grundfos lifting stations
TRANSCRIPT
-
8/17/2019 Grundfos Lifting Stations
1/28
Lifting Stations
GRUNDFOS WASTEWATER
-
8/17/2019 Grundfos Lifting Stations
2/28The Range >2
Grundfos Lifting Stations
Unique customer benefitsThe Grundfos lifting stations form part of acomplete range of wastewater removal and
sewage handling products. Like all Grundfosproducts the lifting stations offer unique
customer benefits, making them the naturalchoice for any application.
> CompactThe Grundfos lifting stations are of a verycompact design, easy to fit even where
space is limited.
> DurableMade of durable, non-corroding materials
the Grundfos lifting stations are robust and
virtually maintenance-free. All outsidesurfaces are smooth and easy to clean.
> VersatileThe Grundfos range comprises a modelfor every purpose. They are easy to install
with easily accessible pipe connections.
> Handling of large volumesThe Grundfos lifting stations cover a widecapacity range – from the one-source
Sololift to the powerful Multilift series,designed for handling large volumes of
wastewater and sewage.
Grundfos offers a range of highly efficient, low-
maintenance wastewater lifting stations for a
multiple of applications. The lifting stations in-
corporate state-of-the-art technology and straight-
forward thinking to provide simple solutions to
complex problems.
All models have been designed to reduce operating
and installation costs and optimise operating effici-
ency. The Grundfos range of lifting stations com-
prises a variety of models from small, one-source
units to dual pump systems with volume capacities
of up to 1200 litres.
Reduced costsand optimised efficiency
-
8/17/2019 Grundfos Lifting Stations
3/28The Range >3
The Range
Sololift 3-0
Liftaway B 40-1
Multilift M
Multilift APLD
Multilift MD
Liftaway C 40-1
Sololift 4-2
(Photographs not to scale.)
-
8/17/2019 Grundfos Lifting Stations
4/28
Grundfos Sololift
The Grundfos Sololift 3-0 and 4-2 are sewage
removal units designed for efficient removal
of sewage and wastewater in one-family
houses or other places with a limited dis-
charge requirement. The Sololift is available
in two sizes: the Sololift 3-0 for single-toilet
installation, and the Sololift 4-2 capable of
servicing an entire bathroom with toilet,
washbasin, shower, bidet, etc.
Sololift 4-2
Sololifts >4
Sololift 3-0
-
8/17/2019 Grundfos Lifting Stations
5/285
Easy to installThe Grundfos Sololift are cost-saving solutions, easyto install – the ideal alternative to extensive and
costly plumbing work. Both models are suppliedready for installation complete with all the necessary
fittings for toilet, washbasin drains and outlets forshower and bidet.
Safe to useThe Sololift are constructed in accordance withDIN/EN 12050 part 3, they are maintenance-freeand easy to clean. The units incorporate a built-in
pump with an efficient cutter system. A non-returnvalve ensures that no liquid returns from the sewer
line, and a special ventilation outlet with an activecarbon filter prevents odours from escaping into
the bathroom. The motor has a built-in thermalprotection.
Sololifts >
Customer benefits
> Robust and efficient
> Elegant, compact design
> Maintenance-free and easy to clean
> Direct toilet connection
> Gas and odour-proof
> Guaranteed reliability
Sololift 3-0The Sololift 3-0 is designed for efficient removal of
sewage from single toilets situated above or belowsewer level. The unit is connected direct to the toilet.
Installed below sewer level, for example in a base-ment, the Sololift lifts the toilet discharge up to the
sewer line.
Sololift 4-2The Sololift 4-2 is designed for collecting and pump-
ing of the entire volume of wastewater and sewagefrom a toilet, washbasin, shower and bidet. TheSololift is useful where the existing pipe installa-
tions do not permit the discharges to flow to thesewer line by itself.
1 Toilet strainer
2 Efficient stainless cutter system
3 Integrated, pneumatically operated level switch
4 Integrated non-return valve
5 Carbon filter to prevent odours
6 Easy-to-clean surface
-
8/17/2019 Grundfos Lifting Stations
6/28Sololifts Technical Data >6
Technical dataVoltage: 1 x 230 VFrequency: 50 Hz
Enclosure class: IP 44Insulation class: F
Sound pressure level:
-
8/17/2019 Grundfos Lifting Stations
7/28Sololifts Dimensions >7
Dimensions
Sololift 3-0
Sololift 4-2
ApprovalsZ – 53.2 – 306VA 2.71/9609
-
8/17/2019 Grundfos Lifting Stations
8/28Liftaways >8
Grundfos Liftaway
For kitchens, bathrooms or utility rooms
located below sewer level the flexible
Grundfos Liftaway (collection tank in com-
bination with a Grundfos AP or KP pump)
provide efficient removal of domestic waste-
water without the need for major structural
modifications. The Grundfos range comprises
two models, Liftaway B 40-1 and Liftaway C
40-1. The Grundfos Liftaways are constructed
in accordance with EN 12050 part 2.
Liftaway C 40-1
Liftaway B 40-1
-
8/17/2019 Grundfos Lifting Stations
9/28Liftaways >9
Liftaway C 40-1The Liftaway C 40-1 model is designed for mount-ing on the floor or on a wall. Fitted with different
types of pumps, it provides a flexible solution forpumping of wastewater from e.g. washing machines,
dishwashers, washbasins or tubs.
In spite of the compact design, the Liftaway C 40-1has a large and efficient lifting volume. Ideally com-
bined with a Grundfos KP pump, the ready-to-installunit is supplied complete with an installation pack-
age comprising pipes and fittings and a rubber-coated
non-return valve of stainless steel. (The pump mustbe bought separately.) Liftaway C 40-1 is equipped
with an overflow protection device and an activecarbon filter to eliminate odours.
The discharge pipe can be connected either to the
right or left-hand side of the tank.
Liftaway C 40-1 can be set to two different start levels:
• Normal operation, approx. 260 mm.• Low-level operation, approx. 135 mm
(discharge from showers).
Customer benefits
> Flexible, discreet installation
> Odour-proof
> Rubber-coated, stainless steelnon-return valve
Liftaway B 40-1Designed for installation below floor level, the Lift-
away B 40-1 provides a simple solution for existingbuildings where wastewater has to be pumped to
the sewer system.
The Liftaway B 40-1 is ideal for pumping wastewaterfrom washbasins, washing machines, sanitary rooms,
showers, floor drains, etc. It can also be used as adrainage pit for pumping drainage and surface water.
The Liftaway B 40-1 can be used in combination with
a stainless steel Grundfos KP or AP 12 pump with floatswitch for automatic start/stop. (The pump must
be bought separately.)
The unit is supplied with all necessary pipes and fit-
tings, including a rubber-coated stainless steel non-return valve. Liftaway B 40-1 features a telescopic
part for easy height adjustment. The unit is easy toinstall. It is turnable for individual positioning and
connection via three DN 100 inlets, placed at inter-vals of 90 degrees, and one DN 70 connection for
air release.
Water sealto eliminate odours
Grundfos KP or AP
pump withlevel switch
Turnable top coverwith strainer
Telescopic partfor height adjustment(additional telescopicpart is available)
Carbon filterto eliminateodours
Grundfos KPPump withfloat switch
Inlet ordischarge
InletInlet ordischarge
Overflowpreventter
Inlet
Liftaway B 40-1 features a telescopic part for easy height adjustment.
-
8/17/2019 Grundfos Lifting Stations
10/28Liftaways Technical Data >10
Grundfos Liftaways
Electrical data, pump designation and product numbers
Pumped liquids (both models)Wastewater, not containing solid particles or fibres.Liquid temperature for KP pumps: Max. 50°C.
Liquid temperature for AP pumps: Max. 55°C.For short periods of max. 2 minutes up to 70°C at
minimum 30 minutes intervals.
The tank is resistant to weak acids with pH valuesof 4 to 10.
Wastewater containing fat must not be discharged
into the tank.
Technical dataDischarge connection:
Liftaway B R 1 1/4”
Liftaway C DN 40Inlet connections:
Liftaway B 3 x DN 100Liftaway C 3 x DN 40, 1 x DN 40/50
Connection for venting and/or cable entry:Liftaway B 1 x DN 70
Liftaway C Cable entry as a rubber sealingNo need for a venting pipe
Sound pressure level:
-
8/17/2019 Grundfos Lifting Stations
11/28Liftaways Dimensions and Performance >11
Performance
Pump types and performance curves for
Liftaway B 40-1 and C 40-1.
