group 0.000 engine clutch

j~W~IRDPARTS CATALOGUE

GROUP 0.000ENGINE - CLUTCH

ILLUSTRATION INDEX

Description lilust. No.

1970-76 ENGINE IDENTIFICATION A- D

8 CYL. ENGINE CYLINDER HEAD 18 0Th. ENGINE BLOCK AND RELATED PARTS 2- 38 CYL. ENGINE COOLING AND OILING PARTS 4 - 58 CYL. ENGINE FUEL AND EXHAUST PARTS 0- 71967-69 ORC. 6 CYL. ENGINE BLOCK AND COMPONENTS 8- 91967-69 OtIC. 6 CYL. ENGINE HEAD AND CAMSHAFT 10-111967-69 O.H.C. 6 CYL. ENGINE MANIFOLD AND CARBURETOR 12- 131967-69 O.H.C. 6 CYL. ENGINE FRONT COVERS AND WATER PUMP 14 - 151967-69 O.H.C. 6 CYL. ENGINE — DISTRIBUTOR, OIL PUMP,

OIL FILTER AND FUEL PUMP HOUSING 16-171970-75 6 CYL. ENGINE BLOCK 181970-75 6 CYL. ENGINE HEAD AND MANIFOLD 191976 6 CYL. ENGINE HEAD, MANIFOLD AND RELATED PARTS 20-211976 6 CYL ENGINE BLOCK AND RELATED PARTS 22-23CLUTCH AND FLY WHEEL 241967-76 CLUTCH LINKAGE 25-271967-76 ENGINE AND TRANSMISSION MOUNTING 28-30

IGMI-YM1YThL~YJPONTIAC ENGINE IDENTIFICATION

CODE LOCATION: 231 V/6 Engine Code located to the left of the Water Pump Housing.

250 (L6) Engine Code located on the Distributor Mounting Pad at the right side of theBlock.Pontiac 8 Cyl. (Blue) Engine (Exc. 350 Engine on 1975-76 Ventura and 260 Engine)

Code is located beneath the Engine Production Number on a machined pad on theright hand bank of the Engine Block.260 Engine Code is located on the Oil Filler Tube at the front of the Engine.350 Engine Code on 1975-76 Ventura is located to the left of the Water Pump Housing.

Chevrolet 8 Cyl. (Orange) Engine Code is located on the top-front of the right handbank of the Cylinder and Case, as close as possible to upper end of the Pad.

1970 ENGINE CODE CHART*

*Note: For reference only, do not order engines from this chart.

ENGINE

250 6 Cyl. Eng. 350 Engine 400/2 BC/Eng. 400/4 BC/Eng. 455 Engine

CO W7 WE WS WARF WU XX WY WOZB X7 YB WX XFZO YU YD WW YA

XH YHXPXVXzYSYz

1971 ENGINE CODE CHART*

* For Reference Only — Do Not Order Engines From This Chart

ENGINE

Orange (Chev) Eng. Blue (Pontiac) Eng.

250(6 CyI.)Eng. 307 Eng. 350 Eng. 350 Eng. 400/2 BC/Eng. 400/4 BC/Eng. 455/2 BC/Eng. 455/4 BC/Eng.

ZB CCA COA WN WS WK WO WCCCC COB WP WX WY YO Wi

CAA CGC WR YX VS WICAB COD WU XX YA

COJ XR YCCOK YN YECOL YP

COP YUCOR

CJ BCi DCJGCi HCii

A

j~~flIRflPARTS CATALOGUE

PONTIAC ENGINE IDENTIFICATIONCODE LOCATION: 231 V 6 Engine Code located to the left of the Water Pump Housing.

250 (L6) Engine Code located on the Distributor Mounting Pad at the right side of theBlack.Pontiac 8 Cyl. iBluel Engine (Eec. 350 Engine an 1975-76 Ventura and 260 Engine)

Code ;s located beneath the Engine Production Number an a machined pad on theright hand bank of the Engine Black.

260 Engine Code is located on the Oil Filler Tube at the front of the Engine.

350 Engine Code an 1975.76 Ventura is located to the left of the Water Pump Housing.Chevrolet 8 Cyl. (Orangel Engine Code is located an the top-front of the right handbank of the Cylinder and Case, as close as possible to upper end of the Pad.

140 Engine (4 Cyl.) Code is located apposite the 43 Cylinder on the right side of theCase on the Pad on the lett side as close to the rear as possible.

1972 ENGINE CODE CHART*For Reference Only — Do Nat Order Engines From This Chart

ENGINE

6 cyl.250 Eng.

8 Cyl. O’CH’E1range, es., ng.

1 B Cyl. Blue (Pontiac) Eng.40012BC/Eng. 400/4BC/Eng. 455/2BCIEng. 455/4BCIEng.307 Eng. 350 Eng. 350 Eng.

W6 CKG CAR WR YX WK YH WDY6 CTK CDA YR WS WMCR0 CDB YU YS YA

COD YV ZS YBCKH CDG YC

C KA YECKBCKDCKKC KS

C KTCMBCMDCMHCR0CR0CRKCRLCSH

CSJCTL

1973 ENGINE CODE CHART*Far Reference Only — Do Not Order Engines From Tnis Chart

140 Eng.

CAACABCACCAD

250 Eng.

CiACIC

400 Eng.

CTACTBCTDCTJCSUCSwCSX

ENGINE

350/2BC/Eng. 350/4BC/Eng. 400/2BC/Eng. 400/4BC/Eng. I 455 Eng.

WAWBYAYBYC

WNWPYNYPYS

YFYHYJ

YK

WRWTYZ

W8Y4Y6YEY9YRYUYXYY

4 Cyl. 6 Cyl.B Cyl. Orange

(Chev) Eng.B Cyl Blue (Pontiac) Eng.

B

350 Eng.

CKBCKHCKUC LiCLKCMA

C/ACCMDCMHCMJCMRC MS

CMT

WM FIREBIRDPARTS CATALOGUE

PONTIAC ENGINE IDENTIFICATION

CODE LOCATION: 140 Engine 14 Cyl.l Cade lacated appasite the #3 Cylinder an the right side of theCase an the Pad an the left side as clase ta the rear as possible.1.4 and 1.6 Litre Engine Code located on the Pad on the right side of the CylinderBlack, farword at the Exhaust Manifald.153 (4 Cyl.) and 250 16 Cyl.) Engine Cade lacated an the right side of the Engine atthe rear of the Distributor.B Cyl. Engine Code located on top-front of right bank of Cylinder and Case, as claseas possible to upper end at Pod.

140 Engine (4 Cyl.) Code is located opposite the #3 Cylinder on the right side of theCase on the Pad on the left side as close to the rear as possible.

1974 ENGINE CODE CHART** Far Reference Only — Do Not Order Engines From This Chart

ENGINE

4 Cyl. 6 Cyl.

8 Cyl. Orange

(Chey) Eng.

B Cyl. Blue (Pontiac) Eng.

140 Eng. 250 Eng. 350 Eng. 400 Eng. 350/2BC/Eng. 350/4BC/Eng. 400/2BC/Eng. 400/48C/Eng. 455 Eng.

CAA CiA CKB CIA WA WN YE WR ‘#48

CAB CJC CKH CIB WB WP YH WI Y4CAC CKU CID YA YN Vi YZ Y6CAD Cli Cli YB YP YK YB

CIK CSU YC YS Y9CMA CSW YRCMC CSX YuCMD YX

CMH YYCMJ

CMRCMSCMI

1975 ENGINE CODE CHART** Far Reference Only — Do Not Order Engines From This Chart

ENGINE

a c~t. Orange4 c~t. leg. 6 Cyt. leg. I Cyl. Eng. IckevI Eng. I c~t. Blue IPeetiecl Engine

1401t tcl 140/28c/ 350(25c/ 350/4BC1 40012 mcI 400(45c1leg. leg. 250 leg. 260 Eng. 350 leg. 400 Eng. leg. leg. leg. Ing. 455 Eng.

SB AM it QA CHW CSH Ri RW YH WI YUBC AR JI GD CMB CSR RS RX YM YW

AS iU GE CMH CSS YA WN YS ZUAT Gi CMi CTB YB YN VT ZW

TE CML CIt ZP ZITi CMM CIM

CMU CIRCMX CISCMY CTUCRC CIXCRD CIVCRECRSCR1CRUCRWCRXCRY

CRZCUHCUi

CUMCUS

C

PARTS CATALOGUE1GM fl~IRD

PONTIAC ENGINE IDENTIFICATION

CODE LOCATION: 231 V/6 Engine Code located to the left of the Water Pump Housing.

250 (L6) Engine Code located on the Distributor Mounting Pad at the right side of theBlock.

Pontiac 8 Cyl. (Blue) Engine (Exc. 350 Engine on 1975-76 Ventura and 260 Engine)

Code is located beneath the Engine Production Number on a machined pad on theright hand bank of the Engine Block.

260 Engine Code is located on the Oil Filler Tube at the front of the Engine.

350 Engine Code on 1975-76 Ventura is located to the left of the Water Pump Housing.

Chevrolet 8 Cyl. (Orange) Engine Code is located on the top-front of the right handbank of the Cylinder and Case, as close as possible to upper end of the Pad.

140 Engine (4 CyI3 Code is located opposite the #3 Cylinder on the right side of theCase on the Pad on the left side as close to the rear as possible.

1976 ENGINE CODE CHART** For Reference Only — Do Not Order Engines From This Chart

ENGINE

V6 Eng. L6 Eng. VS Eng.B Cyl. Orange

(Clsev.) Eng. S Cyl. Blue (Pontiac) Eng.

140/I BCI14O/28C/ 1.4 1.6 350/2 BC/ 350/4 BC/ 400/2 SC/ 400/4 BC/Eng. Eng. Litre Litre 231 Eng. 250 Eng. 260 Eng. 350 Eng. 400 Eng. Eng. Eng. Eng. Eng. 455 Eng.

