machanical engineeing jabalpur knpc poly

7/30/2019 Machanical Engineeing Jabalpur Knpc Poly

1/33

1

FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION

(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)

Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected]

Branch : Mechanical. Name of Laboratory : Energy Measurement and Monitoring

S

No.

Name of the Equipment

to be procured

Quantity Curriculu

m

Reference

s

Specification (please give enclosure

references)

Cost of

equipm

ent (in

Lacs)

Background material.

Product Brochure.

Printout of productspecifications giving

website

reference/URL.(Please

give enclosure

reference)

1 Power

Analyser(3phase)

01 No Automob

ile code-(611)

Salient Features

Accurate and reliable measurement of any Load - nonlinear like DC drives, Invertors, Furnaces, UPS etc. - Un

balance Loads

Continuous cycle by cycle measurement of all currentand voltage channels

Suitable for 2 wire / 3 wire / 4 wire - 3 phase systems

Wide range of Clamp on CT 3000A

2MB memory with programmable interval of datacollection from 1sec to 30mins

Recorded parameters can be stored and viewed in PCfor detailed analysis

RS232 Communication facility with computer to transferthe data

Time of Day (TOD) measurement - Recording on anyspecified time period

Portable - Self powered from measurement source

User set alarm for low PF, Failure errors, min / maxvalues

Bright LCD graphical display for menu driven display

02 http://www.induselect.com/en

ergy-monitoring-equipment/power-

analyzer.html
mailto:[email protected]:[email protected]:[email protected]://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlmailto:[email protected]


2/33

2

Parameters Displayed:

o Voltage, Current, Frequency, Power Factor

o KW, KVA, KVAR (Import & Export)

o KWHr, KVAHr, KVARHr

o Peak Voltage, Current and Power

Technical Specifications

Voltage :300 V L-N and 510 V L-L RMSCurrent : Clamp on CTs. 100 Amps. To 3000 Amps.Power Supply:220V AC - 50 HzData Memory :1 MB / 2 MB and USB / RS232communication portDisplay : LCD Graphical Display

2 Ultrasonic water flowmeter

01 No FM/HM(401)

Features

DSP Measurement Technique

Reynolds Number Correction

Easy to Install

Simple to Follow Programming Menu

Clamp-on Sensors

Flow Range 0.1m/sec to 20m/sec bi -directional

Display 64 x 240 pixels graphic display

Programming via 16 key control panel

Battery or mains operation

Rechargeable battery

Battery Life 20 hours from fully charged, load depended

Power 110 240VAC +/-10% supply via PSU

9 user selectable languages including English, German,

French, Spanish and Russian!

Accuracy Pipe ID > 75mm 0.5% to 2% of flow reading

for flow rate >0.2m/s

Accuracy Pipe ID 13-75mm 3% of flow reading for flow

rate >0.2m/s

03 http://www.flow.co.in/ultrasonic-flow-meter.htm
http://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htm


3/33

3

3 Flue gas analyser 01 No Thermal

Engg(402)

Operating Temperature Range : 25C to 350CBattery Rechargeable Ni-Cd, Life 4-5 hours, charge time 2hoursCharger Input Voltage 230V; 50 ACFuels Natural gas, light oil, heavy oil, propane, butane, coal,cokeDisplay LCDData Logging / Printing USB/ RS232 or parallel portTime and Date 24 hour real time clockPrinterImpact with a replaceable ribbonCertification Designed to meet BIS or BS7927 BritishStandard for portable flue gasanalyzersProbes with cable length minimum 10 mConstruction Pistol grip; 250 mm or more stainless steelprobe length;depth gauge; 2500 mm or more hose lengthK-type ThermocoupleAccuracy 0.3%; or 1C ( 1.8F)Maximum Temperature 800C andHigh temperature to 1,100C , 1.0 m insertion length

Gases Range Resolution AccuracyOxygen 0 - 25%, Accuracy 0.1% - 0.3%Carbon Monoxide 0 - 10,000 ppm , Accuracy 1 ppm for 1000 ppmNitric Oxide 0 - 1,000 ppm , Accuracy 1 ppm for 1000 ppmCarbon Dioxide (Calculated) 0 - 25%CO/CO2 Ratio 0 - 0.9999Combustion Efficiency 0 - 100%With following SensorsRange Resolution AccuracyNitrogen Dioxide 0 - 2000 ppm, Accuracy 1 ppm for 100 ppmSulfur Dioxide 0 - 2,000 ppm , Accuracy 1 ppm for 1000 ppmHydrogen Sulfide 0 - 200 ppm , Accuracy 1 ppm 40 ppmHydrogen Chloride 0 - 50 ppm , Accuracy 1 ppm for 40 ppmHigh Capacity Carbon 0 - 100,000 ppm , 1 ppm for 1000 ppmMonoxide (Instead of Standard) >100 ppm; Accuracy 5%

