Our LFG series linear LED light fixtures are a simple, yet elegant solution for wall washingand grazing applications where crisp, single color light is desired along a wall or ceiling. The use of elliptical optics ensures smooth lighting across the entire surface with optimaloverlap between LEDs, and little spill or throw beyond the illuminated plane.
Using high brightness surface mounted LEDs, the LFG series comes in multiple power levelsand provides up to 900 lumens per linear foot. Colors include 6 tones of White, in addition to single colors of Red, Amber, Green, Blue. A color-changing RGB version is also available.
The fixture consists of our GRAZE light engine mounted onto an aluminum fixture, which acts as both the mounting apparatus, as well as a heat sink to ensure maximum lifespan. The fixture is custom made in 12" or 16" increments and includes quick connectors at bothends for ease of installation. Operating at 24VDC, the LFG also features on-board constant
current drive topology, which ensures consistent brightness along the entire run, precise drive current, and maximum life expectancy. Dimming is achieved with YYZ's dimming compatible power supplies. Indoor applications only.
with Swivel Base option with Mounting Channel option
LFG series
Electrical Specifications:
Amperage / Foot: 500 mA 200 mA 300 mA 400 mA
Lumens (5000 K) ° 900 lm 360 lm 540 lm 720 lm
12.0W 4.8W 7.2W 9.6W
Operating Voltage: 24VDC (+/- 10% maximum range)
Operating Temperature: -20ºC - + 55ºC
IP Rating: IP 20 Indoor, Dry locations - or IP66 Outdoor optional
Light Source: Top grade surface mount LED with variable drive current
Color Range: Single Color Operation. Standard + custom colors available.
Viewing Angle: 6°x 40° (elliptical pattern)
Fixture Connection: AMP Minifit connector allows for end-to-end daisy chain
Maximum Fixture Run: 6 ft (2m) 20 ft (6m) 13 ft (4m) 10 ft (3m)
Control Specifications:
0~10V Dimming: Connects to YYZ Lighting Dimmer Drive to accept 0~10-V dimming
ELV Dimming: Connects to YYZ Lighting Dimmer Drive compatible with 3rd party
rdprotocol from 3 party controls such as Lutron.
dimmers from Lutron, Leviton, etc...
DMX Dimming: Connects to YYZ Lighting ColorDriveDMX or ColorDrive-Repeater
ColorDrive controls accept DMX data input from 3rd party controls
All Controls: Feature 90 VAC – 260 VAC primary input capability with regulated
24VDC output as required by LFG series fixtures
All fixtures connected to a Dimmer Driver will perform the same
functions. Individual fixture control is not available.
LFG series
Mechanical Specifications:
Length: 12.00” (304.0mm) or custom up to 96" (2,430mm)
Width: 1.75” (44.80mm)
Height: 1.00” (25.4mm) fixture // 45.2mm w Clip/Track // 57.25mm w Bracket
Housing: Anodized aluminum extrusion
Mounting: Mounting screw (though Clips, Track or Bracket) or 2-way tape (Track)
Weight: 0.33 lb (0.15 kg)
RD = Red 625nmAM = Amber 595nm
GR = Green 535nm
BL = Blue 470nm
## = Custom
WT65 = 6500K
WT55 = 5500K
WT41 = 4100KWT35 = 3500K
WT30 = 3000K
WT27 = 2700K
Ordering Information:
Series LED Color Fixture LengthPower Type Mounting Options
LFG-I = IndoorLFG-O = Outdoor
12" = Standard4.8W Swivel Bracket AMP Connectors## = Custom 7.2W Mounting Channel IP Connectors
(6" ~ 96")9.6W12.0W
LFG-I XX XXXX XX XX
304mm( 12.0" )
* OR CUSTOM *
40.0mm( 1.58")
* when swiveled to 90° *
45.0mm( 1.77")
* with clip/channel *
Mounting Clip and Channelmade from same extrusion.
Channel = continuousClip = Cut to 4" size
Mounting Clips Custom Wiring( Contact Rep )
44.80mm( 1.75" )
57.25mm( 2.25" )
45.20mm( 1.80" )
25.40mm( 1.05" )
Mechanical Details:
LFG series