hyster s30-40fts lift truck dimensions

Head ClearanceWhen Seat Is In

Depressed Position(see chart lower left)

15 15

19

10

11

11

37

22 35

16

38

J

G

F

Standard Tall OHG83 (2088)

Optional Short OHG80 (2021)

44.4(1128)

22

21

Standard TreadS30FT - 37.0 (940)

S35FT/S40FTS - 38.8 (985)

37.0(940)

2122

For 90˚ Stacking Aisle, Add Outside Turning RadiusPlus Dimension Plus Load Length.

Equal Intersecting Right Angle Aislewith 42.0 (1067) Wide Load and

48.0 (1219) Long Load:S30FT 69.3 (1761)S35FT 70.6 (1794)

S40FTS 71.5 (1817)

Tow Pin10.1 (255)

Standard

Optional

Wide Tread42.7 (1085)

18

Step HeightMid-Point

L

Hyster S30-40FTS Lift Truck Dimensions

Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).Truck shown with optional equipment - strobe, light package and TouchPoint™ e-hydraulics with adjustable armrest and LP tank.

2

Seat Type Standard Tall OHG Optional Short OHGNon-Suspension 42.0 (1067) 39.4 (1001)Semi-Suspension 42.5 (1079) 39.9 (1013)Full-Suspension 41.8 (1061) N/ASwivel Full-Suspension 42.0 (1067) N/A

TRUCK LIFT CAPACITY LOAD CENTER F G J LMODEL lb. (kg) in. (mm) Percent Percent in. (mm) in. (mm)

S30FT 3000 (1360) 24.0 (610) 41% 21.0% 25.0 (634) 19.7 (500)S35FT 3500 (1587) 24.0 (610) 39% 21.0% 25.0 (634) 19.7 (500)S40FTS 4000 (1814) 24.0 (610) 37% 21.0% 25.0 (634) 19.7 (500)

1 Manufacturer Name Hyster Company Hyster Company2 Model S30FT S30FT

Manufacturer Designation Fortis™ Advance Package Fortis™ Advance PackageTransmission Electronic Powershift DuraMatch™ Engine Mazda® 2.0L Mazda® 2.0L

3 Rated Capacity lb. (kg) 3000 (1360) 3000 (1360)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel LP | Gas LP | Gas6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 19.7 (500) 19.7 (500)8 Tire Type - Cushion, Solid, Pneumatic Cushion Cushion9 Wheels, Number - Front / Rear 2x / 2 2x / 2

10 Lift Height, Top of Fork (TOF) in. (mm) 127 (3218) 127 (3218)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5 (140) 5 (140)

Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 27 (707) 27 (707)12 Standard Carriage Width in. (mm) 36.0 (914) 36.0 (914)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0

Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 34.8 (885) 34.8 (885)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 5F / 5B 5F / 5B16 Length To Face of Forks in. (mm) 81.6 (2074) 81.6 (2074)17 Overall Width, Standard Tread in. (mm) 37.0 (940) 37.0 (940)

Overall Width, Wide Tread in. (mm) 42.7 (1085) 42.7 (1085)18 Height, Standard Mast - Lowered in. (mm) 82 (2080) 82 (2080)19 Height, Standard Mast - Extended with LBR in. (mm) 176 (4455) 176 (4455)

Height, Standard Mast - Extended without LBR in. (mm) 150 (3806) 150 (3806)20 Height, Standard Overhead Guard in. (mm) 83 (2088) 83 (2088)

Height, Optional Overhead Guard in. (mm) 80 (2021) 80 (2021)21 Turning Radius, Minimum Outside (OTR) in. (mm) 69.9 (1775) 69.9 (1775)22 Length, Center of Wheel to Face of Forks in. (mm) 14.1 (359) 14.1 (359)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 84.0 (2132) 84.0 (2132)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 70.2 (1783) 70.2 (1783)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 10.8 (17.4) / 10.4 (16.8) N/A

Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 10.8 (17.4) / 10.4 (16.8)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)

Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)

27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)

28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2921 (12.9) / 1505 (6.7) | 3420 (15.2) / 1505 (6.7) 2921 (12.9) / 1505 (6.7) | 3420 (15.2) / 1505 (6.7)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1990 (8.8) / 1505 (6.7) | 2400 (10.7) / 1505 (6.7) 1990 (8.85) / 1505 (6.7) | 2400 (10.7) / 1505 (6.7)

