ls393led inground - · pdf fileinground brisbane technology park, 18 brandl street, eight...

Inground

Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia✆ +61 7 3854 5000 | +61 7 3854 5001 | [email protected] | www.lumascape.com.au

LS393LED 170227Products and specifications are subject to change without notice

IK9IP68

LS393LED

LS393LED with round flush cover

5o15o

360o

Specifications

Source 3 W or 6 W LED□ White (4 000 K typical)■ Warm white (3 000 K typical)■ Blue (470 nm)Other colors by request

RGB

Lumen Maintenance (L70)

>60,000 hrsLimited by TM-21 x6 rule

Control Options PWM(0-10 V PWM and DMX PWM conversion available)

IP Rating IP68

Construction 316 marine grade stainless steel

Installation Types Pre-Installation BlockoutConcrete pour, drive-over & general use applications

Pre-Installation CollarDecks & grates

Direct BurialLandscapes, planters & special applications(consult factory)

Drive-over With OptiClear™ lens and pre-installation blockout (LS647-K)

Static Load Rating 8 267 lb (3 750 kg) with OptiClear™ lens and pre-installation blockout.(Load applied to center of glass across a 2" (50 mm) dia. area)

Impact Rating IK9 with OptiClear™ lens

Standard Inclusions Teflon coated cover screwsMicroAntiLeach™ cable entryInternal glare control louver

Ambient Operating Temperature

-4°F to 122°F (-20°C to 50°C)

Glass Temperature ≤149 °F (≤65 °C) HumanTouch™ compliant

Photometrics Refer to www.lumascape.com

Any luminaire can become hot - take care with appropriate use and placement

OPTIONAL

OPTIONAL

PWM DIMOPTIONAL

The LS393LED is a compact inground option featuring a 6 W LED module with output similar to a 50 W MR16. With options for line voltage input and dimming via Lumascape d5 driver technology, this inherently protected, compact luminaire is suitable for use in many locations where MR16-based luminaires cannot be used due to heat. Internal rotation and tilt adjustability ensures the most efficient light delivery can be set according to the site conditions.

easyglow tmhumantouchtm opticlear tm p wersync tmgripglass tm electropolish+ tmmicroantileachtm cooldrivetmpure pticstm

Inground



LS393LED Pre-Installation Blockout

Why Use LS647-K-87 Pre-Installation Blockout?

The LS647-K-87 acts as a blockout, and is intended for installation before the luminaire however it has other special functions. To simplify the installation, every LS647-K-87 is supplied complete with a 3-way junction box, inside which the installer can make all necessary connections, and allows the completion of all wiring even before the luminaire arrives on site. This method also ensures the luminaire itself is not damaged during concreting or other site works. Note: the junction box remains serviceable after installation. To complete the installation, Lumascape provides an IP68 connector, enabling a tool-free final connection from the luminaire to the branch circuit. In addition, this connector is readily detachable, allowing for off-site maintenance.

Why Use LS647-K-84 Pre-Installation Blockout?

The LS647-K-84 pre-installation kit (order separately) is ideal for use in applications where maximum flexibility for the type and location of branch circuit connections are required or where exact site conditions may be unknown. The LS647-K-84 is also for use with all applications requiring a color changing or dimmable lighting scheme. For use with the LS647-K-84, Lumascape provides the LS393LED complete with 3 m of factory-installed cable with MicroAntiLeach™ seal. This provides the installer with greater flexibility to determine the type and location of the branch circuit connection. This option is also 100% hard-wired, and does not feature the IP68 detachable couplings for off-site maintenance. All aspects of the luminaire itself are still field serviceable.

