general catalog labthink

8/19/2019 General Catalog LABTHINK

1/12

Classic Series Classic + Big Data

OX2/231 i-Oxtra 7600

OX2/230 i-Oxtra 7700

VAC-V1 N/A

VAC-V2 i-Gastra 7100

VAC-V3 N/A

VAC-VBS N/A

Gas Permeability Tester

This tester is used to measure gas (O2, N2 or CO2) transmission

rate as well as solubility coefficient, diffusion coefficient, and

permeability coefficient of flexible films. It is advaced with 6 test

cells, which are in two groups with different accuracy.

ISO15105-1, ISO 2556, ASTM

D1434,

JIS K7126-1

ISO 15105-1, ISO 2556, ASTM

D1434,

JIS K7126-1


This tester is based on differntial pressure method and used to

measure gas permeability of plastic films, sheeting, paper, foils

and etc. This equipment can test 3 specimens with average

results in one operation.

ISO15105-1, ISO 2556, ASTM

D1434, JIS K7126-1


This equipment is based on differential pressure method and

used to measure Gas (O2, N2 or CO2) transmission rate as well

as solubility coefficient, diffusion coefficient and permeability

coefficient of flexible materials. It is equipped with 3 test cells for

different specimens with independent results.

Product Name & DescriptionStandards To Follow

ISO 15105-1, ISO 2556, ASTM

D1434, JIS K7126-1


VAC-V1 is based on the differential pressure method and can be

used to measure gas transmission rate as well as solubility

coefficient, diffusion coefficient and permeability coefficient of

flexible films. It can test O2, N2 and CO2.

ISO 15105-2, ASTM D3985,

ASTM F2622, ASTM F1307,

ASTM F1927, JIS K7126-2

ISO 15105-2, ASTM D3985,


ASTM F1927, JIS K7126-2

Oxygen Transmission Rate Test System

This system is based on the coulometric sensor method and

available for the OTR test of flexible films, sheets, foils and

packages. It can test 3 specimens in one operation withindependent results.

Oxygen Permeability Tester

This tester utilizes the coulometric sensor method to test the

oxygen transmission rate of flexible films, sheets, foils and

packages. It can test 3 specimens in one operation with average

results.

GENERAL CATALOG

http://192.168.7.250:8095/zh-cn/product/1010600.htmlhttp://192.168.7.250:8095/zh-cn/product/1010700.htmlhttp://192.168.7.250:8095/zh-cn/product/1010700.htmlhttp://192.168.7.250:8095/zh-cn/product/1010600.html


2/12

DM2/330 N/A

BTY-B2P N/A

G2/130 N/A

OR2/411 i-Orgamate 7810

G2/110 i-Sepamate 7800

G2/131 i-Gastra 7210

G2/132 i-Gastra 7200


G2/132 is designed to measure gas permeability as well as

solubility coefficient, diffusion coefficient and permeability

coefficient of flexible films. It is adopts Labthink patent design and

can test 3 specimens with average results in one operation.

ISO 2556, ISO 15105-1, ASTM

D1434,

JIS K7126-1

Separation Membrane Permeability Analyzer

G2/110 is designed for the quantitative and qualitative analysis of

gas permeability to separation membrane.

N/A


G2/131 is based on differential pressure method to measure gas

permeability of plastic films, sheeting, paper and etc. It is adopts

Labthink patent design and can test 3 specimens with

independent results.

ISO 2556, ISO 15105-1, ASTM

D1434,

JIS K7126-1

Container Gas Permeability Tester

G2/130 is based on differential pressure method, and can be

used to measure gas transmission rate of flexible containers,

including various bottles of carbonated drinks, juice, tea and

packages of edible oil, dairy products, washing supplies and

metal containers.

N/A

Organic Gas Permeability Analyzer

OR2/411 is professionally desinged to provides quantitative and

qualitative analysis of organic gas permeability of various filmsand sheeting materials.

N/A


This is an advanced gas permeability tester. The equipment is

based differential and equal pressure method and conforms to

various international standards.

ISO 15105-1, ISO 15105-2, ISO

2556, ASTM D3985, ASTM F2622,


ASTM D1434


This Gas Permeability Tester is specially designed for battery

separators. It can have 3 equivalent specimens tested

simultaneously with average test results.