0 2 4 6 8 10 12 14 16
0
2
4
6
8
10
12
14
H[m]
0 1 2 3 4
AP 12.40.08
AP 12.40.06
AP 12.40.04
KP 350
KP 250
KP 150
Q [m3/h]
Q [l/s]
Liftaway B 40-1 + KP/APISO 9906 Annex A
Dimensions
Liftaway B 40-1
Liftaway C 40-1
(Additionaltelescopic part)
0 2 4 6 8 10 12 Q [m3/h]
0
1
2
3
4
5
6
7
8
9
H[m]
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q [l/s]
KP 350
KP 250
KP 150
Liftaway C 40-1 + KPISO 9906 Annex A
-
8/17/2019 Grundfos Lifting Stations
12/28Multilift Stations >12
Grundfos Multilifts M and MD
Grundfos Multilift M and MD are designed
for the removal of larger volumes of waste-
water and sewage – for instance in blocks
of flats, small hotels, restaurants or other
building complexes. The Multilift stations
are designed specially for the collection and
pumping of wastewater and raw sewage
from wastewater pipes and water closets
situated below the sewer level. The Multilift
stations lift the wastewater and sewage
and carry it forward to the sewer line.
Multilift M
Multilift MD
-
8/17/2019 Grundfos Lifting Stations
13/28Multilift Stations >13
Customer benefits
> Complete units ready for installation
> Gas and odour-proof
> Corrosion resistant
> Low-noise operation
> Shock and break-proof polyethylene tank
Multilift MEquipped with one pump and with a tank capacityof 100 litres, Multilift M is ideally dimensioned for
one-family homes or smaller commercial buildings.The Multilift M is available in seven different models
with output power ranging from 1.2 to 3.2 kW.
Multilift MDWith two pumps and a tank capacity of 120 litres,
the Multilift MD is ideal for multi-family homes orcommercial building projects where the additional
capacity and the operational security offered by atwo-pump system is advantageous. Multilift MD isavailable in five different models with output power
ranging from 1.5 to 3.2 kW.
Pumped liquidsThe Multilift M and MD stations are suitable for
handling wastewater and other liquids containingsolids, such as fibres, textiles, and faeces, with a
pH value of 4 to 10.
The Multilift M and MD are capable of handlingliquid temperatures between 0 and +40°C, for short
periods of time up to +60°C.
Tank volume
Ready to installThe Grundfos Multilift M and MD stations are sup-plied as complete units ready for installation. The
units consist of one or two vortex impeller pumpsfully integrated with the collecting tank. Solutions
for single or three-phase power supply are available.
The Multilift M and MD stations are supplied com-plete with all necessary flexible connections for inlet,
discharge and ventilation pipes. The Multilift M andMD have polypropylene level sensor unit with built-in
pressure switches.
An LC 109 controller for Multilift M and an LCD 109
controller for Multilift MD are supplied with the units.
Multilift M and MD are fitted with a DN 80 mmvertical discharge port with a non-return flap valve.
The Multilift MD model is fitted with two non-returnflap valves and a breeches pipe. The collecting tank
is made of non-breakable, non-corrosive, airtightpolyethylene. It is completely watertight as well as
gas and odour-proof.
