multidispline inspector - deepak rai

CV of Deepak Rai Multidiscipline QC inspector of 8

Resume of

Deepak Rai


Curri cul um Vi tae

Name : Deepak Rai Nationality : Indian Marital Status : MarriedLanguages known : English & Hindi

E d u c a ti on a l Q u al i f i c a t i o n / Y e a r : HSSC in 2000 (From Himachal Pradesh Board, India)

Comput er Skill s:

MS Word & Excel

Summary of Work Experi ence :

More than 14+ Years of working experience in Inspection & Quality Control activities of Offshore Drilling Jack up RIGS, Onshore Structures, Oil & Gas fields& Petroleum Refineries in India, UAE (Dubai) & Africa (South Africa, Nigeria, Sudan & Angola) region.

Interacted to ASME Sec. V, Sec. VIII, Sec. IX, API–1104, AWS D1.1 & ASME B31.3.

Profi ci ency

Certified Welding Inspector - CSWIP 3.1 (Certificate No. 36550/2) NACE CIP-1 (Certificate No. 43431) NACE CIP-II (Certificate No. 43431) PAUT/TOFD Level –II ( IIS GENOA-ITALY) NDT Level II in UT, RT, MT, DP (EN- 473) NDT Level II in UT, RT(Interpretation), MT, PT & UT - TKY Welds (ASNT)


Empl oyment Hi story:

Period : From November 2014 Till Date Company : Bureau VERITAS Abu Dhabi (UAE) Position : PAUT / Welding InspectorProject : ADMA OPCO – ULFFD EPC-1 ADMA OPCO- ZAKUM FIELD (OFFSHORE)

ZADCO - SATAH FULL FIELD DEVELOPMENT PROJECT(OFFSHORE)

Inspection of piping activities like Flange Face inspection, Valve installation, gasket & bolt as per drawing prior to installation.

Witness welder qualification, NDT activities (MT, PT, UT), Final visual and dimensional inspection on finished items.

To perform piping line check to ensure correct line pipe, Valves, Fittings, other accessories, pipe straightness, pipe elevation, PipeSupport, Flange to Equipment Free Span and other requiredInspection before Hydrostatic Testing.

Witness the hydrostatic test and review the reports. Perform piping line check after reinstatement to ensure all items

are in correct position and location as per P&ID. Witness of conducting Welder Performance Qualification Test

(WPQT) Reviewing of all Advanced NDT activities, for all NDE inspectors

including AUT, TOFD, and Phased Array of structural and piping Review paperwork for completeness and accuracy. Interpret radiographs in accordance with the specified industry

codes, standards, and procedures for the work. Perform inspection in all stages of coating /painting as per the

ITP/drawings/procedures. Verification of abrasive size/type to achieve the required anchor

profile /pattern as per datasheet/procedure.

Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/ color & verifying paint product data sheet.

Period : From July 2009 to October 2014Company : Saipem (Petromar kwnda Base Soyo, Angola)( Present company

& location) Saipem Contracting Nigeria Ltd.( July 2009-April 2011)Position : Multidisciplinary QC inspectorClient : Total, Shell, Camron, Chevron, BP, Exxon Mobil & GEResponsibilities:

Performing and inspecting various Piping & structural of Offshore and Onshore by Welding Inspection using International Codes and Standards like AWS D1.1, ASME B31.3, API-1104, ASME Sec- V.

carried out PAUT/TOFD for inspecting Circumference butt welds (20mmx5mtr) and longitudinal butt welds (20mmx3mtrs) in Kizomba Phase-II project.

Monitor the pipe spool erection work as per GeneralArrangements drawing


Interpret applicable drawings and other documents. Carry out visual and dimensional checks of piping spools Review paperwork for completeness and accuracy. Inspection on site / shop at various vendor facilities for the project

work as per Inspection & Test Plan (ITP) and Quality ControlProcedure (QCP).