BH BK CDA CNA FH CC QA PA CSB PA PE YC WT WXBi BI CDB CNB Fl CD OB PB CSF PB PF Vi Y6 Y3

BS CDC CYA Fi CF OC PE CSi TP PM Y7 Y4BT CDD CYB FO OD PP CTL TT PN VS Y8

CDF CYC OK PM CTM YA ZX YT Z3CDH CYD ON PN CTU YB YY ZACDi CYF OP P0 CTW VP YZ ZBCDK CYH OT PP CTX YR ZACDL CYi TE CHW CTY ZKCDM CYK Ti CKJ CUCDN CYL CKKCDR CYM CKMCDS CYR CIFCDT CYS CLH

CDU CYT CMBCDW CYU CMHCDX CYW CMJCDV CYX CMLCVA CYV CMMCVB CYZ

D

PARTS CATALOGUE1GM flflR1

Group No. Key I~rt Name

1 — PLUG, Valve Rocker Arm Cover Hole -

Neoprene (1 5/16” O.D.)2 — COVER, Valve Rocker Am,3 — BOLT, Rocker Ann Cover4 — GASKET, Valve Rocker Arm Cover5 — BAFFLE ASM., Valve Rocker Arm Cover6 — NUT, Baffle to Cyl. Head (3/8—16)7 — CLIP, Valve Rocker Arm Cover Baffle Support8 — LOCK, Valve Spring Cup9 — CUP, Valve Spring

10 — SEAL, Valve Guide11 — SHIELD, Valve Spring12 — SPRING, Valve — Outer13 — SPRING, Valve — Inner14 — PLUG, Cyl. Head A.I.R. Gallery

(3/8” Sq. Headless)15 — PLUG, Cyl. Head Core Hole (1 3/8” Dio.)16 — BOLT, Cylinder Head (1/2—13 x 3 3/8”)17—PLUG, Cylinder Head Oil Hole (21/64”)18 — BOLT, Cylinder Head (1/2~-13 x 2 3/16” Stud)19 — BOLT, Cylinder Head (1/2—13 x 4”)20 — SPACER, Cylinder Head Bolt

(17/32” l.D. x 1” O.D. x 3/8”)

0.3860.3860.4130.4230.3548.9170.4 130.3100.3090.3080.3080.3080.303

0.0340.0340.2930.0340.2930.293

0.293

21 — BOLT, Cylinder Head (1/2—13 x 2 3/16”) -

22 — VALVE, Intake23 — VALVE, Exhaust24 — HEAD, Cylinder25 — PLUG, Cyl. Head A.I.R. Gallery

(3/S’ Sq. Headless)26 — PLUG, Cyl. Head Care Hole (1 3/8” Dia.).27 — GASKET, Cylinder Head28 — PIN, Cylinder Head Locating Dowel (5/16”xll/16”)29 — LIFTER ASM., Valve30 — GUIDE, Valve Push Rad (2nd Type)31 — ROD, Valve Push (Part of Pkg.)32 — PLUG, L.H. Cyl. Head Core Hole (1 3/16” Dia.)33 — GUIDE, Valve Push Rod (1st Type)34 — STUD, Valve Rocker Arm Ball35 — BOLT, Guide to Cyl. Head (5/16—18 x 3/4”)36 — FITTING, Heater Hose to Cylinder Head37 — STUD, Valve Rocker Arm Ball (.005 0.5.) .

38 — ARM, Valve Rocker (Part of Pkg.)39 — BALL, Valve Rocker Arm (Part of Pkg.)40 — NUT, Valve Rocker Arm (Part of Pkg.)41 — BOLT, Cylinder Head (1/2—13 x 3 5/8” Stud)

Key

8-CYL. ENGINE CYLINDER HEAD

Part Name Group Na.

0.2930.2960.2970.269

0.0340.0340.2890.2930.4590.4290.3330.0340.4290.4291.4288.8660.4290.3330.3330.3330.293

GROUP 0.000 ILLUSTRATION 1

~T7~IRDPARTS CATALOGUE

8-CYL. ENGINE BLOCK& RELATED PARTS

“111D 0.000 ILLUSTRATION 2’

PARTS CATALOGUE1GM TThflIR18 CYL. ENGINE BLOCK& RELATEDPARTS

Key Port Name Group No.

— BLOCK ASM., Cylinder ............. ... 0.0332—PLUG, Cylinder Block Oil Gallery (9/16”).....::::::..::..... 0.0343 — CAMSHAFT, Engine 0.5194 — BEARING, Camshaft—Rear 0.5395 — BEARING, Camshaft—Rear Center 0.5396 — BEARING, Camshaft—Center & Front Center 03397 — BEARING, Camshaft—Front . . . . . 0.5398 — KEY, Camshaft Sprocket (#9~3y~g~; hA”~)

1 :::::.~ . . . 0.7389 — NUT, Connecting Rod Bait (3/8-24) 0.626

10 — ROD ASM., Connecting 0.603II — BEARING PKG., Connecting Rod 0.61612 — BOLT, Connecting Rod (3/8—24 x 2 1/2”) 0.62313 — PISTON & PIN ASSEMBLY 0.62914 — RING, Piston Oil 0.64315 — RING, Piston Compression — Lower 0.64316—RING, Piston Compression—Upper 0.6.4317—RING SETS, Piston 0.6.4318 — PIN, Piston 0.63619 — PLATE, Camshaft Thrust 0.53320 — ECCENTRIC, Fuel Pump (md. in Pkg.) 3.93521 — BUSHING, Fuel Pump Eccentric (IncI. in Pkg.) 3.93522 — WASHER,Camshaft Sprocket (1/2” Dia.) 0.73823 — BOLT, Camshaft Sprocket to Cam (1/2—20 x 1”) 8.90024 — BEARING PKG., Crankshaft—Rear Center 0.09625 — BEARING PKG., Crankshaft—Center 0.09626 — BEARING PKG., Crankshaft—Front Center 0.09627 — BEARING PKG., Crankshaft—Front 0.09628 — KEY, Crankshaft Sprocket 0.72929 — CRANKSHAFTASSEMBLY 0.64630 — CHAIN, Timing 0.72431 —SPROCKET,Camshaft 0.73632— GASKET, Water Pump to Timing Chain Cover 0.20733 — LOCKWASHER, Thrust Plate to Cyl. Block (5/16”) 8.93134— BOLT, Thrust Plate to Cyl. Block (5/16~18 x 3/4”) 8.90035 — COVER ASM., Timing Chain (Inc1 .ff45) . 0.20636 — CLAMP, Timing Chain Cover to Intake Manifold 0.21937 — BOLT, Cover to Intake Manifold (5/16”—18 x 3 5 8”) 0.20638 — STUD, Timing Chain Cover to Black (3/8—3 11 16”) . . . . . 0.20639 — WASHER,Timing Chain Cover to Block (13/32” l.D. x 13/16” 6.6.) . . 8.92940 — NUT, Timing Chain Cover to Block (3/8—24) 8.91641 — SPACER, Stud to Timing Chain Cover N.S.42 — BALANCER ASM., Harmonic . . .. 0.65943 — WASHER,Boloncer to Crankshaft (2~/32” i.b: yi&’Th:6.i: . ~1 0.66244 — BOLT, Balancer to Crankshaft (5/8—18 x 1 5/8”) 0.66245 — SEAL, Timing Chain Cover Oil 0.21346—BOLT, Timing Chain Cover to Cyl. Block (3/8—16 x 2 5/8”) 8.90047 — WASHER, Timing Chain Cover to Cyl. Block (13/32” I.D. x 13/16” 0.0.) 8.92948 — DOWEL, Timing Chain Cover to Cyl. Block N.S.49_— SPROCKET, CranKsnaft . . 0.72850 — PIN, Bearing Cap Dowel (5/16” O.D. x 11/16” Lan~) ~.... ....... 0.29351 — CAP, Crankshaft Bearing (400 C.l.) N.S.52 — BOLT, Crankshaft Bearing Cap (1/2”—13 x 3 5/8”) 0.05653 — CAP, Crankshaft Bearing (428 C.I.) N.S.54 — WASHER, Bearing Cap Bolt (17/32” I.D. x 7/8” O.D. x 3/32”) 0.06055 — BOLT, Crankshaft Bearing Cap (1/2—13 x 3 15/16”) 0.05656 — Bolt, Crankshaft Bearing Cap—Outer (1/2”— 13 x 2”) 0.05657 — BEARING PKG., Crankshaft — Rear 0.09658 — PACKING, Rear Bearing Oil Seal 0.13759 — SHIM, Flywheel to Crankshaft 0.66660 — PLAIE & RING GEAR ASM., Flywheel (Auto. Irons.) 0.66661 — PLATE, Flywheel Reinforcement N.S.62 — BOLT, Flywheel to Crankshaft (1/2—20 x5/8”) 0.66963 — BEARING, Crankshaft Clutch Pilot 0.64964 — GEAR, Flywheel Ring (Manual Trans.) 0.67365 — FLYWHEEL ASM., Engine (Manual Trans.) 0.66666 — BOLT, Flywheel to Crankshaft (1/2—20 x 7/8”) 0.66967 — PLUG, Cyl. Block Core Hale (1 15/16”) 0.03468 — PLUG, Cyl. Black Drain (1/8”) 0.03469 — PIN, Cyl. Black to Flywheel Housin Locating (21/32” x 1 1/4”) 0.68570 — PLUG, Cyl. Black Care Hole (1 15,36”) 0.03471 — PLUG, Cyl. Block Ofl Gallery (15/16”) 0113472 — PLUG, Camshaft Rear Bearing Hole (2 1/16”) 0.03473 — PLUG, Cyl. Block Oil Gallery (3/8” Sq. Headless) 0.034


WM FIREBIRDPARTS CATALOGUE

8 CYL. ENGINE COOLING& OILING PARTS

a

‘V

Ii

a,


PARTS CATALOGUE

8-CYL. ENGINE COOLING & OILING PARTS

Key Part Name Group No.

— BOLT, Outlet Fitting to Intake Manifold (3/8—16 x 1”) 8.9002 — WASHER, Outlet Fitting to Intake Manifold (.401 l.D. sc .764 O.D.). - . . N.S.3 — FITTING, Intake Manifold Outlet 1.1534 — GASKET, Intake Manifold Outlet 1.1545 — THERMOSTAT, Engine Water Temperature 1.2’466—CAP, Oil Filler 1.7587 — ROD, Oil Level Indicator 1.5168 — ADAPTER, Oil Filter to Cyl. Block ?.8379 — SCREW, Oil Filter Adapter to Block (3/8—16 x 2—Cap) 1.837

10 — BOLT, Oil Filter to Cylinder Black (3/8—16 x 1 1/4”) 8.9001! — LOCKWASHER, Oil Filter to Cylinder Black (3/8”) 8.93112 — WASHER, Oil Filter to Cyl. Block (13/32” I.D. x 13/16” O.D. x 1/16”).. . 8.92913 — BOLT, Adapter to Cylinder Black (3/8-16 x 2”) 8.90014 — LOCKWASHER, Adopter to Cyl. Black (3/8”) 8.93115 — WASHER, Adapter to Cyl. Block (13/32” I.D. x 13/16” O.D. x 1/16”). . . . 8.92916 — SWITCH, Engine Oil Pressure 1.80017 — FLFMFNT P1(0_ flit Filter 1.93618 — FILTER ASM., Oil 1.83519 — GASKET, Filter to Adapter or Cyl. Block 1.84420 — TUBE, Oil Level Indicator—Lower 1.51621 — SHAFT, Oil Pump Drive 1.63922 — GASKET, Oil Pump to Block 1.~ss23 — PUMP ASM., Oil 1.65224 — BOLT, Oil Pump to Cylinder Black (3/8—16 x 1 1/2”) 8.90025 — GEAR & SHAFT PKG., Oil Pump Drive 1.63926 — COVER, Oil Pump Body 1.72327 — BOLT, Oil Pump Cover to Body (5/16-18 x 3/4”) 8.90028 — GASKETPKG., Oil Pan 1.42929 — BOLT, Oil Pan to Cylinder Black 1.42830 — PAN, Engine Oil 1.42631 — SCREW, Oil Pan Drain 1.45332 — GASKET, Oil Pan Drain Screw 1.45633 — BAFFLE, Engine Oil 1.43034 — BOLT, Baffle to Bearing Caps (5/16”-1B x 3/4”) 8.90035 — LOCKWASHER, Baffle to Bearing Caps (5/16”) 8.93136 — SHAFT, Oil Pimp Driven Gear 1.63937— SCREEN ASM., Oil Pump 1.65638 — BALL, Oil Pressure Regulator 1.60939 — SPRING, Oil Pressure Regulator 1.60940 — RETAINER, Regulator Spring 1.60941 — TUBE, Oil Level Indicator—Black to Baffle 1.51642 — HOUSING, Water Pump (Part of Pump Pkg.) 1.06943 — DIVIDER, Water Pump (Part of Pump Pkg.) 1.06944 — GASKET, Water Pump to Timing Chain Cover 1.07945 — PUMP ASM., Water (Includes #44) 1.06946 — STUD, Water Pump to Cover (5/16-24 x 5/16-18 x 1 1/2”) 1.07347— NUT, Water Ptmtp to Cover (5/16—24) 8.91748 — HUB, Water Pump & Fan 1.06249 — PULLEY, Water Pump & Fan 1.06250 — BOLT, Engine Fan to Clutch (5/16—18 x 5/8”) 8.90051 — CLUTCH ASM., Engine Fan Fluid 1.05052 — BOLT, Fluid Clutch to Water Pump Shaft Flange (5/16—24 x 3/4”) 8.90053 — BOLT, Fan to Water Pump Flange (5/16-24 x 3 1/4”) 8.90054 — FAN, Engine 1.06455 — SPACER, Engine Fan 1.06456 — BOLT, Water Pump to Timing Chain Cover (5/16—18 x 1 1/B’) 8.90057 — BOLT, Water Pump to Timing Chain Cover (5/16—18 x 1 3/4”) 8.90058 — WASHER, Outlet Fitting to Intake Manifold (.401 l.D. x .734 O.D.) N.S.59 — BOLT, Outlet Fitting to Intake Manifold (3/8—16x 1 15/16” Special) . . . 1.153


8-CYL. ENGINE FUEL & EXHAUST PARTS


PARTS CATALOGUE1GM 7E~IR1

PARTS CATALOGUE

8-CYL. ENGINE FUEL & EXHAUST PARTS


1 — NUT, Air Cleaner to Carburetor (1/4—20 Wing) 3.4032 — CLEANER & SILENCER, Carburetor Air 3.4023 — GASKET, Air Cleaner to Carburetor 3.4034 — STUD, Air Cleaner to Carburetor 3.403S — BOLT, Carb. to Manifold (5/16-18 x 1 1/4) 8.9006 — CARBURETORASSEMBLY 3.7257 — GASKET, Corb. to Manifold 3.7268 — STUD, Carb. to Manifold (5/16—18 x 2 1/8—Hollow) 3.2889 — NIPPLE, Crankcase Vent Hose to Manifold (1 1/16—Press In) 1.745

10—ELBOW, Crankcase Vent Hose to Manifold 1.74511 — PIPE & STOVE ASM., Carb. Air Heater 3.41712 — HOSE, Crankcase Vent Connector to Fitting 1.76213— HOSE, Crankcase Vent Connector to Fitting (5/32” ID. x 31/4”) 1.76214 — CONNECTOR, Crankcase Vent Hose 1.74515 — MAN FOLD;, Intake 3.26516 — SEAL, Intake Manifold to Timing Chain Cover (5/8” ID. x 1” OD.) 0.21317 — BOLT, Bracket & Manifold to Cylinder Head (3/8—16 x 1 3/8”) N.S.18 — BOLT, Push Rod Cover to Cyl. Block (5/16—18 x 2 1/2) 8.90019 — GASKET, Push Rod Cover to Cyl. Block (5/16”—Round) 0.44320 — BOLT, Push Rod Cover to Cyl. Block (5/16—18 x 2”) 8.90021 —CdVER, Valve Push Rod 0.43922 — GASKET, Valve Push Rod Cover 0.44323 — PUMP ASM., Fuel (Package) 3.90024 — WASHER, Fuel Pump to Timing Chain Cover 3.90125 — BOLT, Fuel Pump to Timing Chain Cover (3/8—16 x 1 1/4) 3.90126 — GASKET, Fuel Pump Flange 3.90427 — GASKET, Exhaust Manifold 3.27028 — MANIFOLD, Exhaust 3.60129 — PIN, Heat Control Valve Anchor 3.64730 — THERMOSTAT, Heat Control Valve 3.64031 — BAFFLE, Exhaust Manifold Thermostat 3.64132 — BUSHING, Heat Control Valve 3.64633 — VALVE, Manifold Heat Control N.S.34 — BOLT, Manifold to Cylinder Head (3/8—16 x 2 1/2”) 8.90035 — LOCK, Exhaust Manifold Bolt 3.27536 — SPACER, Manifold Heat Control Valve 3.64137 — SHAFT, Manifold Heat Valve N.S.38 — BRACKET, Heat Control Valve Stop 3.64139 — PAD, Manifold Heat Control Valve Stop 3.64740 — GROMMET PKG., Crankcase Vent 1.74541 — VALVE PKG., Crankcase Vent 1.74542 — TUBE, Intake Manifold Choke Heat (Internal) 3.60343 — GASKET, Intake Manifold 3.27044 — RETAINER, Intake Manifold Gasket 3.27045 — BRACKET, Crankcase Vent Hose 1.76246 — WASHER, Manifold to Cyl. Head (13/32” ID. x 3/4” 0.0.) 3.27547—HOSE, Crankcase Outlet Valve to Connector (5/16” ID. x 29”) 1.76248 — BOLT, Intake Manifold to Cyl. Head (3/8—16 x 1 1/2”) 3.27549 — BUSHING, Throttle Control Cross—Shaft Engine Bracket 3.42550 — BRACKET ASM., Throttle Control Cross—Shaft Engine 3.45951 — WASHER, Bracket to Cyl. Head (13/32” ID. x 3/4” OD.) 3.46352 — BOLT, Bracket to Cyl. Head (3/8—16 x 3/4”) 8.90053 — BOLT, Bracket to Cyl. Head (3/8-16 x 1 1/2”) 3.27554 — BRACKET, Throttle Return Spring Mounting 3.45955 — BOLT, Mounting Bracket to Manifold (5/16—18 x 5/8”) 8.900S6 — NUT, Corb. to Manifold Vacuum Stud (5/16-18) 8.91657 — SWITCH, Thermostatic Vacuum 2.410S8 — MANIFOLD, Crossover Exh. Choke Coil Heat CRam Air & S.D.) 3.60959 — VALVE, Thermostatic Purge 3.130

GROUP a.ooo ILLUSTRATION 7

PARTS CATALOGUE1GM fl~I~1

t

LA

2 3

A

)

1967-69 O.H.C. 6.CVL. ENGINE — BLOCK &

GROUP 0-000 ILLUSTRATION 8

COMPONENTS

A

41C

0-4

~j~flR1PARTS CATALOGUE

1967-69 O.H.C. 6-CYL. ENGINE — BLOCK & COMPONENTS

KEY Part Name Group No.

— BLOCK, Cylinder (Inc. #2...7...49...50...55..57...65) 0.0332— PLUG, Cylinder Block Oil Gallery (3/8”) 0.0343 — PLUG, Cylinder Block Core Hole (1—15/16”) 0.0344 — GEAR, Flywheel Ring 0.6735 — FLYWHEEL ASSEMBLY — S.T. . 0.6666 — BOLT, Flywheel to Crankshaft (7/16:20; i5/16”) 0.6697 — PIN, Cylinder Black to Flywheel Housing Locating. 0.6858 — PLUG, Cylinder Block Drain (1/Be) 0.0349 — PLUG, Cylinder Block Water Jacket Side 0.034

10 — SEAL PKG., Crankshaft Rear Oil—Upper & Lower 0.13711 — BEARING PKG., Crankshaft Rear 0.10612 — BEARING, Crankshaft Clutch Pilot 0.09613 — CRANKSHAFTASSEMBLY 0A4614 — BEARING PKG., Crankshaft — Rear 0.09615 — BEARING PKG., Crankshaft — Rear Center 0.09616 — SEAL, Crankshaft Rear Brg. Cap Oil 0.13717 — CAP, Crankshaft Bearing . ... N.S.18 — BOLT, Flywheel to Crankshaft (7/16”:20x21/32”) 0.66919 — PLATE, Flywheel Bolt ta Crankshaft Bearing (4—1/2” OD. x 1/16”) . 0.66920 — FLYWHEELASSEMBLY- A.T 0.66621 — CLAMP, Oil Suction Pipe to Cylinder Black22 .— BOLT, Main Bearing Cap & Oil Suction Pipe (1/2”—13 x 3—5/8”— 1.656