ISO 5636, SJT 1071.9

http://192.168.7.250:8095/zh-cn/product/1011200.htmlhttp://192.168.7.250:8095/zh-cn/product/1011500.htmlhttp://192.168.7.250:8095/zh-cn/product/1012700.htmlhttp://192.168.7.250:8095/zh-cn/product/1011400.htmlhttp://192.168.7.250:8095/zh-cn/product/i-orgamate-7810.htmlhttp://192.168.7.250:8095/zh-cn/product/1013100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-sepamate-7800.htmlhttp://192.168.7.250:8095/zh-cn/product/1012800.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gastra-7210.htmlhttp://192.168.7.250:8095/zh-cn/product/1012900.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gastra-7200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gastra-7200.htmlhttp://192.168.7.250:8095/zh-cn/product/1012900.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gastra-7210.htmlhttp://192.168.7.250:8095/zh-cn/product/1012800.htmlhttp://192.168.7.250:8095/zh-cn/product/i-sepamate-7800.htmlhttp://192.168.7.250:8095/zh-cn/product/1013100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-orgamate-7810.htmlhttp://192.168.7.250:8095/zh-cn/product/1011400.htmlhttp://192.168.7.250:8095/zh-cn/product/1012700.htmlhttp://192.168.7.250:8095/zh-cn/product/1011500.htmlhttp://192.168.7.250:8095/zh-cn/product/1011200.html


3/12

MGT-01 i-Gasmate 7820

W3/330 i-Hydro 7500

W3/230 i-Hydro 7900

W3/030 i-Hydro 7300

W3/031 i-Hydro 7310

W3/130 i-Hydro 7400

W3/060 i-Hydro 7320

Water Vapor Transmission Rate Tester

This Tester is based on the humidity sensor method, are

designed to measure the WVTR of flexible films, sheets, foils and

etc. It has 3 test cups, which can test independently.

ISO 15106-1, ASTM E398, TAPPI

T523, JIS K7129

Water Vapor Transmission Rate Test System

This test system is based on the gravimetric method to determine

the WVTR of flexible films, sheets and foils. It is advaced with 6

test cups for 6 different specimens.

ISO 2528, ASTM E96, ASTM

D1653, TAPPI T464, DIN

53122-1, JIS Z0208


This tester is based on gravimetric method (cup method) and can

be used to determine WVTR of flexible films, sheets, foils and

etc. It is equipped with 3 test cups for accurate test.


D1653, TAPPI T464, DIN 53122-

1, JIS Z0208


This tester is based on the gravimetric method and available for

the WVTR test of flexible films, sheets and foils. It is equipped

with 3 test cups and can test 3 specimens independently.


D1653, TAPPI T464, DIN 53122-

1, JIS Z0208


This test system is based on the electrolytic sensor method,

which are available for the WVTR test of flexible films, sheets,

foils and packages. This equipment adopts Labtink patent design

and can test 3 specimens with independent results.

ISO 15106-3, DIN 53122-2


This test system utilizes the infrared sensor method to test the

WVTR of flexible films, sheets, foils and packages. It can test 3

specimens with independent results.

ISO 15106-2, ASTM F1249,

TAPPI T557, JIS K7129

Mixed Gas Permeability Analyzer

This tester is designed for the quantitative and qualitative analysis

of gas permeability of mixed gases.

N/A

http://192.168.7.250:8095/zh-cn/product/1013200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gasmate-7820.htmlhttp://192.168.7.250:8095/zh-cn/product/1010200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7500.htmlhttp://192.168.7.250:8095/zh-cn/product/1010300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7900.htmlhttp://192.168.7.250:8095/zh-cn/product/1010800.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7300.htmlhttp://192.168.7.250:8095/zh-cn/product/1011600.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7310.htmlhttp://192.168.7.250:8095/zh-cn/product/1011700.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7400.htmlhttp://192.168.7.250:8095/zh-cn/product/1010900.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7320.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7320.htmlhttp://192.168.7.250:8095/zh-cn/product/1010900.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7400.htmlhttp://192.168.7.250:8095/zh-cn/product/1011700.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7310.htmlhttp://192.168.7.250:8095/zh-cn/product/1011600.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7300.htmlhttp://192.168.7.250:8095/zh-cn/product/1010800.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7900.htmlhttp://192.168.7.250:8095/zh-cn/product/1010300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-hydro-7500.htmlhttp://192.168.7.250:8095/zh-cn/product/1010200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gasmate-7820.htmlhttp://192.168.7.250:8095/zh-cn/product/1013200.html


