Benefits • Easy to use and calibrate • Supports environmental legislation compliance • Market leading reliability • Standardises monitoring routines • Easy transfer of data

Options (available at purchase or later) • Choice of additional gases including H2S to 10,000ppm, and H2 compensated CO • Borehole gas flow (l/h) • GPS / field navigator • Gas Analyser Manager software for data download • ATEX certified anemometer

GA5000Portable gas analyser

Landfill

Applications • Landfill gas monitoring • Waste to energy • Site investigation

Features • Certified: ATEX, IECEx, MCERTS (applied for), CSA and UKAS calibration (ISO17025) • Measures % CH4, CO2, and O2 • Peak and previous readings shown • Simultaneous display of all gases • 3 year warranty • CH4 and CO2 accuracy ± 0.5% after calibration • Modular and upgradeable • Memory:2,000 IDs*, 4,000 readings and 2,000 events* (* with GAM software) • Event log

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page 2 of 3 DS45. Iss.03

Technical specifications

GA5000POWER SUPPLYBattery type Rechargeable nickel metal hydride battery pack (not user replaceable)Battery life Typical use 8 hours from fully chargedBattery charger Separate intelligent battery charger powered from mains supply (100-240V)Charge time Approximately 3 hours from complete discharge

GAS RANGESGases measured CO2 and CH4 By dual wavelength infrared sensor with reference channel

O2 By internal electrochemical sensorCO (hydrogen compensated), H2S, NH3 and H2 (optional)

By internal electrochemical sensor

A full range of internal gas cells can be specified at the time of manufacture.Oxygen cell lifetimeother chemical cell lifetime

Approximately 3 years in airSuitable for sampling applications - not for continuous use

Range CH4CO2O2COH2S

0-100% 0-100% 0-25%0-2,000ppm0-50ppm up to 0-10,000ppm

Typical accuracy after calibration

CH4CO2O2

0-70% 0-60% 0-25%

±0.5% (vol) ±0.5% (vol) ±1.0% (vol)

70-100% 60-100%

±1.5% (vol)±1.5% (vol)

COCO (H2)*

0-500ppm0-2,000ppm

± 2.0% FS± 1.0% FS

H2S 0-50ppm0-200ppm0-500ppm0-1,000ppm0-5,000ppm0-10,000ppm

± 1.5% FS± 2.0% FS± 2.0% FS± 2.0% FS± 2.0% FS± 5.0% FS

Response time, T90 CH4CO2O2COH2S

≤ 10 seconds≤ 10 seconds≤ 20 seconds≤ 30 seconds≤ 30 seconds

*Hydrogen compensated carbon monoxide measurement

Compensated for interference from up to 2,000ppm hydrogen. Hydrogen cross gas effect on CO approximately 1%.

PUMPFlow 550 ml/min typicallyFlow fail point -200 mbar vacuum - user settableMaximum vacuum restart -375 mbar approximately with flow rate of approximately 80ml/ min

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page 3 of 3 DS45. Iss.03

Technical specifications

GA5000 cont’d.FACILITIESTemperature measurement -10°C to +75°C with optional probeTemperature accuracy ±0.5°C with optional probeFlow from borehole 0-20 l/hr internal measurementFlow from borehole accuracy ±0.3 l/hrAlarm User selectable alarm levelsCommunications Via USB lead or wireless Bluetooth *Relative pressure measurement ±500 mbarRelative pressure accuracy ±4 mbar typically (should be zeroed before reading) to ±15 mbar maximumBarometric pressure measurement 500 to 1500 mbar, ±5 mbar accuracyGPS sensor Location and positioningAvailable memory 2,000 IDs*, 4,000 readings, 2,000 events*

ENVIRONMENTAL CONDITIONSOperating temperature range -10°C to +50°CAtmospheric pressure range 700 to 1200 mbarRelative humidity 0-95% non condensingCase seal IP65

PHYSICALWeight 1.6 kilogramsSize L 220mm, W 155mm, D 60mmCase material ABS/ polypropylene with rubber over-mouldingKeys Alpha-numeric keypad with “tactile” membraneDisplay Ultra-clear high resolution 4.3” full colour TFTConnections Colour coded gas inlet, outlet and pressure ports. Waterproof USB port, anemometer and

charger/ temperature probe connections.Gas sample filters External user changeable 2.0µm ptfe water traps.

CERTIFICATION RATINGATEX II 2G Ex ib IIA T1 Gb (Ta = -10°C to +50°C)MCERTS Applied forISO17025 Calibration to UKAS certificate number 4533CSA Ex ib IIA T1 (Ta= -10°C to +50°C) (Canada), AEx ib IIA T1 (Ta= -10°C to +50°C) (USA)* Gas Analyser Manager software requiredImportant Note: The information in this document is correct at the time of generation. We do, however, reserve the right to change the specification without prior notice as a result of continuing development.

