U S E R G U I D E

N A T U R E ’ S P R E S C R I P T I O N

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, LLCLLC

LLC

LLC

2 3

IMPORTANT SAFEGUARDS AND CAUTIONARY INFORMATION

SAVE THESE INSTRUCTIONSFOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS

BEFORE OPERATING YOUR NUTRIBULLET Rx.

MEDICAL WARNING!• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY CHOLESTEROL-LOWERING

MEDICATION, BLOOD THINNERS, BLOOD PRESSURE DRUGS, TRANQUILIZERS, OR ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR DOCTOR BEFORE CONSUMING ANY OF THE NUTRIBLAST Rx RECIPES.

• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN CHEMICALS THAT RELEASE CYANIDE INTO THE BODY WHEN INGESTED. DO NOT USE THE FOLLOWING SEEDS AND PITS IN THE NUTRIBULLET Rx: APPLE SEEDS, APRICOT PITS, CHERRY PITS, PLUM PITS, PEACH PITS.

ELECTRICAL SAFETYWhen using any electrical appliance, basic safety precautions should always be observed, including the following:

• CAUTION! TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG, OR POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.

• DO NOT USE THIS PRODUCT WITH ANY TYPE OF ADAPTOR OR VOLTAGE CONVERTER DEVICE.

• THE USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT RECOMMENDED OR SOLD BY MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY AND VOID THE WARRANTY.

• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED MODIFICATION OF THE PRODUCT AND AS SUCH WILL VOID THE WARRANTY. USE OF THIS PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO THE PRODUCT.

• UNPLUG THE NUTRIBULLET Rx AND DEPRESS POWER BUTTON WHEN IT IS NOT IN USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL PARTS, OR CLEANING.

• This appliance has important markings on the plug blade. The attachment plug or entire cord set is not suitable for replacement. If damaged, the appliance shall be replaced.

• Do not pull, twist, or damage the power cord.• Do not allow the cord to hang over the side of the counter or table.

• Do not allow cord to touch hot surfaces, including stove.• Periodically inspect cord and plug for damage. Do not operate any appliance with

a damaged cord or plug. If the appliance malfunctions or is dropped or damaged in any manner, discontinue use. Contact Customer Service for assistance in obtaining a replacement.

• Do not remove the rubber liner inside the power base. To clean, unplug first, then wipe with a sponge moistened with warm water.

• THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.

• IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.

• DEPRESS POWER BUTTON TO SWITCH OFF THE APPLIANCE AFTER EACH USE. DISCONNECT FROM POWER SOURCE BEFORE CHANGING ACCESSORIES OR APPROACHING PARTS THAT MOVE IN USE.

• WARNING! POTENTIAL OF PERSONAL INJURY FROM MISUSE. TAKE CARE WHEN HANDLING THE SHARP CUTTING BLADES, EMPTYING THE SOUP PITCHER AND DURING CLEANING.

• THIS APPLIANCE IS NOT A TOY! CHILDREN SHOULD NOT PLAY WITH, CLEAN, OR ATTEMPT MAINTENANCE ON THE UNIT WITHOUT PROPER ADULT SUPERVISION.

WARNING: VENTILATION CAUTION • Always operate the NUTRIBULLET on level surface, leaving unobstructed

space beneath and around the power base to permit proper air circulation. Slots and openings on the bottom of the product are provided for ventilation to ensure reliable motor operation and to prevent over-heating. Warning: To prevent fire hazard, power base openings should be free of dust or lint and never obstructed with flammable materials such as newspapers, tablecloths, napkins, dishtowels, or place mats.

NUTRIBULL

ET,

NUTRIBULL

ET,

UTION! TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD,

NUTRIBULL

ET,

UTION! TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG, OR POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.

NUTRIBULL

ET,

PLUG, OR POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.OT USE THIS PRODUCT WITH ANY TYPE OF ADAPTOR OR VOLTAGE

NUTRIBULL

ET,

OT USE THIS PRODUCT WITH ANY TYPE OF ADAPTOR OR VOLTAGE

E USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT RECOMMENDED

NUTRIBULL

ET,

E USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT RECOMMENDED OR SOLD BY MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY

NUTRIBULL

ET,

OR SOLD BY MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY

E OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED

NUTRIBULL

ET,

E OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED MODIFICATION OF THE PRODUCT AND AS SUCH WILL VOID THE WARRANTY.

NUTRIBULL

ET,

MODIFICATION OF THE PRODUCT AND AS SUCH WILL VOID THE WARRANTY. USE OF THIS PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL

NUTRIBULL

ET,

USE OF THIS PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO THE PRODUCT.NUTRIB

ULLET,

SPECIFICATIONS MAY RESULT IN DAMAGE TO THE PRODUCT.x AND DEPRESS POWER BUTTON WHEN IT IS NOT NUTRIB

ULLET,

x AND DEPRESS POWER BUTTON WHEN IT IS NOT IN USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE ASSEMBLING, NUTRIB

ULLET,

IN USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE ASSEMBLING,

AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR

NUTRIBULL

ET, AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE

NUTRIBULL

ET, INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.

NUTRIBULL

ET, WAY AND UNDERSTAND THE HAZARDS INVOLVED. •

NUTRIBULL

ET, • IF T

NUTRIBULL

ET, IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED

NUTRIBULL

ET, HE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED

BY THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY

NUTRIBULL

ET, BY THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.

NUTRIBULL

ET, QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.

•

NUTRIBULL

ET, • DE

NUTRIBULL

ET, DEPRESS POWER BUTTON TO SWITCH OFF THE APPLIANCE

NUTRIBULL

ET, PRESS POWER BUTTON TO SWITCH OFF THE APPLIANCE

AFTER EACH USE. DISCONNECT FROM POWER SOURCE BEFORE

NUTRIBULL

ET, AFTER EACH USE. DISCONNECT FROM POWER SOURCE BEFORE

NUTRIBULL

ET, LLC

wipe with a sponge moistened with warm water.

LLC

wipe with a sponge moistened with warm water.

THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8

LLCTHIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8

YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL,

LLCYEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL,

SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE LLC

SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR LL

CAND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE LL

CINSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE LL

C

4 5

EXTRACTION SAFETY PRECAUTIONSThe NUTRIBULLET Rx has two modes, NutriBlast Rx Mode (traditional Blast mode) and Souperblast Mode (Soup making mode) which are further explained in the “How It Works” section of this manual. Carefully read and follow all the safety precautions, particularly when operating the NUTRIBULLET Rx in SouperBlast mode.

NEVER LEAVE THE NUTRIBULLET Rx UNATTENDED WHILE IN USE!

CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED BY OR NEAR CHILDREN.

NEVER USE THE EXTRACTOR BLADE TO BLEND WITHOUT LIQUID AS DOING SO MAY DAMAGE

THE BLADE.

• NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING BLADE AND NEVER USE YOUR HANDS OR UTENSILS TO PRESS THE ACTIVATOR BUTTONS DOWN WHILE THE NUTRIBULLET Rx IS PLUGGED IN.

• BLADES ARE SHARP! HANDLE CAREFULLY. USE CARE WHILE HANDLING THE BLADES NOT TO TOUCH THE BLADE EDGES TO AVOID INJURY.

• CHECK GASKET TO MAKE SURE IT IS COMPLETELY SEATED IN THE CROSS BLADE UNIT BEFORE EACH USE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE IF GASKET IS NOT COMPLETELY SEATED.

• WE RECOMMEND REPLACING YOUR EXTRACTOR BLADE EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT BLADE, SIMPLY VISIT: WWW.NUTRILIVING.COM

• THE NUTRIBULLET Rx IS NOT INTENDED FOR USE IN MICROWAVE OVENS. DO NOT PLACE THE NUTRIBULLET Rx CUPS, POWER BASE OR ANY NUTRIBULLET ACCESSORY IN A MICROWAVE OVEN AS THIS MAY RESULT IN DAMAGE TO THE APPLIANCE. TO REHEAT SOUPS AFTER BLENDING, TRANSFER TO A MICROWAVE SAFE CONTAINER OR TO A STOVE-TOP POT PRIOR TO HEATING.

• NEVER MICROWAVE UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS MAY EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN POSSIBLE INJURY OR PROPERTY DAMAGE.

• NEVER BLEND CARBONATED BEVERAGES. BUILT-UP PRESSURE FROM RELEASED GASES CAN CAUSE CONTAINER TO BURST, RESULTING IN POSSIBLE INJURY.

• DO NOT PUT HOT LIQUIDS IN ANY OF THE BLENDING VESSELS BEFORE BLENDING. START WITH COOL OR ROOM TEMPERATURE INGREDIENTS. (21ºC/70ºF OR LESS) SOUP WILL HEAT DURING THE EXTRACTION PROCESS TO ~65ºC/150ºF.

