FriendsWelcome!

How to hack windows administrator password using command prompt

• Installing a new operating system.• Logging in with other accounts.• Using a USB-Flash method.

Common things that everyone:

• A Bootable Windows 8 DVD or Bootable USB Flash Drive

• A PC or Laptop with Windows 8/8.1 Installed in it.

• A Little Brain

Things to be required

• This Method works only for winnows 8 and8.1.• This is only for educational purpose.

Things to remember :

Alert • Due to miss-type of commands.• Skipping of any step’s in the process.

• Insert Bootable Windows 8 DVD or Bootable USB Flash Drive and Restart your PC.

• If you Insert a DVD it will ask to press Any Key to Boot From DVD. So press any Key.

Procedure:

• Wait until it loads and ask for Language settings. Keep Values as Shown below

• A. United Kingdom• B. United States• C. US- International• Then Click on Next• In next Window Click on Repair Your Computer Instead Of Install

Now

• In Next Windows Click On Troubleshoot• In Troubleshoot Window Click on Advanced Options

• In Advanced Options Click on Command Prompt

• After opening of Command Prompt Enter Following Command and Press Enter• DISKPART• list vol

• In Advanced Options Click on Command Prompt

• CMD shows you List of Partitions You have on Your PC. Then Enter Following Command and Press Enter exit

• Next enter the following Commands one by one and press enter after each command. ( Make Sure to Replace C in the First Command With Appropriate Drive Letter in Which Your Windows 8/8.1 is Installed ).

• C:• cd windows• cd system32• copy cmd.exe cmd.exe.original• copy Utilman.exe Utilman.exe.original• ren cmd.exe Utilman.exe• shutdown -r -t 00

• I you did Every thing well your System Will Restart and while restarting your PC don't Press any key to boot from CD

• Click on option that Squared in Picture.• It will Open Command Prompt For you Instead of Ease of Access

• In CMD enter following Command and press enter. ( Don't forget to replace trinath With your Admin Name. )

• net user trinath *

• CMD will ask you to Enter new Password ( Press Enter after typing Passsword ). Be caution Nothing is shown while you are typing Password in CMD. So Remember while you are entering.

• Next CMD will Ask you to retype your Password for confirmation ( Press Enter after typing Password ). So Retype it.

• Now Close CMD and Restart and Repeat all Steps previous steps until you open the command prompt from the in the advance options.

• After CMD Opens Enter Following Commands and press enter after each command

• C:• cd windows• cd system32• del Utilman.exe• ren Utilman.exe.original Utilman.exe• ren cmd.exe.original cmd.exe• shutdown -r -t 00

• After shutdown You Can Remove your DVD or USB drive and Start your PC normally and log in With new Password Enjoy

• If you Like this Article Please Share with your friends Using Social media Buttons ,subscribe to my channel and get accessed for more videos ,if you have any quires send it comment section .

Finally:

• Discuss the topics covered.• Reiterate your welcome.• Remind the participants to submit paperwork.• Wrap up the orientation session.

Summary