Options (available at purchase or later) • H2 compensated CO • Choice of additional gases including H2S to 10,000ppm • GPS / field navigator • Gas Analyser Manager software for data download • External gas flow devices: anemometer (ATEX) / Pitot tubes

GEM5000 Gas extraction monitor

Gas extraction sites

Benefits • Aids balancing of gas field • Real time adjustments can be made • Maximise power output from site • Easy to read • No need for self-certification of anemometer • Maximise revenue from CH4

Features • Certified: ATEX, IECEx, MCERTS (applied for), CSA and UKAS calibration (ISO17025) • Measures % CH4, CO2, O2 • Records static and differential pressure • Calculates gas flow (m3/h) and calorific value (KW or BTU) (external flow device and Gas Analyser Manager software required) • CH4 and CO2 accuracy ±0.5% after calibration • Modular and upgradeable • 3 year warranty • Robust design for market leading reliability • Event log

Applications • Landfill gas field optimisation • Landfill gas energy calculation • Flare / engine output estimation

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page2 of 3 DS44, Iss.03

Technical specifications

GEM5000POWER SUPPLYBattery type Rechargeable nickel metal hydride battery pack (not user replaceable)

Battery life Typical use 8 hours from fully charged

Battery charger Separate intelligent 3A battery charger powered from mains supply (100-240V)

Charge time Approximately 3 hours from complete discharge

GAS RANGESGases measured CO2 and CH4 By dual wavelength infrared sensor with reference

channelO2 By internal electrochemical sensor

CO (hydrogen compensated), H2S, NH3 and H2 (optional)

By internal electrochemical sensor

A full range of internal gas cells can be specified at the time of manufacture.

Oxygen cell lifetimeOther chemical cell lifetime

Approximately 3 years in airSuitable for sampling applications - not for continuous use

Range CH4CO2O2COH2S

0-100% 0-100% 0-25%0-2,000ppm0-50ppm up to 0-10,000ppm

Typical accuracy after calibration CH4CO2O2

0-70% 0-60% 0-25%

±0.5% (vol) ±0.5% (vol) ±1.0% (vol)

70-100% 60-100%

±1.5% (vol)±1.5% (vol)

COCO(H2)*

0-500ppm0-2,000ppm

± 2.0% FS± 1.0% FS

H2S 0-50ppm0-200ppm0-500ppm0-1,000ppm0-5,000ppm0-10,000ppm

± 1.5% FS± 2.0% FS± 2.0% FS± 2.0% FS± 2.0% FS± 5.0% FS

Response time, T90 CH4CO2O2COH2S

≤10 seconds≤10 seconds≤20 seconds≤30 seconds≤30 seconds

*Hydrogen compensated carbon monoxide measurement

Compensated for interference from up to 2,000ppm hydrogen. Hydrogen cross gas effect on CO approximately 1%

PUMPFlow 550 ml/min typically

Flow fail point -200 mbar vacuum - user settable

Maximum vacuum restart -375 mbar approximately with flow rate of approximately 80ml/ min

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page 3 of 3 DS44, Iss.03

GEM5000 cont’d.FACILITIESTemperature measurement -10°C to +75°C with optional probe

Temperature accuracy ±0.5°C with optional probeFlow measurement Via Pitot tube, orifice plate or anemometerEnergy measurement Calculated using gas concentrations, flow, and temperature readingsAlarm User selectable alarmsCommunications Via USB lead or wireless Bluetooth *Relative pressure measurement ±500 mbar

Relative pressure accuracy ±4 mbar typically (should be zeroed before reading) to ±15 mbar maxBarometric pressure measurement 500 to 1500 mbar, ±5 mbar accuracyGPS sensor Location and positioningAvailable Memory 2,000 IDs*, 4000 readings, 2,000 events*

ENVIRONMENT CONDITIONSOperating temperature range -10°C to +50°CAtmospheric pressure range 700 to 1200 mbarRelative humidity 0-95% non condensingCase seal IP65

PHYSICALWeight 1.6 kilogramsSize L 220mm, W 155mm, D 60mmCase material ABS/ polypropylene with rubber over-mouldingKeys Alpha-numeric keypad wth “tactile” membraneDisplay Ultra-clear high resolution 4.3” full colour TFTConnections Colour coded gas inlet, outlet and pressure ports. Waterproof USB port, anemometer and

charger/ temperature probe connectionsGas sample filters External user changeable 2.0µm ptfe water traps

CERTIFICATION RATINGATEX II 2G Ex ib IIA T1 Gb (Ta = -10°C to +50°C)MCERTS Applied forISO17025 Optional calibration to UKAS certificate number 4533CSA Ex ib IIA T1 (Ta= -10°C to +50°C) (Canada), AEx ib IIA T1 (Ta= -10°C to +50°C) (USA)* Gas Analyser Manager software requiredImportant Note: The information in this document is correct at the time of generation. We do, however, reserve the right to change the specification without prior notice as a result of continuing development.