• DO NOT RUN THE NUTRIBULLET Rx WITH EMPTY NUTRIBULLET Rx CUPS OR SOUPBLAST PITCHER AS THIS CAN DAMAGE THE UNIT.• AFTER BLENDING INGREDIENTS, REMOVE THE BLADE ASSEMBLY—ALLOW THE

VESSEL WITH IT’S CONTENTS TO SETTLE AND TO RELEASE ANY PRESSURE THAT MAY HAVE BUILT UP DURING THE EXTRACTION PROCESS. IF YOU WILL NOT CONSUME IT IMMEDIATELY, USE THE STAY FRESH LID TO CLOSE THE CONTAINER. UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY IF STORING LONGER THAN A FEW HOURS TO RELEASE ANY ADDED PRESSURE THAT MAY HAVE BUILT UP DUE TO FERMENTATION.

• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A CUP SEALED WITH A BLADE BASE WITHOUT FIRST RELEASING THE PRESSURE.

• DO NOT ALLOW NUTRIBLASTS OR SOUPERBLASTS TO SIT FOR LONG PERIODS IN A SEALED CONTAINER BY UNSCREWING THE LID AND OPENING THE CUP FOR A FEW MOMENTS. THE SUGARS IN THE FRUIT AND VEGETABLES CAN FERMENT, CAUSING PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL WHICH CAN CAUSE INGREDIENTS TO BURST AND SPRAY OUT WHEN MOVED OR OPENED.

• RELEASE PRESSURE BY CAREFULLY UNSCREWING THE LID AND OPENING THE CUP FOR A FEW MOMENTS.

• Avoid contact with moving parts.• TO REDUCE THE RISK OF INJURY, NEVER PLACE CUTTER-ASSEMBLY BLADES

ON BASE WITHOUT JAR PROPERLY ATTACHED.• NEVER PUT THE EXTRACTOR BLADE ON THE POWER BASE WITHOUT BEING

SECURELY ASSEMBLED ONTO CUP FIRST.• Always operate blender with cover in place.• Keep hands and utensils away from the cutting blade while chopping or blending

food to reduce the risk of severe personal injury or damage to the device. A scraper may be used, but only when the blender/food chopper is not running.

• Do not use the cross blade for grinding dry materials such as grains, cereal, or coffee. • To reduce the risk of injury, make sure the blade base is securely screwed onto the cup before placing it on the Power Base and operating the appliance.• Do not use NUTRIBULLET Rx outdoors.• DO NOT BLEND HOT LIQUIDS.

NUTRIBULL

ET,

NUTRIBULL

ET,

ECOMMEND REPLACING YOUR EXTRACTOR BLADE EVERY 6 MONTHS OR

NUTRIBULL

ET,

ECOMMEND REPLACING YOUR EXTRACTOR BLADE EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT BLADE,

NUTRIBULL

ET,

AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT BLADE,

x IS NOT INTENDED FOR USE IN MICROWAVE OVENS. DO

NUTRIBULL

ET,

x IS NOT INTENDED FOR USE IN MICROWAVE OVENS. DO NOT PLACE THE NUTRIBULLET Rx CUPS, POWER BASE OR ANY NUTRIBULLET

NUTRIBULL

ET,

NOT PLACE THE NUTRIBULLET Rx CUPS, POWER BASE OR ANY NUTRIBULLET ACCESSORY IN A MICROWAVE OVEN AS THIS MAY RESULT IN DAMAGE TO

NUTRIBULL

ET,

ACCESSORY IN A MICROWAVE OVEN AS THIS MAY RESULT IN DAMAGE TO THE APPLIANCE. TO REHEAT SOUPS AFTER BLENDING, TRANSFER TO A

NUTRIBULL

ET,

THE APPLIANCE. TO REHEAT SOUPS AFTER BLENDING, TRANSFER TO A MICROWAVE SAFE CONTAINER OR TO A STOVE-TOP POT PRIOR TO HEATING.

NUTRIBULL

ET,

MICROWAVE SAFE CONTAINER OR TO A STOVE-TOP POT PRIOR TO HEATING.• NEVER MICROWAVE UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS NUTRIB

ULLET,

• NEVER MICROWAVE UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS Y EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN POSSIBLE NUTRIB

ULLET,

Y EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN POSSIBLE NUTRIBULL

ET, THE CONTAINER. UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY

NUTRIBULL

ET, THE CONTAINER. UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY IF STORING LONGER THAN A FEW HOURS TO RELEASE ANY ADDED PRESSURE

NUTRIBULL

ET, IF STORING LONGER THAN A FEW HOURS TO RELEASE ANY ADDED PRESSURE THAT MAY HAVE BUILT UP DUE TO FERMENTATION.

NUTRIBULL

ET, THAT MAY HAVE BUILT UP DUE TO FERMENTATION.NE

NUTRIBULL

ET, NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A CUP SEALED WITH A

NUTRIBULL

ET, VER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A CUP SEALED WITH A BLADE BASE WITHOUT FIRST RELEASING THE PRESSURE.

NUTRIBULL

ET, BLADE BASE WITHOUT FIRST RELEASING THE PRESSURE.

•

NUTRIBULL

ET, • DO N

NUTRIBULL

ET, DO NOT ALLOW NUTRIBLASTS OR SOUPERBLASTS TO SIT FOR LONG PERIODS

NUTRIBULL

ET, OT ALLOW NUTRIBLASTS OR SOUPERBLASTS TO SIT FOR LONG PERIODS

IN A SEALED CONTAINER BY UNSCREWING THE LID AND OPENING THE CUP FOR

NUTRIBULL

ET, IN A SEALED CONTAINER BY UNSCREWING THE LID AND OPENING THE CUP FOR A FEW MOMENTS. THE SUGARS IN THE FRUIT AND VEGETABLES CAN FERMENT,

NUTRIBULL

ET, A FEW MOMENTS. THE SUGARS IN THE FRUIT AND VEGETABLES CAN FERMENT, CAUSING PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL WHICH CAN

NUTRIBULL

ET, CAUSING PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL WHICH CAN CAUSE INGREDIENTS TO BURST AND SPRAY OUT WHEN MOVED OR OPENED.

NUTRIBULL

ET, CAUSE INGREDIENTS TO BURST AND SPRAY OUT WHEN MOVED OR OPENED.

LLC

• DO NOT RUN THE NUTRIBULLET Rx

LLC

• DO NOT RUN THE NUTRIBULLET RxUPBLAST PITCHER AS THIS CAN DAMAGE THE UNIT.

LLCUPBLAST PITCHER AS THIS CAN DAMAGE THE UNIT.

TER BLENDING INGREDIENTS, REMOVE THE BLADE ASSEMBLY—ALLOW THE

LLCTER BLENDING INGREDIENTS, REMOVE THE BLADE ASSEMBLY—ALLOW THE

VESSEL WITH IT’S CONTENTS TO SETTLE AND TO RELEASE ANY PRESSURE

LLCVESSEL WITH IT’S CONTENTS TO SETTLE AND TO RELEASE ANY PRESSURE

THAT MAY HAVE BUILT UP DURING THE EXTRACTION PROCESS. IF YOU WILL

LLCTHAT MAY HAVE BUILT UP DURING THE EXTRACTION PROCESS. IF YOU WILL

NOT CONSUME IT IMMEDIATELY, USE THE STAY FRESH LID TO CLOSE LLC

NOT CONSUME IT IMMEDIATELY, USE THE STAY FRESH LID TO CLOSE THE CONTAINER. UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY LL

CTHE CONTAINER. UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY IF STORING LONGER THAN A FEW HOURS TO RELEASE ANY ADDED PRESSURE LL

CIF STORING LONGER THAN A FEW HOURS TO RELEASE ANY ADDED PRESSURE

6 7

SAFETY WARNINGS FOR EXTRACTING FOR NUTRIBLASTS

• NUTRIBULLET Rx IS PROGRAMMED TO RUN FOR 1 MINUTE DURING NUTRIBLAST MODE (G BUTTON WILL BE GREEN).

• IF POWER BASE DOES NOT SHUT OFF AFTER 1 MINUTE DURING NUTRIBLAST CYCLE, STOP IT MANUALLY BY DEPRESSING THE POWER BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR SIMPLY LIFT CUP OFF POWER BASE.

• TO TURN OFF THE MACHINE AT ANYTIME DURING THE NUTRIBLAST CYCLE (G BUTTON WILL BE GREEN), DEPRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR SIMPLY LIFT THE CUP OFF THE POWER BASE. IF YOU PRESS THE G BUTTON FOR 2 SECONDS DURING EXTRACTION AND THE LIGHT TURNS RED, YOU ARE IN SOUPERBLASTER MODE. DEPRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON AND SIMPLY LIFT THE CUP OFF THE POWER BASE TO TURN OFF THE UNIT. THE LIGHT WILL STOP GLOWING, SIGNIFYING POWER IS OFF. ALWAYS UNPLUG THE POWER BASE UPON COMPLETION OF PROCESSING.

• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER NUTRIBLAST MODE! THE COUPLING GEAR IN BLADE BASE AND POWER BASE WILL BE HOT!

• DO NOT RUN IN NUTRIBLAST MODE FOR MORE THAN 1 INTERVAL. • AFTER INITIAL CYCLE, ALLOW POWER BASE TO SHUT OFF COMPLETELY AND

WAIT FOR 15 SECONDS BEFORE STARTING ANOTHER CYCLE.• DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS WITHOUT

ALLOWING POWER BASE TO COOL TO PREVENT OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3 MINUTES AFTER THE 3RD EXTRACTION CYCLE.

• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT SHUTS OFF THE POWER BASE IF THE UNIT OVERHEATS.

• IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE AND PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT OF THE G-BUTTON AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

• WHEN MAKING NUT BUTTERS OR OIL-BASED FOODS, DUE TO THE CONSISTENCY, THE FOOD WILL PROCESS AND THEN STICK TO THE SIDES OF THE CUP. PROCESS IN 30 SECOND INCREMENTS ONLY BY SIMPLY LIFTING THE CUP OFF THE POWER BASE BETWEEN INTERVALS. BETWEEN CYCLES, USE A COMBINATION OF THE TAP METHOD DESCRIBED ON PAGE 19 AND OPEN CUP AS NEEDED TO SCRAPE DOWN THE INGREDIENTS TO THE CENTER OF THE CUP BEFORE CONTINUING TO PROCESS IN 30 SECOND INCREMENTS.

• ALLOW MACHINE TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO PREVENT OVERHEATING AND DAMAGING THE UNIT.

• To prevent leakage, always align and hand-tighten or use blade remover to tighten the blade to the NutriBlast Rx cup prior to inverting it and placing the assembly on to the motor base.

• TO TURN ON THE NUTRIBULLET: Plug the power base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-button. This will cause the power button glow BLUE. Next, place the cup blade-side-down onto the power base. This will activate the NutriBullet Rx’s SMART Technology function, causing the G-Button at the front of the unit to glow GREEN.

• Once activated, the unit will run for 1 minute in regular NutriBlast Rx mode before it automatically turns off. The G-button will stop glowing green at the end of the 1-minute cycle. To turn off completely before the cycle is complete, either lift the cup off of the base, or press the power button, located 90˚ to the left side of the G-button. The power button will extend from its recessed position and the blue light will no longer be lit, signifying the power is off.

• In NutriBlast Rx Mode, the motor will run 2 cycles during the 1 minute interval— first it will slow down half way through the 1 minute interval to allow the ingredients to settle for improved processing, then it will power-up again for the second half of the interval. This is a normal function of the NutriBullet Rx.

• Turn the NUTRIBULLET Rx off after each use. Depress the power button, located 90˚ to the left side of the G-button. The BLUE light will stop glowing, signifying power is off.

POWER OFF INSTRUCTIONS• To turn off the machine at anytime during the NutriBlast cycle (indicated by the

GREEN glowing G-button), depress the power button, located 90˚ to the left side of the G-button and simply lift the cup off power base. When the vessel is removed from the power base, only the GREEN G-button light will turn off. When the power off button is pressed, the BLUE light will turn off and the blade will stop spinning. To turn off machine at any time during SouperBlast Mode (indicated by the RED glowing G button), press the power off button, located 90˚ to the left side of the G-button and simply lift the SouperBlast Pitcher off the power base. When the vessel is removed from the power base, only the RED G-button light will turn off. When the power off button is pressed, the BLUE light will turn off and the blade will stop spinning. Always press the power off button when machine is not in use. NUTRIB

ULLET,

NUTRIBULL

ET,

OT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS WITHOUT

NUTRIBULL

ET,

OT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS WITHOUT ALLOWING POWER BASE TO COOL TO PREVENT OVERHEATING AND ALLOW

NUTRIBULL

ET,

ALLOWING POWER BASE TO COOL TO PREVENT OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3 MINUTES AFTER THE 3RD EXTRACTION CYCLE.

NUTRIBULL

ET,

INGREDIENTS TO SETTLE FOR 2-3 MINUTES AFTER THE 3RD EXTRACTION CYCLE. WER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT

NUTRIBULL

ET,

WER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT

HE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER

NUTRIBULL

ET,

HE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE AND PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT OF THE

NUTRIBULL

ET,

BASE AND PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT OF THE G-BUTTON AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING

NUTRIBULL

ET,

G-BUTTON AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF

NUTRIBULL

ET,

TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

NUTRIBULL

ET,

AND THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.• WHEN MAKING NUT BUTTERS OR OIL-BASED FOODS, DUE TO THE

NUTRIBULL

ET,

• WHEN MAKING NUT BUTTERS OR OIL-BASED FOODS, DUE TO THE CONSISTENCY, THE FOOD WILL PROCESS AND THEN STICK TO THE SIDES OF NUTRIB

ULLET,

CONSISTENCY, THE FOOD WILL PROCESS AND THEN STICK TO THE SIDES OF THE CUP. PROCESS IN 30 SECOND INCREMENTS ONLY BY SIMPLY LIFTING THE NUTRIB

ULLET,

THE CUP. PROCESS IN 30 SECOND INCREMENTS ONLY BY SIMPLY LIFTING THE CUP OFF THE POWER BASE BETWEEN INTERVALS. BETWEEN CYCLES, USE A NUTRIB

ULLET,

CUP OFF THE POWER BASE BETWEEN INTERVALS. BETWEEN CYCLES, USE A COMBINATION OF THE TAP METHOD DESCRIBED ON PAGE 19 AND OPEN CUP NUTRIB

ULLET,

COMBINATION OF THE TAP METHOD DESCRIBED ON PAGE 19 AND OPEN CUP

base, or press the power button, located 90˚ to the left side of the G-button. The

NUTRIBULL

ET, base, or press the power button, located 90˚ to the left side of the G-button. The power button will extend from its recessed position and the blue light will no longer be

NUTRIBULL

ET, power button will extend from its recessed position and the blue light will no longer be lit, signifying the power is off.

NUTRIBULL

ET, lit, signifying the power is off.• In

NUTRIBULL

ET, • In NutriBlast Rx

NUTRIBULL

ET, NutriBlast Rx Mode, the motor will run 2 cycles during the 1 minute interval— first

NUTRIBULL

ET, Mode, the motor will run 2 cycles during the 1 minute interval— first

it will slow down half way through the 1 minute interval to allow the ingredients to

NUTRIBULL

ET, it will slow down half way through the 1 minute interval to allow the ingredients to settle for improved processing, then it will power-up again for the second half of the

NUTRIBULL

ET, settle for improved processing, then it will power-up again for the second half of the interval. This is a normal function of the

NUTRIBULL

ET, interval. This is a normal function of the

• Turn the NUTRIBULLET Rx off after each use. Depress the power button, located

NUTRIBULL

ET, • Turn the NUTRIBULLET Rx off after each use. Depress the power button, located

90˚ to the left side of the G-button. The

NUTRIBULL

ET, 90˚ to the left side of the G-button. The

LLC

Press the power button, located 90˚ to the left side of the G-button. This will cause

LLC

Press the power button, located 90˚ to the left side of the G-button. This will cause BLUE

LLC

BLUE. Next, place the cup blade-side-down onto the power

LLC

. Next, place the cup blade-side-down onto the power base. This will activate the

LLCbase. This will activate the NutriBullet Rx’s

LLCNutriBullet Rx’s

G-Button at the front of the unit to glow

LLCG-Button at the front of the unit to glow

e activated, the unit will run for 1 minute in regular

LLCe activated, the unit will run for 1 minute in regular

automatically turns off. The G-button will stop glowing green at the end of the 1-minute LLC

automatically turns off. The G-button will stop glowing green at the end of the 1-minute cycle. To turn off completely before the cycle is complete, either lift the cup off of the LL

Ccycle. To turn off completely before the cycle is complete, either lift the cup off of the base, or press the power button, located 90˚ to the left side of the G-button. The LL

Cbase, or press the power button, located 90˚ to the left side of the G-button. The power button will extend from its recessed position and the blue light will no longer be LL

Cpower button will extend from its recessed position and the blue light will no longer be

8 9

SAFETY WARNINGS FOR EXTRACTING FOR SOUPS

• WARNING!: ONLY USE THE VENTED SOUPERBLAST PITCHER AND TWO-PIECE LID WHILE OPERATING THE NUTRIBULLET Rx IN SOUPERBLAST MODE. THE SOUPERBLAST PITCHER IS SPECIALLY VENTED TO RELEASE PRESSURE AS THE SOUP MIXTURE HEATS. OTHER VESSELS ARE UNVENTED AND MAY RUPTURE AND CAUSE PERSONAL INJURY IF MISUSED IN SOUPERBLAST MODE.

• TO PREVENT OVERHEATING: DO NOT REPEAT SOUPERBLAST MODE FOR THE SAME HOT SOUP. IF MORE HEAT IS REQUIRED, PLACE THE CONTENTS IN A MICROWAVE-SAFE CONTAINER AND CONTINUE HEATING TO DESIRED TEMPERATURE. TO MAKE A NEW SOUP, EMPTY OLD CONTENTS, ADD NEW INGREDIENTS AND WAIT 1 FULL MINUTE BEFORE RETURNING THE VESSEL TO THE POWER BASE TO START A NEW SMART TECHNOLOGY CYCLE. DO NOT REPEAT MORE THAN 2 CYCLES IN SOUPERBLAST MODE RESTING 1 MINUTE BETWEEN CYCLES.