4/12

W3/0120 N/A

TSY-W3 N/A

XLW(B) N/A

XLW N/A

XLW(M) i-Strentek 1200

XLW(PC) N/A

XLW(EC) i-Strentek 1100

Auto Tensile Tester

This tensile tester is newly designed with features of bidirectional

movement for tensile and compression test. It is also be used for

open force for bottle caps, puncture test, peeling test and etc with

high accuracy (better than 0.5%)

ISO 37, ASTM E4, ASTM D882,

ASTM D1938, ASTM D3330,

ASTM F88,

ASTM F904, JIS P8113

Auto Tensile Tester

This tester is professionaly designed for flexible materials

physical properties test. It is designed according to various

international standards and can be used for tensile strength,

elongation, peeling, seal strength test and etc.



ASTM F88,


Auto Tensile Tester

XLW(PC) is professional designed for tensile strength, elongation

test, peeling test and other physical properties test for flexible

materials with high accuracy (0.5%) and extra-long stroke.



ASTM F88,


Auto Tensile Tester XLW(B) Tensile Tester is a basic type to measure physical force

of plastic films, textiles, adhesive tapes and etc. It can be used for

tensile strength and elongation, peeling force, seal strength test

and so on.

GB/T 4850-2002, GB8808, GB/T1040.3-2006, GB/T17200,

GB/T2790, GB/T2791, GB/T2792,

QB/T2358

Auto Tensile Tester

XLW is professional designed for tensile strength, elongation test

for plastic films, sheeting materials. This equipment can also be

used for peeling, seal strength, tearing test for extention.



ASTM F88,



W3/0120 is based on the gravimetric method, which is available

for water vapor transmission rate test of flexible films and sheets.

It is advaced with 12 test cups for different specimens.


D1653, TAPPI T464, DIN 53122-

1, JIS Z0208

Water Vapor Permeability Tester

This equipment utilizes electrolytic detection method. It is a basic

type and designed for WVTR test of flexible films, sheets and

foils.

ISO 15106-3, DIN 53122-2

http://192.168.7.250:8095/zh-cn/product/1011000.htmlhttp://192.168.7.250:8095/zh-cn/product/1012500.htmlhttp://192.168.7.250:8095/zh-cn/product/1020400.htmlhttp://192.168.7.250:8095/zh-cn/product/1020100.htmlhttp://192.168.7.250:8095/zh-cn/product/1020300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-strentek-1200.htmlhttp://192.168.7.250:8095/zh-cn/product/1020200.htmlhttp://192.168.7.250:8095/zh-cn/product/1020201.htmlhttp://192.168.7.250:8095/zh-cn/product/i-strentek-1100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-strentek-1100.htmlhttp://192.168.7.250:8095/zh-cn/product/1020201.htmlhttp://192.168.7.250:8095/zh-cn/product/1020200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-strentek-1200.htmlhttp://192.168.7.250:8095/zh-cn/product/1020300.htmlhttp://192.168.7.250:8095/zh-cn/product/1020100.htmlhttp://192.168.7.250:8095/zh-cn/product/1020400.htmlhttp://192.168.7.250:8095/zh-cn/product/1012500.htmlhttp://192.168.7.250:8095/zh-cn/product/1011000.html


5/12

XLW(G6) N/A

MED-01 i-Meditek 1300

BLD-200N N/A

NLW-20 N/A

XYD-15K N/A

N/A i-Boxtek 1700

ERT-01 i-Resitest 8100

Box Compression Tester

i-Boxtek 1700 is newly designed for the determination of

compressive resistance, deformation and stacking capability of

cartons and beehive crates.