1 Motor/pump
2 Non-return valve
3 Level sensor
4 Collecting tank
M MD
Inlet level [mm] 180 250 180 250
Tank capacity [l] 100 100 120 120
Effective volume [l] 54 74 72 92
1 2
3
4
-
8/17/2019 Grundfos Lifting Stations
14/28Multilift Stations Technical Data >14
MultiliftInlet level
PowerNumber
Voltage Weight Product[mm]
outputof
[V] [kg] numberP2 polesSchuko CEE
[kW] plug plug
Electrical data, type designation and product numbers
Plug type
M.12.1.4 1.2 4 • 1 x 230 39.0 960754363 x 230 37.5 96075442
3 x 400 36.6 96075441
M.15.1.4 1.5 4 • 1 x 230 41.5 960754433 x 230 39.5 96075445
3 x 400 38.5 96075444
3 x 230 41.5 96075447
3 x 400 41.5 96075438
3 x 230 41.5 96075449
3 x 400 41.5 96075457
3 x 230 41.5 96477864
3 x 400 41.5 96477865
MD.15.1.4 1.5 4 • 1 x 230 80.5 960754503 x 230 76.0 96075452
3 x 400 76.0 96075437
3 x 230 80.0 96075454
3 x 400 80.0 96075439
3 x 230 79.5 96075456
3 x 400 79.5 96075455
3 x 230 79.5 96477867
3 x 400 79.5 96477866
Grundfos Multilift Stations M and MD
Motor/pump and non-return valve withhose connection
Optional vertical or horizontal inlet connections
180and250
M.12.3.4 1.2 4 •
M.15.3.4 1.5 4 •
M.22.3.4 2.2 4 •
M.24.3.2 2.4 2 •
M.32.3.2 3.2 2 •
MD.15.3.4 1.5 4 •
MD.22.3.4 2.2 4 •
MD.24.3.2 2.4 2 •
MD.32.3.2 3.2 2 •
Inspection cover with integrated levelsensor unit
-
8/17/2019 Grundfos Lifting Stations
15/28Multilift Stations Performance >15
Technical dataDischarge connection: DN 80 flange
with 110 mm socket
for flexible connection
Inlet connections: 3 x D N 1001xDN150
1 x D N 5 0
Connection for venting: 1 x DN 75
Connection for manually
operated diaphragm pump: 1 x D N 25
Sound pressure level:
-
8/17/2019 Grundfos Lifting Stations
16/28Multilift Stations Installation and Dimensions >16
Grundfos Multilifts M and MD
Horizontally 180 mm above Euro-standardised100
floor level water closets
250 mm above Wall mounted100
floor level water closets
Vertically At the top Various types of 100/of the tank drain pipes 150
Drain pipe from wash-50
basin, shower, etc.
Position of inlet portFor the
DNconnection of
The Grundfos Multilift M and MD are ideally suited
for installation below existing sewer level. TheMultilift M and MD are supplied complete with all
necessary flexible connections, clamps, bolts andnuts, anchor bolts for fixing to the floor, and a con-
troller with a 3 m cable for automatic operation.
Before installing the Multilift M and MD, ensure
that all local regulations covering access to thestations, venting, etc. are observed.
Installation
Optional inlet connectionsThe Grundfos Multilift M and MD offer the followingoptional inlet connection facilities:
The numbers on the drawing refer tothe accessories overview, page 25/26.
-
8/17/2019 Grundfos Lifting Stations
17/28Multilift Station Controllers >17
The LC 109 and LCD 109 controllers are designedfor the control of Multilift M and MD stations. The
controllers incorporate all necessary componentssuch as contactors, control board with lights for
indication of operating condition and alarms.
Control featuresThe LC 109 and LCD 109 controllers are designedfor direct on-line starting (DOL). In addition, the
controllers provide a number of control features,such as:
• Control of one or two pumps based on signalsfrom the level sensor in the tank.
• Automatic pump changeover (alternation).• Deselection of automatic test run during
long periods of inactivity (every 24 hours).
• Battery back-up in case of mains supply failure.• Starting delay within a range from 0 to 255 sec.(random) after returning from battery opera-
tion to mains operation.
• Selection of automatic alarm resetting.• Selection of automatic restarting.• Setting of stop delays matching the actual
operating conditions.
• Indication of liquid level.• Alarm indication of high liquid level, high
motor temperature, wrong phase sequence,
mains supply failure, and faulty pressureswitch assembly.
Dimensions Controllers
Multilift MD
Multilift M
-
8/17/2019 Grundfos Lifting Stations
18/28
Grundfos Multilift APLD – 400 l tanks
Multilift Station APLD >18
The Grundfos Multilift APLD is a low-noise
unit capable of handling large volumes of
wastewater and sewage. It is, therefore,
ideally suited for multi-user applications
such as blocks of flats, hotels and restaurants,
hospitals, schools, and other public buildings
as well as industry. The Grundfos Multilift
APLD is designed for installation below main
sewer level. The Multilift station collects the
sewage, lifts it and carries it forward to the
sewer system.
Multilift APLD
-
8/17/2019 Grundfos Lifting Stations
19/28Multilift Station APLD >19
Customer benefits
> Complete units ready for installation
> Gas and odour-proof
> Corrosion-resistant collecting tanks
> Straightforward installation
> Large tank capacity
> Possibility of parallel coupling ofup to 3 tanks
Ready to installThe Multilift APLD is fitted with two powerful
sewage pumps. The unit is supplied with eitherone or two 400-litre collecting tanks and a level
controller.