29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 32.9 / 25.7 | 39.3 / 25.7 32.9 / 25.7 | 39.3 / 25.731 Weight, Standard Truck (2-Stg. LFL 82 / 127) NL lb. (kg.) 6550 (2977) 6550 (2977)

Weight, Standard Truck (2-Stg. LFL 82 / 127) RL lb. (kg.) 9550 (4341) 9550 (4341)32 Axle Loading, Static Front / Rear NL lb. (kg.) 2907 (1321) / 3365 (1530) 2907 (1321) / 3365 (1530)

Axle Loading, Static Front / Rear RL lb. (kg.) 8125 (3693) / 1146 (521) 8125 (3693) / 1146 (521)33 Tire Size, Front 18.0 x 6.0 x 12.125 18.0 x 6.0 x 12.12534 Tire Size, Rear 15.0 x 5.0 x 11.25 15.0 x 5.0 x 11.2535 Wheelbase in. (mm) 51.6 (1310) 51.6 (1310)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 3.9 (100) 3.9 (100)38 Ground Clearance, Center of Wheelbase NL in. (mm) 4.2 (107) 4.2 (107)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance\ Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 440 12 / 44043 Engine, Manufacturer / Model Mazda® FE Mazda® FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 @ 1800 RPM | 104.0 @ 1800 RPM 91.0 @ 1800 RPM | 104.0 @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™

Standard Speeds, Forward - Reverse 1-1 1-150 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.2 (38.8) 10.2 (38.8)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)

Hyster S30FT Lift Truck Dimensions

CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.

† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.

†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.

PER

FOR

MAN

CE

†W

EIG

HT

TIR

ES &

WH

LSPO

WER

TRAI

ND

IMEN

SIO

NS

GEN

ERAL

3

1 Manufacturer Name Hyster Company Hyster Company2 Model S35FT S35FT















Axle Loading, Static Front / Rear RL lb. (kg.) 8908 (4049) / 1298 (590) 8908 (4049) / 1298 (590)33 Tire Size, Front 18.0 x 7.0 x 12.125 18.0 x 7.0 x 12.12534 Tire Size, Rear 15.0 x 5.0 x 11.25 15.0 x 5.0 x 11.2535 Wheelbase in. (mm) 51.6 (1310) 51.6 (1310)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 3.9 (100) 3.9 (100)38 Ground Clearance, Center of Wheelbase NL in. (mm) 4.2 (107) 4.2 (107)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 440 12 / 44043 Engine, Manufacturer / Model Mazda® FE Mazda® FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 @ 1800 RPM | 104.0 @ 1800 RPM 91.0 @ 1800 RPM | 104.0 @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™


Hyster S35FT Lift Truck Dimensions



†† Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.

PER

FOR

MAN

CE

†W

EIG

HT

TIR

ES &

WH

LSPO

WER

TRAI

ND

IMEN

SIO

NS

GEN

ERAL

4

1 Manufacturer Name Hyster Company Hyster Company2 Model S40FTS S40FTS















Axle Loading, Static Front / Rear RL lb. (kg.) 9887 (4485) / 1410 (640) 9887 (4485) / 1410 (640)33 Tire Size, Front 18.0 x 7.0 x 12.125 18.0 x 7.0 x 12.12534 Tire Size, Rear 15.0 x 5.0 x 11.25 15.0 x 5.0 x 11.2535 Wheelbase in. (mm) 51.6 (1310) 51.6 (1310)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 3.9 (100) 3.9 (100)38 Ground Clearance, Center of Wheelbase NL in. (mm) 4.2 (107) 4.2 (107)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 440 12 / 44043 Engine, Manufacturer / Model Mazda® FE Mazda® FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 @ 1800 RPM | 104.0 @ 1800 RPM 91.0 @ 1800 RPM | 104.0 @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™


Hyster S40FTS Lift Truck Dimensions



†† Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.