05 http://www.flow.co.in/ultrason

ic-flow-meter.htm
http://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htm


4/33

4

Draught / PressureMeasurement RangeAccuracy 150 mbar ( 61 in WG)Resolution 0.01 mbar (0.4 in WG)Accuracy 0.5% fsd measured at 50 mbar (20 inWG)

K-Type ThermocoupleAccuracy 0.3%; or 1C4 Smoke meter 01 No Thermal

Engg

(402)

Measurement principle:

Measurement of filter paper blackening

Measured value output:

FSN (filter smoke number) or mg/m (soot concentration)

Measurement range:

0 to 10 FSN

Detection limit:

0.002 FSN or ~ 0.02 mg/m

Resolution:

0.001 FSN or 0.01 mg/m

Exhaust pressure ranges:

(-300*) -100 to 400 mbars

(-500*) -200 to 750 mbars with the special sampling option

0 to 3000 mbars with the high-pressure option

(*) with activated altitude simulationMaximum exhaust temperature:

600 C with standard 340 mm sample probe (800 C with

780 mm long sample probe)

Interfaces:

2 serial RS232 interfaces with AK protocol

Digital via Instrument Controller 4210

1 Ethernet interface with InPort option installed with AK

protocol

Power supply:

100 115 VAC or 230 VAC, 50/60 Hz

Power consumption:

700 VA

Compressed air (for compressed air option):

~150l/min during purge

Compressed air quality required:

Grades 1.1.1 to 1.4.1 according to ISO 8573.1:2001(E)

Recommended connection pressure on the AVL Smoke

Meter: 5 to 8 bars at the measurement device input

Sample flow:

~ 10 l/min

Ambient conditions:

5 to 55 C / max.95 RH; without condensation

01 :https://www.avl.com/smoke-

meter
https://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meter


5/33

5

Sea level -500 to + 5000 m

Repeatability:Standard deviation 1 s = (0.005 FSN + 3 % of the

measured value @ 10sec intake time)5 Digital Psychrometer 01 No RAC

(621)

FEATURES:

Simultaneous display of %RH, Temperature and Dew

point or Wet Bulb or Probe Temperature Unique sensor cap design twists to closed position for

protection during storage

Switchable F/C temperature units with 0.1 resolutionAuto power off to save battery life

Includes external temperature probe SPECIFICATIONS:

Humidity:Range: 10 to 90%RHMax Resolution: 0.1%RH

Accuracy: 3%RHTemperature (internal):

Range:-4 to 122F (-20 to 50C)Resolution: 0.1

Accuracy: 1F or 0.6CTemperature (external):

Range: -4 to 158F (-20 to 70C)Resolution: 0.1

Accuracy: 1F or 0.6CDew Point: -90.4 to 122F (-68.0 to 49.9C)Wet Bulb: -6.9 to 122F (-21.6 to 49.9C)

0.1 URL:http://www.globalw.com/prod

ucts/rh305.html

6 Tongtester 04 No Mat.

Technology (301)

DISPLAY: 3999 Counts.

DCV: 0.4 / 4 / 40 / 400V 0.8%, 1000V 1.0%

ACV: 4 / 40 / 400V 1.0%, 700V 1.2% DCA: 400 / 1000V 3.0%

ACA: 400 / 1000V 3.0%

RESISTOR: 400 / 4k / 40k / 400k / 4MOhm 1.0%,40MOhm 2.0%

CAP: 4n / 40n / 400n / 4 F 4.0% FREQUENCY: 40Hz to 100kHz 2.0%

TEMPERATURE: -40C to 750C 1.0% DUTY CYCLE: 0.1% to 99.9% DIODE TEST CONTINUITY TEST

DATA HOLD POWER: BATTERY 6F22 ( 9V ) x 1

0.1 URL:http://www.sigmainstruments.com/p35_

digital_clamp_meter_tong_tester.htm
http://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.htmlhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.html


6/33

6

7 Optical Pyrometer 1no 01 No EMMP(503)

Measuring

Technology

Disappearing

filament, based on

original L&N

pyrometer

Measuring

Ranges

Range1 760C to

1240C/1400F to

2264F

Range 2 1075C

to 1760C/1967F

to 3200F

Range 3 1500C

to 2850C/2732F

to 5162F

Range 4 1900C

to 4200C/3452F

to 7592F

Wavelength 0.65 microns

(same as L&N

opticals and thecurrent N.I.S.T.

standard

Focal Range Standard 7" to

infinity

Optional close up

lens 2" to 6"

