inl b013 - inlucem.co.nz€¦ · project: quail ridge's showhouse ii 82 rainbow falls road,...

inl_B013

2015/06/21GRAPHIC INFORMATION. LIGHTING PLAN.

40 High street Island Bay. Wellington 6023 NZ0220 156 096 [email protected]

01/08

Stefano la Cava (Lighting Solutions)

PROJECT: Quail Ridge's Showhouse II82 Rainbow Falls Road, Kerikeri. Northland

CLIENT/CONTACT:

Mb: 021 773 221; PH: (09) 551 7418email: [email protected]

MOD.: 2015/06/21

NON DIMABLE LIGHTING CIRCUIT

DIMABLE LIGHTING CIRCUIT

POWER SUPPLY ON WALL

POWER SUPPLY ON CEILING

POWER SUPPLY FOR LED STRIP

F

POINT OF LIGHT CONTROL

POWER SUPPLY INGROUND

360deg MOTION SENSOR

180deg MOTION SENSOR

CONECTION BOX - IP RATEDSWITCHBOARD

POWER SUPPLY LED / DRIVER

OUTLET CONNECTED TO LIGHTING

DIMMER

GRAPHIC SCALE

02/08

2015/06/21LIGHTING CONCEPTS. EXTERIOR - ENTRANCE

E: 1/100

TO DETERMINE AN APPROPRIATE LIGHTING SYSTEM FOR THEEXTERIOR IT'S ESSENTIAL TO TAKE INTO CONSIDERATION HOWTHE HOUSE IS SEEN WHILE WE APPROACHING AND HOW THELANDSCAPE HAS BEEN DESIGNED.WHEN THE EYE IS NOT DISTURBED BY ANY DIRECT VISUALCONTACT BY A LIGHT SOURCE, IT IS ABLE TO PERCEIVE ALL THELIT SURFACES, TEXTURES AND ARCHITECTURAL ELEMENTS.AT NIGHT, WE MUST TAKE SPECIAL CARE OF HOW THE LIGHT ISPROVIDED TO ENHANCE THE FEATURES OF THE HOUSE AS THEBACKGROUND IS DARK SO THE EYE IS SO SENSITIVE.

TO DESIGNED A LANDSCAPE LIGHTINGWE MUST COUNT ON GENTLE LITSURFACES AND THEIR TEXTURES BUT ALSOTHE SHADOWS THAT A LIGHT FITTING WILLCREATE. SUGGESTIVE LIGHT SOLUTION TOLIGHT UP A PATH WHERE WE WALK BY.

THE CHARACTERISTICS OF THE USED PLANSARE ESSENTIAL TO COUNT ON THE DESIGNOF A TAILORED LIGHTING SOLUTION(DENSITY, HEIGHT, SHAPE,)SHADOWS CREATED IN WALLS PROVIDES ADRAMATIC LIGHTING EFFECT ENRICHINGHOUSE'S PERCEPTION.

A SUGGESTED LIGHTING SYSTEM IN THE GARAGE IS DIVIDEDIN 2 CIRCUITS, ONE OF THEM ACTIVATED BY A MOTIONSENSOR WHICH WILL ILLUMINATE THE PERIMETERWELCOMING YOU WITH A SOFT LIGHT (ALSO, THESUGGESTED FITTINGS WILL HAVE BLOCKED THE HORIZONTALCOMPONENT, PROVIDING AN EYE-GENTLE LIGHT.THE OTHER CIRCUIT IS FORMED BY LARGE SIZE LINEARFITTING AND IT PROVIDES TASK LIGHT AS NEEDED.THE NICELY DESIGNED UNIT WILL MAKE THE GARAGE LOOKGORGEOUS.

MOD.: 2015/06/21

03/08

2015/06/21LIGHTING CONCEPTS. DISTRIBUTOR/CORRIDOR

E: 1/100

LIGHTING SYSTEM IN THE CORRIDOR IS FORMED BY THREE CIRCUITS.

- GENERAL LIGHT IS PROVIDED BY DOWNLIGHTS WHICH WILL ENHANCE THE MAIN ENTRANCE, AND ALSOENRICH THE GENERAL PERCEPTION CREATING 2 FOCUS OF VISUAL ATTRACTION IN BOTH EXTREMES OF THECORRIDOR. PLACING INTENSE LIT AREAS IN THE EXTREME AND IN THE CENTRE WILL REDUCE VISUALLY THELARGE SPACE MAKING IT MORE PLEASANT WHILE CROSSING THROUGH IT.

- A COUPLE OF TILTABLE LIGHT FITTINGS WILL BE LOCATED INSIDE THE NOOK ALLOWING A DRAMATIC EFFECTTO THE SCENARIO. IT WILL BE COMPLETED WITH A RECESSED LIGHT FITTING LOCATED INSIDE OF EACHSKYLIGHT WASHING DOWN THE WALLS WITH DIFFUSED LIGHT. THIS SECONDARY LIGHTING SYSTEM IS ANEYE-GENTLE WAY TO LIT UP THE SPACE AS IT'S USING REFLECTED LIGHT.

- THE THIRD CIRCUIT DEFINE A NIGHT LIGHTING SYSTEM. IT WILL BE FORMED BY 2 ELEMENTS:.- LOW POWERED LED FITTINGS INSTALLED AT A LOW LEVEL OF WALL AIMING THE FLOOR.(THEY ARE ASYMMETRIC TO ENSURE A EYE-GENTLE LEADING LIGHT AVOIDING ANY GLARE DISTURBANCE.).- RECESSED LOW POWERED LED FITTING INSTALLED AT THE TOP OF THE SKYLIGHT, CREATING A"MOONLIGHT" EFFECT, COMPLETING NICELY THE LEADING LIGHT SYSTEM.

ACCENT LIGHT:

A COUPLE OF TILTABLE DOWNLIGHTSPLACED INSIDE THE NOOK WILLENRICH THE CORRIDOR "PLAYING"WITH WHAT YOU LOCATE IN IT.THAT HIDDEN LIGHT SOURCECREATES A SUGGESTIVE ANDDRAMATIC EFFECT.