ASTM D4169, ASTM D642, TAPPI

T804,

ISO 12048, JIS Z0212

GBT 5009.60-2003, GB/T

5009.64-2003, GB/T 5009.68-

2003, GB/T 5009.69-2008, GB/T

5009.203-2003, and GB/T 9740-

2008

Evaporation Residue Constant Weight Tester

This tester is professionally designed for the precise mass

determination of dissolved substances of samples.

Adhesive Tensile & Shear Tester

NLW-20 is professionally applicable to the determination of

tensile, shearing, and pulling properties of various adhesives.

ISO 4587, ASTM D1002, ASTM

D2095, ASTM D3165, ASTM

D2339,

JIS K6850, JIS K6849

Box Compression Tester

XYD-15K is designed for measurement of compressing

resistance, shape change and stacking capability of cartons,

beehive crates, and other packages.

ISO 12048, ASTM D642,

ASTM D4169,TAPPI T804, JIS

Z0212

Medical Packaging Tester

This tester is professionally applicable to the determination of

force properties of various medical packaging materials, with high

precision (better than 0.5% of full scale) and multiple test ranges.



ASTM F88,


Auto Stripping Tester

BLD-200N can be used for peeling and stripping tests of

adhesives, protective films, release paper, laminated films,

leatheroid, woven bags, films and paper.

GB/T4850-2002, GB8808,

GB/T1040.3-2006, GB/T 17200,

GB/T 2790, GB/T 2791, GB/T

2792, QB/T 2358

Auto Tensile Tester

XLW(G6) is used to measure tensile strength and elongation rate

of flexible materials. This instrument is equipped with 6 test

stations can measure 6 spciements in one time.



ASTM F88,


http://192.168.7.250:8095/zh-cn/product/1020500.htmlhttp://192.168.7.250:8095/zh-cn/product/1022000.htmlhttp://192.168.7.250:8095/zh-cn/product/i-meditek-1300.htmlhttp://192.168.7.250:8095/zh-cn/product/1020600.htmlhttp://192.168.7.250:8095/zh-cn/product/1020900.htmlhttp://192.168.7.250:8095/zh-cn/product/1020700.htmlhttp://192.168.7.250:8095/zh-cn/product/1014000.htmlhttp://192.168.7.250:8095/zh-cn/product/i-resitest-8100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-resitest-8100.htmlhttp://192.168.7.250:8095/zh-cn/product/1014000.htmlhttp://192.168.7.250:8095/zh-cn/product/1020700.htmlhttp://192.168.7.250:8095/zh-cn/product/1020900.htmlhttp://192.168.7.250:8095/zh-cn/product/1020600.htmlhttp://192.168.7.250:8095/zh-cn/product/i-meditek-1300.htmlhttp://192.168.7.250:8095/zh-cn/product/1022000.htmlhttp://192.168.7.250:8095/zh-cn/product/1020500.html


6/12

NJY-20 N/A

HST-H3 N/A

HST-H6 N/A

GHS-03 N/A

HTT-L1 i-Thermotek 2500

PSST-100 N/A

MXD-01 N/A

GB 10006Coefficient of Friction Tester

MXD-01 is designed to measure static and kinetic coefficients of

friction of plastic films, sheeting, textiles and other materials,

according to GB 10006.

Hot Tack Tester

This tester is used to determine hot tack property test for plastic

films, laminated films and other packaging films. Meanwhile, it is

also used for peel, shear, tension and other test items for

adhesives and laminated films.

ASTM F2029, ASTM F1291

QB/T 2358Portable Heat Seal Strength Tester

PSST-100 is a portable heat seal strength tester for plastic films,

composite films and other materials. This instrument is suitable

for on-site quantitative inspection.

Heat Seal Tester

HST-H6 is designed to measure seal temperature, seal pressure

and seal time of flexible films. This is a basic type with one

sealing jaw.

ASTM F2029

ASTM F2029

Gradient Heat Seal Tester

GHS-03 is designed for the determination of heatsealability of

plastic films, composite films, coated paper, and other sealing

films under certain sealing speed, pressure and 5 differenttemperatures.

Digital Torque Tester

NJY-20 is an manual torque tester to measure open force and

closure force of the caps of bottles, suction and flexible tube

packages.