Monitor that the welding procedures specified are qualified and the welding is performed in accordance with the applicableProcedure.

Witness performance and testing of procedure qualification weld tests, and/or be able to verify these activities when performed by outside agencies.

Verify documentation of welding procedure qualifications. Verify that welders, welding operators and tackers have been

properly qualified in accordance with the applicable codes, standards or other documentation and that their qualifications permit them to use the welding procedures specified for their work.

Verify documentation of the weld qualification test results. Monitor correct fit-up, joint preparation and surface finish meets

the applicable code specification or standard. Monitor proper pre-heat and interphase temperature is maintained

as required per the applicable code, standard or other documents. Prepare clear and concise reports. Monitor that the specified welding consumables are used and that

the consumables are maintained in the proper manner/condition,per specification requirements or as recommended by the manufacturer.

Worked as a Third Party (UT CROSS CHECK) for EXXONMOBILfrom Petromar side in Kizomba Satellite Project Soyo yardAngola.

Interpret radiographs in accordance with the specified industry codes, standards, and procedures for the work.

Maintain accurate, up-to-date and extensive weld records so as to allow tracking of the work progress with respect to weldcompletions and NDT status.

Final welding inspection and maintaining all quality records. Attending all planning quality and safety meeting with the client.

Painting Responsibilit ies:

Perform inspection in all stages of coating /painting as per theITP/drawings/procedures.

Verification of abrasive size/type to achieve the required anchor profile /pattern as per datasheet/procedure.

Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/ color & verifying paint product data sheet.


Attend the progress/project/weekly meeting with client/sub- contractor &scheduling the blasting /painting activities forkeeping the progress plan with project schedule/Quality.

Witness blaster/ painter qualification test & review their qualification.

Preparing Daily/Weekly/Monthly progress Reports, InspectionReports, Adhesion and Holiday

Inspection reports including performing /demonstrating the required tests & review of final inspection records/dossier.

Monitoring and recording the environmental conditions during blasting and painting application.

Conducting/ witnessing holiday /pinhole/pullout test to evaluate the paint defects.

Checking/witnessing the paint characteristics using paint test panels with client/Third party inspector.

Visual inspection of the steel members after blasting prior to painting.

Checking random surface profile readings on the blasted members with Testex tape.

Checking the WFT /DFT& carrying out visual inspection for any coating acceptance..

Monitoring the mixing of coatings and recording the batch ID of paint /Thinners.

Inspection of blasting/painting equipment condition prior to use. Take care about the safety of all persons during production & aim

the job towards without accident.

Period : From 12 November 2006 to 22 June2009Company : M/S Lamprell Energy Ltd. (A British owned company involved in

New build and refreshment of jack up oil Rigs, Modules and Platforms).

Position : QC InspectorClient : Nabors, Noble, NDC, Ensco, Transocean, Aban, Scorpion drilling

International and Egyptian Drilling CompanyResponsibilities:

Carried out stage wise and final inspection of Structural Items such as cantilever, Leg of Rig, Accommodation modules, Hull structure, Drill floor, Sub base, H.P mud, Cement and other various system related to rig piping as per project Inspection & Test plan.

Conducted PAUT, MUT,MPI on the pipe and riser fabrication as per client specification.

Carried out visual inspection of final welding and monitoring of welding works, verification of welding parameters, consumables &

welding equipments. Visual inspection & final dimensions verification. Witness of Hydro Test and Pneumatic Testing. Witness of Penetrant test, Magnetic Particle Test & UT of weld

joints.