Optional long

distance magnifier24" to infinity

Small Target

Capability

0.04" or smaller

Accuracy/Li

nearity

% of reading 1

digit: Range 1-

0.25%

Range 2-0.3%;

Ranges 3 and 4-

0.4%

1.0 URL:http://www.spectrodyne.com/

DFP2000/specs.asp
http://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asp


7/33

7

Ambient

Temperature

Range

0C to 50C

Humidity 0 to 90% RH non-

condensing

Power Rechargeable

battery with "auto

off" battery saver

circuit

Display LCD with 1

resolution, field

changeable from

C to F or vice

versa

Housing Cast Aluminum

Tripod

Mounting

x 20 thread

Math

Function

Averages up to 10

readings on

demand

Output Analog output

10" Cable included

8 Thermocouple 01 No EMMP

(503)

Technical Details -

Type:R, S, BElement size (MI):0.30, 0.35, 0.4, 0.45, 0.5 (mm)(Non-MI):1.2, 1.6, 2, 2.5, 3.2 (mm)

Protection Sheath M:Ceramic (KER 710), 610, Inconel,Silicon carbide, etc.Configuration:Simplex / Duplex / Multipoints

Type Names of Materials Application Range

R Platinum 13% Rhodium (+) 0 to 1600C

Platinum (-)

S Platinum 10% Rhodium (+) 0 to 1600C

Platinum (-)

B Platinum30% Rhodium (+) 600 to 1600C

Platinum 6% Rhodium (-)

1.0

URL:

http://www.tempsens.com/noblemetalthermocouples.html
http://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.html


8/33

8

9 Pitot Tube 01 Set FM/HM(401)

. Accuracy 1% of actual flow rate - verified by

independent flow laboratories. Repeatability of measurement 0.1% Reynolds number. Minimum Re:1.2x104 Flow rate turndown typically 10:1 (100:1 of DP) The

restriction being the resolution of the transmitting deviceunder a square root relationship.

Maximum working pressure up to 500 bar with selected

models, materials and fittings. Maximum working temperature up to 600 deg. C with

selected models, materials and fittings Maximum viscosity 200 cp (mPas) Short upstream and downstream straight pipe lengths. Long term accuracy unaffected by wear.

0.2 URL:http://www.instrumatics.co.nz/

pitot-tubes/

10 Lux Meter 01 No MT (301) RANGE0 to 50000 Lux in 3 ranges of 0 to 2000, 0 to 20000 and 0 to

50000 Lux. Range selection may be provided on with front

panel

ACCURACY

5% 2 least counts.RESOLUTION

1 in the range of 0 to 2000 Lux.10 in the range of 0 to 20000 Lux.

100 in the range of 0 to 50000 Lux.DATA HOLD :Facility should be provided.DISPLAY

3 Digit, 7 segment LCD type of 12.5mm height.

X10, X100, data hold and low battery indications facilitiesPOWER REQUIREMENTS

9 volts battery.STANDARD ACCESSORIES

Battery, instruction manual/operating manual and carrying

case

0.01 URL:http://www.sigmainstruments.

com/p15_digital_lux_meter.htm

11 Anemometer 01 No MT (301) Range : 0.5 to 35 m/s. Low friction ball-bearing and carefully balanced vane

results in

accurate velocity measurement.

4 display mode : m/s. km/h, ft/min. knots.

Data hold for easy reading.

Ideal for use in checking air conditioning and heating

systems,

measuring air velocity, wind speed.Technical Specification : Air velocity : 0.4~30.0 m/s,

+2%+1d. 1.4~108.0 km/h, +2%+3d. 80~5910 ft/min,

+2%+2d. 0.8~58. 9 Knots, +2%+2d. Resolution : 0.1 m/s,

kn/h, knots or 1 ft/min. Battery : 1.5V x 4.

0.2 URL:http://www.sigmainstruments.

com/p15_digital_lux_meter.htm
http://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/http://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/


9/33

9

12 Stroboscope 01 No MT (301) Flash Range30 - 12,500 FPMFlash Brightness

1200 Lux (8"/20cm distance @ 4500 fpm)Accuracy

0.01% over entire range + 1 LSD

0.04 HzResolution

1 FPM over entire rangeDisplay

5-digit LCDDisplay Update

0.5 secondsFlash Energy

170 mJFlash Duration

< 9 sFlash Tube Life

200 million flashes (at 6,000 fpm)Flash Color Temp

6,000K - 6500KExternal Trigger

0-5 volt, DTL/TTL compatible 1/8" jackOptional* Trigger Signal Output

0-5 volt, DTL/TTL compatible 1/8" jack

* on PK2X-OT Model OnlyOperating Time

Battery, 2 hours

AC-Power, continuousBattery Type

Lithium Ion (Li-Ion)Battery Charger

AC Power Required, 100-240 VAC, 50/60 Hz

DC-Output, 9 VDC @ 2000 mA max

Charging Time, 4-5 hoursOvercharge Protection

Yes

Housing MaterialHigh Impact ABS PlasticReflector Material

AluminumTripod Mount

1/4-20, female insertOperating Temp.

