hydraulic modernization - thyssen krupp elevator · pdf filewith our h-power modernization,...
TRANSCRIPT
More than 30 performance-optimizing features provide a total solution that consumes less energy and uses superior
materials. With our H-Power modernization, there is no need to replace your entire hydraulic elevator system.
PERFORMANCE. EFFICIENCY. RELIABILITY.
1 2
3 4
5 6Typically, the door operator causes the most trouble
calls. Ours has an on-board diagnostic service tool
resulting in consistent operation and fewer shutdowns
and service callbacks. A linear door operator is also
available on certain models.
DOOR OPERATOR
Our digital-controlled system has diagnostic
capabilities for easier troubleshooting.
NON-PROPRIETARY USER-INTERFACE TOOLS
Unrestricted access for on-board adjusting and
troubleshooting keeps trouble calls short.
BATTERY LOWERING UNIT This device prevents
entrapments and provides supplemental power
to the controller in case of an outage. It also
eliminates the need for a costly power generator.
SOLID STATE STARTER Energy-efficient motor
starter minimizes power surges and provides
smooth, quiet and reliable operation.
ELEVATOR POSITIONING ENCODER Teflon-
coated, perforated tape that runs the length of the
hoistway, digitally communicates the elevator’s
location. This provides a safe and level landing for
passengers when boarding and exiting.
TAC CONTROLLER1 2
3 4
5 6
Our stainless steel fixture line includes car operating
panels, hall fixtures and car riding lanterns that improve
elevator appearance and functionality. Fixtures are also
easy to install, do not damage the walls and are in full
compliance with U.S. and Canadian fire service codes.
FUSION FIXTURES
1 2
3 4
5 6
This key component reduces noise and vibration during
operation—allowing for a quiet and smooth ride. The
compact design uses less materials to construct and
takes up less space. Furthermore, precise operation
of the unit increases leveling accuracy and improves
passenger safety.
POWER UNIT (OPTIONAL)1 2
3 4
5 6
Our cable and hoistway wiring system utilizes
advanced CAN-BUS technology, which communicates
with multiple devices through one wire. This provides
safer, more efficient operations and maintenance. It
also speeds installation and troubleshooting, as well as
uses less wiring materials and other resources.
WIRING PACKAGE
1 2
3 4
5 6
Ask your ThyssenKrupp Elevator representative about
our Advantage Packages that make the H-Power
modernization process as quick and convenient as
possible for you and your tenants.
Front and Rear Openings
Up to 8 Stops
Power Supply: 200-208V, 220-240V,
460-480V, 575-600V, 50/60 HZ AC,
60 HP Max
Speeds: Up to 200 fpm
Capacity: 1200 to 5000 lbs. Cars in
group can have different capacities
Travel: Up to 60'-0"
All illustrations and specifications are based on information in effect at time of publication approval. ThyssenKrupp Elevator reserves the right to change
specifications or design and to discontinue items without prior notice or obligation. Copyright © 2015 ThyssenKrupp Elevator Corporation. CA License #651371
ThyssenKrupp Elevator Americas • 2600 Network Blvd., Ste. 450, Frisco, TX 75034 • Phone (877) 230-0303 • thyssenkruppelevator.com
version 04.15
TAC CONTROLLER
– Digital controls
– Simplex or group operations
– On-board diagnostics
– Solid state starter
– Battery lowering
– Tenant security
– Local code compliance
– Limit switches (if required by local code)
– Leveling accuracy: +/- ½ inch (13 mm)
POWER UNIT (optional)
– Submersible design
– Exclusive TKE i-2® control valve
– Motor from 5 to 60 HP
– Oil flow silencer
DOOR OPERATOR
– Closed-loop encoder feedback
– On-board diagnostics
– MicroLight electronic door detector
TAPE SELECTOR
– Elevator position digitally communicated
to TAC controller
FIXTURES
– Car operating panel
– Digital position indicator
– ADA-compliant hands-free phone
– Emergency light
– Braille
– Code-compliant signage
– Surface-mounted hall fixtures with
fire service
– Surface-mounted main floor digital
position indicator (optional)
– Car riding lantern
– Hoistway access fixtures
WIRING PACKAGE
– Traveling cable
– Hoistway wiring
SAFETY
– Car top railing where applicable
– Car top exit switches
H-POWER PERFORMANCE PACKAGE FEATURES: