motorbike tools

Download MOTORBIKE TOOLS

Post on 24-Feb-2016

36 views

Category:

Documents

0 download

Embed Size (px)

DESCRIPTION

MOTORBIKE TOOLS. Igor Žmavc December, 2013. 3050/2BI Clutch and gear wheel holding tools. The tool is designed for holding the clutch, gears and the cam shaft when tightening gears in the range from 40 up to 130 mm Usage for all types of motorbikes - PowerPoint PPT Presentation

TRANSCRIPT

Predstavitev Orodje SLO

MOTORBIKE TOOLSIgor mavcDecember, 2013www.uniortools.com1The tool is designed for holding the clutch, gears and the cam shaft when tightening gears in the range from 40 up to 130 mmUsage for all types of motorbikes

Its wedge-shaped gripping shanks provide grip between teeth while preventing them from being damagedThe tool also includes a screw, which enables the tool to be fixed in a certain position and, consequently, a firm gripMaterial: special steel C45- 6 mm; hardened and tempered 30-35HRcMax. allowable torque: 200 NmSurface finish: chrome plated according to EN12540Ergonomic heavy duty double component handle

3050/2BI Clutch and gear wheel holding tools

Plan prodaje 2010The tool is designed for holding the magnet and the sprocket Due to its universal structure, it allows holding holes with a diameter of 5 or 9 mm and at a distance between 20 to 180 mm Usage for all types of motorbikes

The tool also has a screw that enables fixing of the tool at the actual distance between holes on the magnet or the sprocketMaterial: St 37- 6 mm; nozzle C45, hardened & tempered 40- 45HRcMax. allowable torque: 150 NmSurface finish: chrome plated according to EN12540Ergonomic heavy duty double component handle

3051/2BI Rotor and sprocket holding tools

Plan prodaje 2010This tool is used to attach and detach valve springs and features a self-locking lever and quickly-adjustable fittings (dim. 17, 21 and 25 mm) to allow it to be used with all kinds of engines

NEW

Material: special tool steel C45 4 mm; material of fittings: C45Hardened and tempered 40- 45HRcChrome plated EN 12540; Ergonomic heavy duty double component handle

3052/2BI Valve spring compressor for motorbikes

Plan prodaje 2010Allows flywheel removal without pulling motor from hull The tool has different sizes of external thread, thus enabling coverage of the majority of motor types that have a magnet with an internal thread: M10x1 M14x1,5 M16x1,5M16x1,5 M18x1,5M18x1,5 M20x1,5M24x1 M22x1,5M27x1L

3055/4A 3055/4BOn each axis, there is an attachment for an open-end wrench that makes the removal of the magnet easier Material: special tool steel C45; hardened and tempered 40- 45HRcSurface finish: blacken to standard DIN 50938

3055/4A,B Flywheel puller with external thread

Plan prodaje 2010Intended for use where there is not enough place for working with standard socket wrenches

Material: 25CrMo4; hardened and tempered 42- 48HRcSurface finish: chrome plated according to EN12540Will not withstand torque according to ISO 2725-1 standard for standard socket wrenches

3056/2 Socket 1/2" with thin wall

Plan prodaje 2010for scooters PIAGGIO, GILERA 50-125ccm; water- and air-cooledit is used as a block for the gear on the starter when untightening the front part of the drive

comes with 3 different lengths of accessories (7,5 mm, 10 mm in 25,5 mm) that cover several types of drivesMaterial: St37- 4 mm; nozzle C45, hardened and tempered 30- 35HRcSurface finish: chrome plated according to EN12540

3057.1/2 Universal variator holder tool

Plan prodaje 2010For scooters PIAGGIO, GILERA 50-125ccm; water- and air-cooledTool has a triple function:it is used as a block for the gear on the starter when untightening the front part of the driveaccessories for holding the pot on the back part of the drive for untightening the nutWrench S34/S38 for untightening the inside nut of the back part of the drive

comes with 3 different lengths of accessories (7,5 mm, 10 mm in 25,5 mm) that cover several types of drivesMaterial: St37- 4 mm; nozzle C45, hardened and tempered 30- 35HRcSurface finish: chrome plated according to EN12540

3057/2 Variator and clutch drive holder tool with ring wrench

Plan prodaje 2010Intended for use where there is not enough space for working with standard wrenches for replacing spark plugs

Drop forged, material: 25CrMo4; hardened and tempered 42- 48HRcSurface finish: chrome plated according to EN12540

