save energyand live

comfortably

the system'smultiple

advantages

ENJOY YOUR LIVING SPACE WHILEYOU SAVE ENERGY

isomateu

www

THE APPLICATION PROCESS

1 3

5 6

The aluminium holding rail is placed around the building and parallel to the ground by fastening it on the substrate with special anchors (2 pieces/meter).

Next the adhesive (ISOMAT AK-T35/T55/T65) is applied on the thermal insulation boards (EPS, XPS, MINERAL WOOL) in 2 different ways:a) Uniformly, on the whole surface of the

board, using a notched trowel, if the substrate is smooth.

b) Along the perimeter of the board and in 2 or more spots in its center, using a trowel, if the substrate is uneven.

The thermal insulation boards (EPS, XPS, MINERAL WOOL) are then fixed by placing them from bottom up, in horizontal consecutive layers overlapping each other so as to form a layout of crossed joints that will prevent cracking of the overlaid plaster.

The following day the thermal insulation boards (EPS, XPS, MINERAL WOOL) are fixed mechanically with collar head anchors, which should have a length according to the thickness of the board and the type of the substrate. Next the base coat (ISOMAT AK-T35/T55/T65) is applied universally on the boards.

The base coat is applied with a notched trowel in parts of width > 1m. Afterwards, the fiberglass mesh is placed and pressed on the still fresh layer of the base coat with a smooth trowel.

After the base coat has fully dried, the surface is primed with the primer of the respective plaster that will be used. After the primer has dried, the surface is then coated with the pasty acrylic or silicone plasters MARMOCRYL of ISOMAT.

2

A

B

4

THESSALONIKI, GREECE17th km Thessaloniki - Ag. Athanasios RoadP.O. BOX 1043, 570 03 AG. ATHANASIOS, GREECEΤ +30 2310 576 000, F +30 2310 722 475

ISOMAT S.A.ΒUILDING CHEMICALS & MORTARSwww.isomat.euinfo@isomat.eu

The energy saving in buildings is an evergreen topic, as it leads to the reduction of energy consumption for heating and cooling, which reduces radically both the households' expenses and the air pollution.

For this reason, ISOMAT has developed the external thermal insulation system ISOMAT THERMOSYSTEM, which contributes to great energy saving by consuming less fuel for heating during the winter and less electrical power for air-conditioning during summer due to the excellent thermo-insulation of the building. In this way you save money and contribute to the environmental protection, while you enjoy thermal comfort in your living space during the whole year.

EXTERNAL THERMAL INSULATION SYSTEMS

CERTIFIED SYSTEMISOMAT THERMOSYSTEM has been certified according to the requirements of the European Standard EN 13499: external thermal insulation composite systems (ETICS) based on expanded polystyrene.

This certification guarantees that the system maintains a stable, long-term performance.

“I save energy & reduce my operating expences”With the external thermal insulation system ISOMAT THERMOSYSTEM you save energy by consuming less fuel for heating during winter and less electrical power for air-conditioning during summer. Thus, since the energy cost is significantly reduced, the money invested in the installation of ISOMAT THERMOSYSTEM is paid off at a great extent already from the first years of the system's operation.

“I contribute to the environmental protection” ISOMAT THERMOSYSTEM contributes to the protection of the environment, as it reduces drastically the air pollution, which is caused by the use of fuel for a building's heating or cooling. Particularly, ISOMAT THERMOSYSTEM contributes to the reduction of emission of carbon dioxide and other pollutants, such as nitrogen and sulphur oxides, that are responsible for the creation of the Greenhouse Effect.

“I enjoy my living space”ISOMAT THERMOSYSTEM eliminates the thermal bridges. In this way the building remains thermal protected all-around and ensures a stable as possible room temperature throughout the year. Thus, you enjoy thermal comfort in your living space during all seasons.

“I renovate and protect my building”ISOMAT THERMOSYSTEM constitutes a great solution for the renovation of old constructions. The buildings acquire a new, beautiful decorated façade thanks to the colored, high quality, pasty plasters MARMOCRYL of ISOMAT, which are available in 305 unique colors. At the same time, the façade becomes absolute weather resistant and waterproof, without losing its vapor permeability.

“I finish work fast & easy”ISOMAT THERMOSYSTEM is applied fast and easy. Its fast and most cost-effective installation is assured only if it is done by a trained installation crew. During the application of ISOMAT THERMOSYSTEM, the tenants do not need to move out from the house, while there is only a minimum disturbance for the neighbours.

WARRANTY

SYSTEMS

easyapplication

in 6 steps

0712

ISOMAT THERMOSYSTEM CLASSIC

RECOMMENDED PRODUCTS

BOARDS OF EXPANDEDPOLYSTYRENE

THERMOSYSTEM FIBERGLASS MESH 145 g/m²

MARMOCRYL Fine

Consumption:approx. m²/mm 1,8 kg/

Acrylic, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with smooth finish.

MARMOCRYL Decor

Consumption:approx. 6 m²/mm 1, kg/

Acrylic, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with coarse-textured finish.

