husky 1050 air-operated diaphragm pump 2020-04-01آ  repair/parts huskyآ® 1050 air-operated...

Repair/Parts

Husky® 1050 Air-Operated Diaphragm Pump 313435ZAJEN

1-inch pump with modular air valve for fluid transfer applications. For professional use only.

See page 4 for model information, including approvals. 125 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure 125 psi (0.86 MPa, 8.6 bar) Maximum Air Input Pressure

Center Flange

ti13844a

ti13843a

End Flange

1050P Polypropylene 1050C Conductive

Polypropylene 1050F PVDF

Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

1050S Stainless Steel 1050H Hastelloy

ti14342a

1050A Aluminum

ti13946a

Related Manuals

2 313435ZAJ

Contents Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 To Find Your Nearest Distributor . . . . . . . . . . . . . . 3 To Specify the Configuration of a New Pump . . . . 3 To Order Replacement Parts . . . . . . . . . . . . . . . . . 3 Distributor Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pump Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ATEX Certifications . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Pressure Relief Procedure . . . . . . . . . . . . . . . . . 8 Repair or Replace Air Valve . . . . . . . . . . . . . . . . 8 DataTrak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Check Valve Repair . . . . . . . . . . . . . . . . . . . . . 12 Diaphragms and Center Section . . . . . . . . . . . . 13 Torque Instructions . . . . . . . . . . . . . . . . . . . . . . 16

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Parts/Kits Quick Reference . . . . . . . . . . . . . . . . 18 Center Section . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Air Valve and Data Monitoring . . . . . . . . . . . . . . 21 Fluid Covers and Manifolds . . . . . . . . . . . . . . . . 23 Seats and Check Ball . . . . . . . . . . . . . . . . . . . . 25 Diaphragms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Seat, Check Ball, and Diaphragm Kits . . . . . . . 28 Manifold O-Rings . . . . . . . . . . . . . . . . . . . . . . . . 29 DataTrak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Graco Standard Husky Pump Warranty . . . . . . . . 34 Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . 34

Related Manuals

Manual Description

312877 Husky 1050 Air-Operated Diaphragm Pump, Operation

313597 Husky 1050A UL-Listed Diaphragm Pump, Operation

313598 Husky 1050A CSA-Compliant Diaphragm Pumps, Operation

313840 DataTrak, Instructions/Parts

406824 Pulse Count Kits, Instructions

406825 Reed Switch with Solenoid Kits, Instructions

406826 Torque Instructions (Manifolds and Fluid Covers)

To Find Your Nearest Distributor

313435ZAJ 3

To Find Your Nearest Distributor

1. Visit www.graco.com.

2. Click on Where to Buy and use the Distributor Locator.

To Specify the Configuration of a New Pump Please call your distributor.

OR

Use the Online Diaphragm Pump Selector Tool at www.graco.com.

To Order Replacement Parts Please call your distributor.

Distributor Note 1. To find part numbers for new pumps or kits, use the Online Diaphragm Pump Selector Tool.

2. To find part numbers for replacement parts:

a. Use the configuration number from the ID plate on the pump. If you only have the Graco 6-digit part num- ber, use the selector tool to find the corresponding configuration number.

b. Use the Configuration Number Matrix on the next page to understand which parts are described by each digit.

c. Refer to the main Parts illustration and to the Parts/Kits Quick Reference. Follow the page references on these two pages for further ordering information, as needed.

3. Please call Graco Customer Service to order.

http://www.graco.com http://wwwd.graco.com/training/husky/index.html

Pump Matrix

4 313435ZAJ

Pump Matrix Check the identification plate (ID) for the Configuration Number of your pump. Use the following matrix to define the components of your pump.