Connection Type '84' for LS647-K-84 Pre-Installation Blockout

Connection Type '84' for LS647-2 Pre-Installation Collar

Connection Type '87' for LS647-K-87 Pre-Installation Blockout

Ø7.0” (178 mm)11

.5” (

292

mm

)

9.4”

(240

mm

)

Ø4.3”

(110 m

m)

IP68 Connector & Junction Box

The luminaire is fitted with an IP68 connector, which attaches directly to the cable supplied with LS647-K-87, without the use of any tools. The cable is 1 m in length, and is factory assembled with a 3-way junction box – Remains field serviceable after installation.Not suitable for color changing or dimmable applications.

Pre-Install & Luminaire

Lens Options

OptiClear™ GlassGlass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Flush Cover Options

Flush covers for pre-installation use special seals and support bushes to ensure static loads up to 8 267 lb (3 750 kg) are properly supported. In order to achieve this drive-over rating, OptiClear™ or GripGlass™ must be used.

MicroAntiLeachTM CableFor connection to the branch circuit via junction box (by others) or other approved method.3 m length. For other length options, consult factory.

MicroAntiLeachTM CableFor connection to the branch circuit via junction box (by others) or other approved method.3 m length. For other length options, consult factory.

Pre-Installation Blockout Round Flush Cover

■ SS316: Polished ■ SS316: Brushed

Inground



LS393LED Pre-Installation Blockout

LUMINAIRE INPUT VOLTAGEDescription Code

110-240 V AC 50/60 Hz 01(1)

24 V DC 07(1)(2)

PWM Dimmable Driver, 24 V DC 27(2)

(1) Not available for RGB.(2) Requires remote power supply.

Product

CONNECTION TYPEDescription Code

IP68 Connector & Junction Box 87(1)

MicroAntiLeachTM Cable 84(2)

(1) Not suitable for color changing or dimmable applications. LS647-K-87 required - order separately.(2) LS647-K-84 or LS647-2 collar required - order separately. For all applications requiring LS647-2 collar, consult factory.

OPTICAL SYSTEMDescription Beam Code

Adjustable Narrow 14˚ NR(1)

Narrow Medium 20˚ NMMedium 25˚ ME(2)

Wide 40˚ WDLinear Horizontal 40 ̊x 10˚ LH(3)

Linear Vertical 10 ̊x 40˚ LV(3)

(1) Not available for RGB.(2) Recommended for best RGB color mixing.(3) Refer to beam orientation diagram.

HOUSING DEPTHDescription Code

9.4" (240 mm) 23

CABLE ENTRY LOCATIONDescription Code

Bottom Q

SOURCEDescription Wattage Color Code

LED 3 W White (4 000 K typ.) 3W4

Warm white (3 000 K typ.) 3H6

Blue (470 nm) 3B4

RGB 3M4



Blue (470 nm) 6B4

RGB 6M4

LS393LED

Source Lens CoverConnection

TypeOpticalSystem

23

HousingDepth

Q

CableEntry

Location

COVERDescription Material Finish Code

Round Flush Cover

Stainless steel

Polished MBrushed N

LENSDescription Code

OptiClear™ Very high optical purity and load strength A(1)

GripGlass™ OptiClear™ with slip reduction glazing process G(1)

(1) Suitable for drive-over.

Beam Orientation for the "LV" optical system

Beam Orientation for the "LH" optical system

Beam Orientations

LuminaireInput

Voltage

Inground



LS393LED Direct Burial

Recessed Cover


Round Flush Cover


Why Use Direct Burial?

Direct burial installation is ideal for landscaping areas or for special applications where depth is restricted. This type of installation also allows for maximum heat dissipation. The 316 grade Stainless Steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, and is also rated for use in concrete pour applications. Note: This installation type has no option for a pre-installation blockout.

Lumascape provides the LS393LED complete with 3 m of factory installed cable, supplied complete with MicroAntiLeach™ seal. This provides the installer with greater flexibility to determine the location of the electrical connection. This connection is also 100% hard-wired. All aspects of the luminaire itself remains field serviceable.

Consult factory for application advice prior to using this configuration.

