Kumialan koulutus ja tutkimus Euroopassa

Kalle HanhiTTY

Muovi- ja elastomeeritekniikan laboratorio

Kumialan koulutus ja tutkimus Euroopassa

Taustaa

Euroopan kumituotevalmistus > 3.2 Mton/vuosi N. 61 % rengasvalmistusta 250 000 kumialan tyntekij kehittyvt raaka-aineet ja prosessit vaativatmittavia R&D ponnistuksia, pvastuu yrityksill Vaaditaan hyvin koulutettuja insinrej jatutkijoita kehitystoimintaan

European rubber research topics[Jean Leblanc, Pierre & Marie Curie University, Paris,

konferenssissa A Review of European Rubber Researchin Practice, University of Paderborn, Germany]

Properties of raw materials (rubber, fillers, additives,..) 14% Compounding, formulations, new materials 19% Rheological properties (uncured rubber materials) 6% Testing method, analysis 22% Processing - mixing, calendering 7%

- extrusion 2% - moulding, compression or injection 3% Vulcanization, rubber chemicals 7% Ageing, protection, chemical products 2% Usages, parts, applications 18%Kytnnn tuotekehitykseen thtvt tutkimukset yrityksiss?

- raaka-ainevalmistajat kumitehtaat

Leblanc ./..

ADVANCED EDUCATION IN RUBBER SCIENCE COULD BE GIVEN ONLY IF THERE IS UNDERLYING RESEARCH ACTIVITY TO SUPPORT AND FEED IT

No single institute has published papers that demonstrate an expertise in all the aspects of rubber science and technology academic expertise is dispersed throughout Europe

European university education in rubber science is rarely based on local research activity the rubber industry has to complement the knowledge of its newly hired collaborators by in-house training

Kumia tutkivia instituutioitaGB:Queen Mary University London

the largest group working in elastomer materials in the UK

founded in 1965 working in the general areas of failure prediction

resulting from crack growth or aging, predicting the mechanical behaviour of components,

investigating crystallisation phenomenon, insight into a wide range of fundamental elastomer

physics problems rubber research group of 15 workers

Kumia tutkivia instituutioita , GBMERL

MERL offers a comprehensive range of services for rubber and TPEs in engineering, e.g Rubber compound development Prototype component development and manufacture Mechanical and chemical testing of materials and products Engineering design including finite element analysis Ageing assessment and life prediction Analysis of service failures Independent review of manufacturing processes physical testing and production processing Recycling and uses of recycled material Specialist training courses

Kumia tutkivia instituutioita , GBRAPRA TechnologyThe world-class independent polymer research and development centre,

providing plastics and rubber research, technology and information services

Rapra Technology is a wholly owned subsidiaryof The Smithers Group.

RAPRA ./..

Working closely with academia and industry Rapracontinues to expand and grow in all areas of polymer science.

Particular areas of research seeing strong growth include:

Food Contact Nanocomposites Supercritical Fluid Technology Biodegradable Polymers Medical Polymers Polymer Recycling Large Projects

RAPRA koulutus Postgraduate Courses

Short Courses, e.g. Introduction to Rubber Technology Understanding Silicone Rubber Understanding The Principles of Rubber Bonding Understanding Thermoplastic Elastomers (TPE) Understanding Polyurethanes - Their Formulations &

Applications (Seminar) In Company courses

Moving into REACH

On Line courses!

The Tun Abdul Razak Research Centre, TARRC

TARRCs scientific and engineering excellence is focussed towards the advancement of the Malaysian rubber industry through compounding and processing, materials and product development, engineering design, evaluation and testing and production technology

Development of new materials, NRTPV development

Nanocomposite materials

Kumia Ranskan yliopistoissa[Laurent Mathieu, 2004]

French name of the university Interesting fields of study

Universit Claude Bernard Lyon I polymer blend (thermoplastic/elastomers) processingstudy of structure/properties of such blends

Ecole europenne de chimie polymres et matriaux Extruding simulationMorphology of blends in a two roll extruder

National Institute of Applied Science - Lyon Reactive injection and extrusion, processing of blends

Ecole Suprieure de physique chimie industrielle Reinforced elastomers analysisSwelling behaviour of networks

Universite du Mans Compoounding of existing elastomersBehaviour of materials, regarding for instance ageing

Oniversit de Paris 6 Pierre et Marie Curie alloys of filled thermoplastics rheologyUniversit de Saint Etienne chemistry and reactive extrusion

ModelisationRheology of melted polymers

Ecole Nationale Suprieure des Mines de Paris different interesting topics studied by different department-Thermo mechanics and plasticity-visco elastic flows-Polymer physics and Chemistry-Cristallization and structure of polymers-Improving polymer processing simulation

Pierre & Marie Curie UniversityParis

Pierre & Marie Curie University (UPMC) 4000 researchers and teachers/researchers, 180 laboratories 30 000 students including 8000 in postgraduate studies.