ASTM D3474

Heat Seal Tester

HST-H3 is used to seal specimen for further determination of seal

temperature, pressure and time of plastic films. It is equipped with

up and low sealing draws.

ASTM F2029

http://192.168.7.250:8095/zh-cn/product/1021000.htmlhttp://192.168.7.250:8095/zh-cn/product/1030200.htmlhttp://192.168.7.250:8095/zh-cn/product/1030400.htmlhttp://192.168.7.250:8095/zh-cn/product/1030900.htmlhttp://192.168.7.250:8095/zh-cn/product/1030700.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thermotek-2500.htmlhttp://192.168.7.250:8095/zh-cn/product/1030800.htmlhttp://192.168.7.250:8095/zh-cn/product/1040100.htmlhttp://192.168.7.250:8095/zh-cn/product/1040100.htmlhttp://192.168.7.250:8095/zh-cn/product/1030800.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thermotek-2500.htmlhttp://192.168.7.250:8095/zh-cn/product/1030700.htmlhttp://192.168.7.250:8095/zh-cn/product/1030900.htmlhttp://192.168.7.250:8095/zh-cn/product/1030400.htmlhttp://192.168.7.250:8095/zh-cn/product/1030200.htmlhttp://192.168.7.250:8095/zh-cn/product/1021000.html


7/12

MXD-01A N/A

MXD-02 i-Coftek 3300

COF-P01 N/A

FPT-F1 i-Coftek 3500

CHY-C2A N/A

CHY-CA i-Thickness 4400

CHY-CB i-Thickness 4100

ISO 4593, ISO 534, ISO 3034,

ASTM D374, ASTM D1777, TAPPI T411, JIS

K6250,

JIS K6783, JIS Z1702

Thickness Tester

This Thickness Tester is designed with automatic specimen

feeding feature, which is used for thickness test of specimens

within 12mm.

ISO 4593, ISO 534, ISO 3034,

ASTM D374,

ASTM D1777, TAPPI T411, JIS

K6250,


Thickness Tester

This thickness tester is designed to precisely measure thickness

of plastic films, sheeting, paper and other materials within 12mm.

Test results include maximum, minimum and average value.

ISO 8295, ISO 8510-2, ASTM

D1894,


TAPPI T816,

TAPPI T549

Friction & Peel Tester

This is designed for the friction coefficient test of films as well as

peel strength test of adhesives.

ISO 4593, ISO 534, ISO 3034,

ASTM D374,


K6250,


Thickness Tester

This thickness tester is based on the contacting method, is

available for the thickness test of specimens with LCD display.

ISO 8295, ASTM D1894, TAPPI

T816

Coefficient of Friction Tester

This is used to precisely determine static and kinetic coefficient of

friction of plastic films, paper and paperboard, rubber, textiles with

high accuracy (0.5 of FS).

ASTM D202, ASTM D4918, TAPPI

T815

Inclined Surface Coefficient of Friction Tester

COF-P01 is used to measure the static coefficient of friction on a

inclined surface of paper, cardboard, plastic films, sheets, and

conveyor belt and etc.

ASTM D1894Coefficient of Friction Tester

MXD-01A is used to measure static and kinetic coefficients of

friction of plastic films, paper, rubber, textiles and non-wovens,

according to ASTM D1894.

http://192.168.7.250:8095/zh-cn/product/1040200.htmlhttp://192.168.7.250:8095/zh-cn/product/1040300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-coftek-3300.htmlhttp://192.168.7.250:8095/zh-cn/product/1040400.htmlhttp://192.168.7.250:8095/zh-cn/product/1040500.htmlhttp://192.168.7.250:8095/zh-cn/product/i-coftek-3500.htmlhttp://192.168.7.250:8095/zh-cn/product/1050200.htmlhttp://192.168.7.250:8095/zh-cn/product/1050300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thickness-4400.htmlhttp://192.168.7.250:8095/zh-cn/product/1050400.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thickness-4100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thickness-4100.htmlhttp://192.168.7.250:8095/zh-cn/product/1050400.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thickness-4400.htmlhttp://192.168.7.250:8095/zh-cn/product/1050300.htmlhttp://192.168.7.250:8095/zh-cn/product/1050200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-coftek-3500.htmlhttp://192.168.7.250:8095/zh-cn/product/1040500.htmlhttp://192.168.7.250:8095/zh-cn/product/1040400.htmlhttp://192.168.7.250:8095/zh-cn/product/i-coftek-3300.htmlhttp://192.168.7.250:8095/zh-cn/product/1040300.htmlhttp://192.168.7.250:8095/zh-cn/product/1040200.html