• DO NOT RUN THE NUTRIBULLET IN SOUPERBLAST MODE FOR MORE THAN 2 CYCLES CONSECUTIVELY WITHOUT ALLOWING THE NUTRIBULLET POWER BASE AND SOUPERBLAST ACCESSORIES COOL OFF FOR 30-60 MIN. TO PREVENT OVERHEATING AND ALLOW INGREDIENTS TO SETTLE BEFORE CONTINUING TO BLEND.

• IF POWER BASE DOES NOT SHUT OFF AFTER ONE (1) 7-MINUTE INTERVAL DURING SOUPERBLAST MODE, DEPRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR SIMPLY LIFT THE SOUPERBLAST PITCHER OFF OF THE POWER BASE.

• ALLOW POWERBASE TO SHUT OFF COMPLETELY AFTER INITIAL INTERVAL AND WAIT FOR 3-4 MINUTES BETWEEN INTERVALS.

• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT SHUTS OFF THE POWER BASE WHEN THE UNIT OVERHEATS. IF THE POWERBASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE OR PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT OF THE G-BUTTON AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

HEAT CAUTION!• DURING SOUPERBLAST MODE, THE CONTENTS INSIDE CAN REACH UP TO

ABOUT 70ºC / 150ºF THROUGH THE FRICTION OF THE ROTATING BLADE.• KEEP HANDS AND OTHER EXPOSED SKIN AWAY FROM THE LID OPENING TO

PREVENT POSSIBLE BURNS DURING SOUPERBLAST MODE.• DO NOT REMOVE THE LID DURING PROCESSING OF SOUP—INGREDIENTS WILL

BECOME HOT AND MAY SPLASH OUT AND CAUSE INJURY.• DO NOT TOUCH SOUPERBLAST PITCHER DIRECTLY WITH HANDS AFTER

SOUPERBLAST MODE! THE SOUPERBLAST PITCHER SURFACE, BLADES AND COUPLING GEAR WILL BE HOT!

• ALWAYS USE APPROPRIATE HEAT RESISTANT PADS ON THE HANDLE TO HOLD THE SOUPERBLAST PITCHER AND TO SUPPORT THE BOTTOM OF THE CONTAINER.

• CAREFULLY OPEN SOUPERBLAST PITCHER LID AFTER SOUPERBLAST MODE, AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS.

• Always attach blade to SouperBlast Pitcher and hand tighten or use the blade remover to tighten the blade to prevent leakage prior to adding ingredients into the pitcher.

• NEVER USE THE EXTRACTOR BLADE TO BLEND WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLADE.

• Do not use the soup pitcher on the motor base without the black lid and clear vent top in place when running the NutriBullet Rx.

• TO TURN THE NUTRIBULLET ON IN SOUPERBLAST mode using SMART Technology, plug the power base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-button. The power button will glow BLUE, signifying the power is on. Next, place the cup blade-side-down onto the power base. This will activate the NutriBullet Rx’s SMART TECHNOLOGY function, causing the G-Button at the front of the unit to glow GREEN.

• Press the GREEN G-Button down for 2 seconds until it glows RED. This will indicate that SouperBlast mode has begun. The unit will run in SouperBlast mode for about 7 minutes before automatically turning off. Once off, simply lift the SouperBlast Pitcher off of the Power Base.

• The motor will run 3 cycles during the 7 minute program—it will slow down twice through the cycle to allow the ingredients to settle for improved processing then it will increase again for the next part of the cycle. This is a normal function of the NutriBullet Rx.

• The contents inside can reach up to about 70ºC / 150ºF through the friction of the rotating blade.• If you wish to process your soup for less than the programmed time, you may simply

lift off the SouperBlast Pitcher or press the power button, located 90˚ to the left side of the G-button.

• Always allow it to come to a complete stop prior to adding additional ingredients during the processing period.

• Always depress the power button when not in use. The BLUE light will stop glowing, signifying the power is off.

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

LOW POWERBASE TO SHUT OFF COMPLETELY AFTER INITIAL INTERVAL AND

NUTRIBULL

ET,

LOW POWERBASE TO SHUT OFF COMPLETELY AFTER INITIAL INTERVAL AND

WER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT

NUTRIBULL

ET,

WER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT SHUTS OFF THE POWER BASE WHEN THE UNIT OVERHEATS. IF THE POWERBASE

NUTRIBULL

ET,

SHUTS OFF THE POWER BASE WHEN THE UNIT OVERHEATS. IF THE POWERBASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE OR PRESS THE POWER

NUTRIBULL

ET,

OVERHEATS AND SHUTS OFF, UNPLUG THE POWER BASE OR PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT OF THE G-BUTTON AND LET IT COOL FOR

NUTRIBULL

ET,

BUTTON, LOCATED 90˚ TO THE LEFT OF THE G-BUTTON AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL

NUTRIBULL

ET,

AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS

NUTRIBULL

ET,

RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS

REFULLY OPEN SOUPERBLAST PITCHER LID AFTER SOUPERBLAST MODE,

NUTRIBULL

ET, REFULLY OPEN SOUPERBLAST PITCHER LID AFTER SOUPERBLAST MODE, AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS.

NUTRIBULL

ET, AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS.

•

NUTRIBULL

ET, • Always attach blade to

NUTRIBULL

ET, Always attach blade to tighten the blade to prevent leakage prior to adding ingredients into the pitcher.

NUTRIBULL

ET, tighten the blade to prevent leakage prior to adding ingredients into the pitcher.

•

NUTRIBULL

ET, • NEVER USE THE EXTRACTOR BLADE TO BLEND WITHOUT LIQUID AS DOING SO

NUTRIBULL

ET, NEVER USE THE EXTRACTOR BLADE TO BLEND WITHOUT LIQUID AS DOING SO M

NUTRIBULL

ET, MAY DAMAGE THE BLADE.

NUTRIBULL

ET, AY DAMAGE THE BLADE.

•

NUTRIBULL

ET, • Do n

NUTRIBULL

ET, Do not use the soup pitcher on the motor base without the black lid and clear vent top

NUTRIBULL

ET, ot use the soup pitcher on the motor base without the black lid and clear vent top

in place when running the

NUTRIBULL

ET, in place when running the

LLC

OT REMOVE THE LID DURING PROCESSING OF SOUP—INGREDIENTS WILL

LLC

OT REMOVE THE LID DURING PROCESSING OF SOUP—INGREDIENTS WILL BECOME HOT AND MAY SPLASH OUT AND CAUSE INJURY.

LLCBECOME HOT AND MAY SPLASH OUT AND CAUSE INJURY.

OT TOUCH SOUPERBLAST PITCHER DIRECTLY WITH HANDS AFTER

LLCOT TOUCH SOUPERBLAST PITCHER DIRECTLY WITH HANDS AFTER

SOUPERBLAST MODE! THE SOUPERBLAST PITCHER SURFACE, BLADES AND

LLCSOUPERBLAST MODE! THE SOUPERBLAST PITCHER SURFACE, BLADES AND

COUPLING GEAR WILL BE HOT!

LLCCOUPLING GEAR WILL BE HOT!

WAYS USE APPROPRIATE HEAT RESISTANT PADS ON THE HANDLE TO HOLD THE LLC

WAYS USE APPROPRIATE HEAT RESISTANT PADS ON THE HANDLE TO HOLD THE SOUPERBLAST PITCHER AND TO SUPPORT THE BOTTOM OF THE CONTAINER.LL

CSOUPERBLAST PITCHER AND TO SUPPORT THE BOTTOM OF THE CONTAINER.LL

CREFULLY OPEN SOUPERBLAST PITCHER LID AFTER SOUPERBLAST MODE, LL

CREFULLY OPEN SOUPERBLAST PITCHER LID AFTER SOUPERBLAST MODE,

AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS. LLC

AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS.

10

CLEANING SAFEGUARDS • AFTER MAKING A NUTRIBLAST OR SOUPERBLAST, THE BLADE MUST BE

CLEANED IMMEDIATELY.• ALWAYS UNPLUG POWER BASE AND DEPRESS THE POWER BUTTON PRIOR TO

CLEANING, ASSEMBLING OR DISASSBMBLING.• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY TO KEEP IT IN GOOD WORKING ORDER.

• DO NOT WASH THE BLADES IN THE DISHWASHER AS ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

• THE NUTRIBULLET Rx CUPS CAN BE WASHED IN THE DISHWASHER AND SHOULD BE WASHED ON THE TOP RACK OF THE DISHWASHER USING THE NORMAL (NOT SANITIZE) CYCLE.

• THE NUTRIBULLET Rx CUPS AND BLADES SHOULD NOT BE EMMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL WARP PLASTIC AND DAMAGE GASKETS.

• BLADES ARE SHARP! USE CARE WHEN CLEANING BLADES TO AVOID INJURY! RINSE BLADES IMMEDIATELY AFTER EACH USE TO PREVENT DEBRIS FROM DRYING AND STICKING TO BLADE COMPONENTS. IF NECESSARY, USE INCLUDED BRUSH TO LOOSEN ANY DEBRIS AROUND BLADES, GASKETS AND BLADE HOUSING THREADS WITH CARE.

• HANDWASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT). • DRY IMMEDIATELY.• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD

SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE BASE AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.

• WHEN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE GASKET RING. SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME A GASKET BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A REPLACEMENT NUTRIBULLET Rx BLADE HOLDER AT: 1-844-696-2791.