32 to 104 F (0 to 40 C)

0.3 URL:http://www.checkline.com/stro

boscopes/PK2X
http://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2X


10/33

10

13 Digital Tachometer 1no 01 No FM/HM(401)

Specification

Display : 4.5 Digit LED with Leading Zero Blanking.

Measurement : a) PHOTO- TACHOMETERRange : 20 RPM to 75,000 RPM (Resolution 10 RPM

over 9,999 RPM)Distance :Operating from 3 to 5 inch using a Reflective

Photo-Reflective Sticker.

Light : Red Visible LED Light ( No Filament Bulb Used)b) CONTACT TACHOMETER

Range : 15 RPM to 25,000 RPM (Resolution 10 RPM

over 19,999 RPM). The Upper Speed is Limited by Error

caused by Rubber Roller Slippage.

c) SURFACE SPEED

Range : 2 TO 2,500 RPM For all Operations,

(CONTACT/NON-CONTACT) an LED indicates when the

RPM exceeds 10,000 & effectively a 'x 10' comes into

operation.

Power Supply : 4 standard Pencil Cells.Accuracy : 1 RPM 1 LSD below 9,999 RPM &

10 RPM 1 LSD above 19,999 RPMCalibration : Referred to Quartzz Crystal.

Sampling Time: 1 sec. over60 RPMCircuit : Micro Controller based LSI

Operation Temperature : 0 - 50C

0.1URL:

http://www.countronics.com/v

iew_our_products.php?id=37

14.01#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurement

Place :

Date :

Seal & Signature of Principal
http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37


11/33

11

FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)

Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)

Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected] Branch : Mechanical. Name of Laboratory : Heat Engine Lab

S

No.

Name of the

Equipment to

be procured

Quantity Curriculum

References

Specification (please give enclosure references) Cost of

equipm

ent (in

Lacs)


Product Brochure.

Printout of productspecifications giving

website

reference/URL.(Ple

ase give enclosurereference)

1 Educationalmodel ofLamont Boiler

01 No ThermalEngg (402)

Properly constructed non working model made of wooden and metal

parts showing necessary parts such as boiler, feed pump, checkvalve, Economiser, Evaporimeter, mud-drum, Circulatory Pump,super heater, main valve, Bleeder, Ash Pan, Grate, overall size about75 x 19 cm and height about 51 cm.

0.1 http://www.elabengineeringequipments.com/product-details/lamount-boiler-

model-257.html

2 Educational

model ofBenson boiler

01 No Thermal

Engg (402)

Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts such as Economiser, Superheater, Separate Evaporator and feed pump etc. Overall size about50 x 20 x 75 cm.

0.1 http://www.elabengineeri

ngequipments.com/product-details/benson-boiler-

model-258.html

3 Educational

model of

Loeffler boiler

01 No Thermal

Engg (402)

Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts such as Economiser, pressConvection, Super heater, Steam Outlet, Radian Super Heater, feedpump and circulatory Pump etc. Overall size about 50 x 20 x 70 cm.


ngequipments.com/produ

ct-details/loefer-boiler-model-259.html

4 Educational

model of boiler

mountings andaccessories

01 Set Thermal

Engg (402)

Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts.


ngequipments.com/catego

ry/Heat-Engine-Lab-Models-1-59.html

5 Diesel EngineTest rig for

performancemeasurement

01 No ThermalEngg (402)

Specification :-The test rig the rig comprises of a four stroke diesel engine coupled toa rope brake dynamometer / hydraulic dynamometer / electricaldynamometer. In rope brake dynamometer a water-cooled brakedrum along with spring balances, comprises rope brake. For hydraulicdynamometer a suitable capacity hydraulic dynamometer is provided.

2 http://www.elabengineeringequipments.com/produ

ct-details/twin-cylinder-diesel-engine-test-rig-
mailto:[email protected]:[email protected]:[email protected]://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlmailto:[email protected]


12/33

12

For Electrical dynamometer water rheostat/load bank is used asloading arrangement. With the help of various measurementsprovided the test ring can determine BHP, IHP mechanical andthermal efficiencies, air fuel ratio, specific, fuel consumption and heatbalance sheet at various loads.SPECIFICTIONS:1) Engine: "Comet" make or "Kirosker" make four stroke, single

cylinder, Water cooled, constant speed, vertical diesel engine,developing 5 BHP at 1500 rpm.