8/12

SLY-S1 i-Lacera 5500

BMC-B1 N/A

FDI-01 i-Freefall 5100

FIT-01 i-Pendum 5200

RSY-R2 N/A

FST-02 i-Thermotek 2710

MFY-01 N/A

ASTM D3078Leak Tester

MFY-01 is designed for gross leak test of packages for food,

drugs, medical instruments, daily chemical products, cars,

electronic components, stationeries and other industrial products.

ASTM D2732Film Free Shrink Tester

This tester is designed for the heat shrinkage test and size

stability test of films in liquid medium at various temperatures.

ISO 14616, DIN 53369Film Thermal Shrinkage Tester

This tester is based on ISO 14616 and designed for

determination of shrinking force, contracting force and shrinkage

ratio of heat-shrinkable films.

ISO 7765-1, ASTM D1709, JIS

K7124-1

Falling Dart Impact Tester

This tester is designed to measure impact resistance property of

plastic films, sheeting, paper and foils. It is based on free falling

dart method and equipped wtih LCD display.

ASTM D3420, NF T54-116Pendulum Impact Tester

This tester is professionally designed for plastic films to measure

impact resistance property by pendulum method.

ISO 6383-1-1983, ISO 6383-2-

1983,

ISO 1974, ASTM D1922, ASTM

D1424,

ASTM D689, TAPPI T414

Tear Tester

This is based on Elmendorf method to measure tearing strength

of plastic films, foils, textiles and non-woven materials.

ISO 7765-1, ASTM D1709, JIS

K7124-1

Falling Dart Impact Tester

This is designed to measure impact resistance property of plastic

films, paper and other packaging materials using free falling dart

method.

http://192.168.7.250:8095/zh-cn/product/1060100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-lacera-5500.htmlhttp://192.168.7.250:8095/zh-cn/product/1070100.htmlhttp://192.168.7.250:8095/zh-cn/product/1070102.htmlhttp://192.168.7.250:8095/zh-cn/product/i-freefall-5100.htmlhttp://192.168.7.250:8095/zh-cn/product/1070200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-pendum-5200.htmlhttp://192.168.7.250:8095/zh-cn/product/1080200.htmlhttp://192.168.7.250:8095/zh-cn/product/1080300.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thermotek-2710.htmlhttp://192.168.7.250:8095/zh-cn/product/1090100.htmlhttp://192.168.7.250:8095/zh-cn/product/1090100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-thermotek-2710.htmlhttp://192.168.7.250:8095/zh-cn/product/1080300.htmlhttp://192.168.7.250:8095/zh-cn/product/1080200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-pendum-5200.htmlhttp://192.168.7.250:8095/zh-cn/product/1070200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-freefall-5100.htmlhttp://192.168.7.250:8095/zh-cn/product/1070102.htmlhttp://192.168.7.250:8095/zh-cn/product/1070100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-lacera-5500.htmlhttp://192.168.7.250:8095/zh-cn/product/1060100.html


9/12

LSSD-01 i-Leaktek 6600

HGA-02 N/A

HGA-03 i-Gasatek 6900

RGT-01 i-Vacupack 6100

FDT-02 i-Flexdura 9100

CZY-G N/A

CZY-6S N/A

JIS Z0237, GB/T 4852Primary Adhesive Tester

CZY-G utilizes rolling ball method to measure the primary

adhesive property of adhesives.

ASTM D3654, JIS Z0237Lasting Adhesive Tester

CZY-6S can be used to measure the durable adhesion of

pressure-sensitive adhesives.

N/AVacuum Packaging Analyzer

This analyzer provide the quantitative analysis of seal

performance and residual oxygen for vacuum packages.