MARMOCRYL GRANIT

Consumption:approx. m²/1,8 kg/ mm

Acrylic, pasty coating with colored fillers. It is used for the creation of decorative, water-repellent surfaces with granite-like finish.

Polyester cloth of 145 g/m², used for reinforcing the base coat on the thermal insulation boards.

Thermal insulation boards of expanded polystyrene. Available in several thicknesses.

ISOMAT THERMOSYSTEM CLASSIC is an affixed system of multiple layers, which consists of:

• Thermal insulation boards of expanded polystyrene (EPS).• Supplementary parts (aluminium holding rail with embedded water drip, fiberglass mesh, corner profile with

mesh etc.)• Special fiber-reinforced mortar used both as an adhesive for fixing the thermal insulation boards and for

creating the base coat before plastering. • Acrylic, water-repellent, pasty plasters.

ISOMAT THERMOSYSTEM CLASSIC is the most cost-effective thermal-insulation solution proposed by ISOMAT. It is vapor-permeable, allowing the construction to breathe. It also constitutes an excellent solution for the renovation of old constructions thanks to the colored, high quality, pasty plasters MARMOCRYL of ISOMAT, which are available in 305 unique colors.

ISOMAT AK-T35

Consumption:

Fiber-reinforced, cement-based adhesive and base coat for thermal insulation boards.

as adhesive: approx. 3,0-4,0 kg/m²as base coat: approx. 1,5 ²kg/m /mm

ML-PRIMER

Consumption:approx. ² 150-300 g/m

High quality, colored, filled primer for the adhesion of acrylic plasters.

1

2

3

4

1

2

3

4

Thermal insulation boards of expanded polystyrene (EPS)

Reinforced layer (base coat) of ISOMAT AK-T35 with THERMOSYSTEM fiberglass mesh (145 g/m²)

Plastering with MARMOCRYL

Fixing of thermal insulation boards with ISOMAT AK-T35

RECOMMENDED PRODUCTS

ISOMAT AK-T55

Consumption:

High quality, fiber-reinforced, cement-based adhesive and base coat for thermal insulation boards.

as adhesive: approx. 3,0-4,0 kg/m²as base coat:approx. 1,5 ²kg/m /mm

MARMOCRYL GRANIT

Consumption:approx. m²/1,8 kg/ mm

Acrylic, pasty coating with colored fillers. It is used for the creation of decorative, water-repellent surfaces with granite-like finish.

THERMOSYSTEMFIBERGLASS MESH 160 g /m² Polyester cloth of 160 g/m², used for reinforcing the base coat on the thermal insulation boards.

BOARDS OF EXPANDEDPOLYSTERENEThermal insulation boards of expanded polystyrene. Available in several thicknesses.

ISOMAT THERMOSYSTEM PREMIUMISOMAT THERMOSYSTEM PREMIUM is an affixed system of multiple layers, which consists of:

• Thermal insulation boards of expanded polystyrene (EPS).• Supplementary parts (aluminium holding rail with embedded water drip, fiberglass mesh, corner profile with

mesh etc.)• Special, high quality, fiber-reinforced mortar used both as an adhesive for fixing the thermal insulation boards

and for creating the base coat before plastering.• Acrylic or silicone, water-repellent, vapor permeable, pasty plasters.

ISOMAT THERMOSYSTEM PREMIUM is the ideal solution for constructions with high requirements in ageing resistance and durability. It is vapor permeable, allowing the constructions to breathe. It constitutes an excellent solution for the renovation of old constructions thanks to the colored, high quality, pasty plasters MARMOCRYL or MARMOCRYL SILICONE of ISOMAT, which are available in 305 unique colors.

SILICONE PRIMER

Consumption:approx. ² 100-200 g/m

High quality primer for the adhesion of silicone plasters.

1

2

3

4

Thermal insulation boards of expanded polystyrene (EPS)

Reinforced layer (basecoat) of ISOMAT AK-T55 with THERMOSYSTEM fiberglass mesh (160 g/m²)

Plastering with MARMOCRYL or MARMOCRYL SILICONE

Fixing of thermal insulation boards with ISOMAT AK-T55

1

2

3

4

MARMOCRYL Fine & Decor

Consumption:Fine: approx. m²/mmDecor: approx. 6 m²/mm

1,8 kg/ 1, kg/

Acrylic, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with smooth or coarse-textured finish.

Fine & DecorMARMOCRYL SILICONE

Consumption:Fine: approx. m²/mmDecor: approx. 6 m²/mm

1,8 kg/ 1, kg/

Silicone, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with smooth or coarse-textured finish.

ML-PRIMER

Consumption:approx. ² 150-300 g/m

High quality, colored, filled primer for the adhesion of acrylic plasters.

THERMOSYSTEMFIBERGLASS MESH 160 g/m²

ISOMAT THERMOSYSTEM XPS

RECOMMENDED PRODUCTS

ISOMAT AK-T55

BOARDS OF EXTRUDEDPOLYSTERENE

High quality, fiber-reinforced, cement-based adhesive and base coat for thermal insulation boards.Consumption:as adhesive: approx. 3,0-4,0 kg/m²as base coat:approx. 1,5 ²kg/m /mm

Thermal insulation boards of extruded polystyrene. Available in several thicknesses.

