lockout signs & labels - wesco international...lockout signs & labels? did you remember to...
TRANSCRIPT
Lockout Signs & Labels
?
DID YOU
REMEMBER TO
REMOVE YOUR
LOCKS AND TAGS
FG 14 x 10 -FG - 10 x 7 -AL - 10 x 7AL - 14 x 10 -PL - 10 x 7 -PL 14 x 10 •SS 10 x 7 -SS - 7 x 5SS - 5 x 3V2 -
REMOVE ALL DOUBT£ LOCK IT OUT
SS - 2V4 x 4V2 - i
656816568243453434542587625877890928909389094
S8316
••Mil mi:!LOCK OUT FOR SAFETY
BEFORE VOU START
B-946 - 2:/ix 4l/i2 per card
E3SE3Z1MACHINE LOCKOUT
POINT
- 60176
B-946-2'/4X 4'/s- 601782 per card
RV/iiri'iikMLOCK OUT SWTCHESIEfOK
WINKING ON EQUIPMENT
B-946- 2 :/4x 4V; -601772 per card
BE SAFELOCK IT OUT
LOCK IT OUTBEFORE YOU STARTB-946- 2' /4x 4 : /2- 601682 per card
moii nil ramSMS in lite w« tint 11 HICK
B-946 - 2V.-. x 41/:- 601732 per card
LOCUTIONS ME:
B-946 - 7 x 10 - 60180
USE ran DEVICEHUE mmmK 11
WOPEMTEMIIISMIIT
B-946 - :2 per ca
VOLTAGESOURCE
'/. x 4V: - 60170d
B-946 - 2 x 2 - 601614 per card
WHEN LOCKED OUTDO NOHOW
B-946 - 2Vax 4V;2 per card
-60171
THIS DISCONNECT
DOES NOT REMOVE
AU. POWER FROM PANEL
SS - 2V, x 4'/> - 88320
• :[»H[H=«In Accordance win OSHA Standard1910.147, all equipment, machines andD'ocesses snail Be locked out prior toservicing.LOCkoul procedures are posted iti theDpeiating area and/or Dy trie mamenergy source o* eacti machineir you have any Questions aoout theloCkou! procedures, oiease see pursupervise' or !he Safety Director.
Triis: e slnclly enforced
FG - 20 x 14 - 65511AL - 14 x10 - 43519PL - 14 x10 - 25922
B-946 • 21/! x 4V? - 601742 per card
B-946- 7 x 10-60179
B-946-2 :Ax 4V:-601752 per card
MSIEKMKIIUKHBoniNBiaiaa
MM (TIME
B-946 - 2V4 x 4Vz • 601672 per card
Pair your lockoutsigns and labelswith Brady'sLockout/ Tagouttags and devices toensure safety.
B-946 - 2 x 2 - 601624 per card
mumWHEN 1MB HITB-946 - 2JA x 4% - 601722 per card
Machine & Operat ionalMore than 170 stock legends available in various sizes
Signs meet various OSHA Standards for safety
Available in fiberglass, aluminum, plastic or self-sticking materials
Do Not Operate Press Without Guard In Place 1910.145(c)(2)Caution signs are to be used to indicate a possible hazard againstwhich proper precautions should be taken. According to 1910.212,machine guarding must be provided to protect the operator or otheremployees in the machine area from hazards created at the point ofoperation, at ingoing nip points and near rotating parts. The cautionsign in this situation serves as a reminder of the hazards associatedwith the nip points on the press.
Only Non-Sparking Tools 1910.107(g)(2), (m)(2)Only non-sparking tools shall be used in any area where organicperoxides are stored, mixed or applied.
Clearance Limits 1910.176(e)Clearance signs to warn of clearance limits shall be provided.
Hot Metal 1910.252(b)(4)(vii)After welding operations are completed, the welder shall mark thehot metal or provide some other means of warning other workers.