STUBBORN CLEANUP• If ingredients dry inside the NutriBullet Rx Cups or SouperBlast Pitcher, make

your cleanup a snap by filling the cup about 2/3 full with warm soapy water and screw on the Extractor Blade and if using the SouperBlast Pitcher, put on lids. Place the cup assembly on the NutriBullet Rx Power Base for about 20-30 seconds. That will loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all done.

CLEANING THE NUTRIBULLET Rx POWER BASE

For the most part the Power Base doesn’t really get dirty, but if you neglect to twist the blade on to the cup tightly, liquids can leak out and get into the base and activator buttons. Here’s how to clean it up. Step 1: The most important thing is to UNPLUG the Power Base before cleaning! Step 2: Use a damp rag to wipe down the inside and outside of the Power Base. • NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. • Never put your hands or utensils near the moving blade and never use your hands

or utensils to press the activator buttons down while the Power Base is plugged in.HEAVY CLEANING:

• Should the inside of the base become sticky due to spillage you may follow these additional cleaning instructions:

• UNPLUG the Power Base and depress the power button BEFORE cleaning.• Place the Power Base on a dish towel to catch any liquid or debris.• Pour a scant 1/8 cup of a dilute solution of distilled vinegar and warm (not hot)

water (1 part vinegar to 2 parts water) in to the Power Base where the blade assembly would sit during normal use.

• Immediately use a dish brush to dislodge any debris and wipe it out with a damp cloth.• The Power Base is constructed with a drain tube to drain any liquid debris safely

through to the dish towel without damaging the inside components.

SAVE THESE INSTRUCTIONSFOR HOUSEHOLD USE ONLY

POLARIZED PLUG INFORMATION• This appliance has a polarized plug (one prong is wider than the other) to reduce the

risk of electric shock. This plug will correctly fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Doing so will void the warranty.

11

NUTRIBULL

ET,

NUTRIBULL

ET,

R TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD

NUTRIBULL

ET,

R TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE BASE

NUTRIBULL

ET,

SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE BASE AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.

NUTRIBULL

ET,

AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH. EN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE GASKET RING.

NUTRIBULL

ET,

EN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE GASKET RING. SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER. ATTEMPTED

NUTRIBULL

ET,

SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE BLADE

NUTRIBULL

ET,

REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME A GASKET BECOMES LOOSE

NUTRIBULL

ET,

CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME A GASKET BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A REPLACEMENT

NUTRIBULL

ET,

OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A REPLACEMENT BLADE HOLDER AT: 1-844-696-2791.

NUTRIBULL

ET,

BLADE HOLDER AT: 1-844-696-2791.

STUBBORN CLEANUPNUTRIBULL

ET,

STUBBORN CLEANUP Cups or NUTRIB

ULLET,

Cups or SouperBlast PitcherNUTRIBULL

ET,

SouperBlast Pitcheryour cleanup a snap by filling the cup about 2/3 full with warm soapy water and NUTRIB

ULLET,

your cleanup a snap by filling the cup about 2/3 full with warm soapy water and

or utensils to press the activator buttons down while the Power Base is plugged in.

NUTRIBULL

ET, or utensils to press the activator buttons down while the Power Base is plugged in.HEAVY CLEANING:

NUTRIBULL

ET, HEAVY CLEANING:• Should the inside of the base become sticky due to spillage you may follow these

NUTRIBULL

ET, • Should the inside of the base become sticky due to spillage you may follow these additional cleaning instructions:

NUTRIBULL

ET, additional cleaning instructions:•

NUTRIBULL

ET, • UNPLUG

NUTRIBULL

ET, UNPLUG the Power Base and depress the power button

NUTRIBULL

ET, the Power Base and depress the power button

• Place the Power Base on a dish towel to catch any liquid or debris.

NUTRIBULL

ET, • Place the Power Base on a dish towel to catch any liquid or debris.• Pour a scant 1/8 cup of a dilute solution of distilled vinegar and warm (not hot)

NUTRIBULL

ET, • Pour a scant 1/8 cup of a dilute solution of distilled vinegar and warm (not hot)

water (1 part vinegar to 2 parts water) in to the Power Base where the blade

NUTRIBULL

ET, water (1 part vinegar to 2 parts water) in to the Power Base where the blade

LLCThe most important thing is to UNPLUG the Power Base before cleaning!

LLCThe most important thing is to UNPLUG the Power Base before cleaning!

Use a damp rag to wipe down the inside and outside of the Power Base.

LLCUse a damp rag to wipe down the inside and outside of the Power Base.

LLCVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

LLCVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. LLC

DISHWASHER. ver put your hands or utensils near the moving blade and never use your hands LL

Cver put your hands or utensils near the moving blade and never use your hands

or utensils to press the activator buttons down while the Power Base is plugged in.LLC

or utensils to press the activator buttons down while the Power Base is plugged in.

1 Extractor Blade

12 13

1 Oversized Cupwith 1 Pitcher Lid

1 Short Cup with1 Comfort Lip Ring

1 SouperBlast Pitcherwith 2-piece Lid

1 High-torque Power Base

1 User Guide 1 Recipe Book

1 Blade Cleaning Brush

1 Blade Remover

WHAT YOU GET:

1 Extractor Blade

1 Stay-fresh Resealable Lid

NUTRIBULL

ET, 1 High-torque Power Base

NUTRIBULL

ET, 1 High-torque Power Base

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, LLCLLC

LLC

LLC

LLC

1 Stay-fresh Resealable LidLLC

1 Stay-fresh Resealable LidLLC

LLC

Add ingredients into one of the cups.

Fill with liquid up to the Max Line. Then, twist the Extractor Blade onto the cup and tighten by hand to make sure the vessel is sealed.

Plug the power base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-button, to turn the machine on. The power button light will glow BLUE, signifying power. Next, place the cup blade-side-down onto the power base. This will activate the NutriBullet Rx’s SMART Technology function, causing the G-Button at the front of the unit to glow GREEN, and initiating the 1-minute extraction cycle.

When the cycle has completed and the GREEN light has turned off, turn off the unit by depressing the power button, located 90˚ to the left side of the G-button. The BLUE light will stop glowing, signifying the power is off.

MAX LINE

14 15

123

4

HOW IT WORKS* Do not run SouperBlast Mode with any of the blending cups. Only use the

vented SouperBlast Pitcher. Read all safety instructions fi rst!

EXTRACTING FOR NUTRIBLAST Rx’S

• NOTE: IF AT ANY TIME THE G BUTTON IS PUSHED FOR 2 SECONDS, THE BUTTON WILL TURN RED AND INITIATE SOUPERBLAST MODE.

• WHEN EXTRACTING OIL BASED OR STICKY FOODS, REFER TO INSTRUCTIONS LISTED UNDER TAP TECHNIQUE ON PAGE 19.

• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER NUTRIBLAST MODE! THE COUPLING GEAR IN BLADE BASE AND POWER BASE WILL BE HOT!

• TO TURN OFF THE MACHINE AT ANYTIME DURING THE NUTRIBLAST CYCLE (G BUTTON WILL BE GREEN), PRESS THE POWER BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR LIFT THE CUP OFF THE POWER BASE.

Note: You can remove the cup at any time during the blending cycle by simply lifting the cup off of the Power Base. If more extraction is required, lift the cup off of the Power Base, wait 15 seconds, then return it back onto the Power Base to start another SMART Technology cycle. Do not repeat more than 3 consecutive cycles resting 15 seconds between cycles. If you press the green G-button for 2 seconds and the light turns RED, you have switched in SouperBlast Mode. Simply lift the cup off the Power Base at any time to exit this mode or press the power button, located 90˚ to the left side of the G-button. When the vessel is removed from the power base, only the G-button light will turn off. When the power off button is pressed, the BLUE light will turn off and the blade will stop spinning. Always press the power off button upon completion of processing.

POWER BUTTON

NUTRIBULL

ET,

light has turned off, turn off the unit by depressing

NUTRIBULL

ET,

light has turned off, turn off the unit by depressing located 90˚ to the left side of

NUTRIBULL

ET,

located 90˚ to the left side of light will stop glowing,

NUTRIBULL

ET,

light will stop glowing,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, than 3 consecutive cycles resting 15 seconds between cycles. If you press

NUTRIBULL

ET, than 3 consecutive cycles resting 15 seconds between cycles. If you press the green G-button for 2 seconds and the light turns

NUTRIBULL

ET, the green G-button for 2 seconds and the light turns SouperBlast Mode

NUTRIBULL

ET, SouperBlast Modeexit this mode or press the power button, located 90˚ to the left side of the

NUTRIBULL

ET, exit this mode or press the power button, located 90˚ to the left side of the G-button. When the vessel is removed from the power base, only the G-button

NUTRIBULL

ET, G-button. When the vessel is removed from the power base, only the G-button light will turn off. When the power off button is pressed, the

NUTRIBULL

ET, light will turn off. When the power off button is pressed, the off and the blade will stop spinning. Always press the power off button upon

NUTRIBULL

ET, off and the blade will stop spinning. Always press the power off button upon completion of processing

NUTRIBULL

ET, completion of processing

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, LLC

You can remove the cup at any time during the blending cycle by simply

LLCYou can remove the cup at any time during the blending cycle by simply

lifting the cup off of the Power Base. If more extraction is required, lift the

LLClifting the cup off of the Power Base. If more extraction is required, lift the

cup off of the Power Base, wait 15 seconds, then return it back onto the LLC

cup off of the Power Base, wait 15 seconds, then return it back onto the Power Base to start another SMART Technology cycle. Do not repeat more LL

CPower Base to start another SMART Technology cycle. Do not repeat more than 3 consecutive cycles resting 15 seconds between cycles. If you press LL

Cthan 3 consecutive cycles resting 15 seconds between cycles. If you press

16 17

POWER BUTTON

EXTRACTING FOR SOUPERBLASTS Twist the Extractor Blade onto the SouperBlast Pitcher. Add ingredients into the SouperBlast Pitcher and

securely attach the vented, 2-piece lid SouperBlast Pitcher Lid.

