50625-A78-1CM6 12 mm 15 mm 6 mm Stainless Steel 10625-A79-1NM6 12 mm 18 mm 6 mm Zinc 50625-A80-1CM6 12 mm 20 mm 6 mm Zinc 50625-A81-1NM8 14 mm 15 mm 8 mm Zinc 25625-A25-1AM8 16 mm 18 mm 8 mm Stainless Steel 10625-A82-1TM8 14 mm 18 mm 8 mm Zinc 25625-A83-1KM8 14 mm 30 mm 8 mm Zinc 25625-A84-1WM8 16 mm 30 mm 8 mm Zinc 25625-A85-1MM10 18.5 mm 20 mm 10 mm Zinc 25625-A86-1XM10 18.5 mm 30 mm 10 mm Zinc 10625-A87-1A
INCH AND METRIC
RAMPA-INSERTS TYPE SK
RAMPA-INSERTS TYPE DVZ
Internal Thread Size (d) Length (L) Head Dia. (D1) PKG QTY.SPAENAUR No.
M5 7 mm 16 mm 50625-B04-1MM6 7 mm 16 mm 50625-B05-1X
RAMPA-INSERTS TYPE DVZ
22 FEB 2018
Best Application: Medium & Hard Woods. Possible Application: Soft Woods, Plywood & Chipboard.
Best Application: Medium Density Woods. Possible Application: Soft Woods, Plywood & Chipboard.
C180.
See Repair Boxes on page C166
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Inserts de types SK et DVZ
NEW
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Inserts Type SKL & SKZ
Best Application: Hard & Medium Density Wood.
Possible Application: Soft Woods, Plywood & Chipboard
Best Application: Soft Woods, Plywood & Chipboard
Possible Application: Medium Density Wood.
C162
RAMPA-INSERTS TYPE SKL
Internal
Thread Size
(d)
O.D. (D)Overall
Length (L)Thread
Length (L1)
Key Size (SW) PKG QTY.SPAENAUR No.
M8 16 mm 40 mm 22 mm 8 mm 5625-A64-1P
M8 16 mm 50 mm 22 mm 8 mm 5*625-A65-1Y
M8 16 mm 60 mm 22 mm 8 mm 5*625-A66-1C
M10 18.5 mm 50 mm 21 mm 10 mm 5625-A67-1N
M10 18.5 mm 70 mm 21 mm 10 mm 5*625-A68-1T
M12 22 mm 60 mm 25 mm 12 mm 5625-A69-1K
M12 22 mm 80 mm 25 mm 12 mm 5*625-A70-1T
M12 22 mm 100 mm 25 mm 12 mm 5*625-A71-1K
M16 25 mm 60 mm 25 mm 14 mm 5625-A72-1W
M16 25 mm 80 mm 25 mm 14 mm 5*625-A73-1M
M16 25 mm 100 mm 25 mm 14 mm 5*625-A74-1X
RAMPA-INSERTS TYPE SKL
RAMPA-INSERTS TYPE SKZ
Internal
Thread Size
(d)
O.D. (D) Length (L) Key Size (SW) Finish PKG QTY.SPAENAUR No.
1/4-20 11.5 mm 13 mm 6 mm Blue Zinc 50625-B34-1Y1/4-20 11.5 mm 20 mm 6 mm Blue Zinc 50625-B35-1C5/16-18 14 mm 13 mm 8 mm Blue Zinc 50625-B36-1N5/16-18 14 mm 20 mm 8 mm Blue Zinc 50625-B37-1T8-32 7.5 mm 10 mm 4 mm Blue Zinc 50625-B32-1A10-24 11 mm 13 mm 5 mm Blue Zinc 50625-B33-1PM4 7.5 mm 10 mm 4 mm Yellow Zinc 50625-B26-1KM5 11 mm 13 mm 5 mm Yellow Zinc 50625-B27-1WM6 11.5 mm 13 mm 6 mm Yellow Zinc 50625-B28-1MM6 11.5 mm 20 mm 6 mm Yellow Zinc 50625-B29-1XM8 14 mm 13 mm 8 mm Yellow Zinc 50625-B30-1MM8 14 mm 20 mm 8 mm Yellow Zinc 50625-B31-1X
RAMPA-INSERTS TYPE SKZ
INCH AND
22 FEB 2018
For insert tools see pages C178-C180.
Refer to the RAMPA Pre-bore Reference Chart on pages C181-C182.
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
Inserts de types SKL et SKZ
NEW
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Inserts Type SKDZ & SKD
C163
RAMPA-INSERTS TYPE SKD
Internal
Thread Size
(d)
O.D. (D) Length (L) Key Size (SW) Finish PKG QTY.SPAENAUR No.
1/4-20 12 mm 12 mm 6 mm Zinc 25625-A99-2A1/4-20 12 mm 15 mm 6 mm Zinc 25625-B01-2T3/8-16 18.5 mm 20 mm 10 mm Zinc 10625-B03-2W5/16-18 14 mm 15 mm 8 mm Zinc 25625-B02-2K8-32 8 mm 8 mm 4 mm Zinc 50625-A97-2M10-24 10 mm 12 mm 5 mm Zinc 50625-A98-2XM4 8 mm 8 mm 4 mm Zinc 50625-A91-1YM5 10 mm 12 mm 5 mm Zinc 50625-A92-1CM6 12 mm 12 mm 6 mm Zinc 25625-A93-1NM6 12 mm 15 mm 6 mm Zinc 25625-A94-1TM8 14 mm 15 mm 8 mm Zinc 25625-A95-1KM10 18.5 mm 20 mm 10 mm Zinc 10625-A96-1W
RAMPA-INSERTS TYPE SKD
RAMPA-INSERTS TYPE SKDZ
Internal
Thread Size
(d)
O.D. (D) Length (L) Key Size (SW) Finish PKG QTY.SPAENAUR No.