56 HEALTH AND SAFETY SIGNS
BEFORE WORKING ON ANYMACHINE. BE POSITIVE
DISCONNECT AND STARTINGSWITCHES ARE OPEN AND
WARNING TAGS ARE IN PLACE
KEEP ALL GUARDSIN PLACE
WEAR GOGGLES
FGALALPLPLSSSS
10 x 147 x 1010 x 147 xlO10 x 147 xlO10 x 14
69763423824238322859228608575485755
FGALALPLPLSSSS
EVERY MACHINEIN THIS DEPARTMENT
IS DANGEROUS
FGALALPLPLSSSS
10 x 147 x 1010 x 147 x 1010 x 147 x 1010 x 14
69218423844238522861228628575685757
10 x 147 x 1010 x 147 x 1010 x 147 x 1010 x 14
69309411394114022575225768496984970
About Safety Signs
ASME (ANSI Z535) and theOccupational Safety and HealthAdministration (OSHA 1910.145)Specifications for Accident PreventionSigns require the use of Safety Signsto indicate and define specifichazards that, without identification,may lead to accidental injury toworkers and/or the public or toproperty damage.
Use the "Sign Selector Guide" belowto determine what sign classificationis necessary for your application.
Indicates an immediatehazard: a hazardcapable of producingirreversible damageor injury.
Indicates a potentiallyhazardous situationwhich, if not avoided,could result in deathor serious injury.
FHIM:MJ;J j
mmmm mm[WARNING!
JIAWARNING
CAUTIONIA CAUTION]
• flMKM
mintnm
i*mtni:iii
Indicates a potentiallyhazardous situation;a hazard capable ofresulting in severe butnot irreversible injuryor damage.
Provides information ofa general type in orderto avoid confusion ormisunderstanding.
Includes noticesof general practiceand rules relatingto health, first aid.medical equipment,sanitation,housekeepingand general safety.
Fiberglass Signs - B-120• Made of our highest quality,
longest lasting sign material
• Will not peel or fade• Guaranteed for 15 years• Ideal for outdoors or harsh
environmentsLearn more about Fiberglass Signson page 31.
Aluminum Signs - B-555• Superior abrasion and chemical
resistance, indoors or out
• Protected graphics keepmessage clear
• Weather and sunlight resistant• Stands up to spills, washdowns
and cleaningsLearn more about Aluminum Signson page 43.
Plastic Signs - B-401• Economically priced, perfect
for light duty or temporary use
• Overlaminated graphics for durability• 1 to 2 year outdoor life• Over 2000 stock legends
Learn more about Plastic Signs on page 53.
Self-Sticking Signs - B-302• Bright graphics on flexible material,
sticks to almost any shape orsurface
• Lasts up to 8 years outdoors,longer indoors
• Stands up to repeated spillsand cleanings
• Permanent adhesive holds whereothers fail
Learn more about Self-Sticking Signson page 66.
Custom Order, Engraved Signs - B-l• Durable acrylic engraved with your
custom message and shipped fast
• Engraved message stays readablefor years
• Flexible acrylic material conformsto surface
• Not available with OSHA/ANSIheaders
• Custom orders shipped within24 hours
Learn more about Custom EngravedAcrylic Signs on page 76.
Or, make your own signs with Brady'snewest Make-lt-Yourself system -PowerMark™ - on page 152.
Signmark offers a sign material for virtually every application. Whether the sign is used indoors oroutdoors, in mild or harsh environments, we have the material to match your application. Select theright sign for your application dependent upon the factors listed in the table below.