The pumps available for the systems are GrundfosAP70 or AP100. The AP70 pumps are delivered with
a base plate for horizontal installation includinga Ø100 flanged pipe stub. AP100 pumps have castfeet on the pump housing and a support for the
motor.
Multilift APLD with AP70 pumps are deliveredwith one 400-litre tank, and Multilift stations
with AP100 pumps are delivered with either oneor two 400-litre tanks. All necessary flexible con-
nections, clamps and anchor bolts are included.An LCD 103 level controller is supplied with the
units.
Isolating valves, non-return valves, discharge
pipes, a manually operated diaphragm pump,bolts and gaskets as well as a third 400-litre
tank are available as accessories.
Number of tanks 1 2 3
Total volume (l) 400 800 1200
Effective volume (l) 220 440 660
Max. inflow (l/sec.) 7.2 14.5 22.0
Pumped liquidsThe Multilift APLD is suitable for handling waste-water and other liquids containing solids up to
70 mm in diameter (AP70) or 100 mm (AP100),for instance fibres, textiles, and faeces, with a
pH value of 4 to 10.
The Multilift APLD handles liquid temperaturesbetween 0 and +40°C, for short periods of time
up to +60°C.
Tank volume
1 One or two powerful sewage pumps2 Non-return valve
3 Level sensor
4 400-litre collecting tank
5 Control panel
6 Connections for additional 400 l tank
1
2
3
4
5
6
-
8/17/2019 Grundfos Lifting Stations
20/28
Collecting tankThe 400-litre collecting tank is made of gas andodour-proof polyethylene. The tank has a DN 150
horizontal inlet, DN 100 vertical inlet, DN 70connection for vent pipe, DN 100 connections
for one or two pumps, and a DN 50 connectionfor a manually operated diaphragm pump.
All necessary flexible connections, clamps and
anchor bolts are included.
Parallel coupling of tanks
Flexible connections are included with the sys-tems to facilitate connection of two or three tanks
in parallel. This is effexted through the DN 150connections at the top and bottom on both sides
of the tank, and provides a total tank volume of 800 or 1200 litres respectively.
Parallel coupling of three tanksIf three tanks are coupled in parallel, the DN 150inlet pipe must always be connected to the third
tank. In order to avoid sedimentation, this tankmust be without a pump to act both as a collect-
ing tank and as a through-flow tank.
The third tank must be ordered separately as an
accessory. It is supplied with all the necessaryflexible connections, clamps and anchor bolts.
Multilift Station APLD Performance >20
Performance
0 50 100 150 Q [m3/h]
0 5 10 15 20 25 30 35 40 45 Q [l/s]
0
2
4
6
8
10
12
14
16
18
20
22
H[m]
Min. flow with pressure pipe DN 100
Min. flow with pressure pipe DN 150
Multilift StationsAPL(D)100, 50 Hz
A P L ( D ) 1 0 0 . 6 1 / 4 0 0
A P L ( D ) 1 0 0 . 5 4 / 4 0 0
A P L ( D ) 1 0 0 . 4 5 / 4 0 0 A P L ( D ) 1 0 0 . 3 2 / 4 0 0 A P L ( D ) 1 0 0 . 2 4 / 4 0 0
Multilift StationsAPL(D)80, 50 Hz
Min. flow with pressure pipe DN 80
0 25 50 75 100 Q [m3/h]0
2
4
6
8
10
12
14
16
H[m]
0 5 10 15 20 25 Q [l/s]
Min. flow with pressure pipe DN 100
A P L ( D ) 8 0 . 1 9 / 4 0 0
A P L ( D ) 8 0 . 1 3 / 4 0 0 A P L ( D ) 8 0 . 2 4 / 4 0 0
A P L ( D ) 8 0 . 0 9 / 4 0 0
Grundfos Multilift Station APLD – 400 l tanks
Parallel coupling of three tanks.