1/4-20 12.5 mm 13 mm 6 mm Blue Zinc 50625-B22-1Y1/4-20 12.2mm 20mm 6 mm Blue Zinc 50625-C01-1W1/4-20 12.5 mm 25 mm 6 mm Blue Zinc 50625-B23-1C3/8-16 16 mm 13 mm 10 mm Blue Zinc 50625-B25-1T5/16-18 14.5 mm 13 mm 8 mm Blue Zinc 50625-B24-1N8-32 8.5 mm 10 mm 4 mm Blue Zinc 50625-B20-1A10-24 11.5 mm 13 mm 5 mm Blue Zinc 50625-B21-1PM4 8.5 mm 10 mm 4 mm Yellow Zinc 50625-A40-1PM5 11.5 mm 13 mm 5 mm Yellow Zinc 50625-A41-1YM5 11.5 mm 10 mm 5 mm Yellow Zinc 50625-B13-1TM5 11.5 mm 20 mm 5 mm Yellow Zinc 50625-B14-1KM6 12.5 mm 13 mm 6 mm Yellow Zinc 50625-A42-1CM6 12.5 mm 20 mm 6 mm Yellow Zinc 50625-A43-1NM6 12 mm 10 mm 6 mm Yellow Zinc 50625-B15-1WM6 12.5 mm 16 mm 6 mm Yellow Zinc 50625-B16-1MM6 12.5 mm 25 mm 6 mm Yellow Zinc 50625-B17-1XM8 14.5 mm 13 mm 8 mm Yellow Zinc 50625-A44-1TM8 14.5 mm 18 mm 8 mm Yellow Zinc 50625-B18-1AM10 16 mm 13 mm 10 mm Yellow Zinc 50625-A45-1KM10 16 mm 25 mm 10 mm Yellow Zinc 50625-B19-1P
RAMPA-INSERTS TYPE SKDZ
INCH AND
INCH AND
22 FEB 2018
Best Application: Soft Woods, Plywood & Chipboard.
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Best Application: Hard, Medium Density & Soft Woods, Plywood & Chipboard.
For insert tools
see pages
C178-C180.
Refer to the
RAMPA Pre-bore
Reference Chart
on pages C181-
C182.
METRIC
METRIC
Inserts de types SKDZ et SKD
NEW
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C164
Inserts Type BAN & BAV
RAMPA-INSERTS TYPE BAN
Internal Thread Size
(d)
External Thread Size
(D)Length (L) PKG QTY.
M6 10 x 1.25 mm 12 mm 25
M8 12 x 1.5 mm 14 mm 25
SPAENAUR No.
628-B71-1M
628-B74-1P
RAMPA-INSERTS TYPE BAN
RAMPA-INSERTS TYPE BAV
Internal Thread
Size (d)
External
Thread Size (D)
Length
(L)Material PKG QTY.
M4 6.5 x 0.8 mm 6 mm Case Hardened Steel Zinc 25
M4 6.5 x 0.8 mm 6 mm 1.4305 Stainless Plain 10
M5 8 x 1 mm 7 mm Case Hardened Steel Zinc 25
M5 8 x 1 mm 7 mm 1.4305 Stainless Plain 10
M6 10 x 1.25 mm 8 mm Case Hardened Steel Zinc 25
M6 10 x 1.25 mm 8 mm 1.4305 Stainless Plain 10
M8 12 x 1.5 mm 9 mm Case Hardened Steel Zinc 25
M8 12 x 1.5 mm 9 mm 1.4305 Stainless Plain 10
M10 14 x 1.5 mm 10 mm Case Hardened Steel Zinc 25
RAMPA-INSERTS TYPE BAV
SPAENAUR No.
628-B65-1N
628-B66-1T
628-B67-1K
628-B68-1W
628-B69-1M
628-B70-1W
628-B72-1X
628-B73-1A
628-B75-1Y
For insert tools see pages C178-C180.
Refer to the RAMPA Pre-bore Reference Chart on pages C181-C182.
Best Application: Plastic, Metal & Hardwood MDF. Possible Application: Medium Density Wood.
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Best Application: Plastic, Metal & Hardwood MDF. Possible Application: Medium Density Wood.
METRIC
METRIC
Inserts de types BAN et BAV
NEW
NEW
Insert Type SKD Insert Type ES Insert Type BAV
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Inserts Type ES & TS
C165
RAMPA-INSERTS TYPE ES
RAMPA-KNOCK-IN INSERTS TYPE TS
INCH AND
INCH AND
RAMPA-INSERTS TYPE ES
Internal
Thread Size (d)
External
Thread Size (D)Length (L) Material PKG QTY.SPAENAUR No.