Material DescriptionProtected Self- Indoor (I) Average OutdoorGraphics Sticking Outdoor (0) Durability (Yrs)
ChemicalResistance
AbrasionResistance
Upper TempLimit
B-l Rigid Engraved Acrylic No
B-120 .100" FiberglassReinforced Plastic
B-235 Semi-Gloss Paper
Yes
No
5-8
15
0
Good
Excellent
Poor
Good
Excellent
Poor
190°F. 88'C
190"F. 88'C
150°F. 65'C
B-302 Sub-surfacePrinted Polyester Yes
B-401 ,060" OverlaminatedPlastic Yes
B-467 Phosphorescent SurfacePrinted Vinyl Film No
B-555 .040" OverlaminatedAluminum Yes
B-946 Premium GradeVinyl Film Tape No
B-959 Reflective Sheetingon Aluminum Signs No
B-997 Reflective Sheeting No
Yes I/O
No I/O
Yes I
No I/O
Yes I/O
Excellent Excellent 212°F, 100'C
Up to 2
Good
Good
Good
Good
150=F. 66'C
160°F. 70°C
Excellent Excellent 212'F. 100°C
5-8
5-8
Fair
Good
Good
Good
Good
Good
180'F. 82'C
200°F. 93°C
200'F, 93'C
14 HEALTH AND SAFETY SIGNS
Machine & Opera t ional
CAUTIONCLEARANCE
FT. IN.
CAUTION
DO NOT OPERATEMm Working on Repair*
CAUTION •II CAUTION M CAUTIONDO NOT PLAY
ONOR AROUND
EYE PROTECTIONREQUIRED
SAFETY GLASSES
FG
ALALPLPLSSSS
• 10 x14 - 70243(use 1" numbers!7x 1010 x 147 x 1010 x 147x1010 x 14
423864238722863228648577785778
FGALALPLPLSSSS
7x107 x 1010 x 147 x 1010 x 147 x 1010 x 14
47067423964239722873228748578985790
FGALALPLPLSSSS
10 x 147x 1010 x 147 x 1010 x 147x 1010x14
70280424044240522881228828579985800
FGFGALALPLPLSSSS
7x1010 x 147 x 1010 x 147x 1010 x 147x1010 x 14
7580247100411484114922584225858498184982
CAUTIONCONVEYOR MAYSTART WITHOUT
WARNING
CAUTIONDO NOT OPERATE
THIS MACHINEWITHOUT
GUARDS IN PLACE
CAUTION Bl CAUTIONDO NOT PUT YOUR
HANDS IN THIS PRESSUNDER ANY CONDITIONS
FORK LIFT TRUCKSGO SLOW
FGALALPLPLSSSS
10 x 147 x 10
10 x 147x10
10 x 147 x 10
10 x 14
69068423884238922865228668577985780
FGALALPLPLSSSS
10 x 147x1010 x 147 x 10
10 x 147 x 10
10 x 14
70278423984239922875228768579185792
FGALALPLPLSSSS
7 x 107x1010 x 147x1010 x 147 x 1010x14
69138424064240722883228848580185802
FGALALPLPLSSSS
10 x 147x1010 x 147x 1010 x 147x 1010 x 14
69258424184241922895228968581985820
CAUTION II II CAUTIONCUTTING AND WELDINGPERMIT REQUIRED IN
THIS AREA
DO NOT OPERATEWHEN WEARING GLOVES OR
LOOSE CLOTHING
CAUTIONDO NOT
WALK ONCONVEYORS
CAUTION
HOT
FGALALPLPLSSSS
10 x 147 x 10
10 x 147 x 1 0
10 X 147 x 10
10 x 14
69079423904239122867228688578185782
FGALALPLPLSSSS
7x107 x 10
10 x 147 xlO10x147 x l O
10 x 14
47058424004240122877228788579385794
FGALALPLPLSSSS
10 x 147 x 1010 x 147 x 1010x147 x 10
10 x 14
70286431714317225594255958507985080
AL - 10 x 14 - 43500
CAUTION II II CAUTION I II CAUTION
CAUTIONHOT
KEEP AWAY
DO NOT ATTEMPT TOADJUST MACHINERY
WHILE IN MOTION
DO NOT OPERATEWITHOUT
EYE PROTECTION
DO NOT WEARLOOSE CLOTHING WHILE
OPERATING THIS MACHINE
FGALALPLPLSSSS
10 x 147 x 1010 x 147 X 1010 x 147 x 1010 x 14
69090423924239322869228708578385784