-
8/17/2019 Grundfos Lifting Stations
21/28Multilift Station APLD Technical Data >21
Electrical data, type designation and product numbers
Multilift APLD VoltageP1 / P2 IN Cos IStart / Tank volume Weight Product[kW] [A] IN [l] [kg] number
3 x 230 1.20/0.90 4,5 0.70 4.8 400 135 96002648
3 x 400 1.20/0.90 2.6 0.70 4.6 400 135 96002644
3 x 230 1.70/1.30 5.8 0.78 3.7 400 135 96002649
3 x 400 1.70/1.30 3.3 0.78 3.6 400 135 96002645
3 x 230 2.70/1.90 9.6 0.80 4.4 400 187 96002650
3 x 400 2.70/1.90 5.5 0.80 4.2 400 187 96002646
3 x 230 3.50/2.40 11.0 0.80 4.4 400 187 96002651
3 x 400 3.50/2.40 6.3 0.80 4.3 400 187 96002647
3 x 400 3.00/2.40 5.9 0.79 6.2 400 295 96002307
3 x 400 4.00/3.20 7.5 0.84 6.0 400 307 96002308
3 x 400 5.50/4.50 10.6 0.84 6.0 400 321 96002309
3 x 400 6.50/5.40 12.0 0.84 6.4 400 343 96002310
3 x 400 7.50/6.10 13.6 0.83 5.7 400 343 96002311
3 x 400 3.00/2.40 5.9 0.79 6.2 800 350 96002312
3 x 400 4.00/3.20 7.5 0.84 6.0 800 362 96002313
3 x 400 5.50/4.50 10.6 0.84 6.0 800 376 96002314
3 x 400 6.50/5.40 12.0 0.84 6.4 800 398 96002315
3 x 400 7.50/6.10 13.6 0.83 5.7 800 398 96002316
APLD.80.09/400
APLD.80.13/400
APLD.80.19/400
APLD.80.24/400
APLD.100.24/400
APLD.100.32/400
APLD.100.45/400
APLD.100.54/400
APLD.100.61/400
APLD.100.24/400-2
APLD.100.32/400-2
APLD.100.45/400-2
APLD.100.54/400-2
APLD.100.61/400-2
APLD, single 400-litre tank. APLD, two 400-litre tanks connected in parallel.
-
8/17/2019 Grundfos Lifting Stations
22/28Multilift Station APLD Installation >22
Grundfos Multilift Station APLD – 400 l tanks
Installation
System with 2 pumps and 3 tanks
All pipe connections to the Multilift station must be carried out with noise-absorbing flexible connections,
and all pipes in connection with the lifting station must be supported in such a way that they do not stressthe station.
The numbers on the drawing refer to
the accessories overview, page 25/26.
-
8/17/2019 Grundfos Lifting Stations
23/28Multilift Station APLD Dimensions >23
Dimensions in mm
Type key
Pump type A C D E F G H K
AP70 1814 536 380 DN 80 260 180 820 90
AP100 2062 784 465 DN 100 300 190 955 123
Example APL D .100 .24 /400-2Type rangeWith two pumps
Nominal diameter (mm) of discharge port (AP70)
Power output P2/100 [W]Two 400-litre tanks
Dimensions
Multilift Stations APLD
-
8/17/2019 Grundfos Lifting Stations
24/28Multilift Station APLD Controller >24
Grundfos Controller LCD 103
The level sensor is factory set to stop the system
before air enters the pumps.
Levels
In addition to the indicator lights, the followingfunctions are available on the controller front:
• Function selector with positions:Man, 0 and Aut
• On/off switch for built-in acoustic alarm• Reset button for motor starter
The LCD 103 controller automatically ensures
an even distribution of operating hours on bothpumps by changing the starting sequence after
each pump stop (alternation).
A back-up accumulator maintaining the alarmsignal in case of supply failure is available as an
accessory. The accumulator ensures that an alarmcan be given within 15 hours after the electricity
supply has been switched off.
Start level 1 Start level 2 Alarm level
APLD 200 l 220 l 260 l
The LCD 103 level controller features a pneumatic-
ally operated level sensor, motor protection and
monitoring of pump operation. The controller is
designed for wall mounting.
The operating conditions (pump failure, high-
level alarm, phase sequence, and operation)
are indicated by indicator lights on the front
cover. An acoustic alarm can be given in case
of system failure. Furthermore, an external
alarm device can be connected to a potential-
free NO-contact.
-
8/17/2019 Grundfos Lifting Stations
25/28Accessories >25
Accessories
A range of accessories is available for the Grundfos Lifting Stations.
The accessories must be ordered separately.