Technical specifications

Options (available at purchase or later) • H2S to 0-5,000ppm or 0-10,000ppm • Gas Analyser Manager software for data download • External flow devices:anemometer (ATEX) / Pitot tubes • ATEX certified temperature probe

Benefits • Enables consistent collection of data for improved analysis and accurate reporting • No need for self-certification of anemometer • Easy to use and calibrate • User configurable operation • Helps check digester process is running efficiently

Features • Certified: ATEX, IECEx, MCERTS (applied for), CSA and UKAS calibration (ISO17025) • Robust design for market leading reliability • CH4 and CO2 accuracy ± 0.5% after calibration • Measures % CH4, CO2 and O2 • Modular and upgradeable • 3 year warranty • Stores and downloads readings • User selected languages • Event log

BIOGAS 5000 Portable gas analyser

Anaerobic digestion

Applications • Farm digester gas monitoring • Food processing biogas monitoring • Waste water biogas monitoring • Methane recovery

Tel: +44 (0)1926 338111Fax: +44 (0)1926 338110Email: sales@geotech.co.uk

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page 2 of 3 DS43, Iss.04

Technical specifications

BIOGAS 5000POWER SUPPLYBattery type Rechargeable nickel metal hydride battery pack (not user replaceable)Battery life Typical use 8 hours from fully chargedBattery Charger Separate intelligent battery charger powered from mains supply (100 - 240V)Charge time Approximately 3 hours from complete discharge

GAS RANGESGases measured CO2 and CH4 By dual wavelength infrared sensor with reference channel

O2 By internal electrochemical sensorH2S (optional) By internal electrochemical sensor

Oxygen cell lifetimeH2S cell lifetime

Approximately 3 years in airSuitable for sampling applications - not for continuous use

Range CH4CO2O2H2S

0 - 100% 0 - 100% 0-25%0-5,000ppm or 0-10,000ppm

Typical accuracy - after calibration CH4CO2O2

0-70% 0-60% 0-25%

±0.5% (vol) ±0.5% (vol) ±1.0% (vol)

70-100% 60-100%

±1.5% (vol)±1.5% (vol)

H2S 0-50ppm0-200ppm0-500ppm0-1,000ppm0-5,000ppm0-10,000ppm

± 1.5% FS± 2.0% FS± 2.0% FS± 2.0% FS± 2.0% FS± 5.0% FS

Response time, T90 CH4CO2O2H2S

≤ 10 seconds≤ 10 seconds≤ 20 seconds≤ 30 seconds

PUMPFlow 550 ml/min typicallyFlow fail point -200 mbar vacuum - user settableMaximum vacuum restart -375 mbar approximately with flow rate of approx 80ml/min

Tel: +44 (0)1926 338111Fax: +44 (0)1926 338110Email: sales@geotech.co.uk

Product designs and specifications are subject to change without notice. User is responsible for determining suitability of product.Page 3 of 3 DS43, Iss.04

Technical specifications

BIOGAS 5000, cont’d.FACILITIESTemperature measurement -10°C to +75°C with optional probeTemperature accuracy ±0.5°C with optional probeFlow measurement Via Pitot tube, orifice plate, or anemometerAlarm User selectable alarmsCommunications Via USB lead or wireless Bluetooth *Relative pressure measurement ±500 mbarRelative pressure accuracy ±4 mbar typically (should be zeroed before reading) to ±15 mbar maxBarometric pressure measurement 500 to 1500 mbar, ±5 mbar accuracyAvailable memory 10 IDs*, 500 readings

ENVIRONMENTAL CONDITIONSOperating temperature range -10°C to +50°CAtmospheric pressure range 700 to 1200 mbar

Relative humidity 0-95% non condensingCase seal IP65

PHYSICALWeight 1.6 kilogramsSize L 220mm, W 155mm, D 60mmCase material ABS / polypropylene with rubber over-mouldingKeys Alpha-numeric keypad with “tactile” membraneDisplay Ultra-clear high resolution 4.3” full colour TFTConnections Colour coded gas inlet, outlet and pressure ports. Waterproof USB port, anemometer and

charger / temperature probe connections.Gas sample filters External user changeable 2.0µm ptfe water traps.