IT WILL BE CONTROLLED SEPARATELYAS IT WILL GIVE A INSPIREDCHARACTER TO THE CORRIDOR.LIGHTING EFFECT COULD BECOMPLEMENTED WITH A GENTLEWASH OF REFLECTED LIGHT COMINGFROM THE SKYLIGHTS.

MOD.: 2015/06/21

04/08

2015/06/21LIGHTING CONCEPTS. LOUNGE/KITCHEN

E: 1/100

BEING ONE OF THE REPRESENTATIVES ELEMENTS OF A HOME, THE LIGHTING SYSTEM MUST BE DEVELOPEDTAKING INTO CONSIDERATION FLEXIBILITY, FUNCTIONALITY AND CHARACTER, AS THE LOUNGE IS WHERE THESOUL OF A HOUSE LIVES.THE 3 ESSENTIAL LAYERS OF THE LIGHTING SYSTEM ARE DETERMINED ADDING FLEXIBILITY WITH A VERSATILEELECTRICAL SYSTEM, EASY TO USE.

ACCENT LIGHT AS A GENERAL LIGHT.THE GENERAL SPACE IS NOT ASYMMETRIC, SO IT IS THE SUGGESTED ACCENT LIGHTING SYSTEM.ITS FORMED BY TILTABLE'/ASSYMETRIC DOWNLIGHTS LOCATED 450mm FAR FROM WALLS USING THEM ASREFLECTORS. THAT HELPS TO SPREAD THE LIGHT TO LIT UP THE ROOM.IT WILL BE CONTROLLED BY A DIMMER TO ADJUST THEIR INTENSITY AS DEMANDED, GOING WITH THE MOOD,MAKING THE SPACE COMPREHENSIVE AND THE PERCEPTION OF THE SPACE ENHANCED.ITS FUNCTIONALITY IS IMPORTANT THEREFORE IT WILL BE CONTROLLED IN DIFFERENT POINTS. IT'S NOTNECESSARY OVERLIGHT THE SPACE TO WALK THROUGH.

A COUPLE OF WALL LIGHTS, WITHTHE HORIZONTAL COMPONENT OFLIGHT BLOCKED, WILL BE PLACEDIN BOTH LATERALS, UPLIGHTING THECEILING. IT WILL BALANCE THE LIGHTSYSTEM BASED IN DOWNLIGHT,MAKING LESS HARSH FOR THE EYES.IT CAN BE USE BY ITSELF WASHINGTHE CEILING WITH DIFFUSED LIGHTPROVIDING A RELAXING LIGHT.

THE RESTING AREA WILL BE LIT BY THE LIGHT MAINLY FROMLIGHT COMING FOR ITS SURROUNDINGS.THE FIREPLACE WILL GIVE AN ATTRACTIVE CHARACTER TO THEAREA, BEING THAT WAY MORE PRESENCE, AS WELL AS THEEXTERIOR LANDSCAPE SEEING FROM THE LARGE SIZEWINDOW.

THERFORE, I SUGGESTED A NON-INTRUSIVE LIGHTING SYSTEMUSING A GROUP OF DOWNLIGHTS WHOSE CONCENTRATEBEAM ANGLE WILL PROVIDE DIRECTLIGHT TO THE CENTRE OF THE ROOM, AS REQUIRED.IT WILL BE CONTROLLED BY A DIMMER SO IT CAN BEADJUST AS REQUIRED TO A LOW LEVEL OF LIGHT.

A COUPLE OF OUTLETS WIL BE CONNECTED TO A SWITCH TOALLOW CONTROLLING A FLOOR LAMP FROM THEENTRANCE. IT WILL ALLOW PROVIDE DIFFERENT SCENARIOSAND ATMOSPHERES AS BE ABLE TO LIGHT UP JUST A NICELIGHT UNIT FROM THE ENTRANCE. IT WILL GET A POWERFULDRAMATIC RESULT.

TASK LIGHTING, KITCHEN

AMBIENCE LIGHTING, KITCHEN

LIGHTING UNITS ARE SKILLFULLY PLACED TO ENSURETHAT THE WORKING AREAS RECEIVE DEMANDED

LEVEL OF LIGHT.THE PANTRIES WILL RECOMMEND THE INSTALLATION

OF LED STRIP VERTICALLY PLACED TO ENSURE AFREE-SHADOW LIGHTING. THEY ARE AIMED AT THE

BACK OF THE PANTRY AVOIDING A DIRECT VISUALCONTACT OF THE LIGHT SOURCE, THEREFORE EASIER

TO SEE THE LIT ITEMS STORAGE IN THE PANTRY.THEY WILL BE CONTROLLED BY A SWITCH DOOR

MAKING THE SYSTEM SO EFFICIENT.

AFTER FINISH COOKING, A TASK LIGHT CAN BE SWITCH OFF ANDAMBIENCE LIGHT COULD BE USED. RECESSED LIGHT FITTINGS WILL NICELY

WASH THE CEILING OF THE KITCHEN PROVIDING AN INDIRECT LIGHTINGEFFECT. A DISPLAY OF RECESSED LED STRIPS WILL PROVIDE A EYE-GENTLY

LIGHT ON THE PENINSULA SURFACE.

THE FIREPLACE IS A FEATURE WITHIN THE LOUNGE.A DIRECT LIGHT THROUGH A COUPLE OF ASSYMETRICDOWNLIGHTS WILL ENRICH THE WAY ITS PERCEIVED AND ITWILL HELP TO ENHANCE WHATEVER PAINTING/PICTUREWOULD BE PLACED ON TOP OF IT.

MOD.: 2015/06/21

05/08

2015/06/21LIGHTING CONCEPTS. EXTERIOR AREAS.

E: 1/100

HAVING 3 SKYLIGHTS LOCATED ABOVE THE RESTING AREA HAS GIVEN ME THE PERFECT LOCATION FOR UNITSOF RECESSED LIGHTS FITTINGS.IT IS A SIMILAR LIGHTING SOLUTION THAT IN THE INTERIOR, THE VERTICAL SURFACES OF THE SKYLIGHT WILL BEUSED AS REFLECTOR OF THE LIGHT, THEREFORE THE SPACE WILL BE LIT BY A NON-INTRUSIVE SOFT LIGHT. THEFITTINGS WILL BE CONTROLLED BY A DIMMER SO THE INTENSITY WIL BE ADJUSTED AS DEMAND.

WHAT YOU LOOK FOR WHEN YOU ARE OUTSIDE IS BEING IN MORE DIRECTCONTACT WITH THE NATURE WHILE YOU ARE HAVING A GOOD TIME WITHFRIENDS AND FAMILY WITHIN A RELAXING ENVIRONMENT. TO LIGHT THATENVIRONMENT WITH DIFFUSED LIGHT IS ESSENTIAL.

HAVING A GOOD LIGHTING WHICH ADDRESS YOUR REQUIREMENTS ISALSO OF PARAMOUNT IMPORTANCE. IT'S NECESSARY TO PROVIDE WITH AFLEXIBLE LIGHT SYSTEM. IT HAS TO BE ABLE TO BE EASILY ADJUSTED TODIFFERENT SCENARIOS AND NEEDS.

THE LIGHTING SYSTEM RECOMMENDED IS DIVIDED IN 2 ELEMENTS:

ONE LIGHTING CIRCUIT WILL BE LOCATED ABOVE THE UTILITIES. IT WILL BE FORMED BY 3 SPOTLIGHTSPROVIDING THE DEMANDED TASK LIGHTING. THE LIGHT WILL BE PERFECTLY AIMED TO THE WORKINGSURFACE. THE DESIGN WILL ENSURE A FREE GLARE DISTURBANCE LIGHTING SYSTEM IN THE DECK.

TO PROPERLY DETERMINE A LANDSCAPE LIGHTING SYSTEM IS NECESSARY TO KNOW THESURROUNDINGS OF THE HOUSE. DEPENDING ON THE CHARACTERISTICS OF THE AREADEFINED OUT OF THE HOUSE WILL BE USED AS PLAYGROUND, RESTING AREA OR SIMPLY ASUGGESTIVE BACKGROUND FORMED BY THE VEGETATION.HOWEVER, APART FROM TASK LIGHTING WHEN NEEDS, A LIGHTING SYSTEM WILLENHANCE THOSE ELEMENTS CREATING A TEXTURED BACKGROUND, THROUGH A SUBTLEAND SOFT LIGHT, GIVING DEPTH TO THE GENERAL PERSPECTIVE.

FOR INSTANCE, IT DEPENDS ONWHAT IS ON THE OTHER SIDE OFTHE SMALL WALL, WHICH CLOSESPART OF THE MAIN DECK, ADIFFERENT TYPE OF RECESSEDLIGHT FITTING MAY BE REQUIREDAS THE LIGHT PROVIDED ISCOMPLETELY DIFFERENT. (EVEN AHIDDEN SPOTLIGHT MAY BE GREATTO UP-LIGHT A TREE PROVIDING ASUGGESTIVE EFFECT WHICH WILLBE A PERFECT VISUALCOMPLEMENT WHILE ENJOYINGA GATHERING IN THE DECK.

I FOUND APPROPRIATE SUGGESTING AGAIN ALOCATION OF A NON-INTRUSIVE LIGHT SYSTEM INSIDE

THE SKYLIGHT. IT WILL MAKE THAT SPACE SO COZYAND INTIMATE (IT CAN BE CONTROLLED BY THE

MASTER BEDROOM THROUGH A 2 WAY SWITCH,ADDING AN EXTRA VALUE TO IT)

A SUBTLE LANDSCAPE LIGHTING WILL BE THE PERFECTCOMPLEMENT FOR THIS SUGGESTED SOFT LIGHT(IN ADDITION OF THE LIGHT OF THE STARTS THE

SYSTEM WILL ALLOW THE USER TO ENJOY)

E: 1/100

A DIMMABLE CIRCUIT FORMED BY ANASYMMETRIC DOWNLIGHT AND A COUPLE OFWALL LIGHTS LOCATED ON THE OPPOSITESIDE, WILL PROVIDE A NICE INDIRECT LIGHT. ITWILL GIVE CHARACTER TO THE SMALL SPACEAS A TRANSITIONAL SPACE THAT CONNECTSBOTH THE EXTERIOR WITH THE INTERIOR.

MOD.: 2015/06/21

06/08

2015/06/21LIGHTING CONCEPTS. MASTER BEDROOM, EN-SUITE

E: 1/100

IP RATED LOW POWERED LED STRIP LOCATED IN THE SIDE OF THE STEP FORMED BY THESHOWER GIVING A SUBTLE WASH OF LIGHT TO THE LATERAL OF THE BATH.

TINY 2W LED DOWNLIGHT AIMING DIRECTLY THE BATHROOM. IT'S AN IDEAL LIGHT FORTAKING A RELAXING BATH AND ALSO USEFUL WHEN YOU FEEL LIKE A READING. IT WOULD BECONTROLLED EITHER SEPARATELY OR AT THE SAME TIME THAT THE LED STRIPS, WHICH CREATE

A SUGGESTIVE ATMOSPHERE LIT WITH SOFT LIGHT.

A LOW POWERED LED PLACED UNDERNEATH THE VANITY. IT WILL AIM THE WALLAVOIDING ANY UNDESIRABLE REFLECTION ON THE FLOOR (DEPENDING ON HOW

GLOSSY THE TILES ARE, IT MAY CREATE GLARE DISTURBANCES).