2) Dynamometer Rope brake: Rope wound around water-cooledbrake drum and spring balance.ORElectrical: Suitable capacity Generator and water rheostat/load bank

with load measurement.ORHydraulic Dynamometer can be also supplied instead of rope and

Electrical Dynamometer.3) Air intake measurement arrangement.4) Fuel intake measurement arrangement.5) Multichannel Digital Temperature Indicator.6) Water circulated exhaust gas calorimeter.The whole unit is mounted on a sturdy frame. A technical manual

accompanies the unit.SERVICE REQUIRED:

Watersupply about 10 lit/min.230 V, 5A. AC, supply with earthing connection.

A hand tachometer.Floor grace - 3m X 2m X 2 In height.

(A) With Rope Brake Dynamometer

(B) With Electrical Dynamometer

(C) With Hydraulic Dynamometer

618.html

6 Petrol Engine

Test rig forperformance

measurement

01 No Thermal

Engg (402)SPECIFICATIONS:[1] Engine - "Premier / Hindustan / Maruti" Make automotive petrol

engine (Reconditioned) Four stroke four cylinder, water cooled,developing 20 BHP at 3000 RPM. provided with battery and selfstarter.

[2] Dynamometer Rope Brake DynamometerORSuitable capacity dynamometerORElectrical dynamometer with load bank.

[3] Measurement provided ;

(i) Fuel intake measurement(ii) Air Intake measurement.(iii) Water circulated through engine jacket.(iv) Water Circulated exhaust gas calorimeter.

2 http://www.elabengineeri

ngequipments.com/product-details/multi-cylinder-

4-stroke-petrol-engine-test-rig-621.html
http://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.html


13/33

13

(v) Digital Temperature Indicator for Exhaust gas & watertemperature. Tachometer.(vi) Gauges for oil pressure & battery condition.(vii) Arrangement to cut off the ignition to conduct morse test.SERVICES REQUIRED:[1] Water supply 15 Lt/min.[2] 230 V, AC supply with earthing[3] Floor space - 3M X 2M X 2M height.(A) With Rope Brake Dynamometer

(B) With Electrical Dynamometer

(C) With Hydraulic Dynamometer

Total 4.7#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurementPlace :

Date :



14/33

14


(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)



Branch : Mechanical. Name of Laboratory : Applied Mechanics Lab

SNo.

Name of theEquipment to be

procured

Quantity Curriculum

References

Specification (please give enclosure references) Cost ofequipment

(in Lacs)


Product Brochure.

Printout ofproduct

specificationsgiving website

reference/URL.(Please give

enclosurereference)

1 Experimental setupfor AppliedMechanics lab

01 No App.Mecha

nics

(201)

EXPERIMENTAL SET UP COMPROSISES OF FOLLOWING

EXPERIMENTS:-

1.Universal Force Table

Full Specification ( Universal Force Table (Superior) ): It

consists of cast aluminum plate of 400 mm dia. graduated in 360

degrees. The table is fitted on a case iron stable base with

leveling screws to make the table in leveled position. It is possible

o fix the table in any desired position. Supplied will six set of

brass nickelled slotted weight each set containing nine weights

and one hanger of 50 gms. Complete with six sliding clamping

pulleys to fix up the same at any desired angle

2.Parallelogram of Forces Apparatus

Full Specification ( Parallelogram of Forces Apparatus ):It

consists of a wooden board of about 60x 50 cm. size with wall

brackets, two frictionless clamp pulleys, and three set of slotted

weights of iron, nickelled each set containing four iron nickelled

weight and one hanger of 50 gms.

3.Polygon of Forces Apparatus

Consisting of 750 x 700 nun board made of soft and seasoned

wood with brackets for fixing it with wall. It is supplied with

1.25 http://www.elabengineeringequipments.com
mailto:[email protected]:[email protected]:[email protected]://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/mailto:[email protected]


15/33

15

following accessories.

(A) Six frictionless pulleys of 5 cm dia mounted with frame so that

he pulley can be fixed at any position on the edges of the board.

Without foundation bolts.

(B) Six weight pans with chain, hook and string.

(C) A set of following weights of physical weight box of iron (duly

nickalled)

(i) 500 gm 05 Pcs.

(ii) 200 gm 05 Pcs.

(iii) 100 gm 05 Pcs.

(iv) 50 gm 05 Pcs.

(v) 20 gm 10 Pcs.

(vi) 10 gm 10 Pcs.

4.Inclined Plane Apparatus (Superior Quality)

Specification : The plane may be clamped at any angle up to 45

degree. The unit is complete with frictionless pulley, roller,

carriage and scale pan but without weights.