5.2”

(133

mm

)

Ø6.0” (153 mm)Housing OD

Ø4.3” (110 mm)

Ø4.3”

(110 m

m)

0.6”(15 mm)

0.1”

(3 m

m)

5.2”

(133

mm

)

Ø6.0” (153 mm)Housing OD

4.3”

Ø6.8” (172 mm)Cover OD

Ø

(110 m

m)

Ø4.3” (110 mm)

0.6”(15 mm)

Recessed Cover Options

Use recessed cover for installation in soil, grass, pavers and other uneven surfaces where no cover overhang is desired.

Flush Cover Options

Use flush covers for installation in fine finished surfaces such as granite and marble. They can also be used in some suspended applications. The flush cover will conceal gaps between the luminaire and the surrounding surface.

Connection type '81' for 'Direct Burial' housing

Armoured Cable & Junction Box

The luminaire is factory-fitted with a 0.6 m armoured cable. Ensure terminations can be made within this length.

For other length options, consult factory.

Connection type '84'for 'Direct Burial' housing

MicroAntiLeachTM Cable

For connections to the branch circuit via junction box (by others) or other approved method. 3 m length. For other length options, consult factory.

Lens Options

OptiClear™ GlassGlass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Inground



SOURCEDescription Wattage Color Code



Blue (470 nm) 3B4

RGB 3M4



Blue (470 nm) 6B4

RGB 6M4

Product

LS393LED

Source Lens CoverConnection

Type

21

HousingDepth

CableEntry

Location

CONNECTION TYPEDescription Code

MicroAntiLeachTM Cable 84Armoured Cable & Junction Box 81(1)

(1) Not suitable for color changing or dimmable applications.

HOUSING DEPTHDescription Code

5.2" (133 mm) 21

CABLE ENTRY LOCATIONDescription Code

Side NBottom Q

LS393LED Direct Burial

LENSDescription Code

OptiClear™ Very high optical purity and load strength A

GripGlass™ OptiClear™ with slip reduction glazing process

G

COVERDescription Material Finish Code

RecessedCover

Stainless steel

Polished BBrushed H

Round FlushCover

Stainless steel

Polished DBrushed I

OpticalSystem

OPTICAL SYSTEMDescription Beam Code

Adjustable Narrow 14˚ NR(1)

Narrow Medium 20˚ NMMedium 25˚ ME(2)

Wide 40˚ WDLinear Horizontal 40 ̊x 10˚ LH(3)

Linear Vertical 10 ̊x 40˚ LV(3)

(1) Not available for RGB.(2) Recommended for best RGB color mixing.(3) Refer to beam orientation diagram.

LUMINAIRE INPUT VOLTAGEDescription Code

110-240 V AC 50/60 Hz 01(1)

24 V DC 07(1)(2)

PWM Dimmable Driver, 24 V DC 27(2)

(1) Not available for RGB.(2) Requires remote power supply.

Beam Orientation for the "LV" optical system

Beam Orientation for the "LH" optical system

Beam Orientations

LuminaireInput

Voltage

Inground



LS393LED Photometrics

PhotometricsPhotometric data is based on test results from a NIST traceable testing lab. IES data is available at www.lumascape.com. Note: No depreciation factor is applied to the data shown.