Sample Configuration Number: 1050A-PA01AA1SSBNBNPT

1050 A P A01A A1 SS BN BN PT Pump Size

Wetted Section Material

Drive Identifier

Center Section and Air Valve

Fluid Covers and Manifolds

Seats Balls Diaphragms Manifold O-Rings

Pump Size

Wetted Section Material

Drive Identifier

Center Section and Air Valve Material

Air Valve/Monitoring

Fluid Covers and Manifolds

1050 A Aluminum P Pneumatic

Aluminum

A01A Standard A1 Aluminum, standard ports, inch 1050 C Conductive

Polypropylene A01B Pulse Count  A2 Aluminum, standard ports, metric A01C DataTrak  C1 Conductive polypropylene,

center flange1050 F PVDF A01D Remote 1050 H‡ Hastelloy A01E Optional FKM Seals C2 Conductive polypropylene, end

flange1050 P Polypropylene AC1A CSA-Compliant 1050 S‡ Stainless Steel AU1A UL-Listed; Fuel

transfer F1 PVDF, center flange

AU3A UL-Listed; Fuel dispense

F2 PVDF, end flange

Conductive Polypropylene

C01A Standard H1 Hastelloy, standard ports, inch C01B Pulse Count  H2 Hastelloy, standard ports, metric C01C DataTrak  P1 Polypropylene, center flange C01D Remote P2 Polypropylene, end flange

Polypropylene

P01A Standard S1 Stainless steel, standard ports, inchP01B Pulse Count

P01C DataTrak S2 Stainless steel, standard ports, metricP01D Remote

S5-1 Stainless steel, center flange, horizontal outlet port

, ‡, , or : See ATEX Certifications, page 5.

Contains pressure relief valve.

S5-2 Stainless steel, center flange, vertical outlet port

CONFIGURATION NO.PART NO. SERIAL NO.

SERIESDATE CODE MAX WPR PSI-bar MADE IN

ID

ti14103a

Check Valve Seats Check Valve Balls Diaphragm Manifold O-Rings

AC Acetal AC Acetal BN Buna-N — Models with Buna-N, FKM Fluoroelasto- mer or TPE seats do not use o-rings.

AL Aluminum BN Buna-N CO Polychloroprene Overmolded

BN Buna-N CR Polychloroprene Standard FK FKM Fluoroelastomer

FK FKM Fluoroelastomer CW Polychloroprene Weighted GE Geolast

GE Geolast® FK FKM Fluoroelastomer PO PTFE/EPDM Overmolded

PP Polypropylene GE Geolast PS PTFE/Santoprene Two-Piece PT PTFE

PV PVDF PT PTFE PT PTFE/EPDM Two-Piece

SP Santoprene® SP Santoprene SP Santoprene

SS 316 Stainless Steel SS 316 Stainless Steel TP TPE

TP TPE TP TPE

ATEX Certifications

313435ZAJ 5

ATEX Certifications

Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When these symbols appear in the body of this manual, refer back to these Warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

 All 1050A (Aluminum) and 1050C (Conductive Polypropylene) pumps are certified:

‡ 1050S (Stainless Steel) and 1050H (Hastelloy) pumps with aluminum or conductive polypropylene centers are certified:

 1050A (Aluminum) and 1050C (Conductive Polypropylene) pumps with DataTrak or Pulse Count AND 1050S (Stainless Steel) and 1050H (Hastelloy) pumps with aluminum or conductive polypropylene centers and fitted with DataTrak or Pulse Count are certified:

II 2 GD II 2 GD II 2(1) G Ex h IIC 66°C...135°C Gb Ex h IIIC T135°C Db

Ex h IIC 66°C...135°C Gb Ex h IIIC T135°C Db

Ex h [ia Ga] IIA T3 Gb X

ATEX T-code rating is dependent on the temperature of the fluid being pumped. Fluid temperature is limited by the materials of the pump interior wetted parts. See Technical Data for the maximum fluid operating temperature for your specific pump model.

 DataTrak and Pulse Count are certified:

II 1 G 9902471

Class I, Div. 1, Group D T3A

Ex ia IIA T3 Ga ITS13ATEX27862X

2575

WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: • Use equipment only in well ventilated area. • Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop

cloths (potential static arc). • Keep work area free of debris, including solvent, rags and gasoline. • Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes

are present. • Ground all equipment in the work area. See Grounding instructions. • Use only grounded hoses. • Hold gun firmly to side of grounded pail when triggering into pail. • If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment

until you identify and correct the problem. •