5. Polygon of Forces Apparatus

Specification:Consisting of a wooden board of about 75x 70 cmsize provided with two wall brackets and four adjustable

frictionless aluminum pulleys, complete with four one kilogram

weights and one scale pan.

6.Hooks Law Apparatus

Mirror Scale 12cm long

(b) S.S. Scale 12cm long

(c) Plastic Scale 12cm long

(d) Mirror Scale 15cm long

(e) S.S. Scale 15cm long

(f) Plastic Scale 15cm long

7.Compound Lever

Comprising of two iron beams connected to each other and fitted

on two different stands, well balanced with a scale pan. All metal

parts fitted on wooden polished base. Completed with 1 kg.

Weight and a physical iron nickelled weight box 1-50 gms.

8.Simple Jib Crane

Specification

Consisting of a tubular compression balance, pivoted about an

axis fitted to the base. The tie chain has an adjustable angle

bracket and fitted with a 10 kg extension balance. Complete on

wooden base with 1.2 meter jib. Without weights.

9. Geared Jib Crane


16/33

16

Specification

Strongly built frame mounted on a heavy cast iron and

comprising of single and double wheels. The gears are machine

cut and the jib is 1.2 meter high and tapered at both ends. The

purchase. Complete with cord and hooks. Without weights.

10.Rope Brake And Dynamometer

Specification

Consists of cast iron truly machined wheel of about 45cm. dia

with a groove. The steel axle is mounted on ball bearings to

minimize friction and assembled on a sturdy wooden frame.

Provided with an extension balance, rope and a set of slotted

weights and hanger.

11. Crony Brake Dynamometer

Specification

Consisting of a two blocks of wood clamped together with a

pulley in the center. The pulley is fitted to shaft moving on the

ball bearings. A lever bar is attached to one two blocks carrying

a weight hanger at the outer end. A spring balance is also fitted

to measure the load factor developed with the tightening of theblock with wing nuts and spring.

12. Pulley Blocks

Sturdy and accurate chromium plated. Pulleys and frame are of

all brass. Sheave Dia. 8cm,Width of Groove 6mm:-

(1) Single

(2) Double

(3) Triple

13. Differential Pulley Block Model

Specification:A cast aluminium double sheave pulley block

having the bigger pulley of 15 cm dia and the smaller one of 10

cm. Dia mounted on sturdy cast aluminium bracket and moving

freely on two steel cone bearings. A snatch pulley of 5 cm dia of

5 cm thickness groove is supplied with the unit. Without weight

or cord.

14. Pulley System Different Type

Specification

(A) First System Pulleys: With four single pulleys all brass of 5

cm with string and two pans but without pulley frame and without

weights.

(B) Second System Pulleys: With two triple long pulley (large

pulley 5 cm. dia, middle pulley 4 cm., and small pulley 2 cm. dia.)


17/33

17

all brass with two scale pans (but without pulley frame), without

weights.

(C) Third System Pulleys: Having 5 cm. dia four all brass pulleys

with two scale pans, (without pulley frame) and without weight

sets.

(D) Frame For Above: Pulley Frame with metal uprights but with

wooden base. Over all height about 80 cm.

15. Wheel and Differential Axle 20cmSpecification

Same as Cat No. 9056 but wheel is 20 cm in diameter and the

axle is in two steps of 10 & 5 cm respectively.

16. Wheel and Axle Simple Form

Specification

Comprising two polished wooden wheels with grooves 7. 5 cm

and 12 cm in diameter respectively, fixed rigid together and

mounted on steel centers on wooden base. Complete with cord

and hooks.

17. Screw Jack

SpecificationAll metallic construction accurately machine cut screw with a

pitch of 5mm carrying a double fanged turn table of about 20 cm

diameter. Fitted on a heavy cast iron base and complete with

two adjustable pulley, cord and hooks. Weights are not included.

18. Screw Jack (small size)

Specification

Small size, experimental model, an aluminium turned pulley of

about 10 cm dia is fitted on a screw jack fitted on a 12cm dia

metallic circular base with an adjustable pulley and a linear

vertical scale. Overall height of the model Is about 15 cm.

Without weights.

19. Worm and Worm WheelSpecification

An all metallic self contained apparatus useful for demonstrating

the efficiency of worm and wheel and also the principle of works.

Consisting of machine cut worm gear of 25 cm diameter,

carrying a metal drum on 12 cm diameter, and machine cut

worm on steel spindle carrying a 12 cm diameter pulley. The

whole arrangement is fixed on heavy cast iron bracket capable

to be a wall. Complete with effort pulley, string and hooks but

without weights.

(A) Single Purchase.