ASTM F392Flex Durability Tester

This tester can simulate the kneading and creasing behaviors of

films happened during production, processing and transportation,

by which the flex durability of samples can be determined.

N/AHeadspace Gas Analyzer

HGA-02 can provide accurate and fast evaluation of the volumes

and proportions of O2 and CO2 in sealed packages.

N/APackage Headspace Analyzer

This analyzer provides accurate and fast evaluation of the

volumes and proportions of O2 and CO2 in sealed packages on

production lines, at warehouses or in laboratories.

ISO 11607, ASTM F1140, ASTM

F2054

Leak and Seal Strength Tester

This tester is used to measure leak and seal strength of

packages. It can be used to conduct burst, creep and creep to

failure test.

http://192.168.7.250:8095/zh-cn/product/1090200.htmlhttp://192.168.7.250:8095/zh-cn/product/i-leaktek-6600.htmlhttp://192.168.7.250:8095/zh-cn/product/1090400.htmlhttp://192.168.7.250:8095/zh-cn/product/1090500.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gasatek-6900.htmlhttp://192.168.7.250:8095/zh-cn/product/1090600.htmlhttp://192.168.7.250:8095/zh-cn/product/i-vacupack-6100.htmlhttp://192.168.7.250:8095/zh-cn/product/1100100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-flexdura-9100.htmlhttp://192.168.7.250:8095/zh-cn/product/1110100.htmlhttp://192.168.7.250:8095/zh-cn/product/1110300.htmlhttp://192.168.7.250:8095/zh-cn/product/1110300.htmlhttp://192.168.7.250:8095/zh-cn/product/1110100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-flexdura-9100.htmlhttp://192.168.7.250:8095/zh-cn/product/1100100.htmlhttp://192.168.7.250:8095/zh-cn/product/i-vacupack-6100.htmlhttp://192.168.7.250:8095/zh-cn/product/1090600.htmlhttp://192.168.7.250:8095/zh-cn/product/i-gasatek-6900.htmlhttp://192.168.7.250:8095/zh-cn/product/1090500.htmlhttp://192.168.7.250:8095/zh-cn/product/1090400.htmlhttp://192.168.7.250:8095/zh-cn/product/i-leaktek-6600.htmlhttp://192.168.7.250:8095/zh-cn/product/1090200.html


10/12

SBG-80 N/A

SPS-80T N/A

MCJ-01A N/A

RT-01 N/A

YGJ-02 N/A

BLJ-02 N/A

GC-6890 N/A

N/AGas Chromatograph

GC-6890 is used to measure residual solvent, smell analysis, and

solvent purity for packaging industry or other related industries.

JIS C2107, JIS Z0237, GB/T 7707Adhesive Tape Roller

YGJ-02 is kind of sample preparing device, working with BLJ-02

to test ink fastness.

JIS C2107, JIS Z0237, GB/T 7707Disk Stripping Tester

BLJ-02 is professionally used to test ink fastness of plastic films

and printed materials.

GB/T 7706Rub Tester

MCJ-01A is used to measure abrasion resistance of surface

layers of printed materials.

ASTM D5264, TAPPI T830Ink Rub Tester

RT-01 is professionally applicable to the abrasion resistance test

of surface coating layers of printed materials, e.g. ink layer or

photosensitive (PS) coating.

D65/A Standard Light Source

SBG-80 D65/A is equipped with double light source and is

available for the color evaluation and comparison.

N/A

N/ADouble Light Source Viewer

SPS-80T is designed for the all-day color evaluation and

comparison.

http://192.168.7.250:8095/zh-cn/product/1120100.htmlhttp://192.168.7.250:8095/zh-cn/product/1120200.htmlhttp://192.168.7.250:8095/zh-cn/product/1130100.htmlhttp://192.168.7.250:8095/zh-cn/product/1130200.htmlhttp://192.168.7.250:8095/zh-cn/product/1130300.htmlhttp://192.168.7.250:8095/zh-cn/product/1130400.htmlhttp://192.168.7.250:8095/zh-cn/product/1140300.htmlhttp://192.168.7.250:8095/zh-cn/product/1140300.htmlhttp://192.168.7.250:8095/zh-cn/product/1130400.htmlhttp://192.168.7.250:8095/zh-cn/product/1130300.htmlhttp://192.168.7.250:8095/zh-cn/product/1130200.htmlhttp://192.168.7.250:8095/zh-cn/product/1130100.htmlhttp://192.168.7.250:8095/zh-cn/product/1120200.htmlhttp://192.168.7.250:8095/zh-cn/product/1120100.html