LS393LED4 000 K

14° Beam Angle

Power Input 7.8 W

Lumens 552 lm

Efficacy 71 lm/W

m Center Beam lx Beam Ø

2 1652 1.0 m

5 264 2.5 m

10 66 5.0 n

12 46 6.0 m

15 29 7.5 m

C 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C 80° C 90°

0° 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607

10° 1656 1646 1629 1618 1612 1614 1622 1633 1652 1658

20° 139 142 142 139 135 135 139 140 143 146

30° 23 23 23 22 22 22 23 23 23 22

40° 4 5 5 5 5 5 4 4 5 4

50° 0 0 0 0 0 0 0 0 0 0

60° 0 0 0 0 0 0 0 0 0 0

70° 0 0 0 0 0 0 0 0 0 0

80° 0 0 0 0 0 0 0 0 0 0

90° 0 0 0 0 0 0 0 0 0 0

6607

4955

3303

1650

10º0º20º

30º

40º

50º

60º

70º

80º

90º

C-0º

LS393LED4 000 K

20° Beam Angle

Power Input 7.8 W

Lumens 526 lm

Efficacy 67 lm/W


2 675 1.8 m

5 108 4.5 m

10 27 8.9 m

12 19 10.7 m

15 12 13.4 m

C 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C 80° C 90°

0° 2698 2698 2698 2698 2698 2698 2698 2698 2698 2698

10° 1776 1765 1751 1734 1715 1693 1672 1658 1665 1689

20° 256 272 282 273 254 242 237 233 231 239

30° 48 47 47 48 48 47 45 43 44 44

40° 26 25 24 22 17 17 17 16 17 17

50° 2 1 2 2 2 2 2 3 2 2

60° 0 0 0 0 0 0 0 0 0 0

70° 0 0 0 0 0 0 0 0 0 0

80° 0 0 0 0 0 0 0 0 0 0

90° 0 0 0 0 0 0 0 0 0 0

2698

2023

1349

674

10º0º20º

30º

40º

50º

60º

70º

80º

90º

C-0º

LS393LED4 000 K

25° Beam Angle

Power Input 7.8 W

Lumens 493 lm

Efficacy 63 lm/W


2 415 1.0 m

5 66 2.5 m

10 17 5.0 m

12 12 6.0 m

15 7 7.5 m

C 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C 80° C 90°

0° 1658 1658 1658 1658 1658 1658 1658 1658 1658 1658

10° 1166 1161 1155 1148 1141 1134 1130 1126 1132 1149

20° 429 431 432 432 432 430 428 425 427 438

30° 98 97 99 104 108 108 107 105 104 106

40° 19 20 21 22 24 27 27 26 24 23

50° 5 5 5 4 4 4 4 3 3 4

60° 0 0 0 0 0 0 0 0 0 0

70° 0 0 0 0 0 0 0 0 0 0

80° 0 0 0 0 0 0 0 0 0 0

90° 0 0 0 0 0 0 0 0 0 0

1658

1243

829

414

10º0º20º

30º

40º

50º

60º

70º

80º

90º

C-0º

LS393LED4 000 K

40° Beam Angle

Power Input 7.8 W

Lumens 446 lm

Efficacy 57 lm/W


2 216 1.4 m

5 35 3.5 m

10 9 7.1 m

12 6 8.5 m

15 4 10.6 m

C 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C 80° C 90°

0° 864 864 864 864 864 864 864 864 864 864

10° 743 736 735 733 733 733 734 739 747 744

20° 424 420 416 410 404 398 391 383 385 386

30° 139 144 143 138 130 119 109 109 118 123

40° 33 35 38 37 32 28 24 22 22 24

50° 7 5 5 4 3 4 6 7 7 8

60° 0 0 0 0 0 0 0 0 0 0

70° 0 0 0 0 0 0 0 0 0 0

80° 0 0 0 0 0 0 0 0 0 0

90° 0 0 0 0 0 0 0 0 0 0

864

648

432

216

10º0º20º

30º

40º

50º

60º

70º

80º

90º

C-0º

LS393LED4 000 K

10° x 40°Beam Angle

Power Input 7.8 W

Lumens 516 lm

Efficacy 66 lm/W

m Center Beam lx Beam W Beam L

2 651 1.5 m 0.5 m

5 104 3.8 m 1.1 m

10 26 7.7 m 2.3 m

12 18 9.2 m 2.7 m

15 12 11.5 m 3.4 m

C 0° C 10° C 20° C 30° C 40° C 50° C 60° C 70° C 80° C 90°

0° 2603 2603 2603 2603 2603 2603 2603 2603 2603 2603

10° 2389 2261 1983 1632 1302 1055 894 783 725 706

20° 1340 1122 742 463 287 186 136 109 91 86

30° 263 209 133 64 33 19 13 11 10 10