1/4-20 10 x 1.5 14 mm Case Hardened Steel Zinc 25628-B57-1M1/4-20 9 x 1.0 12 mm Case Hardened Steel Zinc 50628-B59-1A5/16-18 12 x 1.50 15 mm Case Hardened Steel Zinc 25628-B58-1X8-32 6.5 x 0.75 8 mm Case Hardened Steel Zinc 50628-B55-1K10-24 8 x 1.0 10 mm Case Hardened Steel Zinc 50628-B56-1WM4 6.5 x 0.75 8 mm Case Hardened Steel Zinc 50628-B51-1YM4 6.5 x 0.75 8 mm Stainless Steel 10628-B60-1XM5 8 x 1.0 10 mm Case Hardened Steel Zinc 50628-B52-1CM5 8 x 1.0 10 mm Stainless Steel 10628-B61-1AM6 10 x 1.5 14 mm Case Hardened Steel Zinc 25628-B53-1NM6 9 x 1.0 12 mm Case Hardened Steel Zinc 50628-B62-1PM6 10 x 1.5 14 mm Stainless Steel 10628-B63-1YM8 12 x 1.50 15 mm Case Hardened Steel Zinc 25628-B54-1TM8 12 x 1.50 15 mm Stainless Steel 10628-B64-1C
RAMPA-KNOCK-IN INSERTS TYPE TS
Internal
Thread Size
(d)
O.D. (D) Length (L) Head Dia. (D1) Finish PKG QTY.SPAENAUR No.
1/4-20 8.5 mm 7.7 mm 12 mm Zinc 50625-B12-2N1/4-20 8.5 mm 12 mm 12 mm Zinc 50625-A37-2A3/8-16 12.5 mm 12 mm 18.5 mm Zinc 25625-A39-2Y5/16-18 10.5 mm 12 mm 15 mm Zinc 25625-A38-2P8-32 5.5 mm 8 mm 8 mm Zinc 50625-A36-2XM4 5.5 mm 8 mm 8 mm Zinc 50625-B06-1AM5 6.5 mm 10 mm 10 mm Zinc 50625-B07-1PM6 8.5 mm 7.7 mm 12 mm Zinc 50625-B08-1YM6 8.5 mm 12 mm 12 mm Zinc 50625-B09-1CM8 10.5 mm 12 mm 15 mm Zinc 25625-B10-1YM10 12.5 mm 12 mm 18.5 mm Zinc 25625-B11-1C
22 FEB 2018
See Repair Boxes on page C166
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Best Application: Metal & Plastic. Possible Application: Hard & Medium Density Wood.
RAMPA Knock-in Insert Type TS + KFThe Knock-in Insert type TS with its knurled shank is driven into the wood.
The board is attached from above with a RAMPA Flathead Screw type KF.
For insert tools see pages C178-C180.
Refer to the RAMPA Pre-bore Reference Chart on pages C181-C182.
METRIC
METRIC
Inserts de types ES et TS
NEW
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C166
Inserts Type ES Repairbox / Inserts Type SK Repairbox
RAMPA-REPAIRBOX TYPE ES
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
RAMPA-REPAIRBOX TYPE SK
METRIC
METRIC
RAMPA-REPAIRBOX TYPE ES
PKG QTY.SPAENAUR No.
1805-A02-1T
RAMPA-REPAIRBOX TYPE SK
PKG QTY.SPAENAUR No.
1805-A01-1N
D L d PKG QTY.
M5 X 0.5 6 mm M3 30
M6.5 X 0.75 8 mm M4 50
M8 X 1 8 mm M5 20
M8 X 1 10 mm M5 40
M9 X 1 8 mm M6 20
M9 X 1 12 mm M6 20
M10 X 1.5 14 mm M6 40
M12 X 1.5 12 mm M8 20
M12 X 1.5 15 mm M8 30
M14 X 1.5 18 mm M10 20
M16 X 1.5 22 mm M12 5
M20 X 1.5 25 mm M16 2
D L d SW PKG QTY.
8 mm 8 mm M4 4 mm 40
8 mm 10 mm M4 4 mm 25
10 mm 10 mm M5 5 mm 50
10 mm 12 mm M5 5 mm 30
12 mm 12 mm M6 6 mm 40
12 mm 15 mm M6 6 mm 20
12 mm 20 mm M6 6 mm 20
14 mm 15 mm M8 8 mm 25
16 mm 18 mm M8 8 mm 20
16 mm 23 mm M8 8 mm 10
18.5 mm 20 mm M10 10 mm 10
18.5 mm 25 mm M10 10 mm 10
REPAIRBOX CONTENT
REPAIRBOX CONTENT
For insert tools see pages C178-C180.
Refer to the RAMPA Pre-bore Reference
Chart on pages C181-C182.
Inserts ES Boîte de réparation / Inserts SK Boîte de réparation
NEW
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C167
Connecting Housings
EXAMPLE APPLICATION
WHY USE CONNECTING SYSTEMS?
•
•
•
•
For more CONNECTING SYSTEMS, see Section B
CONNECTING HOUSINGS
Combination of Housing (VQ or VQB or VQBR), Bolt (VB) and
Screw (VS) with an M6 or M8 insert (as per chart on C170).
23 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Boîtiers pour connexion
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C168
Joint Connector Bolts / Connecting Housing
The bolt component part of RAMPA’s VX type angle connection system provides a heavy duty connection which is completely hidden when assembled from the interior.
STEEL ZINC PLATED
RAMPA-CONNECTING BOLTS TYPE VB
A connector housing component part of RAMPA’s VX type angle connection system featuring a collar and rounded inside end. VX Provides a heavy duty connection which is completely hidden when assembled from the interior.
STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQBR
RAMPA-CONNECTING BOLTS TYPE VB
SPAENAUR No.
226-G21-1C
226-G22-1N
226-G23-1T
Thread Size (d1)
Pin Dia. (D2) Length (L)Overall Length (L1)
Pin Length (L2)
PKG QTY.
