insert with autofire - the original radiant gas fireplace hammered vintage iron hammered copper...

Download Insert with AutoFire - The Original Radiant Gas Fireplace HAMMERED VINTAGE IRON HAMMERED COPPER HAMMERED

Post on 05-Sep-2019

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Insert with AutoFire™

    TWO DECADES OF HEAT INNOVATION.

    G3.5

  • THE SCIENCE OF WARMTHTM

    Since 1890, we’ve pioneered and perfected radiant heat technology that generates constant, comfortable warmth within your home.

    DRIFTWOOD

    RADIANT HEAT We put radiant warmth into every fire, based on four generations of Legend gas insert DNA. You can feel it.

  • CONVECTIVE HEAT Secondary Heat Exchanger naturally improves convective heat—without a fan. Heats up fast.

    AUTOFIRETM Improves startup, fine tuning your fireplaces for peak performance — saving energy and money.

    EFFICIENCY Radiant heat and zone heating technology are up to 30% more efficient than central forced air systems.

    SAFETY Our fires are put through rigorous safety testing in our in-house CSA approved lab.

    CERAMIC GLASS Durable and robust ceramic glass improves radiant performance.

    ALUMINIZED STEEL Aerodynamic aluminized steel firebox handles high temperatures and delivers efficient radiant warmth.

    ADJUSTABLE HEAT Adjustable flame for constant, even warmth without having to cycle the fire on and off.

    REALISTIC LOGS High definition, low mass fiber ceramic logs heat up and glow quickly, radiating warmth.

    ENHANCED FLAME Our fires create realistic, soothing flames and ambient glowing embers that radiate heat.

    Please Note: Printed images may vary from actual product. All product information is accurate at time of printing and is subject to change. For more information, visit valorfireplaces.com

  • LOGS

    DRIFTWOOD TRADITIONAL LOGS

    INSERT GAS FIREPLACES Old wood fireplaces are highly inefficient heaters. Replace yours with a gas insert for an air-sealed, energy efficient and easy-to-use source of home comfort.

    We designed these expertly crafted logs as realistic-looking as possible, and engineered them to harness radiant heat from the flames and glowing embers.

    TRADITIONAL LOGS 702LSK RED BRICK LINER 708VRL VINTAGE IRON FLOATING FRONT 709FTV BLACK BACKING PLATE 710BPB

  • ROCKS MURANO GLASS DECORATIVE GLASS

    TRADITIONAL LOGS 702LSK RED BRICK LINER 708VRL VINTAGE IRON FLOATING FRONT 709FTV BLACK BACKING PLATE 710BPB

  • LINERS Choose a firebox liner to complement your trim as well as your logs.

    The G3.5 has four unique designs.

    LEDGESTONEBLACK FLUTED REFLECTIVE GLASS

    TIP Liners can appear quite different with the fire on compared to a natural light setting.

  • TRADITIONAL LOGS 702LSK LEDGESTONE 705LSL  EDGEMONT VINTAGE IRON FRONT 721EDV BACKING PLATE 717BPB RISER 725RTB

    RED BRICK

  • 3-SIDED VINTAGE IRON BACKING PLATE 710BPB

    3-SIDED BRUSHED NICKEL BACKING PLATE 714BPB

    3-SIDED BRONZE3-SIDED BLACK

    4-SIDED VINTAGE IRON 4-SIDED BLACK

    FLOATING

    FRONTS

    The 4” wide floating fronts sit proud of either the wall or the two optional backing plates by 1.5”.

    Select a front that suits your home and style. Your dealer can help you choose, if necessary, an appropriate backing plate to complement your front and suit your installation.

    FRONTS

  • HAMMERED VINTAGE IRON HAMMERED COPPER HAMMERED OILED BRONZE

    VINTAGE IRON BRUSHED NICKEL BRONZE

    EDGEMONT

    FRONTS Edgemont fronts are about 2” wide, and slightly offset from the backing plates that sit flush against the wall. These fronts require a three or four-sided backing plate.

    DRIFTWOOD 700XDWK FLUTED LINER 707FBL EDGEMONT NICKEL FRONT 721EDN BACKING PLATE 717BPB

  • FINISHES The G3.5 offers seven finishes. If available, ask your dealer to see an example in person.

    TRADITIONAL LOGS 702LSK RED BRICK 708VRL  EDGEMONT BRUSHED NICKEL FRONT 721EDN BACKING PLATE 717BPB

    BLACK VINTAGE IRON BRUSHED NICKEL

  • CRAFTSMANSHIP Our fronts are made of steel and then powder-coated, or plated with an artisan touch—both durable, longlasting finishes.