A LIGHTING FITTINGS PLAY AN IMPORTANT PART OF THEFINAL DESIGN, SO IT'S IMPORTANT TO COUNT ON THEOTHER ELEMENTS (MIRROR, VANITY, BASIN).HOWEVER I MAY SUGGEST ONE LIGHTING SOLUTION IALWAYS FIND ELEGANT:A CLUSTER OF 3 MINI PENDANTS LOCATED AT ONE SIDETO THE MIRROR AND A UNIT LOCATED TO THE OTHERSIDE PROVIDES AN AMAZING EFFECT TO THE WHOLE.

WHAT YOU REALLY NEED IN A WALK-IN WARDROBE IS AFREE-SHADOW LIGHTING SYSTEM WHICH COMPLETELY FILLSTHE ROOM WITH DIFFUSED LIGHT. THAT LIGHT WILL BEPROVIDED BY A RECESSED LARGE SIZE LINEARFLUORESCENT LIGHT. IT IS A SOPHISTICATED ANDNON-INTRUSIVE LIGHTING SOLUTION.

A COUPLE OF MINI PENDANTS FRAMING THE BED WILL PROVIDE AN ELEGANT LIGHTING SOLUTION, ASGENERAL LIGHT COMPLEMENTING THE LIGHT PROVIDED BY REFLECTION IN THE OPPOSITE WALL OFTHE ROW OF DOWNLIGHTS.THEY WILL ALSO WORK AS A PERFECT READING LIGHT AS THEY WILL BE CONTROLLED SEPARATELY BYA DIMMER WHICH PROVIDES A COMPLETE FLEXIBILITY.

i WAS TEMPTED TO PLACED A COUPLE OF DOWNLIGHT TOTHOSE WALLS BUT IN MY OPINION, AN OVER LIT SPACE ISAS BAD AS AN UNDER LIT. (AND YOU WILL NEED SPACEFOR UTILITIES, SUCH A RAIL TOWEL, ETC...)THE ELEMENTS OF THE EN-SUITE ARE ENHANCED BY THEIROWN LIGHT AND THEY WILL SPACE WITH NO LIGHT FORTHEM TO "BREATH".

A RECESSED LED LIGHT WILL PROVIDE THE ESSENTIAL LIGHTAT NIGHT. THE LOCATION HIDDEN IN THE SMALL CORRIDORENSURES A NOT DISTURBINGLIGHTING SYSTEM.

A ROW OF DOWNLIGHT ARE INSTALLED CLOSE TO THE WALLTO USE IT AS REFLECTOR. THEREFORE, THE ROOM WILL BEFILLED WITH REFLECTED LIGHT WHILE THE WALL IS NICELYWASHED WITH LIGHT.IT WILL BE CONTROLLED BY 2 WAY SWITCH WILL MAKEPERFECT AS A GENERAL LIGHT.

BEING CONTROLLED BY A 2 WAYSWITCH, BOTH SIDES OF THE BED,ENSURES ITS FUNCTIONALITY.

DEPENDING ON THE FINALDESIGN, SOME LED STRIPSCOULD BE STRATEGICALLYLOCATED IN SOME SHELVESTO PROVIDE A LOW LEVEL OFLIGHT AS THE REQUESTED.

MOD.: 2015/06/21

07/08

2015/06/21LIGHTING CONCEPTS. BEDROOMS - MEDIA ROOM - STUDIO.TO PROVIDE THE NECESSARY GENERAL LIGHT IIN THE BEDROOMS I SUGGESTED A SIMPLEAND WELL DESIGNED PENDANT LOCATED IN THE CENTRE OF THE ROOM WHICH WILLFILL THE SPACE WITH DIFFUSED LIGHT.A SIMPLE DRUM CAN BE USED TO LIGHT UP THE ROOM. (IT COULD BE CUSTOM MADE TOMATCH COLOR OF WALLS, BEDCLOTHES, ADDING A PERSONAL TOUCH TO THE ROOM).A DIFFUSER WILL BE LOCATED AT THE BOTTOM TO ENSURE A EYE-FRIENDLY LIGHTDISTRIBUTION.

HAVING NOTICED THAT THE DISTRIBUTION OF THEBEDOOMS ARE QUITE ACCURATE, WE CAN SUGGESTWALL LIGHTS AS SPECTACULARLY WELL DESIGN ASTHE ONE AS SHOWN. LOCATED AT THE RIGHT HEIGHT,IT IS A PERFECT CHOICE AS READING LIGHT.

E: 1/100

A RECESSED ASYMMETRIC LED WILL BE PLACE IN A RIGHTPLACED TO PROVIDE A MORE THAN USEFUL NIGHT LIGHT.IT WILL BE CONTROLLED BY A 2 WAY SWITCH LOCATED INEACH SIDE OF THE BED.

THE SIMPLY LINES OF A LINEAR FLUORESCENT FITTINGWILL PROVIDE A DEMANDED DIFFUSED TASK LIGHT.IT MUST BE COMPLETE THE DESIGN OF THE WHOLE UNIT.AND LED STRIP LOCATED UNDERNEATH THE VANITY WILLPROVIDE A EYE-GENTLE LIGHT AT NIGHT.

THE LIGHTING SYSTEM IN THE OFFICE HAS BEEN DIVIDEDIN TWO CIRCUITS, ONE OF THEM DIMMABLE.

THEREFORE, THE INTENSITY OF LIGHT CAN BE ADJUSTEDAS DEMAND AS WELL AS A AMBIENCE LIGHT. THERE IS

NOTHING BETTER THAN A RELAXING ENVIRONMENT TODO PAPER WORK OR TO SWIM ON THE INTERNET.

AN APPROPRIATE LIGHTING SYSTEM FOR A MEDIA ROOM IS WHATPROVIDES YOU A SOFT AND LOW LEVEL OF LIGHT TO HELP YOUREYES TO ADAPT TO THE DIFFERENT INTENSITIES OF LIGHT PRODUCEDBY THE SCREEN, AND TO FULFILL THE ROOM WITH LIGHT WHEN IT'STIME TO TIDY UP.A DIMMABLE CIRCUIT CONTROLLING LIGHT FITTINGS WITH THEHORIZONTAL COMPONENT OF LIGHT BLOCKED WILL DO PERFECTLYTHE WORK.THEY MAY BE AS UNIQUE AS THE ONES SHOWN BELOW.