PER

FOR

MAN

CE

†W

EIG

HT

TIR

ES &

WH

LSPO

WER

TRAI

ND

IMEN

SIO

NS

GEN

ERAL

5

S30-35FT, S40FTS MAST DIMENSIONSMaximum Fork Overall Lowered Overall Extended Height Free-Lift (TOF)Height (TOF) † Height with LBE without LBE with LBE without LBE

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)2-STAGE LIMITED FREE-LIFT (LFL) VISTA® MAST

83 (2132) 61 (1530) 133 (3355) 107 (2706) 5 (140) 5 (140)

127 (3232) 82 (2080) 176 (4455) 150 (3806) 5 (140) 5 (140)

2-STAGE FULL FREE-LIFT (FFL) VISTA® MAST

114 (2918) 76 (1930) 164 (4161) 139 (3512) 27 (707) 53 (1356)

126 (3218) 82 (2080) 176 (4461) 151 (3812) 33 (857) 59 (1506)

3-STAGE FULL FREE-LIFT (FFL) VISTA® MAST

175 (4450) 78 (1980) 224 (5673) 198 (5024) 29 (757) 55 (1411)

187 (4750) 82 (2080) 236 (5973) 210 (5324) 33 (857) 59 (1511)

198 (5050) 88 (2230) 247 (6273) 222 (5624) 39 (1007) 65 (1661)

216 (5510) 94 (2380) 265 (6723) 240 (6074) 45 (1157) 71 (1881)

† Lift heights over 164.0” (4161 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.

Total approximate weights listed include mast, standard carriage, load backrest extension and 70 lbs. LP tank and tank bracket.

RL = Rated Load NL = No Load LBE = Load Backrest Extension

6

Hyster S30-40FTS Mast Specifications

TRUCK CONFIGURATION:• 3-Stage FFL mast at Highest Non-High Lift (HNHL) 164.0” (4141 mm) Maximum Fork Height (MFH) for S30-40FT.• 36.0” (914 mm) Standard carriage with load backrest extension (LBE).• Basic truck equipped with the Mazda® 2.0L gasoline engine with single-speed electronic powershift transmission.

1000

2000

3000

4000

5000

0 10 20 30 40 50 60

S30FT

S40FTS

S35FT

RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE

U. S. CUSTOMARY

RATE

D LO

AD (l

bs)

LOAD CENTER (in)

Standard 24 inch Load Center

RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE

METRIC

RATE

D LO

AD (k

g)

LOAD CENTER (mm)


500

1000

1500

2000

2500

0 250 500 750 1000 1250 1500

S30FT

S40FTS

S35FT

RATED LOAD vs. LOAD CENTERINTEGRAL CARRIAGE

METRIC

RATE

D LO

AD (k

g)

LOAD CENTER (mm)


500

1000

1500

2000

2500

0 250 500 750 1000 1250 1500

S30FT

S40FTS

S35FT

RATED LOAD vs. LOAD CENTERINTEGRAL CARRIAGE

U.S. CUSTOMARY

RATE

D LO

AD (l

bs)

LOAD CENTER (in)


1000

2000

3000

4000

5000

0 10 20 30 40 50 60

S30FT

S40FTS

S35FT

7

Hyster S30-40FTS Lift Truck Rated Capacities

STANDARD EQUIPMENTFortis™ Package

Complete truck equipped with:• Mazda® 2.0L emissions compliant engine (S30-40FTS)• Electronic powershift transmission

- Electronic inching- Electronic shift control- Neutral start switch

• Anti-restart protection• MONOTROL® pedal • 2-Stage limited free-lift (LFL) VISTA® mast with maximum fork

height of 127.0" (3232 mm) • 36.0" (914 mm) wide hook-type carriage with 48.0”

(1219 mm) tall load backrest extension • 42.0" (1067 mm) long forks • 5 degrees forward and 5 degrees backward mast tilt • 3-function valve• Integrated dashboard display includes:

- LCD Display:-- Fuel level (Gasoline engine only)-- Hour meter-- Coolant temp-- Clock-- Messages

- Service Indicator Lights:-- Alternator-- Transmission oil temperature-- Engine oil pressure-- Brake fluid level-- Fasten seatbelt-- Low fuel level-- Engine malfunction-- System malfunction-- Park brake-- Water temp-- Forward, reverse and neutral direction indicators

• Hydrostatic power steering • Non-suspension vinyl seat • Electronic horn• Adjustable steer column • Rubber floor mat • High air intake• Integral tie downs • Operator restraint system • Serpentine core radiator• Single pedal inch brake• Hyster® Stability Mechanism (HSM)• Cowl-mounted hydraulic control levers• Swing out LPG tank bracket • 83” (2088 mm) Overhead guard• 12 months / 2,000 hours manufacturer’s warranty• 12 months / 4,000 hours manufacturer’s powertrain warranty• Operator’s manual• UL Classification LP or G