3/8—16 x 1/2”) 0.05623 — BOLT, Suction Pipe Clamp to Block (5/16” —18 x 3/4’) 8.90024 — NUT, Bracket to Cap Bolt (3/8—16) 8.91525 — BRACKET, Oil Pump Suction Pipe 1.65626—PIPE&SCREENASM.,Oil PumpSuction 1,65627 — SEAL, Oil Suction Pipe to Cylinder Black 1.65528 — SCREW,Oil Pan Drain 1.45329 — GASKET, Oil Pan Drain Screw 1.45630—PAN, Oil 1.42631 — SCREW, Oil Pan to Cylinder Block (5/16”: m ~Vi¼&~b;; 1.42832 — GASKET, Oil Pan 1.42933 — BOLT, Crankshaft Bearing Cap (1/2”— 13 x 3—5/8”) 0.05634 — CAP, Crankshaft Main Bearing N.S.35 — BEARING PKG., Crankshaft — Front 0.09636 — BEARING PKG., Crankshaft — Front Center 0.09637 — BEARING PKG,, Crankshaft — Center 0.09638 — BEARING PKG., Crankshaft — Center 0.09639 — SCREW,Baffle to Cylinder Block (#8~32 x 3/8”) 8.97740 — BAFFLE, Crankcase Vent 1.78041 — KEY, Crankcase Sprocket 0.72942 — GASKET, Crankcase Front End Cover 0.20743 — COVER ASM., Crankcase Front End — W/SeaI 0.20644 — SEAL ASM., Crankcase Front End Cover 0.21345 — BEARING PKG., Connecting Rod 0.61646 — NUT, Connecting Rod Bolt (11/32” —24) 0.62647 — BOLT, Connecting Rod 0.62348 — RODASM., Connecting 0.60349 — PIN, Piston 0.63650 — PISTON & PIN ASSEMBLY 0.62951 — RING, Piston Oil 0.64352 — EXPANDER, Piston Oil Ring (P~rt of #51) N.S.53 — RING, Piston Compression — Lower 0.64354 — RING, Piston Compression — Upper 0.64355 — RING SETS, Piston 0.64356—SCREW,Cover to Block (5/16”—lSxl/2” W/Face) 1.42857 — PIN, Front Cover to Black (5/16” x 11/16”) 0.29358 — BRACE, Starter Motor 2.04159 — BAFFLE, Crankcase Oil Filler Tube 1.78060 — SCREEN, Oil Filler Tube Baffle 1.78061 — TUBE, Engine Oil Filler 1.74562 — CAP, Oil Filler 1.75863 — PLUG, Oil Filler Tube (1 5/16” O.D. Neoprene) 1.74564 — ROD, Oil Level Indicator 1.51665 — TUBE, Oil Level Indicator ... 1.51666 — SCREW, Baffle to Cylinder Block &8—32;3/8”V. 8.977


PARTS CATALOGUE1GM fl~flR1

1967-69 O.H.C. 6-CYL. ENGINE — HEAD & CAMSHAFT


j~T~IRflPARTS CATALOGUE

1967-69 O.H.C. 6-CYL. ENGINE — HEAD & CAMSHAFT


1 — BOLT, Camshaft Sprocket (1/2—20 x 1—5/8”) 8.9002 — WASHER, Camshaft Sprocket 0.7383 — SPROCKET, Camshaft (38 Teeth) 0.7364 — SEAL, Camshaft to Cover 0.3865 — CAMSHAFT, Engine 0.5196 — COVER,Valve Rocker Arm 0.3867 — STUD, Valve Rocker Arm Cover (5/16” -18-5/16—24 x 2-11/16”)

(Front — R.H.) 0.4138—WASHER,Valve Rocker Arm Cover 0.4139 — NUT, Rocker Arm Cover to Cylinder Head (5/l6Ii~18) 8.915

10 — STUD, Valve Rocker Arm Cover (5/16” —18—5/16—24x 3—11/16”)(Front — L.H.) 0.413

11 — CLIP, Wire Harness to Rocker Ann Cover N.S.12 — BOLT, Valve Rocker Arm Cover to Cylinder Head (5/16-18 x 3”) 8.90013 — ANCHOR,Throttle Control Return Spring (4 BBL.) 3.45914 — BOLT, Valve Racker Arm Cover to Cylinder Head (5/16-18 x 2”) 8.90015 — STUD, Valve Rocker Arm Cover (5/16”..18—5/16”—24 x 3—7/16”)

(Rear — RH.) 0.41316 — STUD, Valve Rocker Arm Cover (5/16”—18—5/16” x 24 x 2—7/16”)

(Rear — L.H.) 0.41317 — PLUG, Valve Rocker Arm Cover Camshaft Bare (2-1/2” Dia.) 0.38618 — BOLT, Camshaft — Rear 0.53319 — WASHER, Camshaft Retainer 0.53320 — WASHER,Camshaft Thrust 0.53321 — GASKET, Valve Rocker Ann Caver 0.42322 — LOCK, Valve Spring Cup 0.31023 — SEAL, Intake Valve Stem Oil 0.30824 — CUP, Engine Valve Spring Retainer 0.30925 — SHIELD, Valve Spring 0.30826 — SPRING, Valve — Outer (4 BBL.) 0.30327 — SPRING, Valve (with Damper) (1 BBL.) 0.30328 — SPRING, Valve - Inner (4 BBL.) 0.30329 — BOLT, Cylinder Head & Radio Graund (1/2”—13 x 5—3/8—24 x 11/16”).. 0.29330 — PLUG, Cylinder Block Oil Gallery (3/8”) 0.03431 — HEAD, Cylinder 0.26932—PLUG, Cylinder Head Water Jacket (15/16”) 0.03433 — STUD, Intake & Exhaust Manifold (3/8—16 x 24 — 1—13/16”) 3.27534 — VALVE, Exhaust 0.29735 — GASKET, Cylinder Head 0.2B936 — BOLT, Vacuum Pipe Clamp to Head (3/8—16 x 5/8”) 8.900

37 CLIP, Distributor Vacuum Pipe to Head N.S.38 — PIPE, Carb. to Distributor Vacuum (3/16” OD. x 24—3/4”) (1 BBL.) 8.964

PIPE, Carb. to Distributor Vacuum (3/16” x 23”) (4 BBL.) 8.96439 — VALVE, Intake 0.29640 — PLUG, Cylinder Head (3/8”) 0.03441 — SWITCH, Engine Water Thermogauge 1.15042 — PLUG, Cylinder Head Care Hold (1—15/16”) 0.03443 — PIN, Cylinder Head Locating Dowel (5/16” x 11/16”) 0.29344 — BOLT, Cylinder Head (1/2—13 x 5”) 0.29345 — ADJUSTERASM.. Valve Lash 0,45946 — VALVE, Plunger Metering N.S.47 — TUBE, Oil Pressure Reducer 1 .6o948 — SEAL, Intake Valve Guide 0.30849 — ARM, Valve Rocker 0.33350 — BOLT, Cylinder Head (1/2” —13x 5) 0.29351 — BOLT, Water Outlet Fitting to Rocker Arm Cover (3/8—16 x 1—5/8”)... 8.90052 —WASHER,Water Outlet Fitting to Rocker Arm Cover (13/32” ID. x 3/4”

O.D.) 8.92953 — FITTING, Water Outlet (Aluminum) 1.15354 — THERMOSTAT, Engine Water Temperature 1.24655 — CLIP, Rocker Arm Retainer 0.33356 — BOLT, Cylinder Head (1/2—13 ~ 3—13/1 6”) 0.29357—GASKET, Intake ManiFold Out 1.15458 — FITTING, Engine Water Recircu stion 1.15359 — CLAMP, Water Recirculation Hose (1/2’) N.S.60 — HOSE, Water Recircu lotion (9/32” ID. x 17—1/2”) 8.962


PARTS CATALOGUE

1967-69 O.H.C. 6-CYL. ENGINE — MANIFOLDS & CARBURETORS


3.

1GM fl~fluflPARTS CATALOGUE

1967-69 O.H.C. 6-CYL. ENGINE — MANIFOLDS & CARBURETORS

Group No. Key Part Name Group No.

1 — PIPE, Carb. to Diaph. Vacuum — 1 B.C2 — PIPE, Fuel Hose to Carb. — 1 B.C3 — CLAMP, Fuel Hose to Pipe4 — HOSE, Fuel Pump to Fuel Pipe5 — CLEANER& SILENCER, Carburetor Air6 — NUT, Air Cleaner to Carb. (1/4-20 Wing)7 — GASKET, Air Cleaner to Cat8 — STUD, Air Cleaner to Cat9 CARBURETOR ASM., i—Barrel

10 — NUT, Carb. to Manifold Stud (3/8—24)11 — ROD, Therm

0. Lever to Carb. Choke Lever — 4 B.C.12 — CLIP, Choke Rod to Carb. — 4 B.C13 — BOLT, Carb. to Manifold (5/16—18 x 1—1/4”) - -

14 — PLUG, Vacuum Hole or Fittings (1/8”)15 — CARBURETOR AS/A.,

4-Barrel16 — BOLT, Carb. to Manifold (5/16—18 x 3/4”)17 — DIAPHRAGM ASM., Throttle Return — Anti—Stall18 — CLIP, Fuel Hose to Corb. — A.T19 — BOLT, Extension to Carb. Lever (1/4—20 x 1/2”)20 — EXTENSION, Carb. Lever — 4 B.C. — A.T21 — CLIP, Fuel Hose to Corb. — S.T22 — NUT, Extension to Carb. Lever (l/4”—20)23 — HOSE, Carb. to Diaph. Vacuum24 — PIPE, Cat. to Diaph. Vacuum 4 B.C25 — HOSE, Fuel Pump to Fuel Pipe26 — PIPE, Fuel Hose to Carb. - 4 B.C27 — GASKET, Carb. to Manifold — 4 B.C28 — PIPE, Fuel Hose to Pump29 — SCREW,Theraso to Mfld. (1/4—20 x 5/16”)30 — THERMOSTAT ASM., Choke - 4 B.C31 — PLUG, Manifold Fitting (1/8”)32 — FITTING, Cark. to Dist. Vacuum Hose33 — HOSE, Carb. to Mfld. Vacuum34 — MANIFOLD, Intake — 4 B.C

35 — GASKET, Exhaust to Intake Manifold — 4 B.C. . . -

36 — BRACKET, Throttle Cant. Cable Mtg. — 1 B.C.37 — BRACKET, Throttle Cant. Cable Mtg. — 4 B.C.38 — BOLT, Bracket to Manifold (5/16—18 x 3/4”)39 — LOCKWASHER, Bracket to Manifold (5/164 -

40 — PLUG, Manifold Fitting (1/8”)41 — PLUG, Manifold Fitting (3/8” Sq. Headless)42 — FITTING, Trans. Vacuum Pipe43 — PLUG, Exhaust Manifold44 — SHAFT ASM., Exhaust Mfld. Valve — 1 B.C45 — SPRING, Mfld. Valve Anti—Rattle—Rear — 1 B.C.. -

46 — SPACER, Mfld. Heat Cant. Valve

47 — BUSHING, Mfld. Heat Cant. Valve48 — MANIFOLD, Exhaust

N.S.N .5.