11/12

GC-7800 N/A

GC-7800 N/A

FT-F1 N/A

TQD-G1 N/A

N/A i-Process 6200

N/A i-Process 6610

N/A i-Process 6910

ISO 11607, ASTM F1140, ASTM

F2054

Leak & Seal Test and Data Processing System

i-Process 6610 is professionally used for the on-site

measurement of seal strength, seal quality, bursting pressure,

compression resistance and leakage of flexible packages, aseptic

packages and many others.

N/AHeadspace Gas Test and Data Processing System

i-Process 6910 is professionally used to test the volume and

proportion of O2 and CO2 left in sealed packages.

ISO 9237, ISO 4638, ISO 5636,


P8117

Air Permeability Tester

TQD-G1 is professionally applicable to the determination of air

permeability of decorating materials used in cars, e.g.

polyurethane, expanded plastics, PVC, leather, textiles, non-

woven and other materials.

ASTM D3078Leak Test and Data Processing System

i-Process 6200 is professionally designed for the on-site leakage

test of packages used for food, pharmaceuticals and other

industries.

N/A

Gas Chromatograph with Autosampler

GC-7800 with autosampler is designed for gas chromatographic

analysis and control of testing organizations, research institutions,

packaging companies as well as food and pharmaceutical

industries.

ISO 6452, DIN 75201, SAE J1756,

QB/T 2728, BS EN 14288, PV

3920, PV 3015, ES-X83231, NES

M0161, D45 1727, GM 9305P,

TSM 0503G

Fogging Tester

FT-F1 is professionally applicable to the fogging characteristics

evaluation of volatile constituents of decorating materials used in

cars and aircrafts at high temperature conditions.

N/AGas Chromatograph

GC-7800 is widely used to test the relative indexes of various

materials, gases, smell, residue, and cigarette packages,

because of its powerful functions and high sensitivity.

http://192.168.7.250:8095/zh-cn/product/1140400.htmlhttp://192.168.7.250:8095/zh-cn/product/1140402.htmlhttp://192.168.7.250:8095/zh-cn/product/1810100.htmlhttp://192.168.7.250:8095/zh-cn/product/1810200.htmlhttp://192.168.7.250:8095/zh-cn/product/1903000.htmlhttp://192.168.7.250:8095/zh-cn/product/1904000.htmlhttp://192.168.7.250:8095/zh-cn/product/1905000.htmlhttp://192.168.7.250:8095/zh-cn/product/1905000.htmlhttp://192.168.7.250:8095/zh-cn/product/1904000.htmlhttp://192.168.7.250:8095/zh-cn/product/1903000.htmlhttp://192.168.7.250:8095/zh-cn/product/1810200.htmlhttp://192.168.7.250:8095/zh-cn/product/1810100.htmlhttp://192.168.7.250:8095/zh-cn/product/1140402.htmlhttp://192.168.7.250:8095/zh-cn/product/1140400.html


12/12

N/A i-Process 9200

N/A i-Process 1600

N/AVolume & Weight Analyzer Test and Data Processing System

i-Process 9200 is professionally used to test weight and volume

of packaging bags and bottles.

Torque Test and Data Processing System

i-Process 1600 is professionally designed for the on-site torque

value determination of caps used in bottles, spout pouches and

flexible tube packages.


ASTM D3474

For any information or quotations, please feelfree to contact our local representative:
http://192.168.7.250:8095/zh-cn/product/1906000.htmlhttp://192.168.7.250:8095/zh-cn/product/1901000.htmlhttp://192.168.7.250:8095/zh-cn/product/1901000.htmlhttp://192.168.7.250:8095/zh-cn/product/1906000.html

general catalog labthink

Documents