STANDARD EQUIPMENTFortis™ Advance Package

Complete truck equipped with:• Mazda® 2.0L emissions compliant engine• DuraMatch™ transmission

- Electronic inching- Electronic shift control- Neutral start switch- Auto Deceleration System (ADS)- Controlled power reversal- Controlled roll back on ramps

• Anti-restart protection• MONOTROL® pedal • 2-Stage limited free-lift (LFL) VISTA® mast with maximum fork

height of 127.0" (3232 mm) • 36.0" (914 mm) wide hook-type carriage with 48.0”

(1219 mm) tall load backrest extension • 42.0" (1067 mm) long forks • 5 degrees forward and 5 degrees backward mast tilt • 3-function valve• Integrated dashboard display includes:

- LCD Display:-- Fuel level (Gasoline engine only)-- Hour meter-- Coolant temp-- Clock-- Messages

- Service Indicator Lights:-- Alternator-- Transmission oil temperature-- Engine oil pressure-- Brake fluid level-- Fasten seatbelt-- Low fuel level-- Engine malfunction-- System malfunction-- Park brake-- Water temp-- Forward, reverse and neutral direction

• Hydrostatic power steering • Non-suspension vinyl seat • Electronic horn• Adjustable steer column • Rubber floor mat • High air intake• Integral tie downs • Operator restraint system • Serpentine core radiator• Single pedal inch brake• Hyster® Stability Mechanism (HSM)• Cowl-mounted hydraulic control levers• Swing out LPG tank bracket • 83” (2088 mm) Overhead guard• 12 months / 2,000 hours manufacturer’s warranty• 24 months / 4,000 hours manufacturer’s powertrain warranty• Operator’s manual• UL Classification LP or G

OPTIONAL EQUIPMENT

• Powertrain protection system• Premium electronic monitoring• High air intake with precleaner• Accumulator• Keyless start (with auxiliary key switch)• TouchPoint™ hydraulics with fully adjustable armrest• TouchControl™ hydraulic control handle• Return to set tilt• Semi-suspension and full suspension seat - vinyl or cloth• Dual inch brake pedals• Operator password• Audible Reverse activated 82-102 dB(A) self-adjusting alarm**• Visible amber strobe light - continuous activated, overhead

guard mounted• Various light packages

- Two brake/back-up high intensity LED lights- Two front and one rear halogen work lights - Two front, one rear halogen work light and two

brake/tail/back-up high intensity LED lights- Drive lights and rear work lights with halogen bulbs

• Parts publications - printed or CD, serial number specific• UL Classification GS and LPS

** A variety of optional alarms are available. For details,contact your local authorized Hyster Dealer or request theForklift Pedestrian and Accidents brochure - a comprehen-sive study of accidents in the workplace, Part Number:LIFTPED/B 12/03.

Hyster S30-40FTS Standard Features and Options

8

Hyster S30-40FTS Standard Features and OptionsCAPACITY:Model S30FT: 3000 lbs. at 24.0” (1814 kg at 610 mm) load center.Model S35FT: 3500 lbs. at 24.0” (2268 kg at 610 mm) load center.Model S40FTS: 4000 lbs. at 24.0” (2721 kg at 610 mm) load center.

Rated capacities are for trucks equipped with:• 3-Stage full free-lift (FFL) VISTA® mast to 163.0" (4140 mm) maximum fork height• 36.0" (914 mm) Hook-type carriage with 42.0" (1067 mm) long forks • 48.0” Tall load backrest extension (LBE)• Standard tread

MASTS

Masts are available in 2-stage limited free-lift (LFL) and 2- or 3-stage full free-lift (FFL) VISTA® masts.

Masts feature flush-faced, nested-channel design and full-radius, angled load rollers provides increased capacityat height while affording shorter overall length.

CARRIAGECarriages are hook-type, ITA Class II mounting. Overall

width without load backrest extension (LBE) is 36.0” (914 mm);with LBE is 37.0” (940 mm). Minimum inside-to-inside forkspacing, center to center is 5.03” (128 mm). Maximum out-side-to-outside fork spacing, center to center is 32.6” (828 mm).

FORKSS30-40FTS series features: 1.6” x 3.9” x 36.0” to 60.0”(40 x 100 x 914 to 1 525 mm) long pallet forks.

Polished and tapered forks are also available.

