MyriaMeshCommissioning App

Tooling for the (re-) commissioning of a MyriaMesh Building Light

Control System

MyriaMesh Commissioning toolingThe Myriamesh Commissioning App for iPad is used for the (re-)commissioning of the lighting system and offers the following standard features:

• Enables access to the MyriaMesh network via a Bluetooth gateway

• Map lighting fixtures, sensors and switches on the floor plan of the building

• Assign lighting fixtures, sensors and switches to one or more groups

• Set properties for light control behavior of each group

• Switch or dim groups with the Commissioning App

MyriaMesh demo kit for light control

Commissioning of MyriaMesh demo kit

4x Battery powered LED Light with MyriaMesh Module

MyriaMesh Module for OEM

2x MyriaMesh Remote Switch

1x MyriaMesh Multisensor

Apple iPad Air2 withMyriaMesh CommissioningApp

MyriaMesh BLC200

MyriaMeshBluetooth Gateway

Step 1: Map devices on floorplan (1/2)

1) Detected devices by commissioning tooling 2) Drag and drop devices on canvas. Floorplan can be added.

Step 1: Map devices on floorplan (2/2)

3) Device identification by Node ID and/or “flashing” light by selecting lamp

Step 2: Group addressing of devices

4) Add groups and give groups a name 5) Assign devices to a group by selecting devices

Step 3: Set properties for light control (1/2)

6) Set light level of group as a whole 7) Set properties of individual lamp

Step 3: Set properties for light control (2/2)

8) Set properties of Multisensor 9) Set properties of remote switch

Wim Hogenhout

M: +31 (0)6 5575 4567

E: wim.hogenhout@chess-wise.eu

Disconnect Bluetooth Gateway and youare done.

Your MyriaMesh Building Light Control System is working autonomous