Plug the power base into an electrical outlet. Press

the power button located 90˚ to the left side of the G-button, to turn the machine on. Next, place the cup blade-side-down onto the power base. This will activate the NutriBullet Rx’s SMART Technology function, causing the G-Button at the front of the unit to glow GREEN.

Press the GREEN G-Button down for 2 seconds

until it glows RED. This will indicate that SouperBlast Mode has begun. The unit will run in SouperBlast Mode for about 7 minutes before automatically turning off, causing the ingredients inside the SouperBlast Pitcher to heat up to about 70 degrees Celsius/150 degrees Fahrenheit. The unit is programmed to slow down twice during the 7-minute cycle to allow ingredients to settle for improved processing. This is normal. Do not repeat SouperBlast Mode for the same hot soup. If more heat is required, place the contents in a microwave-safe container and continue heating to desired temperature. To make a new soup, empty old contents, add new ingredients and wait 1 full minute before returning the vessel to the Power Base to start a new SMART Technology cycle. Do not repeat more than 2 cycles in SouperBlast mode resting 1 minute between cycles. After 2 consecutive cycles, allow the NutriBullet Power Base and SouperBlast accessories to cool off for 30-60 min. Depress the power button upon completion.

123

4

WARNING: AFTER SOUPERBLAST MODE, THE SOUPERBLAST PITCHER SURFACE, BLADES AND COUPLING GEAR WILL BE HOT! DO NOT TOUCH DIRECTLY WITH HANDS! ALWAYS USE HEAT RESISTANT PADS TO GRASP THE HANDLE AND TO SUPPORT THE BOTTOM OF THE SOUPERBLAST PITCHER. • IF YOU DESIRE SOUP TO BE HOTTER OR YOU WISH TO RE-HEAT SOUP, TRANSFER FIRST TO AN APPROPRIATE MICROWAVE SAFE CONTAINER OR STOVE TOP POT AND HEAT SEPARATELY—DO NOT REHEAT IN THE NUTRIBULLET Rx.

• TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G BUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR LIFT THE SOUPERBLAST PITCHER OFF THE POWER BASE.

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

POWER BUTTON

NUTRIBULL

ET,

POWER BUTTON

NUTRIBULL

ET,

make a new soup, empty old contents, add new

NUTRIBULL

ET,

make a new soup, empty old contents, add new ingredients and wait 1 full minute before returning

NUTRIBULL

ET,

ingredients and wait 1 full minute before returning the vessel to the Power Base to start a new SMART NUTRIB

ULLET,

the vessel to the Power Base to start a new SMART Do not repeat more than 2 NUTRIB

ULLET,

Do not repeat more than 2 cycles in SouperBlast mode resting 1 minute NUTRIB

ULLET,

cycles in SouperBlast mode resting 1 minute After 2 consecutive cycles, NUTRIB

ULLET,

After 2 consecutive cycles, NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G

NUTRIBULL

ET, TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G BUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE

NUTRIBULL

ET, BUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE LEFT SIDE OF THE G-BUTTON OR LIFT THE SOUPERBLAST PITCHER OFF THE

NUTRIBULL

ET, LEFT SIDE OF THE G-BUTTON OR LIFT THE SOUPERBLAST PITCHER OFF THE POWER BASE.

NUTRIBULL

ET, POWER BASE.

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, LLCLLC

HEAT RESISTANT PADS TO GRASP THE HANDLE AND TO SUPPORT THE BOTTOM OF THE

LLC

HEAT RESISTANT PADS TO GRASP THE HANDLE AND TO SUPPORT THE BOTTOM OF THE

IF YOU DESIRE SOUP TO BE HOTTER OR YOU WISH TO RE-HEAT SOUP, TRANSFER

LLCIF YOU DESIRE SOUP TO BE HOTTER OR YOU WISH TO RE-HEAT SOUP, TRANSFER

RST TO AN APPROPRIATE MICROWAVE SAFE CONTAINER OR STOVE TOP POT

LLCRST TO AN APPROPRIATE MICROWAVE SAFE CONTAINER OR STOVE TOP POT

D HEAT SEPARATELY—DO NOT REHEAT IN THE NUTRIBULLET R

LLCD HEAT SEPARATELY—DO NOT REHEAT IN THE NUTRIBULLET R

TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G LLC

TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G BUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE LL

CBUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE LL

C

18 19

HOW IT WORKS

SHAKE TECHNIQUESometimes, if you over fill the cups with ingredients or don’t put enough water, the results can increase the density of the mixture. This makes it hard for the ingredients toward the top of the cup to make it down to the blade. If some of your ingredients are having a hard time making it down to the blade, simply use the Shake technique.

Remove the cup and blade assembly from the Power Base.

With the cup and blade assembly in hand, shake it like a cocktail shaker. Then put it back on the Power Base.

TAP TECHNIQUEFor really stubborn ingredients that are clinging to the side of the cup instead of being recirculated into the cutting zone, simply use the Tap technique.

Take the cup and blade assembly off the Power Base and Tap the cup and blade assembly on the counter to force the ingredients down into the blades.

Place the cup and blade assembly onto the Power Base and finish processing.

11

22

WHEN MAKING NUT BUTTERS OR OIL-BASED FOODS, DUE TO THE CONSISTENCY, THE FOOD WILL PROCESS AND THEN STICK TO THE SIDES OF THE CUP. PROCESS IN 30 SECOND INCREMENTS BY SIMPLY LIFTING THE CUP OFF THE POWER BASE BETWEEN INTERVALS. BETWEEN CYCLES, USE A COMBINATION OF THE TAP METHOD DESCRIBED ABOVE AND OPEN CUP AS NEEDED TO SCRAPE DOWN THE INGREDIENTS TO THE CENTER OF THE CUP BEFORE CONTINUING TO PROCESS IN 30 SECOND INCREMENTS.

ALLOW MACHINE TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO PREVENT OVERHEATING AND DAMAGING THE UNIT.

NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, Ta

NUTRIBULL

ET, Take the cup and blade assembly off the Power Base

NUTRIBULL

ET, ke the cup and blade assembly off the Power Base and Tap the cup and blade assembly on the counter

NUTRIBULL

ET, and Tap the cup and blade assembly on the counter to force the ingredients down into the blades.

NUTRIBULL

ET, to force the ingredients down into the blades.

NUTRIBULL

ET,

NUTRIBULL

ET, Pl

NUTRIBULL

ET, Place the cup and blade assembly onto the

NUTRIBULL

ET, ace the cup and blade assembly onto the

NUTRIBULL

ET, 1

NUTRIBULL

ET, 112

NUTRIBULL

ET, 222

NUTRIBULL

ET, 22 2

NUTRIBULL

ET, 2

LLC

LLC

LLCTAP

LLCTAP TECHNIQUE

LLCTECHNIQUE

For really stubborn ingredients that are clinging to the side of the cup instead of

LLCFor really stubborn ingredients that are clinging to the side of the cup instead of

being recirculated into the cutting zone, simply use the Tap technique. LLC

being recirculated into the cutting zone, simply use the Tap technique.

ke the cup and blade assembly off the Power Base LLC

ke the cup and blade assembly off the Power Base

20 21

CLEANING

WARNING:ALWAYS UNPLUG THE NUTRIBULLET AND DEPRESS THE POWER BUTTON WHEN

CLEANING OR ASSEMBLING.

Washing the NUTRIBULLET RxCleaning the NUTRIBULLET Rx is so easy… simply place any of the pieces (except for the Power Base and blade holder) on the top shelf of the dishwasher or hand wash with warm soapy water and rinse.

STUBBORN CLEANUP If ingredients dry inside the NutriBullet Rx Cups or SouperBlast Pitcher, make your cleanup a snap by filling the cup about 2/3 full with warm soapy water and screw on the Extractor Blade and if using the SouperBlast Pitcher, put on lids. Place the cup assembly on the NutriBullet Rx Power Base for about 20-30 seconds. That will loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all done.

CLEANING THE NUTRIBULLET POWER BASEFor the most part the Power Base doesn’t really get dirty, but if you neglect to twist the blade on to the cup tightly, liquids can leak out and get into the base and activator buttons.