M8 8 mm 46 mm 30 mm 37 mm 25
M6 10 mm 46 mm 30 mm 37 mm 25
M8 10 mm 55 mm 38 mm 46 mm 25
RAMPA-CONNECTING HOUSING TYPE VQBR
Thread Size (d) Length (L3)
Body Dia. (D) D1 D2 L4 PKG QTY.SPAENAUR No.
M8 15 mm 14 mm 15.5 mm 8 mm 9 mm 25226-G24-1K
Material Thickness
(mm)
SPAENAUR No.Housing
Housing Type
SPAENAUR No. Bolt VB Insert
SPAENAUR No.Screws VS
19226-G24-1K VQBR 226-G21-1C M8 481-C04-1W
25226-G17-1P VQB 226-G21-1C M8 481-C04-1W
30226-G18-1Y VQB 226-G22-1N M6 481-C05-1M
30226-G18-1Y VQB 226-G23-1T M8 481-C05-1M
20226-G19-1C VQ 226-G21-1C M8 481-C04-1W
25226-G20-1Y VQ 226-G22-1N M6 481-C05-1M
25226-G20-1Y VQ 226-G23-1T M8 481-C05-1M
VX SELECTION GUIDE
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
Boulons d'assemblage / Boîtier pour connexion
NEW
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C169
Connecting Housings / Set Screws
A connector housing component part of RAMPA’s VX type angle connection system featuring a collar. VX Provides a heavy duty connection which is completely hidden when assembled from the interior.
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQB
A connector housing component part of RAMPA’s VX type angle connection system without a collar for variable depth. VX Provides a heavy duty connection which is completely hidden when assembled from the interior.
RAMPA-CONNECTING HOUSING TYPE VQ
Thread Size (d) Body Dia. (D) D2 Length (L3) L4 D1 PKG QTY.SPAENAUR No.
M8 14 mm 8 mm 16 mm 10 mm 14 mm 25226-G19-1C
M10 16 mm 10 mm 20.5 mm 12.5 mm 16 mm 25226-G20-1Y
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQ
The set screw component part of RAMPA’s VX type angle connection system provides a heavy duty connectionwhich is completely hidden when assembled from the interior.
RAMPA-CONNECTING SCREWS TYPE VS
Thread Size (d) Length (L5) PKG QTY.SPAENAUR No.
M8 10 mm 25481-C04-1W
M10 13 mm 25481-C05-1M
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING SCREWS TYPE VS
RAMPA-CONNECTING HOUSING TYPE VQB
Thread Size (d) Body Dia. (D) D1 Length (L3) L4 D2 PKG QTY.SPAENAUR No.
M8 14 mm 16 mm 17 mm 12.5 mm 8 mm 25226-G17-1P
M10 16 mm 17 mm 23 mm 15 mm 10 mm 25226-G18-1Y
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
METRIC
Boîtiers pour connexion / Vis de pression
NEW
NEW
NEWCATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C170
VX Selection Guide
Material Thickness
(mm)
SPAENAUR No.Housing
Housing Type
SPAENAUR No. Bolt VB Insert
SPAENAUR No.Screws VS
19226-G24-1K VQBR 226-G21-1C M8 481-C04-1W
25226-G17-1P VQB 226-G21-1C M8 481-C04-1W
30226-G18-1Y VQB 226-G22-1N M6 481-C05-1M
30226-G18-1Y VQB 226-G23-1T M8 481-C05-1M
20226-G19-1C VQ 226-G21-1C M8 481-C04-1W
25226-G20-1Y VQ 226-G22-1N M6 481-C05-1M
25226-G20-1Y VQ 226-G23-1T M8 481-C05-1M
VX SELECTION GUIDE
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQBR
METRIC
STEEL ZINC PLATED
RAMPA-CONNECTING BOLTS TYPE VB
METRIC
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQB
METRIC
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING HOUSING TYPE VQ
METRIC
DIE CAST STEEL ZINC PLATED
RAMPA-CONNECTING SCREWS TYPE VS
METRIC
Guide de sélection VX
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Joint Connector Bolts
C171
ADVANTAGES OF USE
• RAMPA screws Type K series have a hex drive and decorative head creating a durable and appealing appearance for visible joints.
• Available in imperial and metric sizes.
• Commonly used in all types of fastening applications.
For more SCREWS, see Section B
JOINT CONNECTOR BOLTS
Types KF, KFS, and KT Class/grade 4.8 Steel
Commonly referred to as bolts in North America
23 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Boulons d'assemblage
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Joint Connector Bolts Type KF
C172
These screws feature a decorative flathead design with a hex drive for visible joint applications. Use in conjunction with RFL cap nuts for a consistent look (page C175), but can be used in all types of fastening applications.
CLASS/GRADE 4.8 STEEL ZINC PLATED
RAMPA-FLATHEAD SCREWS TYPE KF
RAMPA Knock-in Insert Type TS + KF
The Knock-in Insert type TS with its knurled shank is driven into the wood.The board is attached from above with a RAMPA Flathead Screw type KF.
INCH AND
(TYPES: BB, BC, JCBC, JCB)
RAMPA-FLATHEAD SCREWS TYPE KF
Thread Size
(d)Length (L) Head Dia. (D1) Hex A/F (SW) Finish PKG QTY.SPAENAUR No.
