ADD ingredientsto the SHORT CUP or TALL CUP.

TURN on theNUTRIBULLET RX by pressing the power button, located 90˚ to the left side of the G-button. The power button will glow BLUE, signifying power.

POUR liquid upto the MAX LINE. NOTE: LIQUID MUST BE ADDED FOR PROPER EXTRACTION.

EXTRACTThe G Button will glow GREEN and the machine will automati-cally start to extract your Blast using NUTRIBULLET RX’S hands-free smart technology.

FLIP the cup blade-side-down onto the POWERBASE.

LIFT the cup off thePOWER BASE once the 1-minute extraction cyclehas automatically cometo a full stop. Lifting cupoff POWER BASE at anytime will stop themachine.**

SCREW on theEXTRACTOR BLADE.*

* To reduce the risk of injury, make sure blade is securely screwed onto cup before placing on Power Base.(NEVER PUT THE EXTRACTOR BLADE ON THE POWER BASE WITHOUT BEING SECURELY ASSEMBLEDONTO CUP FIRST).

** Do not touch coupling gear directly with hands after Nutriblast mode! The coupling gear in bladebase and Power base will be hot!

***After making a Nutriblast or Souperblast, the blade must be cleaned immediately.

DEPRESS thepower button, located 90˚ to the left side of the G-button, after eachuse, to turn off theNUTRIBULLET RX. TheBLUE light will stopglowing signifying thepower is off.

TWIST off theblade and enjoy!***

Important USAGE, SAFEGUARDS and CAUTIONARY information.READ CAREFULLY.

21

65 7

3 4

8

9

MAKING A NUTRIBLAST Rx COULDN’T BE EASIER!

CAUTION: THIS QUICK START GUIDE IS NOT INTENDED TO REPLACE THE USER GUIDE. FOR YOURSAFETY, CAREFULLY READ ALL USER GUIDE INSTRUCTIONS BEFORE OPERATING YOUR NUTRIBULLET Rx.

POWER BUTTON

POWEROFFBUTTON

NUTRIBULL

ET, LLC

SCREW the EX-TRACTOR BLADE onto the base of the SOUPERBLAST PITCH-ER.* Add ingredients and liquid. NOTE: LIQUID MUST BE ADDED FOR PROPER EXTRACTION.

PLACE the pitcher blade-side-down onto the POWER BASE to initiate SMART TECHNOLOGY and cause the G-Button to glow GREEN. Within 1 minute of extraction, press the G-Button for 2 seconds. The button will glow RED, indicating activation of the 7-MINUTE HEATED CYCLE.

SECURE the 2-PIECE VENTED SOUPERBLAST LID on top of the pitcher.

TURN on the NU-TRIBULLET RX by press-ing the power button, located 90˚ to the left side of the G-button. The power button will glow BLUE, signifying power.

AFTER the cycle completes and auto-matically shuts off the unit, carefully lift the soup pitch-er off the POWER BASE.** (WARNING, INGREDIENTS WILL BE HOT) ALWAYS use appropriate heat resis-tant pads to support the bottom of the pitcher and remove the pitcher from the POWER BASE.

DEPRESS the power button, located 90˚ to the left side of the G-button, after each use, to turn off the NUTRIBULLET RX. The BLUE light will stop glowing signifying the power is off.

REMOVE the SOUPERBLAST LID care-fully, using appropriate heat resistant pads as SOUPERBLAST will be hot and steam may escape!

Pour your SOUPERBLAST into serving dishes and enjoy!***

Important USAGE, SAFEGUARDS and CAUTIONARY information.READ CAREFULLY.

2 31

5 6 7

4

CAUTION: THIS QUICK START GUIDE IS NOT INTENDED TO REPLACE THE USER GUIDE. FOR YOUR SAFETY, CAREFULLY READ ALL USER GUIDE INSTRUCTIONS BEFORE OPERATING YOUR NUTRIBULLET Rx.

NUTRIBULLET is a registered trademark of CAPBRAN HOLDINGS, LLC. Copyright © 2015 CAPBRAN HOLDINGS, LLCHOMELAND HOUSEWARES, LLC. LOS ANGELES, CA 90025, USA. ALL RIGHTS RESERVED, MADE IN CHINA

* To reduce the risk of injury, make sure blade is securely screwed onto pitcher before placing on Power Base. (NEVER ATTEMPT TO PUT THE EXTRACTOR BLADE BY ITSELF ON THE POWER BASE WITHOUT BEING SECURELY ASSEMBLED ONTO THE PITCHER FIRST).

** Do not touch coupling gear directly with hands after SouperBlast mode! The coupling gear in blade base and Power base will be hot!

***After making a Nutriblast or Souperblast, the blade must be cleaned immediately.

MAKING A SOUPERBLAST COULDN’T BE EASIER!

POWER BUTTON

POWER OFFBUTTON

NUTRIBULL

ET, LLC