MOD.: 2015/06/21

08/08MOD.: 2015/06/21

2015/06/21LIGHTING CONCEPTS. NIGHTLIGHTA 'NIGHTLIGHT' SYSTEM IS ESSENTIALLY A GROUP OF LIGHT FITTINGS THAT PROVIDE A SOFT AND LOW INTENSE LIGHTAND IT'S USED TO HELP THE USERS TO REACH THE UTILITIES OF THE HOUSE THROUGH A EYE-GENTLE LIGHT.WHETHER YOU ARRIVING AT HOME WITH YOUR CAR, GETTING OUT FROM YOUR BEDROOM TO THE KITCHEN OR YOUWILING TO GO TO THE KITCHEN TO HAVE A GLASS OF WATER AFTER HAVE BEEN ENJOY MOVIE, A LEADING LIGHT WILLSOFTLY LIGHT UP YOUR STEPS...

HAVING CLEAR THAT THE PROPOSED LIGHTING SOLUTION WILL USE SOFT LIGHT, FREE OF ANY GLARE DISTURBANCES, WE JUST NEED TO WORK OUT AND SUGGESTA SENSIBLE WAY TO CONTROL IT.

LIGHT FITTINGS LOCATED IN COMMON AREAS WILL BE ACTIVATED THROUGH A MOTION SENSOR. THAT WAY, NO MATTER WHERE THE USERS WERE OR WHAT THEYMAY KEEP THEIR HANDS BUSY, WHETHER THE LEVEL OF LIGHT IN THE SPACE IS NOT ENOUGH FOR THEY TO CROSS AN SPACE, THE MOTION SENSOR WILL SWITCHON THOSE LIGHTS. (LEVEL OF LIGHT AND TIME DURING THOSE LIGHTS ARE SWITCHED ON CAN BE EASILY SET).

FITTINGS LOCATED AT PRIVATE PLACES SUCH BEDROOMS OR BATHROOMS, WILL BE ACTIVATED BY A SWITCH. THAT WAY TO WILL HAVE FULLY CONTROL OF THEMAND THEY WON'T BE ACTIVATED UNNECESSARY.

1 /17

inl_0013

Quail Ridge Country Club’s Showroom II.

82 Rainbow Falls Road. Kerikeri. Northland

Stefano La Cava. Lighting Solutions.

Mb: 021 773 221; [email protected]

40 High street Island Bay. Wellington 6023 NZ

JUNE/2015 (+64) 220 156 096 [email protected]

Lighting Specifications. Interior. 2015/07/06

Type A1/2:

Garage/Laundry.

G0601-

(Formalighting)

To provide general light, we suggest using

this high quality system: recessed Trim linear

luminaire with overlapped tubes providing

continuous line of light with an even light

distribution. AS a task light above working

surfaces, it’s also a great non-intrusive

system to provide a demanded task light.

Housing made of extruded aluminium with

die-cast end caps mechanically attached

with no exposed fasteners. Easy installation

via adjustable brackets. Reflectors with pure

aluminium. Opal diffuser.

White powdercoated. Electronic Ballast

(surface mounted and suspended options

are also available)

G0601154TOFA.11: Dim: 2368L x 70H x 118D;

Cut Out: 60mmx 2350mm

Lamp: 2x 28W 3000K Fluorescent

G060154TOFA.11: Dim: 1184L x 70H x 118D;

Cut Out: 60mmx 1175mm

Lamp: 1x 28W 3000K Fluorescent

(Tubes included)

Type B1: Garage.

1914.0007.4

(Macrolux)

Nicely designed wall fitting with glass

diffuser. Steel bodied with silky white finish. It

belongs to a family of fittings of different

sizes and finishes as shown in the next page.

Dim.: 112mmL 112mmH x 100mmD

Lamp: 1 x 50W G9 Halogen

(Lamp included)

mailto:[email protected]

2 /17

Type B: Garage

1914.0011.4

(Macrolux)

Surface mounted fitting with glass diffuser.

Steel bodied with silky white finish.

I suggested using the next step up of the

family as it allows us to use a higher lamp

increasing the light level in both extremes of

the garage. it will provides an eye-gentle

task lighting and they will visually balance

with each other.

(available: texturized black, aluminium

grey, brushed stainless, glossy stainless steel)

Dim.: 282mmL 112mmH x 100mmD

Lamp: 1 x 100W R7s 117mm Halogen

(Lamp included)

Type C: Wardrobe. FTM-TP-025-AW-WW-02

(Signcomplex)

A surface mounted IP65 LED strip unit to be

installed inside storage units. Installed just

above the frame of the door ensures a nice

wash of light aiming the storage items free

of glare disturbances. I can be controlled

by a switch door or a motion sensor

(recommended when sliding doors)

Dimensions: 1500L x 40Wx 39H

Lamp: 20W 24V 2700-3200K LED

Power Supply: 20-30W 24V (P. Supply included)

Type D1: General Light

RA07.K30D38.11

(Formalighting)

Recessed 10W LED with asymmetric light

distribution. Its deep regressed lamp position

designed for minimum glare aiming the

vertical surfaces used as reflectors.

Dim.: 99mmDiam 116mmH

Lamp: 1x 10W 3000K 38Dg LED

Driver: 6-12W 350mA 12V - Dimmable

(Lamp and driver included)

3 /17

Type D2: General Light

RA05.K30D38.11

(Formalighting)

Recessed 10W LED with symmetric light

distribution. Made of cast-die aluminium

with white powdercoated finish.

The lamp is slightly set back minimizing its

glare. Controlled by a dimmable driver the

intensity can be adapted on demand.


Lamp: 1x 10W 3000K 38Dg LED

Driver: 6-12W 350mA 12V - Dimmable


Type D3: Lounge

5333.11

(Formalighting)

We used the smallest version of the family to

add a suggestive lighting in the centre of

the lounge. Using a narrow beam bulb will

ensure a gentle light on a centred table.