FGFGALALPLPLSSSS
7 xlO10 x 147 x 1010 x 147 x 1010 x 147 xlO10 x 14
4705947097411454335022581257738497584976
FGALALPLPLSSSS
10 x 147x 1010 x 147x 1010x147 x 1010 x 14
69171424144241522891228928581185812
FGALALPLPLSSSS
10 x 147x 1010x147 xlO10 x 147x1010 x 14
69031424204242122897228988582785828
CAUTIONDO NOT ENTER
WHILE MACHINERYIN MOTION
CAUTIONDO NOT OPERATEWITHOUT GUARDS
CAUTIONEQUIPMENT
OPERATED BYREMOTE CONTROL
CAUTIONINSPECT SLINGS
BEFORE USE
FGALALPLPLSSSS
10 x 147x1010 x 147 x 1010 x 147 x 1010 x 14
69102406254062622061220628401084011
FGALALPLPLSSSSSS
7 x 107x1010x147 x 1010x143Vz x 57 xlO10 x 14
4706042402424032287922880877918579785798
FGALALPLPLSSSS
10 x 147 x 1010 x 147 x 1010 x 147x1010 x 14
70322424164241722893228948581385814
FGALALPLPLSSSS
10 x 147x 1010 X 147x 1010 x 147 x 1010 x 14
75810424244242522901229028583185832
KEEP CLOSED
SS - 3L/:x5 - 84701SS - 7 x 10 - 84702SS - 10 x14 - 84703
CAUTIONKEEP HANDS
OFF
FGALALPLPLSSSS
10 x 147x1010 x 147 xlO10 x 147 x 1010 x 14
70406424264242722903229048583885839
CAUTIONKEEP OUT
FROM UNDERCRANE LOADS
FGALALPLPLSSSS
10 x 147x1010 x 147x1010 x 147 x 1010 x 14
70409424304243122907229088584485845
CAUTION
aLOCKOUTFOR
SAFETY
FGFGALALPLPLSSSSSSSS
10x714 x 1010 x 714 x 1010x714 x 105 x 3 1/27x510 x 714 x 10
6557165570424324243322909229108584685847
85849
CAUTIONLOOKOUT
FOR CONTACT HAZARDSAND MOVING PARTS
OF MACHINERY
FGALALPLPLSSSS
10 x 147 x 1010 x 147x10
10 x 147x10
10 x 14
69343424364243722913229148585485855
FG-Deluxe Fiberglass(B-12Q)
AL-Standard Aluminum(B-555)
PL-Economy Plastic SS Self Sticking(B-401) (B-302)
Vinyl Film(B-946) Price Per Card
2 x 22V< x 4Va $ 1.08 $5.673V2 x 5 $ 1.515x 7 $2.957 x 10 $6.6410 x 14 $14.17 $13.37 19.41
CAUTIONLOW
HEADROOM
FGALALPLPLSSSS
10 x 147 x 1010 x 147 x 1010 x 147 x 1010 x 14
75126424384243922915229168585685857
CAUTIONLOW OVERHEAD
CLEARANCE
FGALALPLPLSSSSSS
10 x 147 x 1010 x 147 x 1010 x 143V2 x 57 x 10
10 x 14
7427042440424412291722918877908585885859
roam MMMACHINE STARTSAUTOMATICALLY
KEEP HANDS AWAY
FGALALPLPLSSSS
10 x 147 x 1 0
10 x 147 x 1010 x 147x1010x14
69349424424244322919229208586085861
CAUTIONONLY
AUTHORIZED PERSONNELALLOWED TO OPERATE
THIS EQUIPMENT
FGALALPLPLSSSS
7x107 x 1010 x 147x 1010x147 x 1010 x 14
70465424444244522921229228586685867
CAUTION
OPEN SLOWLY
FGALALPLPLSSSS
10 x 147x1010 x 147 x 1010 x 147 x 10
10 x 14
73444410814108222517225188470884709
14x20 $25.04
HEALTH AND SAFETY SIGNS 57
Technical Data Labelstocks & Tapes
MaterialB-2
B-88B-98B-99B-156B-205B-208B-235B-302
B-308B-309B-467B-468B-502B-507B-530B-545B-546B-549B-569B-570B-571B-577B-578B-579B-580
B-581B-584B-587B-674B-681
B-704B-725B-736
B-744B-745B-746B-752B-782B-790B-819
B-822B-824B-826B-834B-835B-859
B-88 7B-916B-927B-928B-933B-946B-950B-957B-997