3.1633.1633.4023.4033.4033.4033.7258.9 153.7523.7258.9003.2783.7253.2753.440N.S.

8.9003-454

N.S.8.9153.440N.S.

3.163N.S.

3.726N.S.

8.9773.7508.9713.2783.4403.2653.2703-4593.4598.9008.9318.97 18.9714.205N.S.N.S.

3.6413.6413.6463.601

49 — PIN, Heat Control Valve Anchor — I B.C50 — LOCK, Exhaust Manifold Bolt51 — BOLT, Exh. Mfld. to Int. Mfld. (3/8”-i6 x 7/8”).52 — VALVE, Manifold Heat Control — 4 B.C53 — BOLT, Brkt. to Intake MfId. (5/16-18 x 3/4”). -

54 — PAD, Heat Cant. Valve Stop - 4 B.C55 — BRACKET, Heat Cant. Valve Stop - 4 B.C56 — SHAFT ASM., Exhaust Mfld. Valve — 4 B.C57 — THERMOSTAT, MfId. Heat Cant. Valve — 4 B.C.. -

58 — SHIELD, Manifold Thermostat — 4 B.C59 — PIN, Heat Control Valve Anchor - 4 B.C60 — SPRING, Mfld. Valve Anti—Rattle — 4 B.C61 — SPRING, Mfld. Valve Anti—Rattle — 1 B.C62 — THERMOSTAT, Mfld. Heat Cant. Valve — I B.C..63 — BAFFLE, Exhaust Mfld. Thermostat — 1 B.C64 — VALVE, Manifold Heat Control — 1 B.C65 — GASKET, Exhaust to Intake Manifold — 1 B.C. . -

66 — STUD, Intake & Exhaust Manifold(3/8”—16x 1— 13/16”)

67 — MANIFOLD, Intake - I B.C68 — CLAMP, C/Case Vent Hose (5/16”)69 — HOSE, Crankcase Vent (5/16” I .D. i 29”)70—FITTING, C/Case Vent(1/4”x 1—1/2” Long)—1 B.C.71 — NIPPLE, Vent Hose to Block — 4 B.C72 — GASKET, Intake & Exhaust73 — WASHER, Manifold to Cylinder Head

(7/16” ID. x 1-1/4” OD. x 5/16”)74 — BOLT, Int. & Exh. Mfld. to Cyl. Head

(3/8—16 x 2—1/16”)75 — WASHER, Int. & Exh. MfId. to Cyl. Head

(7/16” l.D.x63/64” O.D.xS/16”)76 — NUT, Manifold to Head Stud (3/8—24)77 — WASHER, Int. & Exh. Mfld. to Cyl. Head

(7/16” l.D. x 63/64” OD. x 5/16”)78 — BOLT, Int. & Exh. Mfld. to Cyl. Head

(3/8”—16x 1-1/4”)79 — VALVE PKG., C/Case Vent80 — NUT, Exh. MfId. to Int. Mfld. (3/8”—24)81 — ELBOW, Crankcase Vent82 — STUD, Manifold to Carb. (3/8—16 x 1—13/32”)83 — BOLT, Bracket to Manifold (5/16—18 x 5/8”) . -

84 — GASKET, Carb. to Manifold — 1 B.C85 — FITTING, Dist. to Carb. Vacuum Pipe Hose86 — HOSE, Corb. to Diaphragm Vacuum87 — CLIP, Choke Rod to Cat. — I B.C88 — ROD, Thermo. Lever to Cat. Choke Lever —1 B.C..89 — THERMOSTAT ASM., Choke — 1 B.C90 — SCREW, Thermo, to Mfld. (1/4—20 x 3/8”)

Key Part Name

N.S.3.2758.900N.S.

8.9003.6473.641N.S.

3.6403.6413.6473.6413.6413.6403.641N.S.3.270

3.2753.265N.S.

1 .7621 .7451 .7453.270

3.275

3.288

N .S.8.915

N .5.

8.9001 .7458.9 151.745

3.2758.9003.7263.2783.4403.7253.7523.7508.977


PARTS CATALOGUE1GM flW~7RD

1967-69 O.H.C. 6.CYL. ENGINE — FRONT COVERS & WATER PUMP


j~TT~IRDPARTS CATALOGUE

1967-69 O.H.C. 6-CYL. ENGINE — FRONT COVERS& WATERPUMP


1—COVER, Timing Belt - Front Upper 0.206

2—BOLT, Front UpperTiming Cover Mounting Bracket (5/16” — 18x 5/8”). . 8.900

3—BRACKET, Timing Belt Cover Mounting — Front Upper 0.206

4—ELBOW, Water Recirculatian Hose to Pump 1.153

5—CLAMP, Water Recirculatian Hose (1/2”) 5.5.

6—HOSE, Water Recirculation (9/32” I.D. x 17—1/2”) 1.159

7—BELT, Timing 0.724

8.—COVER, Timing Belt — Rear Upper 0.206

9—RETAINER, Timing Belt Front to Rear Cover 0.206

10—STUD, Water Pump to Cylinder Block (5/16” x 1—1/4’) 1.073

11—COVER, Timing Belt — Rear Lower 0.206

12—STUD, Water Pump to Cylinder Block (5/16” x 1 ..7/51i) 1.073

13—GASKET, Water Pump to Cylinder Block 1.079

14—DELCOTRON ASM 2.275

15—PLATE, Alternator Bracket ExtensAon 2.277

16—BOLT, Extension Plate to Bracket (3/8” — 16 x 1) 8.900

17—BOLT, Alternator to Bracket & Plate (3/8” — 16 x 5~1/2) 8.900

18—STRAP, Alternator Belt Adjusting 2.317

19—WASHER, Adjusting Strap to Alternator (11/32” l.D. x 3/4” O.D.x 3/32”) 2.317

20—BOLT, Alternator to Adjusting Strap (5/16” - 18 x 1”) 8.900

2IBOLT, Strap & Front Cover to Block (5/16 — 18 x 3/4’) 8.900

22—SPROCKET, Crankshaft (19 Teeth) 0.728

23—FLANGE, Crankshaft Sprocket 0.729

24-COVER, Timing Belt — Front Lower 0.206

25—BALANCER, Hannonic 0.659

26—WASHER, Balancer to Crankshaft (21/32” l.D. x 1—9/16” O.D.) 0.662

27—BOLT, Balancer to Crankshaft (5/8” — 18 x 1—5/8”) 0.662

28—BOLT, Front Lower Cover to Block (5/16” — 18 x 1—3/4”) 8.900

29—WASHER, Front Lower Cover to Block (11/32” l.D. x 11/16” O.D.) . . . 8.929

30—BOLT, Fan to Water Pump Hub (5/16” — 24 x 5/8”) 8.900

31—FAN, Engine 1.064

32—BEARING & SHAFT, Water Pump 1.105

33—NUT, Water Pump to Block (5/16” — 24) 8.915

34—PULLEY, Water Pump & Fan 1.062

35—HUB, Water Pump & Fan 1.062

36—PUMP ASM., Water - W/Gasket 1.069

37--BOLT, Camshaft Sprocket (1/2’ — 20 x 1—5/8”) 8.900

38—WASHER, Camshaft Sprocket 0.738

39—SPROCKET, Camshaft (38 Teeth) 0.736

40—SCREW, Timing Belt Front Upper Cover & Bracket (5/16” — 24) 0.206


[~MFIREBIRDPARTS CATALOGUE

1967-69 O.H.C. 6-CVL. ENGINE — OISTRIBUTOR, OIL PUMP, OIL

FILTER & FUEL PUMP HOUSING


IGM FIREBIRDPARTS CATALOGUE

1967-69 O.H.C. 6-CVL. ENGINE — DISTRIBUTOR, OIL PUMP, OIL

FILTER & FUEL PUMPHOUSING


— WIRES PKG., Spark Plug & Coil2 — RETAINER, Spark Plug Wires (For 4 Wires)3 — PLUG, Spark4 — COIL ASM., Ignition5 — BOLT, Coil to Cylinder Black (3 8—16 x 1 2”)6 — CLAMP, Distributor Hold Dawn7 — GASKET, Distributor to Pump Housing8 — STUD, Distributor Clamp9 — SEAL, Drive Gear Hole Plug (1st Type)

10 — PLUG, Oil Pomp & Drive Housing Shaft Hole (Nylon—Red) (7,8” Dia.)(1st Type)

11 — RETAINER, Tachometer Drive Gear Hole (lst Type)12 — SCREW, Retainer to Housing (1 4—20 x 5 8’) (1st Type)13 — CAP, Oil Pressure Regulator Valve14 — GASKET, Oil Pressure Regulator Valve Cap15 — SPRING, Oil Pressure Valve16 — VALVE, Oil Pressure Regulator17 — SEAT, Oil Filter By—Pass Valve18 — GEAR & ECCENTRIC, Dist., Oil & Fuel Pump19 — PIN, Gear & Eccentric (3/16” x 7/8”)20 — SCREW, Retainer to Housing (~8—32 x 5/16’)21 — GASKET, Oil Pump to Block — Rear22 — RETAINER, Oil Filter By—Pass Valve23 — SPRING, Oil Filter By—Pass Valve24 — GASKET, O~l Pump to Block — Front25 — PIN, Housing Locating Dowel26 — GEAR & SHAFT PKG., Oil Pump Drive27 — BOLT, Oil Pump Cover to Housing (5/16—18 x 7/8”)28 — COVER, Oil Pump Body29 — GASKET, Oil Pump Cover30 — GEAR, O~l Pump Driven (Part of p26)31 — SHAFT, Oil Pump Driven Gear32 — HOUSING AS/A., Oil Pump & Drive (w Bearing & Seal)33 — INSERT, Oil Filter34 — ELEMENT PKG., Oil Filter35 — SHAFT & SPROCKET AS/A., Dist. Oil & Fuel Pump Drive36 — COVER & BRACKET ASM., Timing Selt — RH. — Rear Lower37 — WASHER, Oil Pump Housing to Block (11/32” x 3 4” x 1/8”)38 — BOLT, Housing Asm. to Cyl. Block (5 16—18 x 2”)39 — WASHER, Fuel Pump to Housing (Rubber Centered)40 — BOLT, Fuel Pump to Housing (5 16—18 x 1—1 8”)41 — SEAL ASM., Dist., Oil & Fuel Pump Drive Shaft42 — BEARING AS/A., Dist., Oil & Fuel Pump Drive Shaft43 — SWITCH ASM., Engine Oil Pressure44 — GASKET, Fuel Pump45 — PUMP ASM., Fuel — Package46 — CLAMP, Fuel Hose to Pump47 — HOSE, Pump to Fuel Line48 — HOSE, Pump to Carburetor Pipe (5, 16” x 1—5/8”)49 — PIPE, Fuel Pump to Carb. (5/16”)50 — NUT, Distributor Clamp (3 8”— 16)

51 — DISTRIBUTOR, Ignition52 — HOSE, Distributor to Vacuum53 — PIPE, Carb. to Distributor Vacuum54 — PLUG, Oil Pump & Drive Housing Shaft Hole (

2na Type) (15<16” Die.)

