how to recover data via terminal mode of hd doctor for seagate
TRANSCRIPT
How to Data Recovery via Terminal Mode of HD Doctor for Seagate
Presently, many ST hd repair cases come to our lab, here we made a case study to show how to
recover data via Terminal Mode of HD Doctor for Seagate. we all know that The difference
between Seagate HDD and other Brand hard drives is that all diagnosis are done via terminal
mode (CMD Mode). Seagate HDD can works in ATA interface and COM interface. Once the HDD
works in COM interface, it will output message to the log telling working status after power reset.
Therefore, we can decide what to do next according to the info in terminal mode.
Picture 1 terminal mode
the above picture is the terminal log of a SATA HDD, which works normally. We can know that
drive family is PUMA2; ROM version is 0.03; and firmware version is 3.03. "Buzz – Head Mask
FFFF –Switch to full int." means the head is good and working well. "Spin Ready" means motor
works well and reaches the required speed. "SATA Reset" tells that drive is ready.
However, if HDD fails to boot or works unmorally, it will output error message to the log, e.g.,
"Stuff was unreadable", "OVERLAY FAILED" etc. "Stuff was unreadable" means stuff is corrupted,
while “OVERLAY FAILED” means ATA is corrupted. We need to overwrite the original firmware
with a donor firmware to repair such problems of the hdd.
Picture 2 Stuff corruption
Picture 3 ATA corruption
sometimes, we need only to overwrite donor firmware and sometimes we need to use diagnostic
commands to analysis further. When you input a command in the terminal model interface, the
HDD will respond accordingly to it. For example, if you press keyboard [Ctrl] + [Z], the HDD will
return a prompt "T >" (for Barracuda 7200.11, it's "F3 T>").
We are engineers form IRS international data recovery service, and We will introduce more usage
of different command orders. Meanwhile we have all the reliable HDD repair and data recovery
tools from SalvationDATA Technology and ACE lab. If you have any failed HDD and have essential
data to be retrieved back, you can contact us, by following methods:
Tel: +39(0)434 627 897
Fax: +39(0)434 606 409