CERTIFICATION RATINGATEX II 2G Ex ib IIA T1 Gb (Ta = -10°C to +50°C)MCERTS Applied forISO17025 Calibration to UKAS certificate number 4533CSA Ex ib IIA T1 (Ta= -10°C to +50°C) (Canada), AEx ib IIA T1 (Ta= -10°C to +50°C) (USA)* Gas Analyser Manager software required.Important note: The information in this document is correct at the time of generation. We do however, reserve the right to change the specification without prior notice as a result of continuing development.

GA3000Online GAs AnAlysis

Biogas/ AD CDM LandfillGas

GA3000

Keunggulan Produk : • Tidak membutuhkan pelatihan • Biaya perawatan yang ringan • Kalibrasi terakreditasi ISO 17025 • Pemasangan yang mudah dan cepat • Sistem terkemas kompak • Pendingin gas disertakan sebagai standar • tidak membutuhkan downtime - “Hot Swap” • Bebas jadwal perawatan • Terbukti dilapangan,peralatan standar industri • Konfigurasi awal yang mudah • Kalibrasi user secara simpel

Fitur • Mengukur kadar CH4, CO2, O2 • Mengukur H2S 0 - 5000ppm (optional) • Pembersihan udara H2S • Layar tampilan besar dan jelas • Output 4-20mA untuk setiap gas • Alarm relays (konfigurasi pengguna) • Pilihan Gas return-to-process • Sensor H2S dapat diganti oleh user • IP54 anti air • Sertifikasi ATEX untuk Zona 2 • Komunikasi Modbus

GA3000 yang bersertifikasi ATEX dibuat tangguh dilapangan, teknologi gas analisis yang kuat untuk menghasilkan biaya monitoring yang efektif dengan output data lokal.

GA3000

O2H2S

By dual wavelength infrared cell with reference channelBy internal electrochemical cellBy external module (electrochemical cell)

CO2O2H2S

0 - 100% 0 - 100% 0 - 25% 0 - 5000ppm

GasCH4CO2O2

0-5% vol±0.5% (vol)±0.5% (vol)±1.0% (vol)

5-15% vol±1.0% (vol)±1.0% (vol)±1.0% (vol)

15% - FS±2.0% (vol)±2.0% (vol)±1.0% (vol)

H2S 0-5000PPM ±100ppm or ±5% of reading (if greater)

CO2O2H2S

Output Channels Up to Four 4-20mA Output Channels (outputs are current sink)Alarm Notifications 2 user definable alarms which can be triggered when above or below a set value. Alarms can be

latched to advise user if an alarm has occurred. Recovery values can also be defined.Relay Outputs 3 single pole changeover 6A 250V relays volt free.

Two relays for alarms and one for fault condition

Spesifikasi Teknis

Spesifikasi UmumJumlah sampling point 1Gas yang diukur CH4, CO2, O2, H2S (optional)Interval Pembacaan kontinu CH4, CO2, & O2

konfigurasi untuk H2S Suhu Pemakaian antara -5°C s/d +40°C

POWERMains Options 110 - 230 VAC 50/60 HzKonsumsi 0.1A ± 5%Instrument Backup Memory Lithium Manganese Backup Battery For Memory Retention

Cakupan GasGas yang diukur CH4 & CO2

Cakupan CH4

Tipe keakuratan - setelah kalibrasi

*ditambah akurasi dari kalibrasi gas yang digunakanWaktu Respon, T90 CH4 ≤20 detik

≤20 detik≤20 detik≤60 detik

Usia Oxygen Cell Sekitar 3 tahun dalam udaraUsia H2S Cell Sekitar 2 tahun dalam udara

PompaFlow 350 ml/min typicallyFlow-Fail Point -375 mbar VacuumMaximum Vacuum Restart -375 mbarKOMUNIKASI

Sales Office: Tel: 021 5467618Fax: 021 5467617www.tridinamika.com

ISO17025 Calibrated Under UKAS Accreditation (Certificate Number 4533)ATEX

II 3 G Ex nA nL nC d IIA T1 Gc (-5<= Ta <=40)BS EN 61010 Safety Requirements for electrical equipment for measurement, control, and

laboratory use.BS EN 50270: 2006 Electromagnetic compatability - Electrical Apparatus for the detection and

measurement of combustible gases, toxic gases or oxygen.

Sales Office: Tel: 021 5467618 Fax: 021 5467617 www.tridinamika.com

Spesifikasi Teknis

GA3000 lanjutanFisikBerat 29 KilogramsUkuran 650 x 600 x 210mmKetahanan Painted Steel 600 x 600 x 210mm IP54Tombol operasional Membrane Panel KeypadLayar Liquid crystal display, 40 x 16 characters

Fibre optic woven back-light for low light conditions

Filter Gas Conditioning User replaceable microfibre filter

Tingkat Sertifikasi