2.2392.2512.2702.1708.9002.3632.3632.363

1 .639

1 .6391 .6398.977

•l.609.1.609

- . . ul.609.1.609.1.837.3.935u8.939• 8.977

1.655- - .1.837- . •1.544

1.655(A.) N.S.

.1.639

.8.900

.1.723

.1.724- . . .1.639

(a .)1 .639~AI)1.653(a.) N.S.

1.836. 1.639

0.2061.7238.900-3.9018.900

(a .)I .639(a .)1 .639

1.800

3.9043.900

N.S.N.S.

3.163N.S.

8.9 152.3612.420N.S.

1 .639

NOTE: PARTS INDICATED BY THIS SYMBOL (Al ARE PART OF HOUSING ASM. 11.653)NOTE: PARTS INDICATED BY THIS SYMBOL (in) ARE PART OF DRIVE HSG. ASM. (1.6521


I~ FIREBIRD IPARTS CATALOGUE

Key Description Group

1 Piston and Pin Assembly2 Bearing Unit, Connecting Rod3 Control, Distributor Vacuum4 Nut, Connecting Rod Bolt5 Bolt—(Standard Stack)—5=

6-lBxl”6 Bolt—IStandard Stock)—Ks.18xlVs”7 Pump Assembly, Water8 Gasket, Water Pump ..

9 Bolt, Lack Washer and Seal Assy., Push Rod Cover10 Bearing, Camshaft—#1 and #4 Locations11 Bearing, Camshaft—#2 and #3 Locations12 Bearing, Camshaft Thrust13 bott—(Standard Stack)~V*.20x!¾14 Gear or Sprocket, Camshaft15 Key, Woadruff—(Standord Stock)16 Gear or Sprocket, Crankshaft17 Balancer Assembly, Harmonic18 Crankshaft Assembly19 Bearing Unit, Cronkstsaft—# 1-2-3-4.5-6 Locations20 Bolt, Crankcase Front End Cover to Front Plate—

(Standard Stack)21 Cap, Crankshaft Bearing—# 1-2.3-4.5-6 Locatians22 Pump Assembly, Oil23 Cover Assembly, Crankcase Front End24 Seal Assembly, Crankcase Front End Cover Oil25 Gasket, Crankcase Front End Cover

0.6290.6162.4100.6268.9008.9001.0691.0790.4460.5390.5390.5338.9000.7368.9600.72 80.6590.6460.096

8.9000.0951.6520.206D.2 130.207


26 Bc-It—(Standard Stock)—Ks- 1 Bx?’g”27 Scseer Assembly, Oil Pump Suctia28 Pan, Oil29 Gasket, Oil Pan Drain Plug30 Screw. Oil Pan Drain31 Screw and Lockwasher, Oil Pan32 Gasket Unit Oil Pan33 Bolt, Crankshaft Bearing Cap34 Cop, Crankshaft Bearing—#7 Location35 Seal, Crankshaft Rear Bearing’ Oil36 Bearing Unit, Crankshaft—#7 Location37 Flywheel Assembly38 Bolt, Flywheel39 Camshaft Assembly40 Cover, Push Rod41 Plug, Camshaft Rear Bearing42 PIug—(Standard Stock)—%”43 Gasket, Push Rod Cover44 Block Assembly, Cylinder (Complete or Fitted)45 Gasket, Ignition Timer Distributor46 Lifter Assembly, Hydraulic Valve47 Clamp, Ignition Timer Distributor48 BoIt—(Stondard Stack)—%- 1 6xPg”49 Distributor, Ignition Timer50 Rod Assembly, Cnnnecting51 Ring Unit Piston

1970-75 BLOCK — 6 CYL. 250 ENGINE

9.9001.6561.4261.4561.4531.4281.4290.0560.0950.1370.0960.6660.6690.5190.4390.5538.9710.4430.0332.3630.4592.3638.9002.361

0.6030.643


PARTS CATALOGUE1GM FIREBIRD I

0— “Iii

Key Description Group Key Description Group

1 Cover, Valve Rocker2 Gasket, Valve Rocker Cover3 Plug, Spark4 Arm, Valve Racker5 Ball and Nut Unit, Valve Rocker Arm6 Seal, Valve Stem Oil ...

7 Key, Valve StemB Cap. Valve Spring9 Shield, Valve Stem Oil

10 Spring, Valve11 Stud, Valve Rocker Arm Ball12 Plug—(Stondard Stock)13 BaIt—(Standard Stock)14 Lockwasher (Standard Stock)15 Fitting Engine Water16 Gasket, Water Outlet17 Thermostat, Motor18 Housing, Thermostat19 Gasket, Thermostat Housina

0.3860.4232.2700.3330.4290.3080.3 100.3090.3080.3030.4293.9718.9008.93 11.1531.1541,2461.25 11.252

20 Head, Cylinder21 Gasket, Spark Plug22 Stud, Intake Manifold—Carburetor to Manifold23 Valve, Intake24 Valve, Exhaust25 Rod, Valve Push26 Bolt, Exhaust Manifold Clamp—(Standard Stock)27 Clamp, Manifold28 Gasket, Manifold—Between Intake and Exhaust29 Nut, Inlet & Exhaust Manifold Stud—(Standard Stack)30 Stud, Manifold—Exhaust Flange to Manifold31 Ring Exhaust Pipe32 Stud, Manitald—Intake to Exhaust33 Manifold, Exhaust34 Gasket Manifold—Intake and Exhaust to Black35 Stud, Inlet and Exhaust Clamp36 Manifold, Intake37 Gasket, Cylinder Head38 Bolt, Cylinder Head

tA,0

1970-75 HEAD AND MANIFOLDS — 6 CYL. 250 ENGINE

0.2692.27 13.2980.2960.2970.4263.9003.2733.2708.9003.2753.6 113.2753.6013.2703.2753.2650.2890.29?


PARTS CATALOGUE

1976 6-CYL. 250 ENGINE HEAD, MANIFOLD & RELATED PARTS(WITH INTEGRAL CYL. HEAD & MANIFOLD)


j~TThflIRDPARTS CATALOGUE

1976 6-CYL. 250 ENGINE HEAD, MANIFOLD & RELATED PARTS(With Intregal Cyl. Head & Manifold)

Key Description

1 COVER ASM., Valve Rocker Arm2 BOLT, Valve Rocker Arm Cover (Fj5-18 x 5~)

3 CAP, Oil Filter4 REINFORCEMENT, Valve Rocker Arm Cover Bolt5 STUD, Valve Rocker Arm Cover6 GASKET, Valve Rocker Arm Cover7 CLIP, Spark Control Pipe8 GROMMET, Vent Hose Connector9 KEY, Valve Stem

10 CAP, Valve Spring11 SHIELD, Valve Spring Oil12 SPRING, Valve13 BOLT, Cylinder Head (%-16 x 4t4)14 TUBE, Throttle Bore15 STUD, Exhaust Manifold16 BOLT, Exhaust Manifold End (~~-16 x 2t4)17 BOLT, Engine Lifting Brkt. (Xt-l

4 x 1)18 LOCKWASHER (3ft)i9 LOCK, Exhaust Manifold End Bolt20 BRACKET, Engine Lifting — Rear21 WASHER, Exhaust Manifold (23=4 x 34 x 3=3)22 HEAD ASM., Cylinder23 SWITCH, Metal Temperature/Engine Unit!24 GASKET, Exhaust Manifold25 MANIFOLD, Exhaust26 BOLT, Exhaust Manifold (34-16 x27 THERMOSTAT, Manifold Heat Control Valve26 NUT (3=~-24)

Group

0.3868.9001.7560.4130.3860.4232.4201.7450.3100.3090.3060.3038.9003.6803.6133.2756.9008.9313.613

N.S.3.2750.2691.1503.2703.60 13.2753.6406.915


29 LOCKWASHER (3=~)30 STUD, Exhaust Manifold Heat Valve31 VALVE, Exhaust32 VALVE, Intake33 GASKET, Cylinder Head34 SWITCH, Oil Pressure35 SWITCH ASM., Water Temperature!

Transmission Control Spark36 GASKET, Thermostat Housing37 GASKET, E.G.R. Value38 VALVE, E.G.R. Emission39 BOLT, E.G.R. Valve Mtg. %-18 x Ye)40 LOCK, E.G.R. Value Bolt41 BOLT, Thermostat Housing (34-16 x 1)42 HOUSING, Thermostat43 THERMOSTAT, Cylinder Head Water Outlet44 GASKET, Water Outlet45 OUTLET, Water46 VALVE, E.G.R, Vacuum Control47 BRACKET, Engine Lifting — Front48 BOLT, Cylinder Head (t

3..13 x 333=4)49 BOLT, Cylinder Head (t3..13 x 434)50 PLUG, Spark .51 ROD, Valve Push52 STUD, Valve Push Rod Adjusting53 ARM, Valve Rocker54 BALL, Valve Rocker Arm55 NUT, Valve Push Rod Adjusting

8.9313.6800.2970.2960.2691.800

1.1501.2523.6723.6708.9003.6608.9001.25 11.2461.1541.1533.670

N.S.0.2930.2932.2700.4260.4290.3330.4290.429


PARTS CATALOGUE

FIREBIRD

1976 6-CYL. 250 ENGINE BLOCK & RELATED PARTS

flantia 0.000 ILLUSTRATION 22

PARTS CATALOGUEI~M~IRD1976 6-CYL. 250 ENGINE BLOCK & RELATED PARTS

Key Description

1 GEAR, Camshaft2 BEARING PKG., Camshaft Thrust3 KEY, Camshaft Qft x 3//4)

4 BEARING, CamshaftS CAMSHAFT, Engine6 LIFTER ASM., Valve7 BOLT, Camshaft Gear (3=-20x8 SCREW, Bearing to Block (>20 x ~2)

9 FAN, Engine10 ELEMENT PKG., Oil Filter11 CONNECTOR, Oil Filter12 PUMP PKG., Fuel13 GASKET, Fuel Pump

14 BOLT & SEAL ASM., Valve Cover (5~t-1a x 3=t)

15 HARNESS ASM., Spark Plug Wire16 DISTRIBUTOR, Ignition H.E.I.17 GASKET, Distributor18 BOLT, Distributor Clamp (%-16 x 1)19 CLAMP, Distributor ...