Here’s how to clean it up. Step 1: The most important thing is to depress the power button and UNPLUG the

Power Base before! Step 2: Use a damp rag to wipe down the inside and outside of the Power Base. • NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN

THE DISHWASHER. • Never put your hands or utensils near the moving blade and never use your

hands or utensils to press the activator buttons down while the Power Base is plugged in.

CLEANING SAFEGUARDS • AFTER MAKING A NUTRIBLAST OR SOUPERBLAST, THE BLADE MUST BE

CLEANED IMMEDIATELY• ALWAYS UNPLUG POWER BASE AND DEPRESS THE THE POWER BUTTON PRIOR

TO CLEANING, ASSEMBLING OR DISASSBMBLING.• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY TO KEEP IT IN GOOD WORKING ORDER.

• DO NOT WASH THE BLADES IN THE DISHWASHER AS ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

• THE NUTRIBULLET Rx CUPS CAN BE WASHED IN THE DISHWASHER AND SHOULD BE WASHED ON THE TOP RACK OF THE DISHWASHER USING THE NORMAL (NOT SANITIZE) CYCLE.

• THE NUTRIBULLET Rx CUPS AND BLADES SHOULD NOT BE EMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL WARP PLASTIC AND DAMAGE GASKETS.

• BLADES ARE SHARP! USE CARE WHEN CLEANING BLADES TO AVOID INJURY! RINSE BLADES IMMEDIATELY AFTER EACH USE TO PREVENT DEBRIS FROM DRYING AND STICKING TO BLADE COMPONENTS. IF NECESSARY, USE INCLUDED BRUSH TO LOOSEN AND DEBRIS AROUND BLADES, GASKETS AND BLADE HOUSING THREADS WITH CARE.

• HANDWASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT). • DRY IMMEDIATELY.• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH WARM (NOT HOT), MILD

SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE BASE AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.

• WHEN WASHING BLADES, DO NOT ATTEMPT TO REMOVE THE GASKET RING. SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE BLADE CONFIGURATION AND CAUSE LEAKAGE.

NUTRIBULL

ET,

NUTRIBULL

ET, soapy water and rinse.

NUTRIBULL

ET, soapy water and rinse.

, make your

NUTRIBULL

ET,

, make your cleanup a snap by filling the cup about 2/3 full with warm soapy water and screw

NUTRIBULL

ET,

cleanup a snap by filling the cup about 2/3 full with warm soapy water and screw put on lids. Place the

NUTRIBULL

ET,

put on lids. Place the Power Base for about 20-30 seconds. That will

NUTRIBULL

ET,

Power Base for about 20-30 seconds. That will loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all done.

NUTRIBULL

ET,

loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all done.

CLEANING THE NUTRIBULLET POWER BASE

NUTRIBULL

ET,

CLEANING THE NUTRIBULLET POWER BASEFor the most part the Power Base doesn’t really get dirty, but if you neglect to twist the

NUTRIBULL

ET,

For the most part the Power Base doesn’t really get dirty, but if you neglect to twist the blade on to the cup tightly, liquids can leak out and get into the base and

NUTRIBULL

ET,

blade on to the cup tightly, liquids can leak out and get into the base and

The most important thing is to depress the power button and UNPLUG the NUTRIBULL

ET,

The most important thing is to depress the power button and UNPLUG the NUTRIBULL

ET, •

NUTRIBULL

ET, • AFTER MAKING A NUTRIBLAST OR SOUPERBLAST, THE BLADE MUST BE

NUTRIBULL

ET, AFTER MAKING A NUTRIBLAST OR SOUPERBLAST, THE BLADE MUST BE CL

NUTRIBULL

ET, CLEANED IMMEDIATELY

NUTRIBULL

ET, EANED IMMEDIATELY

•

NUTRIBULL

ET, • AL

NUTRIBULL

ET, ALWAYS UNPLUG POWER BASE AND DEPRESS THE THE POWER BUTTON PRIOR

NUTRIBULL

ET, WAYS UNPLUG POWER BASE AND DEPRESS THE THE POWER BUTTON PRIOR

TO CLEANING, ASSEMBLING OR DISASSBMBLING.

NUTRIBULL

ET, TO CLEANING, ASSEMBLING OR DISASSBMBLING.

•

NUTRIBULL

ET, • NE

NUTRIBULL

ET, NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

NUTRIBULL

ET, VER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE

DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY

NUTRIBULL

ET, DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY

LLC

LLC

ALWAYS UNPLUG THE NUTRIBULLET AND DEPRESS THE POWER BUTTON WHEN

LLC

ALWAYS UNPLUG THE NUTRIBULLET AND DEPRESS THE POWER BUTTON WHEN CLEANING OR ASSEMBLING.

LLC

CLEANING OR ASSEMBLING.

Washing the NUTRIBULLET Rx

LLCWashing the NUTRIBULLET Rx

NUTRIBULLET Rx

LLCNUTRIBULLET Rx is so easy… simply place any of the pieces (except for the

LLC is so easy… simply place any of the pieces (except for the NUTRIBULLET Rx is so easy… simply place any of the pieces (except for the NUTRIBULLET Rx

LLCNUTRIBULLET Rx is so easy… simply place any of the pieces (except for the NUTRIBULLET Rx

Power Base and blade holder) on the top shelf of the dishwasher or hand wash with warm LLC

Power Base and blade holder) on the top shelf of the dishwasher or hand wash with warm soapy water and rinse. LL

Csoapy water and rinse.

CLEANING SAFEGUARDS LLC

CLEANING SAFEGUARDS

4 EASY STEPS! 1 Fill the cup with 50% leafy greens + 50% fruit.

2 Fill only up to the MAX line with water (add ice if you want).

3 Add 1/8 to 1/4 nuts and/or seeds, if desired.

4 Twist on the NUTRIBULLET Rx blade and blend until smooth.

23

HOW TO BUILD A NUTRIBLAST

Collard Greens

Kale

Romaine

Spinach

Spring Greens

Swiss Chard

Apple

Avocado

Banana

Blackberry

Blueberry

Cantaloupe

Cranberry

Fig

Almonds

Cashews

Walnuts

Nuts Seeds Super Chargers

Green Grapes

Guava

Honeydew

Kiwi

Mango

Nectarine

Orange

Papaya

Chia Seeds

Flax Seeds

Hemp Seeds

Pumpkin Seeds

Sesame Seeds

Sunfl ower Seeds

Goji Berries

Acai Berries

Peach

Pear

Pineapple

Plum

Raspberries

Red Grapes

Strawberry

Watermelon

LEAFY GREENS – 50%Choose one from the following list of leafy greens or, mix and match! Fill the Cup up to 50% with leafy greens. Work up to 2 full cups (2 handfuls) of leafy greens per Blast.

FRUITS – 50%Choose as many fruits as you want to equal 50% of your NUTRIBLAST Rx.

BOOSTS - 1/4 CUPThe following ingredients are an important part of your NUTRIBLAST Rx, adding additional fi ber and nutrition to every sip. Add 1/8 to ¼ cup to any Blast.

– MAX –

22

50% leafy greens(2 cups = 1 serving)

50% fruit(as many varietiesas possible!)

Add “boost”Add water to MAX line

WARNING!BAD SEEDS: While NUTRITION EXTRACTION can be amazingly benefi cial, not all fruit seeds and rinds are created equal. The following seeds and pits contain a chemical that releases cyanide into the body when ingested. DO NOT USE the following seeds and pits in the NUTRIBULLET Rx: • Apple Seeds

• Apricot Pits• Cherry Pits• Plum Pits

• Peach Pits

NOTE: You must add liquid up to the Max line when blending with the Extractor Blade for proper extraction to achieve the best taste and texture results with your NUTRIBULLET Rx and to prevent damage to the blade. Add enough liquid to cover ingredients, twist on the blade, and blend. A few of our favorite liquids are water, coconut water and unsweetened almond milk.

TIP: We recommend using frozen fruits such as berries or bananas if you desire a frosty NUTRIBLAST.

NOTE!1 YOU MUST ALWAYS ADD

A LIQUID BEFORE YOU BLEND A NUTRIBLAST.

2 DON’T OVERFILL YOUR CUP! MAKE SURE YOUR INGREDIENTS AND LIQUID REACH NO HIGHER THAN THE MAX LINE.

NUTRIBLAST Rx

NUTRIBULL

ET,

NUTRIBULL

ET, Fill only up to the

NUTRIBULL

ET, Fill only up to the

NUTRIBULL

ET, 3

NUTRIBULL

ET, 3 Add 1/8 to 1/4 nuts and/or seeds, if desired.

NUTRIBULL

ET, Add 1/8 to 1/4 nuts and/or seeds, if desired. Add 1/8 to 1/4 nuts and/or seeds, if desired.

NUTRIBULL

ET, Add 1/8 to 1/4 nuts and/or seeds, if desired.