ISOMAT THERMOSYSTEM XPS is an affixed system of multiple layers, which consists of:

• Thermal insulation boards of extruded polystyrene (XPS).• Supplementary parts (aluminium holding rail with embedded water drip, fiberglass mesh, corner profile with

mesh etc.)• Special, high quality, fiber-reinforced mortar used both as an adhesive for fixing the thermal insulation boards

and for creating the base coat before plastering.• Acrylic or silicone, water-repellent, pasty plasters.

ISOMAT THERMOSYSTEM XPS is the ideal solution for constructions with very high requirements in durability, resistance to ageing and impact-resistant facades. It allows the building to breath. It constitutes an excellent solution for the renovation of old constructions thanks to the colored, high quality, pasty plasters MARMOCRYL or MARMOCRYL SILICONE of ISOMAT, which are available in 305 unique colors.

1

2

3

4

Thermal insulation boards of extruded polystyrene (XPS)

Reinforced layer (base coat) of ISOMAT AK-T55 with THERMOSYSTEM fiberglass mesh (160 g/m²)

Plastering with MARMOCRYL or MARMOCRYL SILICONE

Fixing of thermal insulation boards with ISOMAT AK-T55

1

2

3

4

Polyester cloth of 160 g/m², used for reinforcing the base coat on the thermal insulation boards.

MARMOCRYL Fine & Decor

Consumption:Fine: approx. m²/mmDecor: approx. 6 m²/mm

1,8 kg/ 1, kg/

Acrylic, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with smooth or coarse-textured finish.

Fine & DecorMARMOCRYL SILICONE

Consumption:Fine: approx. m²/mmDecor: approx. 6 m²/mm

1,8 kg/ 1, kg/

Silicone, white or colored, pasty plaster. It is used for the creation of colored, water-repellent surfaces with smooth or coarse-textured finish.

ML-PRIMER

Consumption:approx. ² 150-300 g/m

High quality, colored, filled primer for the adhesion of acrylic plasters.

SILICONE PRIMER

Consumption:approx. ² 100-200 g/m

High quality primer for the adhesion of silicone plasters.

MARMOCRYL GRANIT

Consumption:approx. m²/1,8 kg/ mm

Acrylic, pasty coating with colored fillers. It is used for the creation of decorative, water-repellent surfaces with granite-like finish.

ISOMAT THERMOSYSTEM WOOL

RECOMMENDED PRODUCTS

ISOMAT AK-T65

Consumption:

High quality, cement-based adhesive and base coat for thermal insulation boards.

as adhesive: approx. 3,0-4,0 kg/m²as base coat:approx. 1,5 ²kg/m /mm

ISOMAT THERMOSYSTEM WOOL is an affixed system of multiple layers, which consists of:

• Thermal insulation boards of mineral wool.• Supplementary parts (aluminium holding rail with embedded water drip, fiberglass mesh, corner profile with

mesh etc.)• Special, high quality mortar used both as an adhesive for fixing the thermal insulation boards and for creating

the base coat before plastering. • Silicone, water-repellent, pasty plasters.

ISOMAT THERMOSYSTEM WOOL is the ideal solution for constructions with high requirements in fire protection, as mineral wool is highly fire-resistant. It is also very vapor-permeable, allowing the building to breathe, as well as sound insulating. It constitutes an excellent solution for the renovation of old constructions thanks to the colored, high quality plasters MARMOCRYL SILICONE of ISOMAT, which are available in 305 unique colors.

THERMOSYSTEMFIBERGLASS MESH 160 g/m²Polyester cloth of 160 g/m², used for reinforcing the base coat on the thermal insulation boards.

SILICONE PRIMER

Consumption:approx. ² 100-200 g/m

High quality primer for the adhesion of silicone plasters.

MARMOCRYL SILICONE Fine

Consumption:approx. m²/mm 1,8 kg/

Silicone, white or colored, pasty plaster. It is used for the creation of colored, vapor permeable, water-repellent surfaces with smooth finish.

MARMOCRYL SILICONE Decor

Consumption:approx. 6 m²/mm 1, kg/

Silicone, white or colored, pasty plaster. It is used for the creation of colored, vapor breathable, water-repellent surfaces with coarse-textured finish.

1

2

3

Thermal insulation boards of mineral wool

Reinforced layer (base coat) of ISOMAT AK-T65 with THERMOSYSTEM fiberglass mesh (160 g/m²)

4 Plastering with MARMOCRYL SILICONE

Fixing of thermal insulation boards with ISOMAT AK-T65

1

2

3

4

MINERAL WOOLThermal insulation boards of mineral wool. Available in several thicknesses.

MARMOCRYL GRANIT

Consumption:approx. m²/1,8 kg/ mm

Acrylic, pasty coating with colored fillers. It is used for the creation of decorative, water-repellent surfaces with granite-like finish.