Interpretation of radiographic films. Witness of hardness testing in various welds & parent materials. Preparation of daily welding inspection reports. Final Documentation of project. Familiar with ASME, ASTM, AWS, ABS, Codes & Standards

Specifications. Inspection of Paint materials and Verify the Storage conditions. Inspection of Blast cleaning Equipment, Compressors, Abrasives

Prior to Blasting. Weather Monitoring such as Air Temperature, Relative Humidity, Dew point temperatu

etc. Verify the Cleanliness of surface area. Verify the qualification of Blaster/Painters Anchor Pattern/Profile check of the blasted surface and ensure

profile is as per project specification. Ensure mixing and thinning as per Manufacturer's Technical Data

Sheet.. Inspection of Painting before, during and after application. Monitor Induction Time, Pot life and continuous agitations

whenever required. Ensuring DFT & WFT of various coating system is as per project

specification. Perform inspection duties with a fair and objective approach. Ensure degree of curing of coatings at each stage and ensure

overcoat intervals. Conduct and witness Pinhole/Holiday detection test. Verify adhesion of coatings by Crosscut/Hatch cut Test methods. Maintain Good relationship with clients on Quality related matters. Ensure touch up works carried out fully in site prior to final

inspection.

Period : From January 2006 to November 2006Company : M/S Metmech Radiographic Inspection Pvt. Ltd, MumbaiPosition : NDT InspectorClient : L&T, HPCL, MGL, ONGC and Flat product Equipment India Ltd.Responsibilities:

Performing Radiography on weld joints of Gas and oil pipe line, storage tank and pressure vessel, Ultrasonic Testing on Offshore TKY weld joints, Magnetic particle & Liquid penetrant testing of weld joints, casting, forging and basic raw material of various type and grade under Third Party Inspection agencies: EIL, DNV,BVIS, CEIL, LRIS.


Period : From March 2004 to December 2005Company : M/S Automec Engineering and Consultancy, MumbaiPosition : Welding / NDT InspectorClient : L&T, Gujarat Ambuja, Thermec, BPCL, HPCL, Tata Power,

Phills Engineering Ltd. Responsibilities: • Performing welding inspection & NDT of Welds, casting, forging and basic raw material of various type and grades under third party inspection agencies like DNV, Baxcounsel, EIL, LRIS.

Period : From February 2002 to January 2004Company : M/S PIH LTD, DUBAI (A British managed company specialized in

NDT Inspection services such as UT, PT, MT, HT & RT)Position : NDT InspectorResponsibilities:

Worked as a NDT Inspector for cross country pipeline & refineries on the following projects:Period : From January 2003 to January 2004Company : GLMC- South AfricaPosition : Inspecting Radiography, ultrasonicClient : SASOLProject : Cross country pipeline from Mozambique to Sicunda (26”dia &

875km long.Responsibilities:

Performing and inspecting Radiography, ultrasonic and MPI in main line welding and Tie-in joints.

Equipments used: IPSI Crawler, ICM X-Ray tube (250KV and 300KV), MT- Permanent

Period : From September 2002 to January 2003 Dubai, UAE Contractor : Dodsal / GammosPosition : NDT InspectorClient : DPC, GPCResponsibilities:

Worked as NDT Inspector during construction of pressure vessel and higher thickness structural. Carried out radiography of the joints, RT films Processing, interpretation of radiographs, ultrasonic test, and various NDT examinations including penetrant testing, magnetic particle test, hardness test in Gammos, Hamriyah and Jebel Ali workshop.

Period : From February 2002 to August 2002Consultant: : GNPOC, Petrofac SudanPosition : Highly Petroleum CorporationResponsibilities:

Assisting RT exposure of storage tank and plant piping, RT films interpretation and various NDT activities like UT scanning, Penetrant testing & Magnetic particle testing.


Shut Down / I n- Ser vice Inspection Job Exper ience:

NDT inspection of pressure vessel, storage tank, pipelines, Boiler, exchanger, furnace, heater, etc. using NDT methods at various petrochemical in India, during shut down.

Hindustan Petroleum Co. Ltd. (HPCL, Mumbai) Bharat Petroleum Co. Ltd. (BPCL, Mumbai) Chemical Terminal Trombay Ltd. (CTTL-Mumbai) ONGC platforms in Mumbai High

multidispline inspector - deepak rai

Documents