NUTRIBULL

ET, 4

NUTRIBULL

ET, 4 Twist on the

NUTRIBULL

ET, Twist on the Twist on the

NUTRIBULL

ET, Twist on the Twist on the

NUTRIBULL

ET, Twist on the

NUTRIBULL

ET,

NUTRIBULL

ET, LEAFY GREENS – 50%

NUTRIBULL

ET, LEAFY GREENS – 50%Choose one from the following list of

NUTRIBULL

ET, Choose one from the following list of

NUTRIBULL

ET,

NUTRIBULL

ET,

can be amazingly

NUTRIBULL

ET,

can be amazingly benefi cial, not all fruit seeds and rinds are created equal. The following

NUTRIBULL

ET,

benefi cial, not all fruit seeds and rinds are created equal. The following cyanide

NUTRIBULL

ET,

cyanidecyanide

NUTRIBULL

ET,

cyanide into the

NUTRIBULL

ET,

into the body when ingested. DO NOT USE the following seeds and pits in the

NUTRIBULL

ET,

body when ingested. DO NOT USE the following seeds and pits in the • Cherry Pits

NUTRIBULL

ET,

• Cherry Pits• Plum Pits

NUTRIBULL

ET,

• Plum Pits

NUTRIBULL

ET,

• Peach Pits

NUTRIBULL

ET,

• Peach Pits

You must add liquid up to the Max line when blending with the Extractor NUTRIBULL

ET,

You must add liquid up to the Max line when blending with the Extractor NUTRIBULL

ET,

Blade for proper extraction to achieve the best taste and texture results with NUTRIBULL

ET,

Blade for proper extraction to achieve the best taste and texture results with

LLC

LLC

LLC4 EASY STEPS!

LLC4 EASY STEPS!

Fill the cup with 50% leafy greens + 50% fruit.LLC

Fill the cup with 50% leafy greens + 50% fruit. Fill only up to the LL

C Fill only up to the MAXLL

CMAX

Add 1/8 to 1/4 nuts and/or seeds, if desired.LLC

Add 1/8 to 1/4 nuts and/or seeds, if desired.

24 25

NUTRIBULLET Rx ONE-YEAR LIMITED WARRANTY

At NutriBullet, LLC, we take pride in our products. We go out of our way to make products of superior quality and craftsmanship, products designed to meet or exceed the demands placed on them through ev-eryday use. Because of this commitment to quality, we warrant the NUTRIBULLET Rx to be free of defects for one full year. Here’s the deal: If your NUTRIBULLET Rx stops operating to your satisfaction due to defects in materials or workmanship, we’ll gladly repair it or re-place it for free (excluding shipping and handling charges). For warranty service, simply call our customer service department at 1-844-MY-NBRX-1 (1-844-696-2791) or contact us via email from our website at www.nutribullet.com, simply click the Customer Service link, fill out and submit the customer contact form and we will be glad to help you. At NutriBullet, LLC, your complete satisfaction is our daily goal (hey, we know what it’s like to be the customer!).

NutriBullet, LLC warrants that the NUTRIBULLET Rx is free of defects in materials and workmanship for one year from the date of purchase. This warranty is valid only in accordance with the conditions set forth below:

1. Normal wear and tear are not covered by this warranty. This warranty applies to consumer use only, and is void when the product is used in a commercial or institutional setting.

2. This warranty extends only to the original consumer purchaser and is not transferable. In addition, proof of purchase must be demonstrated. This warranty is void if the product has been subject to accident, misuse, abuse, improper maintenance or repair, or unauthorized modification.

3. This limited warranty is the only written or express warranty given by NutriBullet, LLC. Any implied warranties on the product (including but not limited to any implied warranties of mer-chantability or fitness for a particular purpose) are limited in duration to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

4. Repair or replacement of the product (or, if repair or replacement is not feasible, a refund of the purchase price) is the exclusive remedy of the consumer under this warranty. NutriBullet, LLC shall not be liable for any incidental or consequential damages for breach of this warranty or any implied warranty on this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

5. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

NOTES

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

NUTRIBULL

ET,

rmal wear and tear are not covered by this warranty. This warranty applies to consumer use

NUTRIBULL

ET,

rmal wear and tear are not covered by this warranty. This warranty applies to consumer use

is warranty extends only to the original consumer purchaser and is not transferable. In addition,

NUTRIBULL

ET,

is warranty extends only to the original consumer purchaser and is not transferable. In addition, proof of purchase must be demonstrated. This warranty is void if the product has been subject to

NUTRIBULL

ET,

proof of purchase must be demonstrated. This warranty is void if the product has been subject to accident, misuse, abuse, improper maintenance or repair, or unauthorized modification.

NUTRIBULL

ET,

accident, misuse, abuse, improper maintenance or repair, or unauthorized modification.

is limited warranty is the only written or express warranty given by NutriBullet, LLC. Any

NUTRIBULL

ET,

is limited warranty is the only written or express warranty given by NutriBullet, LLC. Any implied warranties on the product (including but not limited to any implied warranties of mer

NUTRIBULL

ET,

implied warranties on the product (including but not limited to any implied warranties of merchantability or fitness for a particular purpose) are limited in duration to the duration of this

NUTRIBULL

ET,

chantability or fitness for a particular purpose) are limited in duration to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the

NUTRIBULL

ET,

warranty. Some states do not allow limitations on how long an implied warranty lasts, so the

pair or replacement of the product (or, if repair or replacement is not feasible, a refund of the NUTRIBULL

ET,

pair or replacement of the product (or, if repair or replacement is not feasible, a refund of the purchase price) is the exclusive remedy of the consumer under this warranty. NutriBullet, LLC NUTRIB

ULLET,

purchase price) is the exclusive remedy of the consumer under this warranty. NutriBullet, LLC shall not be liable for any incidental or consequential damages for breach of this warranty or NUTRIB

ULLET,

shall not be liable for any incidental or consequential damages for breach of this warranty or

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

________________________________________________

NUTRIBULL

ET, ________________________________________________

LLC

________________________________________________

LLC

________________________________________________

________________________________________________

LLC________________________________________________

________________________________________________

LLC________________________________________________

________________________________________________LLC

________________________________________________LLC

________________________________________________LLC

________________________________________________

26 27

NOTES

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

________________________________________________

NUTRIBULL

ET,

________________________________________________

NUTRIBULL

ET,

________________________________________________NUTRIBULL

ET,

________________________________________________

________________________________________________NUTRIBULL

ET,

________________________________________________NUTRIBULL

ET,

________________________________________________ NUTRIBULL

ET,

________________________________________________

LLC

Transform your health with the most nutrient dense nutrition available!

At NutriBullet, our motto has alwyas been, it’s not what you eat...its what you absorb. Now, with the NUTRIBULLET Rx, you have the ability to extract foods into the most bio-available state possible, using the most revolutionary technology

available. The NUTRIBULLET Rx is the result of years of research and development using the best engineers, top nutritionists, top doctors and leading laboratories to

create the best machine of it’s kind anywhere in the world.

The power, speed, heating capabilities and unique design of the NUTRIBULLET Rx make it easier than ever to maximize your daily intake and absorption of vegetables, fruits, nuts, seeds, and other superfoods...the very foods that have been scientifically

proven to reduce mortality when consumed and absorbed in abundance.

Join the millions of NutriBullet users who have transformed their health with the power of extracted nutrition, aka “nature’s prescription” to look and feel better

than they ever thought possible.

NUTRIBULLET is a registered trademark of CAPBRAN HOLDINGS, LLCCopyright © 2015 CAPBRAN HOLDINGS, LLC

LOS ANGELES, CA 90025, USAALL RIGHTS RESERVED, MADE IN CHINA

N A T U R E ’ S P R E S C R I P T I O N

NUTRIBULL

ET,

Transform your health with the most nutrient

NUTRIBULL

ET,

Transform your health with the most nutrient dense nutrition available!

NUTRIBULL

ET,

dense nutrition available!NutriBullet

NUTRIBULL

ET,

NutriBullet, our motto has alwyas been, it’s not what you eat...its what you

NUTRIBULL

ET,

, our motto has alwyas been, it’s not what you eat...its what you absorb. Now, with the

NUTRIBULL

ET,

absorb. Now, with the NUTRIBULLET

NUTRIBULL

ET,

NUTRIBULLETthe most bio-available state possible, using the most revolutionary technology

NUTRIBULL

ET,

the most bio-available state possible, using the most revolutionary technology available. The

NUTRIBULL

ET,

available. The NUTRIBULLET

NUTRIBULL

ET,

NUTRIBULLETusing the best engineers, top nutritionists, top doctors and leading laboratories to

NUTRIBULL

ET,

using the best engineers, top nutritionists, top doctors and leading laboratories to create the best machine of it’s kind anywhere in the world.

NUTRIBULL

ET,

create the best machine of it’s kind anywhere in the world.

The power, speed, heating capabilities and unique design of the

NUTRIBULL

ET,

The power, speed, heating capabilities and unique design of the make it easier than ever to maximize your daily intake and absorption of vegetables,

NUTRIBULL

ET,

make it easier than ever to maximize your daily intake and absorption of vegetables, fruits, nuts, seeds, and other superfoods...the very foods that have been scientifically NUTRIB

ULLET,

fruits, nuts, seeds, and other superfoods...the very foods that have been scientifically proven to reduce mortality when consumed and absorbed in abundance.NUTRIB

ULLET,

proven to reduce mortality when consumed and absorbed in abundance.

Join the millions of NUTRIBULL

ET,

Join the millions of NUTRIBULL

ET,

NUTRIBULL

ET,

NUTRIBULL

ET, LLCLLC

LLC

LLC