frameless shop fronts and patch systems frameless shop fronts. and patch fittings. ghi frameless...

Download FRAMELESS SHOP FRONTS AND PATCH   SYSTEMS FRAMELESS SHOP FRONTS. AND PATCH FITTINGS. GHI Frameless Glass Rail

Post on 29-Apr-2018

225 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • RAIL SYSTEMS

    FRAMELESS SHOP FRONTSAND PATCH FITTINGS

    GHI Frameless Glass Rail

  • PATCH FITTINGS ANDPATCH DOOR SPECIFICATIONS

    DL900B

    Lock with hook for sliding door

    DL900C

    Lock keeper for DL900B

    DL900

    DL900A

  • PATCH FITTINGS ANDPATCH DOOR SPECIFICATIONS

  • PATCH FITTINGSDOOR ASSEMBLY

    PATCH FITTINGS ANDPATCH DOOR SPECIFICATIONS

  • BOTTOM PATCH

    FRAMELESS SHOP FRONTSAND PATCH FITTINGS

    DL 100

    Bottom patch to suit most floor springs or free Pivots

    (DL-08)

    Actual size: 164mm x 52mm Pivot point at 55mm or 65mm To suit 10, 12 or 15mm glass

    TOP PATCHDL 200

    Top patch to suit most 15mm diameter top pivots

    Actual size: 164mm x 52mm Pivot point at 55mm or 65mm To suit 10, 12 or 15mm glass

    TOP PATCHDL 220

    Top patch to suit concealed overhead closers

    Actual size: 164mm x 52mm Pivot point at 65mm To suit 10, 12 or 15mm glass

  • FRAMELESS SHOP FRONTSAND PATCH FITTINGS

    DL 300

    Top patch to suit highlite (above door) complete with

    mounting flange plate

    With pivot (DL30003-1) Actual size: 164mm x 52mm Pivot point at 55mm or 65mm To suit 10, 12 or 15mm glass

    DL 400

    Top patch to suit highlite and sidelite

    With pivot (DL30003-1) Actual size: 218mm x 52mm Pivot point at 55mm or 65mm To suit 10, 12 or 15mm glass

    DL 410L/R

    Top patch to suit highlite and sidelite with fin assembly

    With pivot (DL30003-1) With stop (DL30003-2) Actual size: 218mm x 52mm x 111mm (return) Pivot point at 55mm or 65mm To suit 10, 12 or 15mm glass Specify left or right

    TOP PATCH

    TOP PATCH

    TOP PATCH

  • TOP/BOTTOMCORNER PATCH LOCK

    FRAMELESS SHOP FRONTSAND PATCH FITTINGS

    DL 800

    Top or bottom corner patch lock complete with single

    throw lock

    Specify: key/key or key/turn Actual size: 164mm x 52mm Bolt projection 20mm (Sguard) To suit 10 or 12mm glass

    CENTREPATCH LOCK DL 810

    Top or bottom corner patch lock complete with single

    throw lock

    Specify: key/key or key/turn Actual size: 164mm x 52mm Bolt projection 20mm (Sguard) To suit 10 or 12mm glass

    CENTREPATCH LOCK KEEP DL 820

    Top or bottom corner patch lock complete with single

    throw lock

    Specify: key/key or key/turn Actual size: 164mm x 52mm Bolt projection 20mm (Sguard) To suit 10 or 12mm glass

  • SIDE CONNECTOR

    FRAMELESS SHOP FRONTSAND PATCH FITTINGS

    DL 862

    Side connector for hold fixed panel or support fin bracket

    To suit 10 or 12mm glass

    LOCK KEEPERDL 830

    Top patch lock keeper to suit DL-800

    Actual size: 164mm x 52mm To suit 10 or 12mm glass

    LOCK BOXDL 840

    Double overpanel lock box to suit DL-800 corner locks

    LOCK BOLTDL 860B

    Lock bolt with key without cut in the glass

    To suit 10 or 12mm glass

  • ACCESSORIES FORPATCH FITTINGS

  • ACCESSORIES FORPATCH FITTINGS

  • SPIDERFITTINGS

    V0011DL10-1

    V0002DL11-2

    V0001DL11-4

    V0006DL10-2

    V0004DL11-1

    V0012DL11-3