PosAccessories
Picture Description Dimensions M/MD APLD
Pump type Productnumber
2
1
3
4
5
6
7
8
9
DN 150 • 96 00 37 01
Bolts, nuts and gasket, 8 of each 16 x 65mm DN 80 • • 96 00 19 99
Bolts, nuts and gasket, 8 of each 16 x 65mm DN 100 • • 96 00 38 23
Bolts, nuts and gasket, 8 of each 20 x 75mm DN 150 • 96 00 36 05
DN 80 • • 96 00 20 11
DN 100 • • 96 00 20 12
DN 150 • • 96 00 34 27
DN80 • 96 00 20 09
DN100 • 96 00 20 85
DN 80/80 • • 96 47 78 93
DN 80/100 • • 96 07 53 63
DN 100/100 • • 96 47 78 94
DN 150/150 • • 96 47 78 95
Ø53 • • 96 47 29 43
Ø75 • • 96 07 54 23
Ø110 • • 96 07 54 22
Ø160 • • 96 47 30 60
Ø53 • • 96 07 54 27
Ø75 • • 96 07 54 26
Ø110 • • 96 07 54 25 Ø160 • • 96 47 30 61
1" • 96 00 01 88
11/2” • 96 00 37 21
DN80/80 • 96 00 37 04
DN80/100 • 96 00 37 05
DN100/100 • 96 00 37 06
DN100/150 • 96 00 37 07
Isolating valve
Non return valve
cast iron ball-type PN10
Flanged socket for PVC pipe
Flange/hose unit
Flexible connecting piece
Clamp
Manually operated diaphragm pump
Breeches pipe
-
8/17/2019 Grundfos Lifting Stations
26/28Accessories >26
Accessories
PosAccessories
Picture Description Dimensions M/MD APLD
Pump type Product
number
12
11
13
14
15
16
17
18
19
• 96 47 78 96
400 l • 96 00 37 18
• 96 00 25 20
• • 62 50 00 20
Indoors • • 62 50 00 22
Outdoors • • 62 50 00 21
230 V • 96 00 25 14
400 V • 96 00 25 15
230 V • 96 00 25 16
400 V • 96 00 25 17
230 V • 96 00 25 18
400 V • 96 00 25 19
25 A • • 96 00 25 11
40 A • • 96 00 25 12
80 A • 96 00 25 13
Accumulator for controller, 9.6 V
Signal lamp
Cover plate
Signal horn
Hour counter
Start counter
Combined hour and start counter
External main switch for supply cable
Extra tank number 3 incl. two
flexible connections, clamps and anchor bolts
-
8/17/2019 Grundfos Lifting Stations
27/28The Range >27
The Grundfos Wastewater Range
The sewage grinder
pumps rangeBrochure covers the newGrundfos range of sewage grinder
(SEG) pumps for pumping of
wastewater with toilet discharge.
Heavy-duty submersible
sewage pumpsBrochure covers the Grundfos rangeof submersible channel impeller
pumps from 1.65 kW up to 21 kW
and SuperVortex pumps up to
29 kW. All designed for handling
unscreened raw sewage.
Heavy-duty submersiblesewage pumpsBrochure covers the Grundfos
range of sewage pumps from 16 kWup to 155 kW for handling of raw
sewage in heavy-duty applications.
Super heavy-dutysubmersible sewage andraw water pumps
Brochure covers the Grundfos rangeof super heavy-duty channel pumps,
axial flow pumps, and propeller
pumps from 2.8 kW up to 520 kW.
The stainless steel range forpumping of corrosive liquids
Brochure covers the Grundfos
range of heavy-duty stainless
steel pumps (SEN) for aggressive
and corrosive environments.
The KP/AP stainlesssteel range
Brochure covers a wide range of
high quality stainless steel pumps
for a variety of domestic and
commercial applications.
The portable dewateringpumps rangeBrochure covers the Grundfos range
of portable dewatering pumps (DW)
from 0.8 kW to 20 kW for pumping
raw water with abrasives.
The range of controlsBrochure covers the Grundfos
range of controls for the waste-
water pumping systems.
-
8/17/2019 Grundfos Lifting Stations
28/28
Being responsible is our foundationThinking ahead makes it possible
Innovation is the essence
9 6 4
8 6
2
5 0 0
5
0 2
V E N T U R E M A R K E T I N G
A S
Business with an attitude
Knowledge The sharing of knowledge, experience
and expertise across our global network will always
lead our business forward.
Innovation Combining the best technology with
fresh ways of thinking, we will continue to develop
even better pumps, systems, services and standards.
Solution With a complete product range, capableof providing every conceivable water solution, we are
the most complete player on the market.