Hilti engineering for

earthquake applications

Building a future safer from earthquakes.in compliance with NZS4219 (Seismic Performance of Engineering Systems in Buildings) and NZS3101 (Concrete Standards)

Hilti. Outperform. Outlast.

Hilti engineering for

earthquake applications

ACI 355.2 and New European seismic regulations provide guidance for the qualification and design of post-installed anchoring

Under seismic loading, the performance of a

connection in a structure is crucial either to

its stability or in order to avoid casualties and

major economic impacts, due to the collapse

of non-structural elements.

In the United States the anchor seismic

resistance shall be evaluated in accordance

with ACI 318 Appendix D. Created in

accordance with the ACI 355.2 regulated

testing procedures and acceptance criteria

ICC-ES AC193 and AC308, pre-qualification

reports provide sound data in a proper

design format.

With the release of the ETAG 001 Annex E

in the first half of 2013, the seismic pre-

qualification of anchors became regulated

in Europe. Anchors submitted to these new

test procedures will now also incorporate in

the ETA (European Technical Approval) all the

required technical data for seismic design.

Until the release of the EN 1992-4, planned

for 2015, EOTA TR045 (Technical Report) will

set the standard for the seismic design of

steel to concrete connections. Therefore, the

design framework for the seismic design of

anchors is already available through both the

U.S. and European regulations. The National

Standard NZS 3101 and 4219 are currently

related to ACI 318 Appendix D and they

stipulate only anchors that have passed ACI

355.2 can be used for seismic applications.

Seismic Applicationsfor building construction

BC

Concrete Fastenings Hilti solutions

HIT-HY 200

• Fast-curing bonded anchor• SAFEset with the innovative HIT-Z rod

(no-cleaning)• HIT-Z Seismic ETA C2 approved• HSL, HDA & RE in compliance

with ACI 355.2

HY 200 with HIT-Z Rod

HSL

HDA

HST stud anchor, HUS screw anchor • Designed to excel in cracked concrete• HST Seismic ETA C2 approved• HUS anchor in compliance

with ACI 355.2

Fire Rated Walls/Floors/Joints Hilti solutions

Firestop foam, sleeve & blocks

High flexibility to cover movement of penetrants

Minimum damage, smoke-tight and tested fire integrity

Firestop acrylic & silicone sealant• Compensate shear movement due to

inter-story drift• Very good adhesion to substrate

material

Post-installed Rebars Hilti solutions

HIT-HY 200, HIT-RE 500-SD• Slow and fast curing for long and short

embedments• Approved for seismic rebar

Hollow drill bit• SAFEset installation system for safe

rebar installation

Detection systems (PS)

• Avoid bar hits when drilling• Identify existing bars for splices and

strengthening

M&ESeismic Applicationsfor mechanical & electrical

Hilti engineering for

earthquake applications

Electrical/Telecom Hilti solutions

Cable & conduit fasteners

• Most time and cost-efficient US code compliant method, e.g. up to 1.5’’ conduits

Firestop foam, sleeve & blocks

• High flexibility to cover movement of penetrants

• Minimum damage, smoke-tight and tested fire integrity

Utilities Fixing Hilti solutions

Anchoring to concrete

• Chemical and mechanical anchoring solutions

• Approved as per the new European seismic regulation

• In compliance with ACI 355.2

Fastenings to steel• Time and cost-efficient

fastening method • US code compliant for light

non-structural fastenings to steel base materials

Piping/Ventilation Hilti solutions

HST stud anchor, HUS screw anchor

• HST Seismic ETA C2 approved • HUS anchor in compliance with

ACI 355.2 • Easy installation

Retrofit & Cast-in Firestop Collar

• High flexibility to cover movement of penetrants

• Tested fire integrity and smoke tightness

Hilti engineering for

earthquake applications

S&MSeismic Applicationsfor steel & metalStructural Steel Hilti solutions

HIT-HY 200 with HIT-Z rod • SAFEset with the innovative HIT-Z rod (no-cleaning)

• HIT-Z Seismic ETA C2 approved• HSL in compliance with ACI 355.2

HST stud anchor, HUS screw anchor • Designed to excel in cracked concrete• Seismic approved solutions

(HST: ETA C2, HUS: ETA C1)• HSL in compliance with ACI 355.2

Powder actuated fasteners• US code compliant for light

non-structural fastenings to steel base materials

Ventilated Façade/Curtain Wall Hilti solutions

Eurofox façade system• Aluminum sub-construction for light

ventilated façade• Seismic tested as per CSTB

HST stud anchor • Approved as per the new European seismic regulation (ETA C2)

• In compliance with ACI 355.2

Firestop joint spray

• Compensate shear movement due to inter-story drift

• High regular movement capability

Decking Hilti solutions

X-ENP, EDN, EDNK screws

• Productive and US code compliant• Contribute to ductile deck behaviour in

seismic events• Comprehensive tool portfolio, including

standup tools

IFSeismic Applicationsfor interior finishing

Hilti. Outperform. Outlast.Hilti (New Zealand) Limited | Unit 1/B 525 Great South Road, Penrose | P 0800 444 584 | F 0800 329 445 | www.hilti.com

Hilti engineering for

earthquake applications

Suspended Ceilings Hilti solutions

HST studs, HUS screws• For bracing• Seismic approved solutions

(HST: ETA C2, HUS: ETA C1)• In compliance with ACI 355.2

PM 4-M multi-line laser

• Alignment in the horizontal, vertical and inclined planes

• Quick, easy and accurate

Interior Finishing Solutions Hilti solutions

Track fastenings • Productive and US code compliant

fastening for non-load bearing partition wall framing

Drywall screws

• Collated screws in perfect match to magazine SMD 57

• Fast working progress

Firestop sleeve & acrylic sealant • Seismic tested penetrations and joint

systems• Minimum damage, smoke-tight and tested

fire integrity