Descriptionanodized aluminum tag with acrylic adhesivenon-printable plastic backed cloth tapecomputer-printable paper labelscomputer-printable polyester labelsfoam tape, adhesive coated both sidesnon-supported transfer adhesivesupported low temperature transfer adhesivesemi-gloss paper label stocksurface printed polyester labelwith polyester overlaminatepolyester label stock for thermal printingpolypropylene label stock for thermal printingphosphorescent surface printed vinyl filmphosphorescent vinyl warning tapecomputer printable plastic coated cloth tapeprintable plastic coated cloth tapetamper proof label for thermal printingpremium paper label stock for Labelizer PLUS Systemdirect thermal transfer paper for Labelizer PLUS Systempolyester label stock for Labelizer PLUS Systempolyester label, Labelizer PLUS Systempolyester label stock for Labelizer PLUS Systempolyester label stock for Labelizer PLUS SystemLetterizer tapereflective Letterizer tapepolyester label stock for Labelizer systemoutdoor marking film permanent adhesive forLabelizer PLUS Systemrepositionable vinyl filmretroreflective sheetingphosphorescent vinyl filmclear polyester overlaminate acrylic adhesivesurface printed polyester labelwith polyester overlaminatecomputer printed vinyl film, laminategeneral purpose vinyl roll tapesurface printed film, inner mounted with pressuresensitive adhesivelaser printable polyesterlaser printable vinyllaser printable paperdiamond grade reflective tapevinyl filmhigh intensity reflective pressure sensitive filmsubsurface printed vinyl with anti-slip vinyloverlaminatecomputer printable flexible vinyl tapevinyl film with polyester overlaminatecold temperature adhesive computer printable vinylsurface printed reflective vinyllow halide tape, surface printedmagnetic strip with acrylic adhesive strip
flexible reflective sheetinggrit coated polyester tapetamper resistant acrylic film tapelow temperature vinyl label materialvinyl film with acrylic adhesiveoutdoor marking film permanent adhesiveglossy subsurface patterned warning stripe tapereflective sheeting with permanent acrylic adhesivelow temperature reflective sheeting
Thickness(mils)8
11
5
4
70
2
5
4
6
3
3
9
9
8.5
10
2.5
4
4
3
3
5
3
5
7
1.5
5
13
14
9
2.5
5
6
5
3.5
3.5
4.5
4.2
20
3
1017
5
6
5
6
3
31.5 adhesive61.5 strip7
27
3.5
5
5
5
6
7
7
LabelTypeP
P
DP
DP
P
DP
PP
P
PR
R
DP
P
P
P
RP
P
DP
P
PP
PP
P
PP
P
P
P
DP
P
P
P
RR
P
D
PP
PP
DPPPPD
D
Suitabilityfor RoughSurfaces2
1
2
2
1
21
2
1
3
1
2
2
1
1
2
2
3
3
3
3
3
2
3
3
2
2
3
2
2
2
3
2
1
1
1
1
1
2
1
2
2
2
2
1
2
3
2
3
2
2
2
2
2
3
3
Upper Temp.Limit320 F. 160'C175 F, 79'C160' F, 70'C210" F, 100'C180 F, 82'C210' F, 100'C150' F, 65'C150' F, 65'C230' F, 110'C
230' f, 110'C150' F, 65 C160' F. 70'C175 F. 80 C150' F. 65'C190 F. 88"C193' F. 90'C160' F. 70'C160' F, 70'C212' F, 100'C230' F, 110'C230' F, 110'C212" F, 100 C270' f, 130'C200' F. 93'C248' F, 120'C