It’s a nice complement for the general light.


Lamp: 1x 4W MR11 3000K (24Dg)

Driver: 3-6W 350mA 12V

(Lamp and transformer included)

Type E1: Bedroom

131.0010.4

(Macrolux)

This fantastic and unique design of a

recessed light fitting, which installed at a

right height, is a perfect reading light.

It’s made of aluminium with black or white

finish. It can house 1W LED lamp but I

suggest the Halogen version as it allows us

to use a bulb with higher output.

When the oscillating part is closed, a micro-

switch turns off the lamp automatically.

Dim.: 75mmWx 195mmH x 87mmD

Cut Out: 50mmW x170mmH

Lamp: 1x 20W GY6.35 12V Halogen

(Lamp and transformer included)

4 /17

Type E2: Bedroom

1612.0002.44

(Macrolux)

This elegant and nicely design wall fitting will

allow you to put the light in the right place.

It has an extension of 300mm housing a

narrow beam 1.2W LED. It makes perfect to

use as reading light.

Made of lacquered aluminium in white and

black with an adaptable arm covered with

polyurethane.

(Different installation options available.

Direct installation in wall has been quoted)

Dim. base: 46Hx 20W x 30D

300mm Extension

Lamp: 1x 1.2W 320mA 10Dg

Driver 1.122426: 6W 350mA 12V

(Remote Driver included)

Type F1/2: Bedroom 500mm DRUM

(YOUG Design)

As you “dress” the bed, you complete the

scenario with a simple drum with a fabric

you like. Steel bodied with white powder

coated Translucent fabric (standard quality)

will be used to shape the drums.

It will fulfil the space with diffused light and it

will add a suggestive effect through a back

lit texture. Acrylic Opal polycarbonate

diffuser at the bottom.

Dimensions: 500Ø x 120W x 240H

Fixing area: 120mm Diam

Lamp: 3 x 60W E27

(Lamps included)

5 /17

Type G: Leading Light

(Suggestion 01)

125.0021.4

(Formalighting)

We have a fantastic opportunity to use a

greatly designed and unique light fitting as

a “leading night”. A recessed Ip66 white

metal unit will disappear for about 1cm

from the surface.

3.4W LED will wash gently with light the

surfaces helping you to reach what you

need at night. A proper positioning on the

walls will ensure a light without undesirable

reflection which may disturb the users at

night when the sight is so sensitive.

Dim.: 210mmH x 18mmW x 46mmD

Lamp: 1x 3.2W 24V 3000K LED

Plaster box ref. 131.0008 (Plaster Kit)

Driver ref. 1.122156: 10W 24V DC

(P. Supply included)

Type G: Leading Light

(Suggestion 02)

LN11125AB

(Luce & Light)

However, there is a fantastic option we can

use to provide the leading light at night.

It’s an asymmetric recessed fitting that

ensures an eye-gentle lighting system at

night through a 1W LED.

Steel bodied with mate white finish.

Dimensions: 70H x 60H x40D

Cut out: 55mm x38mm

Lamp: 1W 350mA 3000K

Driver ref. A13350VL: 1-3W 350mA 12V


6 /17

Type H: Skylights

RD22.11

(Formalighting)

A skylight is an interesting element which

adds a suggestive lighting effect when it

captures daylight. It depends on its design it

will add either a direct light to the space or

a diffused one if the sun rays is reflected in

the vertical surfaces. Providing a similar

lighting effect through reflected artificial

light, adds a priceless value to any space.

An IP 44 recessed light fitting is installed at

the top of it connected to the night light

circuit creating a suggestive “moonlight

effect. It’s made of die-formed galvanised

steel with frosted safety glass.

Dim: 90H x 90W 131D; Cut Out: 80Hx 80W

Lamp: 4W GU10 240V 3000K

(Lamp included)

Type I: Skylights

G040130BOFA.K30

(Formalighting)

Installing closer a recessed light fitting with

higher output will provide a beautiful

diffused light filling the space.

It will make the skylight looks the light fitting.

In this case, we’ll use an LED unit of the Gola

40 family. It’s housed in extruded aluminium

with die-cast end caps. Extruded ribbed

satin white diffuser. Reflector made of super

pure aluminium with miro-silver coating.

Passive dissipation, inclusive of integral driver

220-240V 50/60Hz.

Dim: 898L x 50W 80D; Cut Out: 884Hx 80W

Lamp: 30W GU10 240V 3000K

(Driver included)

7 /17

Type J1-2: Night Light

PF260-

(Luce & Light)

Surface mounted LED strip installed

underneath the vanity. It’s fixed with

brackets and can be tilted toward the

vertical surface ensuring a reflected and

soft lighting system. Therefore there won’t

be undesired reflections on the likely glossy

floor covered with tiles.

Aluminium bodied with silver coating finish

coming with PMMA diffuser.

J1-PF26015DA Dimensions: 448L x 25W x19D

Led TYPE: 4.8W/m 24V 3000K

J2-PF26025DA Dimensions: 873L x 25W x19D

Led TYPE: 4.8W/m 24V 3000K

P. supply AS24010X2: 10W 24V (76x36x18) (P. supply included)

Type K: Mirror 199.0002.14

(Macrolux)

The most suitable fitting to provide a

demanded level of light depends directly

on the final design of the bathroom and

how will be the mirror which will be installed.

It was to be coherent with the whole.

However, I suggested this fitting because I

liked its design with simple lines and it will fills

the room with diffused light, essential factor

to take into consideration to light your face

through a shadow-free light.

Steel bodied with brushed steel finish

coming with a diffuser made of

methacrylate for a uniform lighting result.

Dimensions: 530Ø x 112W x 100H

Lamp: 1x 36W 2G11 3000K Fluorescent

(Lamp included)

8 /17

Type L: Bathroom

RE47.11

(Formalighting)

IP 54 Rated round downlight with frosted

safety glass. Trim is cast aluminium bodied

with silicone water-sealed.