3058/2 Spark plug socket 3/8" with thin wall

Plan prodaje 2010Enables the removal of valve seals without removing the head of the motorthe accessories covers the following dimensions of spark plugs: M10x1, M12x1.25, M14x1.25 and M18x1.5 accessories 8 mm, 13 mm and 16 mm for removing pins accessories 12 mm in 14 mm for assembling seals

3059 Valve seal removal set for motorbikes

Plan prodaje 2010Accessories 5 mm in 9 mm for assembling pins3059 Valve seal removal set for motorbikes

Plan prodaje 2010Chain breaker, press and riveting tool for REGINA, DID and RK chains with graduation: 415, 420, 428, 520, 525, 530, 532

3200/2BI Chain breaker, press and riveting tool for motorbike

Plan prodaje 20103200/2BI Chain breaker, press and riveting tool for motorbike

Plan prodaje 2010it is used for the control of the tension of the drive belts

Controlling tool is mounted onto the belt. On the marked part of the engine the belt is forced by hand to establish the sag of the belt so that it is in conformance with the pressure force of 45Nand the sag as defined by the manufacturer the belt

Used in accordance with the servicing instructions

3201/2 Tool for controlling cam belt tension for motorcycle

Plan prodaje 2010The spoke wrench is used for tightening spoke nipples

Material: special tool steel 31CrV3, thickness 6 mmHardened and tempered: 40- 45HRcSurface finish: chrome plated according to EN12540

3301/2 Spoke wrench for motorcycle

Plan prodaje 2010It enables radial control of the rim position with a sensorThe geometry of the calipers enables a simultaneous axial control for accurate truing of the rim

- Wheels with dimensions 19 to max. 32 inches can be centered - for axis dimensions of 12 to 36 mm The stand has a spirit level for setting in a horizontal position The stand enables fixing of cones to the axis that enable the centering of the wheel on its own bearings, thus preventing the possibility of centering errors Material: steel DC01; lacquered E/P

3302/6 Stand for motorcycle wheel alignment

Plan prodaje 2010The tool is used for compressing brake pistons when replacing brake pads Is useful for compressing single, double and tripple brake pistons

For compressing double or triple brake pistons, we leave the used brake pads in the brake housing. This will prevent one of the pistons being pushed from the housing.Material: special tool steel C45; hardened and tempered 35- 40HRcSurface finish: chrome plated according to EN12540

3303/2 Disc spreader for motorcycle

Plan prodaje 2010This tool is used to holding the cartridge rodUseful for most types of motorcycles

Material: special tool steel C45, 2 mmSurface finish: chrome plated according to EN12540

3305/2 Holding tool for cartridge rod for motorbikes

Plan prodaje 2010For operate setting the telescopes of motorbikes and scooters from 32 till 60 mm

The slim version of the wrench enables the setting of slim toothed nuts

Material: special tool steel C45, 4 mm; Hardened and tempered 30- 35 HRcPlastic dipped handleSurface finish: chrome plated according to EN12540

3401/2P Flexible hook wrench for motorbikes

Plan prodaje 2010Tool is used for assembling and disassembling springs (spring for support legs, seat and reservoir, by exhaust systems, as assistance in assembling the chain of the cam shaft, etc)

Material: special tool steel C45; Hardened and tempered: 45- 50HRcSurface finish: chrome plated according to EN12540Ergonomic heavy duty double component handle

3600/2BI Spring hook

Plan prodaje 2010By using the tool set, you can disassemble:1. the entire shield (plastic parts)2. most parts of the frame3. engine parts like: - replacing spark plugs - changing oil in the transmissions (of the gearbox) - disassembling various engine bonnets - disassembling brakes and replacing brake pads

3700 Scooter tool set

Plan prodaje 2010By using the tool set, you can disassemble:1. the entire shield (plastic parts)2. most parts of the frame3. engine parts like: - replacing spark plugs - changing oil in the transmissions (of the gearbox) - disassembling various engine bonnets - disassembling brakes and replacing brake pads - changing brake fluid - disassembling wheels - for various suspensions and holders

3700PRO Scooter tool set

Plan prodaje 2010for assembling or dissasembling oil filters in restricted access areaused with ratchet 3/8" and proper extension bar

M NEW M NEW M

NEW M M M

Material: tool steel St14 / DC04;Max. allowable torque: 140 NmSurface: coated with electro-black oxide finish for rust protection

1977/6 Oil-filter wrench

Plan prodaje 2010dimensions (mm) 17, 19, 22, 24 are used for the removal and fitting of front wheels