1/4-20 16 mm 15 mm 4 mm Zinc 50191-M61-1X1/4-20 20 mm 15 mm 4 mm Zinc 50191-M62-1A1/4-20 30 mm 15 mm 4 mm Zinc 50191-M63-1P1/4-20 40 mm 15 mm 4 mm Zinc 50191-M64-1Y1/4-20 45 mm 15 mm 4 mm Zinc 50191-M65-1C1/4-20 70 mm 15 mm 4 mm Zinc 50191-M66-1NM6 20 mm 15 mm 4 mm Zinc 50191-M17-1NM6 70 mm 15 mm 4 mm Zinc 50191-M18-1NM6 12 mm 15 mm 4 mm Zinc 50191-M47-1XM6 16 mm 15 mm 4 mm Zinc 50191-M48-1AM6 25 mm 15 mm 4 mm Zinc 50191-M49-1DM6 30 mm 15 mm 4 mm Zinc 50191-M50-1AM6 35 mm 15 mm 4 mm Zinc 50191-M51-1PM6 40 mm 15 mm 4 mm Zinc 50191-M52-1YM6 45 mm 15 mm 4 mm Zinc 50191-M53-1CM6 50 mm 15 mm 4 mm Zinc 50191-M54-1NM6 60 mm 15 mm 4 mm Zinc 50191-M55-1TM6 80 mm 15 mm 4 mm Zinc 50191-M56-1KM6 90 mm 15 mm 4 mm Zinc 25191-M57-1WM8 25 mm 17 mm 5 mm Zinc 50191-M58-1MM8 45 mm 17 mm 5 mm Zinc 50191-M59-1XM8 50 mm 17 mm 5 mm Zinc 50191-M60-1M
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
Boulons d'assemblage de type KF
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Joint Connector Bolts Type KFS / Screws Type KT
C173
These decorative flathead screws for visible joint applications feature a hex drive and shoulder. Use in conjunction with RFL cap nuts for a consistent look (page C175), but can be used in all types of fastening applications.
CLASS 4.8 STEEL NICKEL PLATED
RAMPA-FLATHEAD SCREWS TYPE KFS
These screws feature a decorative mushroom head design with a hex drive for visible joint applications. Use inconjunction with RTL cap nuts for a consistent look (page C175), but can be used in all types of fastening applications.
CLASS/g RADE 4.8 STEEL ZINC PLATED
RAMPA-MUSHROOM HEAD SCREWS TYPE KT
INCH AND
(TYPES: SHOULDER BOLT)
(TYPES: BB, BC, JCBC, JCD)
RAMPA-FLATHEAD SCREWS TYPE KFS
SPAENAUR No.
191-M67-1T
191-M68-1K
191-M69-1W
191-M70-1K
191-M71-1W
191-M72-1M
Thread Size (d) Length (L) L2
Shoulder Dia. (D)
Head Dia. (D1)
Key Size (SW) PKG QTY.
M6 23 mm 8.5 mm 8.9 mm 17 mm 5 mm 25
M6 30 mm 8.5 mm 8.9 mm 17 mm 5 mm 25
M6 40 mm 8.5 mm 8.9 mm 17 mm 5 mm 25
M6 50 mm 16.5 mm 8.9 mm 17 mm 5 mm 25
M6 60 mm 16.5 mm 8.9 mm 17 mm 5 mm 25
M6 70 mm 16.5 mm 8.9 mm 17 mm 5 mm 25
SPAENAUR No.
191-M41-1C191-M42-1N191-M43-1T191-M44-1K191-M45-1W191-M46-1M191-M19-1W191-M20-1K191-M27-1C191-M28-1N191-M29-1T191-M30-1N191-M31-1T191-M32-1K191-M33-1W191-M34-1M191-M35-1X191-M36-1A191-M37-1P191-M38-1Y191-M39-1C191-M40-1Y
RAMPA-MUSHROOM HEAD SCREWS TYPE KT
Thread Size (d) Length (L) Head Dia. (D1) Key Size (SW) PKG QTY.
1/4-20 16 mm 15 mm 4 mm 501/4-20 20 mm 15 mm 4 mm 501/4-20 30 mm 15 mm 4 mm 501/4-20 40 mm 15 mm 4 mm 501/4-20 45 mm 15 mm 4 mm 501/4-20 70 mm 15 mm 4 mm 50M6 20 mm 15 mm 4 mm 50M6 70 mm 15 mm 4 mm 50M6 12 mm 15 mm 4 mm 50M6 16 mm 15 mm 4 mm 50M6 25 mm 15 mm 4 mm 50M6 30 mm 15 mm 4 mm 50M6 35 mm 15 mm 4 mm 50M6 40 mm 15 mm 4 mm 50M6 45 mm 15 mm 4 mm 50M6 50 mm 15 mm 4 mm 50M6 60 mm 15 mm 4 mm 50M6 80 mm 15 mm 4 mm 50M8 20 mm 17 mm 5 mm 50M8 40 mm 17 mm 5 mm 50M8 60 mm 17 mm 5 mm 50M8 80 mm 17 mm 5 mm 25
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
Boulons d'assemblage de type KFS / Vis de type KT
NEW
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
Recommended Materials
Product Type
Soft Woods- Plywood,
Chipboard
Medium Density Wood
Hardwoods, MDF
Metal Plastic Flange? Drive Type RAMPA Tooling Options
ETA Approved
RoHS Compliant
B Ÿ Ÿ Ɣ N Slot 507, 515 X
SK Ɣ Ÿ Ÿ N Hex 506, KR, 515 X
SKZ Ÿ Ɣ Ɣ N Hex 506, KR, 515
SKDZ Ÿ Y Hex 506, KR, 515
SKD Ÿ Ÿ Ÿ Y Hex 506, KR, 515 X
ES Ɣ Ɣ Ÿ Ÿ N Threaded 515 X
TS Ɣ Ɣ Ɣ Ɣ Ɣ N Knock-in N/A X
Q Ɣ Ɣ Ɣ Ɣ Ɣ N Knock-in N/A X
SKL Ɣ Ÿ Ÿ N Hex 515 X X
BL Ÿ Ɣ N Threaded 515 X X
DVZ Ɣ Ÿ Y Threaded 515
BAN/BAV Ɣ Ÿ Ÿ Ÿ N Threaded 515 X
Ÿ Best Application Ɣ Possible Application E.T.A- European Technical Approval
Did you know?