Independent steel housing

Dim: 84Diam x 107D;

Cut Out: 73mm Diam

Lamp: 10W GU10 3000K

(Lamp included)

Type M: Office 1228.K30.75

(Formalighting)

To provide the necessary light in the office, I

suggest either using one of “the big

brothers” of the family of fittings used in the

garage, or this fantastic linear fitting with an

adjustable screen which allows you to

adjust the light distribution (from task light to

mood light with an easy movement).

Steel bodied, aluminium extruded screen

with acrylic opal satin diffuser.

Dimensions: 956mmL x 126W x 79D

Fixing area: 956mmL x 36mmW

Lamp: 1x30W 3000K LED

(Dimmable driver included)

Type N. En-suite RD39.K30D40.11

(Formalighting)

This tiltable tiny IP 44 downlight properly

installed above the bathroom will provide

you with a soft light and it allows to read

while taking a relaxing bath. Together with

the LED strips, which provide indirect light,

will create a suggestive ambience.

Made of cast-aluminium with optimal

passive thermal management. White finish

Dimensions: 49Ø x 37H; Cut out: 44Ø

Lamp: 1x 2W 3000K 40Dg

Driver: mA?

(Driver included)

9 /17

Type O: En-suite

(suggestion 01)

14SPWH01

(Karboxx)

Taking into consideration the en-suite as

one of the feature of the house, I might

suggest a unique an elegant lighting system

for the mirror.

Having a closer idea of the final design will

be essential,. However, looking at what I

suggest may otherwise help you to design it.

Few beautifully designed mini-pendants of

frosted glass providing diffused light

installed framing the vanity will look

gorgeous. Installing a large size mirror over

the vanity and counting on the reflection of

the fittings in will look even better.

Blown glass in white (available in black

glass). Cord and fixture black

Dimensions: 150mm x 900mm

Lamp: 1x40W E27

(Lamps included)

Type O: En-suite

(suggestion 02)

1920.0001/2

(Macrolux)

Other option that I would like you to take

into consideration is this unique light fiting

Having a closer idea of the final design will

be essential. However, looking at what I’m

suggesting may help you to design it.

This nicely design and unique hybrid

between a recessed and a ceiling-

mounted lamp, a fusion between a lighting

source and a fixture provides an exclusive

character to the bathroom.

Diffuser made of fiberglass and fabric

patch-work. Powder coated steel bodied.

Dim.1920.001/2: 118Diam 500/750H x 100D

Lamp: 1x50W GU5.3 MR16 12V HAL

(Lamp and transformers included)

10 /17

Type P: Kitchen G09511DI39TOUP

(Formalighting)

Up & Down lighting system controlled

separately. It will fill with diffused light the

wardrobe and having both components

separately will provide eventually a gentle

indirect lighting when you is not necessary

to use the full. It will minimize any possibility

to disturb the person who stay in bed.

Housing made of extruded aluminium with

die-cast end caps mechanically attached

with no exposed fasteners. Easy installation

via adjustable brackets. Reflectors with pure

aluminium. Opal diffuser.

White powdercoated. Electronic Ballast

(surface mounted and suspended options

are also available)

Dim: 1832L x 95W x 150H

2200mm installation height

Lamp: 3x 39W T5 3000K Fluorescent

(Tubes included)

Type Q: Master Bedroom

(suggestion 02)

31.0006.81

(Macrolux)

As elegant as unique way to provide

reading light and character to the Master

bedroom.

There are few colour to choose from, as

shown in the picture aside.

550mm long mini pendant with white fabric

effect finish.


Lamp: 1x100W E27 HAL

(Lamps included)

11 /17

Type R: Kitchen

PF1625DA/35DA

(Luce & Light)

LED strip mounted vertically inside the

pantry aiming the wall, providing an even

lighting at the shelves. The same profile is

used to provide task lighting in the kitchen.

It will be installed recessed under the

cabinets. Anodised aluminium bodied with

PMMA diffuser

Dimensions: different lengths x 25H x19D

Lamp: 15W/m 24V 3000K LED

(P. supply included)

Type S: Kitchen

RA11.K30D38.11

(Formalighting)

A row of three recessed Square washers will

be installed recessed in the volume formed

above the kitchen peninsula. They will

provided a general light washing with light

the ceiling. It complement perfectly the

task lighting in the kitchen giving a nice

indirect lighting effect, which can be left

when the kitchen is not used, enhancing

the way it’s perceived.

Dimensions: 99mmL x 99mmH x 117mmD

Cut out: 94mm x 94mm

Lamp: 10W 3000K 38Dg LED

(Dimmable driver included)

Type T: Kitchen

12SPWH01.DIMM

(Karboxx)

Amazingly designed family of fittings that I

suggested to use above the peninsula and

framing the fire place.

White painted aluminium with opaline

methacrylate. It’s dimmable so the intensity

can be adjusted as demanded.

Dims: 1240mmL x 150mmW 144mmH

(1900mm Installation Height)

Fixing plate: 80mm Diam

Lamp: 2x21W T5 Dimmable

(Tubes included)

12 /17

Type U: Lounge_Fireplace

12PAWH44

(Karboxx)

The fact of putting a fitting which belongs to

the same family of the fitting that gracefully

divide the kitchen of the lunge, which

produce such a unique light distribution, will

connect visually the 2 areas of the it.

White painted aluminium with opaline

methacrylate.

Dim.: 440mmL x 150mmH 10.5mmD


Lamp: 2x11W E14 Fluorescent

(Lamps included)

Type V: Lounge_dinning

10SPWH01

(Karboxx)

Suspended lamp with shade in Honeycomb

canvas fabric, in white or black. Ceiling

fitting in white-painted metal. It’s coming

with an opaline diffuser at the bottom,

which it’s important for ensuring a gentle

light distribution.

It’s clear that even though it doesn’t belong

to the same family, the fragmentally way to

come out the light makes talking coherently

with the other suggested light fittings.