18/33

18

(B) Double Purchase.

(C) Triple Purchase. \

20. Deflection of Beam Apparatus.

Specification

Consisting of two knife edge end supports, a hanger with knife

edge, and a pointer moving over a graduated scale, complete

with scale pan and two beams, 120 cm in length. Without

weights.

21. Bending Of Beam Apparatus

Specification

It consists of a brass beam 9mm square one meter long resting

on the two knife edges fixed on heavy stands at the bases of

which are fitted leveling screw. A center knife edge with hanger

rests on the beam at the top of which is provided pin. Complete

with a cast iron slotted weights set having two weights of 1 kg,

two weights of kg and a hanger of 1kg.

22. Shear Force Apparatus

Specification

Consisting of two knife edge supports on stands and a seasonedwooden bar 180 cm long which is hinged at one point of its

length. The dynamometer is with an adjusting screw for restoring

line of beam under load conditions. Complete with three sliding

U shaped weights.

23. Bending Moment Apparatus

Specification

Consisting of a well seasoned wooden beam 180 cm long

hinged at a distance of 60 cm from one end, spring balance is

with adjusting screw so as to compensate the initial extension of

the spring and to keep the beam horizontal under any load.

Complete with three U shaped sliding weights and knife edge

end supports on stands.

24. Bar Pendulum or Compound Pendulum

Specification

Consisting of a steel bar 100 cm long bored at equal interval,

with two removable knife edges and a wall bracket.

25. Kater\'s of Reversible Pendulum

Specification

Comprising of 120x 1.2 cm brass bar with pointed ends, carrying

two sets of adjustable knife edges and large and small brass

weights. Two similar hard wood weights are provided. Complete

with cast iron wall bracket.


19/33

19

26. Inclined Plane Apparatus

Specification

It consists of a 15 x 60 cm. wooden board with glass top hinged

on an iron base to which a sector with graduated arc and vertical

scale is provided. The plan may be clamped at any angle up to

45 degree. A 5 cm. dia. frictionless pulley is attached to the end

by means of a clamp adjustable to any necessary position.

Complete with brass roller, cart and pan, but without weights.

27. Parallel Forces Apparatus (Dial type

balance)

Specification

Simple supported best type supported at its ends. For

verification of condition of equilibrium of parallel forces, law of

lever and forces on beam etc. Consisting of two compression

dial type balance. Dial type balance fixed on wooden polished

board, a wooden beam with steel back plate. Complete with two

stirrups, hooks and two 1kg weight.

(A) 10 Kg Dial Type Balance

(B) 20 Kg Dial Type Balance28. Parallel Forces Apparatus (Tubular spring

balance)

Specification

Simple supported best type supported at its ends. For

verification of condition of equilibrium of parallel forces, law of

lever and forces on beam etc. Consisting of two compression

thrust type 10 kg tubular spring balances fixed on wooden

polished board, a wooden beam with steel back plate. Complete

with two stirrups, hooks and two 1kg weights.

29. Compound Lever

Specification

Comprising of two iron beams connected to each other and fitted

on two different stands, well balanced with a scale pan. All metal

parts fitted on wooden polished base. Completed with 1 kg.

Weight and a physical iron nickelled weight

box 1-50 gms.

30. Bell Crank Lever (With Weight Attachments)

Specification

The apparatus consists of the following parts :

(i) A lever of well seasoned wood having horizontal arm 75 cm

and vertical arm 20 cm.

(ii) A spring balance of 10kg capacity with adjustable wing nut at


20/33

20

shorter end.

(iii) A set of slotted cast iron weights of 0.5 kg with necessary

one hanger (four sllotted weights and one hanger of 0.5 kg. Total

weight 2.5 kg The complete arrangement p mounted on steel

frame against wall. But without foundation bolts.

31. Bell Crank Lever(Without Weights)

Specification

A wooden right angled lever with fulcrum at the angle, the

horizontal arm is of 75 cm. and vertical arm is of 20 cm. a spring

balance with adjustable swing nut is attached to the shorter arm.

The lever arm is with scale and grooved at every 5 cm.

Complete with one sliding weight of 1 kg.

32. Cantilever Beam Apparat

Specification

Consists of a well seasoned wooden beam of L type shape, with

horizontal graduated horizontal arm 75cm and vertical arm of

20cm, with a spring balance of 10 kg capacity to make the

horizontal leg horizontal under any load. Complete with one

sliding slotted set weight set 100 gm to 1 kg.33. Jointed Roof Truss On Wheels

Specification

The apparatus is about 1. 2 meter in length and strongly

constructed in all metal, one leg is fitted on a immoveable

bracket and the other on rollers, Spring balances show tension

on the rod and the compression on rafters. Complete with

specially made dynamometer, chain and pan, but without

weights.