RAMPA invented the original insert D.I.N 7965- slot drive (Type B) over 100 years ago to provide a stronger more stable connection which
could be assembled numerous times while concealing the connection.
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C174
Joint Connector Nuts
ADVANTAGES OF USE
• Used in many applications such as cabinetry,
•
For more CAP NUTS, see Section C
JOINT CONNECTOR NUTS
Commonly used in conjunction with RAMPA KFS, KF or KT bolt to create
an appealing and stable connection.
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
RAMPA INSERT REFERENCE CHART
Écrous d'assemblage
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C175
Cap Nuts Type RFL & RTL
These cap nuts feature a decorative flathead design with a hex drive for visible joint applications. Commonly used with KF and KFS type screws on pages C171-C173 for a consistent look.
STEEL ZINC PLATED AND NICKEL PLATED
RAMPA-CAP NUTS TYPE RFL
These cap nuts feature a decorative mushroom head design with a hex drive for visible joint applications. Commonly used with KT screws on page C173 for a consistent look.
STEEL ZINC PLATED
RAMPA-CAP NUTS TYPE RTL
(TYPES: JCN, CAP NUT, CHICAGO BOLT)
(TYPES: JCN, CAP NUT, CHICAGO BOLT)
SPAENAUR No.
191-M13-1P
191-M14-1Y
191-M22-1M
191-M23-1X
191-M24-1A
RAMPA-CAP NUTS TYPE RFL
Thread Size
(d)
Body Dia.
(D)
Head Dia.
(D1)Length (L)
Key Size
(SW)Finish PKG QTY.
M6 9 mm 15 mm 12 mm 4 mm Zinc 50
M6 9 mm 15 mm 18 mm 4 mm Zinc 50
M6 9 mm 17 mm 12 mm 5 mm Nickel 25
M6 9 mm 17 mm 17 mm 5 mm Nickel 25
M8 10 mm 19 mm 16 mm 5 mm Zinc 50
SPAENAUR No.
191-M15-1C
191-M16-1N
191-M25-1P
191-M26-1Y
RAMPA-CAP NUTS TYPE RTL
Thread Size
(d)Body Dia. (D) Head Dia. (D1) Length (L) Key Size (SW) PKG QTY.
M6 9 mm 15 mm 12 mm 4 mm 50
M6 9 mm 15 mm 18 mm 4 mm 50
M8 10 mm 20 mm 16 mm 5 mm 50
M10 13 mm 20 mm 13 mm 5 mm 50
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
Écrous à chapeau de type RFL et RTL
NEW
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Cross Dowels
C176
ADVANTAGES OF USE
RAMPA cross dowel Type Q with slot is used in numerous applications providing a stable connection.
For K Series Screws, see pages C171-C173
CROSS DOWELS
Commonly used with RAMPA bolt Type K series.
23 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Boulons transversaux
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Cross Dowels Type Q
C177
Used in conjunction with a the type K screws on pages C171-C173, provide a very strong connection, even in chipboard. Use any flathead screwdriver in the slotted end to help align the threaded hole with the screw for easy installation.
STEEL ZINC PLATED
RAMPA-CROSS DOWELS TYPE Q
Type Q used with Type K
INCH AND
(TYPES: JCD, CROSS DOWEL)
SPAENAUR No.
226-G02-2M226-G03-2X226-G04-2A226-G05-2P226-G08-2N226-G06-2Y226-G09-2T226-G07-2C226-G10-1N226-G11-1T226-G12-1K226-G13-1W226-G14-1W226-G15-1X226-G16-1A
RAMPA-CROSS DOWELS TYPE Q
Thread Size
(d)Body Dia. (D)
Center of Hole
to End (A)
Overall
Length (L)Finish PKG QTY.
1/4-20 10 mm 6 mm 12 mm Zinc 501/4-20 10 mm 6 mm 16 mm Zinc 501/4-20 10 mm 10 mm 20 mm Zinc 501/4-20 10 mm 15 mm 30 mm Zinc 501/4-20 10 mm 10 mm 30 mm Zinc 505/16-18 12 mm 15 mm 30 mm Zinc 505/16-18 12 mm 10 mm 20 mm Zinc 5010-24 10 mm 6 mm 12 mm Zinc 50M6 10 mm 6 mm 12 mm Zinc 50M6 10 mm 6 mm 16 mm Zinc 50M6 10 mm 10 mm 20 mm Zinc 50M6 10 mm 15 mm 30 mm Zinc 50M6 10 mm 10 mm 30 mm Zinc 50M8 12 mm 10 mm 20 mm Zinc 50M8 12 mm 15 mm 30 mm Zinc 50
23 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
Boulons transversaux de type Q
NEW
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
For more TOOLS, see Section P
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Insert Installation Tools
C178
ADVANTAGES OF USE
Specially engineered to speed the insertion process and
reduce friction. Up to an M8 driver can be used with most
standard power drills/drivers.