UPMC is based in the Latin Quarter in Paris, campus of 50 ha. Polymers in Chemistry & Process Engineering/UPMC

Ifoca L'unique centre de formation spcialis dans le caoutchouc. En

France, l'IFOCA est le seul tablissement d'enseignement spcialisdans la technologie des lastomres. L'ensemble de ses moyens estconsacr former des spcialistes du caoutchouc de tous niveaux, du CAP au diplme d'ingnieur. Il se compose d'un dpartementformation initiale et dun dpartement formation continue. LInstitut bnficie de toutes les comptences humaines et matrielles runies au Centre franais du caoutchouc, vritablecentre de gravit de la Profession.

Deux tablissements: Vitry et Nantes.

The DIK is a non-university affiliated researchinstitution with close ties to industry(A cooperation agreement with the University of Hannover)

The main roles of DIK: research into high-performance elastomers R&T in compounding and processing physical and chemical characterisation of

rubber improvement of service lifetime of rubber

products and composites environmental and trace analysis supportive services to industry

http://www.dikautschuk.de

DIK:Training and Education In cooperation with the University of Hannover, DIK runs a two-semester advance-study program in rubber technology, adapted to the program targetgroup of university graduates with professionalexperience.

The courses are taught by university professors and respected experts in industry.Further education seminars for master tradesmen and technicians as well as engineers and chemists.

The subject areas:- raw materials, fillers, vulcanization, processing, physical and dynamic properties and qualityassurance.

Seminars on different topics

University of Twente, The NetherlandsRUBBER RESEARCH ACTIVITIES (6 persons): Fillers Aging Fibre reinforcement Crosslinking Morphology Recycling

Fraunhofer Gesellschat

http://www.fraunhofer.de/fhg/EN/profile/locationnat/index.jsp

Laroverket.com:

LROVERKETSGUMMITEKNISKA UTBILDNINGAR

Hgre kurs i gummiteknik, TSGF

Utkad kurs i gummi-teknik, UKG

Gummiteknisk kurs, GTK

Provning av gummi, PAG

TSGF international: Advanced Course in Rubber Technology

VERT

Head of Rubber Group: Andreas Limper

Institut fr Kunststofftechnik, Universityof Paderborn

Mini-Derucom (Minimum Default in Rubber Compounding).

PRODESC (ProcessDescription for Silica and Carbon Black Compounds)

A consortium of companies and research institutes started twoproposals to be sent to Brusselsin terms of the BRITE Programmein 1997:

Muita yliopistoja ja instituutioita Technical University of Poznan, Polymer processing/Mechanical Engineering Lab

RRI STOMIL, Poland

Institute of Chemical technology, Prague, Department of Polymers

Technical University of Budapest, Department of Plastics and Rubber Technology

The Faculty of Technology of Tomas Bata University in Zln, Zheck Republic

Scientific Research Institute of Elastomeric Materials and Articles, Moscow, Russia

Tyre Research Institute (NIISP), Moscow, Russia,

NIISK (S.V.Lebedev Synthetic Rubber Research Institute), St.Petersburg, Russia

St Petersburg Technical Institute Syntehetic Rubber and Metallorganic Compounds

Venjn Tiedeakatemian yksikk Pietarissa: Inst. of Macromol.Compounds (IMC RAS),

VERT, Virtual Education for Rubber Technology: www.tut.fi/plastics/vert

Education project Funded by EU Commission, 75 %

Leonardo da Vinci-programme Duration: 3 years, 1.10.2004 30.9.2007 Co-ordinator: Tampere University of

Technology/Plastics and Elastomer Technology Partners (European institutions):

Nokian Tyres Plc, Finland HAN University, The Netherlands University of Twente, The Netherlands Lroverket AB, Sweden Alexander Dubcek University, Slovak Republic Matador a.s, Slovak Republic

Masterdegree45 cr major subject

Proj.work Master thesis 30 cr

ORIENTING and PREPARINGSTUDIES 3 cr

PD Projectwork 10 cr

Rubber coursesCore studies 30 cr

Selectability

Selectale 20 crfrom ETS

Basic studies

Specializing stud.

Tutoring, interaction, advices