ISO' F, 82'C180' F. 82'C200' F. 93'C175' F. 80'C190' F. 88'C230' F. 110'C
180' F, 82'C175" F. 79"C212'F. 100'C
267" F. 130' C180' F, 82'C200' F. 93'C200' F, 93'C225' F, 107'C175' F, 80'C140' F, 60'C
ISO' F, 82'C180' F. 82'C200' F. 93'C175" F. 80'C180' F. 82'C150' F. 65'C
200' F. 93'C200" F, 93'C250' F. 121'C200' F. 93 C200' F. 93'C180" F. 82"C175" F, 79'C200" F, 93'C200" F, 93"C
MinimumApplicationTemp.40 F, 4'C40 F. 4'C35" F. 2'C45' F, 7'C50' F, 10'C50' F, 10'C-70' F, -57'C50' F, 10'C0" F. -18'C
50' F. 10'C50' F. 10'C50" F. 10"C50" F, 10 C50" F. 10 C50' F. 10"C50' F. 10'C50' F. 10'C30' F, -1'C-10' F, -23'C0' F. -18'C50" F. 10'C50' F. 10' C50' F. 10'C0' F. -18'C35' F, 2 C
0" F. -18'C50' F. 10'C50' F. 10'C50' F, 10'C40 F. 4"C0' F. -18 C
0' F. -18 C50' F. 10'C50 F. 10 C
0" F. -18"C10" F. -12'C25' F. -4'C40' F. 4'C60' F. 16'C-10' F. -23'C50' F. 10'C
50' F, 10"C50' F. 10'C0' F. -18'C50" F. 10"C50' F. 10'C50' F. 10'C
50' F, 10"C50' F. 10'C50' F. 10'C0' F. -18'C50' F. 10 C0' F. -18'C50' F 10'C50' F, 10'C'-10' F. -23'C
AverageOutdoorDurability (years)3-5
up to 20
2
2-3
3-6
2
0
5-8
up to 2NA
up to 2up to 2up to 2up to 23-5
0
0
up to 1up to 20up to 15-8
4-6
0
5
2
4-6
up to 2up to 25-8
5
up to 22-3
0
3-5
0
7
5-8
4-6
0
2
5
27
3-5
up to 2
5-8
2
5
22 4
5
up to 25-8
4-6
Definitions and KeyP-Permanent: Cannot be removed after adhesion to surface has stabilized without
distorting the label or leaving at least partial adhesive residue behind.R-Removable: Can always be removed without distorting the label
or leaving adhesive residue behind.D-Destructible: Cannot be removed in one piece.Suitability for Rough Surfaces: 1 - Good 2 - Average 3 - PoorUpper Temperature Service Limit: Temperature above which material will fail in
long term use.Minimum Application Temperature: Lowest temperature at which you can apply
the label to a clean, dry. smooth surface.
J54 TECHNICAL DATA |
Average Outdoor Durability: Average expected outdoor life of product will dependon user definition of failure, climatic conditions, mounting techniques, materialcolor, and printing inks used. Call Brady Signmark for specific recommendations.
Chemical Resistance: Chemical resistance information can be obtained fromspecific materials Technical Data Sheets.
Surface Preparation for Application: Pressure sensitive adhesives perform beston smooth, clean, dry surfaces. Use these guidelines for preparing surfaces forapplication:
1. If surface is contaminated with oil or grease, clean it with an evaporativesolvent such as methyethylketone.
2. If surface is dirty, clean it with #600 emery cloth or 0000 steel wool,followed by solvent cleaning as above.
3. Rough surfaces can be smoothed with sandpaper, then with steel wool, andsolvent cleaned to remove residual dirt.
4. A final cleaning with a dry. lint-free cloth is advised to remove any solvent film.