INSTALLATION TOOLS
RAMPA TOOL TYPES: Driver Types 504, 506, 507
and 515. Allen Key Type KR
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Inch and Metric
Pouce et MétriqueOutils d'installation de douilles
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Installation Tools Type 504 / 506 / 507
C179
Use with a hand held universal driver or power drill to install hex drive threaded inserts, screws, and cap nuts. Manufactured with a shank according to DIN 3126-form E 11.2.
STEEL
RAMPA-DRIVER TYPE 504
Use with a hand-held universal driver or power drill to install hex drive threaded inserts, screws, and cap nuts. Manufactured with a shank according to DIN 3126-form E 6.3.
STEEL
RAMPA-DRIVER TYPE 506
Use with a hand-held universal driver or power drill to install slot drive threaded inserts. Manufactured with a shank according to DIN 3126-form E 6.3.
STEEL PLAIN FINISH
RAMPA-DRIVER TYPE 507
INCH AND
INCH AND
INCH AND
SPAENAUR No.
876-F20-1T876-F21-1K
RAMPA-DRIVER TYPE 504
Key Size (SW) Shank Hex (SW1) PKG QTY.
10 mm E 11.2 112 mm E 11.2 1
SPAENAUR No.
876-F22-1W876-F23-1M876-F24-1X876-F25-1A
RAMPA-DRIVER TYPE 506
Key Size (SW)
4 mm5 mm6 mm8 mm
Shank Hex (SW1) PKG QTY.
1/4 , E 6.3 11/4 , E 6.3 11/4 , E 6.3 11/4 , E 6.3 1
SPAENAUR No.
876-F48-1X876-F47-1M876-F42-1C
RAMPA-DRIVER TYPE 507
Thread Size (d) Insert Type Shank Hex (SW)
M10 (3/8” Internal Thread) SLOTTED 1/4”M6 (1/4” Internal Thread) SLOTTED 1/4”M8 (5/16” Interal Thread) SLOTTED 1/4”
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
METRIC
Outils d'installation de type 504 / 506 / 507
NEW
NEW
NEWCATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Inch and Metric
Pouce et Métrique
Installation Tools Type KR / 515
C180
*Needle Bearing ƔRed internal Thread, Key Size 6.3mm
When used with a power drill, the 515 type bit enables rapid installation of BL, DVZ, BAN, BAV, and ES type inserts.The 515 stud bolt is threaded into the internal thread of the inserts. Manufactured with a shank according to DIN 3126.
STEEL
RAMPA-DRIVER TYPE 515
These hex keys feature case hardened ends for enhanced durability in applications requiring repeated assembly and disassembly like knocked down furniture.
CASE HARDENED STEEL - ZINC PLATED
RAMPA-ALLEN KEYS TYPE KR
INCH AND
See C161 for DVZ Rampa Inserts
SPAENAUR No.
130-T05-1T
130-T06-1K
RAMPA-ALLEN KEYS TYPE KR
Hex A/F (SW) Length PKG QTY.
4 mm 66 mm 5
5 mm 76 mm 5
SPAENAUR No.
876-F35-1M876-F37-1A876-F36-1X876-F33-1K876-F34-1W
*876-F26-1P876-F27-1Y876-F28-1C876-F29-1N876-F30-1C876-F31-1N876-F32-1TƔ876-F43-1NƔ876-F44-1T
RAMPA-DRIVER TYPE 515
Thread Size PKG QTY.
1/4-20 13/8-16 15/16-18 18-32 110-24 1M4 1M5 1M6 1M8 1M10 1M12 1M16 1M5 (Used with DVZ 625-B04-1M only) 1M6 (Used with DVZ 625-B05-1X only) 1
22 FEB 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
METRIC
METRIC
Outils d'installation de type KR / 515
NEW
NEW
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CATA
LOG
14
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C181
Pre-Bore Reference Guidelines
1 2 3 4 5 6
Material Categories Soft-, Plywoods,
Chipboard
Hardwoods,
MDF Boards
Soft-, Plywoods,
Chipboard
Hardwoods,
MDF Boards
Soft-, Plywoods,
Chipboard
Hardwoods,
MDF Boards
RAMPA Inserts Type A, B, C, BL, BV,
CV, TS
A, B, C, BL, BV,
CV, TS
B stainless steel B stainless steel CA, D, SK, SKD,
SKL, SRD
CA, D, SK,
SKD, SKL, SRD
RAMPA Inserts Material Brass, Steel Brass, Steel 1.4104 / 1.4305
(ASTM A 314-08 /AISI 303)
1.4104 / 1.4305
(ASTM A 314-08 /AISI 303)
Brass, Steel Brass, Steel
External-Ø Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
5 — — — — — — — — — — — —
5.5 4.1- 4.4 4.4- 4.7
6 4.6 - 4.9 4.9 - 5.2 — — — — — — — —
6.5 5.3 - 5.6 5.6 - 5.8 — — — — — — — —
8 5.7 - 6.1 6.1 - 6.6 6.2 - 6.6 6.6 - 7.1 6.6 - 6.9 6.9 - 7.2
8.5 6.2-6.6 6.6- 7.1 — — — — — — — —
9 6.7 - 7.1 7.1 - 7.6 — — — — — — — —
9.3 7.2 - 7.6 7.6 - 8.1 — — — — — — — —
9.7 — — — — — — — — — — — —
10 7.6 - 8.0 8.0 - 8.5 7.6 - 8.0 8.0 - 8.5 8.4 - 8.9 8.7 - 9.2
10.5 8.1- 8.5 8.5- 9
11.5 — — — — — — — — — — — —
12 9.4 - 9.9 9.9 - 10.4 9.4 - 9.9 10.4 - 10.9 10.0 - 10.4 10.2 - 10.8
12.5 10.1-10.5 10.5-11 — — — — — — — —
13 10.4 - 10.9 10.0 - 11.4 — — — — 11.0 - 11.4 11.2 - 11.8
14 11.4 - 11.9 11.9 - 12.4 11.9 - 12.4 12.4 - 12.9 12.0 - 12.4 12.2 - 12.8
14.5 — — — — — — — — — — — —
14.7 — — — — — — — — — — — —
16 12.6 - 13.3 13.3 - 14.0 14.1 - 14.8 14.5 - 15.0 14.0 - 14.5 14.2 - 14.9
18 — — — — — — — — — — — —
18.5 15.1 - 15.8 15.8 - 16.5 — — — — 16.2 - 16.7 16.7 - 17.2
20 — — — — — — — — — — — —
22 18.3 - 19.0 19.0 - 19.8 19.3 - 20.0 20.0 - 20.8 19.5 - 20.0 20.0 - 20.5
25 21.3 - 22.0 22.0 - 22.8 22.3 - 23.0 23.0 - 23.8 22.5 - 23.0 23.0 - 23.5
26 — — — — — — — — — — — —
30 26.3 - 27.0 27.0 - 27.8 27.5 - 28.2 27.0 - 27.8 — — — —
RAMPA PRE-BORE REFERENCE GUIDELINES
PLEASE NOTE: These figures are guidelines only. We recommend to determine the exact measurements through a
process of trial and error. All dimensions in mm.
