Our LFG series linear LED light fixtures are a simple, yet elegant solution for wall washingand grazing applications where crisp, single color light is desired along a wall or ceiling. The use of elliptical optics ensures smooth lighting across the entire surface with optimaloverlap between LEDs, and little spill or throw beyond the illuminated plane.

Using high brightness surface mounted LEDs, the LFG series comes in multiple power levelsand provides up to 900 lumens per linear foot. Colors include 6 tones of White, in addition to single colors of Red, Amber, Green, Blue. A color-changing RGB version is also available.

The fixture consists of our GRAZE light engine mounted onto an aluminum fixture, which acts as both the mounting apparatus, as well as a heat sink to ensure maximum lifespan. The fixture is custom made in 12" or 16" increments and includes quick connectors at bothends for ease of installation. Operating at 24VDC, the LFG also features on-board constant

current drive topology, which ensures consistent brightness along the entire run, precise drive current, and maximum life expectancy. Dimming is achieved with YYZ's dimming compatible power supplies. Indoor applications only.

with Swivel Base option with Mounting Channel option

LFG series

Electrical Specifications:

Amperage / Foot: 500 mA 200 mA 300 mA 400 mA

Lumens (5000 K) ° 900 lm 360 lm 540 lm 720 lm

12.0W 4.8W 7.2W 9.6W

Operating Voltage: 24VDC (+/- 10% maximum range)

Operating Temperature: -20ºC - + 55ºC

IP Rating: IP 20 Indoor, Dry locations - or IP66 Outdoor optional

Light Source: Top grade surface mount LED with variable drive current

Color Range: Single Color Operation. Standard + custom colors available.

Viewing Angle: 6°x 40° (elliptical pattern)

Fixture Connection: AMP Minifit connector allows for end-to-end daisy chain

Maximum Fixture Run: 6 ft (2m) 20 ft (6m) 13 ft (4m) 10 ft (3m)

Control Specifications:

0~10V Dimming: Connects to YYZ Lighting Dimmer Drive to accept 0~10-V dimming

ELV Dimming: Connects to YYZ Lighting Dimmer Drive compatible with 3rd party

rdprotocol from 3 party controls such as Lutron.

dimmers from Lutron, Leviton, etc...

DMX Dimming: Connects to YYZ Lighting ColorDriveDMX or ColorDrive-Repeater

ColorDrive controls accept DMX data input from 3rd party controls

All Controls: Feature 90 VAC – 260 VAC primary input capability with regulated

24VDC output as required by LFG series fixtures

All fixtures connected to a Dimmer Driver will perform the same

functions. Individual fixture control is not available.

LFG series

Mechanical Specifications:

Length: 12.00” (304.0mm) or custom up to 96" (2,430mm)

Width: 1.75” (44.80mm)

Height: 1.00” (25.4mm) fixture // 45.2mm w Clip/Track // 57.25mm w Bracket

Housing: Anodized aluminum extrusion

Mounting: Mounting screw (though Clips, Track or Bracket) or 2-way tape (Track)

Weight: 0.33 lb (0.15 kg)

RD = Red 625nmAM = Amber 595nm

GR = Green 535nm

BL = Blue 470nm

## = Custom

WT65 = 6500K

WT55 = 5500K

WT41 = 4100KWT35 = 3500K

WT30 = 3000K

WT27 = 2700K

Ordering Information:

Series LED Color Fixture LengthPower Type Mounting Options

LFG-I = IndoorLFG-O = Outdoor

12" = Standard4.8W Swivel Bracket AMP Connectors## = Custom 7.2W Mounting Channel IP Connectors

(6" ~ 96")9.6W12.0W

LFG-I XX XXXX XX XX

304mm( 12.0" )

* OR CUSTOM *

40.0mm( 1.58")

* when swiveled to 90° *

45.0mm( 1.77")

* with clip/channel *

Mounting Clip and Channelmade from same extrusion.

Channel = continuousClip = Cut to 4" size

Mounting Clips Custom Wiring( Contact Rep )

44.80mm( 1.75" )

57.25mm( 2.25" )

45.20mm( 1.80" )

25.40mm( 1.05" )

Mechanical Details:

LFG series