    BRONZE HAMMERED VINTAGE IRON HAMMERED COPPER HAMMERED OILED BRONZE

  • XY

    Min. depth (X) = 13½” Min. depth (X) with fan = 16½” Min. height (Y) = 20½” Min. width of fireplace opening at front = 28⅞”

    MINIMUM CAVITY DIMENSIONS

    DIMENSIONS

    700X

    28⅝” 21¼”

    13” 9”

    13”

    4”

    3”

    9½”

    20 ”

    to to

    p of

    fi re

    bo x

    AutoFire

    WINDOW SIZE 25⅝” w x 15” h

    Designed and manufactured by Miles Industries Ltd. Copyright Miles Industries Ltd. 2019

  • MANTEL CLEARANCES

    Mantel Projection A 0 – 6” 8” 10” 12” Mantel Height B* 33” 35” 37” 39” *Measured from underside of mantel to finished hearth or surface that unit sits on.

    Existing Solid fuel fireplace and chimney

    Terminal Cap

    Flashing

    2 x 3” flex liners

    A

    B

    Non-combustible hearth

    With optional Fan: depth +3” (76 mm) Do not put

    furniture or objects within 36” (914 mm) of the front of appliance

    VENTING

    Vertical vent run: Max. 40 feet Min. 10 feet

     WARNING This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

    For more information go to www.P65Warnings.ca.gov.

    Note: Natural gas, in its original state, contains Benzene.

    ALWAYS REFER TO THE MANUAL FOR COMPLETE INSTALLATION INSTRUCTIONS.

  • TRADITIONAL LOGS 702LSK FLUTED LINER 707FBL  FLOATING BLACK 4-SIDED FRONT 713FFB

  • FUEL BED DIRECT VENT BURNER

    Rocks 701RSK Stainless Burner: Natural Gas or Propane

    700JN  700JPTraditional Logs 702LSK

    Pebble Beach Driftwood 700XDWK Ceramic Burner: Natural Gas or Propane

    700XN 700XPMurano Glass 700XDGM

    Decorative Glass 700XDGS

    LINER

    Fluted Black 707FBL

    Reflective Glass 706RGL

    Valor Red Brick 708VRL

    Ledgestone 705LSL

    CHOOSE A FRONT: CHOOSE A BACKING PLATE:

    EDGEMONT REQUIRED

    Hammered Copper 716EHC

    + 3-SIDED 36¼”W x 26⅝”H 717BPB

    or 4-SIDED 36⅜”W x 29¼”H 719BPB

    Hammered  Vintage Iron 716EHV

    Hammered Oiled Bronze 716EHOZ

    Brushed Nickel 721EDN

    Vintage Iron 721EDV

    Bronze 721EDZ

    FLOATING OPTIONAL

    Black

    3-SIDED 33¾” w x 23⅝” h*

    709FTB

    + 3-SIDED, SMALL 33¾” w x 26⅞” x ⁹⁄¹⁶” d 710BPB

    or 3-SIDED, LARGE 42” w x 29” h x ⁹⁄¹⁶” d 714BPB

    You can also use these backing plates with backing plate 717BPB to cover larger fireplace openings.

    Brushed Nickel 709FTP

    Vintage Iron 709FTV Bronze 709FTZ Black 4-SIDED

    33¾” w x 27⅝ h* 713FFB

    Vintage Iron 713FFV

    * Coverage dimensions. Overall front dimensions are slightly large than coverage area, due to a return. Use coverage dimensions when installing.

    OPTIONAL RISER

    Black, small 40”w x 2½”h 725RTB

    Black, large 46¼”w x 2½”h 793RTB

    Vintage Iron, large 46¼”w x 2½”h 793RTV

    OPTIONS

    * EnerGuide Ratings and Outputs have been determined without a fan/blower, using the CSA P4.1-15 test method. Certified to ANSI Z21.88-2014/ CSA 2.33-2014 Vented Gas Fireplace Heater American National Standard. CGA — 2.17-91 Gas Fired Appliances for use at High Altitudes.

    ABOUT OUR EFFICIENCY RATINGS

    While the North American fireplace industry is largely self-regulated, at Valor we use recognized Canadian and US government testing methods to determine our energy efficiencies, and ensure our products perform in your home as rated. To find out more, visit valorfireplaces.com/efficiency

    FUEL BTU/HR

    FUEL MAX.

    INPUT MIN.

    INPUT MAX. OUT W/O FAN* ENERGUIDE*

    700J 26,000 10,000 18,642 70.03%

    700X 24,000 13,000 17,825 70.40%

  • BRG3519E JULY

    ROCKS 701RSK REFLECTIVE LINER 706RGL  VINTAGE IRON 3-SIDED FLOATING FRONT 709FTV BACKING PLATE 710BPB

Recommended

View more >