fundamental of optical engineering lecture 3. aberration happens when the rays do not converge to a...
TRANSCRIPT
![Page 1: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/1.jpg)
ENE 492Fundamental of Optical Engineering
Lecture 3
![Page 2: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/2.jpg)
Aberration happens when the rays do not converge to a point where it should be. We may distinguish the aberrations into 6 categories:
◦ Spherical aberration◦ Coma◦ Oblique astigmatism◦ Curvature of field◦ Distortion◦ Chromatic aberration
Lens Aberrations
![Page 3: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/3.jpg)
Rays near axis come to focus at a different distance than marginal rays.
In other words, rays that pass through a lens further away from the optical axis come to a focus closer to the lens than paraxial rays.
Spherical Aberration
![Page 4: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/4.jpg)
Spherical Aberration
![Page 5: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/5.jpg)
This spherical aberration can not be completely corrected with a simple lens.
Complete elimination of this aberration can be done by using a compound lens.
Spherical Aberration
![Page 6: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/6.jpg)
This happens due to various wavelengths in light rays.
The index of refraction varies as a function of wavelength.
A single lens has different focal lengths for different colors.
Chromatic Aberration
![Page 7: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/7.jpg)
Chromatic aberration can be corrected by using two lenses in contact, one made of crown and the other of flint.
Chromatic Aberration
![Page 8: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/8.jpg)
A plane mirror reflects the light without focusing it.
The virtual image formed by a plane mirror is located at the same distance behind the mirror as the object is in front of it.
Mirrors
![Page 9: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/9.jpg)
Mirrors
![Page 10: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/10.jpg)
Assume θ << 1
Mirrors
2
2
2 2
cos 12
11 for 1
1
12cos 2 2
1 12 2 2 2
RIf 0, f = ==>
2
a aa
R R
R Rf R
h
R
![Page 11: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/11.jpg)
For h = 10 cm., R = 2m. Find f.
Example
![Page 12: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/12.jpg)
Incident beam travels left to right, reflected light travels right to left.
Distance is measured from plane of mirror.
Object is on the left of a mirror, then object distance s < 0.
Image to the left of a mirror, then object distance s’>0 (virtual image). Image to the right of a mirror, then image distance s’< 0 (real image).
Mirror Conventions
![Page 13: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/13.jpg)
For converging mirror, focal length f > 0.
For diverging mirror, focal length f < 0.
Mirror Conventions
![Page 14: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/14.jpg)
Example
![Page 15: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/15.jpg)
Example
![Page 16: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/16.jpg)
Think of the last time you viewed yourself in a mirror.(a) Assuming that the mirror surface is perfectly
flat, what are its radius of curvature and its focal length?
(b) Is the image formed by the mirror real or virtual?
Example
![Page 17: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/17.jpg)
The simplest type of camera is the pinhole camera.
The sharpness of the image depends on the diameter of the hole.
If it is too large, the image is blurred.
Thus, as the pinhole is small, the image improves in clarity until a certain pinhole size.
Camera
![Page 18: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/18.jpg)
The advantage of a pinhole camera apart from its simplicity is that all objects are in focus on the screen.
The depth of field of the camera is unlimited.
The disadvantage of pinhole camera is that it admits limited light, so that it is not suitable in freezing the action of moving objects.
Some put a converging lens to improve the brightness and sharpness of the image.
Camera
![Page 19: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/19.jpg)
The aperture, which admits light to the film, is variable and coordinated with the exposure time (shutter speed).
The light power incident at the image plane is expressed as
Camera
2
2
area of aperature
area of image
where D = diameter of aperture
d = diameter fo image
e
DE
d
![Page 20: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/20.jpg)
A lens of f = 4 cm is stopped down to an aperture of 0.5 cm (D). What is the relative aperture or f-number?
Example
![Page 21: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/21.jpg)
From the figure above, the depth of field is (s2 – s1) that may be expressed as
Camera
20 0
2 1 4 2 2 20
2 ( )
fwhere A =
D d = largest acceptable diameter
Ads s f fs s
f A d s
![Page 22: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/22.jpg)
We clearly see that although the interval is symmetric about s0’ in image space, the depth of field interval is not symmetric about s0.
Camera
Large D Small D
More light collected. (slower film, fast action)
Better depth of field.
Better spatial resolution
![Page 23: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/23.jpg)
Human eye
Source: Wikipedia
![Page 24: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/24.jpg)
There are 3 well-known defects in vision due to errors of refraction of the eyes.
◦ Near-sightedness (Myopia): Longer distance from cornea to retina than usual.
◦ Far-sightedness (Hyperopia): Shorter distance from cornea to retina than normal.
◦ Astigmatism: Unequal (asymmetric curvatures) in the corneal surface.
Human eye
![Page 25: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/25.jpg)
Note: The distance for best viewing for adult is 25 cm.
Human eye
![Page 26: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/26.jpg)
GTLE:
Near-sighted person
1 1 1
If s is large, s = f
Since this is a diverging lens, s < 0.
s f s
![Page 27: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/27.jpg)
A near-sighted person has a far point of 100 cm and a near point of 15 cm.(a) What f of the lens should be to move the far
point to infinity?(b)With this correction lens, can this person read a
book at the normal near point (25 cm from the eye)?
Example
![Page 28: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/28.jpg)
The magnifying glass is used for better spatial resolution in image.
On the other words, it helps us to see smaller objects or to be able to distinguish finer features.
Magnifying glass
![Page 29: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/29.jpg)
Magnifying glass
1 1 1
f > 0, s < 0, s , this yields s < 0 (virtual image)
1
s f s
f
s sM
s f
![Page 30: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/30.jpg)
What does “20x lens” mean?
Example
![Page 31: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/31.jpg)
The magnification of small objects is achieved by the use of two postitive lenses: objective lens and an eyepiece.
Microscope
![Page 32: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/32.jpg)
The magnification is approximated by
The standard tube length is 16 cm.
By viewing with the microscope, the image formation may be drawn as
Microscope
0
.e
e
s TM
f f
![Page 33: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/33.jpg)
Example
![Page 34: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/34.jpg)
Example
![Page 35: Fundamental of Optical Engineering Lecture 3. Aberration happens when the rays do not converge to a point where it should be. We may distinguish the](https://reader030.vdocuments.site/reader030/viewer/2022020417/56649e495503460f94b3ca3c/html5/thumbnails/35.jpg)
Telescope