20 COVER, Coil

21 ROD, Oil Level Indicator22 TUBE, Oil Level Indicator Rod23 BEARING PKG., Connecting Rod24 PIN, Piston

25 RING PKG., Piston26 PISTON ASM., Engine (IncI. #24)27 BOLT, Connecting Rod28 ROD ASM., Engine Connecting29 COIL ASM., Ignition30 BOLT & SEAL ASM., Push Rod Cover31 NUT, Connecting Rod Bolt

32 COVER, Valve Push Rod

33 SWITCH, Engine Oil Pressure34 GASKET, Push Rod Cover35 BOLT, Brace to Starter (3=~-18x 3=)36 BRACE, Starter Motor37 MOTOR ASM., Starter38 BOLT, Starter to Block39 PLUG, Water Jacket — Rear (2 OD)40 PLUG, Camshaft Bearing Hole41 BOLT, Housing to Block (~~-16 x it

4)

42 HOUSING, Clutch

43 COVER, Clutch Housing

44 SCREW, Cover to Housing (t4..gO x !=~)45 FITTING, Vacuum

46 PLUG, Water Jacket Side (1%)47 BLOCK ASM., Engine Cylinder46 NOZZLE, Timing Gear Oil (B22)49 VALVE, Oil Filter By-Pass50 PLUG, Oil Gallery & Tappet Gallery Passage51 GASKET, Water Pump

Group

0.7360.5338.9600.5460.5190.4598.9068.9771.0641.8361.8553.9003.9040.4462.2392.36 12.3638.9002.363

2.1831.5161.516

0.616N.S.S.0.643

0.6290.6230.6032.1700.443

0.6260.4391.8000.4438.9772.042

2.041

2.0420.0340.5538.9000.6630.6796.9773.2780.0340.0330.7481.8371.53 11.079

Key

52535455565758596061626364

6566676869707172737475767778798081

8283848586878889

90919293949596979899

100101

Description0UMP ASM., WaterEIOLT, Pump to Block (Nr18 x 3=)BOLT, Pump to Block (Kt-18 x it

2)

FULLEY, Water Pump & FanSPACER, Engine FanNIPPLE, By-Pass HoseBEARING, Distributor Shaft PilotSCREW, Cover to Block (3=-20x Kt)BOLT, Balancer to Crank (Nt-

20 x 3=t)

LOCKWASHER, Balancer to Crank (Kt Ext.)WASHER, Harmonic BalancerBALANCER ASM., HarmonicKEY, Harmonic Balancer (9=tx 3=)SEAL ASM., Engine Front Cover OilCOVER ASM., Engine Front EndGASKET, Front End CoverGEAR, CrankshaftKEY, Crankshaft Gear % x 3=)BEARING PKG., CrankshaftBEARING PKG., Crankshaft. #7 LocationSEAL, Crankshaft Rear OilBOLT, Cover to BlockBEARING, Clutch ReleaseCOVER & PRESSURE PLATE ASM., ClutchSTUD, Clutch Release Fork BallSPRING, Clutch Fork RetainingFLYWHEEL, Engine (AT.)BOLT, Flywheel to Crank (=r2Ox 1) (AT.)LOCKWASHER, Flywheel to Crank (Kt Ext.)FORK, ClutchPLATE ASM., Clutch DrivenFLYWHEEL, Engine (MT.)CAP, Crankshaft Rear Bearing — #7

BOLT, Crankshaft Bearing CapNUT, Support Oil Pump SuctionSTUD, Bearing CapPIPE, Screen & Support, Oil Pump SuctionGASKET PKG., Oil PanSEAL, Oil Pan — RearGASKET PKG., Oil PanSCREW, Oil Pan DrainGASKET, Oil Pan Drain PlugPAN, OilBOLT & LOCKWASHER, Oil Pan to BlockSEAL, Oil Pan — FrontBOLT, Pump to Block (3=6-18x 3=)PUMP ASM., Oil

CAP, Crankshaft BearingBEARING PKG., CrankshaftCRANKSHAFT, Engine

Group

1.0698.9008.9001.062

1.0648.866

2.375

0.2068.900

8.9320.6620.6598.960

0.2130.2060.2070.7288.960

0.0960.106

0.137

N.S.

0.7990.8590.796

0.796

0.666

0.669

8.932

0.795

0.886

0.666

0.095

0.056

N.S.

0.056

1.656

1.429

1.4291.4291.4531.4561.426

1.4281.4298.900

1.6520.096

0.0960.646


PARTS CATALOGUE1GM VThflIRn1

CLUTCH AND FLYWHEEL


— BEARING, Crankshaft Clutch Pilot

2 — GEAR, Flywheel Ring

3 — FLYWHEEL, Engine

4 — BOLT, Flywheel to Crankshaft

5 — PLATE ASSY, Clutch Driven

6 — COVER ASSY, Clutch Pressure Plate

7 — LOCKWASHER, Clutch Cover to Flywheel—(3/8”)

8 — BOLT, Clutch Cover to Flywheel

9 — BEARING, Clutch Release

10 — FORK ASSY, Clutch Release

11 — BALL, Clutch Release Fork

12 — BOLT, Clutch Fork Ball


10

0.649

0.673

0.666

0.669

0.886

0.859

8.931

0.862

0.799

0.795

0.796

8.900

PARTS CATALOGUEIGM FIREBIRD I

Group No. Key Part Name

1 — RETAINER, Clutch Pedal2 — BUSHING, Clutch Pedal

Shaft — Nylon3 — BRACKET, Clutch and Brake Pedal4 — CLIP, Clutch Pedal Rods5 — PEDAL ASM., Clutch6 — COVER, Clutch Pedal Pad7 — SEAT, Clutch Lever Shaft Ball Stud8 — FORKASM., Clutch9 — STUD, Clutch Lever Shaft Ball

10 — SPRING, Clutch Lever Shaft BallStud Seat Retainer

11 — EXTENSION, Clutch Fork Pull BackSpring (8—Cyl.)

12— SEAL, Clutch Control Countershaft13 — WASHER, Countershaft to Frame

Bracket14 — BRACKET, Clutch Lever and Shaft15 — NUT, Countershoft to Frame (3/B”—Th)16 — SCREW, Lever and Shaft Bracket to Frame

(5/16—18 x 1 1/8”)17 — BRACKET, Clutek Pork Return Spring18 — SPRING, Clutch Fork Pull Back

0.8314.6340.7930.8304.6300.851-0.795

-0.851

0.837 19 — SCREW, Brake Pipe & Bracket to Frame(#10—16 x 1/2”)

20 — ROD, Clutch Fork Adjusting Push (8—Cyl.) .

21 — EXTENSION, Clutch Fork Pull BackSpring (6—Cyl.)

22 — LEVER & SHAFT ASM., Clutch23 — ROD, Clutch Fork Push (6—Cyl.)24 — NUT, Clutch Fork Adjusting Rod

Push (3/A”—16)25 — ROD, Clutch Fork Adjusting PusF

(6—Cyl.)0.851 26 — SWIVEL, Clutch Fork Push Rod

(8—Cyl.)0.846 27 — FITTING, Cauntershaft Grease (1/8”)0.851 28 — STUD ASM., Clutch Lever Shaft

Ball to EngineN.S. 29 — SEAT, Clutch Lever Shaft Ball Stud

0.852 30 — WASHER, Push Rod to LeverB.915 31 — ROD, Clutch ?edat ?~tsh

32 — SCREW, Push Rod Dash Seal Retainer8.977 (#8...18 x 3/8”)0.852 33 — SEAL ASM., Clutch Pedal Push Rod Dash

0.844 34 — BUMPER, Clutch Pedal

Key

1967-09 CLUTCH LINKAGE

Part Name Group No.

8.9770.787

0.8460.8520.787

9.916

0.787

0.7878.984

0.8520.851N.S.

0.%54

8.9770.82?0.829


Key Port Name

PARTS CATALOGUE

Group No. Key— BOLT, Clutch & Brake Pedal Pivot

(7/16—14 x 4 1/2”)

2 — SWITCH ASM., Trans. Neutralizer

3 — SPACER, Clutch Pedal

4 — PEDAL ASM., Clutch

5 — BUSHING, Brake Pedal Shaft

6 — BRACKET, Trans. Neutralizer Switch

7— NUT, Clutch & Brake Pedal Pivot Bolt (7/16—14).

8 — BUMPER, Clutch Pedal

9 — WASHER, Neutralizer Switch Brkt. to Pedal Brkt.(9/32” l.D.)

10 — SCREW, Neutralizer Switch Brkr. to Pedal Brkr.

(1/4—14 x 3/4”)

11 — ROD, Clutch Pedal Push

12 — WASHER,Clutch & Brake Pedal Pivot (1/2” I.D.)

13 RETAINER, Clutch Pedal Rods

14 — SEAL ASM., Pedal Push Rod Dash

15 — NUT, Clutch Lever Shaft Ball Stud to Frame (3/8 “—16)

16 — WASHER, Clutch Lever Shaft Ball Stud to Frame—Lock (3/8” l.D.) 8.932

17— BOLT, Lever & Shaft Brkt. to Frame (5/16—18 x 3/4”) 8.977

Part Name

18 — BRACKET, Clutch Lever & Shaft0.833

19 — SEAL, Clutch Cant. Counter Shaft4.054

20 — RETAINER, Clutch Lever Shaft Ball Stud Seat.0.83 1

21 — SEAT, Clutch Lever Shaft Ball Stud0.830

22 — STUD, Clutch Lever Shoft Ball4.626

23 — LEVER & SHAFT ASM., Clutch Control4.054

24 — BRACKET, Clutch Fork Ret. Spring8.9 15

25 — SPRING, Clutch Fork Push Rod0.8 29

26 — FORK, Clutch Release

8.929 27 — ROD, Clutch Fork Push

28 — NUT, Swivel & Rod to Countershaft8.977

29 — ROD, Clutch Fork Push0.854

30 — STUD, Clutch Lever Shaft Ball to Engine8.929

31 — SWIVEL, Clutch Lock Push Rod0.793

32 — SPACER, Clutch Fork Adj. Push Rod0.6 29

33 — FITTING, Countershaft Grease8.9 15

34 — COVER, Clutch Pedal Rod

35 — ROD, Clutch Fork Push

36 — SPRING, Clutch Fork Push Rod37 — EXTENSION, Return Spring (Cal. Shift)

1970-75 CLUTCH LINKAGEGroup No.