DIAMETER: The pilot hole depends on the external diameter of the RAMPA insert and the density of the material. The
harder the material, the larger the drill-hole diameter.
18 Jan 2018
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Guide de référence d'alésage
CATA
LOG
14
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog
CAT
ALO
G 1
4
C
P: 1-800-265-8772 F: 1-888-252-6380 www. .com
Metric
Métrique
C182
Pre-Bore Reference Guidelines
7 8 9 10 11 12
Soft-, Plywoods,
Chipboard
Soft-, Plywoods,
Chipboard
a) Soft plastics, Hardwoods
b) Light metal alloys
1) < 180 N/mm²
2) 180 - 250 N/mm²
a) Medium hard plastics
b) Light metal alloys
250 - 300 N/mm²
a) Hard plastics
b) Light metal alloys
300 - 350 N/mm²
Light metal alloys >350 N/mm²,
Brass, Bronze, Wrought-iron,
Non-ferrous metals
SKDZ/ DVZ SKDK a) E/ES/BAN/BAV
b1/b2) ES/BAN/BAV
a) E/ES/BAN/BAV
b) ES/BAN/BAV
a) E/ES/BAN/BAV
b) ES/BAN/BAV
ES/BAN/BAV
Die cast Steel a/b1) Brass / Steel
b2) Steel hardened
a/b) Brass / Steel
b) Steel hardened
a/b) Brass / Steel
b) Steel hardened
Steel hardened
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
Drill-Ø in mm
from - to
— — — — 4.6 - 4.6 4.6 - 4.7 4.7 - 4.7 4.7 - 4.8
— — — — 5.3 - 5.4 5.4 - 5.5 5.5 - 5.6 5.6 - 5.7
— — — — 5.8 - 5.9 5.9 - 6.0 6.0 - 6.1 6.1 - 6.2
— — — — 7.1 - 7.2 7.2 - 7.4 7.4 - 7.5 7.5 - 7.6
5.7 - 6.0 — — — — — — — — — —
— — — — 8.1 - 8.2 8.2 - 8.4 8.4 - 8.5 8.5 - 8.6
— — — — — — — — — — — —
— — 8.0 - 8.2 — — — — — — — —
— — — — 8.6 - 8.8 8.8 - 9.0 9.0 - 9.2 9.2 - 9.4
7.7 - 8.0 — — — — — — — — — —
— — 10.0 - 10.2 10.6 - 10.8 10.8 - 11.0 11.0 - 11.2 11.2 - 11.4
8.7 - 9.0 — — — — — — — — — —
— — — — — — — — — — — —
— — — — 12.6 - 12.8 12.8 - 13.0 13.0 - 13.2 13.2 - 13.4
10.7 - 11.0 — — — — — — — — — —
— — 12.4 - 12.6 — — — — — — — —
12.2 - 12.5 — — 14.6 - 14.8 14.8 - 15.0 15.0 - 15.2 15.2 - 15.4
— — — — 16.6 - 16.8 16.8 - 17.0 17.0 - 17.2 17.2 - 17.4
— — — — — — — — — — — —
— — — — 18.6 - 18.8 18.8 - 19.0 19.0 - 19.2 19.2 - 19.4
— — — — — — — — — — — —
— — — — — — — — — — — —
— — — — 24.8 - 25.0 24.8 - 25.0 25.0 - 25.2 25.0 - 25.2
— — — — 28.8 - 29.0 28.8 - 29.0 29.0 - 29.2 29.0 - 29.2
PLEASE NOTE: These figures are guidelines only. We recommend to determine the exact measurements through a
process of trial and error. All dimensions in mm.
DIAMETER: The pilot hole depends on the external diameter of the RAMPA insert and the density of the material. The
harder the material, the larger the drill-hole diameter.
RAMPA PRE-BORE REFERENCE GUIDELINES continued
RAMPA® is a registered trademark ofHANS BRÜGMANN GmbH & Co., Germany
Guide de référence d'alésage
CAT
ALO
G 1
4
© 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog.
© 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.
1-800-265-8772 [email protected] Spaenaur Home Contact Us FrançaisFull Spaenaur Catalog