40° 26 24 15 8 5 3 3 2 2 2

50° 1 0 0 0 0 0 0 0 0 0

60° 0 0 0 0 0 0 0 0 0 0

70° 0 0 0 0 0 0 0 0 0 0

80° 0 0 0 0 0 0 0 0 0 0

90° 0 0 0 0 0 0 0 0 0 0

2603

1952

1301

651

10º0º20º

30º

40º

50º

60º

70º

80º

90º

C-0º C-90º

Illuminance at a DistancePolar Candela Distribution

Lumascape Lighting Industries Pty Ltd38-44 Enterprise Street, Cleveland, QLD 4163, AustraliaTel (07) 3286 2299 Fax (07) 3286 6599 Email [email protected]

LUMASCAPEHEAD OFFICE - QLDTel (07) 3286 2299Fax (07) 3286 6599

LUMASCAPESYDNEY - NSW

Tel (02) 9519 6860Fax (02) 9519 8834

LUMASCAPEMELBOURNE - VICTel (03) 9686 1900Fax (03) 9686 1700

LUMASCAPE USA INC.SAN FRANCISCO - CATel 1-(650)-595-5862Fax 1-(650) 595-5820

H.I. LIGHTINGLUMASCAPE AGENT - WA

Tel (08) 9321 5422Fax (08) 9321 5881

LIGHTING PARTNERS AUSTRALIALUMASCAPE AGENT - SA

Tel (08) 8232 0074Fax (08) 8232 0076

NQ LIGHTINGLUMASCAPE AGENT - NTH QLD

Tel (07) 4031 4490Fax (07) 4031 5933

ECC LIGHTINGLUMASCAPE AGENT - NZ

Tel (09) 379 9680Fax (09) 308 9328

Copyright ©2006 Lumascape Lighting Industries Pty. Ltd. ABN 21 010 572 773www.lumascape.com.au

SAFETY STANDARDSLumascape’s GripGlass™ pattern is specifically designed to maximise effective contact area achieved between an average pedestrian footprint and the slip resistant GripGlass™ treated area, while minimising the impact on luminaire output and performance.

Independent laboratories using German standard DIN 51130, have determined the GripGlass™ treated surface area achieves an R11 (or greater) performance rating, using the Oil Wet Ramp Test. This R11 rating relates to the surface area effected with the GripGlass™ treatment only (see diagram), and is not applicable to the entire luminaire including untreated glass area and surrounding stainless steel or brass cover.

A brief explanation of this test is as follows.

OIL-WET RAmP TEST mEThODTwo test persons, wearing standard test shoes, are used to determine the angle of inclination at which safe walking no longer occurs, after the pedestrian surface material being tested is coated with engine lubricating oil. The angles of inclination obtained are used to assess the friction characteristics of the test surface.

Rating Angle (degrees)

R9 ≥6 <10

R10 ≥10 <19

R11 ≥19 <27

R12 ≥27 <35

R13 ≥35

SLIP RESISTANcE RATINGS FOR TYPIcAL PEDESTRIAN SuRFAcEDescription Rating

External collonade, walkways and pedestrian crossings R10

Entry foyers hotel, office, public buildings – wet R10

Entry foyers hotel, office, public buildings – dry R9

Shopping centre excluding food court R9

Shopping centre – food court R10

Hospitals and aged care facilities – dry areas R9

Hospitals and aged care facilities – ensuites R10

Undercover concourse areas of sports stadium R10

The above information is for reference only. Ratings only refer to the treated area.

GRIPGLASS

LS343 recessed cover with GripGlass™ depicted

Indicative patternGripGlassTM

Ø24

0mm

steffena

ID

C1009 20-11-2006

ls393led inground - · pdf fileinground brisbane technology park, 18 brandl street, eight...

Documents