ENGINES

The Mazda® 2.0L LPG/gasoline engine is an EPA emissionscompliant powerplant. Their configurations are specified asfollows:Mazda ®2.0L emissions compliant engines feature:• 4-cylinder overhead valve and overhead camshaft design• Cast iron block, aluminum cylinder head with hardened

exhaust valve seats• Electronically controlled LPG fuel system• Spin-on full flow oil filter• Single barrel carburetor• Electronic governor• Heavy-duty air cleaner wth high air intake• Engine Control Unit (ECU)• Three-way catalytic converter exhaust system• 2.0L engine

TRANSMISSION

• Standard Electronic Powershift: Single range powershift,electronic inching (requires no adjustment), electricshift control and neutral start switch

• DuraMatch™: All of the features of the standard electronic transmission plus Auto Deceleration System,controlled power reversal, controlled roll back on ramps

COOLING SYSTEM

• Multiple cooling system designs:- Serpentine core- Square-wave anti-clog

• All radiators utilize cross-flow aluminum cores, pushertype fans and permanently lubricated water pump

• “Knife-edge” type fan shrouds that direct air flow through the counterweight air passages

• 15 psi operating system pressure

ELECTRICAL SYSTEM

• CANbus electrical system simplifies truck wiring and enhances truck dependability

• Ingress Protection Rating IP 66 sealed automotive style electrical connectors

• Standardized wire routing, all wires are color coded, and marked with numbers for easy identification

• Anti-restart protection• Vehicle System Manager (VSM) controls electrical functions,

and provides onboard diagnostics, monitoring and feedback

HYDRAULIC SYSTEM

Manual Hydraulic Control Valve & Electro-Hydraulic Control Valve• Tilt and auxiliary systems have 2,250 psi (15.5 MPa) relief

pressure in all valve variations• Hydraulic system is protected by a replaceable 3-micron

paper element in-tank filter assembly• Hydraulic breather filter includes an anti-splash baffle and is

rated at ten micron absolute• O-Ring face seal fittings with captive O-Ring grooves are used

on all high pressure connections• Emergency lowering valve allows load to be lowered in the

event of battery power loss (Electro-Hydraulic controls only)• 100 Mesh suction line strainer

STEER AXLE / STEER SYSTEM

• Equal-area, double-ended, hydrostatic steering cylinder is mounted in cast ductile iron axle frame

• Elastomeric axle mounts absorb shock and allowlubrication free articulation

• Axle assembly utilizes synthetic boots and seals to retain lubricants and shield components against destructive grit and reduce lube points

• Wheel hubs rotate on large, tapered roller bearings• Top spindle bearings lubricated through easy access

lube fittings• Hydrostatic steer system provides smooth, precise

steering with only 4 turns lock-to-lock• Hyster® Stability Mechanism (HSM) enhances lateral stability

by limiting steer axle articulation without a compromise inuneven surface travel

BRAKES

• Asbestos free, self-energizing, automatically adjustingdrum brake assemblies

• Single circuit master cylinder with sealed fluid reservoir and magnetic fluid level sensor

• Ratchet-type, hand-activated parking brake lever allowscontrolled application

OPERATOR COMPARTMENT

• Cowl mounted hydraulic hand levers• TouchPoint™ electro-hydraulic seat side mini-levers

(optional)• TouchControl™ hydraulic seat side joystick (optional)• 12-Inch textured steering wheel with spinner knob• Automotive style foot controls with single braking/inching

pedal (dual pedals are optional)• Integrated dashboard display is backlit, allowing easy

visibility under all lighting conditions• Grid-style overhead guard offers superb visibility at

extended heights• Infinitely adjustable tilt steer column• MONOTROL® pedal controls engine speed and truck

direction, freeing operator’s hands to operate steeringand hydraulic levers

Special attachments, equipment or accessories not listed above may be available through ApplicationsEngineering for specific application requirements.

9

Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006

Part No.: S30-40FTS/TG1/2006 Litho in U.S.A.

Visit us online at www.hysterusa.com or call us at 1-800-HYSTER-1.

Hyster, , MONOTROL and VISTA are registered trademarks of Hyster Company.Fortis, Fortis Advance, DuraMatch, DuraTread, Pacesetter VSM, Performance Plus,TouchPoint and are trademarks of Hyster Company. Hyster products aresubject to change without notice.Mazda is a registered trademark of its respective company. The Hyster Company products included in this document may be covered by U.S. Patent 6,684,148 and other patents pending. ©2006 Hyster Company. All rights reserved.

hyster s30-40fts lift truck dimensions

Documents