34. Simple Jib Crane

Specification

Consisting of a tubular compression balance, pivoted about an

axis fitted to the base. The tie chain has an adjustable angle

bracket and fitted with a 10 kg extension balance. Complete on

wooden base with 1.2 meter jib. Without weights.

35. Geared Jib Crane

Specification

Strongly built frame mounted on a heavy cast iron and

comprising of single and double wheels. The gears are machine

cut and the jib is 1.2 meter high and tapered at both ends. The

purchase. Complete with cord and hooks. Without weights

36. Coil Friction Apparatus


21/33

21

Specification

It consists of aluminium drum and three frictionless pulleys

mounted on wooden board 60x75 cm. in size. The pulleys can

be fixed to give a lap of 1/4 or 3/4 full circumference of drum,

complete with cord and two scale pans, but without weights.

Total 1.25

#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurementPlace :

Date :



22/33

22


(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)



Branch : Mechanical. Name of Laboratory : SOM Lab

S

No.

Name of the

Equipment to

be procured

Quan

tity

Curriculu

m

References

Specification (please give enclosure references) Cost of

equip

ment

(in

Lacs)


ProductBrochure.

Printout ofproduct

specifications

giving websitereference/URL.(

Please give

enclosurereference)

1 40 ton fully

computerizedUniversal

Testingmachine

01

No

SOM (305)

Max. Load1kN,2kN,3kN,5kN,10kN,20kN

25kN,30kN,50kN

Load accuracy1% (or 0.5% for special

order)

Deformationaccuracy 0.5%

Displacementresolution

0.001mm

Load speed 0.005-500mm/min

Spacing of grip togrip(mm)

750 640

Total crosshead 1075 1100

7.0 http://www.alibaba.co

m/product-gs/527199807/WDW_

E_Electronic_Computerized_Universal_Testin

g.html
mailto:[email protected]:[email protected]:[email protected]://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlmailto:[email protected]


23/33

23

travel (mm)

Space betweencolumns(mm)

420 500

Height(mm) 1737 1944

Width(mm) 780 840

Depth(mm) 577 600

Weight of loadframe(kg)

160 250

Power110V, 1 phase, 60Hz/220V, 1

phase, 50Hz

2 Spring

Testing

machine

01

No

SOM (305) Maximum load 5KN,1ton,2ton,option

Accurate grade 1 grade /0.5 grade

Effective measuring range0.2%~100%(1

grade)/0.4%~100%(0.5 grade)Measuring accuracy the value 1% / the value 0.5%

Tester resolutionMax load 1/200000,constant the

resolution

Load sensor

Basic configuration:sensor(max

load): one

Extended configuration:can add

more sensors

Effective testing width 450mm(can be widened according

1.0 http://www.alibaba.co

m/product-

gs/489521108/spring_compression_testing_m

achine_HZ_1010_.html
http://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.html


24/33

24

to customers requirement)

Effective tensile space

400,500,600mm(can be increased

the height according to customers

requirement)

Range of testing speed 0.001~500mm/min

Accruacy of displacementmeasurement

Tolerance: 0.5%/ tolerance:0.2%

Deformation of measured

system

(according to the

requirements )

Min span :10mm,Max range of

deformation :800mm

Extended deformation :Mix span:

25mm,50mm,100mm, range of

deformation :5mm,10mm,25mm

Accuracy of measured

deformation

Tolerance :0.5% (according to

requirement of customer to

choose the larger or small

deformation)safety Electronic-limit protection

Testing platform moving

device

Fast /slow two speeds to

control,can jog

Back to function of testing

platform

Manual or automatic

operation,After the test, the moving

iron return to

initial position with the highest

speed by manual or automatic

operation

Overload protection Overload 10%,automatic protection

fixture A set of tensile fixture

Machine size1200*530*1800mm(lenght*width*h

eight)

MotorPanasonic AC servo motor and

drive

Power supply 220V,50HZ,

power 0.75KW(depending on different


25/33

25

demand of force, using different

motor)

weight (about)500 Kg

3 HardnessTesting

machine(Brinell cum

Rockwell)

01No

SOM (305) 1- Measuring range: 20-88HRA, 20-100HRB, 20-70HRC

2-Test force: 588.4, 980.7, 1471N (60, 100, 150kgf)

3- Max. height of test piece: 170mm

4-Depth of throat: 130mm

5-Unit for display: 0.1HR

6-Power supply: 220V AC or 110V AC, 50 or 60Hz

7-Dimensions: 500 x 250 x 700mm

8- Weight: approx. 75kg

Measuring range:

machanical engineeing jabalpur knpc poly

Documents