The fittings used in the lounge have to be

decided at the main time that the rest of

the pieces and furniture which will give

character to the whole space will connect

the areas with each other

Dim.: 600mm Diam x 410mmH



Lamp: 3x42W E27 Halogen

(Lamps included)

13 /17

Type W: Media Room

10SPWH01

(Karboxx)

Wall-mounted lamp with adjustable screen

in white painted metal or brushed nickel.

A dimmer will control the light fittings to

adjust the intensity, quite essential for a

lighting system of a Media Room.

Being adjustable allows you to adjust the

amount of light that is washing the walls

and the ceiling. It means that lighting

system is so gently with the eye and so

versatile with the ambience.

Dim.: 600mm Diam x 410mmH



Lamp: 3x42W E27 Halogen

(Lamps included)

14 /17

Lighting Specifications. Exterior. 2015/07/07

Type Ex1: Main Entrance

LT10125LAV

(Luce&Light)

Enhancing the way the main entrance is

perceived is of paramount importance.

Placing a couple of up lighters in each

corner of the column that frame the

entrance will magnify it.

This IP 67 small in-ground fitting, will provide

an up-lighting effect which will gracefully

balance the light coming from behind from

the fittings nearby the door.

Body in anodized aluminium and tempered

glass with anti-scratch treatment.

With outer casing (ref: WC4010)


Lamp: 1x 2W 500mA 3000K (20Dg)

Driver ALS500IP67 : IP67 1-6x 2W 500mA 24V

(Driver included, shared by 4 units)

Type Ex2: Garage LT20005DAV

(Luce&Light)

I suggested located a couple of in-ground

uplighter from the same family but with a

different lighting effect. In this occasion, I

use a more powerful LED but with a wide

angle with a frosted diffuser.

It will wash with diffused light the sides of the

garage. Placing a couple of plants in

between can provide an interesting effect.

Dim.: 71.5mmDiam 99mmH

Lamp: 1x 6W 350mA 3000K (Flood light)

Driver AS24070X3 : IP67 70W 350mA 24V

(Driver included, shared by 4 units)

15 /17

Type Ex3.1: Lantern 1966616

(Platek)

Original designed wall light coming in 2

versions: vertical and horizontal fixing.

The proposed combination will provide a

unique character to the entrance reflecting

on the horizontal and vertical surfaces.

Body made of extruded aluminium alloy,

corrosion resistant. Ring and fixing base

made of die-cast aluminium alloy, corrosion

resistant. Protection by means of iridite,

epoxy powder base coating and polyester

painting. LED light source integrated in the

aluminium body to avoid vandalism.

Product with no visible screws and

completely hidden fixing plate.

Dim.: 313mmL 56mmW 250mmH

Lamp: 1x 7W 3000K LED (Ex3.3 1x14W 3000K)

(Driver included)

Type Ex3.2: Lantern 1966616

(Platek)

Horizontal placed. It will use as well the

ceiling to distribute the light.

When it’s vertical placed, the light wash

down the wall creating an original lighting

effect. It belongs to a big family that can

be use around the landscape.

Body made of extruded aluminium alloy,

corrosion resistant. Ring and fixing base

made of die-cast aluminium alloy, corrosion

resistant. Protection by means of iridite,




Product with no visible screws and

completely hidden fixing plate.

Dim.: 313mmL 56mmW 250mmH

Lamp: 1x 7W 3000K

(Driver included)

16 /17

Type Ex4: Garden

9402116

(Platek)

This fitting has a fantastic way to spread the

light downwards in all directions.

Mounted on spike allows you to place it

freely in your garden.

Body in black anodized and corrosion

resistant aluminium alloy. Anti-UV

transparent polycarbonate diffuser - 15 mm

thick. Carbon fibre rod. A4 stainless steel

screws. Protection by means of iridite,




Product with no visible screws.

Product supplied with one power supply

cable 5m in length.


Lamp: 1x 11W 3000K 360Dg 240V

(Driver included, c/w 5m wire)

Type Ex5.1/2: Skylights

RD/E18.K30.11

(Formalighting)

I’ve said previously the great idea of using

the surfaces that formed the skylight as

supports and reflectors of a lighting system.

It is a non-intrusive and eye-friendly way to

provide a demanded light in the exterior.

They will be controlled with a dimmer to

ensure a flexible system. In its lowest level

will beautifully create a moon light effect

perfect for relaxing evenings spent outside.

Galvanized Steel bodied with a trim made

of die cast aluminium. Frosted safety glass.

RD18.k30.11 Dimensions: 175L x 175W x141D

Cut out: 165mm x165mm

Lamp: 25W 3000K 12V

Re18.k30.11 Dimensions: 90L x 90W x141D


Lamp: 12W 3000K 12V

(Dimmable Driver included)

17 /17

Type Ex6: Deck

3070116.11

(Platek)

Fantastic high quality and fully adjustable

spotlight that will allow a task lighting where

is needed and accent lighting if desired.

Body and wall mounting made in corrosion

resistant and painted aluminium alloy.

Protection with anodic treatment, epoxy

powder base coating and polyester

painting. Diffusing opal PMMA cover.

Product with no visible screws.


Fixture: 85mm DIam

Lamp: 1x 9W 3000K LED

(Driver included)

Type Ex7: Decks

3455911.08

(Platek)

Frame is a beautifully designed IP 65 fitting

with simple lines that wash the surfaces with

light with an asymmetric distribution.

It’s for that because is a perfect choice to

light up surfaces with a fitting without any

glare disturbances

Die-cast aluminium body and locking ring.

Protection by means of iridite, epoxy

powder base coating and polyester

painting. A4 stainless steel screws. 6mm

extra-clear flat tempered glass cover.

External power supply by 12V DC

transformer. Nylon sleeve to be ordered

separately. Product supplied with one

power supply cable 0,3m in length.

Dimensions: 205mmL x 50mmW x72mmD


Lamp: 5W 3000K 12V 54Dg Asymmetric

(Transformer included)

inl b013 - inlucem.co.nz€¦ · project: quail ridge's showhouse ii 82 rainbow falls road,...

Documents