0.852

0.85 1

0.85 1

0.85 1

0.85 1

0.852

0.846

0.844

0.795

0.767

8.915

0.767

0.65 1

0.787

4.0 12

8.984

4.630

0.787

0.8440.846


PARTS CATALOGUE


1 BRACKET, Brake2 NUT, Brake Pedal Pivot (Kr14)3 BUSHING, Brake Pedal4 RETAINER, Clutch Control Rods (11A)5 SPACER, Clutch Pedal6 WASHER, Brake Pivot Bolt (3=g ID)7 BOLT, Brake Pivot (Kr14 x 4%)6 PAD, Clutch9 PEDAL ASSEMBLY, Clutch

10 SWITCHASSEMBLY, TransmissionNeutral Safety

11 SCREW, Transmission Neutral Safety (3=-14 x 3=)12 WASHER, TransmIssion Neutral Safety (3=3 ID)13 BRACKET, Neutral Safety Switch14 WASHER, Clutch Pedal Push Rod15 BUSHING, Clutch Pedal Push Rod16 BUMPER, Clutch Pedal17 SEAL ASSEMBLY, Clutch Pedal Push Rod18 SCREW, Seal (#8-18 x 3=)19 SEAT, Clutch Lever Shaft Ball Stud (2)20 STUD, Clutch Lever Shaft Ball Ito Frame!21 SPRING, Clutch Lever Shaft Ball Stud Seat

Retainer22 SEAL, Clutch Control Countershaft23 WASHER,Lever & Shaft Bracket (3= ID)

4.6466.9154.626

8.g340.8528.9296.9004.6300.830

4.0548.9778.9294.0548.9290.854

0.8290.829

8.9770.6510.851

0.85 10.8518.932


24 NUT, Lever & Shaft Bracket (3=-16)25 BRACKET, Clutch Lever & Shaft26 BOLT, Lever & Shaft Bracket27 POE) Clutch Fork Adjustor Push28 NUT, Clutch Fork Adjuster Push29 ROD, Clutch Fork Push30 ROD, Clutch Fork Adjuster Pus31 SWIVEL, Clutch Fork Push Rod32 BEARING, Clutch Release33 STUD, Clutch Fork Ball34 SPRING, Clutch Fork Push Rod Pull Back35 BRACKET, Clutch Fork Retaining Spring36 SCREW, Clutch Fork Retaining Spring

Bracket (3=s-12x 5/i)

37 FORK ASSEMBLY, Clutch38 BOOT, Clutch Fork39 CLIP, Clutch Fork Pedal Rod40 SPACER, Clutch Fork Adjusting Push Rod41 FITTING, Lever & Shaft Assembly/Grease/42 SEAL, Clutch Control Countershatt/Felt/54-13=OD43 STUD ASSEMBLY, Clutch Lever Shaft Ball

!to Engine!44 LEVER & SHAFT ASSEMBLY, Clutch45 ROD, Clutch Pedal Push46 PLATE, Clutch Pedal

1976 CLUTCH LINKAGE

8.9150.8528.9770.7878.9160.7870.7870.7870.7990.7960.8440.846

6.9770.7950.7970.7930.7938.9840.851

0.8520.8520.8544.630


PARTS CATALOGUE1~mr7~IRr1

6-CYL. A.T.

1967-69 ENGINE & TRANSMISSION MOUNTING

GROUP0.000 ILLUSTRATION 28

PARTS CATALOGUE1GM r;n1ri

1967-69 FIREBIRD ENGINE & TRANSMISSION MOUNTING


1 — BRACKET, Engine Front Support to Frame — (6 Cyl.) 0.029

2 — BOLT, Engine Frt. Support Brkt. to Frame (3/8—16 x 1 1/6”) 8.900

LOCKWASHER, Engine Frt. Support Brkt. to Frame (3/8” Med.) 8.931

3 — BOLT, Engine Frt. Mtg. Insul. to C1A. Block (7/16—14 x 1 3/4”) 8.900

4 — SPACER, Engine Frt. Mtg. Insul. to Cyl. Block (F/6 4 B.C. — S.T.) . . . . 0.002

S — BOLT, Engine Frt. Insul. to Cyl. Block (7/16—14 x 1” —300 M) 0.002

6 — WASHER, Engine Frt. Insul. to Cyl. Block 0.U02

7 — INSULATOR ASM., Engine Front — (6 Cyl.) 0.027

8 — BRACE, Eng. Front Support Brkt. to Frame — (6 Cyl.) 0.029

9 — NUT, Frame Brace to Lower Control Arm (1/2—13 — 301 M) 6.917

10 — NUT, Eng. Frt. Support Brkt. to Frame (3/8—16 — 286 M) 8.915

11 — LOCKWASHER, Eng. Frt. Mtg. Insul. to Supt. Brkt 0.002

12 — LOCKWASHER, Eng. Frt. Mtg. Insul. to Supt. Brkt. (1/2” Heavy) 8.931

13 — BOLT, Eng. Frt. Mtg. Insul. to Supt. Brkt. (1/2—20 x 1 1/8”) 0.002

14— CROSSMEMBER, Trans Rear Support 7.011

15 — BRACKET, Eng. Front Supt. to Frame — (8 Cyl.) 0.029

16 — INSULATOR ASM., Engine Front — (8 Cyl.) 0.027

17 — BRACE, Eng. Front Supt. Brkt. to Frame — (8 Cyl.) 0.029

18 — BOLT, Eng. Front Mtg. Insul. to Cyl. Block — (8 Cyl.) 0.002

19 — BRACE, Starter Motor 2.041

20—NUT, Trans. Support Mtg. (3/8—16) 8.915

21 — LOCKWASHER, Trans. Support Mtg. (3/8” Med.) 8.93 1

22 — WASHER, Trans. Support Mtg. (13/32” l.D. x 3/4” O.D.) 8.929

23 — BOLT, Trans. Support Mtg. (3/8—16 x 1” —280 M) 8.900

24 — BOLT, Drive Line Damper Mtg. Adap. to Trans. Ext. (3/8—16 x 2 3/4”—280M)8.900

25 — LOCKWASHER, Drive Line Damper Mtg. Adap. to Trans. Ext. (3/8” Med.) 8.931

26 — ADAPTER, Drive Line Damper Mtg. (6 Cyl. - A.T.) 4.08 1

27 — MOUNTINGASM., Transmission 4.081

28 — LOCKWASHER,Trans. Support Mtg. (7/16” Heavy) 8.931

29 — BOLT, Trans. Supt. Mtg. Asm. to Adopter (7/16—14 x 1 1/8” — 280 M) - . 8.900

30 — RETAINER, Drive Line Damper (6 Cyl.) 4.086

31 — WEIGHT, Drive Line Damper (6 Cyl.) 4.081

32 — BOLT, Drive Line Damper Weight to Mtg. Asns. (7/16”—14x 1 5/8—28CM) 8.900

33 — NUT, Trans. Supt. Mtg. Atm. to Adapter (7/16” — 14) 8.91S

34 — ADAPTER, Drive Line Damper Mtg. (6 Cyl. — S.T.) 4.081

35 — BOLT, Trans. Supt. Mtg. Asm. to Adapter (7/16—14 x I” — 280 M) . . . . 8.900

36 — MOUNTINGASM., Transmission Support 4.081

37 — WASHER, Trans. Support Mtg. (3/8” ID. x 15/32” O.D. x 11/64) N.S.


PARTS CATALOGUE


1 — BRACKET, Engine Frt. Mtg. Frame — R.H2 — BOLT, Engine Frt. Support Brkt. to Frame (3/6” —56x 1” — 280M)3 — BRACKET, Engine Mtg. — StopA — NUT, Engine Frt. Mtg. Asm. (7/16—14 Hex. — 286M)S — WASHER, Engine Frt. Mtg. Atm. (7/16” l.D. x 7/8” O.D. x 1/16”)6 — SCREW & WASHER ASM., Engine Bracket to Cyl. Block (3/8”—16 x 3/4”)..7 — SPACER, Engine Frt. Mtg. Brkt8 — BRACKET ASM., EngIne Frt. Mtg. — R.H9 — INSULATOR ASM., Engine Frt Mtg

10 — NUT, Eng. Rear Support Insul. Ret, to Frame (3/8” —16Hex. — 286M)11 — LOCKWASHER,Eng. Rear Support to Side Supt. (3/B”)12 — BOLT, Eng. Frt. Mtg. Atm. (7/16”—14 x 4” Hex. hd. — 300M)13 — WASHER, Eng. Rear Support to Side Supt. (3/8” 1.0. x 3/4” O.D. x 1/16”).14 — MOUNTING ASM., Trans. Supt15 — LOCKWASHER, Trans. Supt. to Trans. (7/16” heavy)16 — BOLT, Eng. Rear Supt. to Mtg. Atm. (7/16”—14 x 1” Hex. hd. 280M) ...

17 — SUPPORT ASM., Trans18 — WASHER, Eng. Rear Supt. to Mtg. Airs. (7/17” I.D. x 1 3/8” 0.0. x 3/16”).19 — WASHER, Frt. Mtg. Frame Brkt. to Crass Member (3/8” l.D. x 1” O.D. x 1/8”)20 — BRACKET, Eng. Frt. Supt. R.H21 — INSULATOR ASM., Eng. Frt. Mtg. R.H22 —WASHER, Insul. to Cyl. Block Mtg. Bolt (7/16” 1.0. x 13/16” O.D. x 1/8”)23 — BOLT, Insul. to Cyl. Block Mtg. 7/16”—14x 1” Hex. hd.)24 — BOLT, Eng. Frt. Mtg. lnsul. to Supt. Brkt. (7/16—14 x 4 7/8” Hex — 28GM).25 — RETAINER, Eng. Rear Crosernember to Frame Insul26 — INSULATOR, Eng. Rear Crossmember Frame27 — MEMBER, Eng. Rear Cross . ~......\.

28 — BOLT, Eng. Frt. Irsiul. to Cyl. Block (7/16”—14x 1 1/8” Hex hcL 3COM).29 — BRACE, Starter Motor30 — WASHER, Frt. Supt. Brkt. to Crossmember (3/8” l.D. x 3/4” O.D. x 1/16’)

6-CYLINDER S-CYLINDER

1970-76 ENGINE AND TRANSMISSION MOUNTING

0.0298.9000.0298.9158.9298.9000.0020.0290.0278.9158.9318.9008.9294.0818.9318.9004.081

8.9298.9290.0290.0278.9298.9000.0027.0114.0817.0118.9002.0418.929


group 0.000 engine clutch

Documents